[Title 49 CFR ]
[Code of Federal Regulations (annual edition) - October 1, 2018 Edition]
[From the U.S. Government Publishing Office]
[[Page i]]
Title 49
Transportation
________________________
Parts 100 to 177
Revised as of October 1, 2018
Containing a codification of documents of general
applicability and future effect
As of October 1, 2018
Published by the Office of the Federal Register
National Archives and Records Administration as a
Special Edition of the Federal Register
[[Page ii]]
U.S. GOVERNMENT OFFICIAL EDITION NOTICE
Legal Status and Use of Seals and Logos
The seal of the National Archives and Records Administration
(NARA) authenticates the Code of Federal Regulations (CFR) as
the official codification of Federal regulations established
under the Federal Register Act. Under the provisions of 44
U.S.C. 1507, the contents of the CFR, a special edition of the
Federal Register, shall be judicially noticed. The CFR is
prima facie evidence of the original documents published in
the Federal Register (44 U.S.C. 1510).
It is prohibited to use NARA's official seal and the stylized Code
of Federal Regulations logo on any republication of this
material without the express, written permission of the
Archivist of the United States or the Archivist's designee.
Any person using NARA's official seals and logos in a manner
inconsistent with the provisions of 36 CFR part 1200 is
subject to the penalties specified in 18 U.S.C. 506, 701, and
1017.
Use of ISBN Prefix
This is the Official U.S. Government edition of this publication
and is herein identified to certify its authenticity. Use of
the 0-16 ISBN prefix is for U.S. Government Publishing Office
Official Editions only. The Superintendent of Documents of the
U.S. Government Publishing Office requests that any reprinted
edition clearly be labeled as a copy of the authentic work
with a new ISBN.
U . S . G O V E R N M E N T P U B L I S H I N G O F F I C E
------------------------------------------------------------------
U.S. Superintendent of Documents Washington, DC
20402-0001
http://bookstore.gpo.gov
Phone: toll-free (866) 512-1800; DC area (202) 512-1800
[[Page iii]]
Table of Contents
Page
Explanation................................................. v
Title 49:
SUBTITLE B--Other Regulations Relating to Transportation
Chapter I--Pipeline and Hazardous Materials Safety
Administration, Department of Transportation 5
Finding Aids:
Table of CFR Titles and Chapters........................ 939
Alphabetical List of Agencies Appearing in the CFR...... 959
List of CFR Sections Affected........................... 969
[[Page iv]]
----------------------------
Cite this Code: CFR
To cite the regulations in
this volume use title,
part and section number.
Thus, 49 CFR 105.5 refers
to title 49, part 105,
section 5.
----------------------------
[[Page v]]
EXPLANATION
The Code of Federal Regulations is a codification of the general and
permanent rules published in the Federal Register by the Executive
departments and agencies of the Federal Government. The Code is divided
into 50 titles which represent broad areas subject to Federal
regulation. Each title is divided into chapters which usually bear the
name of the issuing agency. Each chapter is further subdivided into
parts covering specific regulatory areas.
Each volume of the Code is revised at least once each calendar year
and issued on a quarterly basis approximately as follows:
Title 1 through Title 16.................................as of January 1
Title 17 through Title 27..................................as of April 1
Title 28 through Title 41...................................as of July 1
Title 42 through Title 50................................as of October 1
The appropriate revision date is printed on the cover of each
volume.
LEGAL STATUS
The contents of the Federal Register are required to be judicially
noticed (44 U.S.C. 1507). The Code of Federal Regulations is prima facie
evidence of the text of the original documents (44 U.S.C. 1510).
HOW TO USE THE CODE OF FEDERAL REGULATIONS
The Code of Federal Regulations is kept up to date by the individual
issues of the Federal Register. These two publications must be used
together to determine the latest version of any given rule.
To determine whether a Code volume has been amended since its
revision date (in this case, October 1, 2018), consult the ``List of CFR
Sections Affected (LSA),'' which is issued monthly, and the ``Cumulative
List of Parts Affected,'' which appears in the Reader Aids section of
the daily Federal Register. These two lists will identify the Federal
Register page number of the latest amendment of any given rule.
EFFECTIVE AND EXPIRATION DATES
Each volume of the Code contains amendments published in the Federal
Register since the last revision of that volume of the Code. Source
citations for the regulations are referred to by volume number and page
number of the Federal Register and date of publication. Publication
dates and effective dates are usually not the same and care must be
exercised by the user in determining the actual effective date. In
instances where the effective date is beyond the cut-off date for the
Code a note has been inserted to reflect the future effective date. In
those instances where a regulation published in the Federal Register
states a date certain for expiration, an appropriate note will be
inserted following the text.
OMB CONTROL NUMBERS
The Paperwork Reduction Act of 1980 (Pub. L. 96-511) requires
Federal agencies to display an OMB control number with their information
collection request.
[[Page vi]]
Many agencies have begun publishing numerous OMB control numbers as
amendments to existing regulations in the CFR. These OMB numbers are
placed as close as possible to the applicable recordkeeping or reporting
requirements.
PAST PROVISIONS OF THE CODE
Provisions of the Code that are no longer in force and effect as of
the revision date stated on the cover of each volume are not carried.
Code users may find the text of provisions in effect on any given date
in the past by using the appropriate List of CFR Sections Affected
(LSA). For the convenience of the reader, a ``List of CFR Sections
Affected'' is published at the end of each CFR volume. For changes to
the Code prior to the LSA listings at the end of the volume, consult
previous annual editions of the LSA. For changes to the Code prior to
2001, consult the List of CFR Sections Affected compilations, published
for 1949-1963, 1964-1972, 1973-1985, and 1986-2000.
``[RESERVED]'' TERMINOLOGY
The term ``[Reserved]'' is used as a place holder within the Code of
Federal Regulations. An agency may add regulatory information at a
``[Reserved]'' location at any time. Occasionally ``[Reserved]'' is used
editorially to indicate that a portion of the CFR was left vacant and
not accidentally dropped due to a printing or computer error.
INCORPORATION BY REFERENCE
What is incorporation by reference? Incorporation by reference was
established by statute and allows Federal agencies to meet the
requirement to publish regulations in the Federal Register by referring
to materials already published elsewhere. For an incorporation to be
valid, the Director of the Federal Register must approve it. The legal
effect of incorporation by reference is that the material is treated as
if it were published in full in the Federal Register (5 U.S.C. 552(a)).
This material, like any other properly issued regulation, has the force
of law.
What is a proper incorporation by reference? The Director of the
Federal Register will approve an incorporation by reference only when
the requirements of 1 CFR part 51 are met. Some of the elements on which
approval is based are:
(a) The incorporation will substantially reduce the volume of
material published in the Federal Register.
(b) The matter incorporated is in fact available to the extent
necessary to afford fairness and uniformity in the administrative
process.
(c) The incorporating document is drafted and submitted for
publication in accordance with 1 CFR part 51.
What if the material incorporated by reference cannot be found? If
you have any problem locating or obtaining a copy of material listed as
an approved incorporation by reference, please contact the agency that
issued the regulation containing that incorporation. If, after
contacting the agency, you find the material is not available, please
notify the Director of the Federal Register, National Archives and
Records Administration, 8601 Adelphi Road, College Park, MD 20740-6001,
or call 202-741-6010.
CFR INDEXES AND TABULAR GUIDES
A subject index to the Code of Federal Regulations is contained in a
separate volume, revised annually as of January 1, entitled CFR Index
and Finding Aids. This volume contains the Parallel Table of Authorities
and Rules. A list of CFR titles, chapters, subchapters, and parts and an
alphabetical list of agencies publishing in the CFR are also included in
this volume.
[[Page vii]]
An index to the text of ``Title 3--The President'' is carried within
that volume.
The Federal Register Index is issued monthly in cumulative form.
This index is based on a consolidation of the ``Contents'' entries in
the daily Federal Register.
A List of CFR Sections Affected (LSA) is published monthly, keyed to
the revision dates of the 50 CFR titles.
REPUBLICATION OF MATERIAL
There are no restrictions on the republication of material appearing
in the Code of Federal Regulations.
INQUIRIES
For a legal interpretation or explanation of any regulation in this
volume, contact the issuing agency. The issuing agency's name appears at
the top of odd-numbered pages.
For inquiries concerning CFR reference assistance, call 202-741-6000
or write to the Director, Office of the Federal Register, National
Archives and Records Administration, 8601 Adelphi Road, College Park, MD
20740-6001 or e-mail [email protected].
SALES
The Government Publishing Office (GPO) processes all sales and
distribution of the CFR. For payment by credit card, call toll-free,
866-512-1800, or DC area, 202-512-1800, M-F 8 a.m. to 4 p.m. e.s.t. or
fax your order to 202-512-2104, 24 hours a day. For payment by check,
write to: US Government Publishing Office - New Orders, P.O. Box 979050,
St. Louis, MO 63197-9000.
ELECTRONIC SERVICES
The full text of the Code of Federal Regulations, the LSA (List of
CFR Sections Affected), The United States Government Manual, the Federal
Register, Public Laws, Public Papers of the Presidents of the United
States, Compilation of Presidential Documents and the Privacy Act
Compilation are available in electronic format via www.govinfo.gov. For
more information, contact the GPO Customer Contact Center, U.S.
Government Publishing Office. Phone 202-512-1800, or 866-512-1800 (toll-
free). E-mail, [email protected].
The Office of the Federal Register also offers a free service on the
National Archives and Records Administration's (NARA) World Wide Web
site for public law numbers, Federal Register finding aids, and related
information. Connect to NARA's web site at www.archives.gov/federal-
register.
The e-CFR is a regularly updated, unofficial editorial compilation
of CFR material and Federal Register amendments, produced by the Office
of the Federal Register and the Government Publishing Office. It is
available at www.ecfr.gov.
Oliver A. Potts,
Director,
Office of the Federal Register
October 1, 2018
[[Page ix]]
THIS TITLE
Title 49--Transportation is composed of nine volumes. The parts in
these volumes are arranged in the following order: Parts 1-99, parts
100-177, parts 178-199, parts 200-299, parts 300-399, parts 400-571,
parts 572-999, parts 1000-1199, and part 1200 to end. The first volume
(parts 1-99) contains current regulations issued under subtitle A--
Office of the Secretary of Transportation; the second volume (parts 100-
177) and the third volume (parts 178-199) contain the current
regulations issued under chapter I--Pipeline and Hazardous Materials
Safety Administration (DOT); the fourth volume (parts 200-299) contains
the current regulations issued under chapter II--Federal Railroad
Administration (DOT); the fifth volume (parts 300-399) contains the
current regulations issued under chapter III--Federal Motor Carrier
Safety Administration (DOT); the sixth volume (parts 400-571) contains
the current regulations issued under chapter IV--Coast Guard (DHS), and
some of chapter V--National Highway Traffic Safety Administration (DOT);
the seventh volume (parts 572-999) contains the rest of the regulations
issued under chapter V--National Highway Traffic Safety Administration
(DOT), and the current regulations issued under chapter VI--Federal
Transit Administration (DOT), chapter VII--National Railroad Passenger
Corporation (AMTRAK), and chapter VIII--National Transportation Safety
Board; the eighth volume (parts 1000-1199) contains some of the current
regulations issued under chapter X--Surface Transportation Board and the
ninth volume (part 1200 to end) contains the rest of the current
regulations issued under chapter X--Surface Transportation Board,
chapter XI--Research and Innovative Technology Administration (DOT), and
chapter XII--Transportation Security Administration (DHS). The contents
of these volumes represent all current regulations codified under this
title of the CFR as of October 1, 2018.
In the volume containing parts 100-177, see Sec. 172.101 for the
Hazardous Materials Table. The Federal Motor Vehicle Safety Standards
appear in part 571.
For this volume, Ann Worley was Chief Editor. The Code of Federal
Regulations publication program is under the direction of John Hyrum
Martinez, assisted by Stephen J. Frattini.
[[Page 1]]
TITLE 49--TRANSPORTATION
(This book contains parts 100 to 177)
--------------------------------------------------------------------
SUBTITLE B--Other Regulations Relating To Transportation
Part
chapter i--Pipeline and Hazardous Materials Safety
Administration, Department of Transportation.............. 105
[[Page 3]]
Subtitle B--Other Regulations Relating to Transportation
[[Page 5]]
CHAPTER I--PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION,
DEPARTMENT OF TRANSPORTATION
--------------------------------------------------------------------
SUBCHAPTER A--HAZARDOUS MATERIALS AND OIL TRANSPORTATION
Part Page
100-104
[Reserved]
105 Hazardous Materials Program definitions and
general procedures...................... 7
106 Rulemaking procedures....................... 13
107 Hazardous materials program procedures...... 19
109 Department of Transportation hazardous
material procedural regulations......... 78
110 Hazardous materials public sector training
and planning grants..................... 86
SUBCHAPTER B--OIL TRANSPORTATION
130 Oil spill prevention and response plans..... 95
SUBCHAPTER C--HAZARDOUS MATERIALS REGULATIONS
171 General information, regulations, and
definitions............................. 98
172 Hazardous materials table, special
provisions, hazardous materials
communications, emergency response
information, training requirements, and
security plans.......................... 147
173 Shippers--general requirements for shipments
and packagings.......................... 457
174 Carriage by rail............................ 799
175 Carriage by aircraft........................ 826
176 Carriage by vessel.......................... 848
177 Carriage by public highway.................. 912
[[Page 7]]
SUBCHAPTER A_HAZARDOUS MATERIALS AND OIL TRANSPORTATION
PARTS 100 104 [RESERVED]
PART 105_HAZARDOUS MATERIALS PROGRAM DEFINITIONS AND GENERAL PROCEDURES--
Table of Contents
Subpart A_Definitions
Sec.
105.5 Definitions.
Subpart B_General Procedures
105.15 Defined terms used in this subpart.
Obtaining Guidance and Public Information
105.20 Guidance and interpretations.
105.25 Reviewing public documents.
105.26 Obtaining records on file with PHMSA.
105.30 Information made available to the public and request for
confidential treatment.
Serving Documents
105.35 Serving documents in PHMSA proceedings.
105.40 Designated agents for non-residents.
Subpoenas
105.45 Issuing a subpoena.
105.50 Serving a subpoena.
105.55 Refusal to obey a subpoena.
Authority: 49 U.S.C. 5101-5128; 49 CFR 1.81 and 1.97.
Source: 67 FR 42951, June 25, 2002, unless otherwise noted.
Editorial Note: Nomenclature changes to part 105 appear at 70 FR
56087, Sept. 23, 2005.
Subpart A_Definitions
Sec. 105.5 Definitions.
(a) This part contains the definitions for certain words and phrases
used throughout this subchapter (49 CFR parts 105 through 110). At the
beginning of each subpart, the Pipeline and Hazardous Materials Safety
Administration (``PHMSA'' or ``we'') will identify the defined terms
that are used within the subpart--by listing them--and refer the reader
to the definitions in this part. This way, readers will know that PHMSA
has given a term a precise meaning and will know where to look for it.
(b) Terms used in this part are defined as follows:
Approval means a written authorization, including a competent
authority approval, issued by the Associate Administrator, the Associate
Administrator's designee, or as otherwise prescribed in the HMR, to
perform a function for which prior authorization by the Associate
Administrator is required under subchapter C of this chapter (49 CFR
parts 171 through 180).
Associate Administrator means Associate Administrator for Hazardous
Materials Safety, Pipeline and Hazardous Materials Safety
Administration.
Competent Authority means a national agency that is responsible,
under its national law, for the control or regulation of some aspect of
hazardous materials (dangerous goods) transportation. Another term for
Competent Authority is ``Appropriate authority'' which is used in the
International Civil Aviation Organization's (ICAO) Technical
Instructions for the Safe Transport of Dangerous Goods by Air. The
Associate Administrator is the United States Competent Authority for
purposes of 49 CFR part 107.
Competent Authority Approval means an approval by the competent
authority that is required under an international standard (for example,
the ICAO Technical Instructions for the Safe Transport of Dangerous
Goods by Air and the International Maritime Dangerous Goods Code). Any
of the following may be considered a competent authority approval if it
satisfies the requirement of an international standard:
(1) A specific regulation in subchapter A or C of this chapter.
(2) A special permit or approval issued under subchapter A or C of
this chapter.
(3) A separate document issued to one or more persons by the
Associate Administrator.
Federal hazardous material transportation law means 49 U.S.C. 5101
et seq.
[[Page 8]]
File or Filed means received by the appropriate PHMSA or other
designated office within the time specified in a regulation or
rulemaking document.
Hazardous material means a substance or material that the Secretary
of Transportation has determined is capable of posing an unreasonable
risk to health, safety, and property when transported in commerce, and
has designated as hazardous under section 5103 of Federal hazardous
materials transportation law (49 U.S.C. 5103). The term includes
hazardous substances, hazardous wastes, marine pollutants, elevated
temperature materials, materials designated as hazardous in the
Hazardous Materials Table (see 49 CFR 172.101), and materials that meet
the defining criteria for hazard classes and divisions in part 173 of
subchapter C of this chapter.
Hazardous Materials Regulations or HMR means the regulations at 49
CFR parts 171 through 180.
Indian tribe has the same meaning given that term in section 4 of
the Indian Self-Determination and Education Assistance Act (25 U.S.C.
450b).
Person means an individual, firm, copartnership, corporation,
company, association, or joint-stock association (including any trustee,
receiver, assignee, or similar representative); or a government or
Indian tribe (or an agency or instrumentality of any government or
Indian tribe) that transports a hazardous material to further a
commercial enterprise or offers a hazardous material for transportation
in commerce. Person does not include the following:
(1) The United States Postal Service.
(2) Any agency or instrumentality of the Federal government, for the
purposes of 49 U.S.C. 5123 (civil penalties) and 5124 (criminal
penalties).
(3) Any government or Indian tribe (or an agency or instrumentality
of any government or Indian tribe) that transports hazardous material
for a governmental purpose.
Political subdivision means a municipality; a public agency or other
instrumentality of one or more States, municipalities, or other
political body of a State; or a public corporation, board, or commission
established under the laws of one or more States.
Preemption determination means an administrative decision by the
Associate Administrator that Federal hazardous materials law does or
does not void a specific State, political subdivision, or Indian tribe
requirement.
Regulations issued under Federal hazardous material transportation
law include this subchapter A (parts 105-110) and subchapter C (parts
171-180) of this chapter, certain regulations in chapter I (United
States Coast Guard) of title 46, Code of Federal Regulations, and in
chapters III (Federal Motor Carrier Safety Administration) and XII
(Transportation Security Administration) of subtitle B of this title, as
indicated by the authority citations therein.
Special permit means a document issued by the Associate
Administrator, the Associate Administrator's designee, or as otherwise
prescribed in the HMR, under the authority of 49 U.S.C. 5117 permitting
a person to perform a function that is not otherwise permitted under
subchapter A or C of this chapter, or other regulations issued under 49
U.S.C. 5101 et seq. (e.g., Federal Motor Carrier Safety routing
requirements).
State means a State of the United States, the District of Columbia,
the Commonwealth of Puerto Rico, the Commonwealth of the Northern
Mariana Islands, the Virgin Islands, American Samoa, Guam, or any other
territory or possession of the United States designated by the
Secretary.
Transports or Transportation means the movement of property and
loading, unloading, or storage incidental to the movement.
Waiver of Preemption means a decision by the Associate Administrator
to forego preemption of a non-Federal requirement--that is, to allow a
State, political subdivision or Indian tribe requirement to remain in
effect. The non-Federal requirement must provide at least as much public
protection as the Federal hazardous materials transportation law and the
regulations
[[Page 9]]
issued under Federal hazardous materials transportation law, and may not
unreasonably burden commerce.
[67 FR 42951, June 25, 2002, as amended at 68 FR 52846, Sept. 8, 2003;
70 FR 56087, Sept. 23, 2005; 70 FR 73158, Dec. 9, 2005; 80 FR 54436,
Sept. 10, 2015]
Subpart B_General Procedures
Sec. 105.15 Defined terms used in this subpart.
The following defined terms (see subpart A of this part) appear in
this subpart: Approval; Federal hazardous material transportation law;
Hazardous material; Hazardous materials regulations; Indian tribe;
Preemption determination; Special permit; State; Transportation; Waiver
of preemption
[67 FR 42951, June 25, 2002, as amended at 70 FR 73159, Dec. 9, 2005]
Obtaining Guidance and Public Information
Sec. 105.20 Guidance and interpretations.
(a) Hazardous materials regulations. You can obtain information and
answers to your questions on compliance with the hazardous materials
regulations (49 CFR parts 171 through 180) and interpretations of those
regulations by contacting PHMSA's Office of Hazardous Materials Safety
as follows:
(1) Call the Hazardous Materials Information Center at 1-800-467-
4922 (in Washington, DC, call (202) 366-4488). The Center is staffed
from 9 a.m. through 5 p.m. Eastern time, Monday through Friday except
Federal holidays. After hours, you can leave a recorded message and your
call will be returned by the next business day.
(2) E-mail the Hazardous Materials Information Center at
[email protected].
(3) Obtain hazardous materials safety information via the Internet
at http://www.phmsa.dot.gov.
(4) Send a letter, with your return address and a daytime telephone
number, to: Standards and Rulemaking Division, Pipeline and Hazardous
Materials Safety Administration, Attn: PHH-10, U.S. Department of
Transportation, East Building, 1200 New Jersey Avenue, SE., Washington,
DC 20590-0001.
(b) Federal hazardous materials transportation law and preemption.
You can obtain information and answers to your questions on Federal
hazardous materials transportation law, 49 U.S.C. 5101 et seq., and
Federal preemption of State, local, and Indian tribe hazardous material
transportation requirements, by contacting PHMSA's Office of the Chief
Counsel as follows:
(1) Call the office of the Chief Counsel at (202) 366-4400 from 9
a.m. to 5 p.m. Eastern time, Monday through Friday except Federal
holidays.
(2) Access information from the Office of the Chief Counsel via the
Internet at http://www.phmsa.dot.gov.
(3) Send a letter, with your return address and a daytime telephone
number, to: Office of the Chief Counsel, Pipeline and Hazardous
Materials Safety Administration, Attn: PHC-10, U.S. Department of
Transportation, East Building, 1200 New Jersey Avenue, SE., Washington,
DC 20590-0001.
(4) Contact the Office of the Chief Counsel for a copy of
applications for preemption determinations, waiver of preemption
determinations, and inconsistency rulings received by PHMSA before
February 1, 1997.
[70 FR 56087, Sept. 23, 2005, as amended at 72 FR 55682, Oct. 1, 2007;
76 FR 56310, Sept. 13, 2011]
Sec. 105.25 Reviewing public documents.
PHMSA is required by statute to make certain documents and
information available to the public. You can review and copy publicly
available documents and information at the locations described in this
section.
(a) DOT Docket Management System. Unless a particular document says
otherwise, the following documents are available for public review and
copying at the Department of Transportation's Docket Management System,
West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE.,
Washington, DC 20590-0001, or for review and downloading through the
Internet at http://www.regulations.gov.
(1) Rulemaking documents in proceedings started after February 1,
1997, including notices of proposed rulemaking, advance notices of
proposed rulemaking, public comments, related Federal Register notices,
final rules,
[[Page 10]]
appeals, and PHMSA's decisions in response to appeals.
(2) Applications for special permits numbered DOT-E or DOT-SP 11832
and above. Also available are supporting data, memoranda of any informal
meetings with applicants, related Federal Register notices, public
comments, and decisions granting or denying applications for special
permits.
(3) Applications for preemption determinations and waiver of
preemption determinations received by PHMSA after February 1, 1997. Also
available are public comments, Federal Register notices, and PHMSA's
rulings, determinations, decisions on reconsideration, and orders issued
in response to those applications.
(b) Office of Pipeline and Hazardous Materials Safety
Administration's Office of Hazardous Materials Safety. (1) You may
obtain documents (e.g., proposed and final rules, notices, letters of
clarification, safety notices, DOT forms and other documents) by
contacting the Hazardous Materials Information Center at 1-800-467-4922
or through the Internet at http://www.phmsa.dot.gov.
(2) Upon your written request, we will make the following documents
and information available to you:
(i) Appeals under 49 CFR part 107 and PHMSA's decisions issued in
response to those appeals.
(ii) Records of compliance order proceedings and PHMSA compliance
orders.
(iii) Applications for approvals, including supporting data,
memoranda of any informal meetings with applicants, and decisions
granting or denying approvals applications.
(iv) Applications for special permits numbered below DOT-E or DOT-SP
11832 and related background information are available for public review
and copying at the Office of Hazardous Materials Safety, Approvals and
Permits Division, U.S. Department of Transportation, PHH-30, East
Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.
(v) Other information about PHMSA's hazardous materials program
required by statute to be made available to the public for review and
copying and any other information PHMSA decides should be available to
the public.
(3) Your written request to review documents should include the
following:
(i) A detailed description of the documents you wish to review.
(ii) Your name, address, and telephone number.
(4) Send your written request to: Associate Administrator for
Hazardous Materials Safety, Pipeline and Hazardous Materials Safety
Administration, Attn: PHH-1, U.S. Department of Transportation, East
Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.
[70 FR 56088, Sept. 23, 2005, as amended at 70 FR 73159, Dec. 9, 2005;
72 FR 55682, Oct. 1, 2007; 76 FR 56310, Sept. 13, 2011]
Sec. 105.26 Obtaining records on file with PHMSA.
To obtain records on file with PHMSA, other than those described in
Sec. 105.25, you must file a request with PHMSA under the Freedom of
Information Act (FOIA) (5 U.S.C. 552). The procedures for filing a FOIA
request are contained in 49 CFR part 7.
Sec. 105.30 Information made available to the public and request
for confidential treatment.
When you submit information to PHMSA during a rulemaking proceeding,
as part of your application for special permit or approval, or for any
other reason, we may make that information publicly available unless you
ask that we keep the information confidential.
(a) Asking for confidential treatment. You may ask us to give
confidential treatment to information you give to the agency by taking
the following steps:
(1) Mark ``confidential'' on each page of the original document you
would like to keep confidential.
(2) Send us, along with the original document, a second copy of the
original document with the confidential information deleted.
(3) Explain why the information you are submitting is confidential
(for example, it is exempt from mandatory public disclosure under the
Freedom of
[[Page 11]]
Information Act, 5 U.S.C. 552 or it is information referred to in 18
U.S.C. 1905).
(b) PHMSA Decision. PHMSA will decide whether or not to treat your
information as confidential. We will notify you, in writing, of a
decision to grant or deny confidentiality at least five days before the
information is publicly disclosed, and give you an opportunity to
respond.
[67 FR 42951, June 25, 2002, as amended at 70 FR 73159, Dec. 9, 2005]
Serving Documents
Sec. 105.35 Serving documents in PHMSA proceedings.
(a) Service by PHMSA. We may serve the document by one of the
following methods, except where a different method of service is
specifically required:
(1) Registered or certified mail.
(i) If we serve a document by registered or certified mail, it is
considered served when mailed.
(ii) An official United States Postal Service receipt from the
registered or certified mailing is proof of service.
(iii) We may serve a person's authorized representative or agent by
registered or certified mail, or in any other manner authorized by law.
Service on a person's authorized agent is the same as service on the
person.
(2) Personal service.
(3) Publication in the Federal Register.
(4) Electronic service. (i) Service by electronic means if consented
to in writing by the party to be served.
(ii) For all special permits and approvals actions, electronic
service is authorized.
(b) Service by others. If you are required under this subchapter to
serve a person with a document, serve the document by one of the
following methods, except where a different method of service is
specifically required:
(1) Registered or certified mail.
(i) If you serve a document by registered or certified mail, it is
considered served when mailed.
(ii) An official United States Postal Service receipt from the
registered or certified mailing is proof of service.
(iii) You may serve a person's authorized representative or agent by
registered or certified mail or in any other manner authorized by law.
Service on a person's authorized agent is the same as service on the
person.
(2) Personal service.
(3) Electronic service.
(i) In a proceeding under Sec. 107.317 of this subchapter (an
administrative law judge proceeding), you may electronically serve
documents on us.
(ii) Serve documents electronically through the Internet at http://
www.regulations.gov.
[67 FR 42951, June 25, 2002, as amended at 72 FR 55682, Oct. 1, 2007; 76
FR 460, Jan. 5, 2011]
Sec. 105.40 Designated agents for non-residents.
(a) General requirement. If you are not a resident of the United
States but are required by this subchapter or subchapter C of this
chapter to designate a permanent resident of the United States to act as
your agent and receive documents on your behalf, you must prepare a
designation and file it with us.
(b) Agents. An agent, also known as ``agent for service of
process'':
(1) May be an individual, a firm, or a domestic corporation.
(2) May represent any number of principals.
(3) May not reassign responsibilities under a designation to another
person.
(c) Preparing a designation. Your designation must be written and
dated, and it must contain the following information:
(1) The section in the HMR that requires you to file a designation.
(2) A certification that the designation is in the correct legal
form required to make it valid and binding on you under the laws,
corporate bylaws, and other requirements that apply to designations at
the time and place you are making the designation.
(3) Your full legal name, the principal name of your business, and
your mailing address.
(4) A statement that your designation will remain in effect until
you withdraw or replace it.
(5) The legal name and mailing address of your agent.
(6) A declaration of acceptance signed by your agent.
[[Page 12]]
(d) Each designation must be submitted to: Approvals and Permits
Division, Pipeline and Hazardous Materials Safety Administration, Attn:
PHH-30, U.S. Department of Transportation, East Building, 1200 New
Jersey Avenue SE., Washington, DC 20590-0001 or by electronic mail to:
[email protected] or [email protected] as appropriate.
(e) Designations are binding. You are bound by your designation of
an agent, even if you did not follow all the requirements in this
section, until we reject your designation.
[67 FR 42951, June 25, 2002, as amended at 70 FR 56088, Sept. 23, 2005;
70 FR 73159, Dec. 9, 2005; 72 FR 55682, Oct. 1, 2007; 75 FR 27211, May
14, 2010; 76 FR 56310, Sept. 13, 2011; 78 FR 15321, Mar. 11, 2013]
Subpoenas
Sec. 105.45 Issuing a subpoena.
(a) Subpoenas explained. A subpoena is a document that may require
you to attend a proceeding, produce documents or other physical evidence
in your possession or control, or both. PHMSA may issue a subpoena
either on its initiative or at the request of someone participating in a
proceeding. Anyone who requests that PHMSA issue a subpoena must show
that the subpoena seeks information that will materially advance the
proceeding.
(b) Attendance and mileage expenses. (1) If you receive a subpoena
to attend a proceeding under this part, you may receive money to cover
attendance and mileage expenses. The attendance and mileage fees will be
the same as those paid to a witness in a proceeding in the district
courts of the United States.
(2) If PHMSA issues a subpoena to you based upon a request, the
requester must serve a copy of the original subpoena on you, as required
in Sec. 105.50. The requester must also include attendance and mileage
fees with the subpoena unless the requester asks PHMSA to pay the
attendance and mileage fees because of demonstrated financial hardship
and PHMSA agrees to do so.
(3) If PHMSA issues a subpoena at the request of an officer or
agency of the Federal government, the officer or agency is not required
to include attendance and mileage fees when serving the subpoena. The
officer or agency must pay the fees before you leave the hearing at
which you testify.
Sec. 105.50 Serving a subpoena.
(a) Personal service. Anyone who is not an interested party and who
is at least 18 years of age may serve you with a subpoena and fees by
handing the subpoena and fees to you, by leaving them at your office
with the individual in charge, or by leaving them at your house with
someone who lives there and is capable of making sure that you receive
them. If PHMSA issues a subpoena to an entity, rather than an
individual, personal service is made by delivering the subpoena and fees
to the entity's registered agent for service of process or to any
officer, director or agent in charge of any of the entity's offices.
(b) Service by mail. You may be served with a copy of a subpoena and
fees by certified or registered mail at your last known address. Service
of a subpoena and fees may also be made by registered or certified mail
to your agent for service of process or any of your representatives at
that person's last known address.
(c) Other methods. You may be served with a copy of a subpoena by
any method where you receive actual notice of the subpoena and receive
the fees before leaving the hearing at which you testify.
(d) Filing after service. After service is complete, the individual
who served a copy of a subpoena and fees must file the original subpoena
and a certificate of service with the PHMSA official who is responsible
for conducting the hearing.
Sec. 105.55 Refusal to obey a subpoena.
(a) Quashing or modifying a subpoena. If you receive a subpoena, you
can ask PHMSA to overturn (``quash'') or modify the subpoena within 10
days after the subpoena is served on you. Your request must briefly
explain the reasons you are asking for the subpoena to be quashed or
modified. PHMSA may then do the following:
(1) Deny your request.
(2) Quash or modify the subpoena.
[[Page 13]]
(3) Grant your request on the condition that you satisfy certain
specified requirements.
(b) Failure to obey. If you disobey a subpoena, PHMSA may ask the
Attorney General to seek help from the United States District Court for
the appropriate District to compel you, after notice, to appear before
PHMSA and give testimony, produce subpoenaed documents or physical
evidence, or both.
PART 106_RULEMAKING PROCEDURES--Table of Contents
Subpart A_PHMSA Rulemaking Documents
Sec.
106.5 Defined terms used in this subpart.
106.10 Process for issuing rules.
106.15 Advance notice of proposed rulemaking.
106.20 Notice of proposed rulemaking.
106.25 Revising regulations without first issuing an ANPRM or NPRM.
106.30 Final rule.
106.35 Interim final rule.
106.40 Direct final rule.
106.45 Tracking rulemaking actions.
Subpart B_Participating in the Rulemaking Process
106.50 Defined terms used in this subpart.
106.55 Public participation in the rulemaking process.
Written Comments
106.60 Filing comments.
106.65 Required information for written comments.
106.70 Where and when to file comments.
106.75 Extension of time to file comments.
Public Meetings and Other Proceedings
106.80 Public meeting procedures.
106.85 Requesting a public meeting.
106.90 Other rulemaking proceedings.
Petitions for Rulemaking
106.95 Requesting a change to the regulations.
106.100 Required information for a petition for rulemaking.
106.105 PHMSA response to a petition for rulemaking.
Appeals
106.110 Appealing a PHMSA action.
106.115 Required information for an appeal.
106.120 Appeal deadline.
106.125 Filing an appeal.
106.130 PHMSA response to an appeal.
Authority: 49 U.S.C. 5101-5127; 49 CFR 1.53.
Source: 67 FR 42954, June 25, 2002, unless otherwise noted.
Editorial Note: Nomenclature changes to part 106 appear at 70 FR
56088, Sept. 23, 2005.
Subpart A_PHMSA Rulemaking Documents
Sec. 106.5 Defined terms used in this subpart.
The following defined terms (see part 105, subpart A, of this
subchapter) appear in this subpart: File; Person; State.
Sec. 106.10 Process for issuing rules.
(a) PHMSA (``we'') uses informal rulemaking procedures under the
Administrative Procedure Act (5 U.S.C. 553) to add, amend, or delete
regulations. To propose or adopt changes to a regulation, PHMSA may
issue one or more of the following documents. We publish the following
rulemaking documents in the Federal Register unless we name and
personally serve a copy of a rule on every person subject to it:
(1) An advance notice of proposed rulemaking.
(2) A notice of proposed rulemaking.
(3) A final rule.
(4) An interim final rule.
(5) A direct final rule.
(b) Each of the rulemaking documents in paragraph (a) of this
section generally contains the following information:
(1) The topic involved in the rulemaking document.
(2) PHMSA's legal authority for issuing the rulemaking document.
(3) How interested persons may participate in the rulemaking
proceeding (for example, by filing written comments or making oral
presentations).
(4) Whom to call if you have questions about the rulemaking
document.
(5) The date, time, and place of any public meetings being held to
discuss the rulemaking document.
(6) The docket number and regulation identifier number (RIN) for the
rulemaking proceeding.
[67 FR 42954, June 25, 2002, as amended at 70 FR 56088, Sept. 23, 2005]
[[Page 14]]
Sec. 106.15 Advance notice of proposed rulemaking.
An advance notice of proposed rulemaking (ANPRM) tells the public
that PHMSA is considering an area for rulemaking and requests written
comments on the appropriate scope of the rulemaking or on specific
topics. An advance notice of proposed rulemaking may or may not include
the text of potential changes to a regulation.
Sec. 106.20 Notice of proposed rulemaking.
A notice of proposed rulemaking (NPRM) contains PHMSA's specific
proposed regulatory changes for public comment and contains supporting
information. It generally includes proposed regulatory text.
Sec. 106.25 Revising regulations without first issuing an ANPRM or NPRM.
PHMSA may add, amend, or delete regulations without first issuing an
ANPRM or NPRM in the following situations:
(a) We may go directly to a final rule or interim final rule if, for
good cause, we find that a notice of proposed rulemaking is
impracticable, unnecessary, or contrary to the public interest. We must
place that finding and a brief statement of the reasons for it in the
final rule or interim final rule.
(b) We may issue a direct final rule (see Sec. 106.40).
Sec. 106.30 Final rule.
A final rule sets out new regulatory requirements and their
effective date. A final rule will also identify issues raised by
commenters in response to the notice of proposed rulemaking and give the
agency's response.
Sec. 106.35 Interim final rule.
An interim final rule is issued without first issuing a notice of
proposed rulemaking and accepting public comments and sets out new
regulatory requirements and their effective date. PHMSA may issue an
interim final rule if it finds, for good cause, that notice and public
procedure are impracticable, unnecessary, or contrary to the public
interest. PHMSA will clearly set out this finding in the interim final
rule. After receiving and reviewing public comments, as well as any
other relevant documents, PHMSA may revise the interim final rule and
then issue a final rule.
Sec. 106.40 Direct final rule.
A direct final rule makes regulatory changes and states that the
regulatory changes will take effect on a specified date unless PHMSA
receives an adverse comment or notice of intent to file an adverse
comment within the comment period--generally 60 days after the direct
final rule is published in the Federal Register.
(a) Actions taken by direct final rule. We may use direct final
rulemaking procedures to issue rules that do any of the following:
(1) Make minor substantive changes to regulations.
(2) Incorporate by reference the latest edition of technical or
industry standards.
(3) Extend compliance dates.
(4) Make noncontroversial changes to regulations. We must determine
and publish a finding that use of direct final rulemaking, in this
situation, is in the public interest and unlikely to result in adverse
comment.
(b) Adverse comment. An adverse comment explains why a rule would be
inappropriate, or would be ineffective or unacceptable without a change.
It may challenge the rule's underlying premise or approach. Under the
direct final rule process, we do not consider the following types of
comments to be adverse:
(1) A comment recommending another rule change, in addition to the
change in the direct final rule at issue, unless the commenter states
why the direct final rule would be ineffective without the change.
(2) A frivolous or irrelevant comment.
(c) Confirmation of effective date. We will publish a confirmation
document in the Federal Register, generally within 15 days after the
comment period closes, if we have not received an adverse comment or
notice of intent to file an adverse comment. The confirmation document
tells the public the effective date of the rule--either the date stated
in the direct final rule or at least 30 days after the publication
[[Page 15]]
date of the confirmation document, whichever is later.
(d) Withdrawing a direct final rule. (1) If we receive an adverse
comment or notice of intent to file an adverse comment, we will publish
a document in the Federal Register before the effective date of the
direct final rule advising the public and withdrawing the direct final
rule in whole or in part.
(2) If we withdraw a direct final rule because of an adverse
comment, we may incorporate the adverse comment into a later direct
final rule or may publish a notice of proposed rulemaking.
(e) Appeal. You may appeal PHMSA's issuance of a direct final rule
(see Sec. 106.115) only if you have previously filed written comments
(see Sec. 106.60) to the direct final rule.
Sec. 106.45 Tracking rulemaking actions.
The following identifying numbers allow you to track PHMSA's
rulemaking activities:
(a) Docket number. We assign an identifying number, called a docket
number, to each rulemaking proceeding. Each rulemaking document that
PHMSA issues in a particular rulemaking proceeding will display the same
docket number. This number allows you to do the following:
(1) Associate related documents that appear in the Federal Register.
(2) Search the DOT Docket Management System (``DMS'') for
information on particular rulemaking proceedings--including notices of
proposed rulemaking, public comments, petitions for rulemaking, appeals,
records of additional rulemaking proceedings and final rules. There are
two ways you can search the DMS:
(i) Visit the public docket room and review and copy any docketed
materials during regular business hours. The DOT Docket Management
System is located at the U.S. Department of Transportation, West
Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE.,
Washington, DC 20590-0001.
(ii) View and download docketed materials through the Internet at
http://www.regulations.gov.
(b) Regulation identifier number. The Department of Transportation
publishes a semiannual agenda of all current and projected Department of
Transportation rulemakings, reviews of existing regulations, and
completed actions. This semiannual agenda appears in the Unified Agenda
of Federal Regulations that is published in the Federal Register in
April and October of each year. The semiannual agenda tells the public
about the Department's--including PHMSA's--regulatory activities. The
Department assigns a regulation identifier number (RIN) to each
individual rulemaking proceeding in the semiannual agenda. This number
appears on all rulemaking documents published in the Federal Register
and makes it easy for you to track those rulemaking proceedings in both
the Federal Register and the semiannual regulatory agenda itself, as
well as to locate all documents in the Docket Management System
pertaining to a particular rulemaking.
[70 FR 56088, Sept. 23, 2005, as amended at 72 FR 55682, Oct. 1, 2007]
Subpart B_Participating in the Rulemaking Process
Sec. 106.50 Defined terms used in this subpart.
The following defined terms (see part 105, subpart A, of this
subchapter) appear in this subpart: File; Person; Political subdivision;
State.
Sec. 106.55 Public participation in the rulemaking process.
You may participate in PHMSA's rulemaking process by doing any of
the following:
(a) File written comments on any rulemaking document that asks for
comments, including an advance notice of proposed rulemaking, notice of
proposed rulemaking, interim final rule, or direct final rule.
(b) Ask that we hold a public meeting in any rulemaking proceeding
and participate in any public meeting that we hold.
(c) File a petition for rulemaking that asks us to add, amend, or
delete a regulation.
(d) File an appeal that asks us to reexamine our decision to issue
all or part of a final rule, interim final rule, or direct final rule.
[[Page 16]]
Written Comments
Sec. 106.60 Filing comments.
Anyone may file written comments about proposals made in any
rulemaking document that requests public comments, including any State
government agency, any political subdivision of a State, and any
interested person invited by PHMSA to participate in the rulemaking
process.
Sec. 106.65 Required information for written comments.
Your comments must be in English and must contain the following:
(a) The docket number of the rulemaking document you are commenting
on, clearly set out at the beginning of your comments.
(b) Information, views, or arguments that follow the instructions
for participation that appear in the rulemaking document on which you
are commenting.
(c) All material that is relevant to any statement of fact in your
comments.
(d) The document title and page number of any material that you
reference in your comments.
Sec. 106.70 Where and when to file comments.
(a) Unless you are told to do otherwise in the rulemaking document
on which you are commenting, send your comments to us in either of the
following ways:
(1) By mail to: Docket Management System, U.S. Department of
Transportation, West Building Ground Floor, Room W12-140, 1200 New
Jersey Avenue, SE., Washington, DC 20590-0001.
(2) Through the Internet at http://www.regulations.gov.
(b) Make sure that your comments reach us by the deadline set out in
the rulemaking document on which you are commenting. We will consider
late filed comments to the extent possible.
(c) We may reject comments that are not relevant to the rulemaking.
We may reject comments you file electronically if you do not follow the
electronic filing instructions at the DOT Web site.
[67 FR 42954, June 25, 2002, as amended at 69 FR 54044, Sept. 7, 2004;
72 FR 55682, Oct. 1, 2007]
Sec. 106.75 Extension of time to file comments.
You may ask for more time to file comments on a rulemaking
proceeding. If PHMSA grants your request, it is granted to all persons.
We will notify the public of the extension by publishing a document in
the Federal Register. If PHMSA denies your request, PHMSA will notify
you of the denial. To ask for more time, you must do the following:
(a) File a request for extension at least ten days before the end of
the comment period established in the rulemaking document.
(b) Show that you have good cause for the extension and that an
extension is in the public interest.
(c) Include the docket number of the rulemaking document you are
seeking additional time to comment on, clearly set out at the beginning
of your request.
(d) Send your request to: Docket Management System, U.S. Department
of Transportation, West Building Ground Floor, Room W12-140, 1200 New
Jersey Avenue, SE., Washington, DC 20590-0001.
[67 FR 42954, June 25, 2002, as amended at 72 FR 55682, Oct. 1, 2007]
Public Meetings and Other Proceedings
Sec. 106.80 Public meeting procedures.
A public meeting is a non-adversarial, fact-finding proceeding
conducted by a PHMSA representative. Generally, public meetings are
announced in the Federal Register. Interested persons are invited to
attend and to present their views to the agency on specific issues.
There are no formal pleadings and no adverse parties, and any regulation
issued afterward is not necessarily based exclusively on the record of
the meeting. Sections 556 and 557 of the Administrative Procedure Act (5
U.S.C. 556 and 557) do not apply to public meetings under this part.
[[Page 17]]
Sec. 106.85 Requesting a public meeting.
(a) You may ask for a public meeting by filing a written request
with PHMSA no later than 20 days before the expiration of the comment
period specified in the rulemaking document. Send your request for a
public meeting to: Docket Management System, U.S. Department of
Transportation, West Building Ground Floor, Room W12-140, 1200 New
Jersey Avenue, SE., Washington, DC 20590-0001.
(b) PHMSA will review your request and, if you have shown good cause
for a public meeting, we will grant it and publish a notice of the
meeting in the Federal Register.
[67 FR 42954, June 25, 2002, as amended at 72 FR 55682, Oct. 1, 2007]
Sec. 106.90 Other rulemaking proceedings.
During a rulemaking proceeding, PHMSA may invite you to do the
following:
(a) Participate in a conference at which minutes are taken.
(b) Make an oral presentation.
(c) Participate in any other public proceeding to ensure that PHMSA
makes informed decisions during the rulemaking process and to protect
the public interest, including a negotiated rulemaking or work group led
by a facilitator.
Petitions for Rulemaking
Sec. 106.95 Requesting a change to the regulations.
You may ask PHMSA to add, amend, or delete a regulation by filing a
petition for rulemaking as follows:
(a) For regulations in 49 CFR parts 110, 130, 171 through 180,
submit the petition to: Standards and Rulemaking Division, Pipeline and
Hazardous Materials Safety Administration, Attn: PHH-10, U.S. Department
of Transportation, East Building, 1200 New Jersey Avenue, SE.,
Washington, DC 20590-0001.
(b) For regulations in 49 CFR parts 105, 106, or 107, submit the
petition to: Office of the Chief Counsel, Pipeline and Hazardous
Materials Safety Administration, Attn: PHC-10, U.S. Department of
Transportation, East Building, 1200 New Jersey Avenue, SE., Washington,
DC 20590-0001.
[70 FR 56089, Sept. 23, 2005, as amended at 72 FR 55683, Oct. 1, 2007;
76 FR 56310, Sept. 13, 2011]
Sec. 106.100 Required information for a petition for rulemaking.
(a) You must include the following information in your petition for
rulemaking:
(1) A summary of your proposed action and an explanation of its
purpose.
(2) The language you propose for a new or amended rule, or the
language you would delete from a current rule.
(3) An explanation of your interest in your proposed action and the
interest of anyone you may represent.
(4) Information and arguments that support your proposed action,
including relevant technical and scientific data available to you.
(5) Any specific cases that support or demonstrate the need for your
proposed action.
(b) If the impact of your proposed action is substantial, and data
or other information about that impact are available to you, we may ask
that you provide information about the following:
(1) The costs and benefits of your proposed action to society in
general, and identifiable groups within society in particular.
(2) The direct effects, including preemption effects under section
5125 of Federal hazardous materials transportation law, of your proposed
action on States, on the relationship between the Federal government and
the States, and on the distribution of power and responsibilities among
the various levels of government. (See 49 CFR part 107, subpart C,
regarding preemption.)
(3) The regulatory burden of your proposed action on small
businesses, small organizations, small governmental jurisdictions, and
Indian tribes.
(4) The recordkeeping and reporting burdens of your proposed action
and whom they would affect.
(5) The effect of your proposed action on the quality of the natural
and social environments.
[[Page 18]]
Sec. 106.105 PHMSA response to a petition for rulemaking.
We will review and respond to your petition for rulemaking as
follows:
------------------------------------------------------------------------
And if we
If your petition is . . . determine that . . Then . . .
.
------------------------------------------------------------------------
(a) Incomplete.................. .................. We may return your
petition with a
written
explanation.
------------------------------------------------------------------------
(b) Complete.................... Your petition does We will notify you
not justify a in writing that
rulemaking action. we will not start
a rulemaking
proceeding.
------------------------------------------------------------------------
(c) Complete.................... Your petition does We will notify you
justify a in writing that
rulemaking action. we will start a
rulemaking
proceeding.
------------------------------------------------------------------------
Appeals
Sec. 106.110 Appealing a PHMSA Action.
You may appeal the following PHMSA actions:
(a) PHMSA's issuance of a final rule or PHMSA's withdrawal of a
notice of proposed rulemaking under the rulemaking procedures in this
part. However, you may appeal PHMSA's issuance of a direct final rule
only if you previously filed comments to the direct final rule (see
Sec. 106.40(e)).
(b) Any PHMSA decision on a petition for rulemaking.
Sec. 106.115 Required information for an appeal.
(a) Appeal of a final rule or withdrawal of a notice of proposed
rulemaking. If you appeal PHMSA's issuance of a final rule or PHMSA's
withdrawal of a notice of proposed rulemaking, your appeal must include
the following:
(1) The docket number of the rulemaking you are concerned about,
clearly set out at the beginning of your appeal.
(2) A brief statement of your concern about the final rule or the
withdrawal of notice of proposed rulemaking at issue.
(3) An explanation of why compliance with the final rule is not
practical, reasonable, or in the public interest.
(4) If you want PHMSA to consider more facts, the reason why you did
not present those facts within the time given during the rulemaking
process for public comment.
(b) Appeal of a decision. If you appeal PHMSA's decision on a
petition for rulemaking, you must include the following:
(1) The contested aspects of the decision.
(2) Any new arguments or information.
Sec. 106.120 Appeal deadline.
(a) Appeal of a final rule or withdrawal of a notice of proposed
rulemaking. If you appeal PHMSA's issuance of a final rule or PHMSA's
withdrawal of a proposed rulemaking, your appeal document must reach us
no later than 30 days after the date PHMSA published the regulation or
the withdrawal notice in the Federal Register. After that time, PHMSA
will consider your appeal to be a petition for rulemaking under Sec.
106.100.
(b) Appeal of a decision. If you appeal PHMSA's decision on a
petition for rulemaking, your appeal document must reach us no later
than 30 days from the date PHMSA served you with written notice of
PHMSA's decision.
[70 FR 56089, Sept. 23, 2005]
Sec. 106.125 Filing an appeal.
Send your appeal to: Docket Management System, U.S. Department of
Transportation, West Building Ground Floor, Room W12-140, 1200 New
Jersey Avenue, SE., Washington, DC 20590-0001.
[67 FR 42954, June 25, 2002, as amended at 72 FR 55682, Oct. 1, 2007]
Sec. 106.130 PHMSA response to an appeal.
Unless PHMSA provides otherwise, filing an appeal will not keep a
final rule from becoming effective. We will handle an appeal according
to the following procedures:
(a) Appeal of a final rule or withdrawal of a notice of proposed
rulemaking. (1) We may consolidate your appeal with other appeals of the
same rule.
(2) We may grant or deny your appeal, in whole or in part, without
further rulemaking proceedings, unless granting your appeal would result
in the issuance of a new final rule.
[[Page 19]]
(3) If we decide to grant your appeal, we may schedule further
proceedings and an opportunity to comment.
(4) PHMSA will notify you, in writing, of the action on your appeal
within 90 days after the date that PHMSA published the final rule or
withdrawal of notice of proposed rulemaking at issue in the Federal
Register. If we do not issue a decision on your appeal within the 90-day
period and we anticipate a substantial delay, we will notify you
directly about the delay and will give you an expected decision date. We
will also publish a notice of the delay in the Federal Register.
(b) Appeal of a decision. (1) We will not consider your appeal if it
merely repeats arguments that PHMSA has previously rejected.
(2) PHMSA will notify you, in writing, of the action on your appeal
within 90 days after the date that PHMSA served you with written notice
of its decision on your petition for rulemaking. If we do not issue a
decision on your appeal within the 90-day period, and we anticipate a
substantial delay, we will notify you directly about the delay and will
give you an expected decision date.
PART 107_HAZARDOUS MATERIALS PROGRAM PROCEDURES--Table of Contents
Subpart A_Definitions
Sec.
107.1 Definitions.
Subpart B_Special Permits
107.101 Purpose and scope.
107.105 Application for special permit.
107.107 Application for party status.
107.109 Application for renewal.
107.111 Withdrawal.
107.113 Application processing and evaluation.
107.117 Emergency processing.
107.121 Modification, suspension or termination of special permit or
grant of party status.
107.123 Reconsideration.
107.125 Appeal.
107.127 Availability of documents for public inspection.
Subpart C_Preemption
107.201 Purpose and scope.
107.202 Standards for determining preemption.
Preemption Determinations
107.203 Application.
107.205 Notice.
107.207 Processing.
107.209 Determination.
107.211 Petition for reconsideration.
107.213 Judicial review.
Waiver of Preemption Determinations
107.215 Application.
107.217 Notice.
107.219 Processing.
107.221 Determination.
107.223 Petition for reconsideration.
107.227 Judicial review.
Subpart D_Enforcement
107.301 Delegated authority for enforcement.
107.303 Purpose and scope.
107.305 Investigations.
Compliance Orders and Civil Penalties
107.307 General.
107.309 Warning letters.
107.310 Ticketing.
107.311 Notice of probable violation.
107.313 Reply.
107.315 Admission of violations.
107.317 Informal response.
107.319 Request for a hearing.
107.321 Hearing.
107.323 ALJ's decision.
107.325 Appeals.
107.327 Compromise and settlement.
107.329 Maximum penalties.
107.331 Assessment considerations.
Criminal Penalties
107.333 Criminal penalties generally.
107.335 Referral for prosecution.
107.336 Limitation on fines and penalties.
Injunctive Action
107.337 Injunctions generally.
107.338 Prohibition of hazardous materials operations.
107.339 Imminent hazards.
Appendix A to Subpart D of Part 107--Guidelines for Civil Penalties
Subpart E_Designation of Approval and Certification Agencies
107.401 Purpose and scope.
107.402 Application for designation as an approval or certification
agency.
107.403 Designation of certification agencies.
107.404 Conditions of designation.
[[Page 20]]
107.405 [Reserved]
Subpart F_Registration of Cargo Tank and Cargo Tank Motor Vehicle
Manufacturers, Assemblers, Repairers, Inspectors, Testers, and Design
Certifying Engineers
107.501 Scope.
107.502 General registration requirements.
107.503 Registration statement.
107.504 Period of registration, updates, and record retention.
Subpart G_Registration of Persons Who Offer or Transport Hazardous
Materials
107.601 Applicability.
107.606 Exceptions.
107.608 General registration requirements.
107.612 Amount of fee.
107.616 Payment procedures.
107.620 Recordkeeping requirements.
Subpart H_Approvals, Registrations and Submissions
107.701 Purpose and scope.
107.705 Registrations, reports, and applications for approval.
107.709 Processing of an application for approval, including an
application for renewal or modification.
107.711 Withdrawal.
107.713 Approval modification, suspension or termination.
107.715 Reconsideration.
107.717 Appeal.
Subpart I_Approval of Independent Inspection Agencies, Cylinder
Requalifiers, and Non-domestic Chemical Analyses and Tests of DOT
Specification Cylinders
107.801 Purpose and scope.
107.803 Approval of an independent inspection agency (IIA).
107.805 Approval of cylinder and pressure receptacle requalifiers.
107.807 Approval of non-domestic chemical analyses and tests.
107.809 Conditions of UN pressure receptacle approvals.
Appendix A to Part 107--Standard Operating Procedures for Special
Permits and Approvals
Authority: 49 U.S.C. 5101-5128, 44701; Pub. L. 101-410 section 4;
Pub. L. 104-121, sections 212-213; Pub. L. 104-134, section 31001; Pub.
L. 114-74 section 4 (28 U.S.C. 2461 note); 49 CFR 1.81 and 1.97.
Editorial Note: Nomenclature changes to part 107 appear at 67 FR
61011, Sept. 27, 2002, 70 FR 56089, Sept. 23, 2005, and 70 FR 73159,
Dec. 9, 2005.
Subpart A_Definitions
Sec. 107.1 Definitions.
All terms defined in 49 U.S.C. 5102 are used in their statutory
meaning. Other terms used in this part are defined as follows:
Acting knowingly means acting or failing to act while
(1) Having actual knowledge of the facts giving rise to the
violation, or
(2) Having the knowledge that a reasonable person acting in the same
circumstances and exercising due care would have had.
Administrator means the Administrator, Pipeline and Hazardous
Materials Safety Administration or his or her delegate.
Applicant means the person in whose name a special permit, approval,
registration, a renewed or modified special permit or approval, or party
status to a special permit is requested to be issued.
Applicant fitness means a determination by PHMSA, the Associate
Administrator's designee, or as otherwise prescribed in the HMR, that a
special permit or approval applicant is fit to conduct operations
requested in the application or an authorized special permit or
approval.
Application means a request under subpart B of this part for a
special permit, a renewal or modification of a special permit, party
status to a special permit, or a request under subpart H of this part
for an approval, or renewal or modification of an approval.
Approval means a written authorization, including a competent
authority approval, issued by the Associate Administrator, the Associate
Administrator's designee, or as otherwise prescribed in the HMR, to
perform a function for which prior authorization by the Associate
Administrator is required under subchapter C of this chapter (49 CFR
parts 171 through 180).
Approval Agency means an organization or a person designated by the
PHMSA to certify packagings as having been designed, manufactured,
tested, modified, marked or maintained in compliance with applicable DOT
regulations.
Associate Administrator means the Associate Administrator for
Hazardous
[[Page 21]]
Materials Safety, Pipeline and Hazardous Materials Safety
Administration.
Competent Authority means a national agency that is responsible,
under its national law, for the control or regulation of some aspect of
hazardous materials (dangerous goods) transportation. Another term for
Competent Authority is ``Appropriate authority,'' which is used in the
International Civil Aviation Organization's (ICAO) Technical
Instructions for the Safe Transport of Dangerous Goods by Air. The
Associate Administrator is the United States Competent Authority for
purposes of this part 107.
Competent Authority Approval means an approval by the competent
authority that is required under an international standard (for example,
the ICAO Technical Instructions for the Safe Transport of Dangerous
Goods by Air and the International Maritime Dangerous Goods Code). Any
of the following may be considered a competent authority approval if it
satisfies the requirement of an international standard:
(1) A specific regulation in subchapter A or C of this chapter.
(2) A special permit or approval issued under subchapter A or C of
this chapter.
(3) A separate document issued to one or more persons by the
Associate Administrator.
DOT or Department means U.S. Department of Transportation.
Federal hazardous material transportation law means 49 U.S.C. 5101
et seq.
Filed means received by the appropriate PHMSA or other designated
office within the time specified in a regulation or rulemaking document.
Fit or fitness means demonstrated and documented knowledge and
capabilities resulting in the assurance of a level of safety and
performance necessary to ensure compliance with the applicable
provisions and requirements of subchapter C of this chapter or a special
permit or approval issued under subchapter C of this chapter.
Fitness coordinator means the PHMSA Field Operations (FOPS) Division
officer or an authorized representative or special agent of DOT upon
request, such as an Operating Administration (OA) representative, that
conducts reviews regarding an organization's hazardous materials
operations, including such areas as accident history, on-site
inspection, compliance data, and other safety and transportation records
to determine whether a special permit or approval applicant is
determined to be fit as prescribed in Sec. Sec. 107.113(f)(5) and
107.709(d)(5).
Holder means the person in whose name a special permit or approval
has been issued.
Imminent Hazard means the existence of a condition which presents a
substantial likelihood that death, serious illness, severe personal
injury, or substantial endangerment to health, property, or the
environment may occur before the reasonably foreseeable completion of an
administrative hearing or other formal proceeding initiated to abate the
risks of those effects.
Incident means an event resulting in the unintended and
unanticipated release of a hazardous material or an event meeting
incident reporting requirements in Sec. 171.15 or Sec. 171.16 of this
chapter.
Indian Tribe has the same meaning given that term in section 4 of
the Indian Self-Determination and Education Assistance Act (25 U.S.C.
450b).
Insufficient corrective action means that either a PHMSA Field
Operations (FOPS) Division officer or an authorized representative or
special agent of DOT upon request, such as an Operating Administration
(OA) representative, has determined that evidence of an applicant's
corrective action in response to prior enforcement cases is inadequate
or incomplete and the basic safety management controls proposed for the
type of hazardous material, packaging, procedures, and/or mode of
transportation remain inadequate to prevent recurrence of a violation.
Investigation includes investigations authorized under 49 U.S.C.
5121 and inspections authorized under 49 U.S.C. 5118 and 5121.
Manufacturing special permit means a special permit from compliance
with specified requirements that otherwise must be met before
representing, marking, certifying (including requalifying, inspecting,
and testing), selling or offering a packaging or container as
[[Page 22]]
meeting the requirements of subchapter C of this chapter governing its
use in the transportation in commerce of a hazardous material. A
manufacturing special permit is a special permit issued to a
manufacturer of packagings who does not offer for transportation or
transport hazardous materials in packagings subject to the special
permit.
Party means a person, other than a holder, authorized to act under
the terms of a special permit.
Person means an individual, firm, copartnership, corporation,
company, association, or joint-stock association (including any trustee,
receiver, assignee, or similar representative); or a government or
Indian tribe (or an agency or instrumentality of any government or
Indian tribe) that transports a hazardous material to further a
commercial enterprise or offers a hazardous material for transportation
in commerce. Person does not include the following:
(1) The United States Postal Service.
(2) Any agency or instrumentality of the Federal government, for the
purposes of 49 U.S.C. 5123 (civil penalties) and 5124 (criminal
penalties.)
(3) Any government or Indian tribe (or an agency or instrumentality
of any government or Indian tribe) that transports hazardous material
for a governmental purpose.
Registration means a written acknowledgment from the Associate
Administrator that a registrant is authorized to perform a function for
which registration is required under subchapter C of this chapter (e.g.,
registration in accordance with 49 CFR 178.503 regarding marking of
packagings). For purposes of subparts A through E, ``registration'' does
not include registration under subpart F or G of this part.
