Congressional Record, Volume 167 Issue 93 (Thursday, May 27, 2021)

[Congressional Record Volume 167, Number 93 (Thursday, May 27, 2021)]
[Senate]
[Pages S3549-S3851]
From the Congressional Record Online through the Government Publishing Office [www.gpo.gov]

ENDLESS FRONTIER ACT--Resumed

The ACTING PRESIDENT pro tempore. Under the previous order, the
Senate will resume consideration of S. 1260, which the clerk will
report.
The senior assistant legislative clerk read as follows:

A bill (S. 1260) to establish a new Directorate for
Technology and Innovation in the National Science Foundation,
to establish a regional technology hub program, to require a
strategy and report on economic security, science, research,
innovation, manufacturing, and job creation, to establish a
critical supply chain resiliency program, and for other
purposes.

Pending:

Schumer amendment No. 1502, in the nature of a substitute.
Cantwell amendment No. 1527 (to amendment No. 1502), of a
perfecting nature.

[[Page S3550]]

Mr. McCONNELL. Madam President, I suggest the absence of a quorum.
The ACTING PRESIDENT pro tempore. The clerk will call the roll.
The senior assistant legislative clerk proceeded to call the roll.
Mr. THUNE. Madam President, I ask unanimous consent that the order
for the quorum call be rescinded.
The ACTING PRESIDENT pro tempore. Without objection, it is so
ordered.

Automated Vehicles

Mr. THUNE. Madam President, from the beginning, the story of the U.S.
auto industry has been one of ingenuity, of taking risks, and of
pushing forward.
At the dawn of the 20th century, most Americans could hardly
comprehend the idea of the automobile. Yet, 20 years later, they had
become nearly ubiquitous in American life, thanks to the insistence of
entrepreneurs like Henry Ford on making the automobile affordable for
the majority of Americans.
The democratization of the automobile, rather than the invention of
the automobile itself, is, in my opinion, one of most remarkable and
uniquely American success stories.
Automobiles allowed Americans to capitalize on the economic dynamism
of the roaring twenties and helped Americans move and adapt during the
Great Depression.
They contributed greatly to the American industrial base and the
know-how needed to fight and win the Second World War and help propel
the United States to its current status as a preeminent global economic
and military power.
Visionary investments like the Interstate Highway System made cars a
staple in American economic and cultural life. And cars certainly made
it a lot easier to get to and from rural America. In a place like rural
South Dakota, with limited public transportation, the automobile, often
a pickup or an SUV, is typically the only way to get around.
Today, the automobile industry stands on the brink of a new
technological revolution, which promises to dramatically transform
mobility once again.
Over the past three decades, the internet has transformed our economy
and our way of life, and the next generation of the internet, 5G, which
is currently being deployed across the Nation, will enable a host of
new innovations, including a revolution in vehicle technology:
automated vehicles or what we call AVs.
AVs will change the way that we move in numerous ways, making the
transportation system safer, more efficient, and more accessible.
Individuals whose mobility is currently limited, for example,
Americans with disabilities, could gain new independence with the
deployment of automated vehicles, allowing them to work or visit
friends and family safely and easily.
I am proud that my proposed AV amendment to the Endless Frontier Act
was recently endorsed by the National Federation of the Blind, and I
ask for unanimous consent that the letter of endorsement be inserted in
the Record
There being no objection, the material was ordered to be printed in
the Record, as follows:

National Federation of the Blind,

May 11, 2021.
Hon. Maria Cantwell,
Chair, U.S. Senate Committee on Commerce, Science, &
Transportation, Washington, DC.
Hon. Roger Wicker,
Ranking Member, U.S. Senate Committee on Commerce, Science, &
Transportation, Washington, DC.
Dear Chair Cantwell and Ranking Member Wicker: The National
Federation of the Blind, the nation's transformative civil
rights organization of the blind, supports and endorses the
amendment to the Endless Frontier Act filed with the
committee by Senator Thune on May 10, 2021. Specifically, we
support the portions of the amendment that will create an
exemption classification for manufacturers who provide
transportation access for people with disabilities and
prohibit discriminatory licensing practices for highly
automated vehicles.
Subsection (d)(2)(C) of the amendment would create an
exemption category under the federal motor vehicle safety
standards located in Section 30113 of title 49 United States
Code that would ``provide transportation access for
individuals with disabilities, including non-visual access
for individuals who are blind or visually impaired.'' This
addition to the law will provide the incentive needed for
automobile manufacturers to ensure that the unique
requirements for Americans with disabilities to be able to
operate automated vehicles are considered in the early stages
of development.
Subsection (e)(3) of the amendment would mandate that a
state ``may not issue a motor vehicle operator's license for
the operation or use of a highly automated vehicle in a
manner that discriminates on the basis of disability.'' This
will ensure that current requirements necessary to obtain a
driver's license, like a vision test, will not be required in
order to operate or use a highly automated vehicle. We are
pleased to see this subsection included in the amendment
because highly automated vehicles will pilot themselves (SAE
Level 4 and Level 5), making a vision requirement arbitrary
and discriminatory.
Highly automated vehicles have the potential to
revolutionize the transportation landscape, especially for
individuals with disabilities. However, those same
individuals with disabilities who stand to gain the most from
the creation and proliferation of highly automated vehicles
could be left out of this new frontier if specific actions
are not taken. Senator Thune's amendment to the Endless
Frontier Act is an important step to ensure that America's
journey toward automotive automation is fully inclusive of
those who will benefit most.
Sincerely,

Mark A. Riccobono,

President.

Mr. THUNE. Madam President, imagine a farmer in rural South Dakota
who can no longer drive to get to town for appointments, prescriptions,
or groceries--enter the automated vehicle.
This technology has potential to keep people in their homes and
communities longer.
Moreover, AVs have potential to greatly increase roadway safety.
Currently, there are an average of more than 35,000 traffic fatalities
on our Nation's roadways each year, including pedestrian, motorcycle,
and bicycle fatalities. Automated vehicles could dramatically--
dramatically--reduce that number. Distracted driving, driving while
impaired--automated vehicles could eliminate those dangers.

For automated vehicle technology to advance, it is imperative that
the regulatory framework catch up with private-sector innovation. That
is why I have pushed for the enactment of AV legislation over the years
and why I had hoped--I had hoped--that we would be voting to add my
automated vehicles amendment to the legislation before the Senate
today.
I have spent nearly 5 years--5 years--working in a bipartisan manner
on a legislative framework to govern the testing and deployment of
automated vehicles. The amendment I offered to the bill before us today
is an amendment that I had hoped to be able to offer with bipartisan
support. It would have paved the way for expanded testing and
deployment of automated vehicles in the United States under the
oversight of the National Highway Traffic Safety Administration.
And let me emphasize that oversight point. My amendment would ensure
that automated vehicles would not--not--touch pavement without the
National Highway Traffic Safety Administration's certification that
they are at least as safe as a conventional vehicle. The data gathered
from the vehicles deployed as a result of this amendment would be
crucial to the development of future motor vehicle safety standards for
AVs.
Unfortunately, bipartisan agreement on my amendment collapsed when
special interests expressed their opposition, despite major efforts to
accommodate their concerns. And I am deeply disappointed that, once
again, Democrats yielded to pressure from special interests against the
best interests of our economy and the American people.
Advancing AV technology is not just a vehicle safety issue. It is
also an issue of U.S. leadership and global competitiveness. Investing
in the production of AV technology here in the United States would not
only strengthen the resilience of the auto industry but also the
Nation's industrial base and our national security.
The auto industry touches nearly every American State. For example,
Horton in Britton, SD, manufactures engine cooling systems, providing
steady, good paying jobs for that community and strengthening the local
economy. The same story repeats itself countless times in communities
all across the Nation.
Providing millions of jobs and investing billions annually, the
American auto industry is a critical component of the nation's economy.
Right now,

[[Page S3551]]

U.S. companies lead the world in AV technology, but other nations, like
China, are seizing upon regulatory inaction and striving to take the
lead. If we don't move forward with automated vehicle technology, we
will soon see some other nation leading the AV revolution.
The legislative package before us today is designed to bolster the
global competitiveness of the United States.
It is pretty difficult to understand why this reasonable and, I might
add, no cost AV amendment that would lead to untold benefits for our
Nation's transportation system, does not fit in. How can a bill making
strong investments in artificial intelligence, quantum computing, and
advanced manufacturing exclude a legislative framework for AVs?
Are we really going to back down from leading the world in automated
innovation and technology and cede the future of this industry to
nations like China? Will we really ignore the enormous--enormous--
safety benefits of these vehicles just to suit Democrats' political
convenience?
More than a century ago, when the automobile was invented, there were
plenty of skeptics, but America's automobile pioneers did not let that
stop them. They seized the moment and pressed forward and ushered in a
transportation revolution. We can do that again today or we can cede
this moment to nations like China and let the American automobile
industry fall permanently behind. That is the choice in front of us. I
hope we will choose to seize this moment and pass the legislation we
need to usher in another American transportation revolution.
I yield the floor.
I suggest the absence of a quorum.
The ACTING PRESIDENT pro tempore. The clerk will call the roll.
The senior assistant legislative clerk proceeded to call the roll.
The PRESIDING OFFICER (Mr. Schatz). The Senator from Illinois.
Ms. DUCKWORTH. Mr. President, I ask unanimous consent that the order
for the quorum call be rescinded.
The PRESIDING OFFICER. Without objection, it is so ordered.

Cloture Motion

The PRESIDING OFFICER. Pursuant to rule XXII, the Chair lays before
the Senate the pending cloture motion, which the clerk will state.
The bill clerk read as follows

Cloture Motion

We, the undersigned Senators, in accordance with the
provisions of rule XXII of the Standing Rules of the Senate,
do hereby move to bring to a close debate on Schumer
substitute amendment No. 1502 to Calendar No. 58, S. 1260, a
bill to establish a new Directorate for Technology and
Innovation in the National Science Foundation, to establish a
regional technology hub program, to require a strategy and
report on economic security, science, research, innovation,
manufacturing, and job creation, to establish a critical
supply chain resiliency program, and for other purposes.
Charles E. Schumer, Jacky Rosen, Patrick J. Leahy, Brian
Schatz, Richard J. Durbin, Benjamin L. Cardin, Robert
P. Casey, Jr., Christopher A. Coons, Gary C. Peters,
Angus S. King, Jr., Sheldon Whitehouse, Chris Van
Hollen, Maria Cantwell, Mazie K. Hirono, Tammy
Duckworth, Tina Smith, Ben Ray Lujan.

The PRESIDING OFFICER. By unanimous consent, the mandatory quorum
call has been waived.
The question is, Is it the sense of the Senate that debate on
Amendment No. 1502 offered by the Senator from New York, Mr. Schumer,
to S. 1260, a bill to establish a new Directorate for Technology and
Innovation in the National Science Foundation, to establish a regional
technology hub program, to require a strategy and report on economic
security, science, research, innovation, manufacturing, and job
creation, to establish a critical supply chain resiliency program, and
for other purposes, shall be brought to a close?
The yeas and nays are mandatory under the rule.
The clerk will call the roll.
The bill clerk called the roll.
Mr. THUNE. The following Senators are necessarily absent: the Senator
from Tennessee (Mrs. Blackburn) and the Senator from Missouri (Mr.
Blunt).
(Mr. KING assumed the Chair.)
(Mr. VAN HOLLEN assumed the Chair.)
The PRESIDING OFFICER (Ms. Cortez Masto). Are there any other
Senators in the Chamber desiring to vote?
The yeas and nays resulted--yeas 68, nays 30, as follows:

[Rollcall Vote No. 214 Leg.]

YEAS--68

Baldwin
Bennet
Blumenthal
Booker
Brown
Cantwell
Capito
Cardin
Carper
Casey
Cassidy
Collins
Coons
Cornyn
Cortez Masto
Crapo
Daines
Duckworth
Durbin
Ernst
Feinstein
Gillibrand
Graham
Hassan
Heinrich
Hickenlooper
Hirono
Hyde-Smith
Kaine
Kelly
King
Klobuchar
Leahy
Lujan
Manchin
Markey
McConnell
Menendez
Merkley
Murkowski
Murphy
Murray
Ossoff
Padilla
Peters
Portman
Reed
Risch
Romney
Rosen
Rounds
Sasse
Schatz
Schumer
Shaheen
Sinema
Smith
Stabenow
Tester
Tillis
Van Hollen
Warner
Warnock
Warren
Whitehouse
Wicker
Wyden
Young

NAYS--30

Barrasso
Boozman
Braun
Burr
Cotton
Cramer
Cruz
Fischer
Grassley
Hagerty
Hawley
Hoeven
Inhofe
Johnson
Kennedy
Lankford
Lee
Lummis
Marshall
Moran
Paul
Rubio
Sanders
Scott (FL)
Scott (SC)
Shelby
Sullivan
Thune
Toomey
Tuberville

NOT VOTING--2

Blackburn
Blunt

The PRESIDING OFFICER. On this vote, the yeas are 68, the nays are
30.
Three-fifths of the Senators duly chosen and sworn having voted in
the affirmative, the motion is agreed to.
The motion was agreed to.
The PRESIDING OFFICER. The Senator from Washington.

Order Of Business

Ms. CANTWELL. Madam President, I ask unanimous consent that it be in
order to call up the Crapo-Wyden amendment No. 1562, as modified with
the changes at the desk; and that following disposition of the Rubio
amendment No. 1802, the Senate vote on amendment No. 1562 with 60
affirmative votes required for adoption.
The PRESIDING OFFICER. Is there objection?
Without objection, it is so ordered.
The Senator from Florida.

Amendment No. 1802 to Amendment No. 1527

Mr. RUBIO. Madam President, I call up the Rubio amendment 1802 to the
Cantwell amendment 1527.
The PRESIDING OFFICER. The clerk will report.
The senior legislative clerk read as follows:

The Senator from Florida [Mr. Rubio] proposes an amendment
numbered 1802 to amendment No. 1527.

Mr. RUBIO. Madam President, I ask that the reading of the amendment
be dispensed with.
The PRESIDING OFFICER. Without objection, it is so ordered.
The amendment is as follows

Purpose: To protect the United States against efforts of China and
other foreign entities to engage in economic espionage and to
misappropriate United States intellectual property, research and
development, and innovation efforts

At the appropriate place, insert the following:

SEC. __. COUNTERINTELLIGENCE AND NATIONAL SECURITY
PROTECTIONS.

(a) Counterintelligence Screening Process.--
(1) Establishment.--The Director of National Intelligence,
the Director of the National Counterintelligence and Security
Center, and the Director of the Federal Bureau of
Investigation shall jointly establish a counterintelligence
screening process to protect the United States against
efforts of China and other foreign entities to engage in
economic espionage and to misappropriate United States
intellectual property, research and development, and
innovation efforts.
(2) Functions.--Subject to the joint direction and control
of the Director of National Intelligence, the Director of the
National Counterintelligence and Security Center, and the
Director of the Federal Bureau of Investigation, the
counterintelligence screening process established under
paragraph (1) shall assess and screen all funds provided
under this Act (including grants awarded under this Act) for
potential national security threats.
(3) Funding.--Amounts required to carry out the process
established under paragraph (1) shall be derived from amounts
appropriated to carry out this Act.
(b) Protections.--
(1) Certification required for receipt of amounts.--
Notwithstanding any other provision of this Act, no person
may receive any amount (including an amount as part of a
grant awarded under this Act) or purchase, lease, or
otherwise obtain any intellectual property developed through
a grant awarded under this Act, unless the Director of
National Intelligence, the Director of the National
Counterintelligence and Security Center, and the Director of
the Federal Bureau

[[Page S3552]]

of Investigation jointly certify that the person has
sufficient protections in place to protect against
misappropriation of United States intellectual property,
research and development, and innovation efforts, and other
threats from foreign governments and other entities.
(2) Certification requirements.--Notwithstanding any other
provision of this Act, no certification may be made under
paragraph (1) with respect to a person unless such person
discloses to the Director of National Intelligence, the
Director of the National Counterintelligence and Security
Center, and the Director of the Federal Bureau of
Investigation the following:
(A) Any funding received by the person from a foreign
source during the most recent 10-year period.
(B) Any financial or in-kind support received by the person
from any entity--
(i) owned or controlled by the Government of the People's
Republic of China; or
(ii) in which the Government of the People's Republic of
China has an ownership interest.
(C) Any participation of the person in a foreign government
talent recruitment program, consistent with section 2303.
The PRESIDING OFFICER. The Senator from Idaho.

Amendment No. 1562, as Modified, to Amendment No. 1502

Mr. CRAPO. Madam President, I call up my amendment No. 1562, as
modified with the changes at the desk, and ask that it be reported by
number.
The PRESIDING OFFICER. The clerk will report the amendment by number.
The senior assistant legislative clerk read as follows:

The Senator from Idaho [Mr. Crapo] for himself and others,
proposes an amendment numbered 1562, as modified, to
amendment No. 1502.

=========================== NOTE ===========================

On page S3552, May 27, 2021, first column, the following
appears: The Senator from Idaho [Mr. Crapo] for himself and
others, proposes an amendment numbered 1562, as modified, to
amendment No. 1802.

The online Record has been corrected to read: The Senator from
Idaho [Mr. Crapo] for himself and others, proposes an amendment
numbered 1562, as modified, to amendment No. 1502.

========================= END NOTE =========================

The amendment is as follows

(Purpose: To ensure trade is conducted consistent with American values,
to ensure resiliency in critical supply chains, to improve transparency
and administration of trade programs and oversight and accountability
of trade agencies, and to promote American competitiveness)

At the end, add the following:

DIVISION G--TRADE ACT OF 2021

SEC. 70001. SHORT TITLE; TABLE OF CONTENTS.

(a) Short Title.--This division may be cited as the ``Trade
Act of 2021''.
(b) Table of Contents.--The table of contents for this
division is as follows:

Sec. 70001. Short title; table of contents.
Sec. 70002. Appropriate congressional committees defined.

TITLE I--TRADING CONSISTENT WITH AMERICAN VALUES

Subtitle A--Preventing Importation of Goods Produced by Forced Labor

Sec. 71001. Investigations of allegations of goods produced by forced
labor.
Sec. 71002. Preventing importation of seafood and seafood products
harvested or produced using forced labor.

Subtitle B--Addressing Censorship and Barriers to Digital Trade

Sec. 71011. Censorship as a trade barrier.
Sec. 71012. Designation of official responsible for monitoring unfair
trade practices of suppliers of information and
communications equipment.
Sec. 71013. Negotiation of digital trade agreements.

Subtitle C--Protecting Innovators and Consumers

Sec. 71021. Technical and legal support for addressing intellectual
property rights infringement cases.
Sec. 71022. Improvement of anti-counterfeiting measures.
Sec. 71023. Reports on chicken, beef, and other meat imports.
Sec. 71024. Joint enforcement with allies with respect to importation
of goods made with stolen intellectual property.
Sec. 71025. Sense of Congress and report on ensuring reliable supply of
rare earth minerals.

Subtitle D--Ensuring a Level Playing Field

Sec. 71031. Report on manner and extent to which the Government of the
People's Republic of China exploits Hong Kong to
circumvent United States laws and protections.
Sec. 71032. Assessment of overcapacity of industries in the People's
Republic of China.
Sec. 71033. Duties of Interagency Center on Trade Implementation,
Monitoring, and Enforcement.
Sec. 71034. Briefing on report related to process for excluding
articles imported from the People's Republic of China
from certain duties imposed under section 301 of the
Trade Act of 1974.

TITLE II--ENSURING RESILIENCY IN CRITICAL SUPPLY CHAINS

Sec. 72001. Facilitating trade in essential supplies.
Sec. 72002. Supply chain database and toolkit.

TITLE III--IMPROVING TRANSPARENCY AND ADMINISTRATION OF TRADE PROGRAMS
AND OVERSIGHT AND ACCOUNTABILITY OF TRADE AGENCIES

Sec. 73001. Process for exclusion of articles from duties under section
301 of the Trade Act of 1974.
Sec. 73002. Enhanced congressional oversight of the United States Trade
Representative and the Department of Commerce.
Sec. 73003. Establishment of Inspector General of the Office of the
United States Trade Representative.
Sec. 73004. Authority of U.S. Customs and Border Protection to
consolidate, modify, or reorganize customs revenue
functions.
Sec. 73005. Protection from public disclosure of personally
identifiable information contained in manifests.
Sec. 73006. Sense of Congress on leadership at World Trade
Organization.

TITLE IV--PROMOTING AMERICAN COMPETITIVENESS

Subtitle A--Reauthorization and Reform of Generalized System of
Preferences

Sec. 74001. Modification of eligibility criteria for beneficiary
developing countries.
Sec. 74002. Supplemental reviews and reporting.
Sec. 74003. Extension of Generalized System of Preferences.

Subtitle B--Temporary Duty Suspensions and Reductions

Sec. 74011. Reference.

PART I--New Duty Suspensions and Reductions

Sec. 74021. Shelled pine nuts.
Sec. 74022. Licorice extract.
Sec. 74023. Refined Carrageenan.
Sec. 74024. Irish dairy chocolate crumb.
Sec. 74025. Pepperoncini, preserved in vinegar.
Sec. 74026. Coconut water in PET bottles.
Sec. 74027. 9,11-Octadecadienoic acid.
Sec. 74028. Liquid galacto-oligosaccharides.
Sec. 74029. Beverage containing coconut water.
Sec. 74030. Animal feed additive containing guanidinoacetic acid.
Sec. 74031. Tungsten concentrate.
Sec. 74032. Piperylene.
Sec. 74033. Normal paraffin M (alkanes C10-C14).
Sec. 74034. Neodymium (Nd) metal.
Sec. 74035. Praseodymium (Pr) metal.
Sec. 74036. Heavy rare earth metals, dysprosium (Dy) metal and terbium
(Tb) metal.
Sec. 74037. Scandium crystal.
Sec. 74038. Hexafluorotitanic acid.
Sec. 74039. Silica gel cat litter with tray.
Sec. 74040. Dioxosilane spherical particles (mean particle size 0.046-
0.054 mm).
Sec. 74041. Silica gel cat litter.
Sec. 74042. Sulfuryl dichloride.
Sec. 74043. FS-10D acicular electroconductive tin oxide.
Sec. 74044. Certain potassium fluoride.
Sec. 74045. Other potassium fluoride.
Sec. 74046. LiPF6.
Sec. 74047. LiPO2F2.
Sec. 74048. Ammonium fluoroborate.
Sec. 74049. Sodium tetrafluoroborate.
Sec. 74050. Ferric chloride.
Sec. 74051. Ferrous chloride.
Sec. 74052. Cupric chloride dihydrate.
Sec. 74053. Copper chloride anhydrous.
Sec. 74054. Manganese chloride anhydrous.
Sec. 74055. Manganese chloride tetrahydrate.
Sec. 74056. Reducing agent.
Sec. 74057. Manganese carbonate.
Sec. 74058. Potassium tetraborate.
Sec. 74059. Potassium pentaborate.
Sec. 74060. Ammonium thiocyanate.
Sec. 74061. Modified amine complex of boron trifluoride.
Sec. 74062. Trichlorosilane.
Sec. 74063. 1,3-Dichloropropene.
Sec. 74064. Hexafluoroisobutylene (HFIB).
Sec. 74065. 1,1,1,2,2,3,3,4,4,5,5,6,6-Tridecafluoro-8-iodooctane.
Sec. 74066. Ethyl benzyl chloride.
Sec. 74067. Perfluoroalkyl sulfonate.
Sec. 74068. D-Mannitol.
Sec. 74069. 3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluorooctan-1-ol.
Sec. 74070. Phenyl isopropanol.
Sec. 74071. Hydroxytyrosol.
Sec. 74072. 1,6-Dihydroxynaphthalene.
Sec. 74073. Antioxidant for plastics and rubber.
Sec. 74074. Toluhydroquinone (THQ).
Sec. 74075. 1,1,1-Tris(4-hydroxyphenyl)ethane.
Sec. 74076. mPEG6-mesylate.
Sec. 74077. Monoethylene glycol dimethyl ether.
Sec. 74078. Diethylene glycol dimethyl ether.
Sec. 74079. Diethylene glycol dibutyl ether.
Sec. 74080. Tetraethylene glycol dimethyl ether.
Sec. 74081. Glycol diether.
Sec. 74082. Diglycidyl resorcinol ether.
Sec. 74083. Allyl glycidyl ether.
Sec. 74084. Vinylcyclohexane monoxide.
Sec. 74085. Technical grade of butyl glycidyl ether.
Sec. 74086. Aliphatic glycidyl ether.
Sec. 74087. Diglycidyl ether of 1,4-butanediol.
Sec. 74088. Technical grade of the glycidyl ether of cyclohexane
dimethanol.
Sec. 74089. Glycidyl ester of neodecanoic acid.
Sec. 74090. Cumaldehyde.

