[Federal Register Volume 59, Number 55 (Tuesday, March 22, 1994)]
[Unknown Section]
[Page 0]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: X94-40322]


[[Page Unknown]]

[Federal Register: March 22, 1994]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

 

National Highway Traffic Safety Administration

49 CFR Part 571

[Docket No. 93-87; Notice 1]
RIN 2127-AF03

Federal Motor Vehicle Safety Standards; Metric Conversion

Correction

    In proposed rule document 94-5486 beginning on page 11962, in the 
issue of Tuesday, March 15, 1994, make the following corrections:


Sec. 571.120  [Corrected]

    1.On page 11967, in the second column, in Sec. 571.120, in 
paragraph S5.3.2 Rim, under the heading Truck Example and subheading 
SUITABLE TIRE-RIM CHOICE, in the seventh line, ``with 7.50---29-(D) 
tires,'' should read ``with 7.50---20-(D) tires,''.
    2.On page 11968, in the 1st column, in Sec. 571.120, in paragraph 
S5.1.1 Labels., in the 11th line, ``or'' should read ``of''.
    3.On the same page, in the same column, in Sec. 571.120 (d), in the 
eighth line,`` (------ Ft.)'' should read ``(------ Cubic Ft.)''.


Sec. 571.207  [Corrected]

    4.On page 11969, in the third column, in Sec. 571.207 (b), in the 
eighth line, ``from'' should read ``front''; and in the second line 
from the bottom, ``2.495'' should read ``2,495''.

BILLING CODE 1505-01-D