Report means information, other than an application, registration or
part thereof, required to be submitted to the Associate Administrator
pursuant to this subchapter, subchapter B or subchapter C of this
chapter.
Respondent means a person upon whom the PHMSA has served a notice of
probable violation.
Special permit means a document issued by the Associate
Administrator, the Associate Administrator's designee, or as otherwise
prescribed in the HMR, under the authority of 49 U.S.C. 5117 permitting
a person to perform a function that is not otherwise permitted under
subchapters A or C of this chapter, or other regulations issued under 49
U.S.C. 5101 et seq. (e.g., Federal Motor Carrier Safety routing
requirements).
State means a State of the United States, the District of Columbia,
the Commonwealth of Puerto Rico, the Commonwealth of the Northern
Mariana Islands, the Virgin Islands, American Samoa, Guam, or any other
territory or possession of the United States designated by the
Secretary.
Sufficient corrective action means that either a PHMSA Field
Operations officer or an authorized representative or special agent of
DOT upon request, such as an Operating Administration (OA)
representative, has determined that evidence of an applicant's
corrective action in response to prior enforcement cases is sufficient
and the basic safety management controls proposed for the type of
hazardous material, packaging, procedures, and/or mode of transportation
are adequate.
Transports or transportation means the movement of property and
loading, unloading, or storage incidental to the movement.
[Amdt. 107-3, 41 FR 38170, Sept. 9, 1976]
Editorial Note: For Federal Register citations affecting Sec.
107.1, see the List of CFR Sections Affected, which appears in the
Finding Aids section of the printed volume and at www.fdsys.gov.
Subpart B_Special Permits
Source: Amdt. 107-38, 61 FR 21095, May 9, 1996, unless otherwise
noted.
Sec. 107.101 Purpose and scope.
This subpart prescribes procedures for the issuance, modification
and termination of special permits from requirements of this subchapter,
subchapter C of this chapter, or regulations issued under chapter 51 of
49 U.S.C.
[[Page 23]]
Sec. 107.105 Application for special permit.
(a) General. Each application for a special permit or modification
of a special permit and all supporting documents must be written in
English and submitted for timely consideration at least 120 days before
the requested effective date and conform to the following requirements:
(1) The application, including a table of contents, must:
(i) Be submitted to the Associate Administrator for Hazardous
Materials Safety (Attention: General Approvals and Permits, PHH-31),
Pipeline and Hazardous Materials Safety Administration, U.S. Department
of Transportation, East Building, 1200 New Jersey Avenue, SE.,
Washington, DC 20590-0001;
(ii) Be submitted with any attached supporting documentation by
facsimile (fax) to: (202) 366-3753 or (202) 366-3308;
(iii) Be submitted electronically by e-mail to:
[email protected]; or
(iv) Be submitted using PHMSA's online system (table of contents
omitted) at: http://www.phmsa.dot.gov/hazmat /regs/sp-a.
(2) The application must state the name, mailing address, physical
address(es) of all known locations where the special permit would be
used, e-mail address (if available), and telephone number of the
applicant. If the applicant is not an individual, the application must
state the company name, mailing address, physical address(es) of all
known locations where the special permit would be used, e-mail address
(if available), and telephone number of an individual designated as the
point of contact for the applicant for all purposes related to the
application, the name of the company Chief Executive Officer (CEO) or
president, or ranking officer; and the Dun and Bradstreet Data Universal
Numbering System (D-U-N-S) identifier.
(3) If the applicant is not a resident of the United States, in
addition to the information listed in paragraph (a)(2) of this section,
the application must identify and designate an agent that is a permanent
resident of the United States for service in accordance with Sec.
105.40 of this part.
(4) For a manufacturing special permit, in addition to the
information listed in paragraph (a)(2) of this section, the application
must state the name and street address of each of the facilities of the
applicant where manufacturing under the special permit will occur, and
the symbol of the packaging manufacturer (``M'' number), if applicable.
(5) For persons required to be registered in accordance with Subpart
F or G of this part, in addition to the information listed in paragraph
(a)(2) of this section, the application must provide the registration
number or the name of the company to which the registration number is
assigned if different from the applicant. For persons not required to be
registered in accordance with Subpart F or G of this part, in addition
to the information listed in paragraph (a)(2) of this section, the
application must provide a statement indicating that registration is not
required.
(b) Confidential treatment. To request confidential treatment for
information contained in the application, the applicant must comply with
Sec. 105.30(a).
(c) Description of special permit proposal. The application must
include the following information that is relevant to the special permit
proposal:
(1) A citation of the specific regulation from which the applicant
seeks relief;
(2) The proposed mode or modes of transportation, including a
description of all operational controls required;
(3) A detailed description of the proposed special permit (e.g.,
alternative packaging, test, procedure, activity, or hazard
communication, including marking and labeling requirements) including,
as appropriate, written descriptions, drawings, flow charts, plans and
other supporting documents;
(4) A specification of the proposed duration or schedule of events
for which the special permit is sought;
(5) A statement outlining the applicant's basis for seeking relief
from compliance with the specified regulations and, if the special
permit is requested for a fixed period, a description of how compliance
will be achieved at the end of that period. For transportation by air, a
statement outlining
[[Page 24]]
the reason(s) the hazardous material is being transported by air if
other modes are available;
(6) If the applicant seeks emergency processing specified in Sec.
107.117, a statement of supporting facts and reasons;
(7) Identification and description, including an estimated quantity
of each shipment of the hazardous materials planned for transportation
under the special permit or;
(8) Description of each packaging, including specification or
special permit number, as applicable, to be used in conjunction with the
requested special permit;
(9) For alternative packagings, documentation of quality assurance
controls, package design, manufacture, performance test criteria, in-
service performance and service-life limitations;
(10) An estimate of the number of operations expected to be
conducted or number of shipments to be transported under the special
permit;
(11) An estimate of the number of packagings expected to be
manufactured under the special permit, if applicable;
(12) A statement as to whether the special permit being sought is
related to a compliance review, inspection activity, or enforcement
action; and
(13) When a Class 1 material is forbidden for transportation by
aircraft except under a special permit (see Columns 9A and 9B in the
table in 49 CFR 172.101), a certification from an applicant for a
special permit to transport such Class 1 material on passenger-carrying
or cargo-only aircraft with a maximum certificated takeoff weight of
less than 12,500 pounds that no person within the categories listed in
18 U.S.C. 842(i) will participate in the transportation of the Class 1
material.
(14) A statement indicating whether the applicant will be acting as
a shipper (offeror), carrier or both under the terms of the special
permit.
(d) Justification of special permit proposal. The application must
demonstrate that a special permit achieves a level of safety at least
equal to that required by regulation, or if a required safety level does
not exist, is consistent with the public interest. At a minimum, the
application must provide the following:
(1) Information describing all relevant shipping and incident
experience of which the applicant is aware that relates to the
application; and
(2) A statement identifying any increased risk to safety or property
that may result if the special permit is granted, and a description of
the measures to be taken to address that risk; and
(3) Either:
(i) Substantiation, with applicable analyses, data or test results
(e.g., failure mode and effect analysis), that the proposed alternative
will achieve a level of safety that is at least equal to that required
by the regulation from which the special permit is sought; or
(ii) If the regulations do not establish a level of safety, an
analysis that identifies each hazard, potential failure mode and the
probability of its occurrence, and how the risks associated with each
hazard and failure mode are controlled for the duration of an activity
or life-cycle of a packaging.
[76 FR 460, Jan. 5, 2011, as amended at 76 FR 44500, July 26, 2011; 76
FR 43524, July 20, 2011; 76 FR 56310, Sept. 13, 2011]
Sec. 107.107 Application for party status.
(a) Any person eligible to apply for a special permit may apply to
be a party to an application or an existing special permit, other than a
manufacturing special permit.
(b) Each application filed under this section must conform to the
following requirements:--
(1) The application must:
(i) Be submitted to the Associate Administrator for Hazardous
Materials Safety (Attention: General Approvals and Permits, PHH-31),
Pipeline and Hazardous Materials Safety Administration, U.S. Department
of Transportation, East Building, 1200 New Jersey Avenue, SE.,
Washington, DC 20590-0001;
(ii) Be submitted with any attached supporting documentation by
facsimile (fax) to: (202) 366-3753 or (202) 366-3308; or
(iii) Be submitted by electronically by e-mail to:
[email protected], or on-line at: http://www.phmsa.dot.gov/hazmat /
regs/sp-a.
[[Page 25]]
(2) The application must identify by number the special permit
application or special permit to which the applicant seeks to become a
party.
(3) The application must state the name, mailing address, physical
address(es) of all known locations where the special permit would be
used, e-mail address (if available), and telephone number of the
applicant. If the applicant is not an individual, the application must
state the company name, mailing address, physical address(es) of all
known locations where the special permit would be used, e-mail address
(if available), and telephone number of an individual designated as the
point of contact for the applicant for all purposes related to the
application, the name of the company Chief Executive Officer (CEO),
president, or ranking executive officer and the Dun and Bradstreet Data
Universal Numbering System (D-U-N-S) identifier. In addition, each
applicant must state why party status to the special permit is needed
and must submit a certification of understanding of the provisions of
the special permit to which party status is being requested.
(4) If the applicant is not a resident of the United States, the
application must identify and designate an agent that is a permanent
resident of the United States for service in accordance with Sec.
105.40 of part.
(5) For a Class 1 material that is forbidden for transportation by
aircraft except under a special permit (see Columns 9A and 9B in the
table in 49 CFR 172.101), a certification from an applicant for party
status to a special permit to transport such Class 1 material on
passenger-carrying or cargo-only aircraft with a maximum certificated
takeoff weight of less than 12,500 pounds that no person within the
categories listed in 18 U.S.C. 842(i) will participate in the
transportation of the Class 1 material.
(6) The applicant must certify that the applicant has not previously
been granted party status to the special permit. If the applicant has
previously been granted party status, the applicant must follow renewal
procedures as specified in Sec. 107.109.
(7) A statement indicating whether the applicant will be acting as a
shipper (offeror), carrier or both under the terms of the special
permit.
(c) The Associate Administrator may grant or deny an application for
party status in the manner specified in Sec. 107.113(e) and (f) of this
subpart.
(d) A party to a special permit is subject to all terms of that
special permit, including the expiration date. If a party to a special
permit wishes to renew party status, the special permit renewal
procedures set forth in Sec. 107.109 apply.
[76 FR 461, Jan. 5, 2011, as amended at 76 FR 44500, July 26, 2011; 76
FR 43524, July 20, 2011; 76 FR 56310, Sept. 13, 2011]
Sec. 107.109 Application for renewal.
(a) Each application for renewal of a special permit or party status
to a special permit must conform to the following requirements:
(1) The application must:
(i) Be submitted to the Associate Administrator for Hazardous
Materials Safety (Attention: General Approvals and Permits, PHH-31),
Pipeline and Hazardous Materials Safety Administration, U.S. Department
of Transportation, East Building, 1200 New Jersey Avenue, SE.,
Washington, DC 20590-0001;
(ii) Be submitted with any attached supporting documentation
submitted in an appropriate format by facsimile (fax) to: (202) 366-3753
or (202) 366-3308; or
(iii) Be submitted electronically by e-mail to:
[email protected]; or on-line at: http://www.phmsa.dot.gov/hazmat /
regs/sp-a.
(2) The application must identify by number the special permit for
which renewal is requested.
(3) The application must state the name, mailing address, physical
address(es) of all known new locations not previously identified in the
application where the special permit would be used and all locations not
previously identified where the special permit was used, e-mail address
(if available), and telephone number of the applicant. If the applicant
is not an individual, the application must state the name, mailing
address, physical address(es) of all known new locations not previously
identified in the application where the
[[Page 26]]
special permit would be used and all locations not previously identified
where the special permit was used, e-mail address (if available), and
telephone number of an individual designated as the point of contact for
the applicant for all purposes related to the application, the name of
the company Chief Executive Officer (CEO), president, or ranking
executive officer, and the Dun and Bradstreet Data Universal Numbering
System (D-U-N-S) identifier. In addition, each applicant for renewal of
party status must state why party status to the special permit is needed
and must submit a certification of understanding of the provisions of
the special permit to which party status is being requested.
(4) The application must include either a certification by the
applicant that the original application, as it may have been updated by
any application for renewal, remains accurate (e.g., all section
references, shipping descriptions, etc.) and complete; or include an
amendment to the previously submitted application as is necessary to
update and ensure the accuracy and completeness of the application, with
certification by the applicant that the application as amended is
accurate and complete.
(5) The application must include a statement describing all relevant
operational, shipping, and incident experience of which the applicant is
aware in connection with the special permit since its issuance or most
recent renewal. If the applicant is aware of no incidents, the applicant
must so certify. When known to the applicant, the statement must
indicate the approximate number of shipments made or packages shipped,
as applicable, and the number of shipments or packages involved in any
loss of contents, including loss by venting other than as authorized in
subchapter C.
(6) When a Class 1 material is forbidden for transportation by
aircraft, except under a special permit (see Columns 9A and 9B in the
table in 49 CFR 172.101), an application to renew a special permit to
transport such Class 1 material on passenger-carrying or cargo-only
aircraft with a maximum certificated takeoff weight of less than 12,500
pounds must certify that no person within the categories listed in 18
U.S.C. 842(i) will participate in the transportation of the Class 1
material.
(7) If the renewal is requested after the expiration date of the
special permit, the following information is required:
(i) The reason the special permit authorization was allowed to
expire;
(ii) A certification statement that no shipments were transported
after the expiration date of the special permit, or a statement
describing any transportation under the terms of the special permit
after the expiration date, if applicable; and
(iii) A statement describing the action(s) the applicant will take
to ensure future renewal is requested before the expiration date.
(8) If no operations or shipments have been made since the issuance
or renewal of the special permit, the applicant must provide specific
justification as to why the special permit should be renewed.
(9) A statement indicating whether the applicant will be acting as a
shipper (offeror), carrier or both under the terms of the special
permit.
(b) If, at least 60 days before an existing special permit expires
the holder files an application for renewal that is complete and
conforms to the requirements of this section, the special permit will
not expire until final administrative action on the application for
renewal has been taken.
[76 FR 462, Jan. 5, 2011, as amended at 76 FR 44501, July 26, 2011; 76
FR 43524, July 20, 2011; 76 FR 56310, Sept. 13, 2011]
Sec. 107.111 Withdrawal.
An application may be withdrawn at any time before a decision to
grant or deny it is made. Withdrawal of an application does not
authorize the removal of any related records from the PHMSA dockets or
files. Applications that are eligible for confidential treatment under
Sec. 105.30 will remain confidential after the application is
withdrawn. The duration of this confidential treatment for trade secrets
and commercial or financial information is indefinite, unless the party
requesting
[[Page 27]]
the confidential treatment of the materials notifies the Associate
Administrator that the confidential treatment is no longer required.
Sec. 107.113 Application processing and evaluation.
(a) The Associate Administrator reviews an application for a special
permit, modification of a special permit, party to a special permit, or
renewal of a special permit in conformance with the standard operating
procedures specified in appendix A of this part (``Standard Operating
Procedures for Special Permits and Approvals'') to determine if it is
complete and conforms with the requirements of this subpart. This
determination will typically be made within 30 days of receipt of the
application for a special permit, modification of a special permit, or
party to a special permit, and typically within 15 days of receipt of an
application for renewal of a special permit. If an application is
determined to be incomplete, the Associate Administrator may reject the
application. If that occurs, PHMSA will inform the applicant of the
deficiency in writing.
(b) An application, that is not a renewal, party to, or emergency
special permit application, and is determined to be complete is
docketed. Notice of the application is published in the Federal
Register, and an opportunity for public comment is provided. All
comments received during the comment period are considered before final
action is taken on the application.
(c) No public hearing or other formal proceeding is required under
this subpart before the disposition of an application. Unless emergency
processing under Sec. 107.117 is requested and granted, applications
are usually processed in the order in which they are filed.
(d) During the processing and evaluation of an application, the
Associate Administrator may conduct an on-site review or request
additional information from the applicant. A failure to cooperate with
an on-site review may result in the application being deemed incomplete
and subsequently being denied. If the applicant does not respond to a
written or electronic request for additional information within 30 days
of the date the request was received, the application may be deemed
incomplete and denied. However, if the applicant responds in writing or
by electronic means within the 30-day period requesting an additional 30
days within which it will gather the requested information, the
Associate Administrator may grant the 30-day extension.
(e) The Associate Administrator may grant or deny an application, in
whole or in part. In the Associate Administrator's discretion, an
application may be granted subject to provisions that are appropriate to
protect health, safety or property. The Associate Administrator may
impose additional provisions not specified in the application or remove
conditions in the application that are unnecessary.
(f) The Associate Administrator may grant an application on finding
that--
(1) The application complies with this subpart;
(2) The application demonstrates that the proposed alternative will
achieve a level of safety that:
(i) Is at least equal to that required by the regulation from which
the special permit is sought, or
(ii) If the regulations do not establish a level of safety, is
consistent with the public interest and adequately will protect against
the risks to life and property inherent in the transportation of
hazardous materials in commerce;
(3) The application states all material facts, and contains no
materially false or materially misleading statement;
(4) The applicant meets the qualifications required by applicable
regulations; and
(5) The applicant is fit to conduct the activity authorized by the
special permit. This assessment may be based on information in the
application, prior compliance history of the applicant, and other
information available to the Associate Administrator.
(g) An applicant is notified in writing or by electronic means
whether the application is granted or denied. A denial contains a brief
statement of reasons.
(h) The initial special permit terminates according to its terms or,
if not otherwise specified, 24 months from the date of issuance. A
subsequent renewal of a special permit terminates according to its terms
or, if not otherwise
[[Page 28]]
specified, 48 months after the date of issuance. A grant of party status
to a special permit, unless otherwise stated, terminates on the date
that the special permit expires.
(i) The Associate Administrator, on determining that an application
concerns a matter of general applicability and future effect and should
be the subject of rulemaking, may initiate rulemaking under part 106 of
this chapter in addition to or instead of acting on the application.
(j) The Associate Administrator publishes in the Federal Register a
list of all special permit grants, denials, and modifications and all
special permit applications withdrawn under this section.
[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 67 FR 61011,
Sept. 27, 2002; 70 FR 73161, Dec. 9, 2005; 76 FR 463, Jan. 5, 2011; 80
FR 54437, Sept. 10, 2015]
Sec. 107.117 Emergency processing.
(a) An application is granted emergency processing if the Associate
Administrator, on the basis of the application and any inquiry
undertaken, finds that--
(1) Emergency processing is necessary to prevent significant injury
to persons or property (other than the hazardous material to be
transported) that could not be prevented if the application were
processed on a routine basis; or
(2) Emergency processing is necessary for immediate national
security purposes or to prevent significant economic loss that could not
be prevented if the application were processed on a routine basis.
(b) Where the significant economic loss is to the applicant, or to a
party in a contractual relationship to the applicant with respect to the
activity to be undertaken, the Associate Administrator may deny
emergency processing if timely application could have been made.
(c) A request for emergency processing on the basis of potential
economic loss must reasonably describe and estimate the potential loss.
(d) An application submitted under this section must conform to
Sec. 107.105 to the extent that the receiving Department official deems
necessary to process the application. An application on an emergency
basis must be submitted to the Department modal contact official for the
initial mode of transportation to be utilized, as follows:
(1) Certificate-Holding Aircraft: The Federal Aviation
Administration Civil Aviation Security Office that serves the place
where the flight will originate or that is responsible for the aircraft
operator's overall aviation security program. The nearest Civil Aviation
Security Office may be located by calling the FAA Duty Officer, 202-267-
3333 (any hour).
(2) Noncertificate-Holding Aircraft (Those Which Operate Under 14
CFR Part 91): The Federal Aviation Administration Civil Aviation
Security Office that serves the place where the flight will originate.
The nearest Civil Aviation Security Office may be located by calling the
FAA Duty Officer, 202-267-3333 (any hour).
(3) Motor Vehicle Transportation: Chief, Hazardous Materials
Division, Federal Motor Carrier Safety Administration, U.S. Department
of Transportation, Washington, DC 20590-0001, 202-385-2400 (day); 1-800-
424-8802 (night).
(4) Rail Transportation: Staff Director, Hazardous Materials
Division, Office of Safety Assurance and Compliance, Federal Railroad
Administration, U.S. Department of Transportation, Washington, DC 20590-
0001, 202-493-6248 or 202-493-6244 (day); 1-800-424-8802 (night).
(5) Water Transportation: Chief, Hazardous Materials Standards
Division, Office of Operating and Environmental Standards, U.S. Coast
Guard, U.S. Department of Homeland Security, Washington, DC 20593-0001;
202-372-1420 (day); 1-800-424-8802 (night).
(e) Upon receipt of all information necessary to process the
application, the receiving Department official transmits to the
Associate Administrator, by the most rapidly available means of
communication, an evaluation as to whether an emergency exists under
Sec. 107.117(a) and, if appropriate, recommendations as to the
conditions to be included in the special permit. The Associate
Administrator will review an application for emergency processing of a
special permit in conformance with the standard operating
[[Page 29]]
procedures specified in appendix A of this part (``Standard Operating
Procedures for Special Permits and Approvals'') to determine if it is
complete and conforms with the requirements of this subpart. If the
Associate Administrator determines that an emergency exists under Sec.
107.117(a) and that, with reference to the criteria of Sec. 107.113(f),
granting of the application is in the public interest, the Associate
Administrator will grant the application subject to such terms as
necessary and immediately notify the applicant. If the Associate
Administrator determines that an emergency does not exist or that
granting of the application is not in the public interest, the applicant
will be notified immediately.
(f) A determination that an emergency does not exist is not subject
to reconsideration under Sec. 107.123 of this part.
(g) Within 90 days following issuance of an emergency special
permit, the Associate Administrator will publish, in the Federal
Register, a notice of issuance with a statement of the basis for the
finding of emergency and the scope and duration of the special permit.
[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 62 FR 51556, Oct.
1, 1997; 64 FR 51914, Sept. 27, 1999; 65 FR 58618, Sept. 29, 2000; 66 FR
45377, Aug. 28, 2001; 67 FR 61011, Sept. 27, 2002; 70 FR 56090, Sept.
23, 2005; 75 FR 53596, Sept. 1, 2010; 76 FR 463, Jan. 5, 2011; 80 FR
54437, Sept. 10, 2015]
Sec. 107.121 Modification, suspension or termination of special permit
or grant of party status.
(a) The Associate Administrator may modify a special permit or grant
of party status on finding that:
(1) Modification is necessary so that the special permit reflects
current statutes and regulations; or
(2) Modification is required by changed circumstances to meet the
standards of Sec. 107.113(f).
(b) The Associate Administrator may modify, suspend or terminate a
special permit or grant of party status, as appropriate, on finding
that:
(1) Because of a change in circumstances, the special permit or
party status no longer is needed or no longer would be granted if
applied for;
(2) The application contained inaccurate or incomplete information,
and the special permit or party status would not have been granted had
the application been accurate and complete;
(3) The application contained deliberately inaccurate or incomplete
information; or
(4) The holder or party knowingly has violated the terms of the
special permit or an applicable requirement of this chapter in a manner
demonstrating the holder or party is not fit to conduct the activity
authorized by the special permit.
(c) Except as provided in paragraph (d) of this section, before a
special permit or grant of party status is modified, suspended, or
terminated, the Associate Administrator notifies the holder or party in
writing or by electronic means of the proposed action and the reasons
for it, and provides an opportunity to show cause why the proposed
action should not be taken.
(1) Within 30 days of receipt of notice of the proposed action, the
holder or party may file a response in writing or by electronic means
that shows cause why the proposed action should not be taken.
(2) After considering the holder's or party's response, or after 30
days have passed without response since receipt of the notice, the
Associate Administrator notifies the holder or party in writing or by
electronic means of the final decision with a brief statement of
reasons.
(d) The Associate Administrator, if necessary to avoid a risk of
significant harm to persons or property, may, in the notification,
declare the proposed action immediately effective.
[76 FR 463, Jan. 5, 2011]
Sec. 107.123 Reconsideration.
(a) An applicant for special permit, a special permit holder, or an
applicant for party status to a special permit may request that the
Associate Administrator reconsider a decision under Sec. 107.113(g),
Sec. 107.117(e) or Sec. 107.121(c) of this part. The request must--
(1) Be in writing or by electronic means and filed within 20 days of
receipt of the decision;
[[Page 30]]
(2) State in detail any alleged errors of fact and law;
(3) Enclose any additional information needed to support the request
to reconsider; and
(4) State in detail the modification of the final decision sought.
(b) The Associate Administrator grants or denies, in whole or in
part, the relief requested and informs the requesting person in writing
or by electronic means of the decision. If necessary to avoid a risk of
significant harm to persons or property, the Associate Administrator
may, in the notification, declare the action immediately effective.
[76 FR 463, Jan. 5, 2011]
Sec. 107.125 Appeal.
(a) A person who requested reconsideration under Sec. 107.123 and
is denied the relief requested may appeal to the Administrator. The
appeal must--
(1) Be in writing or by electronic means and filed within 30 days of
receipt of the Associate Administrator's decision on reconsideration;
(2) state in detail any alleged errors of fact and law;
(2) State in detail any alleged errors of fact and law;
(3) Enclose any additional information needed to support the appeal;
and
(4) State in detail the modification of the final decision sought.
(b) The Administrator, if necessary to avoid a risk of significant
harm to persons or property, may declare the Associate Administrator's
action effective pending a decision on appeal.
(c) The Administrator grants or denies, in whole or in part, the
relief requested and informs the appellant in writing or by electronic
means of the decision. The Administrator's decision is the final
administrative action.
[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 76 FR 463, Jan.
5, 2011]
Sec. 107.127 Availability of documents for public inspection.
(a) Documents related to an application under this subpart,
including the application itself, are available for public inspection,
except as specified in paragraph (b) of this section, at the Office of
the Associate Administrator for Hazardous Materials Safety, Pipeline and
Hazardous Materials Safety Administration, Approvals and Permits
Division, U.S. Department of Transportation, East Building, PHH-30, 1200
New Jersey Avenue, SE., Washington, DC 20590-0001. Office hours are 8:30
a.m. to 5 p.m., Monday through Friday, except Federal holidays when the
office is closed. Copies of available documents may be obtained as
provided in part 7 of this title. Documents numbered 11832 and above may
also be viewed at the website address http://www.regulations.gov.
(b) Documents available for inspection do not include materials
determined to be withheld from public disclosure under Sec. 105.30 and
in accordance with the applicable provisions of section 552(b) of title
5, United States Code, and part 7 of this title.
[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 65 FR 58618,
Sept. 29, 2000; 66 FR 45377, Aug. 28, 2001; 67 FR 61011, Sept. 27, 2002;
70 FR 73162, Dec. 9, 2005; 72 FR 55683, Oct. 1, 2007; 76 FR 56310, Sept.
13, 2011]
Subpart C_Preemption
Sec. 107.201 Purpose and scope.
(a) This subpart prescribes procedures by which:
(1) Any person, including a State, political subdivision, or Indian
tribe, directly affected by a requirement of a State, political
subdivision, or Indian tribe, may apply for a determination as to
whether that requirement is preempted under 49 U.S.C. 5125.
(2) A State, political subdivision, or Indian tribe may apply for a
waiver of preemption with respect to any requirement that the State,
political subdivision, or Indian tribe acknowledges to be preempted by
49 U.S.C. 5125, or that has been determined by a court of competent
jurisdiction to be so preempted.
(b) For purposes of this subpart ``political subdivision'' includes
a municipality; a public agency or other instrumentality of one or more
States, municipalities, or other political subdivisions of a State; or a
public corporation, board, or commission established under the laws of
one or more States.
(c) [Reserved]
[[Page 31]]
(d) An application for a preemption determination that includes an
application for a waiver of preemption will be treated and processed
solely as an application for a preemption determination.
[Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-24, 56
FR 8622, Feb. 28, 1991; Amdt. 107-25, 57 FR 20428, May 13, 1992; Amdt.
107-32, 59 FR 49130, Sept. 26, 1994; Amdt. 107-35, 60 FR 49108, Sept.
21, 1995; Amdt. 107-38, 61 FR 21098, May 9, 1996; 68 FR 52846, Sept. 8,
2003; 71 FR 30067, May 25, 2006]
Sec. 107.202 Standards for determining preemption.
(a) Except as provided in Sec. 107.221 and unless otherwise
authorized by Federal law, any requirement of a State or political
subdivision thereof or an Indian tribe that concerns one of the
following subjects and that is not substantively the same as any
provision of the Federal hazardous materials transportation law, a
regulation issued under the Federal hazardous material transportation
law, or a hazardous material transportation security regulation or
directive issued by the Secretary of Homeland Security that concerns
that subject, is preempted:
(1) The designation, description, and classification of hazardous
material.
(2) The packing, repacking, handling, labeling, marking, and
placarding of hazardous material.
(3) The preparation, execution, and use of shipping documents
pertaining to hazardous material and requirements related to the number,
content, and placement of those documents.
(4) The written notification, recording, and reporting of the
unintentional release in transportation of hazardous material and other
written hazardous materials transportation incident reporting involving
State or local emergency responders in the initial response to the
incident.
(5) The design, manufacturing, fabrication, marking, maintenance,
reconditioning, repairing, or testing of a packaging or a container
which is represented, marked, certified, or sold as qualified for use in
the transportation of hazardous material.
(b) Except as provided in Sec. 107.221 and unless otherwise
authorized by Federal law, any requirement of a State or political
subdivision or Indian tribe is preempted if--
(1) It is not possible to comply with a requirement of the State,
political subdivision, or Indian tribe and a requirement under the
Federal hazardous material transportation law, a regulation issued under
the Federal hazardous material transportation law, or a hazardous
material transportation security regulation or directive issued by the
Secretary of Homeland Security;
(2) The requirement of the State, political subdivision, or Indian
tribe, as applied or enforced, is an obstacle to accomplishing and
carrying out the Federal hazardous material transportation law, a
regulation issued under the Federal hazardous material transportation
law, or a hazardous material transportation security regulation or
directive issued by the Secretary of Homeland Security.
(3) It is preempted under 49 U.S.C. 5125 (c).
(c) A State, political subdivision, or Indian tribe may impose a fee
related to transporting hazardous material only if the fee is fair and
used for a purpose related to transporting hazardous material, including
enforcement and planning, developing and maintaining a capability for
emergency response.
(d) For purposes of this section, ``substantively the same'' means
that the non-Federal requirement conforms in every significant respect
to the Federal requirement. Editorial and other similar de minimis
changes are permitted.
[Amdt. 107-24, 56 FR 8622, Feb. 28, 1991, as amended by Amdt. 107-25, 57
FR 20428, May 13, 1992; Amdt. 107-29, 58 FR 51527, Oct. 1, 1993; Amdt.
107-32, 59 FR 49130, Sept. 26, 1994; Amdt. 107-38, 61 FR 21098, May 9,
1996; Amdt. 107-39, 61 FR 51337, Oct. 1, 1996; 68 FR 52847, Sept. 8,
2003; 77 FR 60939, Oct. 5, 2012]
Preemption Determinations
Sec. 107.203 Application.
(a) With the exception of highway routing matters covered under 49
U.S.C. 5125(c), any person, including a State or political subdivision
thereof or an Indian tribe, directly affected by any requirement of a
State or political subdivision thereof or an Indian tribe, may apply to
the Chief Counsel for a
[[Page 32]]
determination as to whether that requirement is preempted by Sec.
107.202(a), (b), or (c).
(b) Each application filed under this section for a determination
must:
(1) Be submitted to the Chief Counsel:
(i) By mail addressed to the Chief Counsel, Pipeline and Hazardous
Materials Safety Administration, U.S. Department of Transportation, East
Building, PHC-1, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001;
(ii) By facsimile to 202-366-7041; or
(iii) Electronically to the Chief Counsel at
[email protected].
(2) Set forth the text of the State or political subdivision or
Indian tribe requirement for which the determination is sought;
(3) Specify each requirement of the Federal hazardous materials
transportation law, regulations issued under the Federal hazardous
material transportation law, or hazardous material transportation
security regulations or directives issued by the Secretary of Homeland
Security with which the applicant seeks the State or political
subdivision or Indian tribe requirement to be compared;
(4) Explain why the applicant believes the State or political
subdivision or Indian tribe requirement should or should not be
preempted under the standards of Sec. 107.202; and
(5) State how the applicant is affected by the State or political
subdivision or Indian tribe requirement.
(c) The filing of an application for a determination under this
section does not constitute grounds for noncompliance with any
requirement of the Federal hazardous materials transportation law,
regulations issued under the Federal hazardous material transportation
law, or hazardous material transportation security regulations or
directives issued by the Secretary of Homeland Security.
(d) Once the Chief Counsel has published notice in the Federal
Register of an application received under paragraph (a) of this section,
no applicant for such determination may seek relief with respect to the
same or substantially the same issue in any court until final action has
been taken on the application or until 180 days after filing of the
application, whichever occurs first. Nothing in Sec. 107.203(a)
prohibits a State or political subdivision thereof or Indian tribe, or
any other person directly affected by any requirement of a State or
political subdivision thereof or Indian tribe, from seeking a
determination of preemption in any court of competent jurisdiction in
lieu of applying to the Chief Counsel under paragraph (a) of this
section.
[Amdt. 107-24, 56 FR 8622, Feb. 28, 1991, as amended by Amdt. 107-25, 57
FR 20428, May 13, 1992; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt.
107-38, 61 FR 21098, May 9, 1996; 68 FR 52847, Sept. 8, 2003; 71 FR
30067, May 25, 2006; 72 FR 55683, Oct. 1, 2007]
Sec. 107.205 Notice.
(a) If the applicant is other than a State, political subdivision,
or Indian tribe, the applicant shall mail a copy of the application to
the State, political subdivision, or Indian tribe concerned accompanied
by a statement that the State, political subdivision, or Indian tribe
may submit comments regarding the application to the Chief Counsel. The
application filed with the Chief Counsel must include a certification
that the applicant has complied with this paragraph and must include the
names and addresses of each State, political subdivision, or Indian
tribe official to whom a copy of the application was sent.
(b) The Chief Counsel will publish notice of, including an
opportunity to comment on, an application in the Federal Register and
may notify in writing any person readily identifiable as affected by the
outcome of the determination.
(c) Each person submitting written comments to the Chief Counsel
with respect to an application filed under this section must send a copy
of the comments to the applicant and certify to the Chief Counsel that
he or she has complied with this requirement. The Chief Counsel may
notify other persons participating in the proceeding of the comments and
provide an opportunity for those other persons to respond. Late-filed
comments are considered so far as practicable.
[Amdt. 107-38, 61 FR 21098, May 9, 1996, as amended at 71 FR 30067, May
25, 2006]
[[Page 33]]
Sec. 107.207 Processing.
(a) The Chief Counsel may initiate an investigation of any statement
in an application and utilize in his or her evaluation any relevant
facts obtained by that investigation. The Chief Counsel may solicit and
accept submissions from third persons relevant to an application and
will provide the applicant an opportunity to respond to all third person
submissions. In evaluating an application, the Chief Counsel may
consider any other source of information. The Chief Counsel on his or
her own initiative may convene a hearing or conference, if he or she
considers that a hearing or conference will advance his or her
evaluation of the application.
(b) The Chief Counsel may dismiss the application without prejudice
if:
(1) He or she determines that there is insufficient information upon
which to base a determination; or
(2) He or she requests additional information from the applicant and
it is not submitted.
[Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-24, 56
FR 8621, 8622, Feb. 28, 1991; Amdt. 107-38, 61 FR 21098, May 9, 1996; 71
FR 30067, May 25, 2006]
Sec. 107.209 Determination.
(a) Upon consideration of the application and other relevant
information received, the Chief Counsel issues a determination.
(b) The determination includes a written statement setting forth the
relevant facts and the legal basis for the determination, and provides
that any person aggrieved thereby may file a petition for
reconsideration with the Chief Counsel.
(c) The Chief Counsel provides a copy of the determination to the
applicant and to any other person who substantially participated in the
proceeding or requested in comments to the docket to be notified of the
determination. A copy of each determination is placed on file in the
public docket. The Chief Counsel will publish the determination or
notice of the determination in the Federal Register, at which time the
determination becomes a final agency action.
(d) A determination issued under this section constitutes an
administrative determination as to whether a particular requirement of a
State or political subdivision or Indian tribe is preempted under the
Federal hazardous materials transportation law. The fact that a
determination has not been issued under this section with respect to a
particular requirement of a State or political subdivision or Indian
tribe carries no implication as to whether the requirement is preempted
under the Federal hazardous materials transportation law.
[Amdt. 107-24, 56 FR 8623, Feb. 28, 1991, as amended by Amdt. 107-25, 57
FR 20428, May 13, 1992; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt.
107-38, 61 FR 21098, May 9, 1996; 68 FR 52847, Sept. 8, 2003; 71 FR
30067, May 25, 2006]
Sec. 107.211 Petition for reconsideration.
(a) Any person aggrieved by a determination issued under Sec.
107.209 may file a petition for reconsideration. The petition must be
filed with the Chief Counsel, in the same manner specified for filing an
application in Sec. 107.203(b), within 20 days of publication of the
determination in the Federal Register.
(b) The petition must contain a concise statement of the basis for
seeking review, including any specific factual or legal error alleged.
If the petition requests consideration of information that was not
previously made available to the Chief Counsel, the petition must
include the reasons why such information was not previously made
available.
(c) The petitioner shall mail a copy of the petition to each person
who participated, either as an applicant or commenter, in the preemption
determination proceeding, accompanied by a statement that the person may
submit comments concerning the petition to the Chief Counsel within 20
days. The petition filed with the Chief Counsel must contain a
certification that the petitioner has complied with this paragraph and
include the names and addresses of all persons to whom a copy of the
petition was sent. Late-filed comments are considered so far as
practicable.
(d) The Chief Counsel will publish the decision on the petition for
reconsideration or notice of the decision in the Federal Register, at
which time the
[[Page 34]]
decision on the petition for reconsideration becomes a final agency
action.
[Amdt. 107-25, 57 FR 20428, May 13, 1992, as amended by Amdt. 107-38, 61
FR 21099, May 9, 1996; 71 FR 30067, May 25, 2006]
Sec. 107.213 Judicial review.
A party to a proceeding under Sec. 107.203(a) may seek review of a
determination of the Chief Counsel by filing a petition, within 60 days
after the determination becomes final, in the United States Court of
Appeals for the District of Columbia or in the Court of Appeals for the
United States for the circuit in which the person resides or has its
principal place of business.
[71 FR 30068, May 25, 2006]
Waiver of Preemption Determinations
Sec. 107.215 Application.
(a) With the exception of requirements preempted under 49 U.S.C.
5125(c), a State or political subdivision thereof, or Indian tribe may
apply to the Chief Counsel for a waiver of preemption with respect to
any requirement that the State or political subdivision thereof or
Indian tribe acknowledges to be preempted under the Federal hazardous
materials transportation law, or that has been determined by a court of
competent jurisdiction to be so preempted. The Chief Counsel may waive
preemption with respect to such requirement upon a determination that
such requirement--
(1) Affords an equal or greater level of protection to the public
than is afforded by the requirements of the Federal hazardous material
transportation law or the regulations issued thereunder, and
(2) Does not unreasonably burden commerce.
(b) Each application filed under this section for a waiver of
preemption determination must:
(1) Be submitted to the Chief Counsel:
(i) By mail addressed to the Chief Counsel, Pipeline and Hazardous
Materials Safety Administration, U.S. Department of Transportation, East
Building, PHC-1, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001;
(ii) By facsimile to 202-366-7041; or
(iii) Electronically to the Chief Counsel at
[email protected].
(2) Set forth the text of the State or political subdivision
requirement for which the determination is being sought;
(3) Include a copy of any court order and any ruling issued under
Sec. 107.209 having a bearing on the application;
(4) Contain an express acknowledgment by the applicant that the
State, political subdivision, or Indian tribe requirement is preempted
under Federal hazardous materials transportation law, unless it has been
so determined by a court of competent jurisdiction or in a determination
issued under Sec. 107.209;
(5) Specify each requirement of the Federal hazardous materials
transportation law that preempts the State, political subdivision, or
Indian tribe requirement;
(6) State why the applicant believes the State, political
subdivision or Indian tribe requirements affords an equal or greater
level of protection to the public than is afforded by the requirements
of the Federal hazardous material transportation law or the regulations
issued thereunder;
(7) State why the applicant believes the State, political
subdivision or Indian tribe requirement does not unreasonably burden
commerce; and
(8) Specify what steps the State, political subdivision or Indian
tribe is taking to administer and enforce effectively its inconsistent
requirement.
[Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-22, 55
FR 39978, Oct. 1, 1990; Amdt. 107-24, 56 FR 8621, 8623, Feb. 28, 1991;
56 FR 15510, Apr. 17, 1991; Amdt. 107-23, 56 FR 66156, Dec. 20, 1991;
Amdt. 107-25, 57 FR 20428, May 13, 1992; Amdt. 107-32, 59 FR 49131,
Sept. 26, 1994; Amdt. 107-38, 61 FR 21099, May 9, 1996; 68 FR 52847,
Sept. 8, 2003; 71 FR 30068, May 25, 2006; 72 FR 55683, Oct. 1, 2007]
Sec. 107.217 Notice.
(a) The applicant shall mail a copy of the application and any
subsequent amendments or other documents relating to the application to
each person who is reasonably ascertainable by the applicant as a person
who will be affected by the determination sought. The copy of the
application must be accompanied by a statement that the
[[Page 35]]
person may submit comments regarding the application within 45 days. The
application must include a certification that the application has
complied with this paragraph and must include the names and addresses of
each person to whom the application was sent.
(b) Notwithstanding the provisions of paragraph (a) of this section,
if the State or political subdivision determines that compliance with
paragraph (a) of this section would be impracticable, the applicant
shall:
(1) Comply with the requirements of paragraph (a) of this section
with regard to those persons whom it is reasonable and practicable to
notify; and
(2) Include with the application a description of the persons or
class or classes of persons to whom notice was not sent.
(c) The Chief Counsel may require the applicant to provide notice in
addition to that required by paragraphs (a) and (b) of this section, or
may determine that the notice required by paragraph (a) of the section
is not impracticable, or that notice should be published in the Federal
Register. Late-filed comments are considered so far as practicable.
(d) The Chief Counsel may notify any other persons who may be
affected by the outcome of a determination on the application.
(e) Any person submitting written comments with respect to an
application filed under this section shall send a copy of the comments
to the applicant. The person shall certify that he has complied with the
requirements of this paragraph. The Chief Counsel may notify other
persons participating in the proceeding of the comments and provide an
opportunity for those other persons to respond.
[Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-24, 56
FR 8621, Feb. 28, 1991; Amdt. 107-25, 57 FR 20429, May 13, 1992; Amdt.
107-38, 61 FR 21099, May 9, 1996; 71 FR 30068, May 25, 2006]
Sec. 107.219 Processing.
(a) The Chief Counsel may initiate an investigation of any statement
in an application and utilize in his or her evaluation any relevant
facts obtained by that investigation. The Chief Counsel may solicit and
accept submissions from third persons relevant to an application and
will provide the applicant an opportunity to respond to all third person
submissions. In evaluating an application, the Chief Counsel on his or
her own initiative may convene a hearing or conference, if he or she
considers that a hearing or conference will advance his or her
evaluation of the application.
(b) The Chief Counsel may dismiss the application without prejudice
if:
(1) He or she determines that there is insufficient information upon
which to base a determination;
(2) Upon his or her request, additional information is not submitted
by the applicant; or
(3) The applicant fails to provide the notice required by Sec.
107.217.
(c) The Chief Counsel will only consider an application for waiver
of preemption determination if--
(1) The applicant State or political subdivision thereof or Indian
tribe expressly acknowledges in its application that the State or
political subdivision or Indian tribe requirement for which the
determination is sought is inconsistent with the requirements of the
Federal hazardous materials transportation law, regulations issued under
the Federal hazardous material transportation law, or hazardous material
transportation security regulations or directives issued by the
Secretary of Homeland Security.
(2) The State or political subdivision thereof or Indian tribe
requirement has been determined by a court of competent jurisdiction or
in a ruling issued under Sec. 107.209 to be inconsistent with the
requirements of the Federal hazardous materials transportation law,
regulations issued under the Federal hazardous material transportation
law, or hazardous material transportation security regulations or
directives issued by the Secretary of Homeland Security.
(d) When the Chief Counsel has received all substantive information
it considers necessary to process an application for a waiver of
preemption determination, it serves notice of that fact upon the
applicant and all other persons who received notice of the proceeding
pursuant to Sec. 107.217.
[[Page 36]]
(e) To the extent possible, each application for a waiver of
preemption determination will be acted upon in a manner consistent with
the disposition of previous applications for waiver of preemption
determinations.
[Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-24, 56
FR 8621, 8623, Feb. 28, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994;
Amdt. 107-38, 61 FR 21099, May 9, 1996; 65 FR 58618, Sept. 29, 2000; 68
FR 52847, Sept. 8, 2003; 69 FR 54044, Sept. 7, 2004; 71 FR 30068, May
25, 2006]
Sec. 107.221 Determination.
(a) After considering the application and other relevant information
received or obtained during the proceeding, the Chief Counsel issues a
determination.
(b) The Chief Counsel may issue a waiver of preemption only on
finding that the requirement of the State or political subdivision
thereof or Indian tribe affords the public a level of safety at least
equal to that afforded by the requirements of the Federal hazardous
material transportation law or the regulations issued thereunder and
does not unreasonably burden commerce. In determining if the requirement
of the State or political subdivision thereof or Indian tribe
unreasonably burdens commerce, the Chief Counsel considers:
(1) The extent to which increased costs and impairment of efficiency
result from the requirement of the State or political subdivision
thereof or Indian tribe.
(2) Whether the requirement of the State or political subdivision
thereof or Indian tribe has a rational basis.
(3) Whether the requirement of the State or political subdivision
thereof or Indian tribe achieves its stated purpose.
(4) Whether there is need for uniformity with regard to the subject
concerned and if so, whether the requirement of the State or political
subdivision thereof or Indian tribe competes or conflicts with those of
other States or political subdivisions thereof or Indian tribes.
(c) The determination includes a written statement setting forth
relevant facts and legal bases and providing that any person aggrieved
by the determination may file a petition for reconsideration with the
Chief Counsel.
(d) The Chief Counsel provides a copy of the determination to the
applicant and to any other person who substantially participated in the
proceeding or requested in comments to the docket to be notified of the
determination. A copy of the determination is placed on file in the
public docket. The Chief Counsel will publish the determination or
notice of the determination in the Federal Register, at which time the
determination becomes a final agency action.
(e) A determination under this section constitutes an administrative
finding of whether a particular requirement of a State or political
subdivision thereof or Indian tribe is preempted under the Federal
hazardous materials transportation law, or whether preemption is waived.
[Amdt. 107-38, 61 FR 21099, May 9, 1996, as amended at 68 FR 52848,
Sept. 8, 2003; 71 FR 30068, May 25, 2006]
Sec. 107.223 Petition for reconsideration.
(a) Any person aggrieved by a determination under Sec. 107.221 may
file a petition for reconsideration. The petition must be filed with the
Chief Counsel, in the same manner specified for filing an application in
Sec. 107.215(b), within 20 days of publication of the determination in
the Federal Register.
(b) The petition must contain a concise statement of the basis for
seeking review, including any specific factual or legal error alleged.
If the petition requests consideration of information that was not
previously made available to the Chief Counsel, the petition must
include the reasons why such information was not previously made
available.
(c) The petitioner shall mail a copy of the petition to each person
who participated, either as an applicant or commenter, in the waiver of
preemption proceeding, accompanied by a statement that the person may
submit comments concerning the petition to the Chief Counsel within 20
days. The petition filed with the Chief Counsel must contain a
certification that the petitioner has complied with this paragraph and
include the names and addresses of all persons to whom a copy
[[Page 37]]
of the petition was sent. Late-filed comments are considered so far as
practicable.
(d) The Chief Counsel will publish the decision on the petition for
reconsideration or notice of the decision in the Federal Register, at
which time the decision on the petition for reconsideration becomes a
final agency action.
[Amdt. 107-25, 57 FR 20429, May 13, 1992, as amended by Amdt. 107-38, 61
FR 21099, May 9, 1996; 71 FR 30068, May 25, 2006]
Sec. 107.227 Judicial review.
A party to a proceeding under Sec. 107.215(a) may seek review of a
determination of the Chief Counsel by filing a petition, within 60 days
after the determination becomes final, in the United States Court of
Appeals for the District of Columbia or in the Court of Appeals for the
United States for the circuit in which the person resides or has its
principal place of business.
[71 FR 30068, May 25, 2006]
Subpart D_Enforcement
Source: Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, unless otherwise
noted.
Sec. 107.301 Delegated authority for enforcement.
Under redelegation from the Administrator, Pipeline and Hazardous
Materials Safety Administration, the Associate Administrator for
Hazardous Materials Safety and the Office of the Chief Counsel exercise
their authority for enforcement of the Federal hazardous material
transportation law, this subchapter, and subchapter C of this
subchapter, in accordance with Sec. 1.53 of this title.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-24, 56
FR 8621, Feb. 28, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994]
Sec. 107.303 Purpose and scope.
This subchapter describes the various enforcement authorities
exercised by the Associate Administrator for Hazardous Materials Safety
and the Office of Chief Counsel and the associated sanctions and
prescribes the procedures governing the exercise of those authorities
and the imposition of those sanctions.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-15, 51
FR 34986, Oct. 1, 1986; Amdt. 107-24, 56 FR 8621, Feb. 28, 1991]
Sec. 107.305 Investigations.
(a) General. In accordance with its delegated authority under part 1
of this title, the Associate Administrator may initiate investigations
relating to compliance by any person with any provisions of this
subchapter or subchapter C of this chapter, or any special permit,
approval, or order issued thereunder, or any court decree relating
thereto. The Associate Administrator encourages voluntary production of
documents in accordance with and subject to Sec. 105.45, and hearings
may be conducted, and depositions taken pursuant to 49 U.S.C. 5121(a).
The Associate Administrator may conduct investigative conferences and
hearings in the course of any investigation.
(b) Investigations and Inspections. Investigations under 49 U.S.C.
5121(a) are conducted by personnel duly authorized for that purpose by
the Associate Administrator. Inspections under 49 U.S.C. 5121(c) are
conducted by Hazardous Materials Enforcement Specialists or Hazardous
Materials Compliance Investigators, also known as ``hazmat
investigators'' or ``investigators,'' whom the Associate Administrator
has designated for that purpose.
(1) An investigator will, on request, present his or her credentials
for examination, but the credentials may not be reproduced.
(2) An investigator may administer oaths and receive affirmations in
any matter under investigation by the Associate Administrator.
(3) An investigator may gather information by reasonable means
including, but not limited to, interviews, statements, photocopying,
photography, and video- and audio-recording.
(4) With concurrence of the Director, Field Operations, Pipeline and
Hazardous Materials Safety Administration, an investigator may issue a
subpoena for the production of documentary or other tangible evidence
if, on the basis of information available to the investigator, the
documents and
[[Page 38]]
evidence materially will advance a determination of compliance with this
subchapter or subchapter C. Service of a subpoena shall be in accordance
with Sec. 105.50. A person to whom a subpoena is directed may seek
review of the subpoena by applying to the Office of Chief Counsel in
accordance with Sec. 105.55(a). A subpoena issued under this paragraph
may be enforced in accordance with Sec. 105.55(b).
(c) Notification. Any person who is the subject of an Associate
Administrator investigation and who is requested to furnish information
or documentary evidence is notified as to the general purpose for which
the information or evidence is sought.
(d) Termination. When the facts disclosed by an investigation
indicate that further action is unnecessary or unwarranted at that time,
the person being investigated is notified and the investigative file is
closed without prejudice to further investigation by the Associate
Administrator.
(e) Confidentiality. Information received in an investigation under
this section, including the identity of the person investigated and any
other person who provides information during the investigation, shall
remain confidential under the investigatory file exception, or other
appropriate exception, to the public disclosure requirements of 5 U.S.C.
552.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-24, 56
FR 8621, Feb. 28, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt.
107-38, 61 FR 21099, May 9, 1996; 66 FR 45377, Aug. 28, 2001; 67 FR
61011, Sept. 27, 2002; 73 FR 4711, Jan. 28, 2008; 76 FR 56311, Sept. 13,
2011]
Compliance Orders and Civil Penalties
Sec. 107.307 General.
(a) When the Associate Administrator and the Office of Chief Counsel
have reason to believe that a person is knowingly engaging or has
knowingly engaged in conduct which is a violation of the Federal
hazardous material transportation law or any provision of this
subchapter or subchapter C of this chapter, or any exemption, special
permit, or order issued thereunder, for which the Associate
Administrator or the Office of Chief Counsel exercise enforcement
authority, they may--
(1) Issue a warning letter, as provided in Sec. 107.309;
(2) Initiate proceedings to assess a civil penalty, as provided in
either Sec. 107.310 or Sec. 107.311;
(3) Issue an order directing compliance, regardless of whether a
warning letter has been issued or a civil penalty assessed; and
(4) Seek any other remedy available under the Federal hazardous
material transportation law.
(b) In the case of a proceeding initiated for failure to comply with
an exemption or special permit, the allegation of a violation of a term
or condition thereof is considered by the Associate Administrator and
the Office of Chief Counsel to constitute an allegation that the special
permit holder or party to the special permit is failing, or has failed
to comply with the underlying regulations from which relief was granted
by the special permit.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-32, 59
FR 49131, Sept. 26, 1994; Amdt. 107-36, 61 FR 7183, Feb. 26, 1996; 66 FR
45377, Aug. 28, 2001; 70 FR 73162, Dec. 9, 2005]
Sec. 107.309 Warning letters.
(a) The Associate Administrator may issue a warning letter to any
person whom the Associate Administrator believes to have committed a
probable violation of the Federal hazardous material transportation law
or any provision of this subchapter, subchapter C of this chapter, or
any special permit issued thereunder.
(b) A warning letter issued under this section includes:
(1) A statement of the facts upon which the Associate Administrator
bases its determination that the person has committed a probable
violation;
(2) A statement that the recurrence of the probable violations cited
may subject the person to enforcement action; and
(3) An opportunity to respond to the warning letter by submitting
pertinent
[[Page 39]]
information or explanations concerning the probable violations cited
therein.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-15, 51
FR 34986, Oct. 1, 1986; Amdt. 107-24, 56 FR 8621, Feb. 28, 1991; Amdt.
107-32, 59 FR 49131, Sept. 26, 1994; Amdt. 107-36, 61 FR 7183, Feb. 26,
1996; 66 FR 45377, Aug. 28, 2001]
Sec. 107.310 Ticketing.
(a) For an alleged violation that does not have a direct or
substantial impact on safety, the Associate Administrator may issue a
ticket.
(b) The Associate Administrator issues a ticket by mailing it by
certified or registered mail to the person alleged to have committed the
violation. The ticket includes:
(1) A statement of the facts on which the Associate Administrator
bases the conclusion that the person has committed the alleged
violation;
(2) The maximum penalty provided for by statute, the proposed full
penalty determined according to PHMSA's civil penalty guidelines and the
statutory criteria for penalty assessment, and the ticket penalty
amount; and
(3) A statement that within 45 days of receipt of the ticket, the
person must pay the penalty in accordance with paragraph (d) of this
section, make an informal response under Sec. 107.317, or request a
formal administrative hearing under Sec. 107.319.
(c) If the person makes an informal response or requests a formal
administrative hearing, the Associate Administrator forwards the
inspection report, ticket and response to the Office of the Chief
Counsel for processing under Sec. Sec. 107.307-107.339, except that the
Office of the Chief Counsel will not issue a Notice of Probable
Violation under Sec. 107.311. The Office of the Chief Counsel may
impose a civil penalty that does not exceed the proposed full penalty
set forth in the ticket.
(d) Payment of the ticket penalty amount must be made in accordance
with the instructions on the ticket.
(e) If within 45 days of receiving the ticket the person does not
pay the ticket amount, make an informal response, or request a formal
administrative hearing, the person has waived the right to make an
informal response or request a hearing, has admitted the violation and
owes the ticket penalty amount to PHMSA.
[Amdt. 107-36, 61 FR 7183, Feb. 26, 1996, as amended at 66 FR 45377,
Aug. 28, 2001]
Sec. 107.311 Notice of probable violation.
(a) The Office of Chief Counsel may serve a notice of probable
violation on a person alleging the violation of one or more provisions
of the Federal hazardous material transportation law or any provision of
this subchapter or subchapter C of this chapter, or any special permit,
or order issued thereunder.
(b) A notice of probable violation issued under this section
includes the following information:
(1) A citation of the provisions of the Federal hazardous material
transportation law, an order issued thereunder, this subchapter,
subchapter C of this chapter, or the terms of any special permit issued
thereunder which the Office of Chief Counsel believes the respondent is
violating or has violated.
(2) A statement of the factual allegations upon which the demand for
remedial action, a civil penalty, or both, is based.
(3) A statement of the respondent's right to present written or oral
explanations, information, and arguments in answer to the allegations
and in mitigation of the sanction sought in the notice of probable
violation.
(4) A statement of the respondent's right to request a hearing and
the procedures for requesting a hearing.
(5) In addition, in the case of a notice of probable violation
proposing a compliance order, a statement of the proposed actions to be
taken by the respondent to achieve compliance.
(6) In addition, in the case of a notice of probable violation
proposing a civil penalty:
(i) A statement of the maximum civil penalty for which the
respondent may be liable;
(ii) The amount of the preliminary civil penalty being sought by the
Office of Chief Counsel, constitutes the maximum amount the Chief
Counsel may seek throughout the proceeding; and
(iii) A description of the manner in which the respondent makes
payment
[[Page 40]]
of any money due the United States as a result of the proceeding.
(c) The Office of Chief Counsel may amend a notice of probable
violation at any time before issuance of a compliance order or an order
assessing a civil penalty. If the Office of Chief Counsel alleges any
new material facts or seeks new or additional remedial action or an
increase in the amount of the proposed civil penalty, it issues a new
notice of probable violation under this section.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended at 50 FR 45730,
Nov. 1, 1985; Amdt. 107-24, 56 FR 8624, Feb. 28, 1991; Amdt. 107-32, 59
FR 49131, Sept. 26, 1994; Amdt. 107-35, 60 FR 49108, Sept. 21, 1995;
Amdt. 107-36, 61 FR 7184, Feb. 26, 1996]
Sec. 107.313 Reply.
(a) Within 30 days of receipt of a notice of probable violation, the
respondent must either:
(1) Admit the violation under Sec. 107.315;
(2) Make an informal response under Sec. 107.317; or
(3) Request a hearing under Sec. 107.319.
(b) Failure of the respondent to file a reply as provided in this
section constitutes a waiver of the respondent's right to appear and
contest the allegations and authorizes the Chief Counsel, without
further notice to the respondent, to find the facts to be as alleged in
the notice of probable violation and issue an order directing compliance
or assess a civil penalty, or, if proposed in the notice, both. Failure
to request a hearing under paragraph (a)(3) of this section constitutes
a waiver of the respondent's right to a hearing.
(c) Upon the request of the respondent, the Office of Chief Counsel
may, for good cause shown and filed within the 30 days prescribed in the
notice of probable violation, extend the 30-day response period.
Sec. 107.315 Admission of violations.
(a) In responding to a notice of probable violation issued under
Sec. 107.311, the respondent may admit the alleged violations and agree
to accept the terms of a proposed compliance order or to pay the amount
of the preliminarily assessed civil penalty, or, if proposed in the
notice, both.
(b) If the respondent agrees to the terms of a proposed compliance
order, the Chief Counsel issues a final order prescribing the remedial
action to be taken by the respondent.
(c) Payment of a civil penalty, when the amount of the penalty
exceeds $10,000, must be made by wire transfer, through the Federal
Reserve Communications System (Fedwire), to the account of the U.S.
Treasury. Detailed instructions on making payments by wire transfer may
be obtained from the Financial Operations Division (AMZ-120), Federal
Aviation Administration, Mike Monroney Aeronautical Center, P.O. Box
25082, Oklahoma City, OK 73125.
(d) Payment of a civil penalty, when the amount of the penalty is
$10,000 or less, must be made either by wire transfer, as set forth in
paragraph (c) of this section, or certified check or money order payable
to ``U.S. Department of Transportation'' and submitted to the Financial
Operations Division (AMZ-120), Federal Aviation Administration, Mike
Monroney Aeronautical Center, P.O. Box 25082, Oklahoma City, OK 73125.
[Amdt. 107-11, 48 FR 265l, Jan. 20, 1983, as amended by Amdt. 107-23, 57
FR 45453, Oct. 1, 1992; Amdt. 107-29, 58 FR 51527, Oct. 1, 1993; Amdt.
107-38, 61 FR 21100, May 9, 1996; 68 FR 52848, Sept. 8, 2003]
Sec. 107.317 Informal response.
(a) In responding to a notice of probable violation under Sec.
107.311, the respondent may submit to the official who issued the
notice, written explanations, information, or arguments in response to
the allegations, the terms of a proposed compliance order, or the amount
of the preliminarily assessed civil penalty.
(b) The respondent may include in his informal response a request
for a conference. Upon the request of the respondent, the conference may
be either in person or by telephone. A request for a conference must set
forth the issues the respondent will raise at the conference.
(c) Upon receipt of a request for a conference under paragraph (b)
of this section, the Chief Counsel's Office, in consultation with the
Associate Administrator, arranges for a conference
[[Page 41]]
as soon as practicable at a time and place of mutual convenience.
(d) The respondent's written explanations, information, and
arguments as well as the respondent's presentation at a conference are
considered by the Chief Counsel in reviewing the notice of probable
violation. Based upon a review of the proceeding, the Chief Counsel may
dismiss the notice of probable violation in whole or in part. If he does
not dismiss it in whole, he issues an order directing compliance or
assessing a civil penalty, or, if proposed in the notice, both.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-23, 56
FR 66157, Dec. 20, 1991; 66 FR 45377, Aug. 28, 2001]
Sec. 107.319 Request for a hearing.
(a) In responding to a notice of probable violation under Sec.
107.311, the respondent may request a formal administrative hearing on
the record before an Administrative Law Judge (ALJ) obtained by the
Office of the Chief Counsel.
(b) A request for a hearing under paragraph (a) of this section
must:
(1) State the name and address of the respondent and of the person
submitting the request if different from the respondent;
(2) State which allegations of violations, if any, are admitted; and
(3) State generally the issues to be raised by the respondent at the
hearing. Issues not raised in the request are not barred from
presentation at the hearing; and
(4) Be addressed to the official who issued the notice.