[[Page S3553]]

Sec. 74091. Cyprinal.
Sec. 74092. Sodium o-formylbenzenesulfonate.
Sec. 74093. Acetylacetone.
Sec. 74094. Acetyl propionyl.
Sec. 74095. Alpha ionone.
Sec. 74096. 2,3,4,5 Tetramethylcyclopent-2-enone.
Sec. 74097. Menthone.
Sec. 74098. L-Carvone.
Sec. 74099. Benzoin.
Sec. 74100. Methyl cyclopentenolone.
Sec. 74101. 2,4-Dihydroxy-1,5-dibenzoylbenzene.
Sec. 74102. Difluorobenzophenone (DFBP).
Sec. 74103. PTMI.
Sec. 74104. Metrafenone.
Sec. 74105. Hexachloroacetone.
Sec. 74106. Fire suppression agent.
Sec. 74107. D(+)-10-Camphor sulfonic acid.
Sec. 74108. Benzyl acetate.
Sec. 74109. Propylene glycol diacetate.
Sec. 74110. Isopropenyl acetate.
Sec. 74111. Diacetin.
Sec. 74112. Cocoamine.
Sec. 74113. Caprylic acid 98%.
Sec. 74114. Fine zinc myristate powder.
Sec. 74115. Fine magnesium myristate powder.
Sec. 74116. Dipentaerythrityl hexahydroxystearate/hexastearate/
hexarosinate.
Sec. 74117. Polyglyceryl-2 triisostearate.
Sec. 74118. Neopentyl glycol diethylhexanoate.
Sec. 74119. Isononyl isononate.
Sec. 74120. Acetyl chloride.
Sec. 74121. Potassium sorbate.
Sec. 74122. Vinyl chloroformate.
Sec. 74123. Permethrin.
Sec. 74124. Sodium benzoate.
Sec. 74125. Benzoic acid, flake.
Sec. 74126. Diethylene glycol dibenzoate.
Sec. 74127. Methyl benzoate.
Sec. 74128. M-Nitrobenzoic acid sodium salt.
Sec. 74129. p-Nitrobenzoic acid.
Sec. 74130. 4-tert Butylbenzoic acid.
Sec. 74131. Sodium adipate.
Sec. 74132. Dimethyl sebacate (DMS).
Sec. 74133. Dodecanedioic acid.
Sec. 74134. Polyhydroxystearic acid of low acid value.
Sec. 74135. Undecanedioic acid.
Sec. 74136. Hexadecanedioic acid.
Sec. 74137. Tetradecanedioic acid.
Sec. 74138. Pentadecanedioic acid.
Sec. 74139. Tridecanedioic acid.
Sec. 74140. Methyl 1-(methoxycarbonyl)cyclopropanecarboxylate (CPDM).
Sec. 74141. Calcium HHPA.
Sec. 74142. Diethyl phthalate.
Sec. 74143. Ammonium lactate.
Sec. 74144. Triethyl 2-hydroxypropane-1,2,3-tricarboxylate.
Sec. 74145. Diisostearyl malate.
Sec. 74146. Salicylic acid.
Sec. 74147. Hexyl salicylate.
Sec. 74148. Alpha-ketogluteric acid.
Sec. 74149. MCPB herbicide.
Sec. 74150. 2,4-D Butoxyethylester.
Sec. 74151. 2-(2,4-Dichlorophenoxy)acetic acid.
Sec. 74152. Diglycolic acid 98%.
Sec. 74153. Tri-iso-butyl phosphate (TiBP).
Sec. 74154. Trimethylphosphite.
Sec. 74155. Organic phosphite.
Sec. 74156. Diethyl sulfate.
Sec. 74157. Diethyl carbonate.
Sec. 74158. Ethyl methyl carbonate.
Sec. 74159. Tetradecoxycarbonyloxy tetradecyl carbonate.
Sec. 74160. Dicetyl peroxydicarbonate.
Sec. 74161. Tetraethyl silicate.
Sec. 74162. tert-Octylamine.
Sec. 74163. Octadecylamine.
Sec. 74164. N'-(3-Aminopropyl)-N'-dodecylpropane-1,3-diamine.
Sec. 74165. 1,10-Diaminodecane.
Sec. 74166. 1,5-Pentanediamine.
Sec. 74167. Dicyclohexylamine.
Sec. 74168. Amantadine hydrochloride 99%.
Sec. 74169. N,N-Dimethylaniline.
Sec. 74170. Paranitroaniline (PNA).
Sec. 74171. Dicloran.
Sec. 74172. N,N-Dimethyl-p-toluidine.
Sec. 74173. Pendimethalin technical.
Sec. 74174. Benzyldimethylamine.
Sec. 74175. Diphenyl diphenylene diamine.
Sec. 74176. Curative for epoxy resin systems.
Sec. 74177. TFMB.
Sec. 74178. S-N-Alkyl-anilin.
Sec. 74179. p-Cresidine.
Sec. 74180. Iminodiacetic acid.
Sec. 74181. 11 Aminoundecanoic acid.
Sec. 74182. L-Orinithine L-aspartate.
Sec. 74183. Iron sodium DTPA.
Sec. 74184. Iron glycinate complex.
Sec. 74185. Copper glycinate complex.
Sec. 74186. Zinc glycinate complex.
Sec. 74187. Manganese glycinate complex.
Sec. 74188. Iron sodium EDDHA.
Sec. 74189. DMF-DMA.
Sec. 74190. Mixtures of DMSO and tetrabutyl ammonium fluoride.
Sec. 74191. Betaine.
Sec. 74192. Prolonium chloride in aqueous solution.
Sec. 74193. N,N-Dimethylacetamide.
Sec. 74194. N,N-Dimethylformamide.
Sec. 74195. DAAM.
Sec. 74196. L-Alanyl L-glutamine.
Sec. 74197. Granular acrylamido-tert-butyl sulfonic acid (ATBS).
Sec. 74198. Glycyl-L-glutamine hydrate.
Sec. 74199. Noviflumuron.
Sec. 74200. Propanil technical.
Sec. 74201. Hexaflumuron.
Sec. 74202. Stabilizer for plastics and rubber.
Sec. 74203. 2-Amino-5-chloro-N,3-dimethylbenzamide.
Sec. 74204. Glycyl-L-tyrosine dihydrate.
Sec. 74205. L-Alanyl-L-tyrosine.
Sec. 74206. Enzalutamide ITS-2.
Sec. 74207. 4-Bromo-2-fluoro-N-methylbenzamide.
Sec. 74208. N-Boc-1-aminocyclobutanecarboxylic acid.
Sec. 74209. N'-(1,3-dimethylbutylidene)-3-hydroxy-2-naphthohydrazide
(BMH) (oil treated).
Sec. 74210. Guanidine sulfamate.
Sec. 74211. Liquid, blocked cycloaliphatic diamine used as crosslinker
for polyisocyanate resins.
Sec. 74212. 3,4-Difluorobenzonitrile.
Sec. 74213. 2-Amino-5-cyano-N,3-dimethylbenzamide.
Sec. 74214. TFMPA.
Sec. 74215. Dimethyl 2,2'-Azobisisobutyrate.
Sec. 74216. Antioxidant/metal deactivator.
Sec. 74217. Benzyl carbazate.
Sec. 74218. Benzene-1,3-dicarbohydrazide.
Sec. 74219. Input for resins, coatings, and other products.
Sec. 74220. Aldicarb.
Sec. 74221. Flubendiamide.
Sec. 74222. Benzobicyclon.
Sec. 74223. Diphenylsulfone (DPS).
Sec. 74224. Phenolic antioxidant.
Sec. 74225. Phenolic antioxidant and heat stabilizer.
Sec. 74226. Phenylchlorothioformate (PTCFM).
Sec. 74227. Methylene bis thiocyanate.
Sec. 74228. Oxamyl.
Sec. 74229. L-Cystine.
Sec. 74230. L-Cysteine.
Sec. 74231. N,N'-Bis-L-alanyl-L-cystine.
Sec. 74232. Lubricant additive.
Sec. 74233. Sodium benzenesulfinate.
Sec. 74234. Thio-ether based co-stabilizer for plastics.
Sec. 74235. L-Cysteine hydrate hydrochloride.
Sec. 74236. Dimercaprol.
Sec. 74237. Monoammonium salt of glyphosate.
Sec. 74238. THPC.
Sec. 74239. Flame retardant for textiles.
Sec. 74240. Glyphosate.
Sec. 74241. Ethephon.
Sec. 74242. Benzene phosphinic acid.
Sec. 74243. HEDP.
Sec. 74244. Trimethylchlorosilane.
Sec. 74245. Chloro-(chloromethyl)-dimethylsilane.
Sec. 74246. Silicone for electronics cleaners.
Sec. 74247. Silicon carrier fluid for active lotions, creams.
Sec. 74248. Vinyltrimethoxysilane.
Sec. 74249. n-Octyltriethoxysilane.
Sec. 74250. Dimethylbis(s-butylamino)silane.
Sec. 74251. Aqueous solution of potassium methyl siliconate.
Sec. 74252. Octyltrimethoxysilane.
Sec. 74253. Octlytriethoxysilane.
Sec. 74254. Amino-propyl-triethoxysilane.
Sec. 74255. Methyltris(sec-butylamino)silane.
Sec. 74256. Methyltris(methylethyl ketoximino)silane (MOS).
Sec. 74257. Heptamethyltrisiloxane.
Sec. 74258. Tetramethyldisiloxane.
Sec. 74259. Dimethylchlorosilane.
Sec. 74260. Dichloromethylsilane.
Sec. 74261. Tris(TFP)-methylcyclo-trisiloxane DR.
Sec. 74262. Tetravinyltetrame thylcyclotetrasiloxane.
Sec. 74263. Divinyltetramethyldisiloxane.
Sec. 74264. Input for plant protection agent.
Sec. 74265. Strawberry furanone.
Sec. 74266. Emamectin benzoate.
Sec. 74267. Gibberellic acid.
Sec. 74268. Rose oxide.
Sec. 74269. Vinylene carbonate.
Sec. 74270. Kasugamycin technical.
Sec. 74271. 2H-Cyclododeca[b]pyran.
Sec. 74272. Bixafen.
Sec. 74273. Fluxapyroxad.
Sec. 74274. 3,5 Dimethylpyrazole.
Sec. 74275. Pyraclonil.
Sec. 74276. Imidazolidinyl urea.
Sec. 74277. Allantoin.
Sec. 74278. Emulsifiable concentrate of Imazalil fungicide.
Sec. 74279. Technical cyazofamid fungicide.
Sec. 74280. Imazalil sulfate.
Sec. 74281. 1,2-Dimethylimidazole.
Sec. 74282. 2-Methylimidazole flakes.
Sec. 74283. Diazolidinyl urea.
Sec. 74284. 1-(2-Aminoethyl)imidazolidin-2-one (AEEU).
Sec. 74285. Zinc pyrithione.
Sec. 74286. Technical Pyriofenone fungicide.
Sec. 74287. Picoxystrobin.
Sec. 74288. Triclopyr BEE.
Sec. 74289. Imazapyr.
Sec. 74290. Tetraniliprole.
Sec. 74291. Cyantraniliprole.
Sec. 74292. Chlorantraniliprole.
Sec. 74293. Chlorpyrifos.
Sec. 74294. Technical Cyclaniliprole insecticide.
Sec. 74295. Regorafenib.
Sec. 74296. N-Butyl-TAD.
Sec. 74297. Hindered amine light stabilizer and phenolic antioxidant.
Sec. 74298. 4-Hydroxy-TEMPO.
Sec. 74299. 2,2,6,6-tetramethylpiperidin-4-ol (TMP).
Sec. 74300. 5-Bromo-2-(3-chloropyridin-2-yl)pyrazole-3-carboxylic acid.
Sec. 74301. 2-Chloro-5-(trifluoromethyl)pyridine.
Sec. 74302. Picarbutrox.
Sec. 74303. 5-amino-3-(trifluromethyl) picolinonitrile (T3630).
Sec. 74304. Dextromethorphan hydrobromide.
Sec. 74305. Ipflufenoquin.
Sec. 74306. THQ.

[[Page S3554]]

Sec. 74307. Pyrithiobac sodium.
Sec. 74308. Larotrectinib sulfate.
Sec. 74309. Ibrutinib.
Sec. 74310. Orthosulfamuron.
Sec. 74311. 5-Bromopyrimidine.
Sec. 74312. Butylthion.
Sec. 74313. P-1062.
Sec. 74314. Carfentrazone Technical.
Sec. 74315. UV absorber 928.
Sec. 74316. UV absorber for industrial coatings.
Sec. 74317. Uniconazole-P.
Sec. 74318. VcMMAE.
Sec. 74319. UVA 360.
Sec. 74320. Trofinetide.
Sec. 74321. Flurazole.
Sec. 74322. Oxathiapiprolin.
Sec. 74323. Certain antimicrobial.
Sec. 74324. Rubber accelerator.
Sec. 74325. 2-Amino benzothiazole.
Sec. 74326. Technical Isofetamid fungicide.
Sec. 74327. Clomazone Technical.
Sec. 74328. NEM salt.
Sec. 74329. AMTC wet cake.
Sec. 74330. Photoinitiator 369.
Sec. 74331. Isatoic anhydride.
Sec. 74332. Oclacitinib maleate.
Sec. 74333. Thiencarbazone-methyl.
Sec. 74334. Penoxsulam technical herbicide.
Sec. 74335. Ethyl 2-sulfamoylbenzoate.
Sec. 74336. Sulfosulfuron.
Sec. 74337. Pyrimisulfan.
Sec. 74338. Purified steviol glycoside, rebaudioside A.
Sec. 74339. Glucosylated steviol glycosides.
Sec. 74340. Hydroxypropyl gamma cyclodextrin.
Sec. 74341. Hydroxypropylated beta cyclodextrin.
Sec. 74342. Methyl beta cyclodextrin.
Sec. 74343. 2'-Fucosyllactose.
Sec. 74344. Ascorbyl glucoside.
Sec. 74345. Dimethylamine borane (DMAB).
Sec. 74346. Elderberry extract concentrate.
Sec. 74347. Disperse Yellow 241.
Sec. 74348. Disperse Orange.
Sec. 74349. Mixtures of Disperse Yellow FD11843 and acetic acid.
Sec. 74350. Disperse Blue 54.
Sec. 74351. Mixtures of several disperse dyes.
Sec. 74352. Mixtures of 4 disperse blue dyes.
Sec. 74353. Mixtures of 4 dyes.
Sec. 74354. Disperse Red 86.
Sec. 74355. Disperse Violet 1.
Sec. 74356. Disperse Blue 60.
Sec. 74357. Mixtures of Disperse Orange 29, Disperse Red 167:1, and
Disperse Blue 56.
Sec. 74358. Disperse Yellow 54.
Sec. 74359. Acid Violet 48.
Sec. 74360. Acid Blue 280.
Sec. 74361. Acid Brown 282.
Sec. 74362. Acid Red 131.
Sec. 74363. Acid Red 249.
Sec. 74364. Acid Yellow 236.
Sec. 74365. Acid Red 407.
Sec. 74366. Acid Yellow 220.
Sec. 74367. Acid Yellow 232.
Sec. 74368. Acid Yellow 235.
Sec. 74369. Acid Yellow 151.
Sec. 74370. Acid Violet 43.
Sec. 74371. Acid Red 33.
Sec. 74372. Acid Black 52.
Sec. 74373. Acid Black 2.
Sec. 74374. Acid Green 25.
Sec. 74375. Basic Brown 23.
Sec. 74376. Basic Violet 11:1 rhodamine dye.
Sec. 74377. Basic Yellow 37.
Sec. 74378. Basic Violet 3.
Sec. 74379. Direct Orange 118.
Sec. 74380. Direct Blue 86.
Sec. 74381. Direct Blue 199.
Sec. 74382. Direct Black 168.
Sec. 74383. Direct Red 227.
Sec. 74384. Direct Yellow 107.
Sec. 74385. Direct Green 26.
Sec. 74386. Direct Yellow 11.
Sec. 74387. Direct Orange 15.
Sec. 74388. Direct Brown 44.
Sec. 74389. Direct Red 81.
Sec. 74390. Direct Yellow 142.
Sec. 74391. Direct Red 80.
Sec. 74392. Direct Red 16.
Sec. 74393. Direct Red 254.
Sec. 74394. Colorant.
Sec. 74395. Direct Yellow 34.
Sec. 74396. Vat Orange 2 dye powder.
Sec. 74397. Vat Violet 13 dye.
Sec. 74398. Vat Brown 3 dye.
Sec. 74399. Vat Red 10 dye powder.
Sec. 74400. Vat Brown 57 dye.
Sec. 74401. Vat Red 31 dye powder.
Sec. 74402. Dye mixtures of Vat Brown 3 and Vat Black 27.
Sec. 74403. Vat Red 13.
Sec. 74404. Vat Yellow 2 dye powder.
Sec. 74405. Vat Yellow 33 dye.
Sec. 74406. Vat Green 1 dye.
Sec. 74407. Vat Green 3.
Sec. 74408. Vat Blue 6 dye.
Sec. 74409. Vat Blue 20 dye.
Sec. 74410. Vat Violet 1.
Sec. 74411. Vat Brown 1 dye.
Sec. 74412. Vat Black 16 dye.
Sec. 74413. Vat Black 25.
Sec. 74414. Vat Black 27.
Sec. 74415. Reactive Yellow 145.
Sec. 74416. Reactive Red 195.
Sec. 74417. Reactive Blue 49.
Sec. 74418. Reactive Blue 72.
Sec. 74419. Reactive Yellow 95 powder.
Sec. 74420. Reactive Red 245.
Sec. 74421. Reactive Brown 11.
Sec. 74422. Mixtures of Reactive Black 5 (Na) (FKP), Reactive Scarlet
F01-0439, and Reactive Orange 131.
Sec. 74423. Reactive Yellow F98-0159.
Sec. 74424. Dye mixtures of Reactive Orange 131 and Reactive Scarlet
F07-0522.
Sec. 74425. Reactive Black 31.
Sec. 74426. Reactive Red 120.
Sec. 74427. Reactive Blue 5.
Sec. 74428. Reactive Orange 13.
Sec. 74429. Reactive Orange 12.
Sec. 74430. Pigment Red 177.
Sec. 74431. Pigment Yellow 110.
Sec. 74432. Pigment Yellow 147.
Sec. 74433. Pigment Orange 64.
Sec. 74434. Pigment Blue 29.
Sec. 74435. Pigment Violet 15.
Sec. 74436. Pigment Blue 14.
Sec. 74437. Solvent Blue 97.
Sec. 74438. Solvent Green 5.
Sec. 74439. Solvent Yellow 98.
Sec. 74440. Solvent Green 7.
Sec. 74441. Solvent Red 195.
Sec. 74442. Solvent Orange 115.
Sec. 74443. Specialty dyes.
Sec. 74444. Solvent Green 3.
Sec. 74445. Solvent Blue 36.
Sec. 74446. Mixtures of Solvent Green 3.
Sec. 74447. Solvent Red 52.
Sec. 74448. Solvent Red 149.
Sec. 74449. Solvent Red 207.
Sec. 74450. Solvent Violet 14.
Sec. 74451. Solvent Yellow 179.
Sec. 74452. Solvent Yellow 131.
Sec. 74453. Hogen Blue XB-20.
Sec. 74454. Solvent Yellow 104.
Sec. 74455. Combination of Fluorescent Brighteners 367 and 371.
Sec. 74456. Fluorescent Brightener CBS-X.
Sec. 74457. Optical Brightener SWN.
Sec. 74458. C.I. Fluorescent Brightener 199:1.
Sec. 74459. Fluorescent Brightener 368.
Sec. 74460. 1,4-Bis(2-cyanostyryl)benzene.
Sec. 74461. Certain manufacturing inputs.
Sec. 74462. Cerium sulfide pigments.
Sec. 74463. Matte pearlescent pigments.
Sec. 74464. Angle-dependent interference pigments.
Sec. 74465. Inorganic Lumilux.
Sec. 74466. Ribbon/Matrix Resin.
Sec. 74467. Bonding agent 2005.
Sec. 74468. Fluoropolymer resin.
Sec. 74469. Zirconium 12 paint drier.
Sec. 74470. Zirconium 24 paint drier.
Sec. 74471. Drier accelerators.
Sec. 74472. Lemon oil.
Sec. 74473. Sulfonic acids, C14-17-sec-alkane, sodium salt.
Sec. 74474. Potassium ethyl octylphosphonate.
Sec. 74475. Intermediate in the production of industrial lubricants.
Sec. 74476. Polyether dispersant.
Sec. 74477. D-Glucopyranose.
Sec. 74478. 2-Dodecoxy-6-(hydroxymethyl)oxane-3,4,5-triol.
Sec. 74479. Mixtures of certain C12-14-alkyl ethers.
Sec. 74480. Manufacturing chemical.
Sec. 74481. Nonionic surfactant.
Sec. 74482. Chemical used in textile manufacturing.
Sec. 74483. Ethoxylated tristyrylphenol phosphate potassium salt.
Sec. 74484. Sodium polycarboxylate, aqueous solution.
Sec. 74485. Aqueous emulsion of a mixture of amine soaps and
miscellaneous other additives.
Sec. 74486. Aqueous dispersion of a mixture of fatty amine and amide
soaps and miscellaneous other additives.
Sec. 74487. Aqueous dispersion of a mixture of fatty amine and amide
soaps and miscellaneous other additives.
Sec. 74488. Photographic gelatin.
Sec. 74489. Ice fountains (class 1.4G).
Sec. 74490. Magic candles containing magnesium powder.
Sec. 74491. Party snappers (Class 1.4G).
Sec. 74492. Fenpyroximate 5SC.
Sec. 74493. Pyrifluquinazon 20SC.
Sec. 74494. Imidacloprid and Muscalure formulations.
Sec. 74495. Formulations of acephate and bifenthrin.
Sec. 74496. Fipronil.
Sec. 74497. Aluminum phosphide.
Sec. 74498. Magnaphos formulations.
Sec. 74499. Formulated oxamyl.
Sec. 74500. Formulated fungicides.
Sec. 74501. Certain fungicides.
Sec. 74502. Prothioconazole, Fluopyram, and Trifloxystrobin fungicides.
Sec. 74503. Prothioconazole, Metalaxyl, and Tebuconazole fungicides.
Sec. 74504. Mancozeb and Chlorothalonil formulations.
Sec. 74505. Mixtures of Picarbutrox and application adjuvants.
Sec. 74506. Mixtures of Tetraconazole and application adjuvants.
Sec. 74507. Mancozeb and Azoxystrobin formulations.
Sec. 74508. Mixtures of Cymoxanil and fumed dioxosilane.
Sec. 74509. Microthiol formulations.
Sec. 74510. Formulations of thiencarbazone-methyl, Iodosulfuron-methyl-
sodium, and dicamba.
Sec. 74511. Thiencarbazone-methyl, Isoxadifenethyl, and Tembotrione
herbicides.
Sec. 74512. Herbicides used on grasses.
Sec. 74513. Thiencarbazone-methyl, Isoxaflutole, and Cyprosulfamide
herbicides.
Sec. 74514. Thiencarbazone-methyl and Iodosulfuron-methylsodium
herbicides.
Sec. 74515. Thiencarbazone-methyl and Mefenpyr-diethyl herbicides.
Sec. 74516. Thifensulfuron-methyl and Tribenuron-methyl formulations.
Sec. 74517. Tribenuron-methyl formulations.
Sec. 74518. Chlorsulfuron and metsulfuron-methyl formulations.

[[Page S3555]]

Sec. 74519. Thifensulfuron-methyl and Fluroxypyr formulations.
Sec. 74520. Aciflurofen formulations.
Sec. 74521. S-Metolachlor and Mestrione herbicides.
Sec. 74522. Metribuzin formulations.
Sec. 74523. Pendimethaline and Metribuzine formulations.
Sec. 74524. Formulations of S-Metolachlor and Metribuzin.
Sec. 74525. Thifensulfuron-methyl and Tribenuron-methyl formulations.
Sec. 74526. Metsulfuron-methyl formulations.
Sec. 74527. Chlorimuron-ethyl formulations.
Sec. 74528. Mixtures of Bromoxynil octanoate and Bromoxynil heptanoate.
Sec. 74529. Sulfometuron-methyl and Metsulfuron-methyl formulations.
Sec. 74530. Chlorimuron-ethyl and Tribenuron-methyl formulations.
Sec. 74531. Formulations containing Tiafenacil.
Sec. 74532. Diuron 80.
Sec. 74533. Flazasulfuron herbicides.
Sec. 74534. Thifensulfuron-methyl formulations.
Sec. 74535. Herbicide for farm and ranch use.
Sec. 74536. Propanil formulations.
Sec. 74537. Thifensulfuron formulations.
Sec. 74538. Tolpyralate and Nicosulfuron herbicides.
Sec. 74539. Mixtures of magnesium salts and application adjuvants.
Sec. 74540. Nisin formulations.
Sec. 74541. Certain fixatives.
Sec. 74542. Fuel oil additives: cold flow improvers containing
poly(ethylene-co-ethenyl acetate).
Sec. 74543. Fuel oil additives: cold flow improvers containing fumarate
vinyl acetate co-polymer.
Sec. 74544. Crude oil additives: cold flow improvers containing
fumarate vinyl acetate copolymer.
Sec. 74545. Pour point depressants.
Sec. 74546. Fuel oil additives: cold flow improvers containing poly
(ethylene-co-ethenyl acetate and vinyl 2-ethyl
hexanoate).
Sec. 74547. Poly(isobutylene) hydroformylation products.
Sec. 74548. Input for rubber products.
Sec. 74549. Mixtures of oligomers as general antioxidants for rubber
tires.
Sec. 74550. Benzene, 2,4-diisocyanato-1,3,5-tris(1-methylethyl)-,
homopolymer.
Sec. 74551. Aromatic amine antioxidants.
Sec. 74552. Antioxidant blends.
Sec. 74553. Antioxidant blends to protect polymers.
Sec. 74554. Synthetic hydrotalcite coated with fatty acid and magnesium
stearate.
Sec. 74555. Silica scorch retarders and polymerization inhibitors.
Sec. 74556. Synthetic hydrotalcite.
Sec. 74557. Light stabilizers for construction products.
Sec. 74558. Light stabilizer for plastics.
Sec. 74559. Preparations of bis(2,4-dichlorobenzoyl) peroxide 50
percent paste.
Sec. 74560. Distilled tall oils.
Sec. 74561. Pyridine, alkyl derivatives.
Sec. 74562. Polyisocyanate crosslinking agents.
Sec. 74563. Bonding agent mixtures.
Sec. 74564. Liquid, chemically modified amine complex of boron
trifluoride.
Sec. 74565. Phthalocyanine derivative.
Sec. 74566. Mixtures of Cocamidopropyl betaine, glycol distearate,
Laureth-4, and water.
Sec. 74567. Mixtures of tall oil mono-, di-, and triglycerides.
Sec. 74568. Tallow-bis(2-hydroxyethyl) amines.
Sec. 74569. Additive mixtures for metalworking fluids.
Sec. 74570. Naphthenic acids.
Sec. 74571. Hydroxytyrosol powders.
Sec. 74572. Secondary alcohol ethoxylates.
Sec. 74573. Ethylene glycol dimerate.
Sec. 74574. Two-part liquid silicone kits.
Sec. 74575. Hydrophobic precipitated silica.
Sec. 74576. Silane, trimethoxyoctyl-, hydrolysis products.
Sec. 74577. 1,1,1-Trimethyl-N-(trimethylsilyl)silanamine hydrolysis
products.
Sec. 74578. Waterborne epoxy curing agents.
Sec. 74579. Preparations based on 1-phenylicosane-1,3-dione.
Sec. 74580. Mixtures of 2-Mercaptopropionic acid, methyl ester, O-ethyl
dithiocarbonate.
Sec. 74581. Epoxy curing agents.
Sec. 74582. Aliphatic amine curing agents.
Sec. 74583. Non-halogenated flame retardants.
Sec. 74584. Ligaphob N 90.
Sec. 74585. Organomodified siloxane.
Sec. 74586. Methyl palmitate-stearate, hydrogenated.
Sec. 74587. Olfine E1010.
Sec. 74588. Certain non-halogenated flame retardants.
Sec. 74589. Flame retardants.
Sec. 74590. Preparations based on acetyl hexapeptide-8 and
pentapeptide-18.
Sec. 74591. Lithium silicon oxide.
Sec. 74592. Branched olefin from propylene polymerization.
Sec. 74593. Polypropylene pellets.
Sec. 74594. Propylene-ethylene copolymer.
Sec. 74595. Ethylene-propylene copolymers.
Sec. 74596. Benzene alkylated with polypropylene.
Sec. 74597. Chlorinated polyolefin.
Sec. 74598. Adsorbent resin.
Sec. 74599. Vinyl chloride-hydroxypropyl acrylate copolymer.
Sec. 74600. Vinyl chloride ethylene copolymer with hydrophic
properties.
Sec. 74601. Fluids with boiling points above 170 C.
Sec. 74602. Formulations of functionalized perfluoropolyether.
Sec. 74603. Perfluoropolyether-urethane acrylate.
Sec. 74604. PVDF homopolymer/PVDF/CTFE copolymer mixtures.
Sec. 74605. Chemically modified PVDF.
Sec. 74606. Fluoropolymer, fluoroethylene-alkyl vinylether alternative
copolymers.
Sec. 74607. Copolymer of vinyl acetate and higher vinyl esters.
Sec. 74608. Food-grade vinyl acetate copolymer.
Sec. 74609. Vinyl chloride ethylene with enhanced properties.
Sec. 74610. Vinyl acetate ethylene copolymer with enhanced properties.
Sec. 74611. Food-grade polyvinyl acetate homopolymers.
Sec. 74612. Acrylic acid/vinylsulphonate random copolymers.
Sec. 74613. Poly(methyl methacrylate) microspheres.
Sec. 74614. Methyl methacrylate crosspolymer microspheres.
Sec. 74615. Styrene acrylate copolymer with enhanced properties.
Sec. 74616. Copolymer for dental use.
Sec. 74617. Vinyl phosphonic acid, acrylic acid copolymer, 20 percent
solution in water.
Sec. 74618. Polyacrylate 33.
Sec. 74619. AA/AMPS copolymer.
Sec. 74620. Flocculant dry polyacrylamides.
Sec. 74621. Sorbitol, propylene oxide, ethylene oxide polymer.
Sec. 74622. Trimethoxysilylpropyl carbamate-terminated polyether.
Sec. 74623. Dimethoxy(methyl)sily lmethylcarbamate-terminated
polyether.
Sec. 74624. Curing agent is used in two- or three-parts epoxy systems.
Sec. 74625. Polyethylene glycol 450.
Sec. 74626. Medicinal intermediate for investigational use.
Sec. 74627. Pegcetacoplan.
Sec. 74628. Aqueous solutions of carboxylic acid-copolymer-salt in
water.
Sec. 74629. Aqueous solutions of a modified polymer bearing hydrophilic
and hydrophobic groups.
Sec. 74630. Dimethylamine/epichlorohydrin/ethylenediamine copolymer.
Sec. 74631. Linear hydroxyl-terminated aliphatic polycarb diol.
Sec. 74632. Short hollow PET fibers.
Sec. 74633. Polytetrahydrofuran.
Sec. 74634. Crystalline polyesters.
Sec. 74635. Liquid crystal polymers.
Sec. 74636. Branched polyesters.
Sec. 74637. High molecular weight co-polyester.
Sec. 74638. High molecular weight co-polyester.
Sec. 74639. Polyester-polyamide dispersants.
Sec. 74640. Nylon-12 micro-spheres.
Sec. 74641. Short nylon-66 fibers.
Sec. 74642. Short nylon 6 fibers, colored.
Sec. 74643. Short triangular nylon 6 fibers.
Sec. 74644. Short star-shaped nylon 6 fibers.
Sec. 74645. Short heart-shaped nylon 6 fibers.
Sec. 74646. PA510 polymer compounds.
Sec. 74647. MXD6 polymer compounds.
Sec. 74648. PA10T polymer compounds.
Sec. 74649. PA10T/10I polymer compounds.
Sec. 74650. Polyurethane aqueous resins.
Sec. 74651. Aqueous resin.
Sec. 74652. Aliphatic polyisocyanate.
Sec. 74653. IPDI and HDI based aliphatic polyisocyanate.
Sec. 74654. HDI/Trimethylol hexyllactone crosspolymer micro-spheres.
Sec. 74655. HDI/PPG/Polycaprolactone crosspolymer micro-spheres.
Sec. 74656. Aromatic isocyanate prepolymer.
Sec. 74657. Blocked polyisocyanate containing solvent.
Sec. 74658. Polyisocyanate adduct for powder coatings.
Sec. 74659. Blocked polyisocyanate for use in can and coil
applications.
Sec. 74660. Polydimethylsiloxane.
Sec. 74661. Silicone resins.
Sec. 74662. Methoxyfunctional methyl-phenyl polysiloxane.
Sec. 74663. Hydrogenpolysiloxane.
Sec. 74664. Methyl silicone resins.
Sec. 74665. Trimethylsiloxysilicate.
Sec. 74666. Epoxy functional polydimethylsiloxane.
Sec. 74667. Polymethylhydrogensiloxane.
Sec. 74668. Vinyl terminated siloxanes.
Sec. 74669. Silicone hybrid resin (solvent free).
Sec. 74670. Hydrogenated polycyclopentadiene resin.
Sec. 74671. Water dispersable HDI based polyisocyanate.
Sec. 74672. Cyanate ester resins for high-end electronic, aerospace,
and industrial applications.
Sec. 74673. Polyethyleneimine, component used in manufacturing medical
devices.
Sec. 74674. Polyhexanide.
Sec. 74675. Ethylene-norbornene copolymer.
Sec. 74676. Cellulose powder.
Sec. 74677. Polymaltotriose.

[[Page S3556]]

Sec. 74678. Chitosan.
Sec. 74679. Plastic drinking straws.
Sec. 74680. Garden hoses.
Sec. 74681. Plastic fittings of perfluoroalkoxy.
Sec. 74682. Low density polyethylene (LDPE) sheeting.
Sec. 74683. Biaxially oriented dielectric polypropylene film.
Sec. 74684. Biaxially oriented polypropylene (BOPP) capacitor-grade
film.
Sec. 74685. Polyester capacitor-grade film.
Sec. 74686. Acid form membranes.
Sec. 74687. Melamine resin foam.
Sec. 74688. Infant bathtubs and basins, of plastics.
Sec. 74689. Boxes, cases, crates, and similar articles of plastics.
Sec. 74690. Nozzles, black, of polypropylene.
Sec. 74691. Tip/cap combinations of polyethylene.
Sec. 74692. Bottles made of LDPE.
Sec. 74693. Plastic nasal irrigator caps for neti pots.
Sec. 74694. Toy character bottle toppers.
Sec. 74695. Melamine platters, other than those presented in sets.
Sec. 74696. Melamine plates, other than those presented in sets.
Sec. 74697. Melamine bowls not presented in sets.
Sec. 74698. Melamine trays not presented in sets.
Sec. 74699. Plastic measuring cups and spoons in sets.
Sec. 74700. Liquid measuring cups.
Sec. 74701. Self-anchoring beverage containers.
Sec. 74702. PVC infant bathtub mats.
Sec. 74703. Reversible playmats.
Sec. 74704. Craft mats.
Sec. 74705. Hangers.
Sec. 74706. Infant bath rinsing cups.
Sec. 74707. Bathtub spout covers.
Sec. 74708. Infant teethers.
Sec. 74709. Lighted dog fetch toys.
Sec. 74710. Certain thermoplastic nylon 3-gang switch wallplates.
Sec. 74711. Manual plastic disposable cutlery dispensers.
Sec. 74712. Ear bulb syringes of clear silicone.
Sec. 74713. PVC inflatable pillows.
Sec. 74714. Self-inflatable queen air mattresses.
Sec. 74715. Plastic clip fasteners.
Sec. 74716. Self-venting spouts for diesel exhaust fluid.
Sec. 74717. Plastic pet carriers.
Sec. 74718. Plastic mixing tips.
Sec. 74719. Cable ties of plastics.
Sec. 74720. Flexible camera mountings.
Sec. 74721. Three-piece camera mount sets.
Sec. 74722. Magnetic swivel clips for cameras.
Sec. 74723. Helmet camera mounts.
Sec. 74724. Short extension poles for use with cameras.
Sec. 74725. Long extension poles for cameras.
Sec. 74726. Swivel mounts for cameras.
Sec. 74727. Tripod camera mounts.
Sec. 74728. Bulk hydraulic hoses.
Sec. 74729. Brake hydraulic hoses.
Sec. 74730. Bulk fabric/metal-reinforced rubber hoses.
Sec. 74731. Disposable gloves.
Sec. 74732. Reusable gloves.
Sec. 74733. Dog and cat apparel.
Sec. 74734. Polycarbonate vanity cases.
Sec. 74735. Aluminum vanity cases.
Sec. 74736. Suitcases with outer surface of aluminum with built-in
zipper locks.
Sec. 74737. Drawstring backpacks with zippered pocket.
Sec. 74738. Laminated recycled reusable shopping tote bags.
Sec. 74739. Tote bags of paper yarn.
Sec. 74740. Reusable shopping style tote bags.
Sec. 74741. Waterproof tote bags.
Sec. 74742. Waterproof duffle bags.
Sec. 74743. Waterproof zippered bags, without handles, of plastic
sheeting.
Sec. 74744. Waterproof backpacks.
Sec. 74745. Waterproof waist packs.
Sec. 74746. Guitar cases.
Sec. 74747. Jewelry boxes.
Sec. 74748. Silicone rubber camera cases with straps.
Sec. 74749. Leather gloves with flip mitts for hunting.
Sec. 74750. Men's leather gloves valued at $18 or more per pair.
Sec. 74751. Belts of calf skin.
Sec. 74752. Bamboo engineered flooring: 12.5-12.9 mm thick.
Sec. 74753. Bamboo engineered flooring: 14.1-14.5 mm thick.
Sec. 74754. Bamboo engineered flooring: 15.7-16.1 mm thick.
Sec. 74755. Strand bamboo flooring: 12.5-12.9 mm thick.
Sec. 74756. Strand bamboo flooring: 14.1-14.5 mm thick.
Sec. 74757. Strand bamboo flooring: 10.9-11.3 mm thick.
Sec. 74758. Chopsticks made of bamboo.
Sec. 74759. Drying racks of wood.
Sec. 74760. Bamboo skewers.
Sec. 74761. Wood blinds with louvered slats.
Sec. 74762. 100 percent cotton woven crimped unbleached fabric.
Sec. 74763. Woven fabrics of cotton, containing 85 percent or more by
weight of cotton, not more than 200 grams per square
meter.
Sec. 74764. 100 percent cotton woven bleached fabric pieces, open
weave.
Sec. 74765. Incontinence underpad fabrics of cotton.
Sec. 74766. Woven fabrics of cotton with an average yarn number between
55 and 60.
Sec. 74767. Woven fabric of cotton of yarn number 69 or higher.
Sec. 74768. Woven fabrics of cotton with an average yarn number
exceeding 68.
Sec. 74769. Incontinence underpad fabrics, cotton, plain weave, of yarn
number 42 or lower.
Sec. 74770. Incontinence underpad fabrics, cotton, plain weave, of yarn
number between 43 and 68.
Sec. 74771. Incontinence underpad fabrics, bleached.
Sec. 74772. Incontinence underpad fabrics, printed.
Sec. 74773. Untwisted filament polyvinyl alcohol yarn, measuring 1,100
to 1,330 decitex.
Sec. 74774. Untwisted filament polyvinyl alcohol yarn.
Sec. 74775. Polypropylene (PP) monofilament.
Sec. 74776. Acrylic fiber tow with an average decitex of 0.9.
Sec. 74777. Black polyester bi-component fibers.
Sec. 74778. Acrylic staple fibers with an average decitex of 2.2, fiber
length of 100 mm.
Sec. 74779. Modacrylic staple fibers not processed for spinning.
Sec. 74780. Short polypropylene fibers.
Sec. 74781. Polyoxadiazole fibers.
Sec. 74782. Artificial staple fibers of viscose rayon, 38-42 mm in
length.
Sec. 74783. Artificial fibers of viscose rayon for the manufacture of
feminine hygiene products.
Sec. 74784. Flame retardant rayon fibers, measuring 4.78 decitex.
Sec. 74785. Flame retardant rayon fibers, measuring 4.55 decitex.
Sec. 74786. Flame retardant rayon fibers, measuring 4.4 decitex.
Sec. 74787. Other flame retardant rayon fibers.
Sec. 74788. Cellulosic man-made viscose rayon staple fibers, measuring
1.3-1.5 decitex.
Sec. 74789. Viscose rayon staple fibers, measuring 1.5-1.67 decitex,
with a fiber length of 38-42 mm.
Sec. 74790. Cellulosic man-made viscose rayon staple fibers, measuring
1.67-2 decitex.
Sec. 74791. Viscose rayon staple fibers, measuring 1-2 decitex, with a
fiber length of 4-8 mm.
Sec. 74792. Viscose staple fibers used in textile, medical, or hygiene
applications.
Sec. 74793. Viscose rayon staple fibers, measuring 1.51-2 decitex, with
a fiber length of 8-16 mm.
Sec. 74794. Viscose rayon staple fibers, measuring 1-1.5 decitex, with
a fiber length of 8-16 mm.
Sec. 74795. Flame retardant viscose rayon staple fibers, with a decitex
of 4.7 mm and a fiber length of 51-60 mm.
Sec. 74796. Viscose rayon staple fibers for nonwoven production.
Sec. 74797. Black viscose rayon staple fibers.
Sec. 74798. Acrylic or modacrylic staple fibers with a decitex of 3-
5.6.
Sec. 74799. Made up hand-cast string-drawn fishing nets.
Sec. 74800. Knitted carpets containing 75 percent or more of cotton,
with a rubber backing.
Sec. 74801. Knitted carpets containing 75 percent or more by weight of
polyester, with a rubber backing.
Sec. 74802. Faux leather fabrics.
Sec. 74803. Grass catcher bags.
Sec. 74804. Oxygenation membrane capillary material.
Sec. 74805. Textile knitted fabrics composed of micromodal and
elastane.
Sec. 74806. Textile technical knitted fabrics combining technical
cotton and elastane.
Sec. 74807. Textile knit fabrics of modal, cashmere, and spandex.
Sec. 74808. Women's and girls' dresses, knitted or crocheted, of
synthetic fibers infused with minerals.
Sec. 74809. Women's and girls' skirts and divided skirts of synthetic
fibers infused with minerals.
Sec. 74810. Women's and girls' knit cardigans or pullovers containing
70 percent or more of silk.
Sec. 74811. Men's and boys' knit cardigans or pullovers of linen.
Sec. 74812. Babies' knit sweaters, pullovers, sweatshirts, waistcoats
(vests), and cardigans, of artificial fibers.
Sec. 74813. Women's and girls' tops, knitted or crocheted, of man-made
fibers infused with minerals.
Sec. 74814. Men's and boy's tops, knitted or crocheted, of man-made
fibers infused with minerals.
Sec. 74815. Men's 3 mm wetsuits.
Sec. 74816. Men's 5.5 and 6.5 mm wetsuits.
Sec. 74817. Men's 3.5 mm wetsuits.
Sec. 74818. Men's 4.5 mm wetsuits.
Sec. 74819. Women's 3 mm wetsuits.
Sec. 74820. Women's 3.5 mm wetsuits.
Sec. 74821. Women's 4.5 mm wetsuits.
Sec. 74822. Women's 5.5 and 6.5 mm wetsuits.
Sec. 74823. Insulated handmuffs of knit polyester.
Sec. 74824. Men's stockingfoot wader bottom subassemblies, of
compressed neoprene.

[[Page S3557]]

Sec. 74825. Men's stockingfoot wader bottom subassemblies, of non-
compressed neoprene.
Sec. 74826. Fishing wader pocket pouch assemblies.
Sec. 74827. Women's coats of man-made woven fibers.
Sec. 74828. Men's or boys' linen woven trousers.
Sec. 74829. Men's or boys' linen woven shorts.
Sec. 74830. Martial arts uniforms.
Sec. 74831. Women's dresses of woven viscose.
Sec. 74832. Girls' woven cotton corduroy trousers.
Sec. 74833. Women's woven waffle shirts.
Sec. 74834. Babies' woven artificial fiber shirts and blouses.
Sec. 74835. Babies' artificial fiber woven jumpsuits, coveralls,
dresses, skirts, skirtalls, or clothing accessories.
Sec. 74836. Women's or girls' linen woven blouses, shirts and shirt-
blouses, and sleeveless tank styles.
Sec. 74837. Women's or girls' linen woven washsuits, sunsuits, or one-
piece playsuits.
Sec. 74838. Women's or girls' linen woven coveralls or jumpsuits.
Sec. 74839. Women's shawls and similar goods, 100 percent silk.
Sec. 74840. Winter cycling gloves.
Sec. 74841. Mattress protectors with toppers.
Sec. 74842. Printed mattress protectors.
Sec. 74843. Lock pocket tents.
Sec. 74844. Dark room tents.
Sec. 74845. Air tube chambered tents.
Sec. 74846. Bi-component microfiber tube mop refills.
Sec. 74847. Microfiber duster refills.
Sec. 74848. RFID mop pads.
Sec. 74849. Microfiber cleaning cloths.
Sec. 74850. Microfiber mop pads.
Sec. 74851. Golf bag bodies with rain hoods and straps.
Sec. 74852. Pillow shells, constructed with gussets.
Sec. 74853. Golf bag body flats.
Sec. 74854. Bathtub elbow rests.
Sec. 74855. Door swings.
Sec. 74856. Under bed restraints.
Sec. 74857. Flat golf bag body components, without bottoms.
Sec. 74858. Bath kneeler.
Sec. 74859. Pillow shells, with oval jacquard weave.
Sec. 74860. Two-piece camera mount kits.
Sec. 74861. Sleeve covers.
Sec. 74862. Sports footwear for men, valued over $20 per pair.
Sec. 74863. Sports footwear for women, valued over $20 per pair.
Sec. 74864. Men's cycling shoes valued over $18 per pair.
Sec. 74865. Women's cycling shoes valued over $16 per pair.
Sec. 74866. Men's golf shoes with outers and uppers of rubber or
plastics, valued over $20 per pair.
Sec. 74867. Golf shoes other than for men, with outers and uppers of
rubber or plastics, valued over $20 per pair.
Sec. 74868. Winter cycling boots for men.
Sec. 74869. Winter cycling boots for women.
Sec. 74870. Men's protective active footwear with waterproof soles,
valued over $26 per pair, covering the ankle.
Sec. 74871. Women's protective active footwear with waterproof soles,
valued over $27 per pair, 15.35-25.4 cm in height.
Sec. 74872. Children's protective active footwear with waterproof
soles, valued over $18 per pair.
Sec. 74873. Men's protective active footwear with waterproof soles,
valued over $27 per pair, 15.35-25.4 cm in height.
Sec. 74874. Children's footwear valued over $15 per pair.
Sec. 74875. Women's protective active footwear, valued over $25 per
pair, 15.35-25.4 cm in height.
Sec. 74876. Women's rubber or plastic footwear covering the ankle with
fox-like banding.
Sec. 74877. Cheer shoes covering the ankle.
Sec. 74878. Footwear for women, with 90 percent of the external surface
of rubber or plastic, valued $15-$22 per pair.
Sec. 74879. Sideline cheer shoes.
Sec. 74880. Men's athletic footwear, valued under $9 per pair.
Sec. 74881. Athletic footwear for women, valued not over $9 per pair.
Sec. 74882. Athletic footwear for children, valued not over $8 per
pair.
Sec. 74883. Men's golf shoes, with outer soles and uppers of rubber or
plastics, not covering the ankle, valued $15 per pair or
over.
Sec. 74884. Golf shoes other than for men, with outer soles and uppers
of rubber or plastics, not covering the ankle, valued $15
per pair or over.
Sec. 74885. Men's rubber/plastic footwear, valued not over $5 per pair.
Sec. 74886. Women's rubber/plastic footwear, valued not over $6 per
pair.
Sec. 74887. Children's athletic shoes with glitter uppers.
Sec. 74888. Cheer shoes with sole less than 12 mm.
Sec. 74889. Men's golf shoes with outers and uppers of rubber or
plastics, valued over $19 per pair.
Sec. 74890. Golf shoes other than for men, outer soles and uppers of
rubber or plastics, valued over $19 per pair.
Sec. 74891. Men's golf shoes, outer soles of rubber, plastics, leather
or composition leather and uppers of leather (except
pigskin uppers).
Sec. 74892. Men's oxford work footwear with metal safety toe and
internal metatarsal protection.
Sec. 74893. Oxford-style leather footwear with metal safety toe and
static dissipating protection.
Sec. 74894. Women's leather footwear, lined with pigskin with zipper,
valued $47-$60 per pair.
Sec. 74895. Women's leather footwear, lined with pigskin, valued $31-
$40 per pair.
Sec. 74896. Women's slip-on cow/calf hair footwear, valued $50-$60 per
pair.
Sec. 74897. Women's leather footwear lined with sheepskin.
Sec. 74898. Women's leather slip-on footwear lined with sheep leather.
Sec. 74899. Women's leather slip-on footwear lined with pigskin.
Sec. 74900. Women's leather footwear, lined with pigskin, valued $21-
$27 per pair.
Sec. 74901. Men's mid-cut work footwear with composite safety toe and
waterproof leather uppers.
Sec. 74902. Men's leather upper footwear, San Crispino construction,
valued over $32 per pair.
Sec. 74903. Men's leather upper athletic footwear.
Sec. 74904. Women's footwear with leather uppers, lined with pigskin,
valued $37-$43 per pair.
Sec. 74905. Women's footwear with leather uppers, lined with pigskin,
valued $88-$102 per pair.
Sec. 74906. Women's footwear with leather uppers, lined with pigskin,
valued $24-$32 per pair.
Sec. 74907. Women's footwear with leather uppers, lined with pigskin,
valued $57-$62 per pair.
Sec. 74908. Women's footwear with leather uppers, strap with closed toe
and open heel.
Sec. 74909. Open toe women's footwear, valued over $23 but not over $27
per pair.
Sec. 74910. Slip-on footwear for women, valued over $24 but not over
$27 per pair.
Sec. 74911. Women's footwear with leather uppers, lined with pigskin,
closed toe or heel with functional zippers on sides.
Sec. 74912. Women's footwear with leather uppers, lined with pigskin,
closed toe or heel with zipper closure, height of 43-48
cm.
Sec. 74913. Women's footwear with leather uppers, lined with pigskin
covering the knee.
Sec. 74914. Women's footwear with leather uppers, lined with pigskin,
closed toe or heel with zipper closure, height of 48-52
cm.
Sec. 74915. Women's footwear with leather uppers, open toe with strap
and buckle, valued $14-$25 per pair.
Sec. 74916. Women's slip-on footwear with bovine leather uppers.
Sec. 74917. Women's footwear with leather uppers, lined with pigskin
with adjustable laces.
Sec. 74918. Men's waterproof leather footwear, valued $27 per pair or
higher.
Sec. 74919. Men's or boys' golf shoes, valued $30 per pair or higher.
Sec. 74920. Competitive cheer shoes with leather uppers.
Sec. 74921. Children's waterproof leather footwear, not covering the
ankle, valued $14 per pair or higher.
Sec. 74922. Women's footwear with leather uppers, open toe with strap
and buckle, valued $12.50-$28 per pair.
Sec. 74923. Women's footwear with leather uppers, closed toe with strap
and buckle.
Sec. 74924. Women's footwear with leather uppers, with strap and
buckle, valued $27-$40 per pair.
Sec. 74925. Women's footwear with leather uppers, with strap and
buckle, valued $12.70-$18.70 per pair.
Sec. 74926. Children's leather upper athletic footwear, valued not over
$9 per pair.
Sec. 74927. Men's athletic type footwear with uppers of textile
materials of vegetable fibers and outer soles of rubber
or plastic with textile flocking.
Sec. 74928. Athletic footwear for men, with a bellows tongue, valued
over $6.50 but not over $12 per pair.
Sec. 74929. Athletic footwear for women, with a bellows tongue, valued
over $6.50 but not over $12 per pair.
Sec. 74930. Athletic footwear for children, bellows tongue, valued over
$6.50 but not over $12 per pair.
Sec. 74931. Athletic footwear for men, valued over $6.50 but not over
$9 per pair.
Sec. 74932. Athletic footwear for children, valued over $6.50 but not
over $9 per pair.