(c) After a request for a hearing that complies with the
requirements of paragraph (b) of this section, the Chief Counsel obtains
an ALJ to preside over the hearing and notifies the respondent of this
fact. Upon assignment of an ALJ, further matters in the proceeding
generally are conducted by and through the ALJ, except that the Chief
Counsel and respondent may compromise or settle the case under Sec.
107.327 of this subpart without order of the ALJ or voluntarily dismiss
the case under Rule 41(a)(1) of the Federal Rules of Civil Procedure
without order of the ALJ; in the event of such a compromise, settlement
or dismissal, the Chief Counsel expeditiously will notify the ALJ
thereof.
(d) At any time after requesting a formal administrative hearing but
prior to the issuance of a decision and final order by the ALJ, the
respondent may withdraw such request in writing, thereby terminating the
jurisdication of the ALJ in the case. Such a withdrawal constitutes an
irrevocable waiver of respondent's right to such a hearing on the facts,
allegations, and proposed sanction presented in the notice of probable
violation to which the request for hearing relates.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended at 48 FR 17094,
Apr. 21, 1983; Amdt. 107-19, 54 FR 22899, May 30, 1989]
Sec. 107.321 Hearing.
(a) To the extent practicable, the hearing is held in the general
vicinity of the place where the alleged violation occurred or at a place
convenient to the respondent. Testimony by witnesses shall be given
under oath and the hearing shall be recorded verbatim.
(b) Hearings are conducted in accordance with the Federal Rules of
Evidence and Federal Rules of Civil Procedure; however, the ALJ may
modify them as he determines necessary in the interest of a full
development of the facts. In addition, the ALJ may:
(1) Administer oaths and affirmations;
(2) Issue subpoenas as provided by Sec. 105.45;
(3) Adopt procedures for the submission of motions, evidence, and
other documents pertinent to the proceeding;
(4) Take or cause depositions to be taken;
(5) Rule on offers of proof and receive relevant evidence;
(6) Examine witnesses at the hearing;
(7) Convene, recess, reconvene, adjourn and otherwise regulate the
course of the hearing;
(8) Hold conferences for settlement, simplification of the issues,
or any other proper purpose; and
(9) Take any other action authorized by, or consistent with, the
provisions of this subpart and permitted by law which may expedite the
hearing or aid in the disposition of an issue raised therein.
[[Page 42]]
(c) The official who issued the notice of probable violation, or his
representative, has the burden of proving the facts alleged therein.
(d) The respondent may appear and be heard on his own behalf or
through counsel of his choice. The respondent or his counsel may offer
relevant information including testimony which he believes should be
considered in opposition to the allegations or which may bear on the
sanction being sought and conduct such cross-examination as may be
required for a full disclosure of the facts.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended at 67 FR 61011,
Sept. 27, 2002]
Sec. 107.323 ALJ's decision.
(a) After consideration of all matters of record in the proceeding,
the ALJ shall issue an order dismissing the notice of probable violation
in whole or in part or granting the sanction sought by the Office of
Chief Counsel in the notice. If the ALJ does not dismiss the notice of
probable violation in whole, he issues an order directing compliance or
assessing a civil penalty, or, if proposed in the notice, both. The
order includes a statement of the findings and conclusions, and the
reasons therefore, on all material issues of fact, law, and discretion.
(b) If, within 20 days of receipt of an order issued under paragraph
(a) of this section, the respondent does not submit in writing his
acceptance of the terms of an order directing compliance, or, where
appropriate, pay a civil penalty, or file an appeal under Sec. 107.325,
the case may be referred to the Attorney General with a request that an
action be brought in the appropriate United States District Court to
enforce the terms of a compliance order or collect the civil penalty.
Sec. 107.325 Appeals.
(a) Hearing proceedings. A party aggrieved by an ALJ's decision and
order issued under Sec. 107.323, may file a written appeal in
accordance with paragraph (c) of this section with the Administrator,
Office of the Administrator, Pipeline and Hazardous Materials Safety
Administration, East Building, 1200 New Jersey Avenue, SE., Washington,
DC 20590-0001.
(b) Non-Hearing proceedings. A respondent aggrieved by an order
issued under Sec. 107.317, may file a written appeal in accordance with
paragraph (c) of this section with the Administrator, Office of the
Administrator, Pipeline and Hazardous Materials Safety Administration,
East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.
(c) An appeal of an order issued under this subpart must:
(1) Be filed within 20 days of receipt of the order by the appealing
party; and
(2) State with particularity the findings in the order that the
appealing party challenges, and include all information and arguments
pertinent thereto.
(d) If the Administrator, PHMSA, affirms the order in whole or in
part, the respondent must comply with the terms of the decision within
20 days of the respondent's receipt thereof, or within the time
prescribed in the order. If the respondent does not comply with the
terms of the decision within 20 days of receipt, or within the time
prescribed in the order, the case may be referred to the Attorney
General for action to enforce the terms of the decision.
(e) The filing of an appeal stays the effectiveness of an order
issued under Sec. 107.317 or Sec. 107.323. However, if the
Administrator, PHMSA, determines that it is in the public interest, he
may keep an order directing compliance in force pending appeal.
[70 FR 56090, Sept. 23, 2005, as amended at 72 FR 55683, Oct. 1, 2007]
Sec. 107.327 Compromise and settlement.
(a) At any time before an order issued under Sec. 107.317 or Sec.
107.323 is referred to the Attorney General for enforcement, the
respondent or the Office of Chief Counsel may propose a compromise as
follows:
(1) In civil penalty cases, the respondent or Chief Counsel may
offer to compromise the amount of the penalty by submitting an offer for
a specific amount to the other party. An offer of compromise by the
respondent shall be submitted to the Chief Counsel who
[[Page 43]]
may, after consultation with the Associate Administrator, accept or
reject it.
(i) A compromise offer stays the running of any response period then
outstanding.
(ii) If a compromise is agreed to by the parties, the respondent is
notified in writing. Upon receipt of payment by Office of Chief Counsel,
the respondent is notified in writing that acceptance of payment is in
full satisfaction of the civil penalty proposed or assessed, and Office
of Chief Counsel closes the case with prejudice to the respondent.
(iii) If a compromise cannot be agreed to, the respondent is
notified in writing and is given 10 days or the amount of time remaining
in the then outstanding response period, whichever is longer, to respond
to whatever action was taken by the Office of Chief Counsel or the
Administrator, PHMSA.
(2) In compliance order cases, the respondent may propose a consent
agreement to the Chief Counsel. If the Chief Counsel accepts the
agreement, he issues an order in accordance with its terms. If the Chief
Counsel rejects the agreement, he directs that the proceeding continue.
An agreement submitted to the Chief Counsel must include:
(i) A statement of any allegations of fact which the respondent
challenges;
(ii) The reasons why the terms of a compliance order or proposed
compliance order are or would be too burdensome for the respondent, or
why such terms are not supported by the record in the case;
(iii) A proposed compliance order suitable for issuance by the Chief
Counsel;
(iv) An admission of all jurisdictional facts; and
(v) An express waiver of further procedural steps and all right to
seek judicial review or otherwise challenge or contest the validity of
the order.
(b) Notwithstanding paragraph (a)(1) of this section, the respondent
or Office of Chief Counsel may propose to settle the case. If the Chief
Counsel agrees to a settlement, the respondent is notified and the case
is closed without prejudice to the respondent.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended at 50 FR 45730,
Nov. 1, 1985; Amdt. 107-24, 56 FR 8621, Feb. 28, 1991; 56 FR 15510, Apr.
17, 1991; Amdt. 107-29, 58 FR 51527, Oct. 1, 1993; 66 FR 45377, Aug. 28,
2001]
Sec. 107.329 Maximum penalties.
(a) A person who knowingly violates a requirement of the Federal
hazardous material transportation law, an order issued thereunder, this
subchapter, subchapter C of the chapter, or a special permit or approval
issued under this subchapter applicable to the transportation of
hazardous materials or the causing of them to be transported or shipped
is liable for a civil penalty of not more than $78,376 for each
violation, except the maximum civil penalty is $182,877 if the violation
results in death, serious illness, or severe injury to any person or
substantial destruction of property. There is no minimum civil penalty,
except for a minimum civil penalty of $471 for violations relating to
training. When the violation is a continuing one, each day of the
violation constitutes a separate offense.
(b) A person who knowingly violates a requirement of the Federal
hazardous material transportation law, an order issued thereunder, this
subchapter, subchapter C of the chapter, or a special permit or approval
issued under this subchapter applicable to the design, manufacture,
fabrication, inspection, marking, maintenance, reconditioning, repair or
testing of a package, container, or packaging component which is
represented, marked, certified, or sold by that person as qualified for
use in the transportation of hazardous materials in commerce is liable
for a civil penalty of not more than $78,376 for each violation, except
the maximum civil penalty is $182,877 if the violation results in death,
serious illness, or severe injury to any person or substantial
destruction of property. There is no minimum civil penalty, except for a
minimum civil penalty of $471 for violations relating to training.
[82 FR 18399, Apr. 19, 2017]
[[Page 44]]
Sec. 107.331 Assessment considerations.
After finding a knowing violation under this subpart, the Office of
Chief Counsel assesses a civil penalty taking the following into
account:
(a) The nature and circumstances of the violation;
(b) The extent and gravity of the violation;
(c) The degree of the respondent's culpability;
(d) The respondent's prior violations;
(e) The respondent's ability to pay;
(f) The effect on the respondent's ability to continue in business;
and
(g) Such other matters as justice may require.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-30, 58
FR 50500, Sept. 27, 1993; Amdt. 107-38, 61 FR 21100, May 9, 1996]
Criminal Penalties
Sec. 107.333 Criminal penalties generally.
A person who knowingly violates Sec. 171.2(l) of this title or
willfully or recklessly violates a requirement of the Federal hazardous
material transportation law or a regulation, order, special permit, or
approval issued thereunder shall be fined under title 18, United States
Code, or imprisoned for not more than 5 years, or both, except the
maximum amount of imprisonment shall be 10 years in any case in which
the violation involves the release of a hazardous material which results
in death or bodily injury to any person.
[71 FR 8487, Feb. 17, 2006]
Sec. 107.335 Referral for prosecution.
If the Associate Administrator becomes aware of a possible willful
violation of the Federal hazardous material transportation law, this
subchapter, subchapter C of this chapter, or any special permit, or
order issued thereunder, for which the Associate Administrator exercises
enforcement responsibility, it shall report it to the Office of the
Chief Counsel, Pipeline and Hazardous Materials Safety Administration,
U.S. Department of Transportation, Washington, DC 20590-0001. If
appropriate, the Chief Counsel refers the report to the Department of
Justice for criminal prosecution of the offender.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-22, 55
FR 39978, Oct. 1, 1990; Amdt. 107-24, 56 FR 8621, Feb. 28, 1991; 56 FR
15510, Apr. 17, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt.
107-35, 60 FR 49108, Sept. 21, 1995; 66 FR 45377, Aug. 28, 2001]
Sec. 107.336 Limitation on fines and penalties.
If a State or political subdivision or Indian tribe assesses any
fine or penalty determined by the Secretary to be appropriate for a
violation concerning a subject listed in Sec. 107.202(a), no additional
fine or penalty may be assessed for such violation by any other
authority.
[Amdt. 107-24, 56 FR 8624, Feb. 28, 1991]
Injunctive Action
Sec. 107.337 Injunctions generally.
Whenever it appears to the Office of Chief Counsel that a person has
engaged, or is engaged, or is about to engage in any act or practice
constituting a violation of any provision of the Federal hazardous
material transportation law, this subchapter, subchapter C of this
chapter, or any special permit, or order issued thereunder, for which
the Office of Chief Counsel exercises enforcement responsibility, the
Administrator, PHMSA, or his delegate, may request the Attorney General
to bring an action in the appropriate United States District Court for
such relief as is necessary or appropriate, including mandatory or
prohibitive injunctive relief, interim equitable relief, and punitive
damages as provided by 49 U.S.C. 5122(a).
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-32, 59
FR 49131, Sept. 26, 1994]
Sec. 107.338 Prohibition of hazardous materials operations.
As provided for in subpart E of part 109 of this subchapter, a
person who fails to pay a civil penalty in accordance with agreed upon
installments or in full within prescribed time lines, is prohibited from
conducting hazardous
[[Page 45]]
materials operations and shall immediately cease all hazardous materials
operations.
[79 FR 46199, Aug. 7, 2014]
Sec. 107.339 Imminent hazards.
Whenever it appears to the Office of the Chief Counsel that there is
a substantial likelihood that death, serious illness, or severe personal
injury will result from the transportation of a particular hazardous
material or hazardous materials container, before a compliance order
proceeding or other administrative hearing or formal proceeding to abate
the risk of that harm can be completed, the Administrator, PHMSA, or his
delegate, may bring an action under 49 U.S.C. 5122(b) in the appropriate
United States District Court for an order suspending or restricting the
transporation of that hazardous material or those containers or for such
other equitable relief as is necessary or appropriate to ameliorate the
hazard.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-15, 51
FR 34987, Oct. 1, 1986; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994]
Sec. Appendix A to Subpart D of Part 107--Guidelines for Civil Penalties
I. This appendix sets forth the guidelines PHMSA uses (as of October
2, 2013) in making initial baseline determinations for civil penalties.
The first part of these guidelines is a list of baseline amounts or
ranges for frequently-cited probable violations. Following the list of
violations are general guidelines PHMSA uses in making penalty
determinations in enforcement cases.
II. List of Frequently Cited Violations
------------------------------------------------------------------------
Baseline
Violation description Section or cite assessment
------------------------------------------------------------------------
General Requirements
------------------------------------------------------------------------
A. Registration Requirements: 107.608, 107.612.
Failure to register as an
offeror or carrier of hazardous
material and pay registration
fee:
1. Small business or not-for- .................. $1,200 + $600 each
profit. additional year.
2. All others............... .................. $3,500 + $1,000
each additional
year.
B. Training Requirements:
1. Failure to provide 172.702.
initial training to hazmat
employees (general
awareness, function-
specific, safety, and
security awareness
training):
a. More than 10 hazmat .................. $1,500 for each
employees. area.
b. 10 hazmat employees .................. $1,000 for each
or fewer. area.
2. Failure to provide 172.702........... $1,000 for each
recurrent training to area.
hazmat employees (general
awareness, function-
specific, safety, and
security awareness
training).
3. Failure to provide in- 172.702........... Included in
depth security training penalty for no
when a security plan is security plan.
required but has not been
developed.
4. Failure to provide in- 172.702........... $3,100.
depth security training
when a security plan is
required and has been
developed.
5. Failure to create and 172.704.
maintain training records:.
a. More than 10 hazmat .................. $1,000.
employees.
b. 10 hazmat employees .................. $600.
or fewer.
C. Security Plans:
1. Failure to develop a 172.800...........
security plan; failure to
adhere to security plan:
a. Section 172.504 Table .................. $9,300.
1 materials.
b. Packing Group I...... .................. $7,500.
c. Packing Group II..... .................. $5,600.
d. Packing Group III.... .................. $3,700.
2. Incomplete security plan .................. One-quarter (25
or incomplete adherence percent) of above
(one or more of four for each element.
required elements missing).
3. Failure to update a 172.802(b)........ One-third (33
security plan to reflect percent) of
changing circumstances. baseline for no
plan.
4. Failure to put security 172.800(b)........ One-third (33
plan in writing; failure to percent) of
make all copies identical. baseline for no
plan.
D. Notification to a Foreign 171.22(f).
Shipper: Failure to provide a
foreign offeror or forwarding
agent written information of
HMR requirements applicable to
a shipment of hazardous
materials within the United
States, at the place of entry
into the United States:
1. Packing Group I and Sec. .................. $9,300 .*
172.504 Table 1 materials.
2. Packing Group II......... .................. $5,500 .*
[[Page 46]]
3. Packing Group III........ .................. $1,800 .*
------------------------------------------------------------------------
* The baseline applied to the importer shall be equal to or less than
the baseline applied to the foreign offeror or forwarding agent.
------------------------------------------------------------------------
------------------------------------------------------------------------
Baseline
Violation description Section or cite assessment
------------------------------------------------------------------------
E. Special Permits and
Approvals:
1. Offering or transporting 171.2.
a hazardous material, or
otherwise performing a
function covered by a
special permit or approval,
without authorization:
a. After the special .................. $1,200 + $600 for
permit or approval has each additional
expired. year.
b. After the special .................. $5,000 to $25,000.
permit or approval has
been terminated.
2. Failure to comply with a 171.2.
provision of a special
permit or approval (when no
other baseline is
applicable):
a. That relates to .................. $4,000 and up.
safety.
b. That does not relate .................. $500 and up.
to safety.
3. Failure to maintain a Special Permit.... $1,000.
copy of the special permit
in the transport vehicle or
facility, when required by
the terms of the special
permit.
4. Use an approval or Approval, Various. $9,000.
approval symbol issued to
another person.
------------------------------------------------------------------------
Offeror Requirements--All hazardous materials
------------------------------------------------------------------------
A. Undeclared Shipment:......... 172.200, 172.300,
172.400, 172.500.
1. Offering for
transportation a hazardous
material without shipping
papers, package markings,
labels, and placards (where
required):
a. Packing Group I and .................. $30,000 and up.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $20,000.
c. Packing Group III.... .................. $17,500.
d. Consumer Commodity, .................. $5,000.
ORM-D.
2. Offering for
transportation a hazardous
material that is
misclassified on the
shipping paper, markings,
labels, and placards
(including improper
treatment as consumer
commodity, ORM-D):
a. Packing Group I and .................. $20,000.
Sec. 172.504 Table I
materials.
b. Packing Group II..... .................. $12,000.
c. Packing Group III.... .................. $8,000.
3. Offering for
transportation a forbidden
hazardous material:
a. Packing Group I and .................. $35,000.
Sec. 172.504 Table I
materials.
b. Packing Group II..... .................. $25,000.
c. Packing Group III.... .................. $20,000.
4. Offering for
transportation a lithium
battery, without shipping
papers, package markings,
labels, or placards (when
required):
a. For air transport.... .................. $40,000.
b. For ground transport. .................. $20,000.
B. Shipping Papers:
1. Failure to provide a 172.201,
shipping paper for a 177.817(a).
shipment of hazardous
materials or accepting
hazardous materials for
transportation without a
shipping paper:
a. Packing Group I and .................. $7,500.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $5,600.
c. Packing Group III.... .................. $3,700.
2. Failure to follow one or 172.201(a)(1)..... $1,500.
more of the three approved
formats for listing
hazardous materials and non-
hazardous materials on a
shipping paper.
3. Failure to retain 172.201(e)........ $1,200.
shipping papers as required.
[[Page 47]]
4. Failure to include a 172.202.
proper shipping name in the
shipping description or
using an incorrect proper
shipping name:
a. Packing Group I and .................. $2,000.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $1,500.
c. Packing Group III.... .................. $1,000.
5. Failure to include a 172.202.
hazard class/division
number in the shipping
description:
a. Packing Group I and .................. $2,000.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $1,500.
c. Packing Group III.... .................. $1,000.
6. Failure to include an 172.202.
identification number in
the shipping description:
a. Packing Group I and .................. $2,500.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $1,800.
c. Packing Group III.... .................. $1,200.
7. Using an incorrect hazard 172.202.
class:.
a. That does not affect .................. $1,000.
compatibility
requirements.
b. That affects
compatibility
requirements:
i. Packing Group I .................. $7,500.
and Sec. 172.504
Table 1 materials.
ii. Packing Group II .................. $5,600.
iii. Packing Group .................. $3,700.
III.
8. Using an incorrect 172.202.
identification number:.
a. That does not change .................. $1,000.
the response
information.
b. That changes response
information:
i. Packing Group I .................. $7,500.
and Sec. 172.504
Table 1 materials.
ii. Packing Group II .................. $5,600.
iii. Packing Group .................. $3,700.
III.
9. Failure to include the 172.202.
Packing Group or using an
incorrect Packing Group:
a. Packing Group I and .................. $1,700.
Sec. 172.504 Table 1
materials.
b. Packing Group II and .................. $1,300.
III.
10. Using a shipping 172.202........... $1,000.
description that includes
additional unauthorized
information (extra or
incorrect words).
11. Using a shipping 172.202........... $600.
description not in required
sequence.
12. Failure to include the 172.202........... $600.
total quantity of hazardous
material covered by a
shipping description
(including net explosive
mass).
13. Failure to include any 172.203(a), (b), $600.
of the following on a (c)(2), (k), (l).
shipping paper, as
required: Special permit
number; ``Limited Quantity
or ``Ltd Qty;'' ``RQ'' for
a hazardous substance;
technical name in
parentheses for a listed
generic or ``n.o.s.''
material; or marine
pollutant.
14. Failure to indicate 172.203(m)........ $2,500.
poison inhalation hazard on
a shipping paper.
15. Failure to include or 172.204........... $1,000.
sign the required shipper's
certification on a shipping
paper.
C. Emergency Response
Information Requirements:
1. Providing incorrect 172.602.
emergency response
information with or on a
shipping paper:
a. No significant .................. $1,000.
difference in response.
b. Significant
difference in response:
i. Packing Group I .................. $7,500.
and Sec. 172.504
Table 1 materials.
ii. Packing Group II .................. $5,600.
iii. Packing Group .................. $3,700.
III.
[[Page 48]]
2. Failure to include an 172.604........... $3,200.
emergency response
telephone number on a
shipping paper.
3. Failure to have the 172.604........... $1,600.
emergency response
telephone number monitored
while a hazardous material
is in transportation; or
listing the number in a
manner that it is not
readily identifiable or
cannot be found easily and
quickly (e.g., multiple
telephone numbers); or
failing to include the
name, contract number, or
other unique identifier of
the person registered with
the emergency response
provider.
4. Listing an emergency 172.604........... $3,200 to $5,200
response telephone number
on a shipping paper that
causes emergency responders
delay in obtaining
emergency response
information (e.g., listing
a telephone number that not
working, incorrect, or
otherwise not capable of
providing required
information).
D. Package Marking Requirements:
1. Failure to mark the 172.301(a).
proper shipping name and
identification number on a
package:
a. Packing Group I and .................. $6,000.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $4,500.
c. Packing Group III.... .................. $3,000.
2. Marking a package with an 172.301(a).
incorrect shipping name and
identification number:
a. That does not change
the response
information:
i. Packing Group I .................. $3,700.
and Sec. 172.504
Table 1 materials.
ii. Packing Group II .................. $2,700.
iii. Packing Group .................. $2,200.
III.
b. That changes the
response information:
i. Packing Group I .................. $9,500.
and Sec. 172.504
Table 1 materials.
ii. Packing Group II .................. $7,100.
iii. Packing Group .................. $4,700.
III.
3. Failure to mark the 172.301(a).
proper shipping name on a
package or marking an
incorrect shipping name on
a package:
a. Packing Group I and .................. $2,000.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $1,500.
c. Packing Group III.... .................. $1,000.
4. Failure to mark the 172.301(a).
identification number on a
package:.
a. Packing Group I and .................. $2,500.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $1,800.
c. Packing Group III.... .................. $1,200.
5. Marking a package with an 172.301(a).
incorrect identification
number:.
a. That does not change .................. $1,000.
the response
information.
b. That changes the
response information:
i. Packing Group I .................. $7,500.
and Sec. 172.504
Table 1 materials.
ii. Packing Group II .................. $5,600.
iii. Packing Group .................. $3,700.
III.
6. Failure to include the 172.301(c)........ $600.
required technical name(s)
in parentheses for a listed
generic or ``n.o.s.'' entry.
7. Failure to mark ``non- 172.301(f)........ $2,000.
odorized'' on a cylinder
containing liquefied
petroleum gas.
8. Marking a package as 172.303(a)........ $1,000.
containing hazardous
material when it contains
no hazardous material.
9. Failure to locate 172.304(a)(4)..... $1,000.
required markings away from
other markings that could
reduce their effectiveness.
10. Failure to mark a 172.312.
package containing liquid
hazardous materials with
required orientation
markings:
a. Packing Group I and .................. $4,000.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $3,500.
[[Page 49]]
c. Packing Group III.... .................. $3,000.
11. Failure to mark 172.313(a), $4,000.
``Biohazard on an 172.323.
infectious substance or
``Inhalation Hazard'' on a
package containing a poison
by inhalation hazard.
12. Failure to apply limited 172.315, $600.
quantity marking or ``RQ'' 172.324(b).
marking on a non-bulk
package containing a
hazardous substance.
13. Listing the technical 172.301(b)........ $1,600.
name of a select agent
hazardous material when it
should not be listed.
14. Failure to apply a 172.317, 172.322, $1,200.
``Keep away from heat,'' 172.325.
marine pollutant, or
elevated temperature
(``HOT'') marking.
15. Failure to properly mark 172.331, 172.334, $1,000.
a bulk container. 172.336, 172.338.
E. Package Labeling
Requirements:
1. Failure to label a 172.400........... $7,000.
package or applying a label
that represents a hazard
other than the hazard
presented by the hazardous
material in the package.
2. Placing a label on a 172.401(a)........ $1,000.
package that does not
contain a hazardous
material.
3. Failure to place a 172.402.
required subsidiary label
on a package:.
a. Packing Group I and .................. $3,100.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $1,800.
c. Packing Group III.... .................. $600.
4. Placing a label on a 172.406(a)........ $1,000.
different surface of the
package than, or away from,
the proper shipping name.
5. Placing an improper size 172.407(c)........ $1,000.
label on a package.
6. Placing a label on a 172.407(d)........ $1,000.
package that does not meet
color specification
requirements (depending on
the variance).
7. Failure to place a Cargo 172.402(c)........ $5,000.
Aircraft Only label on a
package intended for air
transportation, when
required.
8. Failure to place a Cargo 172.402(c),
Aircraft Only label on a 172.102(c)(1)
package containing a Special Provision
primary lithium battery or 188, 189, 190.
failure to mark a package
containing a primary
lithium battery as
forbidden for transport on
passenger aircraft:
a. For air transport.... .................. $10,000.
b. For ground transport. .................. $1,000.
9. Failure to provide an 172.411........... $3,100.
appropriate class or
division number on an
explosive label.
F. Placarding Requirements:
1. Improperly placarding a 172.504.
freight container or
vehicle containing
hazardous materials:
a. Packing Group I and .................. $1,200 to $11,200.
Sec. 172.504 Table 1
materials.
b. Packing Group II and .................. $1,000 to $9,000.
III.
2. Failure to placard a 172.504.
freight container or
vehicle containing
hazardous materials (no
placard at all):
a. Packing Group I and .................. $12,000.
Sec. 172.504 Table 1
materials.
b. Packing Group II and .................. $8,500.
III.
G. Packaging Requirements:
1. Failure to comply with 173.4, 173.4a, $1,000 to $5,000.
package testing 173.4b, 173.6,
requirements for small 173.156, 173.306.
quantities, excepted
quantities, de minimis,
materials of trade, limited
quantities, and ORM-D.
2. Offering a hazardous Various.
material for transportation
in an unauthorized non-UN
standard or non-
specification packaging
(includes failure to comply
with the terms of a special
permit authorizing use of a
non-standard or non-
specification packaging):
a. Packing Group I, Sec. .................. $11,200.
172.504 Table 1
materials, and Division
2.3 gases.
b. Packing Group II and .................. $8,700.
Divisions 2.1 and 2.2
gases.
c. Packing Group III.... .................. $6,200.
3. Offering a hazardous Various.
material for transportation
in a package that was not
retested as required:
a. Packing Group I and .................. $8,000.
Sec. 172.504 Table 1
materials.
[[Page 50]]
b. Packing Group II..... .................. $5,000.
c. Packing Group III.... .................. $3,000.
4. Offering a hazardous Various.
material for transportation
in an improper package:
a. When Packing Group I .................. $8,000.
material is packaged in
a Packing Group III
package.
b. When Packing Group I .................. $5,000.
material is packaged in
a Packing Group II
package.
c. When Packing Group II .................. $3,000.
material is packaged in
a Packing Group III
package.
5. Offering a hazardous Various........... $7,500.
material for transportation
in a packaging (including a
packaging manufactured
outside the United States)
that is torn, damaged, has
hazardous material present
on the outside of the
package, or is otherwise
not suitable for shipment.
6. Offering a hazardous 178.601, Various.
material for transportation
in a self-certified
packaging that has not been
subjected to design
qualification testing:
a. Packing Group I and .................. $13,500.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $10,500.
c. Packing Group III.... .................. $7,500.
7. Offering a hazardous 173.32(d), $4,500.
material for transportation 173.24(c).
in a packaging that has
been successfully tested to
an applicable UN standard
but is not marked with the
required UN marking
(including missing
specification plates).
8. Failure to close a UN 173.22(a)(4).
standard packaging in
accordance with the closure
instructions:
a. Packing Group I and .................. $2,000 to $5,000.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $1,000 to $4,000.
c. Packing Group III.... .................. $500 to $3,000.
9. Offering a hazardous 173.24(b).
material for transportation
in a packaging that leaks
during conditions normally
incident to transportation:
a. Packing Group I and .................. $16,500.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $11,200.
c. Packing Group III.... .................. $7,500.
10. Overfilling or 173.24(b).
underfilling a package so
that the effectiveness is
substantially reduced:
a. Packing Group I and .................. $11,200.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $7,500.
c. Packing Group III.... .................. $3,700.
11. Failure to ensure 173.24(e)......... $9,000 to $12,000.
packaging is compatible
with hazardous material
lading.
12. Failure to mark an 173.25(a)(4)...... $3,700.
overpack as required.
13. Packaging incompatible 173.25(a)(5)...... $9,300.
materials in an overpack.
14. Marking a package 173.25(a).
``overpack'' when the inner
packages do not meet the
requirements of the HMR:
a. Packing Group I and .................. $15,000.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $10,000.
c. Packing Group III.... .................. $7,000.
15. Failure to comply with 173.27............ $1,000 to $10,000.
additional requirements for
transportation by aircraft.
16. Filling an IBC, portable 173.32(a),
tank, or cargo tank (DOT, 173.33(a)(3),
UN, or IM) that is out of 180.352, 180.407,
test and offering hazardous 180.605.
materials for
transportation in that IBC
or portable tank. (Penalty
amount depends on number of
units and time out of
test.).
a. Packing Group I and
Sec. 172.504 Table 1
materials:
i. All testing .................. $8,700.
overdue.
ii. Only periodic (5 .................. $4,600.
year) tests overdue
or only
intermediate
periodic (2.5 year)
tests overdue.
b. Packing Group II:
i. All testing .................. $6,600.
overdue.
[[Page 51]]
ii. Only periodic (5 .................. $3,300.
year) tests overdue
or only
intermediate
periodic (2.5 year)
tests overdue.
c. Packing Group III:
i. All testing .................. $4,600.
overdue.
ii. Only periodic (5 .................. $2,300.
year) tests overdue
or only
intermediate
periodic (2.5 year)
tests overdue.
17. Manifolding cylinders 173.301(g)........ $3,700 and up.
without conforming to
manifolding requirements.
18. Failure to ensure a 173.315(n)(3)..... $2,500.
cargo tank motor vehicle in
metered delivery service
has an operational off-
truck remote shut-off
activation device.
19. Offering a hazardous 173.33............ $15,000.
material in a cargo tank
motor vehicle when the
material does not meet
compatibility requirements
with the tank or other
lading or residue.
20. Failure to provide the 173.32(f)(6).
required outage in a
portable tank that results
in a release of hazardous
materials:.
a. Packing Group I and .................. $15,000.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $11,200.
c. Packing Group III.... .................. $7,500.
------------------------------------------------------------------------
Offeror Requirements--Specific hazardous materials
------------------------------------------------------------------------
A. Cigarette Lighters:
1. Offering for 173.21(i)......... $7,500.
transportation an
unapproved cigarette
lighter, lighter refill, or
similar device, equipped
with an ignition element
and containing fuel.
2. Failure to include the 173.308(d)(1)..... $1,000.
cigarette lighter test
report identifier on the
shipping paper.
3. Failure to mark the 173.308(d)(2)..... $1,000.
approval number on the
package..
B. Class 1--Explosives:
1. Failure to mark the 172.320........... $1,000.
package with the EX number
for each substance
contained in the package
or, alternatively, indicate
the EX number for each
substance in association
with the description on the
shipping description.
2. Offering an unapproved 173.54, 173.56(b).
explosive for
transportation:.
a. Division 1.4 .................. $5,000.
fireworks meeting the
chemistry requirements
of APA Standard 87-1.
b. Division 1.3 .................. $7,500.
fireworks meeting the
chemistry requirements
of APA Standard 87-1.
c. All other explosives .................. $12,500 and up.
(including forbidden).
3. Offering an unapproved 173.54, 173.56(b).
explosive for
transportation that
minimally deviates from an
approved design in a manner
that does not impact
safety:
a. Division 1.4......... .................. $3,000.
b. Division 1.3......... .................. $4,000.
c. All other explosives. .................. $6,000.
4. Offering a leaking or 173.54(c).
damaged package of
explosives for
transportation:
a. Division 1.3 and 1.4. .................. $12,500.
b. All other explosives. .................. $16,500.
5. Offering a Class 1 173.60(b)(5)...... $15,000.
material that is fitted
with its own means of
ignition or initiation,
without providing
protection from accidental
actuation.
6. Packaging explosives in 173.61............ $9,300.
the same outer packaging
with other materials.
7. Transporting a detonator 177.835(g)(3)..... $10,000.
on the same vehicle as
incompatible materials
using the approved method
listed in 177.835(g)(3)
without meeting the
requirements of IME
Standard 22.
C. Class 7--Radioactive
Materials:
1. Failure to include 172.203(d)........ $2,000 to $5,000.
required additional entries
for radioactive material on
a shipping paper, or
providing incorrect
information for these
additional entries.
2. Failure to mark the gross 172.310(a)........ $1,000.
mass on the outside of a
package of Class 7 material
that exceeds 110 pounds.
[[Page 52]]
3. Failure to mark each 172.310(b)........ $3,700.
package with the words
``Type A'' or ``Type B,''
as appropriate.
4. Placing a label on Class 172.403........... $6,200.
7 material that understates
the proper label category.
5. Placing a label on Class 172.403(g)........ $2,000 to $5,000.
7 material that fails to
contain (or has erroneous)
entries for the name of the
radionuclide(s), activity,
and transport index.
6. Failure to meet one or 173.410........... $6,200.
more of the general design
requirements for a package
used to ship a Class 7
material.
7. Failure to comply with 173.411........... $6,200.
the industrial packaging
(IP) requirements when
offering a Class 7 material
for transportation.
8. Failure to provide a 173.412(a)........ $5,000.
tamper-indicating device on
a Type A package used to
ship a Class 7 material.
9. Failure to meet the 173.412(b)-(i).... $6,200.
additional design
requirements of a Type A
package used to ship a
Class 7 material.
10. Failure to meet the 173.412(j)-(l).... $11,200.
performance requirements
for a Type A package used
to ship a Class 7 material.
11. Offering a DOT 173.415(a),
specification 7A packaging 173.461.
without maintaining
complete documentation of
tests and an engineering
evaluation or comparative
data:
a. Tests and evaluation .................. $13,500.
not performed.
b. Test performed but .................. $2,500 to $6,200.
complete records not
maintained.
12. Offering any Type B, 173.416........... $16,500.
Type B(U), or Type B(M)
packaging that failed to
meet the approved DOT, NRC
or DOE design, as
applicable.
13. Offering a Type B 173.471(a).
packaging without
registering as a party to
the NRC approval
certificate:
a. Never obtained .................. $3,700.
approval.
b. Holding an expired .................. $1,200.
certificate.
14. Failure to meet one or 173.420........... $13,500.
more of the special
requirements for a package
used to ship more than 0.1
kg of uranium hexafluoride.
15. Offering Class 7 173.421(a)........ $8,000.
materials for
transportation as a limited
quantity without meeting
the requirements for a
limited quantity.
16. Offering a multiple- 173.423(a)........ $600 to $3,100.
hazard limited quantity
Class 7 material without
addressing the additional
hazard.
17. Offering Class 7 173.424........... $6,200 to $12,500.
materials for
transportation under
exceptions for radioactive
instruments and articles
while failing to meet the
applicable requirements.
18. Offering Class 7 low 173.427........... $7,500 to $12,500.
specific activity (LSA)
materials or surface
contaminated objects (SCO)
while failing to comply
with applicable transport
requirements (including, an
external dose rate that
exceeds an external
radiation level of 10 mSv/h
at 3 meters from the
unshielded material).
19. Offering Class 7 LSA 173.427(a)(6)..... $1,200.
materials or SCO as
exclusive use without
providing specific
instructions to the carrier
for maintenance of
exclusive use shipment
controls.
20. Offering in excess of a 173.431........... $15,000.
Type A quantity of a Class
7 material in a Type A
packaging.
21. Offering a package that 173.441........... $12,500.
exceeds the permitted
radiation level or
transport index.
22. Offering a package 173.443........... $6,200 and up.
without determining the
level of removable external
contamination, or that
exceeds the limit for
removable external
contamination.
23. Storing packages of 173.447(a)........ $6,200 and up.
radioactive material in a
group with a total
criticality safety index of
more than 50.
24. Offering for 173.448(e)........ $6,200 and up.
transportation or
transporting aboard a
passenger aircraft any
single package or overpack
of Class 7 material with a
transport index greater
than 3.0.
[[Page 53]]
25. Exporting a Type B, Type 173.471(d)........ $3,700.
B(U), Type B(M), or fissile
package without obtaining a
U.S. Competent Authority
Certificate or, after
obtaining a U.S. Competent
Authority Certificate,
failing to submit a copy to
the national competent
authority of each country
into or through which the
package is transported.
26. Offering or exporting 173.476(a), (b)... $3,700.
special form radioactive
materials without
maintaining a complete
safety analysis or
Certificate of Competent
Authority, as required.
27. Shipping a fissile 173.417, 173.453, $12,500.
material as fissile-exempt 173.457.
without meeting one of the
exemption requirements or
otherwise not complying
with fissile material
requirements.
28. Offering Class 7 fissile 173.417........... $1,000 to $12,500.
materials while failing to
have a DOT Competent
Authority Certificate or
NRC Certificate of
Compliance, as required, or
failing to meet the
requirements of the
applicable Certificate.
D. Class 2--Compressed Gases in
Cylinders:
1. Filling and offering a 173.301(a)(6),
cylinder with compressed (a)(7).
gas when the cylinder is
out of test or after its
authorized service life:
a. Table 1 and .................. $10,000 to
compressed gas in $15,000.
solution.
b. Division 2.1 gases... .................. $7,500 to $10,000.
c. Division 2.2 gases... .................. $5,000 to $7,500.
2. Overfilling cylinders:... Various.
a. Division 2.3 gases... .................. $15,000.
b. Division 2.1 gases... .................. $10,000.
c. Division 2.2 gases... .................. $7,500.
d. Aerosols, limited .................. $5,000.
quantities, consumer
commodities.
3. Failure to check each day 173.303(d)........ $6,200.
the pressure of a cylinder
charged with acetylene that
is representative of that
day's compression, after
the cylinder has cooled to
a settled temperature, or
failure to keep a record of
this test for 30 days.
4. Offering a limited 173.306(a)(3)..... $1,800 to $5,000.
quantity of a compressed
gas in a metal container
for the purpose of
propelling a nonpoisonous
material and failure to
heat the cylinder until the
pressure is equivalent to
the equilibrium pressure at
131 [deg]F, without
evidence of leakage,
distortion, or other defect.
5. Offering a limited 173.306(a)(3)(v).. $5,000.
quantity of a compressed
gas in a metal container
intended to expel a non-
poisonous material, while
failing to subject the
filled container to a hot
water bath, as required.
6. Offering liquefied 173.315(j)........ $7,500 to $10,000.
petroleum gas for permanent
installation on consumer
premises when the
requirements are not met.
E. Oxygen Generators Offered by
Air:
1. Offering an unapproved 173.168........... $25,000.
oxygen generator for
transportation.
2. Offering an oxygen 173.168........... $12,500 to
generator for $25,000.
transportation without
installing a means of
preventing actuation, as
required.
3. Offering an oxygen 172.102(c)(1) $35,000.
generator as spent when the Special Provision
ignition and chemical 61.
contents were still present.
F. Batteries: 173.159, 173.185,
173.21(c).
1. Offering lithium
batteries in transportation
that have not been tested:
a. Ground transport..... .................. $15,000.
b. Air transport........ .................. $30,000.
2. Offering lithium .................. $5,000 + 25
batteries in transportation percent increase
that have been assembled for each
from tested cells, but have additional
not been tested. design.
3. Failure to create records .................. $2,500 to $9,300.
of design testing.
4. Offering lithium .................. $15,000.
batteries in transportation
that have not been
protected against short
circuit.
5. Offering lithium .................. $12,500.
batteries in transportation
in unauthorized packages.
6. Offering lead acid .................. $10,000.
batteries in transportation
in unauthorized packages.
[[Page 54]]
7. Offering lithium .................. $30,000.
batteries in transportation
on passenger aircraft or
misclassifying them for air
transport.
8. Failure to prepare .................. $6,000.
batteries so as to prevent
damage in transit.
------------------------------------------------------------------------
Manufacturing, Reconditioning, Retesting Requirements
------------------------------------------------------------------------
A. Activities Subject to
Approval:
1. Failure to report in 171.2(c), Approval $700 to $1,500.
writing a change in name, Letter.
address, ownership, test
equipment, management, or
test personnel.
2. Failure by an independent 178.35(c)(1), (2), $5,000 to $16,500.
inspection agency of (3).
specification cylinders to
satisfy all inspector
duties, including
inspecting materials, and
verifying materials of
construction and cylinders
comply with applicable
specifications.
3. Failure to properly 178.25(c)(4), $4,000.
complete or retain Various.
inspector's report for
specification packages.
4. Failure to have a Various........... $2,500.
cylinder manufacturing
registration number/symbol,
when required.
B. Packaging Manufacturers
(General):
1. Failure of a manufacturer 178.2(c).......... $3,100.
or distributor to notify
each person to whom the
packaging is transferred of
all the requirements not
met at the time of
transfer, including closure
instructions.
2. Failure to comply with 178.504 to
specified construction 178.523.
requirements for non-bulk
packagings:
a. Packing Group I and .................. $12,000.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $8,000.
c. Packing Group III.... .................. $4,000.
3. Fail testing: Failure to 178.601(b),
ensure a packaging 178.609, part 178
certified as meeting the UN subparts O, Q.
standard is capable of
passing the required
performance testing
(depending on size of
package):
a. Infectious substances .................. $16,500.
b. Packing Group I and .................. $13,500 to
Sec. 172.504 Table 1 $16,500.
materials.
c. Packing Group II..... .................. $10,500 to
$13,500.
d. Packing Group III.... .................. $7,500 to $10,500.
4. No testing: Certifying a 178.601(d),
packaging as meeting a UN 178.609, part 178
standard when design subparts O, Q.
qualification testing was
not performed (depending on
size of package):
a. Infectious substances .................. $16,500.
a. Packing Group I and .................. $13,500 to
Sec. 172.504 table 1 $16,500.
materials.
b. Packing Group II..... .................. $10,500 to
$13,500.
c. Packing Group III.... .................. $7,500 to $10,500.
5. Failure to conduct 178.601(e), part $2,500 to $16,500.
periodic testing on UN 178 subparts O, Q.
standard packaging
(depending on length of
time, Packing Group, and
size of package).
6. Improper testing: Failure
to properly conduct testing
for UN standard packaging
(e.g., testing with less
weight than marked on
packaging; drop testing
from lesser height than
required; failing to
condition fiberboard boxes
before design test)
(depending on size of
package):
a. Design qualification 178.601(d),
testing:. 178.609, part 178
subparts O, Q.
i. Infectious .................. $13,500.
substances.
ii. Packing Group I. .................. $10,500 to
$13,500.
iii. Packing Group .................. $7,500 to $10,500.
II.
iv. Packing Group .................. $2,500 to $7,500.
III.
b. Periodic testing:.... 178.601(e),
178.609.
i. Infectious .................. $10,500.
substances.
ii. Packing Group I. .................. $7,000 to $10,500.
iii. Packing Group .................. $4,000 to $7,000.
II.
iv. Packing Group .................. $600 to $4,000.
III.
7. Failure to keep complete 178.601(l).
and accurate testing
records:.
a. No records kept...... .................. $5,000.
b. Incomplete or .................. $1,200 to $3,700.
inaccurate records.
8. Improper marking of UN 178.503........... $600 per item.
certification.
[[Page 55]]
C. Drum Manufacturers &
Reconditioners:
1. Failure to properly 178.604(b), (d),
conduct a production 173.28(b)(2)(i).
leakproofness test on a new
or reconditioned drum:
a. Improper testing:
i. Packing Group I.. .................. $3,000.
ii. Packing Group II .................. $2,500.
iii. Packing Group .................. $2,000.
III.
b. No testing performed:
i. Packing Group I.. .................. $6,200.
ii. Packing Group II .................. $5,000.
iii. Packing Group .................. $3,700.
III.
2. Marking incorrect tester 173.28(b)(2)(ii).
information on a reused
drum:.
a. Incorrect information .................. $1,000.
b. Unauthorized use of .................. $9,000.
another's information.
3. Representing, marking, or 173.28(c)......... $7,500 to $13,500.
certifying a drum as a
reconditioned UN standard
packaging when the drum
does not meet a UN
standard..
4. Representing, marking, or 173.28(d)......... $600
certifying a drum as
altered from one UN
standard to another, when
the drum has not been
altered.
D. IBC and Portable Tank
Requalification:
1. Failure to properly test 180.352, 180.603.
and inspect IBCs or
portable tanks.
a. Packing Group I...... .................. $10,000.
b. Packing Group II..... .................. $7,500.
c. Packing Group III.... .................. $5,000.
2. Failure to properly mark 180.352(e), $600 per item.
an IBC or portable tank 178.703(b),
with the most current 180.605(k).
retest and/or inspection
information.
3. Failure to keep complete 180.352(f),
and accurate records of IBC 180.605(l).
or portable tank retest and
reinspection:
a. No records kept...... .................. $5,000.
b. Incomplete or .................. $1,200 to $3,700.
inaccurate records.
4. Failure to make 180.352(g), 49 $1,200.
inspection and test records U.S.C. 5121(b)(2).
available to a DOT
representative upon request.
5. Failure to perform tests 180.352(d)........ $3,700 to $6,200.
(internal visual,
leakproofness) on an IBC as
part of a repair.
6. Failure to perform 180.350(c)........ $2,500.
routine maintenance on an
IBC.
E. Cylinder Manufacturers &
Rebuilders:
1. Manufacturing, 178.35............ $10,000 to
representing, marking, $25,000.
certifying, or selling a
DOT high-pressure cylinder
that was not inspected and
verified by an approved
independent inspection
agency.
2. Failure to mark a 178.35, Various... $1,000.
registration number/symbol
on a cylinder, when
required.
3. Failure to mark the date 178.65(i)......... $3,700.
of manufacture or lot
number on a DOT-39 cylinder.
4. Failure to have a 107.807, 178.35... $6,200.
chemical analysis performed
in the U.S. for a material
manufactured outside the
U.S., without an approval.
5. Failure to comply with 178.35(d), (e), $5,000.
defect and attachment (f).
requirements, safety device
requirements, or marking
requirements.
6. Failure to meet wall Various........... $9,300 to $18,700.
thickness requirements.
7. Failure to heat treat Various........... $6,200 to $18,700.
cylinders prior to testing.
8. Failure to conduct a Various........... $3,100 to $7,700.
complete visual internal
examination.
9. Failure to conduct a Various........... $3,100 to $7,700.
hydrostatic test, or
conducting a hydrostatic
test with inaccurate test
equipment.
10. Failure to conduct a Various........... $9,300 to $18,700.
flattening test.
11. Failure to conduct a 178.33-8, 178.33a- $6,200 to $18,700.
burst test on a DOT-2P, 2Q, 8, 178.33b-8,
2S, or 39 cylinder. 178.65(f)(2).
12. Failure to maintain 178.35, Various.
required inspector's
reports:.
a. No reports at all.... .................. $5,000.
b. Incomplete or .................. $1,200 to $3,700.
inaccurate reports.
13. Failure to complete or 178.35(g)......... $6,200.
retain manufacturer's
reports.
14. Representing a DOT-4 180.211(a)........ $10,000 to
series cylinder as repaired $25,000.
or rebuilt to the
requirements of the HMR
without being authorized by
the Associate Administrator.
F. Cargo Tank Motor Vehicles:
[[Page 56]]
1. Failure to maintain 180.417(b), (c).
complete cargo tank test
reports, as required:
a. No records........... .................. $5,000.
b. Incomplete records... .................. $1,200 to $3,700.
2. Failure to have a cargo 180.407(c)........ $8,000 and up;
tank tested or inspected increase by 25
(e.g., visual, thickness, percent for each
pressure, leakproofness). additional.
3. Failure to mark a cargo 180.415........... $600 each item.
tank with test and
inspection markings.
4. Failure to retain a cargo 178.320(b), $6,200.
tank's data report and 178.337-18,
Certificates or design 178.338-19,
certification. 178.345-15.
5. Failure to mark a special 172.301(c)........ $1,800.
permit number on a cargo
tank.
6. Constructing a cargo tank 178.320(b), $13,500.
or cargo tank motor vehicle Special Permit.
not in accordance with a
special permit or design
certification.
7. Failure to mark manhole 178.345-5(e)...... $4,500.
assemblies on a cargo tank
motor vehicle manufactured
after October 1, 2004.
8. Failure to apply 178.337-17,
specification plate and 178.338-18,
name plate:. 178.345-14.
a. No marking........... .................. $4,500.
b. Incomplete marking... .................. $600 per item.
9. Failure to conduct 180.416(d)........ $2,500.
monthly inspections and
tests of discharge system
in cargo tanks.
G. Cylinder Requalification:
1. Certifying or marking as 180.205(a)........ $1,000.
retested a non-
specification cylinder.
2. Failure to have 180.205(b)........ $5,000.
retester's identification
number (RIN).
3. Failure to have current 180.205(b)........ $2,500 + $600 each
authority due to failure to additional year.
renew a RIN.
4. Marking a RIN before 180.205(b)........ $1,000.
successfully completing a
hydrostatic retest.
5. Representing, marking, or 171.2(c), (e), $2,500 to $7,500.
certifying a cylinder as 180.205(c),
meeting the requirements of Special Permit.
a special permit when the
cylinder was not maintained
or retested in accordance
with the special permit.
6. Failure to conduct a 180.205(f)........ $2,600 to $6,500.
complete visual external
and internal examination.
7. Performing hydrostatic 180.205(g)(1), $2,600 to $6,500.
retesting without 180.205(g)(3).
confirming the accuracy of
the test equipment or
failing to conduct
hydrostatic testing.
8. Failure to hold 180.205(g)(5)..... $3,800.
hydrostatic test pressure
for 30 seconds or
sufficiently longer to
allow for complete
expansion.
9. Failure to perform a 180.205(g)(5)..... $3,800.
second retest, after
equipment failure, at a
pressure increased by the
lesser of 10 percent or 100
psi (includes exceeding
90percent of test pressure
prior to conducting a
retest).
10. Failure to condemn a 180.205(i)........ $7,500 to $13,500.
cylinder when required
(e.g., permanent expansion
exceeds 10 percent of total
expansion [5percent for
certain special permit
cylinders], internal or
external corrosion,
denting, bulging, evidence
of rough usage).
11. Failure to properly mark 180.205(i)(2)..... $1,000 to $5,000.
a condemned cylinder or
render it incapable of
holding pressure.
12. Failure to notify the 180.205(i)(2)..... $1,200.
cylinder owner in writing
when a cylinder has been
condemned.
13. Failure to perform 180.209(a)........ $2,600 to $6,500.
hydrostatic retesting at
the minimum specified test
pressure.
14. Marking a star on a 180.209(b)........ $2,500 to $5,000.
cylinder that does not
qualify for that mark.
15. Marking a `` + '' sign 173.302a(b)....... $2,500 to $5,000.
on a cylinder without
determining the average or
minimum wall stress by
calculation or reference to
CGA Pamphlet C-5.
16. Marking a cylinder in or 180.213(b)........ $7,500 to $13,500.
on the sidewall when not
permitted by the applicable
specification.
17. Failure to maintain 180.213(b)(1)..... $1,000.
legible markings on a
cylinder.
18. Marking a DOT 3HT 180.213(c)(2)..... $7,500 to $13,500.
cylinder with a steel stamp
other than a low-stress
steel stamp.
19. Improper marking of the 180.213(d)........ $1,000.
RIN or retest date on a
cylinder.
[[Page 57]]
20. Marking an FRP cylinder Special Permit.... $7,500 to $13,500.
with steel stamps in the
FRP area of the cylinder
such that the integrity of
the cylinder is compromised.
21. Failure to comply with Appendix C to part $2,600 to $6,500.
eddy current examination 180.
requirements for DOT 3AL
cylinders manufactured of
aluminum alloy 6351-T6,
when applicable.
22. Failure to maintain 180.215(a)........ $700 to $1,500.
current copies of the HMR,
DOT special permits, and
CGA Pamphlets applicable to
inspection, retesting, and
marking activities.
23. Failure to keep complete 180.215(b).
and accurate records of
cylinder reinspection and
retest:
a. No records kept...... .................. $5,000.
b. Incomplete or .................. $1,200 to $3,700.
inaccurate records.
------------------------------------------------------------------------
Carrier Requirements
------------------------------------------------------------------------
A. Incident Notification:
1. Failure to provide 171.15............ $6,000.
immediate telephone/online
notification of a
reportable hazardous
materials incident
reportable under 171.15(b).
2. Failure to file a written 171.16............ $4,000.
hazardous material incident
report within 30 days of
discovering a hazardous
materials incident
reportable under 171.15(b)
or 171.16(a).
3. Failure to include all 171.15, 171.16.... $1,000.
required information in
hazardous materials
incident notice or report
or failure to update report.
B. Shipping Papers:
1. Failure to retain 174.24(b), $1,200.
shipping papers for 1 year 175.33(c),
after a hazardous material 176.24(b),
(or 3 years for a hazardous 177.817(f).
waste) is accepted by the
initial carrier.
C. Stowage/Attendance/
Transportation Requirements:
1. Transporting packages of Various........... $3,700 and up.
hazardous material that
have not been secured
against movement.
2. Failure to properly Various........... $9,300 and up.
segregate hazardous
materials.
3. Failure to remove a 177.834(h).
package containing
hazardous materials from a
motor vehicle before
discharge of its contents:
a. Packing Group I and .................. $5,000.
Sec. 172.504 Table 1
materials.
b. Packing Group II..... .................. $3,000.
c. Packing Group III.... .................. $1,000.
4. Transporting explosives 177.835(i)........ $6,500 and up.
in a motor vehicle
containing metal or other
articles or materials
likely to damage the
explosives or any package
in which they are
contained, without
segregating in different
parts of the load or
securing them in place in
or on the motor vehicle and
separated by bulkheads or
other suitable means to
prevent damage.
5. Failure to attend Class 1 177.835(k)........ $3,000.
explosive materials during
transportation.
6. Transporting railway 171.2(b), (e)..... $8,700.
track torpedoes outside of
flagging kits, in violation
of DOT-E 7991.
7. Failure to carry a hazmat 107.620(b)........ $1,000.
registration letter or
number in the transport
vehicle.
8. Transporting Class 7 177.842(a)........ $6,200 and up.
(radioactive) material
having a total transport
index greater than 50.
9. Transporting Class 7 177.842(b)........ $6,200 and up.
(radioactive) material
without maintaining the
required separation
distance.
10. Failure to comply with 171.2(b), (e), $6,200 and up.
radiation survey Special Permit.
requirements of a special
permit that authorizes the
transportation of Class 7
(radioactive) material
having a total
transportation index
exceeding 50.
------------------------------------------------------------------------
The baseline penalty amounts in Part II are used as a starting
amount or range appropriate for the normal or typical nature, extent,
circumstances, and gravity of the probable violations frequently cited
in enforcement reports. PHMSA must also consider any additional factors,
as provided in 49 U.S.C. 5123(c) and 49 CFR 107.331, including the
nature, circumstances, extent and gravity of a violation, the degree of
culpability and compliance history of the respondent,
[[Page 58]]
the financial impact of the penalty on the respondent, and other matters
as justice requires. Consequently, at each stage of the administrative
enforcement process, up to and including issuance of a final order or
decision on appeal, PHMSA can adjust the baseline amount in light of the
specific facts and circumstances of each case.
As part of this analysis, PHMSA reviews the factors outlined in the
next section, Miscellaneous Factors Affecting Penalty Amounts, the
safety implications of the violation, the pervasiveness of the
violation, and all other relevant information. PHMSA considers not only
what happened as a result of the violation, but also what could have
happened as a result of continued violation of the regulations. As a
general matter, one or more specific instances of a violation are
presumed to reflect a respondent's general manner of operations, rather
than isolated occurrences.
PHMSA may draw factors relevant to the statutory considerations from
the initial information gathered by PHMSA's Office of Hazardous
Materials Safety Field Operations, the respondent in response to an exit
briefing, ticket, or Notice of Probable Violation (NOPV), or information
otherwise available to us. We will generally apply the specific
statutory factors that are outlined in the next section, Miscellaneous
Factors Affecting Penalty Amounts, in the following order:
1. Select the appropriate penalty amount within a specific baseline
or range, with appropriate increases or decreases depending on the
packing group or material involved and other information regarding the
frequency or duration of the violation, the culpability of the
respondent, and the actual or potential consequences of the violation.
2. Apply decreases for a reshipper or carrier that reasonably relied
on an offeror's non-compliant preparation of a hazardous materials
shipment.
3. Apply increases for multiple counts of the same violation.
4. Apply increases for prior violations of the HMR within the past
six years.
5. Apply decreases for corrective actions.
6. Apply decreases for respondent's inability to pay or adverse
effect on its ability to continue in business.
After each adjustment listed above, PHMSA will use the new modified
baseline to calculate each subsequent adjustment. PHMSA will apply
adjustments separately to each individual violation. All penalty
assessments will be subject to additional adjustments as appropriate to
reflect other matters as justice requires.
A. Respondents That Reship
A person who either receives hazardous materials from another
company and reships them (reshipper), or accepts a hazardous material
for transportation, and transports that material (carrier), is
responsible for ensuring that the shipment complies in all respects with
Federal hazardous materials transportation law. In both cases, the
reshipper or carrier independently may be subject to enforcement action
if the shipment does not comply.
Depending on all the circumstances, however, the person who
originally prepared the shipment and placed it into transportation may
have greater culpability for the noncompliance than the reshipper or
carrier who reasonably relies on the shipment as received and does not
open or alter the package before the shipment continues in
transportation. PHMSA will consider the specific knowledge and expertise
of all parties, as well as which party is responsible for compliance
under the regulations, when evaluating the culpability of a reshipper or
carrier. PHMSA recognizes that a reshipper or carrier may have
reasonably relied upon information from the original shipper and may
reduce the applicable baseline penalty amount up to 25 percent.
B. Penalty Increases for Multiple Counts
A main objective of PHMSA's enforcement program is to obtain
compliance with the HMR and the correction of violations which, in many
cases, have been part of a company's regular course of business. As
such, there may be multiple instances of the same violation. Examples
include a company shipping various hazardous materials in the same
unauthorized packaging, shipping the same hazardous material in more
than one type of unauthorized packaging, shipping hazardous materials in
one or more packagings with the same marking errors, or using shipping
papers with multiple errors.
Under the Federal hazmat law, 49 U.S.C. 5123(a), each violation of
the HMR and each day of a continuing violation (except for violations
relating to packaging manufacture or qualification) is subject to a
civil penalty of up to $78,376 or $182,877 for a violation occurring on
or after April 19, 2017. As such, PHMSA generally will treat multiple
occurrences that violate a single regulatory provision as separate
violations and assess the applicable baseline penalty for each distinct
occurrence of the violation. PHMSA will generally consider multiple
shipments or, in the case of package testers, multiple package designs,
to be multiple occurrences; and each shipment or package design may
constitute a separate violation.
PHMSA, however, will exercise its discretion in each case to
determine the appropriateness of combining into a single violation what
could otherwise be alleged as separate violations and applying a single
penalty for multiple counts or days of a violation, increased by 25
percent for each additional instance, as directed by 49 U.S.C. 5123(c).
For
[[Page 59]]
example, PHMSA may treat a single shipment containing three items or
packages that violate the same regulatory provision as a single
violation and apply a single baseline penalty with a 50 percent increase
for the two additional items or packages; and PHMSA may treat minor
variations in a package design for a package tester as a single
violation and apply a single baseline penalty with a 25 percent increase
for each additional variation in design.
When aggravating circumstances exist for a particular violation,
PHMSA may handle multiple instances of a single regulatory violation
separately, each meriting a separate baseline or increase the civil
penalty by 25 percent for each additional instance. Aggravating factors
may include increased safety risks, continued violation after receiving
notice, or separate and distinct acts. For example, if the multiple
occurrences each require their own distinct action, then PHMSA may count
each violation separately (e.g., failure to obtain approvals for
separate fireworks devices).
C. Penalty Increases for Prior Violations
The baseline penalty in the List of Frequently Cited Violations
assumes an absence of prior violations. If a respondent has prior
violations of the HMR, generally, PHMSA will increase a proposed
penalty.
When setting a civil penalty, PHMSA will review the respondent's
compliance history and determine if there are any finally-adjudicated
violations of the HMR initiated within the previous six years. Only
cases or tickets that have been finally-adjudicated will be considered
(i.e., the ticket has been paid, a final order has been issued, or all
appeal remedies have been exhausted or expired). PHMSA will include
prior violations that were initiated within six years of the present
case; a case or ticket will be considered to have been initiated on the
date of the exit briefing for both the prior case and the present case.
If multiple cases are combined into a single Notice of Probable
Violation or ticket, the oldest exit briefing will be used to determine
the six-year period. If a situation arises where no exit briefing is
issued, the date of the Notice of Probable Violation or Ticket will be
used to determine the six-year period. PHMSA may consider prior
violations of the Hazardous Materials Regulations from other DOT
Operating Administrations.
The general standards for increasing a baseline proposed penalty on
the basis of prior violations are as follows:
1. For each prior civil or criminal enforcement case--25 percent
increase over the pre-mitigation recommended baseline penalty.
2. For each prior ticket--10 percent increase over the pre-
mitigation recommended baseline penalty.