[[Page S3558]]

Sec. 74933. Men's waterproof footwear, valued over $15 per pair,
covering the ankle.
Sec. 74934. Men's waterproof footwear, valued over $13 per pair, not
covering the ankle.
Sec. 74935. Women's waterproof footwear, valued over $15 per pair,
covering the ankle.
Sec. 74936. Women's waterproof footwear, valued over $13 per pair, not
covering the ankle.
Sec. 74937. Cheer shoes with uppers of textile materials.
Sec. 74938. Men's golf shoes, uppers of textile materials.
Sec. 74939. Golf shoes other than for men, uppers of textile materials.
Sec. 74940. Women's footwear with textile uppers and 50 percent or more
of the surface area of which is leather.
Sec. 74941. Shoe and boot covers.
Sec. 74942. Women's footwear with textile uppers, open toes or heels,
valued $15-$30 per pair.
Sec. 74943. Men's textile upper footwear, with open toes or open heels,
valued not over $12 per pair.
Sec. 74944. Women's textile upper footwear, with open toes or open
heels, valued not over $12 per pair.
Sec. 74945. Children's textile upper footwear, with open toes or open
heels, valued not over $12 per pair.
Sec. 74946. Oxford footwear with textile upper and composite toe,
valued at $12-$20 per pair.
Sec. 74947. Oxford-style footwear for men or women with textile uppers,
with an alloy safety toecap and static dissipating
protection.
Sec. 74948. Oxford-style work footwear with steel safety toe and static
dissipating protection.
Sec. 74949. Women's footwear, covering the ankle but not the knee,
valued over $24 per pair.
Sec. 74950. Men's textile upper footwear, not covering the ankle,
valued over $24 per pair.
Sec. 74951. Oxford footwear with textile uppers and composite toe,
valued over $20 per pair.
Sec. 74952. Men's mid-cut footwear with a textile upper and a
protective toe cap.
Sec. 74953. Women's footwear with leather soles and textile uppers,
open toes or heels, valued $12-$24 per pair.
Sec. 74954. Footwear for women valued over $20 but not over $24 per
pair.
Sec. 74955. Women's footwear with leather soles and textile uppers,
valued $15-$20 per pair.
Sec. 74956. Women's footwear with leather soles and textile uppers,
valued $20-$25 per pair.
Sec. 74957. Women's footwear with cork soles and textile uppers.
Sec. 74958. Men's footwear with felt soles, not covering the ankle,
valued $20 per pair or higher.
Sec. 74959. Women's and girls' footwear with cork uppers, valued less
than $25 per pair.
Sec. 74960. Women's footwear with cow/calf hair uppers, valued $35-$40
per pair, covering the ankle.
Sec. 74961. Women's footwear with cow/calf hair uppers, valued $35-$40
per pair, not covering the ankle.
Sec. 74962. Women's footwear with cow/calf hair uppers, valued $19-$25
per pair.
Sec. 74963. Women's footwear with cow/calf hair uppers, valued $50-$55
per pair.
Sec. 74964. Women's footwear, leather soles and rubber/plastic uppers,
valued $16-$18 per pair.
Sec. 74965. Women's footwear with cow/calf hair uppers, valued $19-$34
per pair.
Sec. 74966. Footwear for women, valued over $50 but not over $60 per
pair.
Sec. 74967. Calf hair upper footwear.
Sec. 74968. Gaiters of man-made fibers.
Sec. 74969. Hats of vegetable fibers.
Sec. 74970. Hairnets.
Sec. 74971. Cotton knit hats, valued $8 or less.
Sec. 74972. Babies' woven cotton hats.
Sec. 74973. Hats of man-made fiber, valued $5-$25.
Sec. 74974. Waterproof and insulated hats with ear flaps, valued over
$15.
Sec. 74975. Fishing wading staffs.
Sec. 74976. Plastic plants for aquariums, not glued or bound.
Sec. 74977. Natural stone ledger tile of sandstone.
Sec. 74978. Marble mosaic and pebble tiles.
Sec. 74979. Natural stone limestone tiles.
Sec. 74980. Natural stone marble tiles.
Sec. 74981. Waterjet natural stone mosaic tile.
Sec. 74982. Marble entertaining and serveware.
Sec. 74983. Articles of marble for kitchen and dining room.
Sec. 74984. Natural stone ledger tiles of travertine.
Sec. 74985. Travertine decorative tile.
Sec. 74986. Limestone decorative tiles.
Sec. 74987. Blank, embossed, and printed stoneware coaster disks and
trivets.
Sec. 74988. Rolled green glass sheets.
Sec. 74989. Framed rear-view mirrors.
Sec. 74990. Wall mirrors, unframed.
Sec. 74991. Wall mirrors, framed.
Sec. 74992. Stemware (crystalline) drinking glasses valued over $0.30
but not over $3 each, other than those presented in sets.
Sec. 74993. Double-walled insulated glass tumblers.
Sec. 74994. Diamond-shaped stemmed wine glasses.
Sec. 74995. Twisted-center stemless wine glass.
Sec. 74996. Crystalline drinking glasses, without stems, not in sets.
Sec. 74997. Double-walled insulated glass bowls.
Sec. 74998. Leaf-shaped glass decanters.
Sec. 74999. Set of four appetizer plates made of glass with steel caddy
holder, valued at $2 each.
Sec. 75000. Spice rack with glass jars and wooden lids valued not over
$3 each.
Sec. 75001. Glass lens blanks for infrared applications.
Sec. 75002. Hair accessories of glass beads, imitation pearls, and
imitation stones, valued less than $7.
Sec. 75003. Filter bags with acid-resistant coating, of woven
fiberglass laminated to ePTFE, weighing at least 325 g/
m\2\ but not over 350 g/m\2\.
Sec. 75004. Fiberglass replacement wicks for outdoor garden torch.
Sec. 75005. Filter bags of woven fiberglass fabric laminated to an
ePTFE, with a polytetrafluoroethylene coated backing, not
acid resistant, weighing at least 721 g/m\2\ but not over
771 g/m\2\.
Sec. 75006. Silver catalyst.
Sec. 75007. Silver round blanks.
Sec. 75008. Ferroboron alloy.
Sec. 75009. Cast iron nonmalleable threaded main body combo castings
for residential fuel oil tanks.
Sec. 75010. Cast iron nonmalleable threaded vent caps for residential
fuel oil tanks.
Sec. 75011. Cast iron nonmalleable threaded bushings for residential
fuel oil tanks.
Sec. 75012. Cast iron nonmalleable threaded tank adapters for
residential fuel oil tanks.
Sec. 75013. Cast iron nonmalleable threaded fill alarm main body for
residential fuel oil tanks.
Sec. 75014. Cast iron nonmalleable threaded fill box caps for
residential fuel oil tanks.
Sec. 75015. Cast iron nonmalleable threaded leg flanges for residential
fuel oil tanks.
Sec. 75016. Portable gas cooking stoves.
Sec. 75017. Portable outdoor cookers.
Sec. 75018. Self-anchored beverage containers.
Sec. 75019. Stainless steel handmade kitchen sinks.
Sec. 75020. Loose frame baskets.
Sec. 75021. Two-story fire escape ladders.
Sec. 75022. Three-story fire escape ladders.
Sec. 75023. Work support stands of steel.
Sec. 75024. Locking fixtures of iron or steel.
Sec. 75025. Stainless steel phone handle-and-stand accessories.
Sec. 75026. Circular and S-shaped stainless steel carabiners.
Sec. 75027. Pieces of refined unwrought copper cathode 99.9999 percent
pure.
Sec. 75028. Ultra-thin and wide-width aluminum foil.
Sec. 75029. Etched capacitor aluminum foil of a thickness 0.018-0.126
mm.
Sec. 75030. Stove top coffee makers.
Sec. 75031. Aluminum shower caddies.
Sec. 75032. Step stools of aluminum.
Sec. 75033. Aluminum ladders.
Sec. 75034. Circular and S-shaped aluminum carabiners.
Sec. 75035. Stationary sprinklers of zinc.
Sec. 75036. Tungsten waste and scrap.
Sec. 75037. Cobalt alloys.
Sec. 75038. Certain gallium (Ga).
Sec. 75039. Niobium (columbium) rings no thicker than 20 mm.
Sec. 75040. Tungsten secondary raw material.
Sec. 75041. Gear-driven bolt cutters and pipe cutters.
Sec. 75042. Rotary cutters.
Sec. 75043. Food graters.
Sec. 75044. Hand tools for applying plastic clip fasteners to garments.
Sec. 75045. Steel workstations with vises adjustable by foot pedal.
Sec. 75046. Fixed carbide cutter and roller cone drill bits.
Sec. 75047. Rotary food graters.
Sec. 75048. Coffee presses.
Sec. 75049. Vacuum insulated coffee servers with a brew-through lid.
Sec. 75050. Vacuum insulated coffee servers with no lid.
Sec. 75051. Vacuum insulated coffee servers with fitted hinged lid.
Sec. 75052. Commercial vacuum insulated coffee servers with sight
gauge.
Sec. 75053. Commercial vacuum insulated coffee servers with plastic
base.
Sec. 75054. Commercial vacuum insulated coffee servers with plastic
base and stand.
Sec. 75055. Craft knives with fixed pen-like or retractable blades.
Sec. 75056. Craft knives.
Sec. 75057. Blades for craft knives with non-fixed blades.
Sec. 75058. Ergonomic pinking shears.
Sec. 75059. Spring-action scissors.
Sec. 75060. Electronic locks for lockers.
Sec. 75061. Luggage locks of base metal, packaged for retail sale.

[[Page S3559]]

Sec. 75062. Key-operated door handles, push-pull-rotate.
Sec. 75063. Vent mounted magnetic mobile phone holder for automobiles.
Sec. 75064. Dash mounted magnetic mobile phone holder for automobiles.
Sec. 75065. Windshield mounted magnetic mobile phone holder for
automobiles.
Sec. 75066. Steel latches with plastic plungers.
Sec. 75067. Non-key-operated door handles.
Sec. 75068. Curtain rings.
Sec. 75069. Brackets.
Sec. 75070. Curtain rods.
Sec. 75071. Curtain rod hardware.
Sec. 75072. Curtain tiebacks.
Sec. 75073. Curtain rod finials.
Sec. 75074. Curved shower rods.
Sec. 75075. Shower hooks and rings.
Sec. 75076. Straight shower rods.
Sec. 75077. Steel window rods.
Sec. 75078. Antitheft steel cases with digital locks.
Sec. 75079. Stainless steel hose kits.
Sec. 75080. Stainless steel hoses.
Sec. 75081. Wrist watch strap buckles not over 18 mm.
Sec. 75082. Wrist watch strap buckles over 18 mm.
Sec. 75083. Used cylinder heads.
Sec. 75084. Cylinder heads used solely or principally with certain
engines.
Sec. 75085. Engine blocks.
Sec. 75086. Swirler assemblies for turbines.
Sec. 75087. Barrels for fuel mixing.
Sec. 75088. Injector assemblies for certain turbines.
Sec. 75089. Stem assemblies for certain turbines.
Sec. 75090. Tip assemblies for non-gas turbines.
Sec. 75091. High pressure fuel pumps.
Sec. 75092. Dry scroll vacuum pumps 364x333x485 mm.
Sec. 75093. Dry scroll vacuum pumps 297x260x420 mm.
Sec. 75094. Dry scroll vacuum pumps 254x260x420 mm.
Sec. 75095. Dry scroll vacuum pumps 181x140x358 mm.
Sec. 75096. Turbomolecular vacuum pumps.
Sec. 75097. Rotary vane vacuum pumps valued over $500 each.
Sec. 75098. Vacuum diffusion pumps valued over $900 each.
Sec. 75099. Hand- or foot-operated air pumps.
Sec. 75100. Roof vent fans.
Sec. 75101. 12-Amp corded electric leaf blowers.
Sec. 75102. Cordless battery powered leaf blowers not exceeding 20
volts.
Sec. 75103. Cordless battery powered leaf blowers between 20 and 60 V.
Sec. 75104. Fan assemblies for cab climate systems.
Sec. 75105. Aquarium air pumps.
Sec. 75106. Heat pumps for residential use.
Sec. 75107. Heat pumps (outdoor units) for split air conditioner
systems.
Sec. 75108. High-wall indoor units.
Sec. 75109. Single-zone outdoor units.
Sec. 75110. Mini heat pumps for split air conditioner systems.
Sec. 75111. Multi-zone outdoor unit ductless systems.
Sec. 75112. Indoor units of split air conditioner systems.
Sec. 75113. Ductless 18000 BTU heat pumps, single zone inverter.
Sec. 75114. Single-phase heat pump.
Sec. 75115. Steel vacuum pitchers with plastic hinged lid.
Sec. 75116. Oil filters.
Sec. 75117. Battery powered nasal irrigators.
Sec. 75118. Struts to absorb vibration.
Sec. 75119. Table saws (25.4 cm.), operable corded and cordless.
Sec. 75120. Sliding miter saws (25.4 cm) with laser, corded and
cordless.
Sec. 75121. Electromechanical rotary hammers, corded and cordless.
Sec. 75122. Electromechanical hammer impact drivers, corded and
cordless.
Sec. 75123. Rotary hammer drill tools with self-contained electric
motor.
Sec. 75124. Drill driver tools with self-contained electric motor.
Sec. 75125. Extruders.
Sec. 75126. Three-dimensional drawing pens.
Sec. 75127. Professional grade three-dimensional drawing pens.
Sec. 75128. Electric multi-functional blower vacuums.
Sec. 75129. Autosamplers (multisamplers) for liquid chromatographs.
Sec. 75130. Autosamplers (vialsamplers) for liquid chromatographs.
Sec. 75131. Hydraulic hammer assembly.
Sec. 75132. Segmented bladder-operated molds, with more than 25-inch
rim diameter.
Sec. 75133. Used valves for directional control.
Sec. 75134. Keg spears with pressure release valves.
Sec. 75135. Multiport distribution controllers.
Sec. 75136. Subsea modular trees.
Sec. 75137. Flow selector unit-multi-port 6-branch engine crankshafts.
Sec. 75138. Engine crankshafts.
Sec. 75139. Turbocharger journal bearings.
Sec. 75140. Mid-range bearing housings.
Sec. 75141. Heavy duty bearing housings.
Sec. 75142. Fixed ration gear boxes.
Sec. 75143. Track drive gear boxes.
Sec. 75144. Swing bearing assembly.
Sec. 75145. Gears for use in machinery or within engines.
Sec. 75146. 14Y stepper motors.
Sec. 75147. Air door actuators.
Sec. 75148. Servo motors.
Sec. 75149. DC brushed rhombic winding NdFeb magnet motors, with output
under 18.65 W.
Sec. 75150. DC brushed rhombic winding NdFeB magnet motors.
Sec. 75151. DC brushed rhombic winding AlNiCo magnet motors, with
output under 18.65 W.
Sec. 75152. DC brushless rhombic winding NdFeB magnet motors, with
output under 18.65 W.
Sec. 75153. DC brushed rhombic winding NdFeB magnet motors, with output
over 18.65 but not over 37.5 W.
Sec. 75154. DC brushed rhombic winding AlNiCo magnet motors, with
output over 18.65 W but not over 37.5 W.
Sec. 75155. DC brushless slotless rhombic winding NdFeB magnet motors
output over 18.65 W but not over 37.5 W.
Sec. 75156. DC brushed rhombic winding NdFeB magnet motors output over
37.5 W but not over 74.6 W.
Sec. 75157. DC brushless slotless rhombic winding NdFeB magnet motors
output over 37.5 W but not over 74.6 W.
Sec. 75158. Motors.
Sec. 75159. DC motors of an output exceeding 74.6 W but not exceeding
735 W.
Sec. 75160. DC motors, of an output exceeding 74.6 W but not exceeding
735 W.
Sec. 75161. DC brushed rhombic winding NdFeB magnet motors output over
74.6 W but not over 735 W.
Sec. 75162. DC brushless slotless rhombic winding NdFeB magnet motors
output over 74.6 W but not over 735 W.
Sec. 75163. DC motors of an output exceeding 750 W but not exceeding
14.92 kW.
Sec. 75164. DC electric motor for non-aircraft gas turbines.
Sec. 75165. AC alternators.
Sec. 75166. AC alternators with copper windings.
Sec. 75167. Wound stators and rotor assemblies.
Sec. 75168. Rotors.
Sec. 75169. Stators for washing machines, with a 27-tooth design.
Sec. 75170. Stators for washing machines, with an 18-tooth design.
Sec. 75171. Rotors for washing machines, with a height of 60.8 mm.
Sec. 75172. Rotors for washing machines, with a height of 49 mm.
Sec. 75173. 6 V lead-acid storage batteries.
Sec. 75174. 12 V lead-acid storage batteries, used for the auxiliary
source of power.
Sec. 75175. Lead-acid storage batteries, used for wheelchairs.
Sec. 75176. 12 V lead-acid storage batteries, rated at less than 15
ampere-hours.
Sec. 75177. 12 V lead-acid storage batteries, rated at 15 ampere-hours
or more.
Sec. 75178. Cell box assemblies, weighing 15 kg or more but not over 18
kg.
Sec. 75179. Cell box assemblies, weighing 30 kg or more but not over 36
kg.
Sec. 75180. Cell box assemblies, weighing 36 kg or more but not over 49
kg.
Sec. 75181. Cell box assemblies NX.
Sec. 75182. Food processors with a capacity greater than 2.9 liters but
not exceeding 3.1 liters.
Sec. 75183. Food processors with a capacity greater than 1.6 liters but
not exceeding 2.2 liters.
Sec. 75184. Cordless hand blenders.
Sec. 75185. Cordless hand mixers.
Sec. 75186. Corded hand blenders.
Sec. 75187. Burr coffee grinders.
Sec. 75188. Electric food processors with bowl scraper.
Sec. 75189. Electric food processors with snap-locking lid.
Sec. 75190. Electric juice extractors.
Sec. 75191. Electric drink mixers.
Sec. 75192. Spiralizing food processors with a capacity equal to or
greater than 2.36 liters but not exceeding 2.64 liters.
Sec. 75193. Spiralizing food processors with a capacity equal to or
greater than 2.83 liters but not exceeding 3.07 liters.
Sec. 75194. Dicing food processors.
Sec. 75195. Compact food processor with smoothie function.
Sec. 75196. Juice extractors.
Sec. 75197. Integrated baby food making systems.
Sec. 75198. Electric juice mixers and grinders.
Sec. 75199. Ultrasonic humidifiers.
Sec. 75200. Automatic litterboxes, valued no more than $100.
Sec. 75201. Electric toothbrushes.
Sec. 75202. Ultrasonic cool/warm mist humidifiers with aromatherapy.
Sec. 75203. 2-in-1 can opener.
Sec. 75204. Food spiralizing devices.
Sec. 75205. Ceramic bowls.
Sec. 75206. Food grinders for certain electromechanical stand food
mixers.
Sec. 75207. Pasta press extruders for certain stand food mixers.
Sec. 75208. Stainless steel bowls for certain electromechanical stand
food mixers, with capacity greater than 4.2 liters but
not exceeding 4.8 liters.