3. If a respondent is cited for operating under an expired special
permit and previously operated under an expired special permit (as
determined in a finally-adjudicated civil, criminal, or administrative
enforcement case or a ticket), PHMSA will increase the civil penalty 100
percent.
4. If a respondent is cited for the exact same violation that it has
been previously cited for within the six-year period (in a finally-
adjudicated civil, criminal, or administrative enforcement case or a
ticket), PHMSA will increase the baseline for that violation by 100
percent. This increase will apply only when the present violation is
identical to the previous violation and applies only to the specific
violation that has recurred.
5. A baseline proposed penalty (both for each individual violation
and the combined total) will not be increased more than 100 percent on
the basis of prior violations.
D. Corrective Action
PHMSA may lower a proposed penalty when a respondent's documented
corrective action has fixed an alleged violation. Corrective action
should demonstrate not only that the specific deficiency is corrected
but also that any systemic corrections have been addressed to prevent
recurrence of the violation.
The two primary factors that determine the reduction amount are the
extent and timing of the corrective action. In other words, PHMSA will
determine the amount of mitigation based on how much corrective action a
respondent completes and how soon after the exit briefing it performs
corrective action. Comprehensive systemic action to prevent future
violations may warrant greater mitigation than actions that simply
target violations identified during the inspection. Actions taken
immediately (within the 30 calendar day period that respondents have to
respond to an exit briefing, or upon approval of Field Operations) may
warrant greater mitigation than actions that are not taken promptly.
PHMSA may consider a respondent's corrective action to assess
mitigation at various stages in the enforcement process, including: (1)
AFTEr an inspection and before an NOPV is issued; (2) on receipt of an
NOPV; or (3) after receipt of an NOPV. In order to reduce a civil
penalty for corrective action, PHMSA must receive satisfactory
documentation that demonstrates the corrective action was completed. If
a corrective action is of a type that cannot be documented (e.g., no
longer using a particular packaging), then a respondent may provide a
signed affidavit describing the action it took. The affidavit must begin
with the affirmative oath ``I hereby affirm under the penalties of
perjury that the below statements are true and correct to the best of my
knowledge, information and belief,'' in accordance with 28 U.S.C. 1746.
[[Page 60]]
Generally, corrective action credit may not exceed 25 percent.
Mitigation is applied to individual violations and fact patterns but
should not be considered to be automatic reduction. Thus, in a case with
two violations, if corrective action for the first violation is more
extensive than for the second, the penalty for the first will be
mitigated more than that for the second. If a respondent has previously
committed the same violation, however, as determined in a finally-
adjudicated civil, criminal, or administrative enforcement case or a
ticket, PHMSA will not apply any reduction for corrective action.
In determining the appropriate civil penalty reduction, PHMSA will
consider the extent to which the respondent corrected the violation and
any risks or harms it created, the respondent's actions to prevent the
violation from recurring, improvements to overall company practices to
address a widespread compliance issue, and how quickly the corrective
action was performed. In general, PHMSA will apply the following
reductions for corrective action, subject to the facts and circumstances
of individual cases and respondents. If a respondent has given full
documentation of timely corrective action and PHMSA does not believe
that anything else can be done to correct the violation or improve
overall company practices, we will generally reduce the civil penalty by
no more than 25 percent. As noted above, a 25 percent reduction is not
automatic. We will reduce the penalty up to 20 percent when a respondent
promptly and completely corrected the cited violation and has taken
substantial steps toward comprehensive improvements. PHMSA will
generally apply a reduction up to 15 percent when a respondent has made
substantial and timely progress toward correcting the specific violation
as well as overall company practices, but additional actions are needed.
A reduction up to 10 percent is appropriate when a respondent has taken
significant steps toward addressing the violation, but minimal or no
steps toward correcting broader company policies to prevent future
violations. PHMSA may reduce a penalty up to 5 percent when a respondent
made untimely or minimal efforts toward correcting the violation.
E. Financial Considerations
PHMSA may mitigate a proposed penalty when a respondent documents
that the penalty would either (1) exceed an amount that the respondent
is able to pay, or (2) have an adverse effect on the respondent's
ability to continue in business. These criteria relate to a respondent's
entire business, and not just the product line or part of its operations
involved in a violation. PHMSA may apply this mitigation by reducing the
civil penalty or instituting a payment plan.
PHMSA will only mitigate a civil penalty based on financial
considerations when a respondent supplies financial documentation
demonstrating one of the factors above. A respondent may submit
documentation of financial hardship at any stage to receive mitigation
or an installment payment plan. Documentation includes tax records, a
current balance sheet, profit and loss statements, and any other
relevant records. Evidence of a respondent's financial condition is used
only to decrease a penalty, and not to increase it.
In evaluating the financial impact of a penalty on a respondent,
PHMSA will consider all relevant information on a case-by-case basis.
Although PHMSA will determine financial hardship and appropriate penalty
adjustments on an individual basis, in general, we will consider the
following factors.
1. The overall financial size of the respondent's business and
information on the respondent's balance sheet, including the current
ratio (current assets to current liabilities), the nature of current
assets, and net worth (total assets minus total liabilities).
2. A current ratio close to or below 1.0 may suggest that the
company would have difficulty in paying a large penalty or in paying it
in a single lump sum.
3. A small amount of cash on hand (representing limited liquidity),
even with substantial other current assets (such as accounts receivable
or inventory), may suggest a company would have difficulty in paying a
penalty in a single lump sum.
4. A small or negative net worth may suggest a company would have
difficulty in paying a penalty in a single lump sum. Notwithstanding,
many respondents have paid substantial civil penalties in installments
even though net worth was negative. For this reason, negative net worth
alone does not always warrant reduction of a proposed penalty or even,
in the absence of factors discussed above, a payment plan.
When PHMSA determines that a proposed penalty poses a significant
financial hardship, we may reduce the proposed penalty and/or implement
an installment payment plan. The appropriateness of these options will
depend on the circumstances of the case.
When an installment payment plan is appropriate, the length of the
payment plan should be as short as possible, but may be adjusted as
necessary. PHMSA will not usually exceed six months for a payment plan.
In unusual circumstances, PHMSA may extend the period of a payment plan.
For example, the duration of a payment plan may reflect fluctuations in
a company's income if its business is seasonal or if the company has
documented specific reasons for current non-liquidity.
[78 FR 60733, Oct. 2, 2013, as amended at 81 FR 42268, June 29, 2016; 82
FR 18399, Apr. 19, 2017]
[[Page 61]]
Subpart E_Designation of Approval and Certification Agencies
Sec. 107.401 Purpose and scope.
(a) This subpart establishes procedures for the designation of
agencies to issue certificates and certifications for types of
packagings designed, manufactured, tested, or maintained in conformance
with the requirements of this subchapter, subchapter C of this chapter,
and standards set forth in the United Nations (U.N.) Recommendations
(Transport of Dangerous Goods), and for lighters, portable tanks, multi-
element gas containers, and Division 1.4G consumer fireworks in
conformance with the requirements of this subchapter. Except for
certifications of compliance with U.N. packaging standards, this subpart
does not apply unless made applicable by a rule in subchapter C of this
chapter.
(b) The Associate Administrator may issue approval certificates and
certifications addressed in paragraph (a) of this section.
[78 FR 42473, July 16, 2013]
Sec. 107.402 Application for designation as a certification agency.
(a) Any organization or person seeking to be approved as a
certification agency must apply in writing to the Associate
Administrator for Hazardous Materials Safety (PHH-32), Department of
Transportation, East Building, 1200 New Jersey Avenue SE., Washington DC
20590-0001. Alternatively, the application in an appropriate format may
be submitted by facsimile (fax) to: (202) 366-3753 or (202) 366-3308 or
by electronic mail (email) to: [email protected]. Each application must
be signed and certified to be correct by the applicant or, if the
applicant is an organization, by an authorized officer or official
representative of the organization. Any false statement or
representation, or the knowing and willful concealment of a material
fact, may subject the applicant to prosecution under the provisions of
18 U.S.C. 1001, and result in the denial or termination of a
designation.
(b) Each application for approval as a certification agency must be
in English and include the following information:
(1) Information required by the provisions in subpart H of this
part;
(2) Name and address of the applicant, including place of
incorporation if a corporation. In addition, if the applicant is not a
resident of the United States, the name and address of a permanent
resident of the United States designated in accordance with Sec. 105.40
of this subchapter to serve as agent for service of process. A person
approved as a certification agency is not a PHMSA agent or
representative;
(3) A statement acknowledging that the Associate Administrator or a
designated official may inspect, on demand, its records and facilities
in so far as they relate to the certification activities and will
cooperate in the conduct of such inspections; and
(4) Any additional information relevant to the applicant's
qualifications, upon request of the Associate Administrator or a
designated official.
(c) UN Third-Party Packaging Certification Agency. In addition to
the requirements in paragraph (b) of this section, the application must
include the following information:
(1) A listing, by DOT specification (or special permit) number, or
U.N. designation, of the types of packagings for which certification
authority is sought;
(2) A statement showing proof that the applicant has:
(i) The ability to review and evaluate design drawings, design and
stress calculations;
(ii) The knowledge of the applicable regulations of subchapter C of
this chapter and, when applicable, U.N. standards;
(iii) The ability to conduct or monitor and evaluate test procedures
and results; and
(iv) The ability to review and evaluate the qualifications of
materials and fabrication procedures.
(3) A statement that the applicant will perform its functions
independent of the manufacturers and owners of the packagings concerned.
(4) If the applicant's principal place of business is in a country
other than
[[Page 62]]
the United States, a copy of the designation from the Competent
Authority of that country delegating to the applicant an approval or
designated agency authority for the type of packaging for which a DOT
designation is sought, and a statement that the Competent Authority also
delegates similar authority to U.S. Citizens or organizations having
designations under this subpart from PHMSA.
(d) Fireworks Certification Agency. Prior to reviewing, and
certifying Division 1.4G consumer fireworks (UN0336) for compliance with
the APA Standard 87-1 (IBR, see Sec. 171.7 of this chapter) as
specified in part 173 of this chapter, a person must apply to, and be
approved by, the Associate Administrator to act as an Fireworks
Certification Agency.
(1) Fireworks Certification Agency applicant requirements. The
Fireworks Certification Agency applicant must--
(i) Be a U.S. resident, or for a non-U.S. resident, have a
designated U.S. agent representative as specified in Sec. 105.40 of
this subchapter;
(ii) Employ personnel with work experience in manufacturing or
testing of fireworks or explosives; or a combination of work experience
in manufacturing or testing of fireworks or explosives and a degree in
the physical sciences or engineering from an accredited university;
(iii) Have the ability to:
(A) Review design drawings, and applications to certify that they
are in accordance with the APA Standard 87-1; and
(B) Verify that the applicant has certified the thermal stability
test procedures and results.
(iv) Must be independent of and not owned by any consumer fireworks
manufacturer, distributor, import or export company, or proprietorship.
(2) Fireworks Certification Agency application submittal
requirements. In addition to the requirements of paragraphs (b) and
(d)(1) of this section, the Fireworks Certification Agency application
must include--
(i) Name, address, and country of each facility where Division 1.4G
consumer fireworks applications are reviewed and certified;
(ii) A detailed description of the qualifications of each individual
the applicant proposes to employ to review, and certify that the
requirements specified by part 173 of this chapter and the APA Standard
87-1 have been met;
(iii) Written operating procedures to be used by the Fireworks
Certification Agency to review and certify that a Division 1.4G consumer
fireworks application meets the requirements specified in the APA
Standard 87-1;
(iv) Name, address, and principal business activity of each person
having any direct or indirect interest in the applicant greater than
three percent and any direct or indirect ownership interest in each
subsidiary or division of the applicant; and
(v) A statement that the applicant will perform its functions
independent of the manufacturers, transporters, importers, and owners of
the fireworks.
(e) Lighter certification agency. Prior to examining and testing
lighters (UN1057) for certification of compliance with the requirements
of Sec. 173.308 of this chapter a person must submit an application to,
and be approved by, the Associate Administrator to act as a lighter
certification agency. In addition to paragraph (b) of this section, the
application must include the following information:
(1) The name and address of each facility where lighters are
examined and tested;
(2) A detailed description of the applicant's qualifications and
ability to, examine and test lighters and certify that the requirements
specified by Sec. 173.308 of this chapter have been met; and
(3) A statement that the agency is independent of and not owned by a
lighter manufacturer, distributor, import or export company, or
proprietorship.
(f) Portable tank and MEGC certification agencies. Prior to
inspecting portable tanks or multi-element gas containers (MEGCs) for
certification of compliance with the requirements of Sec. Sec. 178.273
and 178.74 of this chapter, respectively, a person must submit an
application to, and be approved by, the Associate Administrator to act
as a certification agency. In addition to paragraph (b) of this section,
the application must provide the following information:
[[Page 63]]
(1) The name and address of each facility where the portable tank or
MEGC, as applicable, is examined and tested;
(2) A detailed description of the applicant's qualifications and
ability to examine and test portable tanks or MEGCs, as applicable, and
certify that the requirements specified by Sec. 178.273 of this chapter
for the approval of UN portable tanks, or Sec. 178.74 of this chapter
for the approval of MEGCs have been met; and
(3) A statement indicating that the agency is independent of and not
owned by a portable tank or MEGC manufacturer, owner, or distributor.
[78 FR 42473, July 16, 2013, as amended at 78 FR 60750, Oct. 2, 2013; 81
FR 35512, June 2, 2016]
Sec. 107.403 Designation of certification agencies.
(a) If the Associate Administrator determines that an application
contains all the required information, the applicant is sent a letter of
designation and assigned an identification code.
(b) If the Associate Administrator determines that an application
does not contain all the required information, the application is denied
and the applicant is sent a written notice containing all the reasons
for the denial.
(c) Within 30 days of an initial denial of an application under
paragraph (b) of this section, the applicant may file an amended
application. If the application is denied by the Associate Administrator
of Hazardous Materials Safety, the applicant may, within 20 days of
receipt of the decision, request reconsideration by the Associate
Administrator as set forth in Sec. 107.715. If the reconsideration is
denied by the Associate Administrator, the applicant may appeal the
Associate Administrator's decision, within 30 days of the Associate
Administrator's decision, to the Administrator of PHMSA, as specified in
Sec. 107.717.
(d) The Associate Administrator may modify, suspend, or terminate an
approval submitted under this subpart as set forth in Sec. 107.713.
[Amdt. 107-13, 50 FR 10062, Mar. 13, 1985, as amended by Amdt. 107-23,
56 FR 66157, Dec. 20, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994;
66 FR 45377, Aug. 28, 2001; 78 FR 42474, July 16, 2013]
Sec. 107.404 Conditions of designation.
(a) Each designation made under this subpart contains the following
conditions:
(1) The designated approval or certification agency may use only
testing equipment that it has determined, through personal inspection,
to be suitable for the purpose.
(2) Each approval certificate and certification issued by the
designated approval agency must contain the name and identification code
of the approval agency.
(3) Each approval certificate and certification must be in a format
acceptable to the Associate Administrator.
(b) The designated approval agency shall notify the Associate
Administrator within 20 days after the date there is any change in the
information submitted under Sec. 107.402.
(c) The designated approval agency shall comply with all of the
terms and conditions stated in its letter of designation under the
subpart.
(d) Nothing in this part relieves a manufacturer or owner of a
packaging of responsibility for compliance with any of the applicable
requirements of this title.
[Amdt. 107-13, 50 FR 10062, Mar. 13, 1985, as amended by Amdt. 107-23,
56 FR 66157, Dec. 20, 1991; 66 FR 45377, Aug. 28, 2001]
Sec. 107.405 [Reserved]
Subpart F_Registration of Cargo Tank and Cargo Tank Motor Vehicle
Manufacturers, Assemblers, Repairers, Inspectors, Testers, and Design
Certifying Engineers
Sec. 107.501 Scope.
(a) This subpart establishes a registration procedure for persons
who are engaged in the manufacture, assembly, inspection and testing,
certification, or repair of a cargo tank or a cargo tank
[[Page 64]]
motor vehicle manufactured in accordance with a DOT specification under
subchapter C of this chapter or under terms of a special permit issued
under this part.
(b) Persons engaged in continuing qualification and maintenance of
cargo tanks and cargo tank motor vehicles must be familiar with the
requirements set forth in part 180, subpart E, of this chapter.
[Amdt. 107-20, 55 FR 37047, Sept. 7, 1990]
Sec. 107.502 General registration requirements.
(a) Definitions: For purposes of this subpart--
(1) Assembly means the performance of any of the following functions
when the function does not involve welding on the cargo tank wall:
(i) The mounting of one or more tanks or cargo tanks on a motor
vehicle or to a motor vehicle suspension component;
(ii) The installation of equipment or components necessary to meet
the specification requirements prior to the certification of the cargo
tank motor vehicle; or
(iii) The installation of linings, coatings, or other materials to
the inside of a cargo tank wall.
(2) The terms Authorized Inspector, Cargo tank, Cargo tank motor
vehicle, Design Certifying Engineer, Registered Inspector, and Person
are defined in Sec. 171.8 of this chapter.
(3) The terms cargo tank wall and manufacturer are defined in Sec.
178.320(a), and repair is defined in Sec. 180.403 of this chapter.
(b) No person may engage in the manufacture, assembly,
certification, inspection or repair of a cargo tank or cargo tank motor
vehicle manufactured under the terms of a DOT specification under
subchapter C of this chapter or a special permit issued under this part
unless the person is registered with the Department in accordance with
the provisions of this subpart. A person employed as an inspector or
design certifying engineer is considered to be registered if the
person's employer is registered. The requirements of this paragraph (b)
do not apply to a person engaged in the repair of a DOT specification
cargo tank used in the transportation of hazardous materials in the
United States in accordance with Sec. 180.413(a)(1)(iii) of this
chapter.
(c) A person who performs functions which are subject to the
provisions of this subpart may perform only those functions which have
been identified to the Department in accordance with the procedures of
this subpart.
(d) Registration statements must be in English, contain all of the
information required by this subpart, and be submitted to: FMCSA
Hazardous Materials Division--MC-ECH, West Building, MC-ECH, 1200 New
Jersey Avenue, SE., Washington, DC 20590.
(e) Upon determination that a registration statement contains all
the information required by this subpart, the Department will send the
registrant a letter confirming receipt of the registration application
and assigning a registration number to that person. A separate
registration number will be assigned for each cargo tank manufacturing,
assembly, repair facility or other place of business identified by the
registrant.
[Amdt. 107-20, 54 FR 25003, June 12, 1989; 55 FR 37047, Sept. 7, 1990,
as amended by Amdt. 107-22, 55 FR 39978, Oct. 1, 1990; Amdt. 107-23, 56
FR 66157, Dec. 20, 1991; Amdt. 107-28, 58 FR 46873, Sept. 3, 1993; Amdt.
107-39, 61 FR 51337, Oct. 1, 1996; 67 FR 61011, Sept. 27, 2002; 68 FR
19273, Apr. 18, 2003; 72 FR 55683, Oct. 1, 2007; 82 FR 15832, Mar. 30,
2017]
Sec. 107.503 Registration statement.
(a) Each registration statement must be in English and contain the
following information:
(1) Name;
(2) Street address, mailing address and telephone number for each
facility or place of business;
(3) A statement indicating whether the facility uses mobile testing/
inspection equipment to perform inspections, tests, or repairs at a
location other than the address listed in paragraph (a)(2) of this
section.
(4) A statement signed by the person responsible for compliance with
the applicable requirements of this chapter, certifying knowledge of
those requirements and that each employee who is a Registered Inspector
or Design Certifying Engineer meets the minimum
[[Page 65]]
qualification requirements set forth in Sec. 171.8 of this chapter for
``Registered Inspector'' or ``Design Certifying Engineer''. The
following language may be used.
I certify that all Registered Inspectors and Design Certifying
Engineers used in performance of the prescribed functions meet the
minimum qualification requirements set forth in 49 CFR 171.8, that I am
the person responsible for ensuring compliance with the applicable
requirements of this chapter, and that I have knowledge of the
requirements applicable to the functions to be performed.
(5) A description of the specific functions to be performed on cargo
tanks or cargo tank motor vehicles, e.g.:
(i) Manufacture,
(ii) Assembly,
(iii) Inspection and testing (specify type, e.g., external or
internal visual inspection, lining inspection, hydrostatic pressure
test, leakage test, thickness test),
(iv) Certification,
(v) Repair, or
(vi) Equipment manufacture;
(6) An identification of the types of DOT specification and special
permit cargo tanks or cargo tank motor vehicles which the registrant
intends to manufacture, assemble, repair, inspect, test or certify;
(7) A statement indicating whether the registrant employs Registered
Inspectors or Design Certifying Engineers to conduct certification,
inspection or testing functions addressed by this subpart. If the
registrant engages a person who is not an employee of the registrant to
perform these functions, provide the name, address and registration
number of that person; and
(8) If the registrant is not a resident of the United States, the
name and address of a permanent resident of the United States designated
in accordance with Sec. 105.40 to serve as agent for service of
process.
(b) In addition to the information required under paragraph (a) of
this section, each person who manufactures a cargo tank or cargo tank
motor vehicle must submit a copy of the manufacturer's current ASME
Certificate of Authorization for the use of the ASME ``U'' stamp.
(c) In addition to the information required under paragraph (a) of
this section, each person who repairs a cargo tank or cargo tank motor
vehicle must submit a copy of the repair facility's current National
Board Certificate of Authorization for the use of the ``R'' stamp or
ASME Certificate of Authorization for the use of the ASME ``U'' stamp.
Any person who repairs MC-series cargo tanks which are not certified to
the ASME Code must submit a copy of the National Board or ASME
Certificate of Authorization to PHMSA before June 30, 1992.
[Amdt. 107-20, 54 FR 25003, June 12, 1989; 55 FR 37047, Sept. 7, 1990;
57 FR 365, Jan. 6, 1992; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994;
Amdt. 107-39, 61 FR 51337, Oct. 1, 1996; 63 FR 52846, Oct. 1, 1998; 68
FR 19273, Apr. 18, 2003]
Sec. 107.504 Period of registration, updates, and record retention.
(a) Registration will be for a maximum of six years from the date of
the original registration.
(b) Any correspondence with the Department must contain the
registrant's name and registration number.
(c) A registration must be renewed every six years or within thirty
days of reissuance of an ASME or National Board Certification, whichever
occurs first, by submitting an up-to-date registration statement
containing the information prescribed by Sec. 107.503. Any person
initially registered under the provisions of Sec. 107.502 and who is in
good standing is eligible for renewal.
(d) A registrant shall provide written notification to the
Department within thirty days of any of the following occurrences:
(1) Any change in the registration information submitted under Sec.
107.503;
(2) Replacement of the person responsible for compliance with the
requirements in Sec. 107.503(a)(4). If this occurs, the registrant
shall resubmit the required certification;
(3) Loss of ASME or National Board Certificate of Authorization; or
(4) A change in function; such as, from assembly to manufacture, an
addition of a function, or a change to the types of inspections, tests
or certifications of cargo tanks or cargo tank motor vehicles.
(e) Each registrant shall maintain a current copy of the
registration information submitted to the Department
[[Page 66]]
and a current copy of the registration number identification received
from the Department at the location identified in Sec. 107.503(a)(2)
during such time the person is registered with the Department and for
two years thereafter.
(f) The issuance of a registration number under this subpart is not
an approval or endorsement by the Department of the qualifications of
any person to perform the specified functions.
[Amdt. 107-20, 54 FR 25003, June 12, 1989; 55 FR 37048, Sept. 7, 1990,
as amended by Amdt. 107-20, 56 FR 27875, June 17, 1991; Amdt. 107-37, 61
FR 18931, Apr. 29, 1996; 71 FR 54390, Sept. 14, 2006]
Subpart G_Registration of Persons Who Offer or Transport Hazardous
Materials
Source: Amdt. 107-26, 57 FR 30630, July 9, 1992, unless otherwise
noted.
Sec. 107.601 Applicability.
(a) The registration and fee requirements of this subpart apply to
any person who offers for transportation, or transports, in foreign,
interstate or intrastate commerce--
(1) A highway route-controlled quantity of a Class 7 (radioactive)
material, as defined in Sec. 173.403 of this chapter;
(2) More than 25 kg (55 pounds) of a Division 1.1, 1.2, or 1.3
(explosive) material (see Sec. 173.50 of this chapter) in a motor
vehicle, rail car or freight container;
(3) More than one L (1.06 quarts) per package of a material
extremely toxic by inhalation (i.e., ``material poisonous by
inhalation,'' as defined in Sec. 171.8 of this chapter, that meets the
criteria for ``hazard zone A,'' as specified in Sec. 173.116(a) or
Sec. 173.133(a) of this chapter);
(4) A shipment of a quantity of hazardous materials in a bulk
packaging (see Sec. 171.8 of this chapter) having a capacity equal to
or greater than 13,248 L (3,500 gallons) for liquids or gases or more
than 13.24 cubic meters (468 cubic feet) for solids;
(5) A shipment in other than a bulk packaging of 2,268 kg (5,000
pounds) gross weight or more of one class of hazardous materials for
which placarding of a vehicle, rail car, or freight container is
required for that class, under the provisions of subpart F of part 172
of this chapter; or
(6) Except as provided in paragraph (b) of this section, a quantity
of hazardous material that requires placarding, under provisions of
subpart F of part 172 of this chapter.
(b) Paragraph (a)(6) of this section does not apply to those
activities of a farmer, as defined in Sec. 171.8 of this chapter, that
are in direct support of the farmer's farming operations.
(c) In this subpart, the term ``shipment'' means the offering or
loading of hazardous material at one loading facility using one
transport vehicle, or the transport of that transport vehicle.
[65 FR 7309, Feb. 14, 2000, as amended at 67 FR 61011, Sept. 27, 2002]
Sec. 107.606 Exceptions.
(a) The following are excepted from the requirements of this
subpart:
(1) An agency of the Federal government.
(2) A State agency.
(3) An agency of a political subdivision of a State.
(4) An Indian tribe.
(5) An employee of any of those entities in paragraphs (a)(1)
through (a)(4) of this section with respect to the employee's official
duties.
(6) A hazmat employee (including, for purposes of this subpart, the
owner-operator of a motor vehicle that transports in commerce hazardous
materials, if that vehicle at the time of those activities, is leased to
a registered motor carrier under a 30-day or longer lease as prescribed
in 49 CFR part 376 or an equivalent contractual agreement).
(7) A person domiciled outside the United States, who offers solely
from a location outside the United States, hazardous materials for
transportation in commerce, provided that the country of which such a
person is a domiciliary does not require persons domiciled in the United
States, who solely offer hazardous materials for transportation to the
foreign country from places in the United States, to file a registration
statement or to pay a registration fee.
(b) Upon making a determination that persons domiciled in the United
States, who offer hazardous materials for transportation to a foreign
country
[[Page 67]]
solely from places in the United States, must file registration
statements or pay fees to that foreign country, the U.S. Competent
Authority will provide notice of such determination directly to the
Competent Authority of that foreign country and by publication in the
Federal Register. Persons who offer hazardous materials for
transportation to the United States from that foreign country must file
a registration statement and pay the required fee no later than 60 days
following publication of the determination in the Federal Register.
[Amdt. 107-34, 60 FR 27233, May 23, 1995, as amended at 63 FR 52847,
Oct. 1, 1998; 72 FR 24538, May 3, 2007]
Sec. 107.608 General registration requirements.
(a) Each person subject to this subpart must submit a complete and
accurate registration statement on DOT Form F 5800.2 not later than June
30 for each registration year, or in time to comply with paragraph (b)
of this section, whichever is later. Each registration year begins on
July 1 and ends on June 30 of the following year.
(b) No person required to file a registration statement may
transport a hazardous material or cause a hazardous material to be
transported or shipped, unless such person has on file, in accordance
with Sec. 107.620, a current Certificate of Registration in accordance
with the requirements of this subpart.
(c) A registrant whose name or principal place of business has
changed during the year of registration must notify PHMSA of that change
by submitting an amended registration statement not later than 30 days
after the change.
(d) Copies of DOT Form F 5800.2 and instructions for its completion
may be obtained from the Outreach, Training and Grants Division, PHH-50,
U.S. Department of Transportation, Washington, DC 20590-0001, by calling
202-366-4109, or via the Internet at http://phmsa.dot.gov/hazmat/
registration.
(e) If the registrant is not a resident of the United States, the
registrant must attach to the registration statement the name and
address of a permanent resident of the United States, designated in
accordance with Sec. 105.40, to serve as agent for service of process.
[Amdt. 107-26, 57 FR 30630, July 9, 1992, as amended by Amdt. 107-31, 59
FR 32932, June 27, 1994; 65 FR 7309, Feb. 14, 2000; 67 FR 61011, Sept.
27, 2002; 70 FR 56090, Sept. 23, 2005; 72 FR 55683, Oct. 1, 2007; 76 FR
56311, Sept. 13, 2011]
Sec. 107.612 Amount of fee.
(a) For purposes of determining the applicable annual registration
fee specified in paragraph (b) of this section, the following
classification applies to each person required to register and pay a
registration fee:
(1) Small business. A person that qualifies as a small business,
under criteria specified in 13 CFR part 121 applicable to the North
American Industry Classification System (NAICS) code that describes that
person's primary commercial activity.
(2) Not-for-profit organization. An organization exempt from
taxation under 26 U.S.C. 501(a).
(3) Other than a small business or not-for-profit organization. Each
person that does not meet the criteria specified in paragraph (a)(1) or
(a)(2) of this section.
(b) Each person subject to the requirements of this subpart must pay
the processing fee specified in paragraph (c) of this section and the
annual registration fee set forth in the following table:
----------------------------------------------------------------------------------------------------------------
Other than small
Not-for-profit business or not-
Registration year Small business organization for-profit
organization
----------------------------------------------------------------------------------------------------------------
2014-2015 and later.................................... $250 $250 $2,575
2013-2014.............................................. 125 125 1,300
2012-2013, 2011-2012, 2010-2011........................ 250 250 2,575
2009-2010, 2008-2009, 2007-2008, 2006-2007............. 250 250 975
2005-2006, 2004-2005, 2003-2004........................ 125 125 275
2002-2003, 2001-2002, 2000-2001........................ 275 (\1\) 1,975
1999-2000 and earlier.................................. 250 250 250
----------------------------------------------------------------------------------------------------------------
\1\ Fee appropriate for small or other than small business.
[[Page 68]]
(c) Each person submitting a registration statement must pay the
following processing fee in addition to the registration fees specified
in paragraph (b) of this section:
(1) For registration years 2000-2001 and later, the processing fee
is $25 for each registration statement filed. A single statement may be
filed for one, two, or three registration years as provided in Sec.
107.616(c).
(2) For registration years 1999-2000 and earlier, the processing fee
is $50 for each registration statement filed. A separate statement must
be filed for each registration year.
[78 FR 23506, Apr. 19, 2013]
Sec. 107.616 Payment procedures.
(a) Each person subject to the requirements of this subpart must
mail the registration statement and payment in full to the U.S.
Department of Transportation, Hazardous Materials Registration, P.O. Box
530273, Atlanta, GA 30353-0273, or submit the statement and payment
electronically through the Department's e-Commerce Internet site. Access
to this service is provided at http://phmsa.dot.gov/hazmat/registration.
A registrant required to file an amended registration statement under
Sec. 107.608(c) must mail it to the same address or submit it through
the same Internet site.
(b) Payment must be made by certified check, cashier's check,
personal check, or money order in U.S. funds and drawn on a U.S. bank,
payable to the U.S. Department of Transportation and identified as
payment for the ``Hazmat Registration Fee,'' or by completing an
authorization for payment by credit card or other electronic means of
payment acceptable to the Department on the registration statement or as
part of an Internet registration as provided in paragraph (a) of this
section.
(c) Payment must correspond to the total fees properly calculated in
the ``Amount Due'' block of the DOT form F 5800.2. A person may elect to
register and pay the required fees for up to three registration years by
filing one complete and accurate registration statement.
[Amdt. 107-26, 57 FR 30630, July 9, 1992, as amended by Amdt. 107-26, 58
FR 12545, Mar. 5, 1993; 65 FR 7310, Feb. 14, 2000; 67 FR 58345, Sept.
16, 2002; 68 FR 1346, Jan. 9, 2003; 71 FR 54390, Sept. 14, 2006; 72 FR
24538, May 3, 2007; 76 FR 56311, Sept. 13, 2011]
Sec. 107.620 Recordkeeping requirements.
(a) Each person subject to the requirements of this subpart, or its
agent designated under Sec. 107.608(e), must maintain at its principal
place of business for a period of three years from the date of issuance
of each Certificate of Registration:
(1) A copy of the registration statement filed with PHMSA; and
(2) The Certificate of Registration issued to the registrant by
PHMSA.
(b) After January 1, 1993, each motor carrier subject to the
requirements of this subpart must carry a copy of its current
Certificate of Registration issued by PHMSA or another document bearing
the registration number identified as the ``U.S. DOT Hazmat Reg. No.''
on board each truck and truck tractor (not including trailers and semi-
trailers) used to transport hazardous materials subject to the
requirements of this subpart. The Certificate of Registration or
document bearing the registration number must be made available, upon
request, to enforcement personnel.
(c) In addition to the requirements of paragraph (a) of this
section, after January 1, 1995, each person who transports by vessel a
hazardous material subject to the requirements of this subpart must
carry on board the vessel a copy of its current Certificate of
Registration or another document bearing the current registration number
identified as the ``U.S. DOT Hazmat Reg. No.''
(d) Each person subject to this subpart must furnish its Certificate
of Registration (or a copy thereof) and all other records and
information pertaining to the information contained in
[[Page 69]]
the registration statement to an authorized representative or special
agent of DOT upon request.
[Amdt. 107-26, 57 FR 30630, July 9, 1992, as amended at 57 FR 37902,
Aug. 21, 1992; Amdt. 107-26, 58 FR 12545, Mar. 5, 1993; Amdt. 107-31, 59
FR 32932, June 27, 1994]
Subpart H_Approvals, Registrations and Submissions
Source: Amdt. 107-38, 61 FR 21100, May 9, 1996, unless otherwise
noted.
Sec. 107.701 Purpose and scope.
(a) This subpart prescribes procedures for the issuance,
modification and termination of approvals, and the submission of
registrations and reports, as required by this chapter.
(b) The procedures of this subpart are in addition to any
requirements in subchapter C of this chapter applicable to a specific
approval, registration or report. If compliance with both a specific
requirement of subchapter C of this chapter and a procedure of this
subpart is not possible, the specific requirement applies.
(c) Registration under subpart F or G of this part is not subject to
the procedures of this subpart.
[Amdt. 107-38, 61 FR 21100, May 9, 1996; Amdt. 107-38, 61 FR 27948, June
3, 1996]
Sec. 107.705 Registrations, reports, and applications for approval.
(a) A person filing a registration, report, or application for an
approval, or a renewal or modification of an approval subject to the
provisions of this subpart must--
(1) File the registration, report, or application with the Associate
Administrator for Hazardous Materials Safety (Attention: Approvals, PHH-
32), Pipeline and Hazardous Materials Safety Administration, U.S.
Department of Transportation, East Building, 1200 New Jersey Avenue,
SE., Washington, DC 20590-0001. Alternatively, the document with any
attached supporting documentation in an appropriate format may be filed
by facsimile (fax) to: (202) 366-3753 or (202) 366-3308 or by electronic
mail (e-mail) to: [email protected].
(2) Identify the section of the chapter under which the
registration, report, or application is made;
(3) If a report is required by an approval, a registration or a
special permit, identify the approval, registration or special permit
number;
(4) Provide the name, street and mailing addresses, e-mail address
optional, and telephone number of the person on whose behalf the
registration, report, or application is made and, if different, the
person making the filing;
(5) If the person on whose behalf the filing is made is not a
resident of the United States, provide a designation of agent for
service in accordance with Sec. 105.40;
(6) Provide a description of the activity for which the registration
or report is required; and
(7) Provide additional information as requested by the Associate
Administrator, if the Associate Administrator determines that a filing
lacks pertinent information or otherwise does not comply with applicable
requirements.
(b) Description of approval proposal. In addition to the provisions
in paragraph (a) for an approval, an application for an approval, or an
application for modification or renewal of an approval, the applicant
must include the following information that is relevant to the approval
application--
(1) A description of the activity for which the approval is
required;
(2) The proposed duration of the approval;
(3) The transport mode or modes affected, as applicable;
(4) Any additional information specified in the section containing
the approval; and
(5) For an approval which provides exceptions from regulatory
requirements or prohibitions--
(i) Identification of any increased risk to safety or property that
may result if the approval is granted, and specification of the measures
that the applicant considers necessary or appropriate to address that
risk; and
(ii) Substantiation, with applicable analyses or evaluations, if
appropriate, demonstrating that the proposed activity will achieve a
level of safety that is
[[Page 70]]
at least equal to that required by the regulation.
(c) For an approval with an expiration date, each application for
renewal or modification must be filed in the same manner as an original
application. If, at least 60 days before an existing approval expires
the holder files an application for renewal that is complete and
conforms to the requirements of this section, the approval will not
expire until final administrative action on the application for renewal
has been taken. Operation under an expired approval not filed within 60
days of the expiration date is prohibited. This paragraph does not limit
the authority of the Associate Administrator to modify, suspend or
terminate an approval under Sec. 107.713.
(d) To request confidential treatment for information contained in
the application, the applicant shall comply with Sec. 105.30(a).
[Amdt. 107-38, 61 FR 21100, May 9, 1996, as amended at 65 FR 50457, Aug.
18, 2000; 67 FR 61011, Sept. 27, 2002; 70 FR 56090, Sept. 23, 2005; 70
FR 73162, Dec. 9, 2005; 72 FR 55683, Oct. 1, 2007; 79 FR 15043, Mar. 18,
2014; 80 FR 54437, Sept. 10, 2015]
Sec. 107.709 Processing of an application for approval,
including an application for renewal or modification.
(a) No public hearing or other formal proceeding is required under
this subpart before the disposition of an application.
(b) The Associate Administrator will review an application for an
approval, modification of an approval, or renewal of an approval in
conformance with the standard operating procedures specified in appendix
A of this part (``Standard Operating Procedures for Special Permits and
Approvals''). At any time during the processing of an application, the
Associate Administrator may request additional information from the
applicant. If the applicant does not respond to a written request for
additional information within 30 days of the date the request was
received, the Associate Administrator may deem the application
incomplete and deny it. The Associate Administrator may grant a 30-day
extension to respond to the written request for additional information
if the applicant makes such a request in writing.
(c) The Associate Administrator may grant or deny an application, in
whole or in part. At the Associate Administrator's discretion, an
application may be granted subject to provisions that are appropriate to
protect health, safety and property. The Associate Administrator may
impose additional provisions not specified in the application, or delete
conditions in the application which are unnecessary.
(d) The Associate Administrator may grant an application on finding
that--
(1) The application complies with this subpart;
(2) The application demonstrates that the proposed activity will
achieve a level of safety that--
(i) Is at least equal to that required by the regulation, or
(ii) If the regulations do not establish a level of safety, is
consistent with the public interest and adequately will protect against
the risks to life and property inherent in the transportation of
hazardous materials in commerce;
(3) The application states all material facts, and contains no
materially false or materially misleading statement;
(4) The applicant meets the qualifications required by applicable
regulations; and
(5) The applicant is fit to conduct the activity authorized by the
approval, or renewal or modification of approval. This assessment may be
based on information in the application, prior compliance history of the
applicant, and other information available to the Associate
Administrator.
(e) Unless otherwise specified in this chapter or by the Associate
Administrator, an approval in which a term is not specified does not
expire.
(f) The Associate Administrator notifies the applicant in writing of
the decision on the application. A denial contains a brief statement of
reasons.
[Amdt. 107-38, 61 FR 21100, May 9, 1996, as amended at 80 FR 54437,
Sept. 10, 2015]
Sec. 107.711 Withdrawal.
An application may be withdrawn at any time before a decision to
grant or
[[Page 71]]
deny it is made. Withdrawal of an application does not authorize the
removal of any related records from the PHMSA dockets or files.
Applications that are eligible for confidential treatment under Sec.
105.30 will remain confidential after the application is withdrawn. The
duration of this confidential treatment for trade secrets and commercial
or financial information is indefinite, unless the party requesting the
confidential treatment of the materials notifies the Associate
Administrator that the confidential treatment is no longer required.
[Amdt. 107-38, 61 FR 21100, May 9, 1996, as amended at 67 FR 61011,
Sept. 27, 2002]
Sec. 107.713 Approval modification, suspension or termination.
(a) The Associate Administrator may modify an approval on finding
that--
(1) Modification is necessary to conform an existing approval to
relevant statutes and regulations as they may be amended from time to
time; or
(2) Modification is required by changed circumstances to enable the
approval to continue to meet the standards of Sec. 107.709(d).
(b) The Associate Administrator may modify, suspend or terminate an
approval, as appropriate, on finding that--
(1) Because of a change in circumstances, the approval no longer is
needed or no longer would be granted if applied for;
(2) The application contained inaccurate or incomplete information,
and the approval would not have been granted had the application been
accurate and complete;
(3) The application contained deliberately inaccurate or incomplete
information; or
(4) The holder knowingly has violated the terms of the approval or
an applicable requirement of this chapter in a manner demonstrating lack
of fitness to conduct the activity for which the approval is required.
(c) Except as provided in paragraph (d) of this section, before an
approval is modified, suspended or terminated, the Associate
Administrator notifies the holder in writing of the proposed action and
the reasons for it, and provides an opportunity to show cause why the
proposed action should not be taken.
(1) The holder may file a written response with the Associate
Administrator within 30 days of receipt of notice of the proposed
action.
(2) After considering the holder's or party's written response, or
after 30 days have passed without response since receipt of the notice,
the Associate Administrator notifies the holder in writing of the final
decision with a brief statement of reasons.
(d) The Associate Administrator, if necessary to avoid a risk of
significant harm to persons or property, may in the notification declare
the proposed action immediately effective.
Sec. 107.715 Reconsideration.
(a) An applicant or a holder may request that the Associate
Administrator reconsider a decision under Sec. 107.709(f) or Sec.
107.713(c). The request must:
(1) Be in writing and filed within 20 days of receipt of the
decision;
(2) State in detail any alleged errors of fact and law;
(3) Enclose any additional information needed to support the request
to reconsider; and
(4) State in detail the modification of the final decision sought.
(b) The Associate Administrator considers newly submitted
information on a showing that the information could not reasonably have
been submitted during application processing.
(c) The Associate Administrator grants or denies, in whole or in
part, the relief requested and informs the requesting person in writing
of the decision.
Sec. 107.717 Appeal.
(a) A person who requested reconsideration under Sec. 107.715 may
appeal to the Administrator the Associate Administrator's decision on
the request. The appeal must:
(1) Be in writing and filed within 30 days of receipt of the
Associate Administrator's decision on reconsideration;
(2) State in detail any alleged errors of fact and law;
(3) Enclose any additional information needed to support the appeal;
and
(4) State in detail the modification of the final decision sought.
[[Page 72]]
(b) The Administrator, if necessary to avoid a risk of significant
harm to persons or property, may declare the Associate Administrator's
action effective pending a decision on appeal.
(c) The Administrator grants or denies, in whole or in part, the
relief requested and informs the appellant in writing of the decision on
appeal. The Administrator's decision on appeal is the final
administrative action.
Subpart I_Approval of Independent Inspection Agencies, Cylinder
Requalifiers, and Non-domestic Chemical Analyses and Tests of DOT
Specification Cylinders
Source: 67 FR 51639, Aug. 8, 2002, unless otherwise noted.
Sec. 107.801 Purpose and scope.
(a) This subpart prescribes procedures for--
(1) A person who seeks approval to be an independent inspection
agency to perform tests, inspections, verifications and certifications
of DOT specification cylinders or UN pressure receptacles as required by
parts 178 and 180 of this chapter;
(2) A person who seeks approval to engage in the requalification
(e.g. inspection, testing, or certification), rebuilding, or repair of a
cylinder manufactured in accordance with a DOT specification or a
pressure receptacle in accordance with a UN standard under subchapter C
of this chapter or under the terms of a special permit issued under this
part, or a cylinder or tube manufactured in accordance with a TC, CTC,
CRC, or BTC specification under the Transport Canada TDG Regulations
(IBR; see Sec. 171.7 of this chapter);
(3) A person who seeks approval to perform the manufacturing
chemical analyses and tests of DOT specification cylinders, special
permit cylinders, or UN pressure receptacles outside the United States.
(b) No person may engage in a function identified in paragraph (a)
of this section unless approved by the Associate Administrator in
accordance with the provisions of this subpart. Each person must comply
with the applicable requirements in this subpart. In addition, the
procedural requirements in subpart H of this part apply to the filing,
processing, and termination of an approval issued under this subpart.
[67 FR 51639, Aug. 8, 2002, as amended at 71 FR 33873, June 12, 2006; 78
FR 60750, Oct. 2, 2013; 82 FR 15832, Mar. 30, 2017]
Sec. 107.803 Approval of an independent inspection agency (IIA).
(a) General. Prior to performing cylinder inspections and
verifications required by parts 178 and 180 of this chapter, a person
must apply to the Associate Administrator for an approval as an
independent inspection agency. A person approved as an independent
inspection agency is not an PHMSA agent or representative.
(b) Criteria. No applicant for approval as an independent inspection
agency may be engaged in the manufacture of cylinders for use in the
transportation of hazardous materials, or be directly or indirectly
controlled by, or have a financial involvement with, any entity that
manufactures cylinders for use in the transportation of hazardous
materials, except for providing services as an independent inspector.
(c) Application information. Each applicant must submit an
application in conformance with Sec. 107.705 containing the information
prescribed in Sec. 107.705(a). In addition, the application must
contain the following information:
(1) Name and address of each facility where tests and inspections
are to be performed.
(2) Detailed description of the inspection and testing facilities to
be used by the applicant.
(3) Detailed description of the applicant's qualifications and
ability to perform the inspections and to verify the inspections
required by part 178 of this chapter or under the terms of a special
permit issued under this part.
(4) Name, address, and principal business activity of each person
having any direct or indirect ownership interest in the applicant
greater than three percent and any direct or indirect ownership interest
in each subsidiary or division of the applicant.
[[Page 73]]
(5) Name of each individual whom the applicant proposes to employ as
an inspector and who will be responsible for certifying inspection and
test results, and a statement of that person's qualifications.
(6) An identification or qualification number assigned to each
inspector who is supervised by a certifying inspector identified in
paragraph (c)(5) of this section.
(7) A statement that the applicant will perform its functions
independent of the manufacturers and owners of the cylinders.
(8) If the applicant's principal place of business is in a country
other than the United States, the Associate Administrator may approve
the applicant on the basis of an approval issued by the Competent
Authority of the country of manufacture. The Competent Authority must
maintain a current listing of approved IIAs and their identification
marks. The applicant must provide a copy of the designation from the
Competent Authority of that country delegating to the applicant an
approval or designated agency authority for the type of packaging for
which a DOT or UN designation is sought; and
(9) The signature of the person certifying the approval application
and the date on which it was signed.
(d) Facility inspection. Upon the request of the Associate
Administrator, the applicant must allow the Associate Administrator or
the Associate Administrator's designee to inspect the applicant's
facilities and records. The person seeking approval must bear the cost
of the inspection.
(e) After approval, the Associate Administrator may authorize, upon
request, the independent inspection agency to perform other inspections
and functions for which the Associate Administrator finds the applicant
to be qualified. Such additional authorizations will be noted on each
inspection agency's approval documents.
[67 FR 51639, Aug. 8, 2002, as amended at 68 FR 24659, May 8, 2003; 71
FR 33873, June 12, 2006; 78 FR 60750, Oct. 2, 2013]
Sec. 107.805 Approval of cylinder and pressure receptacle requalifiers.
(a) General. A person must meet the requirements of this section to
be approved to inspect, test, certify, repair, or rebuild a cylinder in
accordance with a DOT specification or a UN pressure receptacle under
subpart C of part 178 or subpart C of part 180 of this chapter, or under
the terms of a special permit issued under this part, or a TC, CTC, CRC,
or BTC specification cylinder or tube manufactured in accordance with
the TDG Regulations (IBR, see Sec. 171.7 of this chapter).
(b) Independent Inspection Agency Review. Each applicant must
arrange for an independent inspection agency, approved by the Associate
Administrator pursuant to this subpart, to perform a review of its
inspection or requalification operation. The person seeking approval
must bear the cost of the inspection. A list of approved independent
inspection agencies is available from the Associate Administrator at the
address listed in Sec. 107.705. Assistance in obtaining an approval is
available from the same address.
(c) Application for approval. If the inspection performed by an
independent inspection agency is completed with satisfactory results,
the applicant must submit a letter of recommendation from the
independent inspection agency, an inspection report, and an application
containing the information prescribed in Sec. 107.705(a). In addition,
the application must contain--
(1) The name of the facility manager;
(2) The types of DOT specification or special permit cylinders, UN
pressure receptacles, or TC, CTC, CRC, or BTC specification cylinders or
tubes that will be inspected, tested, repaired, or rebuilt at the
facility;
(3) A certification that the facility will operate in compliance
with the applicable requirements of subchapter C of this chapter; and
(4) The signature of the person making the certification and the
date on which it was signed.
(d) Issuance of requalifier identification number (RIN). The
Associate Administrator issues a RIN as evidence of approval to
requalify DOT specification or special permit cylinders, or TC, CTC,
CRC, or BTC specification cylinders or tubes, or UN pressure receptacles
if it is determined, based on the applicant's submission and other
available information, that the applicant's
[[Page 74]]
qualifications and, when applicable, facility are adequate to perform
the requested functions in accordance with the criteria prescribed in
subpart C of part 180 of this subchapter or TDG Regulations, as
applicable.
(e) Expiration of RIN. Unless otherwise provided in the issuance
letter, an approval expires five years from the date of issuance,
provided the applicant's facility and qualifications are maintained at
or above the level observed at the time of inspection by the independent
inspection agency, or at the date of the certification in the
application for approval for requalifiers only performing inspections
made under Sec. 180.209(g) of this chapter.
(f) Exceptions. The requirements in paragraphs (b) and (c) of this
section do not apply to:
(1) A person who only performs inspections in accordance with Sec.
180.209(g) of this chapter provided the application contains the
following, in addition to the information prescribed in Sec.
107.705(a): Identifies the DOT specification/special permit cylinders to
be inspected; certifies the requalifier will operate in compliance with
the applicable requirements of subchapter C of this chapter; certifies
the persons performing inspections have been trained and have the
information contained in each applicable CGA publication incorporated by
reference in Sec. 171.7 of this chapter applicable to the requalifiers'
activities; and includes the signature of the person making the
certification and the date on which it was signed. Each person must
comply with the applicable requirements in this subpart. In addition,
the procedural requirements in subpart H of this part apply to the
filing, processing and termination of an approval issued under this
subpart; or
(2) A person holding a DOT-issued RIN to perform the requalification
(inspect, test, certify), repair, or rebuild of DOT specification
cylinders, that wishes to perform any of these actions on corresponding
TC, CTC, CRC, or BTC cylinders or tubes may submit an application that,
in addition to the information prescribed in Sec. 107.705(a):
Identifies the TC, CTC, CRC, or BTC specification cylinder(s) or tube(s)
to be inspected; certifies the requalifier will operate in compliance
with the applicable TDG Regulations; certifies the persons performing
requalification have been trained in the functions applicable to the
requalifiers' activities; and includes the signature of the person
making the certification and the date on which it was signed. In
addition, the procedural requirements in subpart H of this part apply to
the filing, processing and termination of an approval issued under this
subpart.
(3) A person holding a certificate of registration issued by
Transport Canada in accordance with the TDG Regulations to perform the
requalification (inspect, test, certify), repair, or rebuild of a TC,
CTC, CRC, or BTC cylinder who performs any of these actions on
corresponding DOT specification cylinders.
(g) Each holder of a current RIN shall report in writing any change
in its name, address, ownership, testing equipment, or management or
personnel performing any function under this section, to the Associate
Administrator (PHH-32) within 20 days of the change.
[67 FR 51639, Aug. 8, 2002, as amended at 68 FR 24659, May 8, 2003; 68
FR 55544, Sept. 26, 2003; 70 FR 56090, Sept. 23, 2005; 70 FR 73162, Dec.
9, 2005; 71 FR 33873, June 12, 2006; 76 FR 56311, Sept. 13, 2011; 82 FR
15833, Mar. 30, 2017]
Sec. 107.807 Approval of non-domestic chemical analyses and tests.
(a) General. A person who seeks to manufacture DOT specification or
special permit cylinders outside the United States must seek an approval
from the Associate Administrator to perform the chemical analyses and
tests of those cylinders outside the United States.
(b) Application for approval. Each applicant must submit an
application containing the information prescribed in Sec. 107.705(a).
In addition, the application must contain--
(1) The name, address, and a description of each facility at which
cylinders are to be manufactured and chemical analyses and tests are to
be performed;
(2) Complete details concerning the dimensions, materials of
construction, wall thickness, water capacity, shape, type of joints,
location and size of openings and other pertinent physical
[[Page 75]]
characteristics of each specification or special permit cylinder for
which approval is being requested, including calculations for cylinder
wall stress and wall thickness, which may be shown on a drawing or on
separate sheets attached to a descriptive drawing;
(3) The name of the independent inspection agency to be used to
certify the analyses and tests and a statement from the agency
indicating that it is independent of and not owned by a cylinder
manufacturer, owner, or distributor; and
(4) The signature of the person making the certification and the
date on which it was signed.
(c) Facility inspections. Upon the request of the Associate
Administrator, the applicant must allow the Associate Administrator or
the Associate Administrator's designee to inspect the applicant's
cylinder manufacturing and testing facilities and records, and must
provide such materials and cylinders for analyses and tests as the
Associate Administrator may specify. The applicant or holder must bear
the cost of the initial and subsequent inspections, analyses, and tests.
[67 FR 51639, Aug. 8, 2002, as amended at 81 FR 35513, June 2, 2016]
Sec. 107.809 Conditions of UN pressure receptacle approvals.
(a) Each approval issued under this subpart contains the following
conditions:
(1) Upon the request of the Associate Administrator, the applicant
or holder must allow the Associate Administrator or the Associate
Administrator's designee to inspect the applicant's pressure receptacle
manufacturing and testing facilities and records, and must provide such
materials and pressure receptacles for analyses and tests as the
Associate Administrator may specify. The applicant or holder must bear
the cost of the initial and subsequent inspections, analyses, and tests.
(2) Each holder must comply with all of the terms and conditions
stated in the approval letter issued under this subpart.
(b) In addition to the conditions specified in Sec. 107.713, an
approval may be denied or if issued, suspended or terminated if the
Competent Authority of the country of manufacture fails to initiate,
maintain or recognize an IIA approved under this subpart; fails to
recognize UN standard packagings manufactured in accordance with this
subchapter; or implements a condition or limitation on United States
citizens or organizations that is not required of its own citizenry.
[71 FR 33874, June 12, 2006]
Sec. Appendix A to Part 107--Standard Operating Procedures for Special
Permits and Approvals
This appendix sets forth the standard operating procedures (SOPs)
for processing an application for a special permit or an approval in
conformance with 49 CFR parts 107 and 171 through 180. It is to be used
by PHMSA for the internal management of its special permit and approval
programs.
The words ``special permit'' and ``approval'' are defined in Sec.
107.1. PHMSA receives applications for: (1) Designation as an approval
or certification agency, (2) a new special permit or approval, renewal
or modification of an existing special permit or an existing approval,
(3) granting of party status to an existing special permit, and (4) in
conformance with Sec. 107.117, emergency processing for a special
permit. Depending on the type of application, the SOP review process
includes several phases, such as Completeness, Publication, Evaluation,
and Disposition.
Special Permit and Approval Evaluation Review Process
----------------------------------------------------------------------------------------------------------------
Non-
Special permit classification Classification Registration
approval approval approval
----------------------------------------------------------------------------------------------------------------
1. Completeness............................. X X X X
2. Publication.............................. X ...............
3. Evaluation...............................
a. Technical................................ X X X
b. Safety Profile........................... X X ............... X
4. Disposition..............................
a. Approval................................. X X X X
b. Denial................................... X X X X
c. Reconsideration/Appeal................... X X X X
----------------------------------------------------------------------------------------------------------------
[[Page 76]]
An approval for assessing an applicant's ability to perform a
function that does not involve classifying a hazardous material is
described as a non-classification approval and certifies that: An
approval holder is qualified to requalify, repair, rebuild, and/or
manufacture cylinders stipulated in the HMR; an agency is qualified to
perform inspections and other functions outlined in an approval and the
HMR; an approval holder is providing an equivalent level of safety or
safety that is consistent with the public interest in the transportation
of hazardous materials outlined in the approval; and a radioactive
package design or material classification fully complies with applicable
domestic or international regulations. An approval for assessing the
hazard class of a material is described as a classification approval and
certifies that explosives, fireworks, chemical oxygen generators, self-
reactive materials, and organic peroxides have been classed for
manufacturing and/or transportation based on requirements stipulated in
the HMR. Registration approvals include the issuance of a unique
identification number used solely as an identifier or in conjunction
with approval holder's name and address, or the issuance of a
registration number that is evidence the approval holder is qualified to
perform an HMR-authorized function, such as visually requalifying
cylinders. This appendix does not include registrations issued under 49
CFR part 107, subpart G.
1. Completeness. PHMSA reviews all special permit and approval
applications to determine if they contain all the information required
under Sec. 107.105 (for a special permit), Sec. 107.117 (for emergency
processing) or Sec. 107.402 (for designation as a certification agency)
or Sec. 107.705 (for an approval). If PHMSA determines an application
does not contain all the information needed to evaluate the safety of
the actions requested in the application, the Associate Administrator
may reject the application. If the application is rejected, PHMSA will
notify the applicant of the deficiencies in writing. An applicant may
resubmit a rejected application as a new application, provided the newly
submitted application contains the information PHMSA needs to make a
determination.
Emergency special permit applications must comply with all the
requirements prescribed in Sec. 107.105 for a special permit
application, and contain sufficient information to determine that the
applicant's request for emergency processing is justified under the
conditions prescribed in Sec. 107.117.
2. Publication. When PHMSA determines an application for a new
special permit or a request to modify an existing special permit is
complete and sufficient, PHMSA publishes a summary of the application in
the Federal Register in conformance with Sec. 107.113(b). This provides
the public an opportunity to comment on a request for a new or a
modification of an existing special permit.
3. Evaluation. The evaluation phase consists of two assessments,
which may be done concurrently, a technical evaluation and a safety
profile evaluation. When applicable, PHMSA consults and coordinates its
evaluation of applications with the following Operating Administrations
(OAs) that share enforcement authority under Federal hazardous material
transportation law: Federal Aviation Administration, Federal Motor
Carrier Safety Administration, Federal Railroad Administration, and
United States Coast Guard. PHMSA also consults other agencies with
hazardous material subject-matter expertise, such as the Nuclear
Regulatory Commission and the Department of Energy.
(a) Technical evaluation. A technical evaluation considers whether
the proposed special permit or approval will achieve a level of safety
at least equal to that required under the HMR or, if a required safety
level does not exist, considers whether the proposed special permit is
consistent with the public interest in that it will adequately protect
against the risks to life and property inherent in the transportation of
hazardous material. For a classification approval, the technical
evaluation is a determination that the application meets the
requirements of the regulations for issuance of the approval. If formal
coordination with another OA is included as part of the evaluation
phase, that OA is responsible for managing this process within the
applicable OA. The OA reviews the application materials and PHMSA's
technical evaluation, and may provide their own evaluation, comments and
recommendations. The OA may also recommend operational controls or
limitations to be incorporated into the special permit or approval to
improve its safety.
(b) Safety profile evaluation. Each applicant for a special permit
or non-classification approval is subject to a safety profile evaluation
to assess if the applicant is fit to conduct the activity authorized by
the special permit or approval application. PHMSA will coordinate the
safety profile evaluations with the appropriate OA if a proposed
activity is specific to a particular mode of transportation, if the
proposed activity will set new precedent or have a significant economic
impact, or if an OA requests participation. PHMSA does not conduct
initial safety profile reviews as part of processing classification
approvals, which include fireworks, explosives, organic peroxides, and
self-reactive materials. Additionally, cylinder approvals and
certification agency approvals do not follow the same minimum safety
profile review model.
(i) Automated Review. An applicant for a special permit or approval
which requires a
[[Page 77]]
safety profile evaluation, but does not include coordination with an OA,
is subject to an automated safety profile review. If the applicant
passes the initial automated review, the applicant is determined to be
fit. If the applicant fails the initial automated review, the applicant
is subject to a safety profile evaluation. An applicant that fails a
safety profile evaluation may be determined to be unfit. To begin this
review, PHMSA or the applicant enters the applicant's information into
the web-based Hazardous Materials Information System (HMIS) or Hazmat
Intelligence Portal (HIP), or other future application processing
technology that provide an integrated information source to identify
hazardous material safety trends through the analysis of incident and
accident information, and provide access to comprehensive information on
hazardous materials incidents, special permits and approvals,
enforcement actions, and other elements that support PHMSA's regulatory
program. PHMSA then screens the applicant to determine if, within the
four years prior to submitting its application, the applicant was
involved in any incident attributable to the applicant or package where
two or more triggers for a safety profile review or five or more
triggers for on-site inspection enforcement case referral events
occurred.
(1) The trigger events are listed in the following table:
------------------------------------------------------------------------
Trigger for on-site inspection
Trigger for safety profile review *
------------------------------------------------------------------------
(1) Any incident that involved a death (1) Evidence that an applicant
or injury;. is at risk of being unable to
comply with the terms of an
application, including those
listed below.
(2) Two or more incidents involving a (2) An on-site inspection at
Sec. 172.504(e) (placarding) Table 1 the recommendation of the
hazardous material; fitness coordinator if the
following criteria applies--
Any incident listed under
automated review in paragraph
3(b)(i) of this appendix is
attributable to the applicant
or package, other than driver
error.
(3) Three or more incidents involving a (3) If, during an inspection,
bulk packaging, or an applicant that evidence is found in the four
is acting as an interstate carrier of years prior to submitting its
hazardous materials under the terms of application that an applicant
the special permit or an approval; or has not implemented sufficient
corrective actions for prior
violations, or is at risk of
being unable to comply with
the terms of an application
for a special permit or
approval, an existing special
permit or approval, or the
HMR, then PHMSA will determine
that the applicant is unfit to
conduct the activities
requested in an application or
authorized special permit or
approval.
(4) Any incident that involved: (4) Incorrect or missing: (a)
Incorrect package selection; leaking Markings, (b) labels, (c)
packages; not following closure placards, or (d) shipping
instructions; failure to test papers.
packages, if applicable; and failure
to secure packages, including
incorrect blocking and/or bracing.
------------------------------------------------------------------------
* The Fitness Coordinator assesses and applies these triggers.
(2) If an applicant is acting as an interstate carrier of hazardous
materials under the terms of the special permit, they will be screened
in an automated manner based upon criteria established by FMCSA, such as
that contained in its Safety and Fitness Electronic Records (SAFER)
system, which consists of interstate carrier data, several states'
intrastate data, interstate vehicle registration data, and may include
operational data such as inspections and crashes.
(ii) Safety profile evaluation. A fitness coordinator, as defined in
Sec. 107.1, conducts a safety profile evaluation of all applicants
meeting any of the criteria listed earlier in this appendix under
``automated review,'' and all applicants whose safety profile
evaluations are subject to coordination with an OA, as described in
introductory paragraph 3(b) of this appendix. In a safety profile
evaluation, PHMSA or the OA performs an in-depth evaluation of the
applicant based upon items the automated review triggered concerning the
applicant's four-year performance and compliance history prior to the
submission of the application. Information considered during this review
may include the applicant's history of prior violations, insufficient
corrective actions, or evidence that the applicant is at risk of being
unable to comply with the terms of an application for an existing
special permit, approval, or the HMR. PHMSA performs the review or
coordinates with the OAs, if necessary, if two or more modes of
transportation are requested in the application, and coordinates this
review with the OA(s) of the applicable mode(s). The applicable OA
performs the review if one mode of transportation is requested in the
application. If necessary, the fitness coordinator will attempt to
contact the applicant for clarifying information. If the information
provided is sufficient, an on-site inspection may not be necessary.
After conducting an evaluation, if the fitness coordinator determines
that the applicant may be unfit to conduct the activities requested in
the application, the coordinator will forward the request and supporting
documentation to PHMSA's Field Operations Division, or a
[[Page 78]]
representative of the Department, such as an authorized Operating
Administration representative, to perform an on-site inspection. After
the safety profile evaluation is completed, if the applicant is not
selected for an on-site inspection, the applicant is determined to be
fit. On-site inspections are not required for fitness determinations
from modal administrations according to their own procedures.
(iii) On-Site Inspection. (A) The factors in paragraph 3(b)(i) and
3(b)(ii) are used as evidence that an applicant is at risk of being
unable to comply with the terms of an application, including those
listed below. PHMSA's Field Operations Division or representative of the
Department, such as an Operating Administration representative, will
conduct an on-site inspection at the recommendation of the fitness
coordinator if one of the following criteria applies:
(1) Any incident listed under automated review in paragraph 3(b)(i)
of this appendix is attributable to the applicant or package, other than
driver error;
(2) Insufficient Corrective Actions, as defined in Sec. 107.1, in
any enforcement case for a period of four years prior to submitting the
application, except when re-inspected with no violations noted; or
(3) Items noted by an IIA on a cylinder requalifier inspection
report, except when re-inspected with no violations noted.
(B) If, during an inspection, the PHMSA investigator or a
representative of the Department finds evidence in the four years prior
to submitting its application that an applicant has not implemented
sufficient corrective actions for prior violations, or is at risk of
being unable to comply with the terms of an application for a special
permit or approval, an existing special permit or approval, or the HMR,
then PHMSA will determine that the applicant is unfit to conduct the
activities requested in an application or authorized special permit or
approval.
4. Disposition. (a) Special Permit. If an application for a special
permit is issued, PHMSA provides the applicant, in writing, with a
special permit and an authorization letter if party status is
authorized.
(b) Approval. If an application for approval is issued, PHMSA
provides the applicant, in writing, with an approval, which may come in
various forms, including:
(1) An ``EX'' approval number for classifying an explosive
(including fireworks; see Sec. Sec. 173.56, 173.124, 173.128, and
173.168(a));
(2) A ``RIN'' (requalification identification number) to uniquely
identify a cylinder requalification, repair, or rebuilding facility (see
Sec. 180.203);
(3) A ``VIN'' (visual identification number) to uniquely identify a
facility that performs an internal or external visual inspection, or
both, of a cylinder in conformance with 49 CFR part 180, subpart C, or
applicable CGA Pamphlet or HMR provision;
(4) An ``M'' number for identifying packaging manufacturers (see
Sec. 178.3); or
(5) A ``CA'' (competent authority) for general approvals (see
Sec. Sec. 107.705, 173.185, and 173.230).
(c) Denial. An application for a special permit or approval may be
denied in whole or in part. For example, if an application contains
sufficient information to successfully complete its technical review but
the Associate Administrator determines the applicant is unfit, the
application will be denied. If an application for a special permit or an
approval is denied, PHMSA provides the applicant with a brief statement,
in writing, of the reasons for denial and the opportunity to request
reconsideration (see Sec. Sec. 107.113(g), 107.402, and 107.709(f)).
(d) Reconsideration and Appeal. (1) Special Permit. If an
application for a special permit is denied, the applicant may request
reconsideration as provided in Sec. 107.123 and, if the reconsideration
is denied, may appeal as provided in Sec. 107.125. Applicants
submitting special permit reconsiderations and appeals must do so in the
same manner as new applications, provided the new submission is
sufficiently complete to make a determination.
(2) Approval. If an application for an approval is denied, the
applicant may request reconsideration as provided in Sec. 107.715 and,
if the reconsideration is denied, may appeal as provided in Sec.
107.717. Applicants submitting approval reconsiderations and appeals
must do so in the same manner as new applications, provided the new
submission is sufficiently complete to make a determination.
[80 FR 54438, Sept. 10, 2015]
PART 109_DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIAL
PROCEDURAL REGULATIONS--Table of Contents
Subpart A_Definitions
Sec.
109.1 Definitions.
Subpart B_Inspections and investigations
109.3 Inspections and investigations.
109.5 Opening of packages.
109.7 Removal from transportation.
109.9 Transportation for examination and analysis.
109.11 Assistance of properly qualified personnel.
109.13 Closing packages/safe resumption of transportation.
109.15 Termination.
109.16 Notification of enforcement measures.
[[Page 79]]
Subpart C_Emergency Orders
109.17 Emergency orders.
109.19 Petitions for review of emergency orders.
109.21 Remedies generally.
Subpart D_Equipment
109.25 Equipment.
Subpart E_Prohibition on Hazardous Materials Operations After Nonpayment
of Penalties
109.101 Prohibition of hazardous materials operations.
109.103 Notice of nonpayment of penalties.
Authority: 49 U.S.C. 5101-5128, 44701; Pub. L. 101-410 Sec. 4 (28
U.S.C. 2461 note); Pub. L. 104-121 Secs. 212-213; Pub. L. 104-134 Sec.
31001; 49 CFR 1.81, 1.97.
Source: 76 FR 11592, Mar. 2, 2011, unless otherwise noted.
Subpart A_Definitions
Sec. 109.1 Definitions.
For purposes of this part, all terms defined in 49 U.S.C. 5102 are
used in their statutory meaning. Other terms used in this part are
defined as follows:
Administrator means the head of any operating administration within
the Department of Transportation, and includes the Administrators of the
Federal Aviation Administration, Federal Motor Carrier Safety
Administration, Federal Railroad Administration, and Pipeline and
Hazardous Materials Safety Administration, to whom the Secretary has
delegated authority in part 1 of this title, and any person within an
operating administration to whom an Administrator has delegated
authority to carry out this part.
Agent of the Secretary or agent means a Federal officer, employee,
or agent authorized by the Secretary to conduct inspections or
investigations under the Federal hazardous material transportation law.
Chief Safety Officer or CSO means the Assistant Administrator of the
Pipeline and Hazardous Materials Safety Administration.
Emergency order means an emergency restriction, prohibition, recall,
or out-of-service order set forth in writing.
Freight container means a package configured as a reusable container
that has a volume of 64 cubic feet or more, designed and constructed to
permit being lifted with its contents intact and intended primarily for
containment of smaller packages (in unit form) during transportation.
Immediately adjacent means a packaging that is in direct contact
with the hazardous material or is otherwise the primary means of
containment of the hazardous material.
Imminent hazard means the existence of a condition relating to
hazardous material that presents a substantial likelihood that death,
serious illness, severe personal injury, or a substantial endangerment
to health, property, or the environment may occur before the reasonably
foreseeable completion date of a formal proceeding begun to lessen the
risk of that death, illness, injury, or endangerment.
In writing means unless otherwise specified, the written expression
of any actions related to this part, rendered in paper or digital
format, and delivered in person; via facsimile, commercial delivery,
U.S. Mail; or electronically.
Objectively reasonable and articulable belief means a belief based
on particularized and identifiable facts that provide an objective basis
to believe or suspect that a package may contain a hazardous material.
Out-of-service order means a written requirement issued by the
Secretary, or a designee, that an aircraft, vessel, motor vehicle,
train, railcar, locomotive, other vehicle, transport unit, transport
vehicle, freight container, portable tank, or other package not be moved
or cease operations until specified conditions have been met.
Packaging means a receptacle and any other components or materials
necessary for the receptacle to perform its containment function in
conformance with the minimum packing requirements of this subchapter.
For radioactive materials packaging, see Sec. 173.403 of subchapter C
of this chapter.
Perishable hazardous material means a hazardous material that is
subject to significant risk of speedy decay, deterioration, or spoilage,
or hazardous materials consigned for medical use, in the prevention,
treatment, or cure of a disease or condition in human beings or animals
where expeditious shipment
[[Page 80]]
and delivery meets a critical medical need.
Properly qualified personnel means a company, partnership,
proprietorship, or individual who is technically qualified to perform
designated tasks necessary to assist an agent in inspecting, examining,
opening, removing, testing, or transporting packages.
Related packages means any packages in a shipment, series or group
of packages that can be traced to a common nexus of facts, including,
but not limited to: The same offeror or packaging manufacturer; the same
hazard communications information (marking, labeling, shipping
documentation); or other reasonable and articulable facts that may lead
an agent to believe such packages are related to a package that may pose
an imminent hazard. Packages that are located within the same trailer,
freight container, unit load device, etc. as a package removed subject
to this enhanced authority without additional facts to substantiate its
nexus to an imminent hazard are not ``related packages'' for purposes of
removal. The related packages must also demonstrate that they may pose
an imminent hazard. They must exhibit a commonality or nexus of origin,
which may include, but are not limited to, a common offeror, package
manufacturer, marking, labeling, shipping documentation, hazard
communications, etc.
Remove means to keep a package from entering the stream of
transportation in commerce; to take a package out of the stream of
transportation in commerce by physically detaining a package that was
offered for transportation in commerce; or stopping a package from
continuing in transportation in commerce.
Safe and expeditious means prudent measures or procedures designed
to minimize delay.
Subpart B_Inspections and Investigations
Sec. 109.3 Inspections and Investigations.
(a) General authority. An Administrator may initiate an inspection
or investigation to determine compliance with Federal hazardous material
transportation law, or a regulation, order, special permit, or approval
prescribed or issued under the Federal hazardous material transportation
law, or any court decree or order relating thereto.
(b) Inspections and investigations. Inspections and investigations
are conducted by designated agents of the Secretary who will, upon
request, present their credentials for examination. Such an agent is
authorized to:
(1) Administer oaths and receive affirmations in any matter under
investigation.
(2) Gather information by any reasonable means, including, but not
limited to, gaining access to records and property (including packages),
interviewing, photocopying, photographing, and video- and audio-
recording in a reasonable manner.
(3) Serve subpoenas for the production of documents or other
tangible evidence if, on the basis of information available to the
agent, the evidence is relevant to a determination of compliance with
the Federal hazardous material transportation law, regulation, order,
special permit, or approval prescribed or issued under the Federal
hazardous material transportation law, or any court decree or order
relating thereto. Service of a subpoena shall be in accordance with the
requirements of the agent's operating administration as set forth in 14
CFR 13.3 (Federal Aviation Administration); 49 CFR 209.7 (Federal
Railroad Administration), 49 U.S.C. 502(d), 5121(a) (Federal Motor
Carrier Safety Administration), and 49 CFR 105.45-105.55 (Pipeline and
Hazardous Materials Safety Administration).
Sec. 109.5 Opening of packages.
(a) In general. Except as provided in paragraph (b):
(1) Stop movement of the package in transportation and gather
information from any person to learn the nature and contents of the
package;
(2) Open any overpack, outer packaging, or other component of the
package that is not immediately adjacent to the hazardous materials
contained in the package and examine the inner packaging(s) or packaging
components.
(b) Perishable hazardous material. To ensure the expeditious
transportation of a package containing a perishable
[[Page 81]]
hazardous material, an agent will utilize appropriate alternatives
before exercising an authority under paragraph (a) of this section.
[76 FR 11592, Mar. 2, 2011, as amended at 78 FR 60763, Oct. 2, 2013]
Sec. 109.7 Removal from transportation.
An agent may remove a package and related packages in a shipment or
a freight container from transportation in commerce for up to forty-
eight (48) hours when the agent has an objectively reasonable and
articulable belief that the packages may pose an imminent hazard. The
agent must record this belief in writing as soon as practicable and
provide written notification stating the reason for removal to the
person in possession.
Sec. 109.9 Transportation for examination and analysis.
(a) An agent may direct a package to be transported to a facility
for examination and analysis when the agent determines that:
(1) Further examination of the package is necessary to evaluate
whether the package conforms to subchapter C of this chapter;
(2) Conflicting information concerning the package exists; or
(3) Additional investigation is not possible on the immediate
premises.
(b) In the event of a determination in accordance with paragraph (a)
of this section, an agent may:
(1) Direct the offeror of the package, or other person responsible
for the package, to have the package transported to a facility where the
material may be examined and analyzed;
(2) Direct the packaging manufacturer or tester of the packaging to
have the package transported to a facility where the packaging may be
tested in accordance with the HMR; or
(3) Direct the carrier to transport the package to a facility
capable of conducting such examination and analysis.
(c) The 48-hour removal period provided in Sec. 109.7 may be
extended in writing by the Administrator pending the conclusion of
examination and analysis under this section.
Sec. 109.11 Assistance of properly qualified personnel.
An agent may authorize properly qualified personnel to assist in the
activities conducted under this part if the agent is not properly
qualified to perform a function that is essential to the agent's
exercise of authority under this part or when safety might otherwise be
compromised by the agent's performance of such a function.
Sec. 109.13 Closing packages and safe resumption of transportation.
(a) No imminent hazard found. If, after an agent exercises an
authority under Sec. 109.5, the agent finds that no imminent hazard
exists, and the package otherwise conforms to applicable requirements in
subchapter C of this chapter, the agent will:
(1) Assist in preparing the package for safe and prompt
transportation, when practicable, by reclosing the package in accordance
with the packaging manufacturer's closure instructions or other
appropriate closure method;
(2) Mark and certify the reclosed package to indicate that it was
opened and reclosed in accordance with this part;
(3) Return the package to the person from whom the agent obtained
it, as soon as practicable; and
(4) For a package containing a perishable hazardous material, assist
in resuming the safe and expeditious transportation of the package as
soon as practicable after determining that the package presents no
imminent hazard.
(b) Imminent hazard found. If an imminent hazard is found to exist
after an agent exercises an authority under Sec. 109.5, the
Administrator or his/her designee may issue an out-of-service order
prohibiting the movement of the package until the package has been
brought into compliance with subchapter C of this chapter. Upon receipt
of the out-of-service order, the person in possession of, or responsible
for, the package must remove the package from transportation until it is
brought into compliance.
(c) Package does not contain hazardous material. If, after an agent
exercises an authority under Sec. 109.5, the agent finds
[[Page 82]]
that a package does not contain a hazardous material, the agent shall
securely close the package, mark and certify the reclosed package to
indicate that it was opened and reclosed, and return the package to
transportation.
(d) Non-compliant package. If, after an agent exercises an authority
under Sec. 109.5, the agent finds that a package contains hazardous
material and does not conform to requirements in subchapter C of this
chapter, but does not present an imminent hazard, the agent will return
the package to the person in possession of the package at the time the
non-compliance is discovered for appropriate corrective action. A non-
compliant package may not continue in transportation until all
identified non-compliance issues are resolved.
Sec. 109.15 Termination.
When the facts disclosed by an investigation indicate that further
action is not warranted under this part at the time, the Administrator
will close the investigation without prejudice to further investigation
and notify the person being investigated of the decision. Nothing herein
precludes civil enforcement action at a later time related to the
findings of the investigation.
Sec. 109.16 Notification of enforcement measures.
In addition to complying with the notification requirements in Sec.
109.7 of this part, an agent, after exercising an authority under this
subpart, will immediately take reasonable measures to notify the offeror
and the person in possession of the package, providing the reason for
the action being taken, the results of any preliminary investigation
including apparent violations of subchapter C of this chapter, and any
further action that may be warranted.
[78 FR 60763, Oct. 2, 2013]
Subpart C_Emergency Orders
Sec. 109.17 Emergency Orders.
(a) Determination of imminent hazard. When an Administrator
determines that a violation of a provision of the Federal hazardous
material transportation law, or a regulation or order prescribed under
that law, or an unsafe condition or practice, constitutes or is causing
an imminent hazard, as defined in Sec. 109.1, the Administrator may
issue or impose emergency restrictions, prohibitions, recalls, or out-
of-service orders, without advance notice or an opportunity for a
hearing. The basis for any action taken under this section shall be set
forth in writing which must--
(1) Describe the violation, condition, or practice that constitutes
or is causing the imminent hazard;
(2) Set forth the terms and conditions of the emergency order;
(3) Be limited to the extent necessary to abate the imminent hazard;
and,
(4) Advise the recipient that, within 20 calendar days of the date
the order is issued, recipient may request review; and that any request
for a formal hearing in accordance with 5 U.S.C. 554 must set forth the
material facts in dispute giving rise to the request for a hearing; and
(5) Set forth the filing and service requirements contained in Sec.
109.19(f), including the address of DOT Docket Operations and of all
persons to be served with the petition for review.
(b) Out-of-service order. An out-of-service order is issued to
prohibit the movement of an aircraft, vessel, motor vehicle, train,
railcar, locomotive, transport unit, transport vehicle, or other
vehicle, or a freight container, portable tank, or other package until
specified conditions of the out-of-service order have been met.
(1) Upon receipt of an out-of-service order, the person in
possession of, or responsible for, the package must remove the package
from transportation until it is brought into compliance with the out-of-
service order.
(2) A package subject to an out-of-service order may be moved from
the place where it was found to present an imminent hazard to the
nearest location where the package can be brought into compliance,
provided that the agent who issued the out-of-service order is notified
before the move.
(3) The recipient of the out-of-service order must notify the
operating administration that issued the order when
[[Page 83]]
the package is brought into compliance.
(4) Upon receipt of an out-of-service order, a recipient may appeal
the decision of the agent issuing the order to PHMSA's Chief Safety
Officer. A petition for review of an out-of-service order must meet the
requirements of Sec. 109.19.
(c) Recalls. PHMSA's Associate Administrator, Office of Hazardous
Materials Safety, may issue an emergency order mandating the immediate
recall of any packaging, packaging component, or container certified,
represented, marked, or sold as qualified for use in the transportation
of hazardous materials in commerce when the continued use of such item
would constitute an imminent hazard. All petitions for review of such an
emergency order will be governed by the procedures set forth at Sec.
109.19.
Sec. 109.19 Petitions for review of emergency orders.
(a) Petitions for review. A petition for review must--
(1) Be in writing;
(2) State with particularity each part of the emergency order that
is sought to be amended or rescinded and include all information,
evidence and arguments in support thereof;
(3) State whether a formal hearing in accordance with 5 U.S.C. 554
is requested, and, if so, the material facts in dispute giving rise to
the request for a hearing; and,
(4) Be filed and served in accordance with Sec. 109.19(f).
(b) Response to the petition for review. An attorney designated by
the Office of Chief Counsel of the operating administration issuing the
emergency order may file and serve, in accordance with Sec. 109.19(f),
a response, including appropriate pleadings, within five calendar days
of receipt of the petition by the Chief Counsel of the operating
administration issuing the emergency order.
(c) Chief Safety Officer Responsibilities--(1) Hearing requested.
Upon receipt of a petition for review of an emergency order that
includes a formal hearing request and states material facts in dispute,
the Chief Safety Officer shall immediately assign the petition to the
Office of Hearings. Unless the Chief Safety Officer issues an order
stating that the petition fails to set forth material facts in dispute
and will be decided under paragraph (c)(2) of this section, a petition
for review including a formal hearing request will be deemed assigned to
the Office of Hearings three calendar days after the Chief Safety
Officer receives it.
(2) No hearing requested. For a petition for review of an emergency
order that does not include a formal hearing request or fails to state
material facts in dispute, the Chief Safety Officer shall issue an
administrative decision on the merits within 30 days of receipt of the
petition. The Chief Safety Officer's decision constitutes final agency
action.
(d) Hearings. Formal hearings shall be conducted by an
Administrative Law Judge assigned by the Chief Administrative Law Judge
of the Office of Hearings. The Administrative Law Judge may:
(1) Administer oaths and affirmations;
(2) Issue subpoenas as provided by the appropriate agency
regulations (49 CFR 209.7, 49 CFR 105.45, 14 CFR 13.3, and 49 U.S.C. 502
and 31133);
(3) Adopt the relevant Federal Rules of Civil Procedure for the
United States District Courts for the procedures governing the hearings
when appropriate;
(4) Adopt the relevant Federal Rules of Evidence for United States
Courts and Magistrates for the submission of evidence when appropriate;
(5) Take or cause depositions to be taken;
(6) Examine witnesses at the hearing;
(7) Rule on offers of proof and receive relevant evidence;
(8) Convene, recess, adjourn or otherwise regulate the course of the
hearing;
(9) Hold conferences for settlement, simplification of the issues,
or any other proper purpose; and,
(10) Take any other action authorized by or consistent with the
provisions of this part and permitted by law that may expedite the
hearing or aid in the disposition of an issue raised therein.
(e) Parties. The petitioner may appear and be heard in person or by
an authorized representative. The operating administration issuing the
emergency
[[Page 84]]
order shall be represented by an attorney designated by its respective
Office of Chief Counsel.
(f) Filing and service. (1) Each petition, pleading, motion, notice,
order, or other document submitted in connection with an order issued
under this subpart must be filed (commercially delivered or submitted
electronically) with: U.S. Department of Transportation, Docket
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New
Jersey Avenue, SE., Washington, DC 20590. All documents filed will be
published on the Department's docket management Web site, http://
www.regulations.gov. The emergency order shall state the above filing
requirements and the address of DOT Docket Operations.
(2) Service. Each document filed in accordance with paragraph (f)(1)
of this section must be concurrently served upon the following persons:
(i) Chief Safety Officer (Attn: Office of Chief Counsel, PHC),
Pipeline and Hazardous Materials Safety Administration, U.S. Department
of Transportation, 1200 New Jersey Avenue, SE., East Building,
Washington, DC 20590 (facsimile: 202-366-7041) (electronic mail:
[email protected]);
(ii) The Chief Counsel of the operating administration issuing the
emergency order;
(iii) If the petition for review requests a formal hearing, the
Chief Administrative Law Judge, U.S. Department of Transportation,
Office of Hearings, M-20, Room E12-320, 1200 New Jersey Avenue, SE.,
Washington, DC 20590 (facsimile: 202-366-7536).
(iv) Service shall be made personally, by commercial delivery
service, or by electronic means if consented to in writing by the party
to be served, except as otherwise provided herein. The emergency order
shall state all relevant service requirements and list the persons to be
served and may be updated as necessary. The emergency order shall also
be published in the Federal Register as soon as practicable after its
issuance.
(3) Certificate of service. Each order, pleading, motion, notice, or
other document shall be accompanied by a certificate of service
specifying the manner in which and the date on which service was made.
(4) The emergency order shall be served by ``hand delivery,'' unless
such delivery is not practicable, or by electronic means if consented to
in writing by the party to be served.
(5) Service upon a person's duly authorized representative, agent
for service, or an organization's president constitutes service upon
that person.
(g) Report and recommendation. The Administrative Law Judge shall
issue a report and recommendation at the close of the record. The report
and recommendation shall:
(1) Contain findings of fact and conclusions of law and the grounds
for the decision based on the material issues of fact or law presented
on the record;
(2) Be served on the parties to the proceeding; and
(3) Be issued no later than 25 days after receipt of the petition
for review by the Chief Safety Officer.
(h) Expiration of order. If the Chief Safety Officer, or the
Administrative Law Judge, where appropriate, has not disposed of the
petition for review within 30 days of receipt, the emergency order shall
cease to be effective unless the Administrator issuing the emergency
order determines, in writing, that the imminent hazard providing a basis
for the emergency order continues to exist. The requirements of such an
extension shall remain in full force and effect pending decision on a
petition for review unless stayed or modified by the Administrator.
(i) Reconsideration. (1) A party aggrieved by the Administrative Law
Judge's report and recommendation may file a petition for
reconsideration with the Chief Safety Officer within one calendar day of
service of the report and recommendation. The opposing party may file a
response to the petition within one calendar day of service of a
petition for reconsideration.
(2) The Chief Safety Officer shall issue a final agency decision
within three calendar days of service of the final pleading, but no
later than 30 days after receipt of the original petition for review.
(3) The Chief Safety Officer's decision on the merits of a petition
for reconsideration constitutes final agency action.
[[Page 85]]
(j) Appellate review. A person aggrieved by the final agency action
may petition for review of the final decision in the appropriate Court
of Appeals for the United States as provided in 49 U.S.C. 5127. The
filing of the petition for review does not stay or modify the force and
effect of the final agency.
(k) Time. In computing any period of time prescribed by this part or
by an order issued by the Administrative Law Judge, the day of filing of
the petition for review or of any other act, event, or default from
which the designated period of time begins to run shall not be included.
The last day of the period so computed shall be included, unless it is a
Saturday, Sunday, or Federal holiday, in which event the period runs
until the end of the next day which is not one of the aforementioned
days.
Sec. 109.21 Remedies generally.
An Administrator may request the Attorney General to bring an action
in the appropriate United States district court seeking temporary or
permanent injunctive relief, punitive damages, assessment of civil
penalties as provided by 49 U.S.C. 5122(a), and any other appropriate
relief to enforce the Federal hazardous material transportation law,
regulation, order, special permit, or approval prescribed or issued
under the Federal hazardous material transportation law.
Subpart D_Equipment
Source: 78 FR 60763, Oct. 2, 2013, unless otherwise noted.
Sec. 109.25 Equipment.
When an agent exercises an authority under subpart B of this part,
the agent shall use the appropriate safety, handling, and other
equipment authorized by his or her operating administration's equipment
requirements for hazardous material inspectors and investigators.
Subpart E_Prohibition on Hazardous Materials Operations After Nonpayment
of Penalties
Source: 79 FR 46199, Aug. 7, 2014, unless otherwise noted.
Sec. 109.101 Prohibition of hazardous materials operations.
(a) Definition of hazardous materials operations. For the purposes
of this subpart, hazardous materials operations means any activity
regulated under the Federal hazardous material transportation law, this
subchapter or subchapter C of this chapter, or an exemption or special
permit, approval, or registration issued under this subchapter or under
subchapter C of this chapter.
(b) Failure to pay civil penalty in full. A respondent that fails to
pay a hazardous material civil penalty in full within 90 days after the
date specified for payment by an order of the Pipeline and Hazardous
Materials Safety Administration, Federal Aviation Administration,
Federal Motor Carrier Safety Administration, or Federal Railroad
Administration is prohibited from conducting hazardous materials
operations and shall immediately cease all hazardous materials
operations beginning on the next day (i.e., the 91st). The prohibition
shall continue until payment of the penalty has been made in full or at
the discretion of the agency issuing the order an acceptable payment
plan has been arranged.
(c) Civil penalties paid in installments. On a case by case basis, a
respondent may be allowed to pay a civil penalty pursuant to a payment
plan, which may consist of installment payments. If the respondent fails
to make an installment payment contained in the payment plan on the
agreed upon schedule, the payment plan shall be null and void and the
full outstanding balance of the civil penalty shall be payable
immediately. A respondent that fails to pay the full outstanding balance
of its civil penalty within 90 days after the date of the missed
installment payment shall be prohibited from conducting hazardous
materials operations beginning on the next day (i.e., the 91st). The
prohibition shall
[[Page 86]]
continue until payment of the outstanding balance of the civil penalty
has been made in full, including any incurred interest or until at the
discretion of the agency issuing the order another acceptable payment
plan has been arranged.
(d) Appeals to Federal Court. If the respondent appeals an agency
order issued pursuant to Sec. 109.103 to a Federal Circuit Court of
Appeals, the terms and payment due date of the order are not stayed
unless the Court so specifies.
(e) Applicability to ticketing. This section does not apply to a
respondent who fails to pay a civil penalty assessed by a ticket issued
pursuant to Sec. 107.310 of this subchapter.
(f) Applicability to debtors. This section does not apply to a
respondent who is unable to pay a civil penalty because the respondent
is a debtor in a case under chapter 11, title 11, United States Code. A
respondent who is a debtor in a case under chapter 11, title 11, United
States Code must provide the following information to the agency
decision maker identified in the original agency order or on its
certificate of service.
(1) The chapter of the Bankruptcy Code under which the bankruptcy
proceeding is filed;
(2) The bankruptcy case number;
(3) The court in which the bankruptcy proceeding was filed; and
(4) Any other information requested by the agency to determine a
debtor's bankruptcy status.
(g) Penalties for prohibited hazardous materials operations. A
respondent that continues to conduct hazardous materials operations in
violation of this section may be subject to additional penalties,
including criminal prosecution pursuant to 49 U.S.C. 5124.
Sec. 109.103 Notice of nonpayment of penalties.
(a) If a full payment of a civil penalty, or an installment payment
as part of agreed upon payment plan, has not been made within 45 days
after the date specified for payment by the final agency order, the
agency may issue a cessation of hazardous materials operations order to
the respondent.
(b) The cessation of hazardous materials operations order issued
under this section shall include the following information:
(1) A citation to the statutory provision or regulation the
respondent was found to have violated and to the terms of the order or
agreement requiring payment;
(2) A statement indicating that if the respondent fails to pay the
full outstanding balance of the civil penalty within 90 days after the
payment due date, the respondent shall be prohibited from conducting any
activity regulated under the Federal hazardous material transportation
law, this subchapter or subchapter C of this chapter, or an exemption or
special permit, approval, or registration issued under this subchapter
or under subchapter C of this chapter;
(3) A statement describing the respondent's options for responding
to the order which will include an option to file an appeal for
reconsideration of the cessation of operations order within 20 days of
receipt of the order; and
(4) A description of the manner in which the respondent can make
payment of any money due the United States as a result of the proceeding
(i.e., the full outstanding balance of the civil penalty).
(c) The cessation of hazardous materials operation order will be
delivered by personal service, unless such service is impossible or
impractical. If personal service is impossible or impractical then
service may be made by certified mail or commercial express service. If
a respondent's principal place of business is in a foreign country, it
will be delivered to the respondent's designated agent (as prepared in
accordance with Sec. 105.40 of this subchapter).
PART 110_HAZARDOUS MATERIALS PUBLIC SECTOR TRAINING AND PLANNING GRANTS--
Table of Contents
Sec.
110.1 Purpose.
110.5 Scope.
110.7 Control Number under the Paperwork Reduction Act.
110.10 Eligibility.
110.20 Definitions.
110.30 Grant application.
110.40 Activities eligible for funding.
110.50 Disbursement of Federal funds.
[[Page 87]]
110.60 Cost sharing for planning and training.
110.70 Financial administration.
110.80 Procurement.
110.90 Grant monitoring, reports, and records retention.
110.100 Enforcement.
110.110 After-grant requirements.
110.120 Deviation from this part.
110.130 Disputes.
Authority: 49 U.S.C. 5101-5127; 49 CFR 1.53.
Source: Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, unless otherwise
noted.
Editorial Note: Nomenclature changes to part 110 appear at 70 FR
56090, Sept. 23, 2005.
Sec. 110.1 Purpose.
This part sets forth procedures for reimbursable grants for public
sector planning and training in support of the emergency planning and
training efforts of States, Indian tribes, and local communities to deal
with hazardous materials emergencies, particularly those involving
transportation. These grants will enhance the implementation of the
Emergency Planning and Community Right-to-Know Act of 1986 (42 U.S.C.
11001).
Sec. 110.5 Scope.
(a) This part applies to States and Indian tribes and contains the
program requirements for public sector training and planning grants to
support hazardous materials emergency planning and training efforts.
(b) The requirements contained in 49 CFR part 18, ``Uniform
Administrative Requirements for Grants and Cooperative Agreements to
State and Local Governments'', apply to grants issued under this part.
(c) Copies of standard forms and OMB circulars referenced in this
part are available from the HMTUSA Grants Manager, Pipeline and
Hazardous Materials Safety Administration, U.S. Department of
Transportation, East Building, 1200 New Jersey Avenue, SE., Washington
DC 20590-0001.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended at 72 FR 55683,
Oct. 1, 2007]
Sec. 110.7 Control Number under the Paperwork Reduction Act.
The Office of Management and Budget control number assigned to
collection of information in Sec. Sec. 110.30, 110.70, 110.80, and
110.90 is 2137-0586.
Sec. 110.10 Eligibility.
This part applies to States and Indian tribes. States may apply for
planning and training grants. Federally-recognized Indian tribes may
apply for training grants.
Sec. 110.20 Definitions.
Unless defined in this part, all terms defined in 49 U.S.C. 5102 are
used in their statutory meaning and all terms defined in 49 CFR part 18
and OMB Circular A-102, with respect to administrative requirements for
grants, are used as defined therein. Other terms used in this part are
defined as follows:
Allowable costs means those costs that are: eligible, reasonable,
necessary, and allocable to the project permitted by the appropriate
Federal cost principles, and approved in the grant.
Associate Administrator means the Associate Administrator for
Hazardous Materials Safety, Pipeline and Hazardous Materials Safety
Administration.
Budget period means the period of time specified in the grant
agreement during which the project manager may expend or obligate
project funds.
Cost review means the review and evaluation of costs to determine
reasonableness, allocability, and allowability.
Indian country means Indian country as defined in 18 U.S.C. 1151.
That section defines Indian country as all land within the limits of any
reservation under the jurisdiction of the U.S. Government,
notwithstanding the issuance of any patent, and, including rights-of-way
running through the reservation; all dependent Indian communities within
the borders of the United States whether within the original or
subsequently acquired territory thereof, and whether within or without
the limits of a State; and all Indian allotments, the Indian titles to
which have not been extinguished, including rights-of-way running
through the same.
Indian tribe means a tribe ``Federally-recognized'' by the Secretary
of the Interior under 25 CFR 272.2.
Local Emergency Planning Committee (LEPC) means a committee
appointed
[[Page 88]]
by the State Emergency Response Commission under section 301(c) of the
Emergency Planning and Community Right-to-Know Act of 1986 (42 U.S.C.
11001(c)) that includes at a minimum, representatives from each of the
following groups or organizations: elected State and local officials;
law enforcement, firefighting, civil defense, first aid, health, local
environmental, hospital, and transportation personnel; broadcast and
print media; community groups; and owners and operators of facilities
subject to the emergency planning requirements.
National curriculum means the curriculum required to be developed
under 49 U.S.C. 5115 and necessary to train public sector emergency
response and preparedness teams, enabling them to comply with
performance standards as stated in 49 U.S.C. 5115(c).
Political subdivision means a county, municipality, city, town,
township, local public authority (including any public and Indian
housing agency under the United States Housing Act of 1937 (42 U.S.C.
1401 et seq.), school district, special district, intrastate district,
council of governments (whether or not incorporated as a nonprofit
corporation under State law), any other regional or interstate
government entity, or any agency or instrumentality of a local
government.
Project means the activities and tasks identified in the grant
agreement.
Project manager means the State or Indian tribal official designated
in a grant as the recipient agency's principal program contact with the
Federal Government.
Project officer means the Federal official designated in a grant as
the program contact with the project manager. The project officer is
responsible for monitoring the project.
Project period means the length of time specified in a grant for
completion of all work associated with that project.
State Emergency Response Commission (SERC) means the State Emergency
Response Commission appointed by the Governor of each State and
Territory under the Emergency Planning and Community Right-to-Know Act
of 1986.
Statement of Work means that portion of a grant that describes the
purpose and scope of activities and tasks to be carried out as part of
the proposed project.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by Amdt. 110-3, 59
FR 49132, Sept. 26, 1994; 66 FR 45377, Aug. 28, 2001]
Sec. 110.30 Grant application.
(a) General. An applicant for a planning or training grant shall use
only the standard application forms approved by the Office of Management
and Budget (OMB) (SF-424 and SF-424A) under the Paperwork Reduction Act
of 1980 (44 U.S.C. 3502). Applicants are required to submit an original
and two copies of the application package to: Grants Manager, Pipeline
and Hazardous Materials Safety Administration, U.S. Department of
Transportation, East Building, 1200 New Jersey Avenue, SE., Washington,
DC 20590-0001. Applications received on or before January 1st and July
1st of each year will be considered in that cycle of the semi-annual
review and award process. An initial round of the review and award
process will consider applications received on or before November 15,
1992. Requests and continuation applications must include an original
and two copies of the affected pages; previously submitted pages with
information that is still current do not have to be resubmitted. The
application must include the following:
(1) Application for Federal Assistance for non-construction programs
(SF-424) and Budget sheets (SF-424A). A single application may be used
for both planning and training if the budgets for each are entered
separately on all budget sheets.
(2) For States, a letter from the Governor designating the State
agency that is authorized to apply for a grant and to provide the
written certifications required to receive a grant.
(3) For Indian tribes, a letter from the tribal government,
governing body, or tribal council to the effect that the applicant is
authorized to apply for a grant and to provide the written
certifications required to receive a grant.
(4) A written statement explaining whether the State or tribe
assesses and collects fees on the transportation of hazardous materials
and whether such assessments or fees are used solely to
[[Page 89]]
carry out purposes related to the transportation of hazardous materials.
(5) A statement designating a project manager and providing the
name, position, address and phone number of that individual who will be
responsible for coordinating the funded activities with other agencies/
organizations.
(6) A project narrative statement of the goals and objectives of the
proposed project, project design, and long range plans. The proposed
grant project and budget periods may be one or more years.
(7) A statement of work in support of the proposed project that
describes and sets priorities for the activities and tasks to be
conducted, the costs associated with each activity, the number and types
of deliverables and products to be completed, and a schedule for
implementation.
(8) A description of the major items of costs needed to implement
the statement of work and a copy of any cost or price analysis if
conducted.
(9) Drug-Free Workplace Certification. The applicant must certify as
specified in appendix C of 49 CFR part 29 that it will comply with the
Drug-Free Workplace Act of 1988 (Pub. L. 100-690, title V, subtitle D;
51 U.S.C. 701 et seq.).
(10) Anti-Lobbying Certification. The applicant must certify as
specified in appendix A of 49 CFR part 20 that no Federal funds will be
expended to pay any person for influencing or attempting to influence an
officer or employee of any agency, a Member of Congress, an officer or
employee of Congress, or an employee of a Member of Congress (section
319 of Pub. L. 101-121, 31 U.S.C. 1352).
(11) Debarment and Suspension Certification. The applicant must
certify as specified in subpart G of 49 CFR part 29 that it will not
make an award or permit any award to any party which is debarred or
suspended or is otherwise excluded from or ineligible for participation
in Federal assistance programs.
(b) Planning. In addition to the requirements specified in paragraph
(a) of this section, eligible State applicants must include the
following in their application package:
(1) A written certification that the State is complying with
sections 301 and 303 of the Emergency Planning and Community Right-to-
Know Act of 1986, including a brief explanation of how compliance has
been achieved.
(2) A written statement specifying the aggregate expenditure of
funds of the State, exclusive of Federal funds, for each of its last
five fiscal years for developing, improving, and implementing emergency
plans under the Emergency Planning and Community Right-to-Know Act of
1986, including an explanation specifying the sources of these funds. A
written certification that the State's aggregate expenditures, as
defined by the State, of funds for this purpose, exclusive of Federal
funds, will not fall below the average level of its expenditures for its
last five fiscal years. The applicant may not claim any of these
expenditures for cost-sharing.
(3) A written statement agreeing to make at least 75 percent of the
Federal funds awarded available to LEPCs and an explanation of how the
applicant intends to make such funds available to them for developing,
improving, or implementing emergency plans.
(4) Designation of a project manager to serve as contact for
coordinating planning funds under this program.
(5) A project narrative statement of the goals and objectives of
each proposed project, including the following:
(i) A background statement describing the applicant's long-term
goals and objectives with respect to:
(A) The current abilities and authorities of the applicant's program
for preparedness planning;
(B) The need to sustain or increase program capability;
(C) Current degree of participation in or intention to assess the
need for a regional hazardous materials emergency response team; and
(D) The impact that the grant will have on the program.
(ii) A discussion of whether the applicant's program currently
knows, or intends to assess, transportation flow patterns of hazardous
materials within the State and between that State and another State.
(iii) A schedule for implementing the proposed grant activities.
(iv) A statement describing the ways in which planning will be
monitored by the project manager.
[[Page 90]]
(v) A statement indicating that all members of the State Emergency
Response Commission were provided the opportunity to review the grant
application.
(c) Training. In addition to the requirements specified in paragraph
(a) of this section, eligible State and Indian tribe applicants must
include the following in their application package:
(1) For a State applicant, a written certification explaining how
the State is complying with sections 301 and 303 of the Emergency
Planning and Community Right-to-Know Act.
(2) A written statement specifying the aggregate expenditure of
funds of the State or Indian tribe, exclusive of Federal funds, for each
of its last five fiscal years for training public sector employees to
respond to accidents and incidents involving hazardous materials,
including an explanation specifying the sources of these funds. A
written certification that the applicant's aggregate expenditure, as
defined by the State or tribe, of funds for this purpose, exclusive of
Federal funds, will not fall below the average level of its expenditures
for its last five fiscal years. The applicant may not claim any of these
expenditures for cost-sharing purposes.
(3) For a State applicant, a written statement agreeing to make at
least 75 percent of the Federal funds awarded available for the purpose
of training public sector employees employed or used by political
subdivisions. A State applicant may elect to pass all or some portion of
the grant on to political subdivisions for this purpose. The applicant
must include a specific explanation of how it intends to meet this
requirement.
(4) Designation of a primary point of contact for coordinating
training funded under this program. Identification of a single
repository for copies of course materials delivered under the grant as
specified in Sec. 110.90 of this part.
(5) A project narrative statement of the long-range goals and
objectives of each proposed project, including the following:
(i) A background statement describing:
(A) The current hazardous materials training program(s);
(B) Training audience, including numbers and levels of training and
accreditation program for each level or criterion required to advance to
the next level;
(C) Estimated total number of persons to be trained under the
proposed project;
(D) The ways in which training grants will support the integrated
delivery of training to meet the needs of individualized geographic and
resource needs and time considerations of local responders. When
appropriate, a statement describing how the proposed project will
accommodate the different training needs for rural versus urban
environments; and
(E) The impact that the grant and the National Curriculum will have
on the program.
(ii) A statement describing how the National Curriculum will be used
or modified to train public sector employees at the local level to
respond to accidents and incidents involving hazardous materials.
(iii) A statement describing the ways in which effectiveness of
training will be monitored by the project manager, including, but not
limited to, examinations, critiques, and instructor evaluations.
(iv) A schedule for implementing the proposed training grant
activities.
(v) A statement indicating that all members of the State or Tribal
Emergency Response Commission were provided the opportunity to review
the grant application.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by Amdt. 110-3, 59
FR 49132, Sept. 26, 1994; 70 FR 73162, Dec. 9, 2005; 72 FR 55683, Oct.
1, 2007]
Sec. 110.40 Activities eligible for funding.
(a) Planning. Eligible State applicants may receive funding for the
following activities:
(1) Development, improvement, and implementation of emergency plans
required under the Emergency Planning and Community Right-to-Know Act of
1986, as well as exercises which test the emergency plan. Enhancement of
emergency plans to include hazard analysis as well as response
procedures for
[[Page 91]]
emergencies involving transportation of hazardous materials, including
radioactive materials.
(2) An assessment to determine flow patterns of hazardous materials
within a State, between a State and another State or Indian country, and
development and maintenance of a system to keep such information
current.
(3) An assessment of the need for regional hazardous materials
emergency response teams.
(4) An assessment of local response capabilities.
(5) Conduct of emergency response drills and exercises associated
with emergency preparedness plans.
(6) Provision of technical staff to support the planning effort.
(7) Additional activities the Associate Administrator deems
appropriate to implement the scope of work for the proposed project plan
and approved in the grant.
(b) Training. Eligible State and Indian tribe applicants may receive
funding for the following activities:
(1) An assessment to determine the number of public sector employees
employed or used by a political subdivision who need the proposed
training and to select courses consistent with the National Curriculum.
(2) Delivery of comprehensive preparedness and response training to
public sector employees. Design and delivery of preparedness and
response training to meet specialized needs. Financial assistance for
trainees and for the trainers, if appropriate, such as tuition, travel
expenses to and from a training facility, and room and board while at
the training facility.
(3) Emergency response drills and exercises associated with
training, a course of study, and tests and evaluation of emergency
preparedness plans.
(4) Expenses associated with training by a person (including a
department, agency, or instrumentality of a State or political
subdivision thereof or an Indian tribe) and activities necessary to
monitor such training including, but not limited to examinations,
critiques and instructor evaluations.
(5) Provision of staff to manage the training effort designed to
result in increased benefits, proficiency, and rapid deployment of local
and regional responders.
(6) Additional activities the Associate Administrator deems
appropriate to implement the scope of work for the proposed project and
approved in the grant.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by 66 FR 45377,
Aug. 28, 2001]
Sec. 110.50 Disbursement of Federal funds.
(a) Preaward expenditures may not be reimbursed.
(b) Reimbursement may not be made for a project plan unless approved
in the grant award.
(c) If a recipient agency seeks additional funds, the amendment
request will be evaluated on the basis of needs, performance and
availability of funds. An existing grant is not a commitment of future
Federal funding.
Sec. 110.60 Cost sharing for planning and training.
(a) The recipient agency must provide 20 percent of the direct and
indirect costs of all activities covered under the grant award program
with non-Federal funds. Recipients may either use cash (hard-match), in-
kind (soft-match) contributions, or a combination of in-kind plus hard-
match to meet this requirement. In-kind (soft-match) contributions are
in addition to the maintenance of effort required of recipients of grant
awards. The types of contributions allowed are as follows:
(1) Any funds from a State, local, or other non-Federal source used
for an eligible activity as defined in Sec. 110.40 in this part.
(2) The dollar equivalent value of an eligible activity as defined
in Sec. 110.40 of this part provided by a State, local, or other non-
Federal source.
(3) The value of participants' salary while attending a planning or
training activity contained in the approved grant application provided
by a State, local, or other non-Federal source.
(4) Additional types of in-kind contributions the Associate
Administrator deems appropriate.
(b) Funds used for matching purposes under any other Federal grant
or cooperative agreement may not be used for matching purposes. The
funds expended
[[Page 92]]
by a recipient agency to qualify for the grant may not be used for cost-
sharing purposes.
(c) Acceptable contributions for matching and cost sharing purposes
must conform to 49 CFR part 18.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by Amdt. 110-3, 59
FR 49132, Sept. 26, 1994; 66 FR 45377, Aug. 28, 2001]
Sec. 110.70 Financial administration.
(a) A State must expend and account for grant funds in accordance
with State laws and procedures for expending and accounting for its own
funds. Fiscal control and accounting procedures of the State, as well as
its subgrantees and cost-type contractors, must be sufficient to:
(1) Permit the preparation of reports required by 49 CFR part 18 and
this part, including the tracing of funds provided for planning to a
level of expenditure adequate to establish that at least 75 percent of
the funds provided were made available to LEPCs for developing,
improving, and implementing emergency plans; and the tracing of funds
provided for training to a level of expenditure adequate to establish
that at least 75 percent of the funds provided were made available for
the purposes of training public sector employees employed or used by
political subdivisions.
(2) Permit the tracing of funds to a level of expenditure adequate
to establish that such funds have not been used in violation of the
restrictions and prohibitions of applicable statutes.
(b) The financial management systems of Indian tribes and any
subgrantees must meet the standards of 49 CFR 18.20, including the
ability to trace funds provided for training to a level of expenditure
adequate to establish that at least 75 percent of the funds provided
were made available for the purposes of training public sector employees
employed or used by political subdivisions.
(c) Advances shall be made to States and Indian tribes consistent
with 49 CFR part 18 and 31 CFR part 205. The Associate Administrator
shall base these advances on demonstrated need, which will be determined
on a case-by-case basis, considering such factors as State/Tribal budget
constraints and reductions in amounts budgeted for hazardous materials
activities. To obtain an advance, a State or Indian tribe must comply
with the following requirements:
(1) A letter from the Governor or Tribal leader or their designee is
required specifying the extenuating circumstances requiring the funding
advance for the grant;
(2) The maximum advance request may not be more than $25,000 for
each State or Indian tribe;
(3) Recipients of advance funding must obligate those funds within 3
months of receipt;
(4) Advances including interest will be deducted from the initial
reimbursement to the State or Indian tribe; and
(5) The State or Indian tribe will have its allocation of current
grant funds reduced and will not be permitted to apply for future grant
funds until the advance is covered by a request for reimbursement. For
example, if $25,000 is advanced for personnel costs, this advance would
be deducted from the initial reimbursement in the year the advance was
made.
(d) To be allowable, costs must be eligible, reasonable, necessary,
and allocable to the approved project in accordance with OMB Circular A-
87 and included in the grant award. Costs incurred prior to the award of
any grant are not allowable. Recipient agencies are responsible for
obtaining audits in accordance with the Single Audit Act of 1984 (31
U.S.C. 7501), 49 CFR part 90, and OMB Circular A-128. Audits shall be
made by an independent auditor in accordance with generally accepted
government auditing standards covering financial and compliance audits.
The Associate Administrator may audit a recipient agency at any time.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by 66 FR 45377,
Aug. 28, 2001]
Sec. 110.80 Procurement.
Project managers shall use procurement procedures and practices
which reflect applicable State laws and regulations and Federal
requirements as specified in 49 CFR 18.36.
[[Page 93]]
Sec. 110.90 Grant monitoring, reports, and records retention.
(a) Grant monitoring. Project managers are responsible for managing
the day-to-day operations of grant, subgrant and contract-supported
activities. Project managers must monitor performance of supported
activities to assure compliance with applicable Federal requirements and
achievement of performance goals. Monitoring must cover each program,
function, activity, or task covered by the grant. Monitoring and
reporting requirements for planning and training are contained in this
part; general grant reporting requirements are specified in 49 CFR
18.40.
(b) Reports. (1) The project manager shall submit a performance
report at the completion of an activity for which reimbursement is being
requested or with a request to amend the grant. The final performance
report is due 90 days after the expiration or termination of the grant.
(2) Project managers shall submit an original and two copies of all
performance reports. Performance reports for planning and training must
include comparison of actual accomplishments to the stated goals and
objectives established for the performance period, and the reasons for
not achieving those goals and objectives, if applicable.
(3) Project managers shall report developments or events that occur
between the required performance reporting dates which have significant
impact upon the planning and training activity such as:
(i) Problems, delays, or adverse conditions which will impair the
ability to meet the objective of the grant; and
(ii) Favorable developments which enable meeting time schedules and
objectives sooner or at less cost than anticipated or producing more
beneficial results than originally planned.
(4) Financial reporting, except as provided in Sec. 110.70 and 49
CFR 18.41, shall be supplied quarterly using Standard Form 270, Request
for Advance or Reimbursement, to report the status of funds. The project
manager shall report separately on planning and training.
(c) Records retention. In accordance with 49 CFR 18.42, all
financial and programmatic records, supporting documents, statistical
records, training materials, and other documents generated under a grant
shall be maintained by the project manager for three years from the date
the project manager submits the final financial status report (SF 269)
or Request for Advance or Reimbursement (SF 270). The project manager
shall designate a repository and single-point of contact for planning
and for training, or both, for these purposes. If any litigation, claim,
negotiation, audit or other action involving the records has been
started before the expiration of the 3-year period, the records must be
retained until completion of the action and resolution of all issues
which arise from it, or until the end of the regular 3-year period,
whichever is later.
Sec. 110.100 Enforcement.
If a recipient agency fails to comply with any term of an award
(whether stated in a Federal statute or regulation, an assurance, a
State plan or application, a notice of award, or elsewhere) a
noncompliance action may be taken as specified in 40 CFR 18.43. The
recipient agency may appeal any such actions as specified in 49 CFR part
18. Costs incurred by the recipient agency during a suspension or after
termination of an award are not allowable unless the Associate
Administrator authorizes it in writing. Grant awards may be terminated
in whole or in part with the consent of the recipient at any agreed upon
effective date, or by the recipient upon written notification.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by 66 FR 45377,
Aug. 28, 2001]
Sec. 110.110 After-grant requirements.
The Associate Administrator will close out the award upon
determination that all applicable administrative actions and all
required work of the grant are complete in accordance with subpart D of
49 CFR part 18. The project manager must submit all financial,
performance, and other reports required as a condition of the grant,
within 90 days after the expiration or termination of the grant. This
time
[[Page 94]]
frame may be extended by the Associate Administrator for Hazardous
Materials Safety for cause.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by 66 FR 45377,
Aug. 28, 2001]
Sec. 110.120 Deviation from this part.
Recipient agencies may request a deviation from the non-statutory
provisions of this part. The Associate Administrator will respond to
such requests in writing. If appropriate, the decision will be included
in the grant agreement. Request for deviations from part 110 must be
submitted to: Grants Manager, Pipeline and Hazardous Materials Safety
Administration, U.S. Department of Transportation, East Building, 1200
New Jersey Avenue, SE., Washington, DC 20590-0001.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by Amdt. 110-3, 59
FR 49132, Sept. 26, 1994; 66 FR 45377, Aug. 28, 2001; 72 FR 55683, Oct.
1, 2007]
Sec. 110.130 Disputes.
Disputes should be resolved at the lowest level possible, beginning
with the project manager and the project officer. If an agreement cannot
be reached, the Administrator, PHMSA, will serve as the dispute
resolution official, whose decision will be final.
[[Page 95]]
SUBCHAPTER B_OIL TRANSPORTATION
PART 130_OIL SPILL PREVENTION AND RESPONSE PLANS--Table of Contents
Sec.
130.1 Purpose.
130.2 Scope.
130.3 General requirements.
130.5 Definitions.
130.11 Communication requirements.
130.21 Packaging requirements.
130.31 Response plans.
130.33 Response plan implementation.
Authority: 33 U.S.C 1321; 49 CFR 1.81 and 1.97.
Source: Amdt. 130-2, 61 FR 30541, June 17, 1996, unless otherwise
noted.
Sec. 130.1 Purpose.
This part prescribes prevention, containment and response planning
requirements of the Department of Transportation applicable to
transportation of oil by motor vehicles and rolling stock.
Sec. 130.2 Scope.
(a) The requirements of this part apply to--
(1) Any liquid petroleum oil in a packaging having a capacity of
3,500 gallons or more; and
(2) Any liquid petroleum or non-petroleum oil in a quantity greater
than 42,000 gallons per packaging.
(b) The requirements of this part have no effect on--
(1) The applicability of the Hazardous Materials Regulations set
forth in subchapter C of this chapter; and
(2) The discharge notification requirements of the United States
Coast Guard (33 CFR part 153) and EPA (40 CFR part 110).
(c) The requirements of this part do not apply to--
(1) Any mixture or solution in which oil is in a concentration by
weight of less than 10 percent.
(2) Transportation of oil by aircraft or vessel.
(3) Any petroleum oil carried in a fuel tank for the purpose of
supplying fuel for propulsion of the transport vehicle to which it is
attached.
(4) Oil transport exclusively within the confines of a non-
transportation-related or terminal facility in a vehicle not intended
for use in interstate or intrastate commerce (see 40 CFR part 112,
appendix A).
(d) The requirements in Sec. 130.31(b) of this part do not apply to
mobile marine transportation-related facilities (see 33 CFR part 154).
Sec. 130.3 General requirements.
No person may offer or accept for transportation or transport oil
subject to this part unless that person--
(a) Complies with this part; and
(b) Has been instructed on the applicable requirements of this part.
Sec. 130.5 Definitions.
In this subchapter: Animal fat means a non-petroleum oil, fat, or
grease derived from animals, not specifically identified elsewhere in
this part.
Contract or other means is:
(1) A written contract with a response contractor identifying and
ensuring the availability of the necessary personnel or equipment within
the shortest practicable time;
(2) A written certification by the owner or operator that the
necessary personnel or equipment can and will be made available by the
owner or operator within the shortest practicable time; or
(3) Documentation of membership in an oil spill response
organization that ensures the owner's or operator's access to the
necessary personnel or equipment within the shortest practicable time.
EPA means the U.S. Environmental Protection Agency.
Liquid means a material that has a vertical flow of over two inches
(50 mm) within a three-minute period, or a material having one gram or
more liquid separation, when determined in accordance with the
procedures specified in ASTM D 4359-84, ``Standard Test Method for
Determining Whether a Material is a Liquid or a Solid,'' 1990 edition,
which is incorporated by reference.
Note: This incorporation by reference has been approved by the
Director of the Federal
[[Page 96]]
Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. A copy
may be obtained from the American Society for Testing and Materials,
1916 Race Street, Philadelphia, PA 19103. Copies may be inspected at the
Office of Hazardous Materials Safety, Office of Hazardous Materials
Standards, Room 8422, DOT headquarters building, 400 7th St., SW,
Washington, DC 20590, or at the National Archives and Records
Administration (NARA). For information on the availability of this
material at NARA, call 202-741-6030, or go to: http://www.archives.gov/
federal_register/code_of_federal_regulations/ibr_locations.html.
Maximum extent practicable means the limits of available technology
and the practical and technical limits on an owner or operator of an
onshore facility in planning the response resources required to provide
the on-water recovery capability and the shoreline protection and
cleanup capability to conduct response activities for a worst-case
discharge of oil in adverse weather.
Non-petroleum oil means any animal fat, vegetable oil or other non-
petroleum oil.
Oil means oil of any kind or in any form, including, but not limited
to, petroleum, fuel oil, sludge, oil refuse, and oil mixed with wastes
other than dredged spoil.
Note: This definition does not include hazardous substances (see 40
CFR part 116).
Other non-petroleum oil means a non-petroleum oil of any kind that
is not an animal fat or vegetable oil.
Packaging means a receptacle and any other components or materials
necessary for the receptacle to perform its containment function in
conformance with the packaging requirements of this part. A
compartmented tank is a single packaging.
Person means an individual, firm, corporation, partnership,
association, State, municipality, commission, or political subdivision
of a State, or any interstate body, as well as a department, agency, or
instrumentality of the executive, legislative or judicial branch of the
Federal Government.
Petroleum oil means any oil extracted or derived from geological
hydrocarbon deposits, including fractions thereof.
Qualified individual means an individual familiar with the response
plan, trained in his or her responsibilities in implementing the plan,
and authorized, on behalf of the owner or operator, to initiate all
response activities identified in the plan, to enter into response-
related contracts and obligate funds for such contracts, and to act as a
liaison with the on-scene coordinator and other responsible officials.
The qualified individual must be available at all times the owner or
operator is engaged in transportation subject to part 130 (alone or in
conjunction with an equally qualified alternate), must be fluent in
English, and must have in his or her possession documentation of the
required authority.
Transports or Transportation means any movement of oil by highway or
rail, and any loading, unloading, or storage incidental thereto.
Vegetable oil means a non-petroleum oil or fat derived from plant
seeds, nuts, kernels or fruits, not specifically identified elsewhere in
this part.
Worst-case discharge means ``the largest foreseeable discharge in
adverse weather conditions,'' as defined at 33 U.S.C. 1321(a)(24). The
largest foreseeable discharge from a motor vehicle or rail car is the
capacity of the cargo container. The term ``maximum potential
discharge,'' used in Sec. 130.31(a), is synonymous with ``worst-case
discharge.''
[Amdt. 130-2, 61 FR 30541, June 17, 1996, as amended by 66 FR 45378,
Aug. 28, 2001; 67 FR 61011, Sept. 27, 2002; 69 FR 18803, Apr. 9, 2004]
Sec. 130.11 Communication requirements.
(a) No person may offer oil subject to this part for transportation
unless that person provides the person accepting the oil for
transportation a document indicating the shipment contains oil.
(b) No person may transport oil subject to this part unless a
readily available document indicating that the shipment contains oil is
in the possession of the transport vehicle operator during
transportation.
(c) A material subject to the requirements of this part need not be
specifically identified as oil when the shipment document accurately
describes the material as: aviation fuel, diesel fuel, fuel oil,
gasoline, jet fuel, kerosene, motor fuel, or petroleum.
[[Page 97]]
Sec. 130.21 Packaging requirements.
Each packaging used for the transportation of oil subject to this
part must be designed, constructed, maintained, closed, and loaded so
that, under conditions normally incident to transportation, there will
be no release of oil to the environment.
Sec. 130.31 Response plans.
(a) No person may transport oil subject to this part unless that
person has a current basic written plan that:
(1) Sets forth the manner of response to discharges that may occur
during transportation;
(2) Takes into account the maximum potential discharge of the
contents from the packaging;
(3) Identifies private personnel and equipment available to respond
to a discharge;
(4) Identifies the appropriate persons and agencies (including their
telephone numbers) to be contacted in regard to such a discharge and its
handling, including the National Response Center; and
(5) For each motor carrier, is retained on file at that person's
principal place of business and at each location where dispatching of
motor vehicles occurs; and for each railroad, is retained on file at
that person's principal place of business and at the dispatcher's
office.
(b) No person may transport an oil subject to this part in a
quantity greater than 1,000 barrels (42,000 gallons) unless that person
has a current comprehensive written plan that:
(1) Conforms with all requirements specified in paragraph (a) of
this section;
(2) Is consistent with the requirements of the National Contingency
Plan (40 CFR part 300) and Area Contingency Plans;
(3) Identifies the qualified individual having full authority to
implement removal actions, and requires immediate communications between
that individual and the appropriate Federal official and the persons
providing spill response personnel and equipment;
(4) Identifies, and ensures by contract or other means the
availability of, private personnel (including address and phone number),
and the equipment necessary to remove, to the maximum extent
practicable, a worst case discharge (including a discharge resulting
from fire or explosion) and to mitigate or prevent a substantial threat
of such a discharge;
(5) Describes the training, equipment testing, periodic unannounced
drills, and response actions of facility personnel, to be carried out
under the plan to ensure the safety of the facility and to mitigate or
prevent the discharge, or the substantial threat of such a discharge;
and
(6) Is submitted, and resubmitted in the event of any significant
change, to the Federal Railroad Administrator (for tank cars), or to the
Federal Highway Administrator (for cargo tanks) at East Building, 1200
New Jersey Avenue, SE., Washington, DC 20590-0001.