[[Page S3560]]

Sec. 75209. Stainless steel bowls for certain electromechanical stand
food mixers, with capacity greater than 2.8 liters but
not exceeding 3.4 liters.
Sec. 75210. Stainless steel bowls for certain electromechanical stand
food mixers, with capacity greater than 5.6 liters but
not exceeding 8.6 liters.
Sec. 75211. Pasta rollers and cutters for stand food mixers.
Sec. 75212. Glass bowls for certain electromechanical stand food
mixers.
Sec. 75213. Body trimmers for detailed hair trimming.
Sec. 75214. Hair clipper sets.
Sec. 75215. Rechargeable trimmers for trimming human hair.
Sec. 75216. PCB assemblies for clippers and trimmers.
Sec. 75217. LED bicycle wheel spoke lights.
Sec. 75218. Bicycle rear lights.
Sec. 75219. Portable electric lamps.
Sec. 75220. Space heaters.
Sec. 75221. Microwave ovens with capacity not exceeding 22.5 liters.
Sec. 75222. Microwave ovens with capacity exceeding 22.5 liters but not
exceeding 31 liters.
Sec. 75223. Low-profile microwave ovens with electronic opening
mechanism and integral range hood.
Sec. 75224. Low-profile microwave ovens with push button opening
mechanism and integral range hood.
Sec. 75225. Low-profile microwave ovens with electronic opening
mechanism and without a range hood.
Sec. 75226. Searing grills.
Sec. 75227. Automatic drip coffee makers.
Sec. 75228. Espresso machines.
Sec. 75229. Coffee makers with dishwasher safe removable parts.
Sec. 75230. Single-service coffee makers with milk frothers.
Sec. 75231. Electric coffee makers with dual dispensers.
Sec. 75232. Electric coffee makers for brewing capsules.
Sec. 75233. Automatic or manual pour over coffee makers.
Sec. 75234. Removable reservoir coffeemakers.
Sec. 75235. Single serve coffee makers.
Sec. 75236. 2-way coffee makers with a 12-cup carafe and a pod brewer.
Sec. 75237. Rapid cold brew and hot coffee makers.
Sec. 75238. Electric kettles.
Sec. 75239. Electric toasters with even-toast feature.
Sec. 75240. Electric toasters with 6.5 inch slots.
Sec. 75241. Electric toasters with 37 mm wide slots, with an under-base
cord wrap.
Sec. 75242. 2- and 4- slot toasters, not having a button to keep
toaster contents warm after toasting.
Sec. 75243. 2-slot toasters, with a button to keep toaster content warm
after toasting.
Sec. 75244. Electric toasters with double-slice slots.
Sec. 75245. Electric toasters with 37 mm wide slots, with a retractable
cord.
Sec. 75246. Electric pressure cookers rated more than 800 W but not
more than 1,000 W, with a capacity of not less than 5
liters.
Sec. 75247. Electric pressure cookers rated more than 1,200 W but not
more than 1,400 W, with a capacity of less than 5 liters.
Sec. 75248. Electric pressure cookers rated more than 1,000 W but not
more than 1,200 W, with a capacity of less than 5 liters.
Sec. 75249. Contoured heating pads.
Sec. 75250. Slow cookers with non-stick ceramic coated stoneware.
Sec. 75251. Heating pads.
Sec. 75252. Programmable slow cookers with digital display.
Sec. 75253. 8-Quart electric slow cookers.
Sec. 75254. Programmable slow cookers.
Sec. 75255. Electric slow cookers with locking lid.
Sec. 75256. Double flip waffle makers with removable grids.
Sec. 75257. Ice cream waffle cone and bowl makers.
Sec. 75258. Electric breakfast sandwich makers.
Sec. 75259. Pressure cookers.
Sec. 75260. 10-quart programmable slow cookers.
Sec. 75261. Polished stainless steel 1.5-quart tea kettles.
Sec. 75262. Egg bite makers.
Sec. 75263. Vacuum steel insulated coffee carafes, of a kind used with
deep ultraviolet lithography machines.
Sec. 75264. Vacuum steel insulated carafes for household coffee
machines, of a kind used with deep ultraviolet
lithography machines.
Sec. 75265. Vacuum steel bodies with inner and outer steel layers.
Sec. 75266. Lamp-holder housings of plastic.
Sec. 75267. 660 W, 125 V, lamp-holder with two 15 amp outlets.
Sec. 75268. Combination duplex receptacle/outlet and USB charger, 15-20
amp, 125 V.
Sec. 75269. Range and dryer receptacles.
Sec. 75270. Residential grade receptacles.
Sec. 75271. Residential and commercial USB receptacles.
Sec. 75272. Power strips.
Sec. 75273. Surge protectors.
Sec. 75274. Programmable controllers for architectural lighting.
Sec. 75275. Electronic modular control panels for generators.
Sec. 75276. Power distribution modules and programmable controllers.
Sec. 75277. Glass capacitive touchscreen assemblies with LCD.
Sec. 75278. Lamps containing deuterium gas without radio-frequency
identification (RFID).
Sec. 75279. Lamps containing deuterium gas with radio-frequency
identification (RFID).
Sec. 75280. Fiber channel coaxial cables of silver-plated copper
conductors and expanded ePTFE dielectrics.
Sec. 75281. Insulated coaxial cables, of a kind used with deep
ultraviolet lithography machines.
Sec. 75282. Coaxial cables insulated with ePTFE, vapor sealed, of a
kind used with deep ultraviolet lithography machines.
Sec. 75283. Coaxial cables insulated with ePTFE, non-vapor sealed, of a
kind used with deep ultraviolet lithography machines.
Sec. 75284. Low speed automotive ethernet USB harnesses.
Sec. 75285. High speed autolink cable USB harnesses.
Sec. 75286. Insulated electric conductors, of a kind used with extreme
ultraviolet lithography machines.
Sec. 75287. Insulated electric conductors, of a kind used with deep
ultraviolet lithography machines.
Sec. 75288. Insulated electric conductors, of a kind used with optical
instruments.
Sec. 75289. Rings, blocks, and other insulating fittings of quartz.
Sec. 75290. Front tire splash guards for vehicles.
Sec. 75291. Rear tire splash guards for vehicles.
Sec. 75292. Automatic gear boxes.
Sec. 75293. Suspension systems (struts) for off-highway trucks.
Sec. 75294. Suspension system stabilizer bars.
Sec. 75295. Tie rod assemblies.
Sec. 75296. Used axle housings.
Sec. 75297. Used parts for power trains.
Sec. 75298. Front windshield covers.
Sec. 75299. Expansion chambers.
Sec. 75300. Bicycle racks for car roofs.
Sec. 75301. High pressure fuel injector rails.
Sec. 75302. Stand-up bicycles, having both wheels exceeding 63.5 cm in
diameter.
Sec. 75303. Elliptical cycles, with wheels not exceeding 63.5 cm in
diameter.
Sec. 75304. Bicycle frames, other than of steel, valued $600 or less.
Sec. 75305. Internal gear bicycle hubs, other than two or three speeds.
Sec. 75306. Bicycle pedals other than clipless pedals.
Sec. 75307. Clipless bicycle pedals and parts thereof.
Sec. 75308. Carbon fiber bicycle seatposts.
Sec. 75309. Bicycle handlebar tape, other than silicon or leather tape.
Sec. 75310. Trailer cycles.
Sec. 75311. Dropper seatposts.
Sec. 75312. Bicycle fenders.
Sec. 75313. Bicycle handlebars.
Sec. 75314. Multi-functional steel carts.
Sec. 75315. Non-mechanically propelled industrial hand truck.
Sec. 75316. Moving dollies.
Sec. 75317. Paragliders, paraglider wings and paraglider harnesses.
Sec. 75318. Sailing catamarans and power catamarans.
Sec. 75319. Projection lenses.
Sec. 75320. Mounted optical lenses.
Sec. 75321. Objective lenses for broadcast cameras.
Sec. 75322. Objective lenses for cinema cameras.
Sec. 75323. Magnifying spectacles.
Sec. 75324. LCD television panel assemblies, with a video display
measuring over 175.26 cm.
Sec. 75325. LCD television panel assemblies, with a video display
measuring over 149.86 cm but not over 175.26 cm.
Sec. 75326. LCD television panel assemblies, with a video display
measuring over 139.7 cm but not over 149.86 cm.
Sec. 75327. LCD television panel assemblies, with a video display
measuring over 137.16 cm but not over 139.7 cm.
Sec. 75328. Housings designed for infrared lenses.
Sec. 75329. Electronic temperature indicators, weighing 14.2 g.
Sec. 75330. Electronic temperature indicators, weighing 64.4 g.
Sec. 75331. Electronic temperature indicators, weighing 430 g.
Sec. 75332. Global cargo trackers, weighing 660 g.
Sec. 75333. Temperature data monitors, weighing 115 g.
Sec. 75334. Temperature data monitors, weighing 138.9 g.
Sec. 75335. Temperature data monitors, weighing 133.2 g.
Sec. 75336. Parts and accessories of bicycle speedometers.
Sec. 75337. Wired remote controllers.
Sec. 75338. Analog/digital wrist watches.

[[Page S3561]]

Sec. 75339. Mechanical wrist watches.
Sec. 75340. Mechanical wrist watches with leather or other band.
Sec. 75341. Analog pocket watches.
Sec. 75342. Projection alarm clocks, non-atomic.
Sec. 75343. Projection atomic alarm clocks.
Sec. 75344. Analog wall clocks without thermometer, hygrometer, or
barometer gauges.
Sec. 75345. Analog clocks with thermometer and hygrometer.
Sec. 75346. Atomic analog wall clocks.
Sec. 75347. Atomic digital clocks.
Sec. 75348. Analog kitchen timers.
Sec. 75349. Wrist watch movements having over one jewel and less than 7
jewels.
Sec. 75350. Watch movements having over 7 jewels and under 17 jewels.
Sec. 75351. Watch cases or ``bodies'' over 41 mm in diameter.
Sec. 75352. Watch cases or ``bodies'' not over 41 mm in diameter.
Sec. 75353. Watch case bezels, backs, and centers.
Sec. 75354. Watch case parts.
Sec. 75355. Stainless steel watch bracelets.
Sec. 75356. Watch dials.
Sec. 75357. Watch crowns.
Sec. 75358. Watch hands.
Sec. 75359. Acoustic guitars.
Sec. 75360. Console digital pianos.
Sec. 75361. Grand digital pianos.
Sec. 75362. Electronic 61-key keyboards.
Sec. 75363. Electric guitars and acoustic/electric guitars.
Sec. 75364. Memory foam travel pillows.
Sec. 75365. Lighting for wall installation.
Sec. 75366. Decorative bathroom fan assemblies (lighting fixtures)
assemblies.
Sec. 75367. Metal household floor lamps.
Sec. 75368. Solar powered pathway lights, each measuring between 36.8
cm and 42 cm in height.
Sec. 75369. Solar powered pathway lights, each measuring between 45 cm
and 48 cm in height.
Sec. 75370. Exterior exit viewing lights, dual beam.
Sec. 75371. LED flameless candles.
Sec. 75372. Aquarium LED light strands.
Sec. 75373. LED light modules for bathroom fans/lights.
Sec. 75374. Aquarium LED light sticks.
Sec. 75375. Aquarium LED light strips.
Sec. 75376. Decorative votive candle holders.
Sec. 75377. Candle jar shades.
Sec. 75378. Non-electrical lighting.
Sec. 75379. Outdoor garden or patio torches of bamboo construction.
Sec. 75380. Outdoor garden or patio torches of non-bamboo construction.
Sec. 75381. Indoor oil lamps with base of glass or metal.
Sec. 75382. Outdoor garden torches for tabletop use.
Sec. 75383. Glass lens arrays for spotlights.
Sec. 75384. Lamp shades.
Sec. 75385. Galvanized steel LED downlight housing frames.
Sec. 75386. Aluminum cylinders for LED lighting fixtures.
Sec. 75387. Galvanized steel brackets and plates for LED lighting
fixtures.
Sec. 75388. Aluminum LED downlight reflectors.
Sec. 75389. Outdoor garden torch replacement canisters.
Sec. 75390. Iris subassemblies for moving lights.
Sec. 75391. Zoom modules for automated moving lights.
Sec. 75392. Golf club heads for fairway woods.
Sec. 75393. Golf club shafts for putters.
Sec. 75394. Steel golf club shafts, other than for putters.
Sec. 75395. Golf club shaft assemblies.
Sec. 75396. Graphite driver golf club shafts, extra stiff flex.
Sec. 75397. Graphite hybrid golf club shafts, extra stiff flex.
Sec. 75398. Graphite irons golf club shafts, extra stiff flex.
Sec. 75399. Graphite driver golf club shafts, regular, senior, adult,
or ladies flex.
Sec. 75400. Graphite golf club driver shafts, stiff flex.
Sec. 75401. Graphite hybrid golf club shafts, regular, senior, adult,
or ladies flex.
Sec. 75402. Graphite hybrid golf club shafts, stiff flex.
Sec. 75403. Graphite irons golf club shafts, regular, senior, adult, or
ladies flex.
Sec. 75404. Graphite irons golf club shafts, stiff flex.
Sec. 75405. Pickleball paddles.
Sec. 75406. Pickleballs.
Sec. 75407. Exercise cycles.
Sec. 75408. Stationary trainers.
Sec. 75409. Multimodality fitness equipment, without integrated contact
grip heart rate monitor.
Sec. 75410. Multimodality fitness equipment with integrated power
sensor to measure the user's upper body power input.
Sec. 75411. Parts and accessories for treadmills.
Sec. 75412. Parts and accessories for ellipticals.
Sec. 75413. Parts and accessories for stationary exercise cycles.
Sec. 75414. Parts and accessories for weight training equipment.
Sec. 75415. Parts and accessories for certain exercise equipment
machines.
Sec. 75416. Lateral elliptical machines.
Sec. 75417. Adjustable-weight kettlebells.
Sec. 75418. Adjustable-weight barbell.
Sec. 75419. Exercise cycles with dual-position handgrips.
Sec. 75420. Exercise cycles with single handgrips.
Sec. 75421. Upright exercise cycles.
Sec. 75422. Recumbent exercise cycles with touchscreen consoles.
Sec. 75423. Leaning exercise cycles.
Sec. 75424. Rod gyms, with vertical bench.
Sec. 75425. Rod and resistance gyms, with flat benches.
Sec. 75426. Foldable treadmills, with LCD consoles with control
keypads.
Sec. 75427. Foldable treadmills, with touchscreen consoles measuring
44.5 cm or less.
Sec. 75428. Indoor cycling machines with wireless data touchscreen
displays.
Sec. 75429. Indoor cycling machines with LCD consoles and two water
bottle holders.
Sec. 75430. Indoor cycling machines with LCD consoles and single water
bottle holder.
Sec. 75431. Recumbent elliptical machines.
Sec. 75432. Fitness equipment combining the functions of an elliptical
and a stair stepper, weight over 90 kgs.
Sec. 75433. Foldable treadmills with touchscreen console greater than
44.4 cm.
Sec. 75434. Interactive indoor cycling exercise cycles.
Sec. 75435. Multimodality fitness equipment, with integrated contact
grip heart rate monitors.
Sec. 75436. Fishing reels valued not over $2.70 each, pre-spooled, with
rod and fishing line.
Sec. 75437. Fishing reels valued not over $2.70 each.
Sec. 75438. Hard artificial crankbaits.
Sec. 75439. Collapsible big game decoys.
Sec. 75440. Vacuum steel hinged lid pitchers, not exceeding 1 liter.
Sec. 75441. Vacuum insulated drinkware having a capacity exceeding 1
liter but not exceeding 2 liters.
Sec. 75442. Vacuum insulated drinkware having a capacity exceeding 2
liters but not exceeding 4 liters.
Sec. 75443. Vacuum glass lined steel coffee servers over 2 liters.
Sec. 75444. Vacuum glass lined steel coffee servers over 2 liters with
lever dispensing.

PART II--Existing Duty Suspensions and Reductions

Sec. 75451. Extension of certain existing duty suspensions and
reductions and other modifications.

PART III--Effective Date

Sec. 75461. Effective date.

Subtitle C--Reauthorization of American Manufacturing Competitiveness
Act of 2016

Sec. 75471. Reauthorization of American Manufacturing Competitiveness
Act of 2016.

TITLE V--AUTHORIZATION OF APPROPRIATIONS

Sec. 76001. Authorization of additional appropriations.

TITLE VI--CUSTOMS USER FEES

Sec. 77001. Extension of customs user fees.

SEC. 70002. APPROPRIATE CONGRESSIONAL COMMITTEES DEFINED.

In this division, the term ``appropriate congressional
committees'' means the Committee on Finance of the Senate and
the Committee on Ways and Means of the House of
Representatives.

TITLE I--TRADING CONSISTENT WITH AMERICAN VALUES

Subtitle A--Preventing Importation of Goods Produced by Forced Labor

SEC. 71001. INVESTIGATIONS OF ALLEGATIONS OF GOODS PRODUCED
BY FORCED LABOR.

Section 307 of the Tariff Act of 1930 (19 U.S.C. 1307) is
amended--
(1) by striking ``All'' and inserting the following:
``(a) In General.--All'';
(2) by striking `` `Forced labor', as herein used, shall
mean'' and inserting the following:
``(c) Forced Labor Defined.--In this section, the term
`forced labor' means''; and
(3) by inserting after subsection (a), as designated by
paragraph (1), the following:
``(b) Forced Labor Division.--
``(1) In general.--There is established in the Office of
Trade of U.S. Customs and Border Protection a Forced Labor
Division, which shall--
``(A) receive and investigate allegations of goods, wares,
articles, or merchandise mined, produced, or manufactured
using forced labor; and
``(B) coordinate with other agencies to enforce the
prohibition under subsection (a).
``(2) Prioritization of investigations.--In prioritizing
investigations under paragraph (1)(A), the Forced Labor
Division shall--
``(A) consult closely with the Bureau of International
Labor Affairs of the Department of Labor and the Office to
Monitor and Combat Trafficking in Persons of the Department
of State; and
``(B) take into account--
``(i) the complicity of--

``(I) the government of the foreign county in which the
instance of forced labor is alleged to have occurred; and

[[Page S3562]]

``(II) the government of any other country that has
facilitated the use of forced labor in the country described
in subclause (I);

``(ii) the ranking of the governments described in clause
(i) in the most recent report on trafficking in persons
required by section 110(b)(1) of the Trafficking Victims
Protection Act of 2000 (22 U.S.C. 7107(b)(1));
``(iii) whether the good involved in the alleged instance
of forced labor is included in the most recent list of goods
produced by child labor or forced labor required by section
105(b)(1)(2)(C) of the Trafficking Victims Protection
Reauthorization Act of 2005 (22 U.S.C. 7112(b)(2)(C)); and
``(iv) the effect taking action with respect to the alleged
instance of forced labor would have in eradicating forced
labor from the supply chain of the United States.
``(3) Quarterly briefings required.--Not less frequently
than every 90 days, the Forced Labor Division shall provide
briefings to the Committee on Finance of the Senate and the
Committee on Ways and Means of the House of Representatives
regarding--
``(A) allegations received under paragraph (1);
``(B) the prioritization of investigations of such
allegations under paragraph (2); and
``(C) progress made toward--
``(i) issuing withhold release orders for goods, wares,
articles, or merchandise mined, produced, or manufactured
using forced labor; and
``(ii) making findings in and closing investigations
conducted under paragraph (1).''.

SEC. 71002. PREVENTING IMPORTATION OF SEAFOOD AND SEAFOOD
PRODUCTS HARVESTED OR PRODUCED USING FORCED
LABOR.

(a) Definitions.--In this section:
(1) Child labor.--The term ``child labor'' has the meaning
given the term ``worst forms of child labor'' in section 507
of the Trade Act of 1974 (19 U.S.C. 2467).
(2) Forced labor.--The term ``forced labor'' has the
meaning given that term in section 307 of the Tariff Act of
1930 (19 U.S.C. 1307).
(3) Human trafficking.--The term ``human trafficking'' has
the meaning given the term ``severe forms of trafficking in
persons'' in section 103 of the Trafficking Victims
Protection Act of 2000 (22 U.S.C. 7102).
(4) Seafood.--The term ``seafood'' means fish, shellfish,
processed fish, fish meal, shellfish products, and all other
forms of marine animal and plant life other than marine
mammals and birds.
(5) Secretary.--The term ``Secretary'' means the Secretary
of Commerce, acting through the Administrator of the National
Oceanic and Atmospheric Administration.
(b) Forced Labor in Fishing.--
(1) Rulemaking.--Not later than one year after the date of
the enactment of this Act, the Commissioner of U.S. Customs
and Border Protection, in coordination with the Secretary,
shall issue regulations regarding the verification of seafood
imports to ensure that no seafood or seafood product
harvested or produced using forced labor is entered into the
United States in violation of section 307 of the Tariff Act
of 1930 (19 U.S.C. 1307).
(2) Strategy.--The Commissioner of U.S. Customs and Border
Protection, in coordination with the Secretary and the
Secretary of the department in which the Coast Guard is
operating, shall--
(A) develop a strategy for using data collected under
Seafood Import Monitoring Program to identify seafood imports
at risk of being harvested or produced using forced labor;
and
(B) publish information regarding the strategy developed
under subparagraph (A) on the website of U.S. Customs and
Border Protection.
(c) International Engagement.--The United States Trade
Representative, in coordination with the Secretary of
Commerce, shall engage with interested countries regarding
the development of compatible and effective seafood tracking
and sustainability plans in order to--
(1) identify best practices;
(2) coordinate regarding data sharing;
(3) reduce barriers to trade in fairly grown or harvested
fish; and
(4) end the trade in products that--
(A) are harvested or produced using illegal, unregulated,
or unreported fishing, human trafficking, or forced labor; or
(B) pose a risk of fraud.

Subtitle B--Addressing Censorship and Barriers to Digital Trade

SEC. 71011. CENSORSHIP AS A TRADE BARRIER.

(a) In General.--Chapter 8 of title I of the Trade Act of
1974 (19 U.S.C. 2241 et seq.) is amended by adding at the end
the following:

``SEC. 183. IDENTIFICATION OF COUNTRIES THAT DISRUPT DIGITAL
TRADE.

``(a) In General.--Not later than 60 days after the date on
which the National Trade Estimate is submitted under section
181(b), the United States Trade Representative (in this
section referred to as the `Trade Representative') shall
identify, in accordance with subsection (b), foreign
countries that are trading partners of the United States that
engage in acts, policies, or practices that disrupt digital
trade activities, including--
``(1) coerced censorship in their own markets or
extraterritorially; and
``(2) other eCommerce or digital practices with the goal,
or substantial effect, of promoting censorship or
extrajudicial data access that disadvantages United States
persons.
``(b) Requirements for Identifications.--In identifying
countries under subsection (a), the Trade Representative
shall identify only foreign countries that--
``(1) disrupt digital trade in a discriminatory or trade
distorting manner with the goal, or substantial effect, of
promoting censorship or extrajudicial data access;
``(2) deny fair and equitable market access to digital
service providers that are United States persons with the
goal, or substantial effect, of promoting censorship or
extrajudicial data access; or
``(3) engage in coerced censorship or extrajudicial data
access so as to harm the integrity of services or products
provided by United States persons in the market of that
country, the United States market, or other markets.
``(c) Designation of Priority Foreign Countries.--
``(1) In general.--The Trade Representative shall designate
as priority foreign countries the foreign countries
identified under subsection (a) that--
``(A) engage in the most onerous or egregious acts,
policies, or practices that have the greatest impact on the
United States; and
``(B) are not negotiating or otherwise making progress to
end those acts, policies, or practices.
``(2) Revocations and additional identifications.--
``(A) In general.--The Trade Representative may at any
time, if information available to the Trade Representative
indicates that such action is appropriate--
``(i) revoke the identification of any foreign country as a
priority foreign country under paragraph (1); or
``(ii) identify any foreign country as a priority foreign
country under that paragraph.
``(B) Report on reasons for revocation.--The Trade
Representative shall include in the semiannual report
submitted to Congress under section 309(3) a detailed
explanation of the reasons for the revocation under
subparagraph (A) of the identification of any foreign country
as a priority foreign country under paragraph (1) during the
period covered by the report.
``(d) Publication.--The Trade Representative shall publish
in the Federal Register a list of foreign countries
identified under subsection (a) and foreign countries
designated as priority foreign countries under subsection (c)
and shall make such revisions to the list as may be required
by reason of action under subsection (c)(2).
``(e) Annual Report.--Not later than 30 days after the date
on which the Trade Representative submits the National Trade
Estimate under section 181(b), the Trade Representative shall
submit to the Committee on Finance of the Senate and the
Committee on Ways and Means of the House of Representatives a
report on actions taken under this section during the one-
year period preceding that report, and the reasons for those
actions, including--
``(1) a list of any foreign countries identified under
subsection (a); and
``(2) a description of progress made in decreasing
disruptions to digital trade.''.
(b) Sense of Congress.--It is the sense of Congress that,
in carrying out any revocations or identifications under
section 183(c)(2)(A) of the Trade Act of 1974, as added by
subsection (a), the United States Trade Representative may
consider information contained in the findings from the
investigation of the United States International Trade
Commission entitled ``Foreign Censorship: Trade and Economic
Effects on U.S. Businesses'' (Investigation No. 332-585).
(c) Clerical Amendment.--The table of contents for the
Trade Act of 1974 is amended by inserting after the item
relating to section 182 the following:

``Sec. 183. Identification of countries that disrupt digital trade.''.

SEC. 71012. DESIGNATION OF OFFICIAL RESPONSIBLE FOR
MONITORING UNFAIR TRADE PRACTICES OF SUPPLIERS
OF INFORMATION AND COMMUNICATIONS EQUIPMENT.

The United States Trade Representative shall designate an
official within the Office of the United States Trade
Representative with responsibility for monitoring unfair
trade practices of suppliers of information and
communications equipment, including those suppliers that are
owned, controlled, or supported by a foreign government.

SEC. 71013. NEGOTIATION OF DIGITAL TRADE AGREEMENTS.