(Approved by the Office of Management and Budget under control number
2137-0591)
[Amdt. 130-2, 61 FR 30541, June 17, 1996, as amended at 72 FR 55683,
Oct. 1, 2007; 76 FR 56311, Sept. 13, 2011]
Sec. 130.33 Response plan implementation.
If, during transportation of oil subject to this part, a discharge
occurs--into or on the navigable waters of the United States; on the
adjoining shorelines to the navigable waters; or that may affect natural
resources belonging to, appertaining to, or under the exclusive
management authority of, the United States--the person transporting the
oil shall implement the plan required by Sec. 130.31, in a manner
consistent with the National Contingency Plan, 40 CFR part 300, or as
otherwise directed by the Federal on-scene coordinator.
[[Page 98]]
SUBCHAPTER C_HAZARDOUS MATERIALS REGULATIONS
PART 171_GENERAL INFORMATION, REGULATIONS, AND DEFINITIONS--Table of Contents
Subpart A_Applicability, General Requirements, and North American
Shipments
Sec.
171.1 Applicability of Hazardous Materials Regulations (HMR) to persons
and functions.
171.2 General requirements.
171.3 Hazardous waste.
171.4 Marine pollutants.
171.6 Control numbers under the Paperwork Reduction Act.
171.7 Reference material.
171.8 Definitions and abbreviations.
171.9 Rules of construction.
171.10 Units of measure.
171.11 [Reserved]
171.12 North American Shipments.
171.12a [Reserved]
171.14 [Reserved]
Subpart B_Incident Reporting, Notification, BOE Approvals and
Authorization
171.15 Immediate notice of certain hazardous materials incidents.
171.16 Detailed hazardous materials incident reports.
171.17-171.18 [Reserved]
171.19 Approvals or authorizations issued by the Bureau of Explosives.
171.20 Submission of Examination Reports.
171.21 Assistance in investigations and special studies.
Subpart C_Authorization and Requirements for the Use of International
Transport Standards and Regulations
171.22 Authorization and conditions for the use of international
standards and regulations.
171.23 Requirements for specific materials and packagings transported
under the ICAO Technical Instructions, IMDG Code, Transport
Canada TDG Regulations, or the IAEA Regulations.
171.24 Additional requirements for the use of the ICAO Technical
Instructions.
171.25 Additional requirements for the use of the IMDG Code.
171.26 Additional requirements for the use of the IAEA Regulations.
Authority: 49 U.S.C. 5101-5128, 44701; Pub. L. 101-410 section 4;
Pub. L. 104-134, section 31001; Pub. L. 114-74 section 4 (28 U.S.C. 2461
note); 49 CFR 1.81 and 1.97.
Editorial Note: Nomenclature changes to part 171 appear at 70 FR
56090, Sept. 23, 2005.
Subpart A_Applicability, General Requirements, and North American
Shipments
Sec. 171.1 Applicability of Hazardous Materials Regulations (HMR)
to persons and functions.
Federal hazardous materials transportation law (49 U.S.C. 5101 et
seq.) directs the Secretary of Transportation to establish regulations
for the safe and secure transportation of hazardous materials in
commerce, as the Secretary considers appropriate. The Secretary is
authorized to apply these regulations to persons who transport hazardous
materials in commerce. In addition, the law authorizes the Secretary to
apply these regulations to persons who cause hazardous materials to be
transported in commerce. The law also authorizes the Secretary to apply
these regulations to persons who manufacture or maintain a packaging or
a component of a packaging that is represented, marked, certified, or
sold as qualified for use in the transportation of a hazardous material
in commerce. Federal hazardous material transportation law also applies
to anyone who indicates by marking or other means that a hazardous
material being transported in commerce is present in a package or
transport conveyance when it is not, and to anyone who tampers with a
package or transport conveyance used to transport hazardous materials in
commerce or a required marking, label, placard, or shipping description.
Regulations prescribed in accordance with Federal hazardous materials
transportation law shall govern safety aspects, including security, of
the transportation of hazardous materials that the Secretary considers
appropriate. In 49 CFR 1.53, the Secretary delegated authority to issue
regulations for the safe and secure transportation of hazardous
materials in commerce to the Pipeline and Hazardous Materials Safety
Administrator. The Administrator issues the Hazardous Materials
Regulations (HMR; 49 CFR
[[Page 99]]
parts 171 through 180) under that delegated authority. This section
addresses the applicability of the HMR to packagings represented as
qualified for use in the transportation of hazardous materials in
commerce and to pre-transportation and transportation functions.
(a) Packagings. Requirements in the HMR apply to each person who
manufactures, fabricates, marks, maintains, reconditions, repairs, or
tests a packaging or a component of a packaging that is represented,
marked, certified, or sold as qualified for use in the transportation of
a hazardous material in commerce, including each person under contract
with any department, agency, or instrumentality of the executive,
legislative, or judicial branch of the Federal government who
manufactures, fabricates, marks, maintains, reconditions, repairs, or
tests a packaging or a component of a packaging that is represented,
marked, certified, or sold as qualified for use in the transportation of
a hazardous material in commerce.
(b) Pre-transportation functions. Requirements in the HMR apply to
each person who offers a hazardous material for transportation in
commerce, causes a hazardous material to be transported in commerce, or
transports a hazardous material in commerce and who performs or is
responsible for performing a pre-transportation function, including each
person performing pre-transportation functions under contract with any
department, agency, or instrumentality of the executive, legislative, or
judicial branch of the Federal government. Pre-transportation functions
include, but are not limited to, the following:
(1) Determining the hazard class of a hazardous material.
(2) Selecting a hazardous materials packaging.
(3) Filling a hazardous materials packaging, including a bulk
packaging.
(4) Securing a closure on a filled or partially filled hazardous
materials package or container or on a package or container containing a
residue of a hazardous material.
(5) Marking a package to indicate that it contains a hazardous
material.
(6) Labeling a package to indicate that it contains a hazardous
material.
(7) Preparing a shipping paper.
(8) Providing and maintaining emergency response information.
(9) Reviewing a shipping paper to verify compliance with the HMR or
international equivalents.
(10) For each person importing a hazardous material into the United
States, providing the shipper with timely and complete information as to
the HMR requirements that will apply to the transportation of the
material within the United States.
(11) Certifying that a hazardous material is in proper condition for
transportation in conformance with the requirements of the HMR.
(12) Loading, blocking, and bracing a hazardous materials package in
a freight container or transport vehicle.
(13) Segregating a hazardous materials package in a freight
container or transport vehicle from incompatible cargo.
(14) Selecting, providing, or affixing placards for a freight
container or transport vehicle to indicate that it contains a hazardous
material.
(c) Transportation functions. Requirements in the HMR apply to
transportation of a hazardous material in commerce and to each person
who transports a hazardous material in commerce, including each person
under contract with any department, agency, or instrumentality of the
executive, legislative, or judicial branch of the Federal government who
transports a hazardous material in commerce. Transportation of a
hazardous material in commerce begins when a carrier takes physical
possession of the hazardous material for the purpose of transporting it
and continues until the package containing the hazardous material is
delivered to the destination indicated on a shipping document, package
marking, or other medium, or, in the case of a rail car, until the car
is delivered to a private track or siding. For a private motor carrier,
transportation of a hazardous material in commerce begins when a motor
vehicle driver takes possession of a hazardous
[[Page 100]]
material for the purpose of transporting it and continues until the
driver relinquishes possession of the package containing the hazardous
material at its destination and is no longer responsible for performing
functions subject to the HMR with respect to that particular package.
Transportation of a hazardous material in commerce includes the
following:
(1) Movement. Movement of a hazardous material by rail car,
aircraft, motor vehicle, or vessel (except as delegated by Department of
Homeland Security Delegation No. 0170 at 2(103)).
(2) Loading incidental to movement of a hazardous material. Loading
of packaged or containerized hazardous material onto a transport
vehicle, aircraft, or vessel for the purpose of transporting it,
including blocking and bracing a hazardous materials package in a
freight container or transport vehicle, and segregating a hazardous
materials package in a freight container or transport vehicle from
incompatible cargo, when performed by carrier personnel or in the
presence of carrier personnel. For a bulk packaging, loading incidental
to movement is filling the packaging with a hazardous material for the
purpose of transporting it when performed by carrier personnel or in the
presence of carrier personnel (except as delegated by Department of
Homeland Security Delegation No. 0170 at 2(103)), including
transloading.
(3) Unloading incidental to movement of a hazardous material.
Removing a package or containerized hazardous material from a transport
vehicle, aircraft, or vessel; or for a bulk packaging, emptying a
hazardous material from the bulk packaging after the hazardous material
has been delivered to the consignee when performed by carrier personnel
or in the presence of carrier personnel or, in the case of a private
motor carrier, while the driver of the motor vehicle from which the
hazardous material is being unloaded immediately after movement is
completed is present during the unloading operation. (Emptying a
hazardous material from a bulk packaging while the packaging is on board
a vessel is subject to separate regulations as delegated by Department
of Homeland Security Delegation No. 0170 at 2(103).) Unloading
incidental to movement includes transloading.
(4) Storage incidental to movement of a hazardous material. Storage
of a transport vehicle, freight container, or package containing a
hazardous material by any person between the time that a carrier takes
physical possession of the hazardous material for the purpose of
transporting it until the package containing the hazardous material has
been delivered to the destination indicated on a shipping document,
package marking, or other medium, or, in the case of a private motor
carrier, between the time that a motor vehicle driver takes physical
possession of the hazardous material for the purpose of transporting it
until the driver relinquishes possession of the package at its
destination and is no longer responsible for performing functions
subject to the HMR with respect to that particular package.
(i) Storage incidental to movement includes--
(A) Storage at the destination shown on a shipping document,
including storage at a transloading facility, provided the original
shipping documentation identifies the shipment as a through-shipment and
identifies the final destination or destinations of the hazardous
material; and
(B) A rail car containing a hazardous material that is stored on
track that does not meet the definition of ``private track or siding''
in Sec. 171.8, even if the car has been delivered to the destination
shown on the shipping document.
(ii) Storage incidental to movement does not include storage of a
hazardous material at its final destination as shown on a shipping
document.
(d) Functions not subject to the requirements of the HMR. The
following are examples of activities to which the HMR do not apply:
(1) Storage of a freight container, transport vehicle, or package
containing a hazardous material at an offeror facility prior to a
carrier taking possession of the hazardous material for movement in
transportation in commerce or, for a private motor carrier, prior to a
motor vehicle driver
[[Page 101]]
taking physical possession of the hazardous material for movement in
transportation in commerce.
(2) Unloading of a hazardous material from a transport vehicle or a
bulk packaging performed by a person employed by or working under
contract to the consignee following delivery of the hazardous material
by the carrier to its destination and departure from the consignee's
premises of the carrier's personnel or, in the case of a private
carrier, departure of the driver from the unloading area.
(3) Storage of a freight container, transport vehicle, or package
containing a hazardous material after its delivery by a carrier to the
destination indicated on a shipping document, package marking, or other
medium, or, in the case of a rail car, storage of a rail car on private
track.
(4) Rail and motor vehicle movements of a hazardous material
exclusively within a contiguous facility boundary where public access is
restricted, except to the extent that the movement is on or crosses a
public road or is on track that is part of the general railroad system
of transportation, unless access to the public road is restricted by
signals, lights, gates, or similar controls.
(5) Transportation of a hazardous material in a motor vehicle,
aircraft, or vessel operated by a Federal, state, or local government
employee solely for noncommercial Federal, state, or local government
purposes.
(6) Transportation of a hazardous material by an individual for non-
commercial purposes in a private motor vehicle, including a leased or
rented motor vehicle.
(7) Any matter subject to the postal laws and regulations of the
United States.
(e) Requirements of other Federal agencies. Each facility at which
pre-transportation or transportation functions are performed in
accordance with the HMR may be subject to applicable standards and
regulations of other Federal agencies.
(f) Requirements of state and local government agencies. (1) Under
49 U.S.C. 5125, a requirement of a state, political subdivision of a
state, or an Indian tribe is preempted, unless otherwise authorized by
another Federal statute or DOT issues a waiver of preemption, if--
(i) Complying with both the non-Federal requirement and Federal
hazardous materials transportation law, the regulations issued under
Federal hazardous material transportation law or a hazardous material
transportation security regulation or directive issued by the Secretary
of Homeland Security is not possible;
(ii) The non-Federal requirement, as applied or enforced, is an
obstacle to accomplishing and carrying out Federal hazardous materials
transportation law, the regulations issued under Federal hazardous
material transportation law, or a hazardous material transportation
security regulation or directive issued by the Secretary of Homeland
Security;
(iii) The non-Federal requirement is not substantively the same as a
provision of Federal hazardous materials transportation law, the
regulations issued under Federal hazardous material transportation law,
or a hazardous material transportation security regulation or directive
issued by the Secretary of Homeland Security with respect to--
(A) The designation, description, and classification of hazardous
material;
(B) The packing, repacking, handling, labeling, marking, and
placarding of hazardous material;
(C) The preparation, execution, and use of shipping documents
related to hazardous material and requirements related to the number,
contents, and placement of those documents;
(D) The written notification, recording, and reporting of the
unintentional release of hazardous material; or
(E) The design, manufacturing, fabricating, marking, maintenance,
reconditioning, repairing, or testing of a package or container
represented, marked, certified, or sold as qualified for use in
transporting hazardous material.
(iv) A non-Federal designation, limitation or requirement on highway
routes over which hazardous material may or may not be transported does
not comply with the regulations in subparts C and D of part 397 of this
title; or
[[Page 102]]
(v) A fee related to the transportation of a hazardous material is
not fair or is used for a purpose that is not related to transporting
hazardous material, including enforcement and planning, developing, and
maintaining a capability for emergency response.
(2) Subject to the limitations in paragraph (f)(1) of this section,
each facility at which functions regulated under the HMR are performed
may be subject to applicable laws and regulations of state and local
governments and Indian tribes.
(3) The procedures for DOT to make administrative determinations of
preemption are set forth in subpart E of part 397 of this title with
respect to non-Federal requirements on highway routing (paragraph
(f)(1)(iv) of this section) and in subpart C of part 107 of this chapter
with respect to all other non-Federal requirements.
(g) Penalties for noncompliance. Each person who knowingly violates
a requirement of the Federal hazardous material transportation law, an
order issued under Federal hazardous material transportation law,
subchapter A of this chapter, or a special permit or approval issued
under subchapter A or C of this chapter is liable for a civil penalty of
not more than $78,376 for each violation, except the maximum civil
penalty is $182,877 if the violation results in death, serious illness,
or severe injury to any person or substantial destruction of property.
There is no minimum civil penalty, except for a minimum civil penalty of
$471 for a violation relating to training.
[68 FR 61937, Oct. 30, 2003; 70 FR 20031, Apr. 15, 2005, as amended at
70 FR 73162, Dec. 9, 2005; 71 FR 8488, Feb. 17, 2006; 71 FR 44931, Aug.
8, 2006; 74 FR 68702, Dec. 29, 2009; 75 FR 53596, Sept. 1, 2010; 78 FR
22800, Apr. 17, 2013; 81 FR 42268, June 29, 2016; 82 FR 18400, Apr. 19,
2017]
Sec. 171.2 General requirements.
(a) Each person who performs a function covered by this subchapter
must perform that function in accordance with this subchapter.
(b) Each person who offers a hazardous material for transportation
in commerce must comply with all applicable requirements of this
subchapter, or an exemption or special permit, approval, or registration
issued under this subchapter or under subchapter A of this chapter.
There may be more than one offeror of a shipment of hazardous materials.
Each offeror is responsible for complying with the requirements of this
subchapter, or an exemption or special permit, approval, or registration
issued under this subchapter or subchapter A of this chapter, with
respect to any pre-transportation function that it performs or is
required to perform; however, each offeror is responsible only for the
specific pre-transportation functions that it performs or is required to
perform, and each offeror may rely on information provided by another
offeror, unless that offeror knows or, a reasonable person, acting in
the circumstances and exercising reasonable care, would have knowledge
that the information provided by the other offeror is incorrect.
(c) Each person who performs a function covered by or having an
effect on a specification or activity prescribed in part 178, 179, or
180 of this subchapter, an approval issued under this subchapter, or an
exemption or special permit issued under subchapter A of this chapter,
must perform the function in accordance with that specification,
approval, an exemption or special permit, as appropriate.
(d) No person may offer or accept a hazardous material for
transportation in commerce or transport a hazardous material in commerce
unless that person is registered in conformance with subpart G of part
107 of this chapter, if applicable.
(e) No person may offer or accept a hazardous material for
transportation in commerce unless the hazardous material is properly
classed, described, packaged, marked, labeled, and in condition for
shipment as required or authorized by applicable requirements of this
subchapter or an exemption or special permit, approval, or registration
issued under this subchapter or subchapter A of this chapter.
(f) No person may transport a hazardous material in commerce unless
the hazardous material is transported in accordance with applicable
requirements of this subchapter, or an exemption or special permit,
approval, or registration issued under this subchapter
[[Page 103]]
or subchapter A of this chapter. Each carrier who transports a hazardous
material in commerce may rely on information provided by the offeror of
the hazardous material or a prior carrier, unless the carrier knows or,
a reasonable person, acting in the circumstances and exercising
reasonable care, would have knowledge that the information provided by
the offeror or prior carrier is incorrect.
(g) No person may represent, mark, certify, sell, or offer a
packaging or container as meeting the requirements of this subchapter
governing its use in the transportation of a hazardous material in
commerce unless the packaging or container is manufactured, fabricated,
marked, maintained, reconditioned, repaired, and retested in accordance
with the applicable requirements of this subchapter. No person may
represent, mark, certify, sell, or offer a packaging or container as
meeting the requirements of an exemption, a special permit, approval, or
registration issued under this subchapter or subchapter A of this
chapter unless the packaging or container is manufactured, fabricated,
marked, maintained, reconditioned, repaired, and retested in accordance
with the applicable requirements of the exemption, special permit,
approval, or registration issued under this subchapter or subchapter A
of this chapter. The requirements of this paragraph apply whether or not
the packaging or container is used or to be used for the transportation
of a hazardous material.
(h) The representations, markings, and certifications subject to the
prohibitions of paragraph (g) of this section include:
(1) Specification identifications that include the letters ``ICC'',
``DOT'', ``TC'', ``CTC'', ``CRC'', ``BTC'', ``MC'', or ``UN'';
(2) Exemption, special permit, approval, and registration numbers
that include the letters ``DOT'', ``EX'', ``M'', or ``R''; and
(3) Test dates associated with specification, registration,
approval, retest, exemption, or special permit markings indicating
compliance with a test or retest requirement of the HMR, or an
exemption, special permit, approval, or registration issued under the
HMR or under subchapter A of this chapter.
(i) No person may certify that a hazardous material is offered for
transportation in commerce in accordance with the requirements of this
subchapter unless the hazardous material is properly classed, described,
packaged, marked, labeled, and in condition for shipment as required or
authorized by applicable requirements of this subchapter or an exemption
or special permit, approval, or registration issued under this
subchapter or subchapter A of this chapter. Each person who offers a
package containing a hazardous material for transportation in commerce
in accordance with the requirements of this subchapter or an exemption
or special permit, approval, or registration issued under this
subchapter or subchapter A of this chapter, must assure that the package
remains in condition for shipment until it is in the possession of the
carrier.
(j) No person may, by marking or otherwise, represent that a
container or package for transportation of a hazardous material is safe,
certified, or in compliance with the requirements of this chapter unless
it meets the requirements of all applicable regulations issued under
Federal hazardous material transportation law.
(k) No person may, by marking or otherwise, represent that a
hazardous material is present in a package, container, motor vehicle,
rail car, aircraft, or vessel if the hazardous material is not present.
(l) No person may alter, remove, deface, destroy, or otherwise
unlawfully tamper with any marking, label, placard, or description on a
document required by Federal hazardous material transportation law or
the regulations issued under Federal hazardous material transportation
law. No person may alter, deface, destroy, or otherwise unlawfully
tamper with a package, container, motor vehicle, rail car, aircraft, or
vessel used for the transportation of hazardous materials.
(m) No person may falsify or alter an exemption or special permit,
approval, registration, or other grant of authority issued under this
subchapter or subchapter A of this chapter. No person may offer a
hazardous material for
[[Page 104]]
transportation or transport a hazardous material in commerce under an
exemption or special permit, approval, registration or other grant of
authority issued under this subchapter or subchapter A of this chapter
if such grant of authority has been altered without the consent of the
issuing authority. No person may represent, mark, certify, or sell a
packaging or container under an exemption or special permit, approval,
registration or other grant of authority issued under this subchapter or
subchapter A of this chapter if such grant of authority has been altered
without the consent of the issuing authority.
[68 FR 61937, Oct. 30, 2003, as amended at 70 FR 43643, July 28, 2005;
70 FR 73162, Dec. 9, 2005; 82 FR 15833, Mar. 30, 2017]
Sec. 171.3 Hazardous waste.
(a) No person may offer for transportation or transport a hazardous
waste (as defined in Sec. 171.8 of this subchapter) in interstate or
intrastate commerce except in accordance with the requirements of this
subchapter.
(b) No person may accept for transportation, transport, or deliver a
hazardous waste for which a manifest is required unless that person:
(1) Has marked each motor vehicle used to transport hazardous waste
in accordance with Sec. 390.21 of this title even though placards may
not be required;
(2) Complies with the requirements for manifests set forth in Sec.
172.205 of this subchapter; and
(3) Delivers, as designated on the manifest by the generator, the
entire quantity of the waste received from the generator or a
transporter to:
(i) The designated facility or, if not possible, to the designated
alternate facility;
(ii) The designated subsequent carrier; or
(iii) A designated place outside the United States.
Note: Federal law specifies penalties up to $250,000 fine for an
individual and $500,000 for a company and 5 years imprisonment for the
willful discharge of hazardous waste at other than designated
facilities. 49 U.S.C. 5124.
(c) If a discharge of hazardous waste or other hazardous material
occurs during transportation, and an official of a State or local
government or a Federal agency, acting within the scope of his official
responsibilities, determines that immediate removal of the waste is
necessary to prevent further consequence, that official may authorize
the removal of the waste without the preparation of a manifest. [Note:
In such cases, EPA does not require carriers to have EPA identification
numbers.]
Note 1: EPA requires shippers (generators) and carriers
(transporters) of hazardous wastes to have identification numbers which
must be displayed on hazardous waste manifests. See 40 CFR parts 262 and
263. (Identification number application forms may be obtained from EPA
regional offices.)
Note 2: In 40 CFR part 263, the EPA sets forth requirements for the
cleanup of releases of hazardous wastes.
[Amdt. 171-53, 45 FR 34586, May 22, 1980, as amended by Amdt. 171-53, 45
FR 74648, Nov. 10, 1980; Amdt. 171-78, 49 FR 10510, Mar. 20, 1984; Amdt.
171-107, 54 FR 40068, Sept. 29, 1989; Amdt. 171-111, 55 FR 52466, Dec.
21, 1990; 56 FR 66157, Dec. 20, 1991; Amdt. 171-2, 59 FR 49132, Sept.
26, 1994; Amdt. 171-141, 61 FR 21102, May 9, 1996; 73 FR 57004, Oct. 1,
2008]
Sec. 171.4 Marine pollutants.
(a) Except as provided in paragraph (c) of this section, no person
may offer for transportation or transport a marine pollutant, as defined
in Sec. 171.8, in intrastate or interstate commerce except in
accordance with the requirements of this subchapter.
(b) The requirements of this subchapter for the transportation of
marine pollutants are based on the provisions of Annex III of the 1973
International Convention for Prevention of Pollution from Ships, as
modified by the Protocol of 1978 (MARPOL 73/78).
(c) Exceptions. (1) Except when all or part of the transportation is
by vessel, the requirements of this subchapter specific to marine
pollutants do not apply to non-bulk packagings transported by motor
vehicle, rail car or aircraft.
(2) Single or combination packagings containing a net quantity per
single or inner packaging of 5 L or less for liquids or having a net
mass of 5 kg or less for solids, are not subject to any other
requirements of this subchapter
[[Page 105]]
provided the packagings meet the general requirements in Sec. Sec.
173.24 and 173.24a. This exception does not apply to marine pollutants
that are a hazardous waste or a hazardous substance. In the case of
marine pollutants also meeting the criteria for inclusion in another
hazard class, all provisions of this subchapter relevant to any
additional hazards continue to apply.
[Amdt. 171-116, 57 FR 52934, Nov. 5, 1993, as amended by Amdt. 107-39,
61 FR 51337, Oct. 1, 1996; 80 FR 1114, Jan. 8, 2015]
Sec. 171.6 Control numbers under the Paperwork Reduction Act.
(a) Purpose and scope. This section collects and displays the
control numbers assigned to the HMR collections of information by the
Office of Management and Budget (OMB) under the Paperwork Reduction Act
of 1995. This section complies with the requirements of 5 CFR 1320.7(f),
1320.12, 1320.13 and 1320.14 (OMB regulations implementing the Paperwork
Reduction Act of 1995) for the display of control numbers assigned by
OMB to collections of information of the HMR.
(b) OMB control numbers. The table in paragraph (b)(2) of this
section sets forth the control numbers assigned to collection of
information in the HMR by the Office of Management and Budget (OMB)
under the Paperwork Reduction Act of 1995.
(1) Column 1 lists the OMB control number assigned to the HMR
collections of information. Column 2 contains the Report Title of the
approved collection of information. Column 3 lists the part(s) or
section(s) in 49 CFR identified or described in the collection of
information.
(2) Table.
------------------------------------------------------------------------
Title 49 CFR part or
section where
Current OMB control No. Title identified and
described
------------------------------------------------------------------------
2137-0014................. Cargo Tank Sec. Sec. 107.503,
Specification 107.504, 178.320,
Requirements. 178.337, 178.338,
178.345, 180.407,
180.409, 180.413,
180.417.
2137-0018................. Inspection and Sec. Sec. 173.24,
Testing of Portable 173.32, 178.3,
Tanks and 178.255, 178.273,
Intermediate Bulk 178.274, 178.703,
Containers. 178.801, 180.352,
180.605.
2137-0022................. Testing, Inspection, Sec. Sec. 173.5b,
and Marking 173.302a, 173.303,
Requirements for 173.304, 173.309,
Cylinders. 178.2, 178.3,
178.35, 178.44,
178.45, 178.46,
178.57, 178.59,
178.60, 178.61,
178.68, 180.205,
180.207, 180.209,
180.211, 180.213,
180.215, 180.217,
appendix C to part
180.
2137-0034................. Hazardous Materials Sec. Sec. 172.200,
Shipping Papers and 172.201, 172.202,
Emergency Response 172.203, 172.204,
Information. 172.505, 172.600,
172.602, 172.604,
172.606, 173.6,
173.7, 173.22,
173.56, 174.24,
174.26, 174.114,
175.30, 175.31,
175.33, 176.24,
176.27, 176.30,
176.36, 176.89,
177.817.
2137-0039................. Hazardous Materials Sec. Sec. 171.15,
Incidents Reports. 171.16, 171.21.
2137-0051................. Rulemaking and Sec. Sec. 105.30,
Special Permit 105.40, 106.95,
Petitions. 106.110, 107.105,
107.107, 107.109,
107.113, 107.117,
107.121, 107.123,
107.125, 107.205,
107.211, 107.215,
107.217, 107.219,
107.221, 107.223.
2137-0510................. RAM Transportation Part 173, subpart I,
Requirements. Sec. Sec. 173.22,
173.411, 173.415,
173.416, 173.417,
173.457, 173.471,
173.472, 173.473,
173.476.
2137-0542................. Flammable Cryogenic Sec. Sec. 173.318,
Liquids. 177.816, 177.840,
180.405.
[[Page 106]]
2137-0557................. Approvals for Sec. Sec. 107.402,
Hazardous Materials 107.403, 107.405,
107.502, 107.503,
107.705, 107.713,
107.715, 107.717,
107.803, 107.805,
107.807, 110.30,
172.101, 172.102,
Special Provisions
19, 26, 53, 55, 60,
105, 118, 121, 125,
129, 131, 133, 136,
B45, B55, B61, B69,
B77, B81, N10, N72,
173.2a, 173.4,
173.7, 173.21,
173.22, 173.24,
173.31, 173.38,
173.51, 173.56,
173.58, 173.59,
173.124, 173.128,
173.159, 173.166,
173.171, 173.214,
173.222, 173.224,
173.225, 173.245,
173.301, 173.305,
173.306, 173.314,
173.315, 173.316,
173.318, 173.334,
173.340, 173.411,
173.433, 173.457,
173.471, 173.472,
173.476, 174.50,
174.63, 175.8,
175.85, 175.701,
175.703, 176.168,
176.340, 176.704,
178.3, 178.35,
178.47, 178.53,
178.273, 178.274,
178.503, 178.509,
178.605, 178.606,
178.608, 178.801,
178.813, 180.213.
2137-0559................. (Rail Carriers and Sec. Sec. 172.102,
Tank Car Tank Special provisions:
Requirements) B45, B46, B55, B61,
Requirements for B69, B77, B78, B81;
Rail Tank Car Tanks-- 173.10, 173.31,
Transportation of 174.20, 174.50,
Hazardous Materials 174.63, 174.104,
by Rail.. 174.114, 174.204,
179.3, 179.4, 179.5,
179.6, 179.7,
179.11, 179.18,
179.22, 179.100-9,
179.100-12, 179.100-
13, 179.100-16,
179.100-17, 179.102-
4, 179.102-17,
179.103-1, 179.103-
2, 179.103-3,
179.103-5, 179.200-
10, 179.200-14,
179.200-15, 179.200-
16, 179.200-17,
179.200-19, 179.201-
3, 179.201-8,
179.201-9, 179.220-
4, 179.220-7,
179.220-8, 179.220-
13, 179.220-15,
179.220-17, 179.220-
18, 179.220-20,
179.220-22, 179.300-
3, 179.300-7,
179.300-9, 179.300-
12, 179.300-13,
179.300-15, 179.300-
20, 179.400-3,
179.400-4, 179.400-
11, 179.400-13,
179.400-16, 179.400-
17, 179.400-19,
179.400-20, 179.500-
5, 179.500-8,
179.500-12, 179.500-
18, 180.505,
180.509, 180.515,
180.517.
2137-0572................. Testing requirements Sec. Sec. 173.168,
for non-bulk 178.2, 178.601,
packages. appendix C to part
178, appendix D to
part 178.
2137-0582................. Container Sec. Sec. 176.27,
Certification 176.172.
Statement.
2137-0586................. Hazardous Materials Part 110.
Public Sector
Training and
Planning Grants.
2137-0591................. Response Plans for Part 130.
Shipments of Oil.
2137-0595................. Cargo Tank Motor Sec. Sec. 173.315,
Vehicles in 178.337-8, 178.337-
Liquefied Compressed 9, 180.405, 180.416.
Gas Service.
2137-0612................. Hazardous Materials Part 172, subpart I,
Security Plans. Sec. Sec.
172.800, 172.802,
172.804.
2137-0613................. Subsidiary Hazard Sec. Sec. 172.202,
Class and Number/ 172.203
Type of Packagings.
2137-0620................. Inspection and Part 173, subpart A,
Testing of Meter Sec. 173.5a.
Provers.
2137-0621................. Requirements for Sec. Sec. 173.301,
United Nations (UN) 173.304, 173.304b,
Cylinders. 178.69, 178.70,
178.74, 178.75,
180.207, 180.209,
180.212, 180.215,
180.217.
------------------------------------------------------------------------
[Amdt. 171-111, 56 FR 66157, Dec. 20, 1991]
Editorial Note: For Federal Register citations affecting Sec.
171.6, see the List of CFR Sections Affected, which appears in the
Finding Aids section of the printed volume and at www.fdsys.gov.
Sec. 171.7 Reference material.
(a) Matter incorporated by reference--(1) General. Certain material
is incorporated by reference into subchapters A, B, and C with the
approval of the Director of the Federal Register under 5
[[Page 107]]
U.S.C. 552(a) and 1 CFR part 51. To enforce any edition other than that
specified in this section, PHMSA must publish a document in the Federal
Register and the material must be available to the public. Matters
referenced by footnote are included as part of the regulations of this
subchapter.
(2) Accessibility of materials. All incorporated matter is available
for inspection at:
(i) The Office of Hazardous Materials Safety, Office of Hazardous
Materials Standards, East Building, PHH-10, 1200 New Jersey Avenue SE.,
Washington, DC 20590-0001. For information on the availability of this
material at PHH-10, call 1-800-467-4922, or go to: http://
www.phmsa.dot.gov; and
(ii) The National Archives and Records Administration (NARA). For
information on the availability of this material at NARA, call 202-741-
6030, or go to: http://www.archives.gov/federal_register/
code_of_federal_regulations/ibr_locations.html.
(b) Air Transport Association of America, 1301 Pennsylvania Avenue
NW., Washington, DC 20004-1707.
(1) ATA Specification No. 300 Packaging of Airline Supplies,
Revision 19, July 31, 1996, into Sec. 172.102.
(2) [Reserved]
(c) The Aluminum Association, 1525 Wilson Blvd., Suite 6000,
Arlington, VA 22209, telephone 703-358-2960, http://www.aluminum.org.
(1) Aluminum Standards and Data, Seventh Edition, June 1982, into
Sec. Sec. 172.102; 178.65.
(2) Welding Aluminum: Theory and Practice, 2002 Fourth Edition, into
Sec. 178.68.
(d) American National Standards Institute, Inc., 25 West 43rd
Street, New York, NY 10036.
(1) ANSI/ASHRAE 15-94, Safety Code for Mechanical Refrigeration,
1944, into Sec. Sec. 173.306; 173.307.
(2) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 1971
Edition, into Sec. Sec. 173.417; 173.420.
(3) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 1982
Edition, into Sec. Sec. 173.417; 173.420.
(4) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 1987
Edition, into Sec. Sec. 173.417; 173.420.
(5) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 1990
Edition, into Sec. Sec. 173.417; 173.420.
(6) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 1995
Edition, into Sec. Sec. 173.417; 173.420.
(7) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 2001
Edition, into Sec. Sec. 173.417; 173.420.
(e) American Petroleum Institute, 1220 L Street NW., Washington, DC
20005-4070.
(1) API Recommended Practice Closures of Underground Petroleum
Storage Tanks, 3rd Edition, March 1996, into Sec. 172.102.
(2) [Reserved]
(f) American Pyrotechnics Association (APA), P.O. Box 30438,
Bethesda, MD 20824, (301) 907-8181, www.americanpyro.com.
(1) APA Standard 87-1, Standard for Construction and Approval for
Transportation of Fireworks, Novelties, and Theatrical Pyrotechnics,
December 1, 2001 version into Sec. 173.56.
(2) [Reserved]
(g) The American Society of Mechanical Engineers (ASME), 150 Clove
Road, Little Falls, NJ 07424-2139, telephone 1-800-843-2763, http://
www.asme.org.
(1) 2015 ASME Boiler and Pressure Vessel Code (ASME Code), 2015
Edition, July 1, 2015 (as follows), into Sec. Sec. 172.102; 173.3;
173.5b; 173.24b; 173.306; 173.315; 173.318; 173.420; 178.255-1; 178.255-
2; 178.255-14; 178.255-15; 178.273; 178.274; 178.276; 178.277; 178.320;
178.337-1; 178.337-2; 178.337-3; 178.337-4; 178.337-6; 178.337-16;
178.337-18; 178.338-1; 178.338-2; 178.338-3; 178.338-4; 178.338-5;
178.338-6; 178.338-13; 178.338-16; 178.338-18; 178.338-19; 178.345-1;
178.345-2; 178.345-3; 178.345-4; 178.345-7; 178.345-14; 178.345-15;
178.346-1; 178.347-1; 178.348-1; 179.400-3; 180.407:
(i) Section II--Materials--Part A--Ferrous Materials Specifications.
(ii) Section II--Materials--Part B--Nonferrous Material
Specifications.
(iii) Section V--Nondestructive Examination.
(iv) Section VIII--Rules for Construction of Pressure Vessels
Division 1.
[[Page 108]]
(v) Section IX--Welding, Brazing, and Fusing Qualifications.
(2) ASME B31.4-2012, Pipeline Transportation Systems for Liquids and
Slurries, November 12, 2012, into Sec. 173.5a.
(h) American Society for Testing and Materials, 100 Barr Harbor
Drive, West Conshohocken, PA 1942, telephone (610) 832-9585, http://
www.astm.org. Copies of historical standards or standards that ASTM does
not have may be purchased from: Engineering Societies Library, 354 East
47th Street, New York, NY 10017.
(1) ASTM A 20/A 20M-93a Standard Specification for General
Requirements for Steel Plates for Pressure Vessels, 1993, into
Sec. Sec. 178.337-2; 179.102-4; 179.102-1; 179.102-17.
(2) ASTM A 47-68 Malleable Iron Castings, 1968, into Sec. 179.200-
15.
(3) ASTM A 53/A 53M-06a (ASTM A 53) Standard Specification for Pipe,
Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless, 2006,
into Sec. 173.5b.
(4) ASTM A 106/A 106M-06a (ASTM A 106) Standard Specification for
Seamless Carbon Steel Pipe for High-Temperature Service, 2006, into
Sec. 173.5b.
(5) ASTM A 240/A 240M-99b Standard Specification for Heat-Resisting
Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for
Pressure Vessels, 1999, into Sec. Sec. 178.57; 178.358-5; 179.100-7;
179.100-10; 179.102-1; 179.102-4; 179.102-17; 179.200-7; 179.201-5;
179.220-7; 179.300-7; 179.400-5.
(6) ASTM A 242-81 Standard Specification for High-Strength Low-Alloy
Structural Steel, 1981, into Sec. 178.338-2.
(7) ASTM A 262-93a Standard Practices for Detecting Susceptibility
to Intergranular Attack in Austenitic Stainless Steels, 1993, into
179.100-7; 179.200-7; 179.201-4.
(8) ASTM A 285-78 Pressure Vessel Plates, Carbon Steel, Low- and
Intermediate-Tensile Strength, 1978, into Sec. 179.300-7.
(9) ASTM A 300-58 Steel Plates for Pressure Vessels for Service at
Low Temperatures, 1958, into Sec. 178.337-2.
(10) ASTM A 302/A 302M-93 Standard Specification for Pressure Vessel
Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum
Nickel, 1993, into Sec. 179.100-7; 179.200-7; 179.220-7.
(11) ASTM A 333-67 Seamless and Welded Steel Pipe for Low-
Temperature Service, 1967, into Sec. 178.45.
(12) ASTM A 370-94 Standard Test 179.102-1; 179.102-4; Methods and
Definitions for Mechanical Testing of Steel Products, 1994, into
Sec. Sec. 179.102-17; 179.102-1; 179.102-4.
(13) ASTM A 441-81 Standard Specification for High-Strength Low-
Alloy Structural Manganese Vanadium Steel, 1981, into Sec. 178.338-2.
(14) ASTM A 514-81 Standard Specification for High-Yield Strength
Quenched and Tempered Alloy Steel Plate, Suitable for Welding, 1981,
into Sec. 178.338-2.
(15) ASTM A 515/A 515M-03 Standard Specification for Pressure Vessel
Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service,
2003, into Sec. 179.300-7.
(16) ASTM A 516/A 516M-90 Standard Specification for Pressure Vessel
Plates, Carbon Steel, for Moderate and Lower-Temperature Service, 1990,
into Sec. 178.337-2; 179.100-7; 179.102-1; 179.102-2; 179.102-4;
179.102-17; 179.200-7; 179.220-7; 179.300-7.
(17) ASTM A 537/A 537M-91 Standard Specification for Pressure Vessel
Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, 1991, into Sec.
179.100-7; 179.102-4; 179.102-17.
(18) ASTM A 572-82 Standard Specification for High-Strength Low-
Alloy Columbian-Vanadium Steels of Structural Quality, 1982, into Sec.
178.338-2.
(19) ASTM A 588-81 Standard Specification for High-Strength Low-
Alloy Structural Steel with 50 Ksi Minimum Yield Point to 4 in. Thick,
1981, into Sec. 178.338-2.
(20) ASTM A 606-75 Standard Specification for Steel Sheet and Strip
Hot-Rolled and Cold-Rolled, High-Strength, Low-Alloy, with Improved
Atmospheric Corrosion Resistance, 1975 (Reapproved 1981), into Sec.
178.338-2.
(21) ASTM A 607-98 Standard Specification for Steel, Sheet and
Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-
Rolled and Cold-Rolled, 1998, into Sec. 178.338-2.
(22) ASTM A 612-72a High Strength Steel Plates for Pressure Vessels
for Moderate and Lower Temperature Service, 1972, into Sec. 178.337-2.
[[Page 109]]
(23) ASTM A 633-79a Standard Specification for Normalized High-
Strength Low-Alloy Structural Steel, 1979 Edition, into Sec. 178.338-2.
(24) ASTM A 715-81 Standard Specification for Steel Sheet and Strip,
Hot-Rolled, High-Strength, Low-Alloy with Improved Formability, 1981,
into Sec. 178.338-2.
(25) ASTM A 1008/A 1008M-03 Standard Specification for Steel, Sheet,
Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High
Strength Low-Alloy with Improved Formability, 2003, into Sec. 178.338-
2; 178.345-2.
(26) ASTM A 1011/A 1011M-03a Standard Specification for Steel, Sheet
and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low Alloy and
High Strength Low-Alloy with Improved Formability, 2003, into Sec.
178.338-2; 178.345-2.
(27) ASTM B 162-93a Standard Specification for Nickel Plate, Sheet,
and Strip, 1993, into Sec. 173.249; 179.200-7.
(28) ASTM B 209-93 Standard Specification for Aluminum and Aluminum-
Alloy Sheet and Plate, 1993, into Sec. 179.100-7; 179.200-7; 179.220-7.
(29) ASTM B 221-76 Aluminum Alloy Extruded Bars, Rods, Shapes, and
Tubes, 1976, into Sec. 178.46.
(30) ASTM B 557-84 Tension Testing Wrought and Cast Aluminum and
Magnesium-Alloy Products, 1984, into Sec. 178.46.
(31) ASTM B 580-79 Standard Specification for Anodic Oxide Coatings
on Aluminum, (Re-approved 2000), into Sec. 173.316; 173.318; 178.338-
17.
(32) ASTM D 56-05, Standard Test Method for Flash Point by Tag
Closed Cup Tester, approved May 1, 2005, into Sec. 173.120.
(33) ASTM D 86-07a, Standard Test Method for Distillation of
Petroleum Products at Atmospheric Pressure, approved April 1, 2007, into
Sec. 173.121.
(34) ASTM D 93-08, Standard Test Methods for Flash Point by Pensky-
Martens Closed Cup Tester, approved October 15, 2008, into Sec.
173.120.
(35) ASTM D 1078-05, Standard Test Method for Distillation Range of
Volatile Organic Liquids, approved May 15, 2005, into Sec. 173.121.
(36) ASTM D 1238-90b Standard Test Method for Flow Rates of
Thermoplastics for Extrusion Plastometer, 1990, into Sec. 173.225.
(37) ASTM D 1709-01 Standard Test Methods for Impact Resistance of
Plastic Film by the Free-Falling Dart Method, 2001, into Sec. 173.197.
(38) ASTM D 1835-97 Standard Specification for Liquefied Petroleum
(LP) Gases, 1997, into Sec. 180.209.
(39) ASTM D 1838-64 Copper Strip Corrosion by Liquefied Petroleum
(LP) Gases, 1964, into Sec. 173.315.
(40) ASTM D 1922-00a Standard Test Method for Propogation Tear
Resistance of Plastic Film and Thin Sheeting by Pendulum Method, 2000,
into Sec. 173.197.
(41) ASTM D 3278-96 (Reapproved 2004) E1, Standard Test Methods for
Flash Point of Liquids by Small Scale Closed-Cup Apparatus, approved
November 1, 2004, into Sec. 173.120.
(42) ASTM D 3828-07a, Standard Test Methods for Flash Point by Small
Scale Closed Cup Tester, approved July 15, 2007, Sec. 173.120.
(43) ASTM D 4206-96 Standard Test Method for Sustained Burning of
Liquid Mixtures Using the Small Scale Open-Cup Apparatus, 1996, into
Sec. 173.120.
(44) ASTM D 4359-90 Standard Test Method for Determining Whether a
Material is a Liquid or a Solid, 1990 into Sec. Sec. 130.5, 171.8.
(45) ASTM E 8-99 Standard Test Methods for Tension Testing of
Metallic Materials, 1999, into Sec. 178.36; 178.37; 178.38; 178.39;
178.44; 178.45; 178.50; 178.51; 178.53; 178.55; 178.56; 178.57; 178.58;
178.59; 178.60; 178.61; 178.68.
(46) ASTM E 23-98 Standard Test Methods for Notched Bar Impact
Testing of Metallic Materials, 1998, into Sec. 178.57.
(47) ASTM E 112-88 Standard Test Methods for Determining Average
Grain Size, 1988, into Sec. 178.44.
(48) ASTM E 112-96 Standard Test Methods for Determining Average
Grain Size, 1996 Edition, into Sec. 178.274; part 178, appendix A.
(49) ASTM E 114-95 Standard Practice for Ultrasonic Pulse-Echo
Straight-Beam Examination by the Contact Method, 1995, into Sec.
178.45.
(50) ASTM E 213-98 Standard Practice for Ultrasonic Examination of
Metal Pipe and Tubing, into Sec. 178.45.
[[Page 110]]
(51) ASTM E 290-97a Standard Test Methods for Bend Testing of
Material for Ductility, published February 1998, into Sec. 178.37.
(i) [Reserved]
(j) American Welding Society, 550 NW. Le Jeune Road, Miami, Florida
33126.
(1) AWS Code B 3.0; Standard Qualification Procedure; 1972 (FRB 3.0-
41, rev. May 1973), into Sec. Sec. 178.356-2, 178.358-2.
(2) AWS Code D 1.0; Code for Welding in Building Construction (FR D
1.0-66, 1966), into Sec. Sec. 178.356-2; 178.358-2.
(k) Association of American Railroads, American Railroads Building,
50 F Street NW., Washington, DC 20001; telephone (877) 999-8824, http://
www.aar.org/publications.com.
(1) AAR Manual of Standards and Recommended Practices, Section C--
Part III, Specifications for Tank Cars, Specification M-1002, (AAR
Specifications for Tank Cars), December 2000, Sec. Sec. 173.31; 179.6;
179.7; 179.15; 179.16; 179.20; 179.22; 179.24; 179.100-9; 179.100-10;
179.100-12; 179.100-13; 179.100-14; 179.100-18; 179.101-1; 179.102-1;
179.102-4; 179.102-17; 179.103-5; 179.200-7; 179.200-9; 179.200-10;
179.200-11; 179.200-13; 179.200-17; 179.200-22; 179.201-6; 179.220-6;
179.220-7; 179.220-10; 179.220-11; 179.220-14; 179.220-18; 179.220-26;
179.300-9; 179.300-10; 179.300-15; 179.300-17; 179.400-5; 179.400-6;
179.400-8; 179.400-11; 179.400-12; 179.400-15; 179.400-18; 179.400-20;
179.400-25; 180.503; 180.509; 180.513; 180.515; 180.517.
(2) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Appendix E, Design Details, implemented
April 2010; into Sec. Sec. 179.202-9, and 179.202-12(f).
(3) AAR Manual of Standards and Recommended Practices, Section I,
Specially Equipped Freight Car and Intermodal Equipment, 1988, into
Sec. 174.55; 174.63.
(4) AAR Specifications for Design, Fabrication and Construction of
Freight Cars, Volume 1, 1988, into Sec. 179.16.
(5) AAR Standard 286; AAR Manual of Standards and Recommended
Practices, Section C, Car Construction Fundamentals and Details,
Standard S-286, Free/Unrestricted Interchange for 286,000 lb Gross Rail
Load Cars (Adopted 2002; Revised: 2003, 2005, 2006), into 179.13.
(l) Chlorine Institute, Inc., 1300 Wilson Boulevard, Arlington, VA
22209.
(1) Chlorine Institute Emergency Kit ``A'' for 100-lb. & 150 lb.
Chlorine Cylinders (with the exception of repair method using Device 8
for side leaks), Edition 10, June 2003, into 173.3.
(2) Chlorine Institute Emergency Kit ``B'' for Chlorine Ton
Containers (with the exception of repair method using Device 9 for side
leaks), Edition 9, June 2003, into 173.3.
(3) Type 1 JQ 225, Dwg., H51970, Revision F, November 1996, into
Sec. 173.315.
(4) Type 1 JQ 225, Dwg. H50155, Revision H, November 1996, into
Sec. 173.315.
(5) Section 3, Pamphlet 57, Emergency Shut-Off Systems for Bulk
Transfer of Chlorine, Edition 4, October 2003, into Sec. 177.840.
(6) Section 3, Pamphlet 166, Angle Valve Guidelines for Chlorine
Bulk Transportation, 1st Edition, October 2002, into Sec. 178.337-9.
(7) Standard Chlorine Angle Valve Assembly, Dwg. 104-8, July 1993,
into Sec. 178.337-9.
(8) Excess Flow Valve with Removable Seat, Dwg. 101-7, July 1993,
into Sec. 178.337-8.
(9) Excess Flow Valve with Removable Basket, Dwg. 106-6, July 1993,
into Sec. 178.337-8.
(10) Standards for Housing and Manway Covers for Steel Cargo Tanks,
Dwgs. 137-1 and 137-2, September 1, 1982, into Sec. 178.337-10.
(11) Typical Manway Arrangement Chlorine Cargo Tank, Dwg 137-5,
November 1996, into 178.337-10.
(m) Canadian General Standards Board, Place du Portage III, 6B1 11
Laurier Street, Gatineau, Quebec, Canada K1A 1G6.
(1) National Standard of Canada (CAN/CGSB 43.147--2005)
Construction, Modification, Qualification, Maintenance, and Selection
and Use of Means of Containment for the Handling, Offering for
Transport, or Transportation of Dangerous Goods by Rail, into Sec.
171.12.
(2) [Reserved]
(n) Compressed Gas Association (CGA), 1235 Jefferson Davis Highway,
Arlington, VA 22202.
[[Page 111]]
(1) CGA Pamphlet C-3, Standards for Welding on Thin-Walled Steel
Cylinders, 1994, into Sec. 178.47; 178.50; 178.51; 178.53; 178.55;
178.56; 178.57; 178.58; 178.59; 178.60; 178.61; 178.65; 178.68; 180.211.
(2) CGA C-5, Cylinder Service Life--Seamless Steel High Pressure
Cylinders, 1991 (reaffirmed 1995), into Sec. 173.302a.
(3) CGA Pamphlet C-6, Standards for Visual Inspection of Steel
Compressed Gas Cylinders, 1993, into Sec. 172.102, Sec. 173.3,
173.198, 180.205, 180.209, 180.211, 180.411, 180.519.
(4) CGA Pamphlet C-6.1, Standards for Visual Inspection of High
Pressure Aluminum Compressed Gas Cylinders, 2002, Fourth Edition, into
Sec. 180.205; 180.209.
(5) CGA Pamphlet C-6.2, Guidelines for Visual Inspection and
Requalification of Fiber Reinforced High Pressure Cylinders, 1996, Third
Edition, into Sec. 180.205.
(6) CGA Pamphlet C-6.3, Guidelines for Visual Inspection and
Requalification of Low Pressure Aluminum Compressed Gas Cylinders, 1991,
into Sec. 180.205; 180.209.
(7) CGA C-7, Guide to Preparation of Precautionary Labeling and
Marking of Compressed Gas Containers, Appendix A, issued 2004 (8th
Edition), into Sec. 172.400a.
(8) CGA Pamphlet C-8, Standard for Requalification of DOT-3HT
Cylinder Design, 1985, into Sec. 180.205; 180.209.
(9) CGA Pamphlet C-11, Recommended Practices for Inspection of
Compressed Gas Cylinders at Time of Manufacture, 2001, Third Edition,
into Sec. 178.35.
(10) CGA Pamphlet C-12, Qualification Procedure for Acetylene
Cylinder Design, 1994, into Sec. 173.301; 173.303; 178.59; 178.60.
(11) CGA Pamphlet C-13, Guidelines for Periodic Visual Inspection
and Requalification of Acetylene Cylinders, 2000, Fourth Edition, into
Sec. 173.303; 180.205; 180.209.
(12) CGA Pamphlet C-14, Procedures for Fire Testing of DOT Cylinder
Pressure Relief Device Systems, 1979, into Sec. 173.301; 173.323.
(13) CGA G-1.6-2011, Standard for Mobile Acetylene Trailer Systems,
Seventh Edition, copyright 2011, into Sec. 173.301.
(14) CGA Pamphlet G-2.2, Guideline Method for Determining Minimum of
0.2% Water in Anhydrous Ammonia, 1985, Second Edition, Reaffirmed 1997,
into Sec. 173.315.
(15) CGA Pamphlet G-4.1, Cleaning Equipment for Oxygen Service,
1985, into Sec. 178.338-15.
(16) CGA Pamphlet P-20, Standard for the Classification of Toxic Gas
Mixtures, 1995, into Sec. 173.115.
(17) CGA Pamphlet P-20, Standard for the Classification of Toxic Gas
Mixtures, 2003, Third Edition, into Sec. 173.115.
(18) CGA S-1.1, Pressure Relief Device Standards--Part 1--Cylinders
for Compressed Gases, (with the exception of paragraph 9.1.1.1), Twelfth
Edition, 2005, into Sec. 173.301, 173.304a 178.75.
(19) CGA Pamphlet S-1.2, Safety Relief Device Standards Part 2--
Cargo and Portable Tanks for Compressed Gases, 1980, into Sec. 173.315;
173.318; 178.276; 178.277.
(20) CGA S-7, Method for Selecting Pressure Relief Devices for
Compressed Gas Mixtures in Cylinders, 2005, into Sec. 173.301.
(21) CGA Technical Bulletin TB-2, Guidelines for Inspection and
Repair of MC-330 and MC-331 Cargo Tanks, 1980, into Sec. 180.407;
180.413.
(22) CGA Technical Bulletin TB-25, Design Considerations for Tube
Trailers, 2008 Edition, into Sec. 173.301.
(o) Department of Defense (DOD), 2461 Eisenhower Avenue, Alexandria,
VA 22331.
(1) DOD TB 700-2; NAVSEAINST 8020.8B; AFTO 11A-1-47; DLAR 8220.1:
Explosives Hazard Classification Procedures, January 1998, into Sec.
173.56.
(2) Packaging of Hazardous Material, DLAD 4145.41/AR 700-143/AFJI
24-210/NAVSUPINST 4030.55B/MCO 4030.40B, January 14, 2000, into Sec.
173.7.
(p) [Reserved]
(q) General Services Administration, Specification Office, Room
6662, 7th and D Street, S.W., Washington, DC 20407.
(1) Federal Specification RR-C-901D, Cylinders, Compressed Gas:
Seamless Shatterproof, High Pressure DOT 3AA Steel, and 3AL Aluminum,
February 21, 2003, into Sec. Sec. 173.302; 173.336; 173.337.
(2) [Reserved]
[[Page 112]]
(r) Institute of Makers of Explosives, 1120 19th Street NW., Suite
310, Washington, DC 20036-3605.
(1) IME Standard 22,IME Safety Library Publication No. 22,
Recommendations for the Safe Transportation of Detonators in a Vehicle
with Certain Other Explosive Materials, February 2007, into Sec. Sec.
173.63; 177.835.
(2) IME Standard 23, IME Safety Library Publication No. 23 (IME
Standard 23), Recommendations for the Transportation of Explosives,
Division 1.5, Ammonium Nitrate Emulsions, Division 5.1, Combustible
Liquids, Class 3, and Corrosives, Class 8 in Bulk Packaging, October
2011, into Sec. Sec. 173.66(intro); 177.835(d).
(s) International Atomic Energy Agency (IAEA), P.O. Box 100,
Wagramer Strasse 5, A-1400 Vienna, Austria. Also available from: Bernan
Associates, 4611-F Assembly Drive, Lanham, MD 20706-4391, USA; or Renouf
Publishing Company, Ltd., 812 Proctor Avenue, Ogdensburg, New York
13669, USA.
(1) IAEA Safety Standards for Protecting People and the Environment;
Regulations for the Safe Transport of Radioactive Material, No. SSR-6,
(IAEA Regulations), 2012 Edition, into Sec. Sec. 171.22; 171.23;
171.26; 173.415; 173.416; 173.417; 173.435; 173.473.
(2) [Reserved]
(t) International Civil Aviation Organization (``ICAO''), 999
Robert-Bourassa Boulevard, Montreal, Quebec H3C 5H7, Canada, 1-
514-954-8219, http://www.icao.int. ICAO Technical Instructions available
from: ICAO Document Sales Unit, [email protected].
(1) Technical Instructions for the Safe Transport of Dangerous Goods
by Air (ICAO Technical Instructions), 2017-2018 Edition, copyright 2016,
into Sec. Sec. 171.8; 171.22; 171.23; 171.24; 172.101; 172.202;
172.401; 172.512; 172.519; 172.602; 173.56; 173.320; 175.10, 175.33;
178.3.
(2) [Reserved]
(u) International Electrotechnical Commission (IEC), 3 rue de
Varembe, P.O. Box 131, CH--1211, GENEVA 20, Switzerland.
(1) IEC 62282-6-100:2010(E), Fuel cell technologies--Part 6-100:
Micro fuel cell power systems--Safety, Edition 1.0, March 2010, into
Sec. Sec. 173.230; 175.10.
(2) 62282-6-100 Amend. 1 IEC 2012(E), Amendment 1 to IEC 62282-6-
100: Fuel cell technologies--Part 6-100: Micro fuel cell power systems--
Safety, Edition 1.0, October 2012, into Sec. Sec. 173.230; 175.10
(v) International Maritime Organization (``IMO''), 4 Albert
Embankment, London, SE1 7SR, United Kingdom, + 44 (0) 20 7735 7611,
http://www.imo.org. IMDG Code available from: IMO Publishing,
[email protected].
(1) International Convention for the Safety of Life at Sea, 1974,
Consolidated Edition (SOLAS), Chapter II-2, Construction--Fire
protection, fire detection and fire extinction, Regulation 19, Carriage
of dangerous goods, Fifth Edition 2009, into Sec. Sec. 176.63, 176.84.
(2) International Maritime Dangerous Goods Code (IMDG Code),
Incorporating Amendment 38-16 (English Edition), 2016 Edition, into
Sec. Sec. 171.22; 171.23; 171.25; 172.101; 172.202; 172.203 172.401;
172.502; 172.519; 172.602; 173.21; 173.56; 176.2; 176.5; 176.11; 176.27;
176.30; 176.83; 176.84; 176.140; 176.720; 176.906; 178.3; 178.274.
(w) International Organization for Standardization, Case Postale 56,
CH-1211, Geneve 20, Switzerland, http://www.iso.org. Also available
from: ANSI 25, West 43rd Street, New York, NY 10036, 1-212-642-4900,
http://www.ansi.org.
(1) ISO 535-1991(E) Paper and board--Determination of water
absorptiveness--Cobb method, 1991, into Sec. Sec. 178.707; 178.708;
178.516.
(2) ISO 1496-1: 1990 (E)--Series 1 freight containers--Specification
and testing, Part 1: General cargo containers. Fifth Edition, (August
15, 1990), into Sec. 173.411.
(3) ISO 1496-3(E)--Series 1 freight containers--Specification and
testing--Part 3: Tank containers for liquids, gases and pressurized dry
bulk, Fourth edition, March 1995, into Sec. Sec. 178.74; 178.75;
178.274.
(4) ISO 1516:2002(E), Determination of flash/no flash--Closed cup
equilibrium method, Third Edition, 2002-03-01, into Sec. 173.120.
(5) ISO 1523:2002(E), Determination of flash point--Closed cup
equilibrium method, Third Edition, 2002-03-01, into Sec. 173.120.
(6) ISO 2431-1984(E) Standard Cup Method, 1984, into Sec. 173.121.
(7) ISO 2592:2000(E), Determination of flash and fire points--
Cleveland open
[[Page 113]]
cup method, Second Edition, 2000-09-15, into Sec. 173.120.
(8) ISO 2719:2002(E), Determination of flash point--Pensky-Martens
closed cup method, Third Edition, 2002-11-15, into Sec. 173.120.
(9) ISO 2919:1999(E), Radiation Protection--Sealed radioactive
sources--General requirements and classification, (ISO 2919), second
edition, February 15, 1999, into Sec. 173.469.
(10) ISO 3036-1975(E) Board--Determination of puncture resistance,
1975, into Sec. 178.708.
(11) ISO 3405:2000(E), Petroleum products--Determination of
distillation characteristics at atmospheric pressure, Third Edition,
2000-03-01, into Sec. 173.121.
(12) ISO 3574-1986(E) Cold-reduced carbon steel sheet of commercial
and drawing qualities, into Sec. 178.503; part 178, appendix C.
(13) ISO 3679:2004(E), Determination of flash point--Rapid
equilibrium closed cup method, Third Edition, 2004-04-01, into Sec.
173.120.
(14) ISO 3680:2004(E), Determination of flash/no flash--Rapid
equilibrium closed cup method, Fourth Edition, 2004-04-01, into Sec.
173.120.
(15) ISO 3807-2(E), Cylinders for acetylene--Basic requirements--
Part 2: Cylinders with fusible plugs, First edition, March 2000, into
Sec. Sec. 173.303; 178.71.
(16) ISO 3807:2013(E), Gas cylinders--Acetylene cylinders--Basic
requirements and type testing, Second edition, 2013-09-01, into
Sec. Sec. 173.303; 178.71.
(17) ISO 3924:1999(E), Petroleum products--Determination of boiling
range distribution--Gas chromatography method, Second Edition, 1999-08-
01, into Sec. 173.121.
(18) ISO 4126-1:2004(E): Safety devices for protection against
excessive pressure--Part 1: Safety valves, Second edition 2004-02-15,
into Sec. 178.274.
(19) ISO 4126-7:2004(E): Safety devices for protection against
excessive pressure--Part 7: Common data, First Edition 2004-02-15 into
Sec. 178.274.
(20) ISO 4126-7:2004/Cor.1:2006(E): Safety devices for protection
against excessive pressure--Part 7: Common data, Technical Corrigendum
1, 2006-11-01, into Sec. 178.274.
(21) ISO 4626:1980(E), Volatile organic liquids--Determination of
boiling range of organic solvents used as raw materials, First Edition,
1980-03-01, into Sec. 173.121.
(22) ISO 4706:2008(E), Gas cylinders--Refillable welded steel
cylinders--Test pressure 60 bar and below, First Edition, 2008-07-014,
Corrected Version, 2008-07-01, into Sec. 178.71.
(23) ISO 6406(E), Gas cylinders--Seamless steel gas cylinders--
Periodic inspection and testing, Second edition, February 2005, into
Sec. 180.207.
(24) ISO 6892 Metallic materials--Tensile testing, July 15, 1984,
First Edition, into Sec. 178.274.
(25) ISO 7225(E), Gas cylinders--Precautionary labels, Second
Edition, July 2005, into Sec. 178.71.
(26) ISO 7866(E), Gas cylinders--Refillable seamless aluminum alloy
gas cylinders--Design, construction and testing, First edition, June
1999, into Sec. 178.71.
(27) ISO 7866:2012(E), Gas cylinders--Refillable seamless aluminium
alloy gas cylinders--Design, construction and testing, Second edition,
2012-09-01, into Sec. 178.71.
(28) ISO 7866:2012/Cor.1:2014(E), Gas cylinders -- Refillable
seamless aluminium alloy gas cylinders -- Design, construction and
testing, Technical Corrigendum 1, 2014-04-15, into Sec. 178.71.
(29) ISO 8115 Cotton bales--Dimensions and density, 1986 Edition,
into Sec. 172.102.
(30) ISO 9809-1:1999(E): Gas cylinders--Refillable seamless steel
gas cylinders--Design, construction and testing--Part 1: Quenched and
tempered steel cylinders with tensile strength less than 1100 MPa.,
First edition, June 1999, into Sec. Sec. 178.37; 178.71; 178.75.
(31) ISO 9809-1:2010(E): Gas cylinders--Refillable seamless steel
gas cylinders--Design, construction and testing--Part 1: Quenched and
tempered steel cylinders with tensile strength less than 1 100 MPa.,
Second edition, 2010-04-15, into Sec. Sec. 178.37; 178.71; 178.75.
(32) ISO 9809-2:2000(E): Gas cylinders--Refillable seamless steel
gas cylinders--Design, construction and testing--Part 2: Quenched and
tempered steel cylinders with tensile strength greater than or equal to
1 100
[[Page 114]]
MPa., First edition, June 2000, into Sec. Sec. 178.71; 178.75.
(33) ISO 9809-2:2010(E): Gas cylinders--Refillable seamless steel
gas cylinders--Design, construction and testing--Part 2: Quenched and
tempered steel cylinders with tensile strength greater than or equal to
1100 MPa., Second edition, 2010-04-15, into Sec. Sec. 178.71; 178.75.
(34) ISO 9809-3:2000(E): Gas cylinders--Refillable seamless steel
gas cylinders--Design, construction and testing--Part 3: Normalized
steel cylinders, First edition, December 2000, into Sec. Sec. 178.71;
178.75.
(35) ISO 9809-3:2010(E): Gas cylinders--Refillable seamless steel
gas cylinders--Design, construction and testing--Part 3: Normalized
steel cylinders, Second edition, 2010-04-15, into Sec. Sec. 178.71;
178.75.
(36) ISO 9809-4:2014(E), Gas cylinders--Refillable seamless steel
gas cylinders--Design, construction and testing--Part 4: Stainless steel
cylinders with an Rm value of less than 1 100 MPa, First edition, 2014-
07-15, into Sec. Sec. 178.71; 178.75.
(37) ISO 9978:1992(E)--Radiation protection--Sealed radioactive
sources--Leakage test methods. First Edition, (February 15, 1992), into
Sec. 173.469.
(38) ISO 10156:2010(E): Gases and gas mixtures--Determination of
fire potential and oxidizing ability for the selection of cylinder valve
outlets, Third edition, 2010-04-01, into Sec. 173.115.
(39) ISO 10156:2010/Cor.1:2010(E): Gases and gas mixtures--
Determination of fire potential and oxidizing ability for the selection
of cylinder valve outlets, Technical Corrigendum 1, 2010-09-01, into
Sec. 173.115.
(40) ISO 10297:1999(E), Gas cylinders--Refillable gas cylinder
valves--Specification and type testing, First Edition, 1995-05-01, into
Sec. Sec. 173.301b; 178.71.
(41) ISO 10297:2006(E), Transportable gas cylinders--Cylinder
valves--Specification and type testing, Second Edition, 2006-01-15, into
Sec. Sec. 173.301b; 178.71.
(42) ISO 10297:2014(E), Gas cylinders--Cylinder valves--
Specification and type testing, Third Edition, 20014-07-15, into
Sec. Sec. 173.301b; 178.71.
(43) ISO 10461:2005(E), Gas cylinders--Seamless aluminum-alloy gas
cylinders--Periodic inspection and testing, Second Edition, 2005-02-15
and Amendment 1, 2006-07-15, into Sec. 180.207.
(44) ISO 10462 (E), Gas cylinders--Transportable cylinders for
dissolved acetylene--Periodic inspection and maintenance, Second
edition, February 2005, into Sec. 180.207.
(45) ISO 10462:2013(E), Gas cylinders--Acetylene cylinders--Periodic
inspection and maintenance, Third edition, 2013-12-15, into Sec.
180.207.
(46) ISO 10692-2:2001(E), Gas cylinders--Gas cylinder valve
connections for use in the micro-electronics industry--Part 2:
Specification and type testing for valve to cylinder connections, First
Edition, 2001-08-01, into Sec. Sec. 173.40; 173.302c.
(47) ISO 11114-1:2012(E), Gas cylinders--Compatibility of cylinder
and valve materials with gas contents--Part 1: Metallic materials,
Second edition, 2012-03-15, into Sec. Sec. 172.102; 173.301b; 178.71.
(48) ISO 11114-2:2013(E), Gas cylinders--Compatibility of cylinder
and valve materials with gas contents--Part 2: Non-metallic materials,
Second edition, 2013-04-01, into Sec. Sec. 173.301b; 178.71.
(49) ISO 11117:1998(E): Gas cylinders--Valve protection caps and
valve guards for industrial and medical gas cylinders.--Design,
construction and tests, First edition, 1998-08-01, into Sec. 173.301b.
(50) ISO 11117:2008(E): Gas cylinders--Valve protection caps and
valve guards--Design, construction and tests, Second edition, 2008-09-
01, into Sec. 173.301b.
(51) ISO 11117:2008/Cor.1:2009(E): Gas cylinders--Valve protection
caps and valve guards--Design, construction and tests, Technical
Corrigendum 1, 2009-05-01, into Sec. 173.301b.
(52) ISO 11118(E), Gas cylinders--Non-refillable metallic gas
cylinders--Specification and test methods, First edition, October 1999,
into Sec. 178.71.
(53) ISO 11119-1(E), Gas cylinders--Gas cylinders of composite
construction--Specification and test methods--Part 1: Hoop-wrapped
composite gas cylinders, First edition, May 2002, into Sec. 178.71.
(54) ISO 11119-1:2012(E), Gas cylinders--Refillable composite gas
cylinders and tubes--Design, construction
[[Page 115]]
and testing-- Part 1: Hoop wrapped fibre reinforced composite gas
cylinders and tubes up to 450 l, Second edition, 2012-08-01, into Sec.
178.71.
(55) ISO 11119-2(E), Gas cylinders--Gas cylinders of composite
construction--Specification and test methods--Part 2: Fully wrapped
fibre reinforced composite gas cylinders with load-sharing metal liners,
First edition, May 2002, into Sec. 178.71.
(56) ISO 11119-2:2012(E), Gas cylinders--Refillable composite gas
cylinders and tubes--Design, construction and testing--Part 2: Fully
wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
with load-sharing metal liners, Second edition, 2012-07-15, into Sec.
178.71.
(57) ISO 11119-2:2012/Amd.1:2014(E), Gas cylinders--Refillable
composite gas cylinders and tubes--Design, construction and testing--
Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes
up to 450 l with load-sharing metal liners, Amendment 1, 2014-08-15,
into Sec. 178.71.
(58) ISO 11119-3(E), Gas cylinders of composite construction--
Specification and test methods--Part 3: Fully wrapped fibre reinforced
composite gas cylinders with non-load-sharing metallic or non-metallic
liners, First edition, September 2002, into Sec. 178.71.
(59) ISO 11119-3:2013(E), Gas cylinders-- Refillable composite gas
cylinders and tubes--Design, construction and testing--Part 3: Fully
wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
with non-load-sharing metallic or non-metallic liners, Second edition,
2013-04-15, into Sec. 178.71.
(60) ISO 11120(E), Gas cylinders--Refillable seamless steel tubes of
water capacity between 150 L and 3000 L--Design, construction and
testing, First edition, March 1999, into Sec. Sec. 178.71; 178.75.
(61) ISO 11513:2011(E), Gas cylinders--Refillable welded steel
cylinders containing materials for sub-atmospheric gas packaging
(excluding acetylene)--Design, construction, testing, use and periodic
inspection, First edition, 2011-09-12, into Sec. Sec. 173.302c; 178.71;
180.207.
(62) ISO 11621(E), Gas cylinders--Procedures for change of gas
service, First edition, April 1997, into Sec. Sec. 173.302, 173.336,
173.337.
(63) ISO 11623(E), Transportable gas cylinders--Periodic inspection
and testing of composite gas cylinders, First edition, March 2002, into
Sec. 180.207.
(64) ISO 13340:2001(E) Transportable gas cylinders--Cylinder valves
for non-refillable cylinders--Specification and prototype testing, First
edition, 2004-04-01, into Sec. Sec. 173.301b; 178.71.
(65) ISO 13736:2008(E), Determination of flash point--Abel closed-
cup method, Second Edition, 2008-09-15, into Sec. 173.120.
(66) ISO 16111:2008(E), Transportable gas storage devices--Hydrogen
absorbed in reversible metal hydride, First Edition, 2008-11-15, into
Sec. Sec. 173.301b; 173.311; 178.71.
(67) ISO 18172-1:2007(E), Gas cylinders--Refillable welded stainless
steel cylinders--Part 1: Test pressure 6 MPa and below, First Edition,
2007-03-01, into Sec. 178.71.
(68) ISO 20703:2006(E), Gas cylinders--Refillable welded aluminum-
alloy cylinders--Design, construction and testing, First Edition, 2006-
05-01, into Sec. 178.71.
(x) National Board of Boiler and Pressure Vessel Inspectors, 1055
Crupper Avenue, Columbus, Ohio 43229.
(1) NB-23, National Board Inspection Code, A Manual for Boiler and
Pressure Vessel Inspectors, 1992 Edition, into Sec. 180.413.
(2) [Reserved]
(y) National Fire Protection Association, 1 Batterymarch Park,
Quincy, MA, 02169-7471 1-617-770-3000, http://www.nfpa.org.
(1) NFPA 58-Liquefied Petroleum Gas Code, 2001 Edition, into
Sec. Sec. 173.5, 173.315.
(2) NFPA 498-Standards for Safe Havens and Interchange Lots for
Vehicles Transporting Explosives, 2010 Edition, into Sec. 177.835.
(z) National Institute of Standards and Technology, Department of
Commerce, 5285 Port Royal Road, Springfield, VA 22151.
(1) USDC, NBS Handbook H-28 (1957), 1957 Handbook of Screw-Thread
Standards for Federal Services, December 1966 Edition, into Sec. Sec.
179.2; 178.45; 178.46.
(2) [Reserved]
(aa) Organization for Economic Cooperation and Development (OECD),
OECD Publications and Information
[[Page 116]]
Center, 2001 L Street, N.W., Suite 700, Washington, DC 20036.
(1) Test No. 404: Acute Dermal Irritation/Corrosion, OECD Guidelines
for the Testing of Chemicals, Section 4: Health Effects, adopted April
24, 2002, into Sec. 173.137.
(2) Test No. 430: In VitroSkin Corrosion: Transcutaneous Electrical
Resistance Test (TER), OECD Guidelines for the Testing of Chemicals,
Section 4: Health Effects, adopted April 13, 2004, into Sec. 173.137.
(3) OECD (2004), Test No. 431: In VitroSkin Corrosion: Human Skin
Model Test, OECD Guidelines for the Testing of Chemicals, Section 4:
Health Effects, OECD Publishing, adopted April 13, 2004, into Sec.
173.137.
(4) Test No. 435: In VitroMembrane Barrier Test Method for Skin
Corrosion, OECD Guidelines for the Testing of Chemicals, Section 4:
Health Effects, adopted July 19, 2006, into Sec. 173.137.
(bb) Transport Canada, Transport Dangerous Goods. Mailstop: ASD 330
Sparks Street, Ottawa, Ontario, Canada K1A 0N5, 416-973-1868, http://
www.tc.gc.ca.
(1) Transportation of Dangerous Goods Regulations (Transport Canada
TDG Regulations), into Sec. Sec. 107.801; 107.805; 171.12; 171.22;
171.23; 172.401; 172.502; 172.519; 172.602; 173.31; 173.32; 173.33;
173.301; 180.205; 180.211; 180.212; 180.413.
(i) SOR 2001-286, including Clear Language Amendments, August 2001.
(ii) SOR/2002-306 August 8, 2002.
(iii) SOR/2003-273 July 24, 2003
(iv) SOR/2003-400 December 3, 2003
(v) SOR/2005-216 July 13, 2005
(vi) SOR/2005-279 September 21, 2005
(vii) SOR/2008-34 February 7, 2008
(viii) SOR/2007-179 July 31, 2007
(ix) SOR/2011-239 November 9, 2011.
(x) SOR/2011-60 March 16, 2011.
(xi) SOR/2011-210 October 12, 2011.
(xii) SOR/2012-245 December 5, 2012.
(xiii) SOR/2014-152 July 2, 2014.
(xiv) SOR/2014-159 July 2, 2014.
(xv) SOR/2014-159 Erratum July 16, 2014.
(xvi) SOR/2014-152 Erratum August 27, 2014.
(xvii) SOR/2014-306 December 31, 2014.
(xviii) SOR/2014-306 Erratum January 28, 2015.
(xix) SOR/2015-100 May 20, 2015.
(2) [Reserved]
(cc) Truck Trailer Manufacturers Association, 1020 Princess Street,
Alexandria, Virginia 22314.
(1) TTMA RP No. 61-98, Performance of manhole and/or Fill Opening
Assemblies on MC 306, DOT 406, Non-ASME MC 312 and Non-ASME DOT 412
Cargo Tanks, June 1, 1998, into Sec. 180.405.
(2) TTMA RP No. 81-97, Performance of Spring Loaded Pressure Relief
Valves on MC 306, MC 307, MC 312, DOT 406, DOT 407, and DOT 412 Tanks,
July 1, 1997 Edition, into Sec. Sec. 178.345-10; 178.346-3.
(3) TTMA TB No. 107, Procedure for Testing In-Service Unmarked and/
or Uncertified MC 306 and Non-ASME MC 312 Type Cargo Tank Manhole
Covers, June 1, 1998 Edition, into Sec. 180.405.
(dd) United Nations, Bookshop, GA-1B-103, New York, NY 10017, 1-212-
963-7680, https://shop.un.org or [email protected].
(1) UN Recommendations on the Transport of Dangerous Goods, Model
Regulations (UN Recommendations), 19th revised edition, Volumes I and II
(2015), into Sec. Sec. 171.8; 171.12; 172.202; 172.401; 172.407;
172.502; 173.22; 173.24; 173.24b; 173.40; 173.56; 173.192; 173.302b;
173.304b; 178.75; 178.274.
(2) UN Recommendations on the Transport of Dangerous Goods, Manual
of Tests and Criteria, (Manual of Tests and Criteria), Sixth revised
edition (2015), into Sec. Sec. 171.24, 172.102; 173.21; 173.56; 173.57;
173.58; 173.60; 173.115; 173.124; 173.125; 173.127; 173.128; 173.137;
173.185; 173.220; 173.221; 173.225, part 173, appendix H; 176.905;
178.274.
(3) UN Recommendations on the Transport of Dangerous Goods, Globally
Harmonized System of Classification and Labelling of Chemicals (GHS),
Sixth revised edition (2015), into Sec. 172.401.
Table 1 to 49 CFR 171.7--Materials Not Incorporated by Reference
------------------------------------------------------------------------
Source and name of material 49 CFR reference
------------------------------------------------------------------------
American Biological Safety Association 1202
Allanson Road, Mundelein, IL 60060:
Risk Group Classification for 173.134.
Infectious Agents, 1998.
[[Page 117]]
American Institute of Chemical Engineers
(AIChE), 3 Park Avenue New York, NY 10016-
5991:
Process Safety Progress Journal, Vol. Note to Sec.
21, No. 2, Example of a Test Method 173.225(h)(3)(vi).
for Venting Sizing: OPPSD/SPI
Methodology.
American Society for Testing and Materials,
100 Barr Harbor Drive, West Conshohocken,
PA 19428 (Noncurrent ASTM Standards are
available from: Engineering Societies
Library, 354 East 47th Street, New York,
NY 10017):
ASTM E 380-89 Standards for Metric 171.10
Practice.
Association of American Railroads, American
Railroads Building, 50 F Street, NW.,
Washington, DC 20001:
AAR Catalog Nos. SE60CHT; SE60CC; 179.14
SE60CHTE; SE60CE; SE60DC; SE60DE.
AAR Catalog Nos. SE67CC; SE67CE; 179.14
SE67BHT; SE67BC; SE67BHTE; SE67BE.
AAR Catalog Nos. SE68BHT; SE68BC; 179.14
SE68BHTE; SE68BE.
AAR Catalog Nos. SE69AHTE; SE69AE...... 179.14
AAR Catalog Nos. SF70CHT; SF70CC; 179.14
SF70CHTE; SF70CE.
AAR Catalog Nos. SF73AC; SF73AE; 179.14
SF73AHT; SF73AHTE.
AAR Catalog Nos. SF79CHT; SF79CC; 179.14
SF79CHTE; SF79CE.
Bureau of Explosives, Hazardous Materials
Systems (BOE), Association of American
Railroads, American Railroads Building, 50
F Street NW., Washington, DC 20001:
Fetterley's Formula (The Determination 173.315
of the Relief Dimensions for Safety
Valves on Containers in which
Liquefied gas is charged and when the
exterior surface of the container is
exposed to a temperature of 1,200
[deg]F.).
Intermodal Loading Guide for Products 174.55; 174.101; 174.112;
in Closed Trailers and Containers, 174.115.
issued June 2001.
Pamphlet 6, Illustrating Methods for 174.55; 174.101; 174.112;
Loading and Bracing Carload and Less- 174.115; 174.290.
Than-Carload Shipments of Explosives
and Other Dangerous Articles, 1962.
Pamphlet 6A (includes appendix No. 1, 174.101; 174.290
October 1944 and appendix 2, December
1945), Illustrating Methods for
Loading and Bracing Carload and Less-
Than-Carload Shipments of Loaded
Projectiles, Loaded Bombs, etc., 1943.
Pamphlet 6C, Illustrating Methods for 174.55; 174.63; 174.101;
Loading and Bracing Trailers and Less- 174.112; 174.115
Than-Trailer Shipments of Explosives
and Other Dangerous Articles Via
Trailer-on-Flatcar (TOFC) or Container-
on-Flatcar (COFC), 1985.
Emergency Handling of Hazardous 171.7
Materials in Surface Transportation,
1989.
Centers for Disease Control and Prevention
1600 Clifton Road, Atlanta, GA 30333:
Biosafety in Microbiological and 173.134
Biomedical Laboratories, Fourth
Edition, April 1999.
National Institutes of Health Bethesda, MD
20892:
NIH Guidelines for Research Involving 173.134
Recombinant DNA Molecules (NIH
Guidelines), January 2001, Appendix B.
Pantone Incorporated 590 Commerce
Boulevard, Carlstadt, New Jersey 07072-
3098:
Pantone [supreg]Formula guide coated/ 172.407, 172.519
uncoated, Second Edition 2004.
Society of Plastics Industries, Inc.,
Organic Peroxide Producers Safety
Division, 1275 K Street NW., Suite 400,
Washington, DC 20005:
Self Accelerating Decomposition 173.21
Temperature Test, 1972.
The Sulphur Institute, 1020 19th St. NW.,
Suite 520, Washington, DC 20036.
Molten Sulphur Rail Tank Car Guidance 172.102
document, November 2010.
Truck Trailer Manufacturers Association,
1020 Princess Street, Alexandria, Virginia
22314, telephone (703) 549-3010, http://
www.ttmanet.org:
TTMA RP No. 96-01, TTMA RP No. 96-01, 178.345-3
Structural Integrity of DOT 406, DOT
407, and DOT 412 Cylindrical Cargo
Tanks, January 2001 Edition.
------------------------------------------------------------------------
[78 FR 1027, Jan. 7, 2013, as amended at 78 FR 15321, Mar. 11, 2013; 78
FR 65468, Oct. 31, 2013; 79 FR 15043, Mar. 18, 2014; 79 FR 40609, July
11, 2014; 80 FR 1114, Jan. 8, 2015; 80 FR 26746, May 8, 2015; 80 FR
79449, Dec. 21, 2015; 81 FR 25617, Apr. 29, 2016; 81 FR 35513, June 2,
2016; 82 FR 15833, Mar. 30, 2017]
Sec. 171.8 Definitions and abbreviations.
In this subchapter,
Administrator means the Administrator, Pipeline and Hazardous
Materials Safety Administration.
Adsorbed gas. See Sec. 173.115 of this subchapter.
Aerosol means an article consisting of any non-refillable receptacle
containing a gas compressed, liquefied or dissolved under pressure, the
sole purpose of which is to expel a nonpoisonous (other than a Division
6.1 Packing Group III material) liquid, paste, or powder and fitted with
a self-closing release device allowing the contents to be ejected by the
gas.
Agricultural product means a hazardous material, other than a
hazardous waste, whose end use directly supports the production of an
agricultural commodity including, but not
[[Page 118]]
limited to a fertilizer, pesticide, soil amendment or fuel. An
agricultural product is limited to a material in Class 3, 8 or 9,
Division 2.1, 2.2, 5.1, or 6.1, or an ORM-D material.
Aircraft battery means a battery designed in accordance with a
recognized aircraft battery design standard (e.g. FAA technical standard
order) that is capable of meeting all aircraft airworthiness
requirements and operating regulations.
Approval means a written authorization, including a competent
authority approval, issued by the Associate Administrator, the Associate
Administrator's designee, or as otherwise prescribed in the HMR, to
perform a function for which prior authorization by the Associate
Administrator is required under subchapter C of this chapter (49 CFR
parts 171 through 180).
Approved means approval issued or recognized by the Department
unless otherwise specifically indicated in this subchapter.
Asphyxiant gas means a gas which dilutes or replaces oxygen normally
in the atmosphere.
Associate Administrator means the Associate Administrator for
Hazardous Materials Safety, Pipeline and Hazardous Materials Safety
Administration.
Atmospheric gases means air, nitrogen, oxygen, argon, krypton, neon
and xenon.
Authorized Inspection Agency means: (1) A jurisdiction which has
adopted and administers one or more sections of the ASME Boiler and
Pressure Vessel Code as a legal requirement and has a representative
serving as a member of the ASME Conference Committee; or (2) an
insurance company which has been licensed or registered by the
appropriate authority of a State of the United States or a Province of
Canada to underwrite boiler and pressure vessel insurance in such State
or Province.
Authorized Inspector means an Inspector who is currently
commissioned by the National Board of Boiler and Pressure Vessel
Inspectors and employed as an Inspector by an Authorized Inspection
Agency.
Bag means a flexible packaging made of paper, plastic film,
textiles, woven material or other similar materials.
Bar means 1 BAR = 100 kPa (14.5 psi).
Barge means a non-selfpropelled vessel.
Biological product. See Sec. 173.134 of this subchapter.
Biological substances, Category B. See Sec. 173.134 of this
subchapter.
Bottle means an inner packaging having a neck of relatively smaller
cross section than the body and an opening capable of holding a closure
for retention of the contents.
Bottom shell means that portion of a tank car tank surface,
excluding the head ends of the tank car tank, that lies within two feet,
measured circumferentially, of the bottom longitudinal center line of
the tank car tank.
Box means a packaging with complete rectangular or polygonal faces,
made of metal, wood, plywood, reconstituted wood, fiberboard, plastic,
or other suitable material. Holes appropriate to the size and use of the
packaging, for purposes such as ease of handling or opening, or to meet
classification requirements, are permitted as long as they do not
compromise the integrity of the packaging during transportation, and are
not otherwise prohibited in this subchapter.
Break-bulk means packages of hazardous materials that are handled
individually, palletized, or unitized for purposes of transportation as
opposed to bulk and containerized freight.
Btu means British thermal unit.
Bulk packaging means a packaging, other than a vessel or a barge,
including a transport vehicle or freight container, in which hazardous
materials are loaded with no intermediate form of containment. A Large
Packaging in which hazardous materials are loaded with an intermediate
form of containment, such as one or more articles or inner packagings,
is also a bulk packaging. Additionally, a bulk packaging has:
(1) A maximum capacity greater than 450 L (119 gallons) as a
receptacle for a liquid;
(2) A maximum net mass greater than 400 kg (882 pounds) and a
maximum capacity greater than 450 L (119 gallons) as a receptacle for a
solid; or
[[Page 119]]
(3) A water capacity greater than 454 kg (1000 pounds) as a
receptacle for a gas as defined in Sec. 173.115 of this subchapter.
Bundle of cylinders means assemblies of UN cylinders fastened
together and interconnected by a manifold and transported as a unit. The
total water capacity for the bundle may not exceed 3,000 L, except that
a bundle intended for the transport of gases in Division 2.3 is limited
to a water capacity of 1,000 L. Not permitted for air transport.
Bureau of Explosives means the Bureau of Explosives (B of E) of the
Association of American Railroads.
C means Celsius or Centigrade.
Captain of the Port (COTP) means the officer of the Coast Guard,
under the command of a District Commander, so designated by the
Commandant for the purpose of giving immediate direction to Coast Guard
law enforcement activities within an assigned area. As used in this
subchapter, the term Captain of the Port includes an authorized
representative of the Captain of the Port.
Carfloat means a vessel that operates on a short run on an irregular
basis and serves one or more points in a port area as an extension of a
rail line or highway over water, and does not operate in ocean,
coastwise, or ferry service.
Cargo aircraft only means an aircraft that is used to transport
cargo and is not engaged in carrying passengers. For purposes of this
subchapter, the terms cargo aircraft only, cargo-only aircraft and cargo
aircraft have the same meaning.
Cargo tank means a bulk packaging that:
(1) Is a tank intended primarily for the carriage of liquids or
gases and includes appurtenances, reinforcements, fittings, and closures
(for the definition of a tank, see 49 CFR 178.320, 178.337-1, or
178.338-1, as applicable);
(2) Is permanently attached to or forms a part of a motor vehicle,
or is not permanently attached to a motor vehicle but which, by reason
of its size, construction or attachment to a motor vehicle is loaded or
unloaded without being removed from the motor vehicle; and
(3) Is not fabricated under a specification for cylinders,
intermediate bulk containers, multi-unit tank car tanks, portable tanks,
or tank cars.
Cargo tank motor vehicle means a motor vehicle with one or more
cargo tanks permanently attached to or forming an integral part of the
motor vehicle.
Cargo vessel means: (1) Any vessel other than a passenger vessel;
and
(2) Any ferry being operated under authority of a change of
character certificate issued by a Coast Guard Officer-in-Charge, Marine
Inspection.
Carrier means a person who transports passengers or property in
commerce by rail car, aircraft, motor vehicle, or vessel.
CC means closed-cup.
Character of vessel means the type of service in which the vessel is
engaged at the time of carriage of a hazardous material.
Class means hazard class. See hazard class.
Class 1. See Sec. 173.50 of this subchapter.
Class 2. See Sec. 173.115 of this subchapter.
Class 3. See Sec. 173.120 of this subchapter.
Class 4. See Sec. 173.124 of this subchapter.
Class 5. See Sec. 173.128 of this subchapter.
Class 6. See Sec. 173.132 of this subchapter.
Class 7. See Sec. 173.403 of this subchapter.
Class 8. See Sec. 173.136 of this subchapter.
Class 9. See Sec. 173.140 of this subchapter.
Closure means a device which closes an opening in a receptacle.
COFC means container-on-flat-car.
Combination packaging means a combination of packaging, for
transport purposes, consisting of one or more inner packagings secured
in a non-bulk outer packaging. It does not include a composite
packaging.
Combustible liquid. See Sec. 173.120 of this subchapter.
Commerce means trade or transportation in the jurisdiction of the
United States within a single state; between a place in a state and a
place outside of the state; that affects trade or transportation between
a place in a state
[[Page 120]]
and place outside of the state; or on a United States-registered
aircraft.
Compatibility group letter means a designated alphabetical letter
used to categorize different types of explosive substances and articles
for purposes of stowage and segregation. See Sec. 173.52 of this
subchapter.
Competent Authority means a national agency responsible under its
national law for the control or regulation of a particular aspect of the
transportation of hazardous materials (dangerous goods). The term
Appropriate Authority, as used in the ICAO Technical Instructions (IBR,
see Sec. 171.7), has the same meaning as Competent Authority. For
purposes of this subchapter, the Associate Administrator is the
Competent Authority for the United States.
Composite packaging means a packaging consisting of an outer
packaging and an inner receptacle, so constructed that the inner
receptacle and the outer packaging form an integral packaging. Once
assembled it remains thereafter an integrated single unit; it is filled,
stored, shipped and emptied as such.
Compressed gas. See Sec. 173.115 of this subchapter.
Consignee means the person or place shown on a shipping document,
package marking, or other media as the location to which a carrier is
directed to transport a hazardous material.
Consumer commodity means a material that is packaged and distributed
in a form intended or suitable for sale through retail sales agencies or
instrumentalities for consumption by individuals for purposes of
personal care or household use. This term also includes drugs and
medicines.
Container ship means a cargo vessel designed and constructed to
transport, within specifically designed cells, portable tanks and
freight containers which are lifted on and off with their contents
intact.
Corrosive material. See Sec. 173.136 of this subchapter.
Crate means an outer packaging with incomplete surfaces.
Crewmember means a person assigned to perform duty in an aircraft
during flight time.
Cryogenic liquid. See Sec. 173.115(g) of this subchapter.
Cultures and stocks. See Sec. 173.134 of this subchapter.
Cylinder means a pressure vessel designed for pressures higher than
40 psia and having a circular cross section. It does not include a
portable tank, multi-unit tank car tank, cargo tank, or tank car.
Dangerous when wet material. See Sec. 173.124 of this subchapter.
Design Certifying Engineer means a person registered with the
Department in accordance with subpart F of part 107 of this chapter who
has the knowledge and ability to perform stress analysis of pressure
vessels and otherwise determine whether a cargo tank design and
construction meets the applicable DOT specification. A Design Certifying
Engineer meets the knowledge and ability requirements of this section by
meeting any one of the following requirements:
(1) Has an engineering degree and one year of work experience in
cargo tank structural or mechanical design;
(2) Is currently registered as a professional engineer by
appropriate authority of a state of the United States or a province of
Canada; or
(3) Has at least three years' experience in performing the duties of
a Design Certifying Engineer prior to September 1, 1991.
Design life, for composite cylinders and tubes, means the maximum
life (in number of years) to which the cylinder or tube is designed and
approved in accordance with the applicable standard.
Designated facility means a hazardous waste treatment, storage, or
disposal facility that has been designated on the manifest by the
generator.
Display pack means a package intended to be placed at retail
locations which provide direct customer access to consumer commodities
contained within the package when all or part of the outer fiberboard
packaging is removed.
District Commander means the District Commander of the Coast Guard,
or his authorized representative, who has jurisdiction in the particular
geographical area.
Division means a subdivision of a hazard class.
DOD means the U.S. Department of Defense.
[[Page 121]]
Domestic transportation means transportation between places within
the United States other than through a foreign country.
DOT or Department means U.S. Department of Transportation.
Drum means a flat-ended or convex-ended cylindrical packaging made
of metal, fiberboard, plastic, plywood, or other suitable materials.
This definition also includes packagings of other shapes made of metal
or plastic (e.g., round taper-necked packagings or pail-shaped
packagings) but does not include cylinders, jerricans, wooden barrels or
bulk packagings.
Electronic data interchange (EDI) means the computer-to-computer
exchange of business data in standard formats. In EDI, information is
organized according to a specific format (electronic transmission
protocol) agreed upon by the sender and receiver of this information,
and transmitted through a computer transaction that requires no human
intervention or retyping at either end of the transmission.
Elevated temperature material means a material which, when offered
for transportation or transported in a bulk packaging:
(1) Is in a liquid phase and at a temperature at or above 100 [deg]C
(212 [deg]F);
(2) Is in a liquid phase with a flash point at or above 38 [deg]C
(100 [deg]F) that is intentionally heated and offered for transportation
or transported at or above its flash point; or
(3) Is in a solid phase and at a temperature at or above 240 [deg]C
(464 [deg]F).
Engine means a locomotive propelled by any form of energy and used
by a railroad.
EPA means U.S. Environmental Protection Agency.
Etiologic agent. See Sec. 173.134 of this subchapter.
EX number means a number preceded by the prefix ``EX'', assigned by
the Associate Administrator, to an item that has been evaluated under
the provisions of Sec. 173.56 of this subchapter.
Explosive. See Sec. 173.50 of this subchapter.
F means degree Fahrenheit.
Farmer means a person engaged in the production or raising of crops,
poultry, or livestock.
FC number means a number preceded by the prefix ``FC'', assigned by
a Fireworks Certification Agency to a Division 1.4G Consumer firework
device that has been certified under the provisions of Sec. 173.65 of
this subchapter.
Federal hazardous material transportation law means 49 U.S.C. 5101
et seq.
Ferry vessel means a vessel which is limited in its use to the
carriage of deck passengers or vehicles or both, operates on a short run
on a frequent schedule between two points over the most direct water
route, other than in ocean or coastwise service, and is offered as a
public service of a type normally attributed to a bridge or tunnel.
Filling density has the following meanings:
(1) For compressed gases in cylinders, see Sec. 173.304a(a)(2)
table note 1.
(2) For compressed gases in tank cars, see Sec. 173.314(c) table
note 1.
(3) For compressed gases in cargo tanks and portable tanks, see
Sec. 173.315(a) table note 1.
(4) For cryogenic liquids in cylinders, except hydrogen, see Sec.
173.316(c)(1).
(5) For hydrogen, cryogenic liquid in cylinders, see Sec.
173.316(c)(3) table note 1.
(6) For cryogenic liquids in cargo tanks, see Sec. 173.318(f)(1).
(7) For cryogenic liquids in tank cars, see Sec. 173.319(d)(1).
Flammable gas. See Sec. 173.115 of this subchapter.
Flammable liquid. See Sec. 173.120 of this subchapter.
Flammable solid. See Sec. 173.124 of this subchapter.
Flexible bulk container means a flexible container with a capacity
not exceeding 15 cubic meters and includes liners and attached handling
devices and service equipment.
Flash point. See Sec. 173.120 of this subchapter.
Freight container means a reusable container having a volume of 64
cubic feet or more, designed and constructed to permit being lifted with
its contents intact and intended primarily for containment of packages
(in unit form) during transportation.
Fuel cell means an electrochemical device that converts the energy
of the chemical reaction between a fuel, such
[[Page 122]]
as hydrogen or hydrogen rich gases, alcohols, or hydrocarbons, and an
oxidant, such as air or oxygen, to direct current (d.c.) power, heat,
and other reaction products.
Fuel cell cartridge or fuel cartridge means an article that stores
fuel for discharge into the fuel cell through a valve(s) that controls
the discharge of fuel into the fuel cell.
Fuel cell system means a fuel cell with an installed fuel cell
cartridge together with wiring, valves, and other attachments that
connect the fuel cell or cartridge to the device it powers. The fuel
cell or cartridge may be so constructed that it forms an integral part
of the device or may be removed and connected manually to the device.
Fuel tank means a tank other than a cargo tank, used to transport
flammable or combustible liquid, or compressed gas for the purpose of
supplying fuel for propulsion of the transport vehicle to which it is
attached, or for the operation of other equipment on the transport
vehicle.
Fumigated lading. See Sec. Sec. 172.302(g) and 173.9.
Gas means a material which has a vapor pressure greater than 300 kPa
(43.5 psia) at 50 [deg]C (122 [deg]F) or is completely gaseous at 20
[deg]C (68 [deg]F) at a standard pressure of 101.3 kPa (14.7 psia).
Gross weight or Gross mass means the weight of a packaging plus the
weight of its contents.
Hazard class means the category of hazard assigned to a hazardous
material under the definitional criteria of part 173 of this subchapter
and the provisions of the Sec. 172.101 table. A material may meet the
defining criteria for more than one hazard class but is assigned to only
one hazard class.
Hazard zone means one of four levels of hazard (Hazard Zones A
through D) assigned to gases, as specified in Sec. 173.116(a) of this
subchapter, and one of two levels of hazards (Hazard Zones A and B)
assigned to liquids that are poisonous by inhalation, as specified in
Sec. 173.133(a) of this subchapter. A hazard zone is based on the LC50
value for acute inhalation toxicity of gases and vapors, as specified in
Sec. 173.133(a).
Hazardous material means a substance or material that the Secretary
of Transportation has determined is capable of posing an unreasonable
risk to health, safety, and property when transported in commerce, and
has designated as hazardous under section 5103 of Federal hazardous
materials transportation law (49 U.S.C. 5103). The term includes
hazardous substances, hazardous wastes, marine pollutants, elevated
temperature materials, materials designated as hazardous in the
Hazardous Materials Table (see 49 CFR 172.101), and materials that meet
the defining criteria for hazard classes and divisions in part 173 of
this subchapter.
Hazardous substance for the purposes of this subchapter, means a
material, including its mixtures and solutions, that--
(1) Is listed in the appendix A to Sec. 172.101 of this subchapter;
(2) Is in a quantity, in one package, which equals or exceeds the
reportable quantity (RQ) listed in the appendix A to Sec. 172.101 of
this subchapter; and
(3) When in a mixture or solution--
(i) For radionuclides, conforms to paragraph 7 of the appendix A to
Sec. 172.101.
(ii) For other than radionuclides, is in a concentration by weight
which equals or exceeds the concentration corresponding to the RQ of the
material, as shown in the following table:
------------------------------------------------------------------------
Concentration by
weight
RQ pounds (kilograms) ---------------------
Percent PPM
------------------------------------------------------------------------
5000 (2270)....................................... 10 100,000
1000 (454)........................................ 2 20,000
100 (45.4)........................................ 0.2 2,000
10 (4.54)......................................... 0.02 200
1 (0.454)......................................... 0.002 20
------------------------------------------------------------------------
The term does not include petroleum, including crude oil or any
fraction thereof which is not otherwise specifically listed or
designated as a hazardous substance in appendix A to Sec. 172.101 of
this subchapter, and the term does not include natural gas, natural gas
liquids, liquefied natural gas, or synthetic gas usable for fuel (or
mixtures of natural gas and such synthetic gas).
Hazardous waste, for the purposes of this chapter, means any
material that is subject to the Hazardous Waste
[[Page 123]]
Manifest Requirements of the U.S. Environmental Protection Agency
specified in 40 CFR part 262.
Hazmat means a hazardous material.
Hazmat employee means: (1) A person who is:
(i) Employed on a full-time, part time, or temporary basis by a
hazmat employer and who in the course of such full time, part time or
temporary employment directly affects hazardous materials transportation
safety;
(ii) Self-employed (including an owner-operator of a motor vehicle,
vessel, or aircraft) transporting hazardous materials in commerce who in
the course of such self-employment directly affects hazardous materials
transportation safety;
(iii) A railroad signalman; or
(iv) A railroad maintenance-of-way employee.
(2) This term includes an individual, employed on a full time, part
time, or temporary basis by a hazmat employer, or who is self-employed,
who during the course of employment:
(i) Loads, unloads, or handles hazardous materials;
(ii) Designs, manufactures, fabricates, inspects, marks, maintains,
reconditions, repairs, or tests a package, container or packaging
component that is represented, marked, certified, or sold as qualified
for use in transporting hazardous material in commerce.
(iii) Prepares hazardous materials for transportation;
(iv) Is responsible for safety of transporting hazardous materials;
(v) Operates a vehicle used to transport hazardous materials.
Hazmat employer means:
(1) A person who employs or uses at least one hazmat employee on a
full-time, part time, or temporary basis; and who:
(i) Transports hazardous materials in commerce;
(ii) Causes hazardous materials to be transported in commerce; or
(iii) Designs, manufactures, fabricates, inspects, marks, maintains,
reconditions, repairs or tests a package, container, or packaging
component that is represented, marked, certified, or sold by that person
as qualified for use in transporting hazardous materials in commerce;
(2) A person who is self-employed (including an owner-operator of a
motor vehicle, vessel, or aircraft) transporting materials in commerce;
and who:
(i) Transports hazardous materials in commerce;
(ii) Causes hazardous materials to be transported in commerce; or
(iii) Designs, manufactures, fabricates, inspects, marks, maintains,
reconditions, repairs or tests a package, container, or packaging
component that is represented, marked, certified, or sold by that person
as qualified for use in transporting hazardous materials in commerce; or
(3) A department, agency, or instrumentality of the United States
Government, or an authority of a State, political subdivision of a
State, or an Indian tribe; and who:
(i) Transports hazardous materials in commerce;
(ii) Causes hazardous materials to be transported in commerce; or
(iii) Designs, manufactures, fabricates, inspects, marks, maintains,
reconditions, repairs or tests a package, container, or packaging
component that is represented, marked, certified, or sold by that person
as qualified for use in transporting hazardous materials in commerce.
Hermetically sealed means closed by fusion, gasketing, crimping, or
equivalent means so that no gas or vapor can enter or escape.
High-hazard flammable train (HHFT) means a single train transporting
20 or more loaded tank cars of a Class 3 flammable liquid in a
continuous block or a single train carrying 35 or more loaded tank cars
of a Class 3 flammable liquid throughout the train consist.
High-hazard flammable unit train (HHFUT) means a single train
transporting 70 or more loaded tank cars containing Class 3 flammable
liquid.
Household waste means any solid waste (including garbage, trash, and
sanitary waste from septic tanks) derived from households (including
single and multiple residences, hotels and motels, bunkhouses, ranger
stations, crew quarters, campgrounds, picnic grounds, and day-use
recreation areas).
[[Page 124]]
This term is not applicable to consolidated shipments of household
hazardous materials transported from collection centers. A collection
center is a central location where household waste is collected.
HMR means the Hazardous Materials Regulations, parts 171 through 180
of this chapter.
IAEA means International Atomic Energy Agency.
IATA means International Air Transport Association.
ICAO means International Civil Aviation Organization.
IMO means International Maritime Organization.
Incorporated by reference or IBR means a publication or a portion of
a publication that is made a part of the regulations of this subchapter.
See Sec. 171.7.
Infectious substance (etiologic agent). See Sec. 173.134 of this
subchapter.
Inner packaging means a packaging for which an outer packaging is
required for transport. It does not include the inner receptacle of a
composite packaging.
Inner receptacle means a receptacle which requires an outer
packaging in order to perform its containment function. The inner
receptacle may be an inner packaging of a combination packaging or the
inner receptacle of a composite packaging.
Intermediate bulk container or IBC means a rigid or flexible
portable packaging, other than a cylinder or portable tank, which is
designed for mechanical handling. Standards for IBCs manufactured in the
United States are set forth in subparts N and O of part 178 of this
subchapter.
Intermediate packaging means a packaging which encloses an inner
packaging or article and is itself enclosed in an outer packaging.
Intermodal container means a freight container designed and
constructed to permit it to be used interchangeably in two or more modes
of transport.
Intermodal portable tank or IM portable tank means a specific class
of portable tanks designed primarily for international intermodal use.
International transportation means transportation--
(1) Between any place in the United States and any place in a
foreign country;
(2) Between places in the United States through a foreign country;
or
(3) Between places in one or more foreign countries through the
United States.
Irritating material. See Sec. 173.132(a)(2) of this subchapter.
Jerrican means a metal or plastic packaging of rectangular or
polygonal cross-section.
Large packaging means a packaging that--
(1) Consists of an outer packaging that contains articles or inner
packagings;
(2) Is designated for mechanical handling;
(3) Exceeds 400 kg net mass or 450 liters (118.9 gallons) capacity;
(4) Has a volume of not more than 3 cubic meters (m\3\) (see Sec.
178.801(i) of this subchapter); and
(5) Conforms to the requirements for the construction, testing and
marking of Large Packagings as specified in subparts P and Q of part 178
of this subchapter.
Large salvage packaging means a special packaging into which
damaged, defective, leaking or non-conforming hazardous materials
packages, or hazardous materials that have spilled or leaked are placed
for the purpose of transport for recovery or disposal, that--
(1) Is designed for mechanical handling; and
(2) Has a net mass greater than 400 kg (882 pounds) or a capacity of
greater than 450 L (119 gallons), but has a volume of not more than 3
cubic meters (106 cubic feet).
Limited quantity, when specified as such in a section applicable to
a particular material, means the maximum amount of a hazardous material
for which there is a specific labeling or packaging exception.
Lighter means a mechanically operated flame-producing device
employing an ignition device and containing a Class 3 or a Division 2.1
material. For design, capacity, and filling density requirements for
lighters containing a Division 2.1 material, see Sec. 173.308.
[[Page 125]]
Lighter refill means a pressurized container that does not contain
an ignition device but does contain a release device and is intended for
use as a replacement cartridge in a lighter or to refill a lighter with
a Division 2.1 flammable gas fuel. For capacity limits, see Sec.
173.306(h) of this subchapter.
Liquid means a material, other than an elevated temperature
material, with a melting point or initial melting point of 20 [deg]C (68
[deg]F) or lower at a standard pressure of 101.3 kPa (14.7 psia). A
viscous material for which a specific melting point cannot be determined
must be subjected to the procedures specified in ASTM D 4359 ``Standard
Test Method for Determining Whether a Material is Liquid or Solid''
(IBR, see Sec. 171.7).
Liquid phase means a material that meets the definition of liquid
when evaluated at the higher of the temperature at which it is offered
for transportation or at which it is transported, not at the 38 [deg]C
(100 [deg]F) temperature specified in ASTM D 4359 (IBR, see Sec.
171.7).
Lithium ion cell or battery means a rechargeable electrochemical
cell or battery in which the positive and negative electrodes are both
lithium compounds constructed with no metallic lithium in either
electrode. A lithium ion polymer cell or battery that uses lithium ion
chemistries, as described herein, is regulated as a lithium ion cell or
battery.
Lithium metal cell or battery means an electrochemical cell or
battery utilizing lithium metal or lithium alloys as the anode. The
lithium content of a lithium metal or lithium alloy cell or battery is
measured when the cell or battery is in an undischarged state. The
lithium content of a lithium metal or lithium alloy battery is the sum
of the grams of lithium content contained in the component cells of the
battery.
Loading incidental to movement means loading by carrier personnel or
in the presence of carrier personnel of packaged or containerized
hazardous material onto a transport vehicle, aircraft, or vessel for the
purpose of transporting it, including the loading, blocking and bracing
a hazardous materials package in a freight container or transport
vehicle, and segregating a hazardous materials package in a freight
container or transport vehicle from incompatible cargo. For a bulk
packaging, loading incidental to movement means filling the packaging
with a hazardous material for the purpose of transporting it. Loading
incidental to movement includes transloading.
Magazine vessel means a vessel used for the receiving, storing, or
dispensing of explosives.
Magnetic material. See Sec. 173.21(d) of this subchapter.
Marine pollutant, means a material which is listed in appendix B to
Sec. 172.101 of this subchapter (also see Sec. 171.4) and, when in a
solution or mixture of one or more marine pollutants, is packaged in a
concentration which equals or exceeds:
(1) Ten percent by weight of the solution or mixture for materials
listed in the appendix; or
(2) One percent by weight of the solution or mixture for materials
that are identified as severe marine pollutants in the appendix.
Marking means a descriptive name, identification number,
instructions, cautions, weight, specification, or UN marks, or
combinations thereof, required by this subchapter on outer packagings of
hazardous materials.
Material of trade means a hazardous material, other than a hazardous
waste, that is carried on a motor vehicle--
(1) For the purpose of protecting the health and safety of the motor
vehicle operator or passengers;
(2) For the purpose of supporting the operation or maintenance of a
motor vehicle (including its auxiliary equipment); or
(3) By a private motor carrier (including vehicles operated by a
rail carrier) in direct support of a principal business that is other
than transportation by motor vehicle.
Material poisonous by inhalation or Material toxic by inhalation
means:
(1) A gas meeting the defining criteria in Sec. 173.115(c) of this
subchapter and assigned to Hazard Zone A, B, C, or D in accordance with
Sec. 173.116(a) of this subchapter;
(2) A liquid (other than as a mist) meeting the defining criteria in
Sec. 173.132(a)(1)(iii) of this subchapter and
[[Page 126]]
assigned to Hazard Zone A or B in accordance with Sec. 173.133(a) of
this subchapter; or
(3) Any material identified as an inhalation hazard by a special
provision in column 7 of the Sec. 172.101 table.
Maximum allowable working pressure or MAWP: For DOT specification
cargo tanks used to transport liquid hazardous materials, see Sec.
178.320(a) of this subchapter.
Maximum capacity means the maximum inner volume of receptacles or
packagings.
Maximum net mass means the allowable maximum net mass of contents in
a single packaging, or as used in subpart M of part 178 of this
subchapter, the maximum combined mass of inner packaging, and the
contents thereof.
Mechanical displacement meter prover means a mechanical device used
in the oilfield service industry consisting of a pipe assembly that is
used to calibrate the accuracy and performance of meters that measure
the quantities of a product being pumped or transferred at facilities
such as drilling locations, refineries, tank farms, and loading racks.
Metered delivery service means a cargo tank unloading operation
conducted at a metered flow rate of 378.5 L (100 gallons) per minute or
less through an attached delivery hose with a nominal inside diameter of
3.175 cm (1\1/4\ inches) or less.
Metal hydride storage system means a single complete hydrogen
storage system that includes a receptacle, metal hydride, pressure
relief device, shut-off valve, service equipment and internal components
used for the transportation of hydrogen only.
Miscellaneous hazardous material. See Sec. 173.140 of this
subchapter.
Mixture means a material composed of more than one chemical compound
or element.
Mode means any of the following transportation methods; rail,
highway, air, or water.
Motor vehicle includes a vehicle, machine, tractor, trailer, or
semitrailer, or any combination thereof, propelled or drawn by
mechanical power and used upon the highways in the transportation of
passengers or property. It does not include a vehicle, locomotive, or
car operated exclusively on a rail or rails, or a trolley bus operated
by electric power derived from a fixed overhead wire, furnishing local
passenger transportation similar to street-railway service.
Movement means the physical transfer of a hazardous material from
one geographic location to another by rail car, aircraft, motor vehicle,
or vessel.
Multiple-element gas container or MEGC means assemblies of UN
cylinders, tubes, or bundles of cylinders interconnected by a manifold
and assembled within a framework. The term includes all service
equipment and structural equipment necessary for the transport of gases.
Name of contents means the proper shipping name as specified in
Sec. 172.101 of this subchapter.
Navigable waters means, for the purposes of this subchapter, waters
of the United States, including the territorial seas.
Neutron Radiation Detector means a device that detects neutron
radiation. In such a device, a gas may be contained in a hermetically
sealed electron tube transducer that converts neutron radiation into a
measurable electric signal.
Non-bulk packaging means a packaging which has:
(1) A maximum capacity of 450 L (119 gallons) or less as a
receptacle for a liquid;
(2) A maximum net mass of 400 kg (882 pounds) or less and a maximum
capacity of 450 L (119 gallons) or less as a receptacle for a solid;
(3) A water capacity of 454 kg (1000 pounds) or less as a receptacle
for a gas as defined in Sec. 173.115 of this subchapter; or
(4) Regardless of the definition of bulk packaging, a maximum net
mass of 400 kg (882 pounds) or less for a bag or a box conforming to the
applicable requirements for specification packagings, including the
maximum net mass limitations, provided in subpart L of part 178 of this
subchapter.
Nonflammable gas. See Sec. 173.115 of this subchapter.
N.O.S. means not otherwise specified.
N.O.S. description means a shipping description from the Sec.
172.101 table which includes the abbreviation n.o.s.
[[Page 127]]
NPT means an American Standard taper pipe thread conforming to the
requirements of NBS Handbook H-28 (IBR, see Sec. 171.7).
NRC (non-reusable container) means a packaging (container) whose
reuse is restricted in accordance with the provisions of Sec. 173.28 of
this subchapter.
Occupied caboose means a rail car being used to transport non-
passenger personnel.
Officer in Charge, Marine Inspection means a person from the
civilian or military branch of the Coast Guard designated as such by the
Commandant and who under the supervision and direction of the Coast
Guard District Commander is in charge of a designated inspection zone
for the performance of duties with respect to the enforcement and
administration of title 52, Revised Statutes, acts amendatory thereof or
supplemental thereto, rules and regulations thereunder, and the
inspection required thereby.
Offshore supply vessel means a cargo vessel of less than 500 gross
tons that regularly transports goods, supplies or equipment in support
of exploration or production of offshore mineral or energy resources.
Open cryogenic receptacle means a transportable thermally insulated
receptacle for refrigerated liquefied gases maintained at atmospheric
pressure by continuous venting of the refrigerated gas.
Operator means a person who controls the use of an aircraft, vessel,
or vehicle.
Organic peroxide. See Sec. 173.128 of this subchapter.
ORM means other regulated material. See Sec. 173.144 of this
subchapter.
Outage or ullage means the amount by which a packaging falls short
of being liquid full, usually expressed in percent by volume.
Outer packaging means the outermost enclosure of a composite or
combination packaging together with any absorbent materials, cushioning
and any other components necessary to contain and protect inner
receptacles or inner packagings.
Overpack, except as provided in subpart K of part 178 of this
subchapter, means an enclosure that is used by a single consignor to
provide protection or convenience in handling of a package or to
consolidate two or more packages. Overpack does not include a transport
vehicle, freight container, or aircraft unit load device. Examples of
overpacks are one or more packages:
(1) Placed or stacked onto a load board such as a pallet and secured
by strapping, shrink wrapping, stretch wrapping, or other suitable
means; or
(2) Placed in a protective outer packaging such as a box or crate.
Oxidizer. See Sec. 173.127 of this subchapter.
Oxidizing gas means a gas which may, generally by providing oxygen,
cause or contribute to the combustion of other material more than air
does.
Oxidizing gas means a gas that may, generally by providing oxygen,
cause or contribute to the combustion of other material more than air
does. Specifically, this means a pure gas or gas mixture with an
oxidizing power greater than 23.5% as determined by a method specified
in ISO 10156: or 10156-2: (IBR, see Sec. 171.7 of this subchapter) (see
also Sec. 173.115(k)).
Oxygen generator (chemical) means a device containing chemicals that
upon activation release oxygen as a product of chemical reaction.
Package or Outside Package means a packaging plus its contents. For
radioactive materials, see Sec. 173.403 of this subchapter.
Packaging means a receptacle and any other components or materials
necessary for the receptacle to perform its containment function in
conformance with the minimum packing requirements of this subchapter.
For radioactive materials packaging, see Sec. 173.403 of this
subchapter.
Packing group means a grouping according to the degree of danger
presented by hazardous materials. Packing Group I indicates great
danger; Packing Group II, medium danger; Packing Group III, minor
danger. See Sec. 172.101(f) of this subchapter.
Passenger (With respect to vessels and for the purposes of part 176
only) means a person being carried on a vessel other than:
(1) The owner or his representative;
(2) The operator;
(3) A bona fide member of the crew engaged in the business of the
vessel
[[Page 128]]
who has contributed no consideration for his carriage and who is paid
for his services; or
(4) A guest who has not contributed any consideration directly or
indirectly for his carriage.
Passenger-carrying aircraft means an aircraft that carries any
person other than a crewmember, company employee, an authorized
representative of the United States, or a person accompanying the
shipment.
Passenger vessel means--
(1) A vessel subject to any of the requirements of the International
Convention for the Safety of Life at Sea, 1974, which carries more than
12 passengers;
(2) A cargo vessel documented under the laws of the United States
and not subject to that Convention, which carries more than 16
passengers;
(3) A cargo vessel of any foreign nation that extends reciprocal
privileges and is not subject to that Convention and which carries more
than 16 passengers; and
(4) A vessel engaged in a ferry operation and which carries
passengers.
Person means an individual, corporation, company, association, firm,
partnership, society, joint stock company; or a government, Indian
Tribe, or authority of a government or Tribe, that offers a hazardous
material for transportation in commerce, transports a hazardous material
to support a commercial enterprise, or designs, manufactures,
fabricates, inspects, marks, maintains, reconditions, repairs, or tests
a package, container, or packaging component that is represented,
marked, certified, or sold as qualified for use in transporting
hazardous material in commerce. This term does not include the United
States Postal Service or, for purposes of 49 U.S.C. 5123 and 5124, a
Department, agency, or instrumentality of the government.
Person who offers or offeror means:
(1) Any person who does either or both of the following:
(i) Performs, or is responsible for performing, any pre-
transportation function required under this subchapter for
transportation of the hazardous material in commerce.
(ii) Tenders or makes the hazardous material available to a carrier
for transportation in commerce.
(2) A carrier is not an offeror when it performs a function required
by this subchapter as a condition of acceptance of a hazardous material
for transportation in commerce (e.g., reviewing shipping papers,
examining packages to ensure that they are in conformance with this
subchapter, or preparing shipping documentation for its own use) or when
it transfers a hazardous material to another carrier for continued
transportation in commerce without performing a pre-transportation
function.
PHMSA means the Pipeline and Hazardous Materials Safety
Administration, U.S. Department of Transportation, Washington, DC 20590.
Placarded car means a rail car which is placarded in accordance with
the requirements of part 172 of this subchapter.
Poisonous gas. See Sec. 173.115 of this subchapter.
Poisonous materials. See Sec. 173.132 of this subchapter.
Portable tank means a bulk packaging (except a cylinder having a
water capacity of 1000 pounds or less) designed primarily to be loaded
onto, or on, or temporarily attached to a transport vehicle or ship and
equipped with skids, mountings, or accessories to facilitate handling of
the tank by mechanical means. It does not include a cargo tank, tank
car, multi-unit tank car tank, or trailer carrying 3AX, 3AAX, or 3T
cylinders.
Preferred route or Preferred highway is a highway for shipment of
highway route controlled quantities of radioactive materials so
designated by a State routing agency, and any Interstate System highway
for which an alternative highway has not been designated by such State
agency as provided by Sec. 397.103 of this title.
Pre-transportation function means a function specified in the HMR
that is required to assure the safe transportation of a hazardous
material in commerce, including--
(1) Determining the hazard class of a hazardous material.
(2) Selecting a hazardous materials packaging.
[[Page 129]]
(3) Filling a hazardous materials packaging, including a bulk
packaging.
(4) Securing a closure on a filled or partially filled hazardous
materials package or container or on a package or container containing a
residue of a hazardous material.
(5) Marking a package to indicate that it contains a hazardous
material.
(6) Labeling a package to indicate that it contains a hazardous
material.
(7) Preparing a shipping paper.
(8) Providing and maintaining emergency response information.
(9) Reviewing a shipping paper to verify compliance with the HMR or
international equivalents.
(10) For each person importing a hazardous material into the United
States, providing the shipper with timely and complete information as to
the HMR requirements that will apply to the transportation of the
material within the United States.
(11) Certifying that a hazardous material is in proper condition for
transportation in conformance with the requirements of the HMR.
(12) Loading, blocking, and bracing a hazardous materials package in
a freight container or transport vehicle.
(13) Segregating a hazardous materials package in a freight
container or transport vehicle from incompatible cargo.
(14) Selecting, providing, or affixing placards for a freight
container or transport vehicle to indicate that it contains a hazardous
material.
Primary hazard means the hazard class of a material as assigned in
the Sec. 172.101 table.
Private track or Private siding means: (i) Track located outside of
a carrier's right-of-way, yard, or terminals where the carrier does not
own the rails, ties, roadbed, or right-of-way, or
(ii) Track leased by a railroad to a lessee, where the lease
provides for, and actual practice entails, exclusive use of that
trackage by the lessee and/or a general system railroad for purpose of
moving only cars shipped to or by the lessee, and where the lessor
otherwise exercises no control over or responsibility for the trackage
or the cars on the trackage.
Proper shipping name means the name of the hazardous material shown
in Roman print (not italics) in Sec. 172.101 of this subchapter.
Psi means pounds per square inch.
Psia means pounds per square inch absolute.
Psig means pounds per square inch gauge.
Public vessel means a vessel owned by and being used in the public
service of the United States. It does not include a vessel owned by the
United States and engaged in a trade or commercial service or a vessel
under contract or charter to the United States.
Pyrophoric liquid. See Sec. 173.124(b) of this subchapter.
Radiation detection system means an apparatus that contains
radiation detectors as components.
Radioactive materials. See Sec. 173.403 of this subchapter for
definitions relating to radioactive materials.
Rail car means a car designed to carry freight or non-passenger
personnel by rail, and includes a box car, flat car, gondola car, hopper
car, tank car, and occupied caboose.
Railroad means a person engaged in transportation by rail.
Receptacle means a containment vessel for receiving and holding
materials, including any means of closing.
U.N. Recommendations means the U.N. Recommendations on the Transport
of Dangerous Goods, Model Regulations (IBR, see Sec. 171.7 of this
subchapter).
Reconditioned packaging. See Sec. 173.28 of this subchapter.
Registered Inspector means a person registered with the Department
in accordance with subpart F of part 107 of this chapter who has the
knowledge and ability to determine whether a cargo tank conforms to the
applicable DOT specification. A Registered Inspector meets the knowledge
and ability requirements of this section by meeting any one of the
following requirements:
(1) Has an engineering degree and one year of work experience
relating to the testing and inspection of cargo tanks;
(2) Has an associate degree in engineering and two years of work
experience relating to the testing and inspection of cargo tanks;
(3) Has a high school diploma (or General Equivalency Diploma) and
three years of work experience relating
[[Page 130]]
to the testing and inspection of cargo tanks; or
(4) Has at least three years' experience performing the duties of a
Registered Inspector prior to September 1, 1991.