(a) In General.--The United States Trade Representative
shall consider the viability and utility of negotiating
digital trade agreements with like-minded countries and to
what degree such agreements may provide an opportunity to
address digital barriers, deter censorship, promote the free
flow of information, support privacy, protect sensitive
information, protect communications regarding human and
worker rights, and promote digitally enabled commerce.
(b) Consultation.--With respect to any negotiations of an
agreement facilitating digital trade, the Trade
Representative shall consult closely and on a timely basis
with the appropriate congressional committees, keep those
committees fully apprised of those negotiations, and provide
to those committees, including staff with appropriate
security clearance, access to the text of any negotiating
proposal of the United States not later than 5 business days
before tabling the proposal in the negotiation.

[[Page S3563]]

Subtitle C--Protecting Innovators and Consumers

SEC. 71021. TECHNICAL AND LEGAL SUPPORT FOR ADDRESSING
INTELLECTUAL PROPERTY RIGHTS INFRINGEMENT
CASES.

(a) In General.--The head of any Federal agency may provide
support, as requested and appropriate, to United States
persons seeking technical, legal, or other support in
addressing intellectual property rights infringement cases
regarding the People's Republic of China.
(b) United States Person Defined.--In this section, the
term ``United States person'' means--
(1) a United States citizen or an alien lawfully admitted
for permanent residence to the United States; or
(2) an entity organized under the laws of the United States
or of any jurisdiction within the United States, including a
foreign branch of such an entity.

SEC. 71022. IMPROVEMENT OF ANTI-COUNTERFEITING MEASURES.

(a) Increased Inspections.--
(1) Report on seizures of counterfeit goods.--Not later
than one year after the date of the enactment of this Act,
and annually thereafter, the Commissioner of U.S. Customs and
Border Protection shall submit to the Committee on Finance of
the Senate and the Committee on Ways and Means of the House
of Representatives a report on seizures by U.S. Customs and
Border Protection of counterfeit goods during the one-year
period preceding submission of the report, including the
number of such seizures disaggregated by category of good,
source country, and mode of transport.
(2) Increased inspections of goods from certain
countries.--The Commissioner shall increase inspections of
imports of goods from each source country identified in the
report required by paragraph (1) as one of the top source
countries of counterfeit goods, as determined by the
Commissioner.
(b) Publication of Criteria for Notorious Markets List.--
Not later than 2 years after the date of the enactment of
this Act, and not less frequently than every 5 years
thereafter, the United States Trade Representative shall
publish in the Federal Register criteria for determining that
a market is a notorious market for purposes of inclusion of
that market in the list developed by the Trade Representative
pursuant to section 182(e) of the Trade Act of 1974 (19
U.S.C. 2242(e)) (commonly known as the ``Notorious Markets
List'').
(c) Publication of Action Plans.--
(1) In general.--Not less frequently than annually, the
Trade Representative shall publish on an publicly available
internet website of the Office of the United States Trade
Representative--
(A) the action plans for priority watch list countries
under section 182(g)(1) of the Trade Act of 1974 (19 U.S.C.
2242(g)(1)) for that year; and
(B) for each priority watch list country with respect to
which such an action plan is prepared, an assessment of the
progress of the country in meeting the benchmarks described
in subparagraph (D) of that section.
(2) Public hearings.--Not less frequently than annually,
the Trade Representative shall hold public hearings to track
the progress of priority watch list countries in meeting the
benchmarks described in subparagraph (D) of section 182(g)(1)
of the Trade Act of 1974 (19 U.S.C. 2242(g)(1)) included in
their action plans under that section.
(3) Priority watch list country defined.--In this
subsection, the term ``priority watch list country'' means a
country identified under section 182(a)(2) of the Trade Act
of 1974 (19 U.S.C. 2242(a)(2)).
(d) Sharing of Information With Respect to Suspected
Violations of Intellectual Property Rights.--Section 628A of
the Tariff Act of 1930 (19 U.S.C. 1628a) is amended--
(1) in subsection (a)(1), by inserting ``, packing
materials, shipping containers,'' after ``its packaging''
each place it appears; and
(2) in subsection (b)--
(A) in paragraph (3), by striking ``; and'' and inserting a
semicolon;
(B) in paragraph (4), by striking the period at the end and
inserting ``; and''; and
(C) by adding at the end the following:
``(5) any other party with an interest in the merchandise,
as determined appropriate by the Commissioner.''.

SEC. 71023. REPORTS ON CHICKEN, BEEF, AND OTHER MEAT IMPORTS.

(a) Agriculture Report on Chicken.--Not later than 180 days
after the date of the enactment of this Act, the Secretary of
Agriculture shall submit to the Committee on Finance of the
Senate and the Committee on Ways and Means of the House of
Representatives a report regarding the efforts of the
Secretary to ensure the safety of imported processed chicken
into the United States.
(b) Report on Country-of-origin Labeling.--Not later than
one year after the date of the enactment of this Act, the
United States Trade Representative, in conjunction with the
Secretary of Agriculture, shall submit to the Committee on
Finance of the Senate and the Committee on Ways and Means of
the House of Representatives a report on the ruling issued by
the World Trade Organization in 2015 on country-of-origin
labeling for beef, pork, and other meat products that
includes--
(1) an assessment of the impact of the ruling on--
(A) consumer awareness regarding the origin of meat
consumed in the United States;
(B) agricultural producers in the United States; and
(C) the security and resilience of the food supply in the
United States; and
(2) if the assessment under paragraph (1) indicates that
the ruling or other market factors in the United States,
including consolidation of meat processors, changes in diet
and preferences, or other factors, have had a negative impact
on consumers in the United States, agricultural producers in
the United States, or the overall security and resilience of
the food supply in the United States, recommendations for
such legislative or administrative action as the Trade
Representative, in conjunction with the Secretary of
Agriculture, considers appropriate--
(A) to better inform consumers in the United States;
(B) to support agricultural producers in the United States;
and
(C) to improve the security and resilience of the food
supply in the United States.

SEC. 71024. JOINT ENFORCEMENT WITH ALLIES WITH RESPECT TO
IMPORTATION OF GOODS MADE WITH STOLEN
INTELLECTUAL PROPERTY.

(a) In General.--Not later than 180 days after the date of
the enactment of this Act, the United States Trade
Representative, in coordination with the Secretary of State,
should seek to enter into negotiations with representatives
from Australia, Canada, the European Union, Japan, New
Zealand, South Korea, and the United Kingdom to stop the
importation of goods made with stolen intellectual property
into the United States and countries that are allies of the
United States.
(b) Report Required.--Not later than one year after the
date of the enactment of this Act, the Trade Representative,
in coordination with the Secretary of State, shall submit a
report on the status of negotiations described in subsection
(a) to--
(1) the Committee on Finance and Committee on Foreign
Relations of the Senate; and
(2) the Committee on Foreign Affairs and the Committee on
Ways and Means of the House of Representatives.

SEC. 71025. SENSE OF CONGRESS AND REPORT ON ENSURING RELIABLE
SUPPLY OF RARE EARTH MINERALS.

(a) Findings; Sense of Congress.--
(1) Findings.--Congress makes the following findings:
(A) The People's Republic of China is the global leader in
mining, refining, and component manufacturing of rare earth
elements, producing approximately 85 percent of the world's
supply between 2011 and 2017.
(B) In 2019, the United States imported an estimated 80
percent of its rare earth compounds from the People's
Republic of China.
(C) On March 26, 2014, the World Trade Organization ruled
that the People's Republic of China's export restraints on
rare earth minerals violated its obligations under its
protocol of accession to the World Trade Organization,
thereby harming United States manufacturers and workers.
(D) The Chinese Communist Party has threatened to leverage
the People's Republic of China's dominant position in the
rare earth market to ``strike back'' at the United States.
(E) The Quadrilateral Security Dialogue is an effective
partnership for reliable multilateral financing, development,
and distribution of goods for global consumption, as
evidenced by the Quad Vaccine Partnership announced on March
12, 2021.
(2) Sense of congress.--It is the sense of Congress that--
(A) the People's Republic of China's dominant share of the
global rare earth mining market is a threat to the economic
stability, well being, and competitiveness of key industries
in the United States;
(B) the United States should reduce reliance on the
People's Republic of China for rare earth minerals through--
(i) strategic investments in development projects,
production technologies, and refining facilities in the
United States; or
(ii) in partnership with strategic allies of the United
States that are reliable trading partners, including members
of the Quadrilateral Security Dialogue; and
(C) the United States Trade Representative should initiate
multilateral talks among the countries of the Quadrilateral
Security Dialogue to promote shared investment and
development of rare earth minerals.
(b) Report Required.--
(1) In general.--Not later than 120 days after the date of
the enactment of this Act, the United States Trade
Representative, in consultation with the officials specified
in paragraph (3), shall submit to the appropriate committees
of Congress a report on the work of the Trade Representative
to address the national security threat posed by the People's
Republic of China's control of nearly \2/3\ of the global
supply of rare earth minerals.
(2) Elements.--The report required by paragraph (1) shall
include--
(A) a description of the extent of the engagement of the
United States with the other countries of the Quadrilateral
Security Dialogue to promote shared investment and
development of rare earth minerals during the period
beginning on the date of the enactment of this Act and ending
on the date of the report; and
(B) a description of the plans of the President to leverage
the partnership of the countries of the Quadrilateral
Security Dialogue

[[Page S3564]]

to produce a more reliable and secure global supply chain of
rare earth minerals.
(3) Officials specified.--The officials specified in this
paragraph are the following:
(A) The Secretary of State.
(B) the Secretary of Commerce.
(C) The Chief Executive Officer of the United States
International Development Finance Corporation.
(4) Appropriate committees of congress defined.--In this
subsection, the term ``appropriate committees of Congress''
means--
(A) the Committee on Finance, the Committee on Foreign
Relations, and the Committee on Energy and Natural Resources
of the Senate; and
(B) the Committee on Ways and Means, the Committee on
Foreign Affairs, and the Committee on Energy and Commerce of
the House of Representatives.

Subtitle D--Ensuring a Level Playing Field

SEC. 71031. REPORT ON MANNER AND EXTENT TO WHICH THE
GOVERNMENT OF THE PEOPLE'S REPUBLIC OF CHINA
EXPLOITS HONG KONG TO CIRCUMVENT UNITED STATES
LAWS AND PROTECTIONS.

Title III of the United States-Hong Kong Policy Act of 1992
(22 U.S.C. 5731 et seq.) is amended by adding at the end the
following:

``SEC. 303. REPORT ON MANNER AND EXTENT TO WHICH THE
GOVERNMENT OF THE PEOPLE'S REPUBLIC OF CHINA
EXPLOITS HONG KONG TO CIRCUMVENT UNITED STATES
LAWS AND PROTECTIONS.

``(a) In General.--Not later than 180 days after the date
of the enactment of this section, the Secretary of State and
the United States Trade Representative shall jointly submit
to the appropriate congressional committees a report on the
manner and extent to which the Government of the People's
Republic of China uses the status of Hong Kong to circumvent
the laws and protections of the United States.
``(b) Elements.--The report required by subsection (a)
shall include the following:
``(1) In consultation with the Secretary of Commerce, the
Secretary of Homeland Security, and the Director of National
Intelligence--
``(A) an assessment of how the Government of the People's
Republic of China uses Hong Kong to circumvent export
controls of the United States; and
``(B) a list of all significant incidents in which the
Government of the People's Republic of China used Hong Kong
to circumvent those controls during the reporting period.
``(2) In consultation with the Secretary of the Treasury
and the Secretary of Commerce--
``(A) an assessment of how the Government of the People's
Republic of China uses Hong Kong to circumvent antidumping or
countervailing duties and duties under section 301 of the
Trade Act of 1974 (19 U.S.C. 2411) on merchandise exported to
the United States from the People's Republic of China; and
``(B) a list of all significant incidents in which the
Government of the People's Republic of China used Hong Kong
to circumvent those duties during the reporting period.
``(3) In consultation with the Secretary of the Treasury,
the Secretary of Homeland Security, and the Director of
National Intelligence--
``(A) an assessment of how the Government of the People's
Republic of China uses Hong Kong to circumvent sanctions
imposed by the United States or pursuant to multilateral
regimes; and
``(B) a list of all significant incidents in which the
Government of the People's Republic of China used Hong Kong
to circumvent those sanctions during the reporting period.
``(4) In consultation with the Secretary of Homeland
Security and the Director of National Intelligence--
``(A) an assessment of how the Government of the People's
Republic of China uses formal or informal means to extradite
or coercively move foreign nationals, including United States
persons, from Hong Kong to the People's Republic of China;
and
``(B) a list of foreign nationals, including United States
persons, who have been formally or informally extradited or
coercively moved from Hong Kong to the People's Republic of
China.
``(5) In consultation with the Secretary of Defense, the
Director of National Intelligence, and the Director of
Homeland Security--
``(A) an assessment of how the intelligence, security, and
law enforcement agencies of the Government of the People's
Republic of China, including the Ministry of State Security,
the Ministry of Public Security, and the People's Armed
Police, use the Hong Kong Security Bureau and other security
agencies in Hong Kong to conduct espionage on foreign
nationals, including United States persons, conduct influence
operations, or violate civil liberties guaranteed under the
laws of Hong Kong; and
``(B) a list of all significant incidents of such
espionage, influence operations, or violations of civil
liberties during the reporting period.
``(c) Form of Report; Availability.--
``(1) Form.--The report required by subsection (a) shall be
submitted in unclassified form, but may include a classified
index.
``(2) Availability.--The unclassified portion of the report
required by subsection (a) shall be posted on a publicly
available internet website of the Department of State.
``(d) Definitions.--In this section:
``(1) Appropriate congressional committees.--The term
`appropriate congressional committees' means--
``(A) the Committee on Foreign Relations, the Committee on
Banking, Housing, and Urban Affairs, the Committee on
Finance, and the Select Committee on Intelligence of the
Senate; and
``(B) the Committee on Foreign Affairs, the Committee on
Financial Services, the Permanent Select Committee on
Intelligence, and the Committee on Ways and Means of the
House of Representatives.
``(2) Foreign national.--The term `foreign national' means
a person that is neither--
``(A) an individual who is a citizen or national of the
People's Republic of China; or
``(B) an entity organized under the laws of the People's
Republic of China or of a jurisdiction within the People's
Republic of China.
``(3) Reporting period.--The term `reporting period' means
the 5-year period preceding submission of the report required
by subsection (a).
``(4) United states person.--The term `United States
person' means--
``(A) a United States citizen or an alien lawfully admitted
for permanent residence to the United States; or
``(B) an entity organized under the laws of the United
States or of any jurisdiction within the United States,
including a foreign branch of such an entity.''.

SEC. 71032. ASSESSMENT OF OVERCAPACITY OF INDUSTRIES IN THE
PEOPLE'S REPUBLIC OF CHINA.

(a) Report on Overcapacity.--
(1) In general.--Not later than one year after the date of
the enactment of this Act, and annually thereafter, the
United States Trade Representative, in consultation with the
Secretary of Commerce, shall submit to the Committee on
Finance of the Senate and the Committee on Ways and Means of
the House of Representatives a report on overcapacity of
industries in the People's Republic of China.
(2) Elements.--The report required by paragraph (1) shall
include--
(A) a determination on whether overcapacity resulting from
industrial policy exists in any major industry in the
People's Republic of China; and
(B) a description of the effects of that overcapacity on
industry in the United States.
(b) Briefing.--Not later than 180 days after a positive
determination of overcapacity under subsection (a)(2)(A), the
Trade Representative shall brief the Committee on Finance of
the Senate and the Committee on Ways and Means of the House
of Representatives regarding the steps taken to address that
overcapacity, which may include--
(1) discussions with allies;
(2) negotiations at an appropriate multilateral institution
to which the United States is a party; and
(3) bilateral negotiations with the People's Republic of
China.
(c) Determination of Substantial Reduction.--Not later than
each of one year and two years after a briefing under
subsection (b) with respect to a positive determination of
overcapacity under subsection (a)(2)(A), the Trade
Representative shall submit to the Committee on Finance of
the Senate and the Committee on Ways and Means of the House
of Representatives a report containing a determination of
whether the steps taken to address that overcapacity are
likely to lead to a substantive reduction in that
overcapacity.

SEC. 71033. DUTIES OF INTERAGENCY CENTER ON TRADE
IMPLEMENTATION, MONITORING, AND ENFORCEMENT.

Section 141(h)(2) of the Trade Act of 1974 (19 U.S.C.
2171(h)(2)) is amended--
(1) by redesignating subparagraphs (C) and (D) as
subparagraphs (D) and (E), respectively; and
(2) by inserting after subparagraph (B) the following:
``(C) investigating practices of countries that are major
trading partners of the United States in order to identify
and address violations of trade agreements and other
practices that have systemic, diffuse impacts on the economy
and workers of the United States or systemic impacts on the
resiliency of multiple critical domestic supply chains;''.

SEC. 71034. BRIEFING ON REPORT RELATED TO PROCESS FOR
EXCLUDING ARTICLES IMPORTED FROM THE PEOPLE'S
REPUBLIC OF CHINA FROM CERTAIN DUTIES IMPOSED
UNDER SECTION 301 OF THE TRADE ACT OF 1974.

Not later than 90 days after the publication by the
Comptroller General of the United States of the report
requested by Congress on July 16, 2019, for an audit into the
process by which the United States Trade Representative has
excluded articles imported from the People's Republic of
China from certain duties imposed under section 301 of the
Trade Act of 1974 (19 U.S.C. 2411), the Trade Representative,
or a designee of the Trade Representative, shall brief the
appropriate congressional committees on the manner in which
the Trade Representative is responding to the findings
contained in that report.

TITLE II--ENSURING RESILIENCY IN CRITICAL SUPPLY CHAINS

SEC. 72001. FACILITATING TRADE IN ESSENTIAL SUPPLIES.

(a) In General.--The Trade Act of 1974 (19 U.S.C. 2101 et
seq.) is amended by adding at the end the following:

[[Page S3565]]

``TITLE X--FACILITATING TRADE IN ESSENTIAL SUPPLIES

``SEC. 1001. DEFINITIONS.

``In this title:
``(1) Committee.--The term `Committee' means the Committee
on Trade in Essential Supplies established under section
1002.
``(2) Crisis preparedness.--The term `crisis preparedness'
means ensuring access to goods in the Strategic National
Stockpile and goods necessary to ensure the continued
functioning of critical infrastructure in a crisis.
``(3) Critical infrastructure.--The term `critical
infrastructure' means systems and assets, whether physical or
virtual, so vital to the United States that the incapacity or
destruction of such systems and assets would have a
debilitating impact on the national security of, or public
health or safety in, the United States, or any combination of
those matters.
``(4) Essential medical supply.--The term `essential
medical supply' means any supply that is part of the
Strategic National Stockpile.
``(5) Essential supply.--The term `essential supply' means
any supply determined by the Trade Representative to be
critical to crisis preparedness, including essential medical
supplies (including personal protective equipment), critical
infrastructure items, and other supplies identified as
essential by the Trade Representative under section 1003(b).
``(6) Strategic national stockpile.--The term `Strategic
National Stockpile' means the stockpile established under
Section 319F-2 of the Public Health Service Act (42 U.S.C.
247d-6b).
``(7) Trade representative.--The term `Trade
Representative' means the United States Trade Representative.
``(8) United states person.--The term `United States
person' means--
``(A) a United States citizen or an alien lawfully admitted
for permanent residence to the United States; or
``(B) an entity organized under the laws of the United
States or of any jurisdiction within the United States.
``(9) Unreliable person.--The term `unreliable person'
means any entity or individual that the Trade Representative
determines works in concert with, or under the influence of,
an unreliable trading partner to engage in the theft or
misappropriation of intellectual property or trade secrets
relating to an essential supply.
``(10) Unreliable trading partner.--The term `unreliable
trading partner' means any country the government of which
the Trade Representative determines--
``(A) engages in systematic theft of intellectual property
or trade secrets; or
``(B) is likely to utilize export restrictions or other
measures to prevent the United States from importing an
essential supply.

``SEC. 1002. COMMITTEE ON TRADE IN ESSENTIAL SUPPLIES IN THE
UNITED STATES.

``(a) Establishment.--There is established a committee, to
be known as the `Committee on Trade in Essential Supplies in
the United States'.
``(b) Membership.--The Committee shall be composed of the
following:
``(1) The Trade Representative, who shall serve as the
chairperson of the Committee.
``(2) The Secretary of Commerce.
``(3) The Secretary of Defense.
``(4) The Secretary of the Treasury.
``(5) The Secretary of Homeland Security.
``(6) The Secretary of State.
``(7) The Secretary of Health and Human Services.
``(8) The Administrator of the Federal Emergency Management
Agency.
``(9) The Secretary of Energy.
``(10) The Secretary of Transportation.
``(11) The heads of such other agencies as the Trade
Representative considers appropriate.
``(c) Duties.--The Committee shall--
``(1) examine United States trade flows and supply chains
for essential supplies;
``(2) prepare and submit reports in accordance with section
1003(c);
``(3) facilitate a whole-of-government strategy to ensure
that the United States has reliable access to essential
supplies from its trading partners; and
``(4) advise private United States enterprises that produce
or procure essential supplies on recognizing potential
threats to their supply chains by identifying unreliable
trading partners and unreliable persons.

``SEC. 1003. IDENTIFICATION OF AND REPORT ON ACCESS TO
ESSENTIAL SUPPLIES.

``(a) Public Comments.--
``(1) Solicitation.--Not later than 60 days after the date
of the enactment of this title, the Trade Representative
shall, on behalf of the Committee, publish a notice
soliciting public comments to facilitate the identification
of essential supplies under subsection (b) and the
preparation of the report required by subsection (c).
``(2) Protection of business confidential information.--The
Trade Representative shall ensure that any business
confidential information that is submitted under this
subsection is properly protected from disclosure.
``(b) Identification of Essential Supplies.--After
reviewing the public comments submitted pursuant to
subsection (a), the Trade Representative shall, in
consultation with the other members of the Committee,
identify supplies that are critical to crisis preparedness
and are to be considered essential supplies for purposes of
this title.
``(c) Report Required.--Not later than one year after the
date of the enactment of this title, and not less frequently
than every 3 years thereafter for the following 9 years, the
Committee shall submit to Congress a report--
``(1) identifying--
``(A) the major producers in the United States and abroad
that produce essential supplies for the United States;
``(B) the duties applied by the United States and major
trading partners to such supplies;
``(C) the aggregate trade flows of essential supplies from
and into the United States; and
``(D) unreliable trading partners and unreliable persons
that have stolen or misappropriated the intellectual property
or trade secrets of United States persons with respect to
essential supplies;
``(2) describing--
``(A) information on foreign trade barriers and other
factors that may affect United States trade in essential
supplies;
``(B) the current domestic manufacturing base and supply
chains for essential supplies, including raw materials and
other goods essential to the production of those supplies;
``(C) the ability of the United States to maintain
readiness and to surge production of essential supplies in
response to an emergency, including by resorting to the
Strategic National Stockpile; and
``(D) the practices and acts of unreliable trading partners
and unreliable persons--
``(i) with respect to the theft or misappropriation of
intellectual property or trade secrets; or
``(ii) that may threaten United States investments in
essential supplies;
``(3) identifying defense, intelligence, homeland,
economic, natural, geopolitical, or other contingencies that
may disrupt, strain, compromise, or eliminate the supply
chain for essential supplies;
``(4) assessing the resiliency and capacity of the domestic
manufacturing base and supply chains to support the need for
those essential supplies, including any single points of
failure in those supply chains;
``(5) assessing flexible manufacturing capacity available
in the United States in cases of emergency; and
``(6) making specific recommendations to ensure--
``(A) the supply of imported essential supplies remains
reliable, including through tariff relief or enforcement
actions against foreign trade barriers;
``(B) domestic stockpiles remain adequate for crisis
preparedness;
``(C) domestic manufacturing capacity and supply chains
remain resilient; and
``(D) United States persons can avoid risks presented by
unreliable trading partners and unreliable persons.''.

``SEC. 1004. FACILITATING ACCESS TO ESSENTIAL MEDICAL
SUPPLIES.

``(a) Authority to Reduce or Suspend Duties on Essential
Medical Supplies.--
``(1) In general.--The President may reduce or suspend the
collection of any duty on any essential medical supply for a
period of not more than 180 days beginning on the date on
which the President submits to the Committee on Finance of
the Senate and the Committee on Ways and Means of the House
of Representatives a certification that the reduction or
suspension is necessary for crisis preparedness.
``(2) Limitation on subsequent action.--If the President
reduces or suspends the collection of a duty on an essential
medical supply under paragraph (1), the President may not
further reduce or suspend duties on that supply under that
paragraph until the date this one year after the preceding
reduction or suspension.
``(b) Temporary Suspension of Duties on Articles Needed to
Combat the COVID-19 Pandemic.--
``(1) In general.--An article described in paragraph (2)
entered, or withdrawn from warehouse for consumption, during
the period specified in paragraph (4) shall enter the United
States free of duty, including free of any duty that may be
imposed as a penalty or otherwise imposed in addition to
other duties, including any duty imposed pursuant to--
``(A) section 301 of the Trade Act of 1974 (19 U.S.C.
2411);
``(B) section 232 of the Trade Expansion Act of 1962 (19
U.S.C. 1862); or
``(C) the International Emergency Economic Powers Act (50
U.S.C. 1701 et seq.).
``(2) Articles described.--An article is described in this
paragraph if the article is--
``(A) classified under any of the statistical reporting
numbers of the Harmonized Tariff Schedule of the United
States specified in paragraph (3); or
``(B) identified by the United States International Trade
Commission, after the date of the enactment of this title, as
an article related to the response to the coronavirus disease
2019 (commonly referred to as `COVID-19') pandemic
``(3) Statistical reporting numbers specified.--The
statistical reporting numbers specified in this paragraph are
the following:

[[Page S3566]]

``2207.10.6090.............. 3808.94.5090........ 6505.00.9089
2208.90.8000................ 3821.00.0010........ 7311.00.0090
2804.40.0000................ 3821.00.0090........ 7324.90.0000
2847.00.0000................ 3822.00.1090........ 7613.00.0000
3002.13.0010................ 3822.00.5050........ 8419.20.0010
3002.13.0090................ 3822.00.5095........ 8419.20.0020
3002.14.0010................ 3822.00.6000....... 8421.39.8040
3002.14.0090................ 3824.99.9297........ 8705.90.0010
3002.15.0010................ 3923.21.0095........ 8705.90.0020
3002.15.0090................ 3923.29.0000........ 8705.90.0080
3002.19.0000................ 3926.20.1010........ 8713.10.0000
3002.20.0020................ 3926.20.1020....... 8713.90.0030
3002.20.0040................ 3926.20.9010........ 8713.90.0060
3003.20.0060................ 3926.20.9050........ 9004.90.0010
3002.20.0080................ 3926.90.9910........ 9004.90.0090
3003.10.0000................ 3926.90.9950........ 9018.11.3000
3003.20.0000................ 3926.90.9985....... 9018.11.6000
3003.60.0000................ 4015.11.0110........ 9018.11.9000
3003.90.0120................ 4015.11.0150....... 9018.12.0000
3003.90.0140................ 4015.19.0510........ 9018.19.4000
3003.90.0160................ 4015.19.0550....... 9018.19.5500
3003.90.0180................ 4015.19.1010....... 9018.19.7500
3003.90.0190................ 4015.90.0010........ 9018.31.0040
3004.10.1020................ 4015.90.0050....... 9018.31.0080
3004.10.1045................ 4818.50.0020....... 9018.31.0090
3004.10.5045................ 4818.50.0080........ 9018.32.0000
3004.10.5060................ 4818.90.0020........ 9018.39.0020
3004.20.0020................ 4818.90.0080........ 9018.39.0040
3004.20.0030................ 6116.10.6500........ 9018.39.0050
3004.20.0060................ 6210.10.2000........ 9018.90.3000
3004.49.0060................ 6210.10.5010....... 9018.90.7580
3004.60.0000................ 6210.10.5090....... 9018.90.8000
3004.90.1000................ 6210.10.9010........ 9019.20.0000
3004.90.9207................ 6210.10.9040....... 9020.00.6000
3004.90.9209................ 6210.50.3500....... 9020.00.9000
3004.90.9211................ 6210.50.7500....... 9022.12.0000
3004.90.9214................ 6216.00.5420....... 9025.19.8010
3004.90.9285................ 6307.90.6090........ 9025.19.8020
3004.90.9290................ 6307.90.6800........ 9025.19.8060
3005.10.5000................ 6307.90.7200........ 9025.19.8085
3005.90.5090................ 6307.90.8910....... 9026.80.4000
3006.70.0000................ 6307.90.9845........ 9027.80.2500
3401.11.5000................ 6307.90.9850........ 9027.80.4530
3401.19.0000................ 6307.90.9870........ 9028.20.0000
3401.20.0000................ 6307.90.9875........ 9402.90.0010
3808.94.1000................ 6307.90.9891........ 9402.90.0020
3808.94.5010................ 6505.00.0100........
3808.94.5050................ 6505.00.8015........

``(4) Period specified.--The period specified in this
paragraph is the period--
``(A) beginning on the date that is 15 days after the date
of the enactment of this title; and
``(B) ending on January 15, 2023.''.
(b) Clerical Amendment.--The table of contents for the
Trade Act of 1974 is amended by adding at the end the
following:

``TITLE X--FACILITATING TRADE IN ESSENTIAL SUPPLIES

``Sec. 1001. Definitions.
``Sec. 1002. Committee on Trade in Essential Supplies in the United
States.
``Sec. 1003. Identification of and report on access to essential
supplies.
``Sec. 1004. Facilitating access to essential medical supplies.''.

SEC. 72002. SUPPLY CHAIN DATABASE AND TOOLKIT.

(a) Establishment.--
(1) In general.--Not later than 180 days after the date of
the enactment of this Act, the Secretary of Commerce shall
establish a database and online toolkit under which--
(A) United States businesses may voluntarily submit to the
Secretary information on--
(i) the products produced by such businesses in the United
States, which may be finished goods or inputs for other
goods;
(ii) the inputs required for such products, which may
include, with respect to such an input--

(I) the specific geographic location of the production of
the input, including if the input is sourced from the United
States or a foreign country;
(II) the business name of a supplier of the input;
(III) information related to perceived or realized
challenges in securing the input;
(IV) information related to the suspected vulnerabilities
or implications of a disruption in securing the input,
whether related to national security or the effect on the
United States business; or
(V) in the case of an input sourced from a foreign country,
information on--

(aa) why the input is sourced from a foreign country rather
than in the United States; and
(bb) if the United States business would be interested in
identifying an alternative produced in the United States;
(B) United States businesses may request and receive
contact information or general information about a United
States source or a foreign source for an input;
(C) United States businesses are able to specify--
(i) what information can be shared with other United States
businesses;
(ii) what information should be shared only with the
Department of Commerce; and
(iii) what information could be submitted to Congress or
made available to the public; and
(D) the Secretary makes information provided under this
paragraph available, subject to subparagraph (C), to enable
other United States businesses to identify inputs for their
products produced in the United States.
(2) Format; public availability.--The Secretary shall--
(A) provide the database and online toolkit established
under paragraph (1) on a publicly available website of the
Department of Commerce; and
(B) ensure that the database and online toolkit are--
(i) searchable and filterable according to the type of
information; and
(ii) presented in a user-friendly format.
(3) Exemption from public disclosure.--Information
submitted to the Secretary in relation to the database and
online toolkit established under paragraph (1)--
(A) may not be considered public records and shall be
exempt from any Federal law relating to public disclosure
requirements; and
(B) may not be subject to discovery or admission as public
information or evidence in

[[Page S3567]]

judicial or administrative proceedings without the consent of
the United States business that submitted the information.
(4) Reporting.--
(A) Report to congress.--Not later than 180 days after the
date of the enactment of this Act, and every 180 days
thereafter, the Secretary shall submit to Congress a report
that includes--
(i) an assessment of the effectiveness of the database and
online toolkit established under paragraph (1), including
statistics regarding the number of new entries, total
businesses involved, and any change in participation rate
during the preceding 180-day period;
(ii) recommendations for additional actions to improve the
database and online toolkit and participation in the database
and online toolkit; and
(iii) such other information as the Secretary considers
appropriate.
(B) Public report.--Not later than one year after the date
of the enactment of this Act, and annually thereafter, the
Secretary shall post on a publicly available website of the
Department of Commerce a report that sets forth--
(i) general statistics related to foreign and domestic
sourcing of inputs used by United States businesses;
(ii) an estimate of the percentage of total inputs used by
United States businesses obtained from foreign countries;
(iii) data on such inputs disaggregated by industry,
geographical location, and size of operation; and
(iv) a description of the methodology used to calculate the
statistics and estimates required by this paragraph.
(b) Public Outreach Campaign.--
(1) In general.--The Secretary shall carry out a national
public outreach campaign--
(A) to educate United States businesses about the existence
of the database and online toolkit established under
subsection (a); and
(B) to facilitate and encourage the participation of such
businesses in the database and online toolkit.
(2) Outreach requirement.--In carrying out the campaign
under paragraph (1), the Secretary shall--
(A) establish an advertising and outreach program directed
to businesses, industries, State and local agencies, chambers
of commerce, and labor organizations--
(i) to facilitate understanding of the value of an
aggregated demand mapping system; and
(ii) to advertise that the database and online toolkit
established under subsection (a) are available for that
purpose;
(B) notify appropriate State agencies not later than 10
days after the date of the enactment of this Act regarding
the development of the database and online toolkit; and
(C) post a notice on a publicly available website of the
Department of Commerce and establish a social media awareness
campaign to advertise the database and online toolkit.
(3) Coordination.--In carrying out the campaign under
paragraph (1), the Secretary may coordinate with other
Federal agencies and State or local agencies as appropriate.
(4) Separate accounting.--
(A) Budgetary line item.--The Secretary shall include in
the budget justification materials submitted to Congress in
support of the Department of Commerce budget for fiscal years
2023 and 2024 (as submitted with the budget of the President
under section 1105(a) of title 31, United States Code)
specific identification, as a budgetary line item, of the
amounts required to carry out the campaign under paragraph
(1).
(B) Prohibition on commingling.--Amounts appropriated to
carry out this subsection may not be commingled with any
other amounts appropriated to the Department of Commerce.
(c) Use of Department of Commerce Resources.--
(1) In general.--The Secretary --
(A) shall, to the maximum extent practicable, construct the
database and online toolkit required by subsection (a), and
related analytical features, using expertise within the
Department of Commerce; and
(B) may, as appropriate, adopt new technologies and hire
additional employees to carry out this section.
(2) Minimization of contracting.--If the activities
described in subparagraphs (A) and (B) of paragraph (1)
cannot be completed without the employment of contractors,
the Secretary should seek to minimize the number of
contractors and the scope of the contract.
(d) Termination.--This section shall terminate on September
30, 2025.

TITLE III--IMPROVING TRANSPARENCY AND ADMINISTRATION OF TRADE PROGRAMS
AND OVERSIGHT AND ACCOUNTABILITY OF TRADE AGENCIES

SEC. 73001. PROCESS FOR EXCLUSION OF ARTICLES FROM DUTIES
UNDER SECTION 301 OF THE TRADE ACT OF 1974.

(a) Establishment of General Exclusion Process.--
(1) In general.--Title III of the Trade Act of 1974 (19
U.S.C. 2411 et seq.) is amended by inserting after section
305 the following:

``SEC. 305A. PROCESS FOR EXCLUSION OF ARTICLES FROM DUTIES.

``(a) Analysis of Alternative Action.--Subject to
subsection (d), before taking action under section 301(b),
the Trade Representative shall analyze the impact of the
action on United States entities, particularly small
entities, and consumers in the United States with a goal of
mitigating the impact of duties on United States entities and
consumers in the United States, including by evaluating
alternatives or modifications to particular actions.
``(b) Process for Exclusion From Duties.--
``(1) In general.--Subject to subsection (d), the Trade
Representative shall establish and maintain a process for
exclusion requests from duties under section 301(b) unless
the Trade Representative determines and certifies to the
appropriate congressional committees that maintaining an
exclusion process--
``(A) would impair the ability of the United States to
maintain effective pressure to remove unreasonable or
discriminatory practices burdening commerce in the United
States; or
``(B) is impractical due to the low value of the duties
imposed.
``(2) Briefing.--If the Trade Representative makes a
certification under paragraph (1), not later than 3 days
before making the certification, the Trade Representative
shall brief the appropriate congressional committees
regarding the reasons for the certification.
``(3) Continued certification.--If the Trade Representative
makes a certification under paragraph (1) with respect to
duties under section 301(b), not less frequently than once
every 180 days while those duties are in effect, the Trade
Representative shall determine and certify to the appropriate
congressional committees that the reasons for forgoing an
exclusion process with respect to those duties continue to be
present.
``(c) Implementation of Exclusion Process.--
``(1) In general.--In implementing an exclusion process
required under subsection (b)(1), the Trade Representative
shall consider whether and which criteria described in
paragraph (2), and such other criteria as the Trade
Representative considers appropriate under the circumstances,
are appropriate to apply in the exclusion process.
``(2) Criteria described.--The criteria described in this
paragraph for exclusion of articles from duties under section
301(b) include the following:
``(A) Whether the failure to grant the exclusion would
result in severe economic harm to the requester.
``(B) Whether the article or a reasonable substitute is not
commercially available to the requester.
``(C) Whether the imposition of the duty with respect to
the article would unreasonably increase consumer prices for
day-to-day items consumed by low- or middle-income families
in the United States.
``(D) Whether the imposition of the duty would have an
unreasonable impact on manufacturing output of the United
States.
``(E) Whether the imposition of the duty would have an
unreasonable impact on the ability of an entity to fulfill
contracts or to build critical infrastructure.
``(F) Whether the failure to grant the exclusion is likely
to result in a particular entity or entities having the
ability to abuse a dominant market position.
``(d) Exclusion of Certain Duties.--This section shall not
apply to duties imposed under section 301(b) pursuant to a
dispute resolution process under the World Trade
Organization.
``(e) Publication of Notice.--Subject to subsection (d),
not later than 90 days after imposing any duty under section
301(b), the Trade Representative, in consultation with such
other Federal agencies as the Trade Representative considers
appropriate, shall publish a notice in the Federal Register
regarding the criteria that the Trade Representative will
apply and the evidence it will evaluate in determining
whether a request for exclusion from such duty satisfies the
requirements of the exclusion process under subsection
(b)(1).
``(f) Definitions.--In this section:
``(1) Appropriate congressional committees.--The term
`appropriate congressional committees' means--
``(A) the Committee on Finance of the Senate; and
``(B) the Committee on Ways and Means of the House of
Representatives.
``(2) Severe economic harm.--The term `severe economic
harm', with respect to an exclusion from duties requested by
a United States entity, includes circumstances under which
failure to grant the exclusion would--
``(A) render the business of the entity unprofitable; or
``(B) result in a significant number or proportion of the
workers employed by the entity becoming totally separated
from employment.
``(3) Small entities.--The term `small entities' has the
meaning given the term `small entity' in section 601 of title
5, United States Code.
``(4) United states entity.--The term `United States
entity' means an entity organized under the laws of the
United States or of any jurisdiction within the United
States, including a foreign branch of such an entity.''.
(2) Clerical amendment.--The table of contents for the
Trade Act of 1974 is amended by inserting after the item
relating to section 305 the following:

``Sec. 305A. Process for exclusion of articles from duties.''.
(b) Establishment of Exclusion Process for Certain Duties
Relating to People's Republic of China.--

[[Page S3568]]

(1) In general.--Notwithstanding any other provision of
law, the United States Trade Representative shall establish a
process pursuant to which United States entities and
associations of those entities may request the exclusion of
articles from duties described in paragraph (2).
(2) Duties described.--The duties described in this
paragraph are duties imposed pursuant to the investigation
initiated under section 301 of the Trade Act of 1974 (19
U.S.C. 2411) on August 18, 2017, and with respect to which
notice was published in the Federal Register on August 24,
2017 (82 Fed. Reg. 40213).
(3) Implementation of exclusion process.--In implementing
the process established under paragraph (1) for exclusion of
articles from duties described in paragraph (2), if the
exclusion of the article can likely be administered by U.S.
Customs and Border Protection--
(A) the Trade Representative shall exclude that article
from the imposition of such a duty if the Trade
Representative determines, following a request from a United
States entity or an association of those entities, that the
failure to grant the exclusion would result in severe
economic harm to the requester;
(B) unless the Trade Representative determines that
granting the exclusion would impair the ability of the United
States to maintain effective pressure to remove an
unreasonable or discriminatory practice burdening United
States commerce, the Trade Representative shall exclude that
article from the imposition of such a duty if the Trade
Representative determines following a request from a United
States entity or an association of those entities that--
(i) the article or a reasonable substitute is not
commercially available to the requester;
(ii) the imposition of the duty with respect to the article
would unreasonably increase consumer prices for day-to-day
items consumed by low- or middle-income families in the
United States;
(iii) the imposition of the duty would have an unreasonable
impact on manufacturing output of the United States;
(iv) the imposition of the duty would have an unreasonable
impact on the ability of an entity to fulfill contracts or to
build critical infrastructure; or
(v) the failure to grant the exclusion is likely to result
in a particular entity or entities having the ability to
abuse a dominant market position; and
(C) the Trade Representative may identify other criteria
relevant to determining whether the article shall be excluded
from the imposition of such a duty.
(4) Timeframe of exclusion and renewal.--
(A) Period of exclusion.--An exclusion of an article
requested under paragraph (1) from duties described in
paragraph (2)--
(i) shall be for a period of 18 months; and
(ii) shall be decided--

(I) not later than 90 days before the duty is due to be
paid; or
(II) if the Trade Representative determines that the
request presents exceptionally complex issues or requires
additional evidence, not later than 120 days before the duty
is due to be paid.

(B) Renewal.--The Trade Representative shall allow
applications for renewal of an exclusion under paragraph (1)
to be submitted not later than 90 days before the exclusion
is set to expire.
(C) Failure to act.--If the Trade Representative fails to
decide an exclusion request under subparagraph (A)(ii) during
the appropriate period set forth under that subparagraph, the
exclusion request will be deemed to have been granted until
the date that is 30 days after the Trade Representative
publishes in the Federal Register a decision not to grant the
request.
(5) Written reasoning.--
(A) In general.--If the Trade Representative denies a
request for an exclusion under paragraph (1), the Trade
Representative shall provide to the requester of the
exclusion a reasoned determination for denying the request.
(B) Substantial evidence.--A determination under
subparagraph (A) shall be supported by substantial evidence
from the administrative record.
(6) Review.--
(A) In general.--Not later than 180 days after the date of
the enactment of this Act, and annually thereafter, the
Comptroller General of the United States shall conduct an
audit of the exclusion process established under paragraph
(1).
(B) Elements of audit.--Each audit required by subparagraph
(A) shall--
(i) include a review of the process for--

(I) receiving and reviewing exclusion requests under
paragraph (1);
(II) determining eligibility for an exclusion;
(III) applying relevant criteria for an exclusion; and
(IV) making determinations regarding whether to grant an
exclusion;

(ii) examine the information provided to applicants prior
to seeking an exclusion, as well as throughout the exclusion
application process; and
(iii) analyze the timeliness of decisions, the consistency
of decisions, and the internal review process for making
decisions with respect to an exclusion.
(7) Regulations.--
(A) Implementation of process.--Not later than 120 days
after the date of the enactment of this Act, The Trade
Representative, in consultation with such other Federal
agencies as the Trade Representative considers appropriate,
shall prescribe regulations regarding the criteria that the
Trade Representative will apply and the evidence the Trade
Representative will evaluate in deciding whether any of the
conditions in paragraph (3) have been satisfied with respect
to an exclusion request under paragraph (1).
(B) Severe economic harm.--The Trade Representative shall
prescribe regulations regarding the definition of severe
economic harm under paragraph (8), including by setting forth
the evidence necessary to establish that a business is
unprofitable, that workers will be separated, and other
circumstances in which severe economic harm may be
demonstrated.
(8) Definitions.--In this subsection:
(A) Severe economic harm.--The term ``severe economic
harm'', with respect to an exclusion from duties requested by
a United States entity or an association of those entities,
includes circumstances under which failure to grant the
exclusion would--
(i) render the business of the entity or entities
unprofitable; or
(ii) result in a significant number or proportion of the
workers employed by the entity or entities becoming totally
separated from employment.
(B) United states entity.--The term ``United States
entity'' means an entity organized under the laws of the
United States or of any jurisdiction within the United
States, including a foreign branch of such an entity.
(c) Treatment of Certain Exclusions Relating to People's
Republic of China.--
(1) Reauthorization of exclusions.--All covered duty
exclusions shall be reinstituted for entries filed on or
before December 31, 2022.
(2) Retroactive application for certain liquidations and
reliquidations.--
(A) In general.--Notwithstanding section 514 of the Tariff
Act of 1930 (19 U.S.C. 1514) or any other provision of law
and subject to subparagraph (B), any entry of a covered
article on which duties were paid under section 301(b) of the
Trade Act of 1974 (19 U.S.C. 2411(b)) and to which a covered
duty exclusion would have applied if the entry were made on
December 31, 2020, that was made--
(i) after December 31, 2020, and
(ii) before the date of the enactment of this Act,
shall be liquidated or reliquidated as though such entry
occurred on such date of enactment.
(B) Requests.--A liquidation or reliquidation may be made
under subparagraph (A) with respect to an entry of an article
only if a request therefor is filed with U.S. Customs and
Border Protection not later than 180 days after the date of
the enactment of this Act that contains sufficient
information to enable U.S. Customs and Border Protection--
(i) to identify and reconstruct the entry, if necessary;
and
(ii) to verify that the article is a covered article.
(C) Payment of amounts owed.--Any amounts owed by the
United States pursuant to the liquidation or reliquidation of
an entry of a covered article under subparagraph (A) shall be
paid, without interest, not later than 90 days after the date
of the liquidation or reliquidation (as the case may be).
(3) Definitions.--In this subsection:
(A) Covered article.--The term ``covered article'' means an
article that qualifies for a covered duty exclusion from
duties paid under section 301(b) of the Trade Act of 1974 (19
U.S.C. 2411(b)) that was not granted by the United States
Trade Representative within 180 days of the date of
liquidation of an entry containing such an article.
(B) Covered duty exclusion.--The term ``covered duty
exclusion'' means a specific article exclusion that was--
(i) granted in the investigation initiated under section
301 of the Trade Act of 1974 (19 U.S.C. 2411) on August 18,
2017, and with respect to which notice was published in the
Federal Register on August 24, 2017 (82 Fed. Reg. 40213); and
(ii) published in the Federal Register.
(C) Entry.--The term ``entry'' includes a withdrawal from
warehouse for consumption.

SEC. 73002. ENHANCED CONGRESSIONAL OVERSIGHT OF THE UNITED
STATES TRADE REPRESENTATIVE AND THE DEPARTMENT
OF COMMERCE.

(a) United States Trade Representative.--
(1) People's republic of china.--The United States Trade
Representative shall submit to the appropriate congressional
committees--
(A) not later than September 1, 2021, and every 180 days
thereafter for the following 2 years, a confidential report
describing--
(i) the implementation of the Economic and Trade Agreement
Between the Government of the United States of America and
the Government of China, dated January 15, 2020, including an
identification of those provisions in the agreement that have
yet to be implemented; and
(ii) progress toward addressing the issues identified in
the report prepared by the Trade Representative dated March
22, 2018, and titled, ``Findings of the Investigation into
China's Acts, Policies, and Practices Related to Technology
Transfer, Intellectual Property, and Innovation under Section
301 of the Trade Act of 1974''; and

[[Page S3569]]

(B) the text of any initial proposal for an executive
agreement or memorandum of understanding with the People's
Republic of China intended to resolve an investigation with
respect to duties under section 301 of the Trade Act of 1974
(19 U.S.C. 2411) not later than 3 business days before
submitting the proposal to any official of the People's
Republic of China.
(2) Trade enforcement trust fund.--Section 611(e) of the
Trade Facilitation and Trade Enforcement Act of 2015 (19
U.S.C. 4405(e)) is amended--
(A) in the subsection heading, by striking ``Report'' and
inserting ``Reports'';
(B) by striking ``Not later than'' and inserting ``(1)
Report after entry into force.--Not later than''; and
(C) by adding at the end the following:
``(2) Report on use of funds.--Not later than July 1 of
each year, the Trade Representative shall submit to Congress
a report that identifies the use of any funds from the Trust
Fund during the one-year period preceding the date of the
report, including an identification of the specific
enforcement matter for which the funds were used.''.
(b) Department of Commerce.--
(1) Antidumping or countervailing duties.--
(A) In general.--Not later than July 1 of each year, the
Secretary of Commerce shall submit to the appropriate
congressional committees a report that identifies any
antidumping or countervailing duty determination under title
VII of the Tariff Act of 1930 (19 U.S. C. 1671 et seq.) that
in the year preceding the report was subject to a remand
pursuant to an order from the United States Court of
International Trade or a Chapter 10 Panel under the USMCA or
that was found to be inconsistent with the obligations of the
United States with the World Trade Organization.
(B) Elements.--With respect to each determination under
subparagraph (A), the Secretary of Commerce shall indicate--
(i) the specific statutory requirement that the Court of
International Trade or the Chapter 10 Panel found that the
Secretary failed to observe or the specific provision of the
WTO Agreement that a dispute settlement panel or Appellate
Body found to have been breached by the determination; and
(ii) whether or when the Secretary intends to comply with
the order or obligations described in subparagraph (A), as
the case may be.
(2) National security tariffs.--The Secretary of Commerce
shall include in each report submitted under paragraph (1),
if applicable, information regarding the operation of the
process for exclusion from tariffs under section 232 of the
Trade Expansion Act of 1962 (19 U.S.C. 1862) during the year
covered by the report, including--
(A) the approximate number of hours and employees of the
Department of Commerce (full-time equivalent) working on that
process;
(B) the number of requests for exclusion that have been
pending for more than 120 days; and
(C) a list of all exclusions that have been decided,
including by identifying whether the specific request for an
exclusion was granted or not, and the time it took to decide
the request.
(3) Notice of suspension of antidumping duty
investigation.--Section 734(b) of the Tariff Act of 1930 (19
U.S.C. 1673c(b)) is amended--
(A) by redesignating paragraphs (1) and (2) as
subparagraphs (A) and (B) and moving those two subparagraphs,
as so redesignated, two ems to the right;
(B) by striking ``The administering authority'' and
inserting ``(1) In general.--The administering authority'';
and
(C) by adding at the end the following:
``(2) Notification to congress.--The administering
authority shall submit to Congress the text of any proposal
to suspend an investigation under paragraph (1) not later
than 3 business days before submitting the proposal to an
interested party.''.
(c) Definitions.--In this section:
(1) Appellate body; dispute settlement panel.--the terms
``Appellate Body'' and ``dispute settlement panel'' have the
meanings given those terms in section 121 of the Uruguay
Round Agreements Act (19 U.S.C. 3531).
(2) USMCA.--The term ``USMCA'' means the Agreement between
the United States of America, the United Mexican States, and
Canada, which is--
(A) attached as an Annex to the Protocol Replacing the
North American Free Trade Agreement with the Agreement
between the United States of America, the United Mexican
States, and Canada, done at Buenos Aires on November 30,
2018, as amended by the Protocol of Amendment to the
Agreement Between the United States of America, the United
Mexican States, and Canada, done at Mexico City on December
10, 2019; and
(B) approved by Congress under section 101(a)(1) of the
United States-Mexico-Canada Agreement Implementation Act (19
U.S.C. 4511(a)).
(3) WTO agreement.--The term ``WTO Agreement'' has the
meaning given that term in section 2 of the Uruguay Round
Agreements Act (19 U.S.C. 3501(9)).

SEC. 73003. ESTABLISHMENT OF INSPECTOR GENERAL OF THE OFFICE
OF THE UNITED STATES TRADE REPRESENTATIVE.

(a) Definitions.--Section 12 of the Inspector General Act
of 1978 (5 U.S.C. App.) is amended--
(1) in paragraph (1), by striking ``or the Director of the
National Reconnaissance Office;'' and inserting ``the
Director of the National Reconnaissance Office; or the United
States Trade Representative;'' and
(2) in paragraph (2), by striking ``or the National
Reconnaissance Office,'' and inserting ``the National
Reconnaissance Office, or the Office of the United States
Trade Representative,''.
(b) Appointment of Inspector General.--Not later than 120
days after the date of the enactment of this Act, the
President shall appoint an individual to serve as the
Inspector General of the Office for the United States Trade
Representative in accordance with section 3(a) of the
Inspector General Act of 1978 (5 U.S.C. App.).

SEC. 73004. AUTHORITY OF U.S. CUSTOMS AND BORDER PROTECTION
TO CONSOLIDATE, MODIFY, OR REORGANIZE CUSTOMS
REVENUE FUNCTIONS.

(a) In General.--Section 412 of the Homeland Security Act
of 2002 (6 U.S.C. 212(b)) is amended--
(1) in subsection (b)--
(A) in paragraph (1)--
(i) by striking ``consolidate, discontinue,'' and inserting
``discontinue''; and
(ii) by inserting after ``reduce the staffing level'' the
following: ``below the optimal staffing level determined in
the most recent Resource Allocation Model required by section
301(h) of the Customs Procedural Reform and Simplification
Act of 1978 (19 U.S.C. 2075(h))''; and
(B) in paragraph (2), by inserting ``, National Account
Managers'' after ``Financial Systems Specialists''; and
(2) by adding at the end the following:
``(d) Authority to Consolidate, Modify, or Reorganize
Customs Revenue Functions.--
``(1) In general.--The Commissioner of U.S. Customs and
Border Protection may, subject to subsection (b),
consolidate, modify, or reorganize customs revenue functions
delegated to the Commissioner under subsection (a), including
by adding such functions to existing positions or
establishing new or modifying existing job series, grades,
titles, or classifications for personnel, and associated
support staff, performing such functions.
``(2) Position classification standards.--At the request of
the Commissioner, the Director of the Office of Personnel
Management shall establish new position classification
standards for any new positions established by the
Commissioner under paragraph (1).''.
(b) Technical Correction.--Section 412(a)(1) of the
Homeland Security Act of 2002 (6 U.S.C. 212(a)(1)) is amended
by striking ``403(a)(1)'' and inserting ``403(1)''.

SEC. 73005. PROTECTION FROM PUBLIC DISCLOSURE OF PERSONALLY
IDENTIFIABLE INFORMATION CONTAINED IN
MANIFESTS.

(a) In General.--Paragraph (2) of section 431(c) of the
Tariff Act of 1930 (19 U.S.C. 1431(c)) is amended to read as
follows:
``(2)(A) The information listed in paragraph (1) shall not
be available for public disclosure if--
``(i) the Secretary of the Treasury makes an affirmative
finding on a shipment-by-shipment basis that disclosure is
likely to pose a threat of personal injury or property
damage; or
``(ii) the information is exempt under the provisions of
section 552(b)(1) of title 5, United States Code.
``(B) The Secretary shall ensure that any personally
identifiable information, including Social Security account
numbers and passport numbers, is removed from any manifest
signed, produced, delivered, or electronically transmitted
under this section before access to the manifest is provided
to the public.''.
(b) Effective Date.--The amendment made by subsection (a)
shall take effect on the date that is 30 days after the date
of the enactment of this Act.

SEC. 73006. SENSE OF CONGRESS ON LEADERSHIP AT WORLD TRADE
ORGANIZATION.

(a) Findings.--Congress makes the following findings:
(1) The United States had led the formation, as well as
reform, of rules governing the multilateral trading system
since World War II.
(2) The United States is a founding member of the World
Trade Organization (in this section referred to as the
``WTO'') and a key architect of the organization.
(3) The United States secured important commitments in the
WTO to facilitate trade in goods and services, to prevent the
application of non-scientific restrictions on United States
agriculture, and to protect United States intellectual
property.
(4) The United States uses the rules of the WTO to benefit
workers, farmers, fishers, and businesses in the United
States by facilitating access to the 90 percent of the
world's consumers who live outside the borders of the United
States.
(5) The fundamental purpose of the WTO is to create space
for members to negotiate with each other, and the WTO
reserves to those members exclusively the right to negotiate
and adopt rules that reduce and eliminate trade barriers and
discriminatory treatment.
(6) The prompt settlement of disputes in which a member of
the WTO considers that its rights are being impaired by the
actions of another member is essential to the functioning of
the WTO and the maintenance of

[[Page S3570]]

a proper balance between the rights and obligations of
members.
(7) The WTO's dispute settlement function, including in
particular the Appellate Body, has increasingly failed to
enforce the rules of the WTO in a timely manner, and has
usurped the negotiating prerogative of members by creating
new obligations and rights that are inconsistent with or not
included in the rules negotiated by members.
(8) The creation of those obligations and rights
undermines--
(A) the WTO's negotiating function by discouraging members
from making concessions; and
(B) the WTO's dispute settlement function by encouraging
overuse of the process and undermining its legitimacy,
including by preventing free market economies from responding
to globally trade distortive practices by nonmarket
economies.
(9) The WTO does not have sufficient rules to discipline
the distortive economic policies of nonmarket economies, such
as policies relating to excess capacity and forced technology
transfer, the special treatment those economies afford to
state-owned enterprises, and their massive and opaque
industrial subsidies.
(10) There is long-standing bipartisan support in Congress
to reform the WTO to address those failings.
(11) The current presidential administration, as well as
prior administrations, raised concerns about the failings
described in this subsection and have made reform of the WTO
a top priority of United States trade policy.
(12) The United States urges WTO members to work
constructively with the United States to assess the reasons
why the existing WTO rules have proven inadequate in order to
create an atmosphere within the WTO that is conducive to the
development of new rules less subject to jurisprudential
drift.
(13) The guiding principle for reform of the WTO, and the
lens through which WTO members should consider specific
reform proposals, is the restoration of the WTO's capability
and capacity for negotiation among members.
(14) The United States has achieved its trade policy
objectives through active leadership at the WTO, and an
absence of that leadership would be filled by nonmarket
economies that are hostile to a host of United States
interests.
(b) Sense of Congress.--It is the sense of Congress that--
(1) while the United States finds value and usefulness in
the WTO, in order to fulfill the needs of the United States
and other free and open economies in the 21st century,
significant reforms are needed;
(2) the United States must therefore continue to
demonstrate leadership to achieve reforms that restore the
effectiveness of the WTO's--
(A) negotiating function;
(B) dispute settlement function so that it transparently,
efficiently, and fully enforces outcomes negotiated by
members rather than usurping their primacy by creating new
rights or obligations; and
(C) rules for special and differential treatment to ensure
those rules promote advancement for truly developing
countries, rather than becoming tools for globally
competitive countries, like the People's Republic of China,
to engage in protectionism and market distortions;
(3) the efforts to reform the negotiating function of the
WTO should revitalize the negotiating function by providing
confidence to members that the WTO operates according to the
rules as negotiated and adopted by members;
(4) a revitalized negotiating function must include new
rules that reflect the 21st century economy, further combat
anticompetitive and protectionist barriers, and ensure
disputes are efficiently resolved;
(5) the United States Trade Representative should continue
to lead efforts to work with WTO members to pursue reforms at
the WTO that--
(A) ensure the dispute settlement mechanism faithfully
applies the rules adopted by members, including by
undertaking measures to ensure the WTO's Appellate Body does
not create new rights and obligations;
(B) improve public confidence in dispute settlement by
promoting greater transparency and efficiency in the conduct
of proceedings;
(C) redress the consistent failure by certain members to
satisfy their notification obligations under various WTO
agreements, including through measures that strengthen
accountability;
(D) ensure rules for special and differential treatment are
appropriately reserved for countries whose state of
development and global competitiveness actually warrants such
flexibility;
(E) create new rules and structures that can serve the
interests of the United States while promoting peace,
prosperity, good governance, transparency, effective
operation of legal regimes, the rule of law, and free
enterprise; and
(F) expand upon the trilateral negotiations currently
underway with Japan and the European Union; and
(6) the United States Trade Representative should explore
and assess specific reform proposals, including--
(A) pursuing plurilateral agreements that further the
interests of the United States while limiting the benefits
accruing to countries that are not parties to those
agreements;
(B) efforts to ensure that incorrect interpretations by the
Appellate Body, including with respect to the Agreement on
Safeguards, the Agreement on Implementation of Article VI of
the General Agreement on Tariffs and Trade 1994, and the
Agreement on Subsidies and Countervailing Measures, are
corrected, and not to be deemed precedential;
(C) new rules and norms to address practices of nonmarket
economies, such as practices relating to state-owned
enterprises, which certain countries often utilize for
objectives that cause severe trade distortions; and
(D) better implementation of existing rules, such as the
prohibition in paragraph 4 of Article XIV of the General
Agreement on Tariffs and Trade on currency manipulation, to
ensure that those rules are effective to preserve the rights
of free market economies.

TITLE IV--PROMOTING AMERICAN COMPETITIVENESS

Subtitle A--Reauthorization and Reform of Generalized System of
Preferences

SEC. 74001. MODIFICATION OF ELIGIBILITY CRITERIA FOR
BENEFICIARY DEVELOPING COUNTRIES.

(a) In General.--Section 502 of the Trade Act of 1974 (19
U.S.C. 2462) is amended--
(1) in subsection (b)(2)--
(A) by inserting after subparagraph (H) the following:
``(I) Such country has failed, in a manner affecting trade
or investment--
``(i) to effectively enforce its environmental laws or
regulations through a sustained or recurring course of action
or inaction; or
``(ii) to adopt and maintain measures implementing its
obligations under common multilateral environmental
agreements.
``(J) Such country engages in gross violations of
internationally recognized human rights in that country
(including any designated zone in that country).''; and
(B) in the text following subparagraph (J) (as inserted by
subparagraph (A)), by striking ``and (H) (to the extent
described in section 507(6)(D))'' and inserting ``(H) (to the
extent described in section 507(6)(D)), (I), and (J)''; and
(2) in subsection (c)--
(A) in paragraph (6)(B), by striking ``; and'' and
inserting a semicolon;
(B) in paragraph (7)--
(i) by striking ``whether'' and all that follows through
``afford'' and inserting ``the extent to which such country
is affording''; and
(ii) by striking the period at the end and inserting a
semicolon; and
(C) by adding at the end the following:
``(8) the extent to which such country is effectively
enforcing its environmental laws and regulations and adopting
and maintaining measures implementing its obligations under
common multilateral environmental agreements;
``(9) the extent to which such country is achieving the
goals described in section 3(b) of the Women's
Entrepreneurship and Economic Empowerment Act of 2018 (22
U.S.C. 2151-2(b));
``(10) the extent to which such country has established, or
is making continual progress toward establishing--
``(A) the rule of law, political pluralism, and the right
to due process, a fair trial, and equal protection under the
law;
``(B) economic policies to reduce poverty, increase the
availability of health care and educational opportunities,
expand physical infrastructure, promote the development of
private enterprise, and encourage the formation of capital
markets through micro-credit or other programs; and
``(C) a system to combat corruption and bribery, such as
signing and implementing the Convention on Combating Bribery
of Foreign Public Officials in International Business
Transactions, done at Paris December 17, 1997, and entered
into force February 15, 1999 (TIAS 99-215); and
``(11) the extent to which such country--
``(A) has refrained from imposing, or has eliminated,
digital trade barriers, including unnecessary or
discriminatory data localization or data transfer
restrictions; and
``(B) has taken steps in the digital environment to support
consumer protections, the privacy of personal information,
and open digital ecosystems.''.
(b) Modification of Withdrawal, Suspension, or Limitation
Requirements.--Section 502 of the Trade Act of 1974 (19
U.S.C. 2462) is amended--
(1) in subsection (d)(1), in the second sentence--
(A) by striking ``shall consider'' and inserting the
following: ``shall--
``(A) consider'';
(B) by striking the period at the end and inserting ``;
and''; and
(C) by adding at the end the following:
``(B) hold a public hearing or provide for a period of not
less than 30 days for submission of comments by the
public.''; and
(2) in subsection (f)(2)--
(A) in the paragraph heading, by inserting ``or
suspension'' after ``termination'';
(B) by inserting ``or suspend'' after ``terminate'' each
place it appears; and
(C) by inserting ``or suspension'' after ``termination''.
(c) Publication of Determinations Relating to Petitions for
Review.--Section 502 of the Trade Act of 1974 (19 U.S.C.
2462) is amended by adding at the end the following:
``(g) Publication of Determinations Relating to Petitions
for Review.--The United States Trade Representative shall
publish in the Federal Register a notice of,

[[Page S3571]]

and the rationale for, any determination of the Trade
Representative with respect to a petition for review of the
eligibility of a country for designation as a beneficiary
developing country, including a determination--
``(1) to accept or deny such a petition;
``(2) to continue to review the eligibility of the country;
or
``(3) to withdraw, suspend, or limit the application of
duty-free treatment under this title with respect to the
country.''.
(d) Definitions.--Section 507 of the Trade Act of 1974 (19
U.S.C. 2467) is amended--
(1) in paragraph (4)--
(A) in subparagraph (D), by striking ``; and'' and
inserting a semicolon;
(B) in subparagraph (E), by striking the period at the end
and inserting ``; and''; and
(C) by adding at the end the following:
``(F) the elimination of all forms of discrimination with
respect to occupation and employment.''; and
(2) by adding at the end the following:
``(7) Common multilateral environmental agreement.--
``(A) In general.--The term `common multilateral
environmental agreement', for purposes of determining the
eligibility of a country for designation as a beneficiary
developing country under this title, means any agreement
specified in subparagraph (B) to which both the United States
and that country are full parties, including any current or
future mutually agreed upon protocols, amendments, annexes,
or adjustments to such an agreement.
``(B) Agreements specified.--The agreements specified in
this subparagraph are the following:
``(i) The Convention on International Trade in Endangered
Species of Wild Fauna and Flora, done at Washington March 3,
1973 (27 UST 1087; TIAS 8249).
``(ii) The Montreal Protocol on Substances that Deplete the
Ozone Layer, done at Montreal September 16, 1987.
``(iii) The Protocol of 1978 Relating to the International
Convention for the Prevention of Pollution from Ships, 1973,
done at London February 17, 1978.
``(iv) The Convention on Wetlands of International
Importance, Especially as Waterfowl Habitat, done at Ramsar
February 2, 1971 (TIAS 11084).
``(v) The Convention on the Conservation of Antarctic
Marine Living Resources, done at Canberra May 20, 1980 (33
UST 3476).
``(vi) The International Convention for the Regulation of
Whaling, done at Washington December 2, 1946 (62 Stat. 1716).
``(vii) The Convention for the Establishment of an Inter-
American Tropical Tuna Commission, done at Washington May 31,
1949 (1 UST 230).''.

SEC. 74002. SUPPLEMENTAL REVIEWS AND REPORTING.

(a) Assessment and Report on Compliance With Eligibility
Requirements.--Section 502 of the Trade Act of 1974, as
amended by section 74001, is further amended by adding at the
end the following:
``(h) Assessment and Report on Compliance With Eligibility
Requirements.--
``(1) In general.--The President shall--
``(A) on an annual basis--
``(i) conduct assessments of the compliance of an
appropriate number of countries designated as beneficiary
developing countries for purposes of this title in meeting or
continuing to meet the eligibility requirements under this
title; and
``(ii) make determinations with respect to whether to
initiate full reviews of the practices of those countries to
assess the continued eligibility of those countries for
designation as beneficiary developing countries under this
title; and
``(B) submit to Congress a report consisting of the results
of such assessments and determinations.
``(2) Frequency.--The President shall conduct an assessment
described in clause (i) of paragraph (1)(A) and make a
determination described in clause (ii) of that paragraph with
respect to each country designated as a beneficiary
developing country for purposes of this title not less
frequently than once every 3 years.''.
(b) Assessment of Effectiveness of Generalized System of
Preferences in Strengthening and Maintaining Internationally
Recognized Worker Rights and Women's Entrepreneurship and
Economic Empowerment.--
(1) Policy of the united states.--It is the policy of the
United States to support gender equality and worker rights by
promoting legal reforms that address legal, structural, and
social barriers that constrain the full and free economic
participation of all workers in the global economy.
(2) Amendment to trade act of 1974.--
(A) In general.--Title V of the Trade Act of 1974 (19
U.S.C. 2461 et seq.) is amended by inserting after section
504 the following:

``SEC. 504A. ASSESSMENT OF EFFECTIVENESS IN STRENGTHENING AND
MAINTAINING INTERNATIONALLY RECOGNIZED WORKER
RIGHTS AND WOMEN'S ENTREPRENEURSHIP AND
ECONOMIC EMPOWERMENT.

``(a) In General.--Not later than 15 months after the date
of the enactment of this section, and every 2 years
thereafter, the United States Trade Representative and the
Deputy Undersecretary of Labor for International Affairs, in
consultation with the policy advisory committee on labor
established under section 135(c)(1), shall jointly submit to
Congress an assessment of the effectiveness of the
administration of this title in maintaining or strengthening
the efforts of beneficiary developing countries relating to
the factors described in paragraphs (7) and (9) of section
502(c).
``(b) Methodology and Sources.--The assessment required by
subsection (a) shall include--
``(1) an explanation of the methodology and sources used to
prepare the assessment; and
``(2) where relevant, citations to data, information,
studies, and assessments that were used to prepare the
assessment and were gathered, compiled, or developed by the
United States Government, foreign governments, multilateral
institutions, nongovernmental organizations, or educational
institutions.
``(c) Measurement of Women's Economic Empowerment.--To
support the measurement of women's economic empowerment, the
Trade Representative shall encourage and support the
reporting by beneficiary developing countries of sex-
disaggregated economic and business data, including the
gathering of information consistent with the United Nations
Sustainable Development Goals, particularly the goals
relating to gender equality and decent work.''.
(B) Clerical amendment.--The table of contents for the
Trade Act of 1974 is amended by inserting after the item
relating to section 504 the following:

``Sec. 504A. Assessment of effectiveness in strengthening and
maintaining internationally recognized worker rights and
women's entrepreneurship and economic empowerment.''.
(c) United States International Trade Commission Study.--
Not later than July 1, 2023, the United States International
Trade Commission shall submit to Congress a report that
contains a study on rules of origin, utilization rates, and
eligibility requirements for articles under the Generalized
System of Preferences program under title V of the Trade Act
of 1974 (19 U.S.C. 2461 et seq.), including an assessment
of--
(1) the rate of utilization of the program by countries
designated as least-developed beneficiary developing
countries under section 502(a)(2) of that Act (19 U.S.C.
2462(a)(2));
(2) the effectiveness of the rules of origin of the program
in--
(A) promoting trade benefits to least-developed beneficiary
developing countries under the program; and
(B) preventing the transshipment of articles from countries
that are not designated as beneficiary developing countries
under section 502(a)(1) of that Act (19 U.S.C. 2462(a)(1));
and
(3) the requirements and procedures for designating
articles as eligible articles under section 503 of that Act
(19 U.S.C. 2463), including--
(A) the competitive need limitation under subsection (c)(2)
of that section; and
(B) the process for waiving that limitation under
subsection (d) of that section.

SEC. 74003. EXTENSION OF GENERALIZED SYSTEM OF PREFERENCES.

(a) In General.--Section 505 of the Trade Act of 1974 (19
U.S.C. 2465) is amended by striking ``December 31, 2020'' and
inserting ``January 1, 2027''.
(b) Effective Date.--
(1) In general.--The amendment made by subsection (a) shall
apply to articles entered on or after the 30th day after the
date of the enactment of this Act.
(2) Retroactive application for certain liquidations and
reliquidations.--
(A) In general.--Notwithstanding section 514 of the Tariff
Act of 1930 (19 U.S.C. 1514) or any other provision of law
and subject to subparagraph (B), any entry of a covered
article to which duty-free treatment or other preferential
treatment under title V of the Trade Act of 1974 (19 U.S.C.
2461 et seq.) would have applied if the entry had been made
on December 31, 2020, that was made--
(i) after December 31, 2020, and
(ii) before the effective date specified in paragraph (1),
shall be liquidated or reliquidated as though such entry
occurred on the effective date specified in paragraph (1).
(B) Requests.--A liquidation or reliquidation may be made
under subparagraph (A) with respect to an entry only if a
request therefor is filed with U.S. Customs and Border
Protection not later than 180 days after the date of the
enactment of this Act that contains sufficient information to
enable U.S. Customs and Border Protection--
(i) to locate the entry; or
(ii) to reconstruct the entry if it cannot be located.
(C) Payment of amounts owed.--Any amounts owed by the
United States pursuant to the liquidation or reliquidation of
an entry of a covered article under subparagraph (A) shall be
paid, without interest, not later than 90 days after the date
of the liquidation or reliquidation (as the case may be).
(3) Definitions.--In this subsection:
(A) Covered article.--The term ``covered article'' means an
article from a country that is a beneficiary developing
country under title V of the Trade Act of 1974 (19 U.S.C.
2461 et seq.) as of the effective date specified in paragraph
(1).
(B) Enter; entry.--The terms ``enter'' and ``entry''
include a withdrawal from warehouse for consumption.

Subtitle B--Temporary Duty Suspensions and Reductions

SEC. 74011. REFERENCE.

Except as otherwise expressly provided, whenever in this
subtitle an amendment or

[[Page S3572]]

repeal is expressed in terms of an amendment to, or repeal
of, a chapter, subchapter, note, additional U.S. note,
heading, subheading, or other provision, the reference shall
be considered to be made to a chapter, subchapter, note,
additional U.S. note, heading, subheading, or other provision
of the Harmonized Tariff Schedule of the United States.

PART I--NEW DUTY SUSPENSIONS AND REDUCTIONS

SEC. 74021. SHELLED PINE NUTS.