Regulated medical waste. See Sec. 173.134 of this subchapter.
Remanufactured packagings. See Sec. 173.28 of this subchapter.
Reportable quantity (RQ) for the purposes of this subchapter means
the quantity specified in column 2 of the appendix to Sec. 172.101 for
any material identified in column 1 of the appendix.
Research means investigation or experimentation aimed at the
discovery of new theories or laws and the discovery and interpretation
of facts or revision of accepted theories or laws in the light of new
facts. Research does not include the application of existing technology
to industrial endeavors.
Residue means the hazardous material remaining in a packaging,
including a tank car, after its contents have been unloaded to the
maximum extent practicable and before the packaging is either refilled
or cleaned of hazardous material and purged to remove any hazardous
vapors.
Reused packaging. See Sec. 173.28 of this subchapter.
Reverse logistics means the process of offering for transport or
transporting by motor vehicle goods from a retail store for return to
its manufacturer, supplier, or distribution facility for the purpose of
capturing value (e.g., to receive manufacturer's credit), recall,
replacement, recycling, or similar reason. This definition does not
include materials that meet the definition of a hazardous waste as
defined in this section.
SADT means self-accelerated decomposition temperature. See Sec.
173.21(f) of this subchapter.
Salvage packaging means a special packaging conforming to Sec.
173.3 of this subchapter into which damaged, defective, leaking, or non-
conforming hazardous materials packages, or hazardous materials that
have spilled or leaked, are placed for purposes of transport for
recovery or disposal.
SAPT means self-accelerated polymerization temperature. See Sec.
173.21(f) of this subchapter. This definition will be effective until
January 2, 2019.
SCF (standard cubic foot) means one cubic foot of gas measured at 60
[deg]F. and 14.7 psia.
Secretary means the Secretary of Transportation.
Self-defense spray means an aerosol or non-pressurized device that:
(1) Is intended to have an irritating or incapacitating effect on a
person or animal; and
(2) Meets no hazard criteria other than for Class 9 (for example, a
pepper spray; see Sec. 173.140(a) of this subchapter) and, for an
aerosol, Division 2.1 or 2.2 (see Sec. 173.115 of this subchapter),
except that it may contain not more than two percent by mass of a tear
gas substance (e.g., chloroacetophenone (CN) or 0-
chlorobenzylmalonitrile (CS); see Sec. 173.132(a)(2) of this
subchapter.)
Service life, for composite cylinders and tubes, means the number of
years the cylinder or tube is permitted to be in service.
Settled pressure means the pressure exerted by the contents of a UN
pressure receptacle in thermal and diffusive equilibrium.
Sharps. See Sec. 173.134 of this subchapter.
Shipping paper means a shipping order, bill of lading, manifest or
other shipping document serving a similar purpose and prepared in
accordance with subpart C of part 172 of this chapter.
Short circuit means a direct connection between positive and
negative terminals of a cell or battery that provides an abnormally low
resistance path for current flow.
Siftproof packaging means a packaging impermeable to dry contents,
including fine solid material produced during transportation.
Single packaging means a non-bulk packaging other than a combination
packaging.
Solid means a material which is not a gas or a liquid.
Solution means any homogeneous liquid mixture of two or more
chemical compounds or elements that will not undergo any segregation
under conditions normal to transportation.
[[Page 131]]
Special permit means a document issued by the Associate
Administrator, the Associate Administrator's designee, or as otherwise
prescribed in the HMR, under the authority of 49 U.S.C. 5117 permitting
a person to perform a function that is not otherwise permitted under
subchapter A or C of this chapter, or other regulations issued under 49
U.S.C. 5101 et seq. (e.g., Federal Motor Carrier Safety routing
requirements).
Specification packaging means a packaging conforming to one of the
specifications or standards for packagings in part 178 or part 179 of
this subchapter.
Spontaneously combustible material. See Sec. 173.124(b) of this
subchapter.
Stabilized means that the hazardous material is in a condition that
precludes uncontrolled reaction. This may be achieved by methods such as
adding an inhibiting chemical, degassing the hazardous material to
remove dissolved oxygen and inerting the air space in the package, or
maintaining the hazardous material under temperature control.
State means a State of the United States, the District of Columbia,
the Commonwealth of Puerto Rico, the Commonwealth of the Northern
Mariana Islands, the Virgin Islands, American Samoa, Guam, or any other
territory or possession of the United States designated by the
Secretary.
State-designated route means a preferred route selected in
accordance with U.S. DOT ``Guidelines for Selecting Preferred Highway
Routes for Highway Route Controlled Quantities of Radioactive
Materials'' or an equivalent routing analysis which adequately considers
overall risk to the public.
Storage incidental to movement means storage of a transport vehicle,
freight container, or package containing a hazardous material by any
person between the time that a carrier takes physical possession of the
hazardous material for the purpose of transporting it in commerce until
the package containing the hazardous material is physically delivered to
the destination indicated on a shipping document, package marking, or
other medium, or, in the case of a private motor carrier, between the
time that a motor vehicle driver takes physical possession of the
hazardous material for the purpose of transporting it in commerce until
the driver relinquishes possession of the package at its destination and
is no longer responsible for performing functions subject to the HMR
with respect to that particular package.
(1) Storage incidental to movement includes--
(i) Storage at the destination shown on a shipping document,
including storage at a transloading facility, provided the shipping
documentation identifies the shipment as a through-shipment and
identifies the final destination or destinations of the hazardous
material; and
(ii) Rail cars containing hazardous materials that are stored on
track that does not meet the definition of ``private track or siding''
in Sec. 171.8, even if those cars have been delivered to the
destination shown on the shipping document.
(2) Storage incidental to movement does not include storage of a
hazardous material at its final destination as shown on a shipping
document.
Stowage means the act of placing hazardous materials on board a
vessel.
Strong outer packaging means the outermost enclosure that provides
protection against the unintentional release of its contents. It is a
packaging that is sturdy, durable, and constructed so that it will
retain its contents under normal conditions of transportation. In
addition, a strong outer packaging must meet the general packaging
requirements of subpart B of part 173 of this subchapter but need not
comply with the specification packaging requirements in part 178 of the
subchapter. For transport by aircraft, a strong outer packaging is
subject to Sec. 173.27 of this subchapter. The terms ``strong outside
container'' and ``strong outside packaging'' are synonymous with
``strong outer packaging.''
Subsidiary hazard means a hazard of a material other than the
primary hazard. (See primary hazard).
Table in Sec. 172.101 or Sec. 172.101 table means the Hazardous
Materials Table in Sec. 172.101 of this subchapter.
Technical name means a recognized chemical name or microbiological
[[Page 132]]
name currently used in scientific and technical handbooks, journals, and
texts. Generic descriptions are authorized for use as technical names
provided they readily identify the general chemical group, or
microbiological group. Examples of acceptable generic chemical
descriptions are organic phosphate compounds, petroleum aliphatic
hydrocarbons and tertiary amines. For proficiency testing only, generic
microbiological descriptions such as bacteria, mycobacteria, fungus, and
viral samples may be used. Except for names which appear in subpart B of
part 172 of this subchapter, trade names may not be used as technical
names.
TOFC means trailer-on-flat-car.
Top shell means the tank car tank surface, excluding the head ends
and bottom shell of the tank car tank.
Toxin. See Sec. 173.134 of this subchapter.
Trailership means a vessel, other than a carfloat, specifically
equipped to carry motor transport vehicles and fitted with installed
securing devices to tie down each vehicle. The term trailership includes
Roll-on/Roll-off (RO/RO) vessels.
Train means one or more engines coupled with one or more rail cars,
except during switching operations or where the operation is that of
classifying and assembling rail cars within a railroad yard for the
purpose of making or breaking up trains.
Train consist means a written record of the contents and location of
each rail car in a train.
Trainship means a vessel other than a rail car ferry or carfloat,
specifically equipped to transport railroad vehicles, and fitted with
installed securing devices to tie down each vehicle.
Transloading means the transfer of a hazardous material by any
person from one bulk packaging to another bulk packaging, from a bulk
packaging to a non-bulk packaging, or from a non-bulk packaging to a
bulk packaging for the purpose of continuing the movement of the
hazardous material in commerce.
Transport vehicle means a cargo-carrying vehicle such as an
automobile, van, tractor, truck, semitrailer, tank car or rail car used
for the transportation of cargo by any mode. Each cargo-carrying body
(trailer, rail car, etc.) is a separate transport vehicle.
Transportation or transport means the movement of property and
loading, unloading, or storage incidental to that movement.
UFC means Uniform Freight Classification.
UN means United Nations.
UN cylinder means a transportable pressure receptacle with a water
capacity not exceeding 150 L that has been marked and certified as
conforming to the applicable requirements in part 178 of this
subchapter.
UN portable tank means an intermodal tank having a capacity of more
than 450 liters (118.9 gallons). It includes a shell fitted with service
equipment and structural equipment, including stabilizing members
external to the shell and skids, mountings or accessories to facilitate
mechanical handling. A UN portable tank must be capable of being filled
and discharged without the removal of its structural equipment and must
be capable of being lifted when full. Cargo tanks, rail tank car tanks,
non-metallic tanks, non-specification tanks, bulk bins, and IBCs and
packagings made to cylinder specifications are not UN portable tanks.
UN pressure receptacle means a UN cylinder or tube.
UN Recommendations means the UN Recommendations on the Transport of
Dangerous Goods (IBR, see Sec. 171.7).
UN standard packaging means a packaging conforming to standards in
the UN Recommendations (IBR, see Sec. 171.7).
UN tube means a transportable pressure receptacle of seamless or
composite construction having with a water capacity exceeding 150 L
(39.6 gallons) but not more than 3,000 L (792.5 gallons) that has been
marked and certified as conforming to the requirements in part 178 of
this subchapter.
Undeclared hazardous material means a hazardous material that is:
(1) Subject to any of the hazard communication requirements in subparts
C (Shipping Papers), D (Marking), E (Labeling), and F (Placarding) of
part 172 of this subchapter, or an alternative marking requirement in
part 173 of this subchapter (such as Sec. Sec. 173.4(a)(10) and
[[Page 133]]
173.6(c)); and (2) offered for transportation in commerce without any
visible indication to the person accepting the hazardous material for
transportation that a hazardous material is present, on either an
accompanying shipping document, or the outside of a transport vehicle,
freight container, or package.
Unintentional release means the escape of a hazardous material from
a package on an occasion not anticipated or planned. This includes
releases resulting from collision, package failures, human error,
criminal activity, negligence, improper packing, or unusual conditions
such as the operation of pressure relief devices as a result of over-
pressurization, overfill or fire exposure. It does not include releases,
such as venting of packages, where allowed, and the operational
discharge of contents from packages.
Unit load device means any type of freight container, aircraft
container, aircraft pallet with a net, or aircraft pallet with a net
over an igloo.
United States means a State of the United States, the District of
Columbia, the Commonwealth of Puerto Rico, the Commonwealth of the
Northern Mariana Islands, the Virgin Islands, American Samoa, Guam, or
any other territory or possession of the United States designated by the
Secretary.
Unloading incidental to movement means removing a packaged or
containerized hazardous material from a transport vehicle, aircraft, or
vessel, or for a bulk packaging, emptying a hazardous material from the
bulk packaging after the hazardous material has been delivered to the
consignee when performed by carrier personnel or in the presence of
carrier personnel or, in the case of a private motor carrier, while the
driver of the motor vehicle from which the hazardous material is being
unloaded immediately after movement is completed is present during the
unloading operation. (Emptying a hazardous material from a bulk
packaging while the packaging is on board a vessel is subject to
separate regulations as delegated by Department of Homeland Security
Delegation No. 0170.1 at 2(103).) Unloading incidental to movement
includes transloading.
Vessel includes every description of watercraft, used or capable of
being used as a means of transportation on the water.
Viscous liquid means a liquid material which has a measured
viscosity in excess of 2500 centistokes at 25 [deg]C. (77 [deg]F.) when
determined in accordance with the procedures specified in ASTM Method D
445-72 ``Kinematic Viscosity of Transparent and Opaque Liquids (and the
Calculation of Dynamic Viscosity)'' or ASTM Method D 1200-70 ``Viscosity
of Paints, Varnishes, and Lacquers by Ford Viscosity Cup.''
Volatility refers to the relative rate of evaporation of materials
to assume the vapor state.
Water reactive material. See Sec. 173.124(c) of this subchapter.
Water resistant means having a degree of resistance to permeability
by and damage caused by water in liquid form.
Watt-hour (Wh) means a unit of energy equivalent to one watt (1 W)
of work acting for one hour (1 h) of time. The Watt-hour rating of a
lithium ion cell or battery is determined by multiplying the rated
capacity of a cell or battery in ampere-hours, by its nominal voltage.
Therefore, Watt-hour (Wh) = ampere-hour (Ah) x volts (V).
Wooden barrel means a packaging made of natural wood, of round
cross-section, having convex walls, consisting of staves and heads and
fitted with hoops.
Working pressure for purposes of UN pressure receptacles, means the
settled pressure of a compressed gas at a reference temperature of 15
[deg]C (59 [deg]F).
W.T. means watertight.
[Amdt. 171-32, 41 FR 15994, Apr. 15, 1976]
Editorial Note: For Federal Register citations affecting Sec.
171.8, see the List of CFR Sections Affected, which appears in the
Finding Aids section of the printed volume and at www.fdsys.gov.
Sec. 171.9 Rules of construction.
(a) In this subchapter, unless the context requires otherwise:
(1) Words imparting the singular include the plural;
(2) Words imparting the plural include the singular; and
(3) Words imparting the masculine gender include the feminine;
[[Page 134]]
(b) In this subchapter, the word: (1) ``Shall'' is used in an
imperative sense;
(2) ``Must'' is used in an imperative sense;
(3) ``Should'' is used in a recommendatory sense;
(4) ``May'' is used in a permissive sense to state authority or
permission to do the act described, and the words ``no person may * *
*'' or ``a person may not * * *'' means that no person is required,
authorized, or permitted to do the act described; and
(5) ``Includes'' is used as a word of inclusion not limitation.
[Amdt. 171-32, 41 FR 15996, Apr. 15, 1976, as amended by Amdt. 171-32A,
41 FR 40630, Sept. 20, 1976; Amdt. 171-121, 58 FR 51528, Oct. 1, 1993;
75 FR 60338, Sept. 30, 2010]
Sec. 171.10 Units of measure.
(a) General. To ensure compatibility with international
transportation standards, most units of measure in this subchapter are
expressed using the International System of Units (``SI'' or metric).
Where SI units appear, they are the regulatory standard. U.S. standard
or customary units, which appear in parentheses following the SI units,
are for information only and are not intended to be the regulatory
standard.
(b) Abbreviations for SI units of measure generally used throughout
this subchapter are as shown in paragraph (c) of this section. Customary
units shown throughout this subchapter are generally not abbreviated.
(c) Conversion values. (1) Conversion values are provided in the
following table and are based on values provided in ASTM E 380,
``Standard for Metric Practice''.
(2) If an exact conversion is needed, the following conversion table
should be used.
Table of Conversion Factors for SI Units
----------------------------------------------------------------------------------------------------------------
Measurement SI to U.S. standard U.S. standard to SI
----------------------------------------------------------------------------------------------------------------
Activity........................... 1 TBq = 27 Ci.............. 1 Ci = 0.037 TBq
Length............................. 1 cm = 0.3937008 in........ 1 in = 2.540000 cm
1 m = 3.280840 ft.......... 1 ft = 0.3048000 m
Thickness.......................... 1 mm = 0.03937008 in....... 1 in = 25.40000 mm
Mass (weight)...................... 1 kg = 2.204622 lb......... 1 lb = 0.4535924 kg
1 g = 0.03527397 oz........ 1 oz = 28.34952 g
Pressure........................... 1 kPa = 0.1450377 psi...... 1 psi = 6.894757 kPa
1 Bar = 100 kPa = 14.504 1 psi = 0.06895 Bar
psi.
1 kPa = 7.5 mm Hg..........
Radiation level.................... 1 Sv/hr = 100 rem/hr....... 1 rem/hr = 0.01 Sv/hr
Volume (liquid).................... 1 L = 0.2641720 gal........ 1 gal = 3.785412 L
1 mL = 0.03381402 oz....... 1 oz = 29.57353 mL
1 m\3\ = 35.31466 ft\3\.... 1 ft\3\ = 0.02831685 m\3\
Density............................ 1 kg/m\3\ = 0.06242797 lb/ 1 lb/ft\3\ = 16.01846 kg/m\3\
ft\3\.
Force.............................. 1 Newton = 0.2248 Pound- 1 Pound-force = 4.483 N
force.
----------------------------------------------------------------------------------------------------------------
Abbreviation for units of measure are as follows:
Unit of measure and abbreviation:
(SI): millimeter, mm; centimeter, cm; meter, m; gram, g; kilogram, kg; kiloPascal, kPa; liter, L; milliliter,
mL; cubic meter, m\3\; Terabecquerel, TBq; Gigabecquerel, GBq; millisievert, mSv; Newton, N;
(U.S.): Inch, in; foot, ft; ounce, oz; pound, lb; psig, psi; gallon, gal; cubic feet, ft \3\; Curie, Ci;
millicurie, mCi; millirem, mrem.
[Amdt. 171-111, 56 FR 66159, Dec. 20, 1991, as amended by Amdt. 171-136,
60 FR 49108, Sept. 21, 1995; Amdt. 171-135, 60 FR 50302, Sept. 28, 1995;
66 FR 33335, June 21, 2001; 66 FR 45378, Aug. 28, 2001; 68 FR 75740,
Dec. 31, 2003]
Sec. 171.11 [Reserved]
Sec. 171.12 North American Shipments.
(a) Requirements for the use of the Transport Canada TDG
Regulations. (1) A hazardous material transported from Canada to the
United States, from the United States to Canada, or transiting the
United States to Canada or a foreign destination may be offered for
transportation or transported by motor carrier and rail in accordance
with the Transport Canada TDG Regulations (IBR, see Sec. 171.7) or an
equivalency certificate (permit for equivalent level of safety) issued
under the TDG Regulations, as authorized in Sec. 171.22, provided the
requirements in Sec. Sec. 171.22 and 171.23, as applicable, and this
section are met. In addition, a cylinder, MEGC, cargo
[[Page 135]]
tank motor vehicle, portable tank or rail tank car authorized by the
Transport Canada TDG Regulations may be used for transportation to,
from, or within the United States provided the cylinder, MEGC, cargo
tank motor vehicle, portable tank or rail tank car conforms to the
applicable requirements of this section. Except as otherwise provided in
this subpart and subpart C of this part, the requirements in parts 172,
173, and 178 of this subchapter do not apply for a material transported
in accordance with the Transport Canada TDG Regulations.
(2) General packaging requirements. When the provisions of this
subchapter require a DOT specification or UN standard packaging to be
used for transporting a hazardous material, a packaging authorized by
the Transport Canada TDG Regulations may be used, subject to the
limitations of this part, and only if it is equivalent to the
corresponding DOT specification or UN packaging (see Sec. 173.24(d)(2)
of this subchapter) authorized by this subchapter.
(3) Bulk packagings. A portable tank, cargo tank motor vehicle or
rail tank car equivalent to a corresponding DOT specification and
conforming to and authorized by the Transport Canada TDG Regulations may
be used provided--
(i) An equivalent type of packaging is authorized for the hazardous
material according to the Sec. 172.101 table of this subchapter;
(ii) The portable tank, cargo tank motor vehicle or rail tank car
conforms to the requirements of the applicable part 173 bulk packaging
section specified in the Sec. 172.101 table for the material to be
transported;
(iii) The portable tank, cargo tank motor vehicle or rail tank car
conforms to the requirements of all assigned bulk packaging special
provisions (B codes, and T and TP codes) in Sec. 172.102 of this
subchapter; and
(iv) The bulk packaging conforms to all applicable requirements of
Sec. Sec. 173.31, 173.32, 173.33 and 173.35 of this subchapter, and
parts 177 and 180 of this subchapter. The periodic retests and
inspections required by Sec. Sec. 173.31, 173.32 and 173.33 of this
subchapter may be performed in accordance with part 180 of this
subchapter or in accordance with the requirements of the TDG Regulations
provided that the intervals prescribed in part 180 of this subchapter
are met.
(v) Rail tank cars must conform to the requirements of Canadian
General Standards Board standard 43.147 (IBR, see Sec. 171.7).
(4) Cylinders and MEGCs. When the provisions of this subchapter
require that a DOT specification or a UN pressure receptacle must be
used for a hazardous material, a packaging authorized by the Transport
Canada TDG Regulations may be used only if it corresponds to the DOT
specification or UN standard authorized by this subchapter. Unless
otherwise excepted in this subchapter, a cylinder (including a UN
pressure receptacle) or MEGC may not be transported unless--
(i) The packaging is a UN pressure receptacle or MEGC marked with
the letters ``CAN'' for Canada as a country of manufacture or a country
of approval or is a cylinder that was manufactured, inspected and tested
in accordance with a DOT specification or a UN standard prescribed in
part 178 of this subchapter, except that cylinders not conforming to
these requirements must meet the requirements in Sec. 171.23. Each
cylinder must conform to the applicable requirements in part 173 of this
subchapter for the hazardous material involved.
(ii) A Canadian Railway Commission (CRC), Board of Transport
Commissioners for Canada (BTC), Canadian Transport Commission (CTC) or
Transport Canada (TC) specification cylinder manufactured, originally
marked, and approved in accordance with the TDG Regulations, and in full
conformance with the TDG Regulations is authorized for transportation
to, from or within the United States provided:
(A) The CRC, BTC, CTC or TC specification cylinder corresponds with
a DOT specification cylinder and the markings are the same as those
specified in this subchapter, except that the original markings were
``CRC'', ``BTC'', ``CTC'', or ``TC'';
(B) The cylinder has been requalified under a program authorized by
the TDG Regulations or subpart I of part 107 of this chapter;
[[Page 136]]
(C) When the regulations authorize a cylinder for a specific
hazardous material with a specification marking prefix of ``DOT,'' a
cylinder marked ``CRC'', ``BTC'', ``CTC'', or ``TC'' otherwise bearing
the same markings required of the specified ``DOT'' cylinder may be
used; and
(D) Transport of the cylinder and the material it contains is in all
other respects in conformance with the requirements of this subchapter
(e.g. valve protection, filling requirements, operational requirements,
etc.).
(iii) Authorized CRC, BTC, CTC or TC specification cylinders that
correspond with a DOT specification cylinder are as follows:
----------------------------------------------------------------------------------------------------------------
DOT (some or all of these CTC (some or all of these
TC specifications may instead be marked specifications may instead be marked
with the prefix ICC) with the prefix BTC or CRC)
----------------------------------------------------------------------------------------------------------------
TC-3AM........................... DOT-3A [ICC-3] CTC-3A
TC-3AAM.......................... DOT-3AA CTC-3AA
TC-3ANM.......................... DOT-3BN CTC-3BN
TC-3EM........................... DOT-3E CTC-3E
TC-3HTM.......................... DOT-3HT CTC-3HT
TC-3ALM.......................... DOT-3AL CTC-3AL
DOT-3B CTC-3B
TC-3AXM.......................... DOT-3AX CTC-3AX
TC-3AAXM......................... DOT-3AAX CTC-3AAX
DOT-3A480X CTC-3A480X
TC-3TM........................... DOT-3T
TC-4AAM33........................ DOT-4AA480 CTC-4AA480
TC-4BM........................... DOT-4B CTC-4B
TC-4BM17ET....................... DOT-4B240ET CTC-4B240ET
TC-4BAM.......................... DOT-4BA CTC-4BA
TC-4BWM.......................... DOT-4BW CTC-4BW
TC-4DM........................... DOT-4D CTC-4D
TC-4DAM.......................... DOT-4DA CTC-4DA
TC-4DSM.......................... DOT-4DS CTC-4DS
TC-4EM........................... DOT-4E CTC-4E
TC-39M........................... DOT-39 CTC-39
TC-4LM........................... DOT-4L CTC-4L
DOT-8 CTC-8
DOT-8AL CTC-8AL
----------------------------------------------------------------------------------------------------------------
(5) Class 1 (explosive) materials. When transporting Class 1
(explosive) material, rail and motor carriers must comply with 49 CFR
1572.9 and 1572.11 to the extent the requirements apply.
(6) Lithium metal cells and batteries. Lithium metal cells and
batteries (UN3090) are forbidden for transport aboard passenger-carrying
aircraft. The outside of each package that contains lithium cells or
batteries meeting the conditions for exception in Sec. 173.185(c) of
this subchapter and transported in accordance with the Transport Canada
TDG Regulations must be marked in accordance with Sec.
173.185(c)(1)(iii) or (c)(1)(iv) as appropriate.
(b) Shipments to or from Mexico. Unless otherwise excepted,
hazardous materials shipments from Mexico to the United States or from
the United States to Mexico must conform to all applicable requirements
of this subchapter. When a hazardous material that is a material
poisonous by inhalation (see Sec. 171.8) is transported by highway or
rail from Mexico to the United States, or from the United States to
Mexico, the following requirements apply:
(1) The shipping description must include the words ``Toxic
Inhalation Hazard'' or ``Poison-Inhalation Hazard'' or ``Inhalation
Hazard'', as required in Sec. 172.203(m) of this subchapter.
(2) The material must be packaged in accordance with requirements of
this subchapter.
(3) The package must be marked in accordance with Sec. 172.313 of
this subchapter.
(4) Except as provided in paragraph (e)(5) of this section, the
package must be labeled or placarded POISON GAS or POISON INHALATION
HAZARD, as
[[Page 137]]
appropriate, in accordance with subparts E and F of this subchapter.
(5) A label or placard that conforms to the UN Recommendations (IBR,
see Sec. 171.7) specifications for a ``Division 2.3'' or ``Division
6.1'' label or placard may be substituted for the POISON GAS or POISON
INHALATION HAZARD label or placard required by Sec. Sec. 172.400(a) and
172.504(e) of this subchapter on a package transported in a closed
transport vehicle or freight container. The transport vehicle or freight
container must be marked with identification numbers for the material,
regardless of the total quantity contained in the transport vehicle or
freight container, in the manner specified in Sec. 172.313(c) of this
subchapter and placarded as required by subpart F of this subchapter.
[Amdt. 171-111, 55 FR 52472, Dec. 21, 1990]
Editorial Note: For Federal Register citations affecting Sec.
171.12, see the List of CFR Sections Affected, which appears in the
Finding Aids section of the printed volume and at www.fdsys.gov.
Sec. 171.12a [Reserved]
Sec. 171.14 [Reserved]
Subpart B_Incident Reporting, Notification, BOE Approvals and
Authorization
Sec. 171.15 Immediate notice of certain hazardous materials incidents.
(a) General. As soon as practical but no later than 12 hours after
the occurrence of any incident described in paragraph (b) of this
section, each person in physical possession of the hazardous material
must provide notice by telephone to the National Response Center (NRC)
on 800-424-8802 (toll free) or 202-267-2675 (toll call) or online at
http://www.nrc.uscg.mil. Each notice must include the following
information:
(1) Name of reporter;
(2) Name and address of person represented by reporter;
(3) Phone number where reporter can be contacted;
(4) Date, time, and location of incident;
(5) The extent of injury, if any;
(6) Class or division, proper shipping name, and quantity of
hazardous materials involved, if such information is available; and
(7) Type of incident and nature of hazardous material involvement
and whether a continuing danger to life exists at the scene.
(b) Reportable incident. A telephone report is required whenever any
of the following occurs during the course of transportation in commerce
(including loading, unloading, and temporary storage):
(1) As a direct result of a hazardous material--
(i) A person is killed;
(ii) A person receives an injury requiring admittance to a hospital;
(iii) The general public is evacuated for one hour or more;
(iv) A major transportation artery or facility is closed or shut
down for one hour or more; or
(v) The operational flight pattern or routine of an aircraft is
altered;
(2) Fire, breakage, spillage, or suspected radioactive contamination
occurs involving a radioactive material (see also Sec. 176.48 of this
subchapter);
(3) Fire, breakage, spillage, or suspected contamination occurs
involving an infectious substance other than a regulated medical waste;
(4) A release of a marine pollutant occurs in a quantity exceeding
450 L (119 gallons) for a liquid or 400 kg (882 pounds) for a solid;
(5) A situation exists of such a nature (e.g., a continuing danger
to life exists at the scene of the incident) that, in the judgment of
the person in possession of the hazardous material, it should be
reported to the NRC even though it does not meet the criteria of
paragraphs (b)(1), (2), (3) or (4) of this section; or
(6) During transportation by aircraft, a fire, violent rupture,
explosion or dangerous evolution of heat (i.e., an amount of heat
sufficient to be dangerous to packaging or personal safety to include
charring of packaging, melting of packaging, scorching of packaging, or
other evidence) occurs as a direct result of a battery or battery-
powered device.
(c) Written report. Each person making a report under this section
must also make the report required by Sec. 171.16 of this subpart.
[[Page 138]]
Note to Sec. 171.15: Under 40 CFR 302.6, EPA requires persons in
charge of facilities (including transport vehicles, vessels, and
aircraft) to report any release of a hazardous substance in a quantity
equal to or greater than its reportable quantity, as soon as that person
has knowledge of the release, to DOT's National Response Center at (toll
free) 800-424-8802 or (toll) 202-267-2675.
[68 FR 67759, Dec. 3, 2003, as amended at 72 FR 55684, Oct. 1, 2007; 74
FR 2233, Jan. 14, 2009; 74 FR 53186, Oct. 16, 2009; 76 FR 43525, July
20, 2011]
Sec. 171.16 Detailed hazardous materials incident reports.
(a) General. Each person in physical possession of a hazardous
material at the time that any of the following incidents occurs during
transportation (including loading, unloading, and temporary storage)
must submit a Hazardous Materials Incident Report on DOT Form F 5800.1
(01/2004) within 30 days of discovery of the incident:
(1) Any of the circumstances set forth in Sec. 171.15(b);
(2) An unintentional release of a hazardous material or the
discharge of any quantity of hazardous waste;
(3) A specification cargo tank with a capacity of 1,000 gallons or
greater containing any hazardous material suffers structural damage to
the lading retention system or damage that requires repair to a system
intended to protect the lading retention system, even if there is no
release of hazardous material;
(4) An undeclared hazardous material is discovered; or
(5) A fire, violent rupture, explosion or dangerous evolution of
heat (i.e., an amount of heat sufficient to be dangerous to packaging or
personal safety to include charring of packaging, melting of packaging,
scorching of packaging, or other evidence) occurs as a direct result of
a battery or battery-powered device.
(b) Providing and retaining copies of the report. Each person
reporting under this section must--
(1) Submit a written Hazardous Materials Incident Report to the
Information Systems Manager, PHH-60, Pipeline and Hazardous Materials
Safety Administration, Department of Transportation, East Building, 1200
New Jersey Ave., SE., Washington, DC 20590-0001, or an electronic
Hazardous Material Incident Report to the Information System Manager,
PHH-60, Pipeline and Hazardous Materials Safety Administration,
Department of Transportation, Washington, DC 20590-0001 at http://
hazmat.dot.gov;
(2) For an incident involving transportation by aircraft, submit a
written or electronic copy of the Hazardous Materials Incident Report to
the FAA Security Field Office nearest the location of the incident; and
(3) Retain a written or electronic copy of the Hazardous Materials
Incident Report for a period of two years at the reporting person's
principal place of business. If the written or electronic Hazardous
Materials Incident Report is maintained at other than the reporting
person's principal place of business, the report must be made available
at the reporting person's principal place of business within 24 hours of
a request for the report by an authorized representative or special
agent of the Department of Transportation.
(c) Updating the incident report. A Hazardous Materials Incident
Report must be updated within one year of the date of occurrence of the
incident whenever:
(1) A death results from injury caused by a hazardous material;
(2) There was a misidentification of the hazardous material or
package information on a prior incident report;
(3) Damage, loss or related cost that was not known when the initial
incident report was filed becomes known; or
(4) Damage, loss, or related cost changes by $25,000 or more, or 10%
of the prior total estimate, whichever is greater.
(d) Exceptions. Unless a telephone report is required under the
provisions of Sec. 171.15 of this part, the requirements of paragraphs
(a), (b), and (c) of this section do not apply to the following
incidents:
(1) A release of a minimal amount of material from--
(i) A vent, for materials for which venting is authorized;
(ii) The routine operation of a seal, pump, compressor, or valve; or
(iii) Connection or disconnection of loading or unloading lines,
provided
[[Page 139]]
that the release does not result in property damage.
(2) An unintentional release of a hazardous material when:
(i) The material is--
(A) A limited quantity material packaged under authorized exceptions
in the Sec. 172.101 Hazardous Materials Table of this subchapter
excluding Class 7 (radioactive) material; or
(B) A Packing Group III material in Class or Division 3, 4, 5, 6.1,
8, or 9;
(ii) The material is released from a package having a capacity of
less than 20 liters (5.2 gallons) for liquids or less than 30 kg (66
pounds) for solids;
(iii) The total amount of material released is less than 20 liters
(5.2 gallons) for liquids or less than 30 kg (66 pounds) for solids; and
(iv) The material is not--
(A) Offered for transportation or transported by aircraft;
(B) A hazardous waste; or
(C) An undeclared hazardous material;
(3) An undeclared hazardous material discovered in an air
passenger's checked or carry-on baggage during the airport screening
process. (For discrepancy reporting by carriers, see Sec. 175.31 of
this subchapter.)
[68 FR 67759, Dec. 3, 2003; 69 FR 30119, May 26, 2004, as amended at 70
FR 56091, Sept. 23, 2005; 74 FR 2233, Jan. 14, 2009; 76 FR 56311, Sept.
13, 2011; 78 FR 1112, Jan. 7, 2013]
Sec. Sec. 171.17-171.18 [Reserved]
Sec. 171.19 Approvals or authorizations issued by the Bureau of Explosives.
Effective December 31, 1998, approvals or authorizations issued by
the Bureau of Explosives (BOE), other than those issued under part 179
of this subchapter, are no longer valid.
[63 FR 37459, July 10, 1998]
Sec. 171.20 Submission of Examination Reports.
(a) When it is required in this subchapter that the issuance of an
approval by the Associate Administrator be based on an examination by
the Bureau of Explosives (or any other test facility recognized by
PHMSA), it is the responsibility of the applicant to submit the results
of the examination to the Associate Administrator.
(b) Applications for approval submitted under paragraph (a) of this
section, must be submitted to the Associate Administrator for Hazardous
Materials Safety, Pipeline and Hazardous Materials Safety
Administration, Washington, DC 20590-0001.
(c) Any applicant for an approval aggrieved by an action taken by
the Associate Administrator, under this subpart may file an appeal with
the Administrator, PHMSA within 30 days of service of notification of a
denial.
[Amdt. 171-54, 45 FR 32692, May 19, 1980, as amended by Amdt. 171-66, 47
FR 43064, Sept. 30, 1982; Amdt. 171-109, 55 FR 39978, Oct. 1, 1990;
Amdt. 171-111, 56 FR 66162, Dec. 20, 1991; 66 FR 45378, Aug. 28, 2001]
Sec. 171.21 Assistance in investigations and special studies.
(a) A shipper, carrier, package owner, package manufacturer or
certifier, repair facility, or person reporting an incident under the
provisions of Sec. 171.16 must:
(1) Make all records and information pertaining to the incident
available to an authorized representative or special agent of the
Department of Transportation upon request; and
(2) Give an authorized representative or special agent of the
Department of Transportation reasonable assistance in the investigation
of the incident.
(b) If an authorized representative or special agent of the
Department of Transportation makes an inquiry of a person required to
complete an incident report in connection with a study of incidents, the
person shall:
(1) Respond to the inquiry within 30 days after its receipt or
within such other time as the inquiry may specify; and
(2) Provide true and complete answers to any questions included in
the inquiry.
[68 FR 67760, Dec. 3, 2003]
Subpart C_Authorization and Requirements for the Use of International
Transport Standards and Regulations
Source: 72 FR 25172, May 3, 2007, unless otherwise noted.
[[Page 140]]
Sec. 171.22 Authorization and conditions for the use
of international standards and regulations.
(a) Authorized international standards and regulations. This subpart
authorizes, with certain conditions and limitations, the offering for
transportation and the transportation in commerce of hazardous materials
in accordance with the International Civil Aviation Organization's
Technical Instructions for the Safe Transport of Dangerous Goods by Air
(ICAO Technical Instructions), the International Maritime Dangerous
Goods Code (IMDG Code), Transport Canada's Transportation of Dangerous
Goods Regulations (Transport Canada TDG Regulations), and the
International Atomic Energy Agency Regulations for the Safe Transport of
Radioactive Material (IAEA Regulations) (IBR, see Sec. 171.7).
(b) Limitations on the use of international standards and
regulations. A hazardous material that is offered for transportation or
transported in accordance with the international standards and
regulations authorized in paragraph (a) of this section--
(1) Is subject to the requirements of the applicable international
standard or regulation and must be offered for transportation or
transported in conformance with the applicable standard or regulation;
and
(2) Must conform to all applicable requirements of this subpart.
(c) Materials excepted from regulation under international standards
and regulations. A material designated as a hazardous material under
this subchapter, but excepted from or not subject to the international
transport standards and regulations authorized in paragraph (a) of this
section (e.g., paragraph 1.16 of the Transport Canada TDG Regulations
excepts from regulation quantities of hazardous materials less than or
equal to 500 kg gross transported by rail) must be transported in
accordance with all applicable requirements of this subchapter.
(d) Materials not regulated under this subchapter. Materials not
designated as hazardous materials under this subchapter but regulated by
an international transport standard or regulation authorized in
paragraph (a) of this section may be offered for transportation and
transported in the United States in full compliance (i.e., packaged,
marked, labeled, classed, described, stowed, segregated, secured) with
the applicable international transport standard or regulation.
(e) Forbidden materials. No person may offer for transportation or
transport a hazardous material that is a forbidden material or package
as designated in--
(1) Section 173.21 of this subchapter;
(2) Column (3) of the Sec. 172.101 Table of this subchapter;
(3) Column (9A) of the Sec. 172.101 Table of this subchapter when
offered for transportation or transported on passenger aircraft or
passenger railcar; or
(4) Column (9B) of the Sec. 172.101 Table of this subchapter when
offered for transportation or transported by cargo aircraft.
(f) Complete information and certification. (1) Except for shipments
into the United States from Canada conforming to Sec. 171.12, each
person importing a hazardous material into the United States must
provide the shipper, and the forwarding agent at the place of entry into
the United States, timely and complete written information as to the
requirements of this subchapter applicable to the particular shipment.
(2) The shipper, directly or through the forwarding agent at the
place of entry, must provide the initial U.S. carrier with the shipper's
certification required by Sec. 172.204 of this subchapter, unless the
shipment is otherwise excepted from the certification requirement.
Except for shipments for which the certification requirement does not
apply, a carrier may not accept a hazardous material for transportation
unless provided a shipper's certification.
(3) All shipping paper information and package markings required in
accordance with this subchapter must be in English. The use of shipping
papers and a package marked with both English and a language other than
English, in order to dually comply with this subchapter and the
regulations of a foreign entity, is permitted under this subchapter.
(4) Each person who provides for transportation or receives for
transportation (see Sec. Sec. 174.24, 175.30, 176.24 and
[[Page 141]]
177.817 of this subchapter) a shipping paper must retain a copy of the
shipping paper or an electronic image thereof that is accessible at or
through its principal place of business in accordance with Sec.
172.201(e) of this subchapter.
(g) Additional requirements for the use of international standards
and regulations. All shipments offered for transportation or transported
in the United States in accordance with this subpart must conform to the
following requirements of this subchapter, as applicable:
(1) The emergency response information requirements in subpart G of
part 172 of this subchapter;
(2) The training requirements in subpart H of part 172 of this
subchapter, including function-specific training in the use of the
international transport standards and regulations authorized in
paragraph (a) of this section, as applicable;
(3) The security requirements in subpart I of part 172 of this
subchapter;
(4) The incident reporting requirements in Sec. Sec. 171.15 and
171.16 of this part for incidents occurring within the jurisdiction of
the United States including on board vessels in the navigable waters of
the United States and aboard aircraft of United States registry anywhere
in air commerce;
(5) For export shipments, the general packaging requirements in
Sec. Sec. 173.24 and 173.24a of this subchapter;
(6) For export shipments, the requirements for the reuse,
reconditioning, and remanufacture of packagings in Sec. 173.28 of this
subchapter; and
(7) The registration requirements in subpart G of part 107 of this
chapter.
[72 FR 25172, May 3, 2007, as amended at 72 FR 55091 Sept. 28, 2007; 74
FR 53186, Oct. 16, 2009; 76 FR 56311, Sept. 13, 2011; 80 FR 72920, Nov.
23, 2015; 81 FR 35513, June 2, 2016]
Sec. 171.23 Requirements for specific materials and packagings
transported under the ICAO Technical Instructions, IMDG Code,
Transport Canada TDG Regulations, or the IAEA Regulations.
All shipments offered for transportation or transported in the
United States under the ICAO Technical Instructions, IMDG Code,
Transport Canada TDG Regulations, or the IAEA Regulations (IBR, see
Sec. 171.7) must conform to the requirements of this section, as
applicable.
(a) Conditions and requirements for cylinders. (1) Except as
provided in this paragraph (a), a filled cylinder (pressure receptacle)
manufactured to other than a DOT specification or a UN standard in
accordance with part 178 of this subchapter, a DOT exemption or special
permit cylinder, a TC, CTC, CRC, or BTC cylinder authorized under Sec.
171.12, or a cylinder used as a fire extinguisher in conformance with
Sec. 173.309(a) of this subchapter, may not be transported to, from, or
within the United States.
(2) Cylinders (including UN pressure receptacles) transported to,
from, or within the United States must conform to the applicable
requirements of this subchapter. Unless otherwise excepted in this
subchapter, a cylinder must not be transported unless--
(i) The cylinder is manufactured, inspected and tested in accordance
with a DOT specification or a UN standard prescribed in part 178 of this
subchapter, or a TC, CTC, CRC, or BTC specification set out in the
Transport Canada TDG Regulations (IBR, see Sec. 171.7), except that
cylinders not conforming to these requirements must meet the
requirements in paragraph (a)(3), (4), or (5) of this section;
(ii) The cylinder is equipped with a pressure relief device in
accordance with Sec. 173.301(f) of this subchapter and conforms to the
applicable requirements in part 173 of this subchapter for the hazardous
material involved;
(iii) The openings on an aluminum cylinder in oxygen service conform
to the requirements of this paragraph, except when the cylinder is used
for aircraft parts or used aboard an aircraft in accordance with the
applicable airworthiness requirements and operating regulations. An
aluminum DOT specification cylinder must have an opening configured with
straight (parallel) threads. A UN pressure receptacle may have straight
(parallel) or tapered threads provided the UN pressure receptacle is
marked with the thread type, e.g. ``17E, 25E, 18P, or 25P'' and fitted
with the properly marked valve; and
(iv) A UN pressure receptacle is marked with ``USA'' as a country of
[[Page 142]]
approval in conformance with Sec. Sec. 178.69 and 178.70 of this
subchapter, or ``CAN'' for Canada.
(3) Importation of cylinders for discharge within a single port
area. A cylinder manufactured to other than a DOT specification or UN
standard in accordance with part 178 of this subchapter, or a TC, CTC,
BTC, or CRC specification cylinder set out in the Transport Canada TDG
Regulations (IBR, see Sec. 171.7), and certified as being in
conformance with the transportation regulations of another country may
be authorized, upon written request to and approval by the Associate
Administrator, for transportation within a single port area, provided--
(i) The cylinder is transported in a closed freight container;
(ii) The cylinder is certified by the importer to provide a level of
safety at least equivalent to that required by the regulations in this
subchapter for a comparable DOT, TC, CTC, BTC, or CRC specification or
UN cylinder; and
(iii) The cylinder is not refilled for export unless in compliance
with paragraph (a)(4) of this section.
(4) Filling of cylinders for export or for use on board a vessel. A
cylinder not manufactured, inspected, tested and marked in accordance
with part 178 of this subchapter, or a cylinder manufactured to other
than a UN standard, DOT specification, exemption or special permit, or
other than a TC, CTC, BTC, or CRC specification, may be filled with a
gas in the United States and offered for transportation and transported
for export or alternatively, for use on board a vessel, if the following
conditions are met:
(i) The cylinder has been requalified and marked with the month and
year of requalification in accordance with subpart C of part 180 of this
subchapter, or has been requalified as authorized by the Associate
Administrator;
(ii) In addition to other requirements of this subchapter, the
maximum filling density, service pressure, and pressure relief device
for each cylinder conform to the requirements of this part for the gas
involved; and
(iii) The bill of lading or other shipping paper identifies the
cylinder and includes the following certification: ``This cylinder has
(These cylinders have) been qualified, as required, and filled in
accordance with the DOT requirements for export.''
(5) Cylinders not equipped with pressure relief devices. A DOT
specification or a UN cylinder manufactured, inspected, tested and
marked in accordance with part 178 of this subchapter and otherwise
conforms to the requirements of part 173 of this subchapter for the gas
involved, except that the cylinder is not equipped with a pressure
relief device may be filled with a gas and offered for transportation
and transported for export if the following conditions are met:
(i) Each DOT specification cylinder or UN pressure receptacle must
be plainly and durably marked ``For Export Only'';
(ii) The shipping paper must carry the following certification:
``This cylinder has (These cylinders have) been retested and refilled in
accordance with the DOT requirements for export.''; and
(iii) The emergency response information provided with the shipment
and available from the emergency response telephone contact person must
indicate that the pressure receptacles are not fitted with pressure
relief devices and provide appropriate guidance for exposure to fire.
(b) Conditions and requirements specific to certain materials--(1)
Aerosols. Except for a limited quantity of a compressed gas in a
container of not more than 4 fluid ounces capacity meeting the
requirements in Sec. 173.306(a)(1) of this subchapter, the proper
shipping name ``Aerosol,'' UN1950, may be used only for a non-refillable
receptacle containing a gas compressed, liquefied, or dissolved under
pressure the sole purpose of which is to expel a nonpoisonous (other
than Division 6.1, Packing Group III material) liquid, paste, or powder
and fitted with a self-closing release device (see Sec. 171.8). In
addition, an aerosol must be in a metal packaging when the packaging
exceeds 7.22 cubic inches.
(2) Safety devices for vehicles, vessels or aircraft, e.g. air bag
inflators, air bag modules, seat-belt pretensioners, and pyromechanical
devices. For each safety device, the shipping paper description
[[Page 143]]
must conform to the requirements in Sec. 173.166(c) of this subchapter.
(3) Chemical oxygen generators. Chemical oxygen generators must be
approved, classed, described, packaged, and transported in accordance
with the requirements of this subchapter.
(4) Class 1 (explosive) materials. Prior to being transported, Class
1 (explosive) materials must be approved by the Associate Administrator
in accordance with Sec. 173.56 of this subchapter. Each package
containing a Class 1 (explosive) material must conform to the marking
requirements in Sec. 172.320 of this subchapter.
(5) Hazardous substances. A material meeting the definition of a
hazardous substance as defined in Sec. 171.8, must conform to the
shipping paper requirements in Sec. 172.203(c) of this subchapter and
the marking requirements in Sec. 172.324 of this subchapter:
(i) The proper shipping name must identify the hazardous substance
by name, or the name of the substance must be entered in parentheses in
association with the basic description and marked on the package in
association with the proper shipping name. If the hazardous substance
meets the definition for a hazardous waste, the waste code (for example,
D001), may be used to identify the hazardous substance;
(ii) The shipping paper and the package markings must identify at
least two hazardous substances with the lowest reportable quantities
(RQs) when the material contains two or more hazardous substances; and
(iii) The letters ``RQ'' must be entered on the shipping paper
either before or after the basic description, and marked on the package
in association with the proper shipping name for each hazardous
substance listed.
(6) Hazardous wastes. A material meeting the definition of a
hazardous waste (see Sec. 171.8) must conform to the following:
(i) The shipping paper and the package markings must include the
word ``Waste'' immediately preceding the proper shipping name;
(ii) The shipping paper must be retained by the shipper and by each
carrier for three years after the material is accepted by the initial
carrier (see Sec. 172.205(e)(5)); and
(iii) A hazardous waste manifest must be completed in accordance
with Sec. 172.205 of this subchapter.
(7) Marine pollutants. Except for marine pollutants (see Sec.
171.8) transported in accordance with the IMDG Code, marine pollutants
transported in bulk packages must meet the shipping paper requirements
in Sec. 172.203(l) of this subchapter and the package marking
requirements in Sec. 172.322 of this subchapter.
(8) Organic peroxides. Organic peroxides not identified by technical
name in the Organic Peroxide Table in Sec. 173.225(c) of this
subchapter must be approved by the Associate Administrator in accordance
with Sec. 173.128(d) of this subchapter.
(9) [Reserved]
(10) Poisonous by inhalation materials. A material poisonous by
inhalation (see Sec. 171.8) must conform to the following requirements:
(i) The words ``Poison-Inhalation Hazard'' or ``Toxic-Inhalation
Hazard'' and the words ``Zone A,'' ``Zone B,'' ``Zone C,'' or ``Zone D''
for gases, or ``Zone A'' or ``Zone B'' for liquids, as appropriate, must
be entered on the shipping paper immediately following the basic
shipping description. The word ``Poison'' or ``Toxic'' or the phrase
``Poison-Inhalation Hazard'' or ``Toxic-Inhalation Hazard'' need not be
repeated if it otherwise appears in the shipping description;
(ii) The material must be packaged in accordance with the
requirements of this subchapter;
(iii) The package must be marked in accordance with Sec. 172.313 of
this subchapter; and
(iv) Except as provided in subparagraph (B) of this paragraph
(b)(10)(iv) and for a package containing anhydrous ammonia prepared in
accordance with the Transport Canada TDG Regulations, the package must
be labeled or placarded with POISON INHALATION HAZARD or POISON GAS, as
appropriate, in accordance with Subparts E and F of part 172 of this
subchapter.
(A) For a package transported in accordance with the IMDG Code in a
closed transport vehicle or freight container, a label or placard
conforming to the IMDG Code specifications for a ``Class 2.3'' or
``Class 6.1'' label or
[[Page 144]]
placard may be substituted for the POISON GAS or POISON INHALATION
HAZARD label or placard, as appropriate. The transport vehicle or
freight container must be marked with the identification numbers for the
hazardous material in the manner specified in Sec. 172.313(c) of this
subchapter and placarded as required by subpart F of part 172 of this
subchapter.
(B) For a package transported in accordance with the Transport
Canada TDG Regulations in a closed transport vehicle or freight
container, a label or placard conforming to the TDG Regulations
specifications for a ``Class 2.3'' or ``Class 6.1'' label or placard may
be substituted for the POISON GAS or POISON INHALATION HAZARD label or
placard, as appropriate. The transport vehicle or freight container must
be marked with the identification numbers for the hazardous material in
the manner specified in Sec. 172.313(c) of this subchapter and
placarded as required by subpart F of part 172 of this subchapter. While
in transportation in the United States, the transport vehicle or freight
container may also be placarded in accordance with the appropriate TDG
Regulations in addition to being placarded with the POISON GAS or POISON
INHALATION HAZARD placards.
(11) Class 7 (radioactive) materials. (i) Highway route controlled
quantities (see Sec. 173.403 of this subchapter) must be shipped in
accordance with Sec. Sec. 172.203(d)(4) and (d)(10); 172.507, and
173.22(c) of this subchapter;
(ii) For fissile materials and Type B, Type B(U), and Type B(M)
packagings, the competent authority certification and any necessary
revalidation must be obtained from the appropriate competent authorities
as specified in Sec. Sec. 173.471, 173.472, and 173.473 of this
subchapter, and all requirements of the certificates and revalidations
must be met;
(iii) Type A package contents are limited in accordance with Sec.
173.431 of this subchapter;
(iv) The country of origin for the shipment must have adopted the
edition of SSR-6 of the IAEA Regulations referenced in Sec. 171.7.
(v) The shipment must conform to the requirements of Sec. 173.448,
when applicable;
(vi) The definition for ``radioactive material'' in Sec. 173.403 of
this subchapter must be applied to radioactive materials transported
under the provisions of this subpart;
(vii) Except for limited quantities, the shipment must conform to
the requirements of Sec. 172.204(c)(4) of this subchapter; and
(viii) Excepted packages of radioactive material, instruments or
articles, or articles containing natural uranium or thorium must conform
to the requirements of Sec. 173.421, Sec. 173.424, or Sec. 173.426 of
this subchapter, as appropriate.
(ix) Packages containing fissile materials must conform to the
requirements of Sec. 173.453 to be otherwise excepted from the
requirements of subpart I of part 173 for fissile materials.
(12) Self-reactive materials. Self-reactive materials not identified
by technical name in the Self-reactive Materials Table in Sec.
173.224(b) of this subchapter must be approved by the Associate
Administrator in accordance with Sec. 173.124(a)(2)(iii) of this
subchapter.
[72 FR 25172, May 3, 2007, as amended at 72 FR 55684, Oct. 1, 2007; 73
FR 57004, Oct. 1, 2008; 76 FR 3345, Jan. 19, 2011; 76 FR 56311, Sept.
13, 2011; 78 FR 60751, Oct. 2, 2013; 78 FR 65468, Oct. 31, 2013; 80 FR
1116, Jan. 8, 2015; 80 FR 72920, Nov. 23, 2015; 81 FR 35513, June 2,
2016; 82 FR 15837, Mar. 30, 2017]
Sec. 171.24 Additional requirements for the use of the ICAO
Technical Instructions.
(a) A hazardous material that is offered for transportation or
transported within the United States by aircraft, and by motor vehicle
or rail either before or after being transported by aircraft in
accordance with the ICAO Technical Instructions (IBR, see Sec. 171.7),
as authorized in paragraph (a) of Sec. 171.22, must conform to the
requirements in Sec. 171.22, as applicable, and this section.
(b) Any person who offers for transportation or transports a
hazardous material in accordance with the ICAO Technical Instructions
must comply with the following additional conditions and requirements:
[[Page 145]]
(1) All applicable requirements in parts 171 and 175 of this
subchapter (also see 14 CFR 121.135, 121.401, 121.433a, 135.323, 135.327
and 135.333);
(2) The quantity limits prescribed in the ICAO Technical
Instructions for transportation by passenger-carrying or cargo aircraft,
as applicable;
(3) The conditions or requirements of a United States variation,
when specified in the ICAO Technical Instructions.
(c) Highway transportation. For transportation by highway prior to
or after transportation by aircraft, a shipment must conform to the
applicable requirements of part 177 of this subchapter, and the motor
vehicle must be placarded in accordance with subpart F of part 172 of
this subchapter.
(d) Conditions and requirements specific to certain materials.
Hazardous materials offered for transportation or transported in
accordance with the ICAO Technical Instructions must conform to the
following specific conditions and requirements, as applicable:
(1) Batteries--(i) Nonspillable wet electric storage batteries.
Nonspillable wet electric storage batteries are not subject to the
requirements of this subchapter provided--
(A) The battery meets the conditions specified in Special Provision
67 of the ICAO Technical Instructions;
(B) The battery, its outer packaging, and any overpack are plainly
and durably marked ``NONSPILLABLE'' or ``NONSPILLABLE BATTERY''; and
(C) The batteries or battery assemblies are offered for
transportation or transported in a manner that prevents short circuiting
or forced discharge, including, but not limited to, protection of
exposed terminals.
(ii) Lithium metal cells and batteries. Lithium metal cells and
batteries (UN3090) are forbidden for transport aboard passenger-carrying
aircraft. The outside of each package that contains lithium metal cells
or lithium metal batteries (UN3090) transported in accordance with
Packing Instruction 968, Section II must be marked ``PRIMARY LITHIUM
BATTERIES--FORBIDDEN FOR TRANSPORT ABOARD PASSENGER AIRCRAFT'' or
``LITHIUM METAL BATTERIES--FORBIDDEN FOR TRANSPORT ABOARD PASSENGER
AIRCRAFT'', or labeled with a CARGO AIRCRAFT ONLY label specified in
Sec. 172.448 of this subchapter.
(iii) Low production runs or prototypes lithium cells or batteries.
Production runs consisting of not more than 100 lithium cells or
batteries per year, or prototype lithium cells or batteries (including
cells or batteries packed with, or contained in, equipment or motor
vehicles) not of a type proven to meet the requirements of section 38.3
of the UN Manual of Tests and Criteria (IBR, see Sec. 171.7 of this
subchapter), must be approved by the Associate Administrator prior to
transportation aboard aircraft.
(2) A package containing Oxygen, compressed, or any of the following
oxidizing gases must be packaged as required by parts 173 and 178 of
this subchapter: carbon dioxide and oxygen mixtures, compressed;
compressed gas, oxidizing, n.o.s.; liquefied gas, oxidizing, n.o.s.;
nitrogen trifluoride; and nitrous oxide.
[72 FR 25172, May 3, 2007, as amended at 72 FR 44847, Aug. 9, 2007; 72
FR 55097, Sept. 28, 2007; 79 FR 46034, Aug. 6, 2014; 80 FR 1116, Jan. 8,
2015; 80 FR 72920, Nov. 23, 2015]
Sec. 171.25 Additional requirements for the use of the IMDG Code.
(a) A hazardous material may be offered for transportation or
transported to, from or within the United States by vessel, and by motor
carrier and rail in accordance with the IMDG Code (IBR, see Sec.
171.7), as authorized in Sec. 171.22, provided all or part of the
movement is by vessel. Such shipments must conform to the requirements
in Sec. 171.22, as applicable, and this section.
(b) Any person who offers for transportation or transports a
hazardous material in accordance with the IMDG Code must conform to the
following additional conditions and requirements:
(1) Unless specified otherwise in this subchapter, a shipment must
conform to the requirements in part 176 of this subchapter. For
transportation by rail or highway prior to or subsequent to
transportation by vessel, a shipment must conform to the applicable
requirements of parts 174 and 177 respectively, of this subchapter, and
the motor vehicle or rail car must be placarded in accordance with
subpart F of
[[Page 146]]
part 172 of this subchapter. When a hazardous material regulated by this
subchapter for transportation by highway is transported by motor vehicle
on a public highway or by rail under the provisions of subpart C of part
171, the segregation requirements of Part 7, Chapter 7.2 of the IMDG
Code are authorized.
(2) For transportation by vessel, the stowage and segregation
requirements in Part 7 of the IMDG Code may be substituted for the
stowage and segregation requirements in part 176 of this subchapter.
(3) The outside of each package containing lithium metal cells or
batteries (UN3090) transported in accordance with special provision 188
of the IMDG Code must be marked ``PRIMARY LITHIUM BATTERIES--FORBIDDEN
FOR TRANSPORT ABOARD PASSENGER AIRCRAFT'' or ``LITHIUM METAL BATTERIES--
FORBIDDEN FOR TRANSPORT ABOARD PASSENGER AIRCRAFT'', or labeled with a
CARGO AIRCRAFT ONLY label specified in Sec. 172.448 of this subchapter.
The provisions of this paragraph do not apply to packages that contain 5
kg (11 pounds) net weight or less of lithium metal cells or batteries
that are packed with, or contained in, equipment.
(4) Material consigned under UN3166 and UN3171 (e.g., Engines,
internal combustion, etc., Vehicles, etc. and Battery-powered equipment)
may be prepared in accordance with the IMDG Code or this subchapter.
(c) Conditions and requirements for bulk packagings. Except for IBCs
and UN portable tanks used for the transportation of liquids or solids,
bulk packagings must conform to the requirements of this subchapter.
Additionally, the following requirements apply:
(1) UN portable tanks must conform to the requirements in Special
Provisions TP37, TP38, TP44 and TP45 when applicable, and any applicable
bulk special provisions assigned to the hazardous material in the
Hazardous Materials Table in Sec. 172.101 of this subchapter;
(2) IMO Type 5 portable tanks must conform to DOT Specification 51
or UN portable tank requirements, unless specifically authorized in this
subchapter or approved by the Associate Administrator;
(3) Except as specified in this subpart, for a material poisonous
(toxic) by inhalation, the T Codes specified in Column 13 of the
Dangerous Goods List in the IMDG Code may be applied to the
transportation of those materials in IM, IMO and DOT Specification 51
portable tanks, when these portable tanks are authorized in accordance
with the requirements of this subchapter; and
(4) No person may offer an IM or UN portable tank containing liquid
hazardous materials of Class 3, PG I or II, or PG III with a flash point
less than 100 [deg]F (38 [deg]C); Division 5.1, PG I or II; or Division
6.1, PG I or II, for unloading while it remains on a transport vehicle
with the motive power unit attached, unless it conforms to the
requirements in Sec. 177.834(o) of this subchapter.
(d) Use of IMDG Code in port areas. (1) Except for Division 1.1,
1.2, and Class 7 materials, a hazardous material being imported into or
exported from the United States or passing through the United States in
the course of being shipped between locations outside the United States
may be offered and accepted for transportation and transported by motor
vehicle within a single port area, including contiguous harbors, when
packaged, marked, classed, labeled, stowed and segregated in accordance
with the IMDG Code, offered and accepted in accordance with the
requirements of subparts C and F of part 172 of this subchapter
pertaining to shipping papers and placarding, and otherwise conforms to
the applicable requirements of part 176 of this subchapter.
(2) The requirement in Sec. 172.201(d) of this subchapter for an
emergency telephone number does not apply to shipments made in
accordance with the IMDG Code if the hazardous material is not offloaded
from the vessel, or is offloaded between ocean vessels at a U.S. port
facility without being transported by public highway.
[72 FR 25172, May 3, 2007, as amended at 72 FR 44847, Aug. 9, 2007; 73
FR 57004, Oct. 1, 2008; 74 FR 2233, Jan. 14, 2009; 76 FR 3345, Jan. 19,
2011; 79 FR 46034, Aug. 6, 2014; 80 FR 1116, Jan. 8, 2015]
[[Page 147]]
Sec. 171.26 Additional requirements for the use of the IAEA Regulations.
A Class 7 (radioactive) material being imported into or exported
from the United States or passing through the United States in the
course of being shipped between places outside the United States may be
offered for transportation or transported in accordance with the IAEA
Regulations (IBR, see Sec. 171.7) as authorized in paragraph (a) of
Sec. 171.22, provided the requirements in Sec. 171.22, as applicable,
are met.
PART 172_HAZARDOUS MATERIALS TABLE, SPECIAL PROVISIONS,
HAZARDOUS MATERIALS COMMUNICATIONS, EMERGENCY RESPONSE INFORMATION,
TRAINING REQUIREMENTS, AND SECURITY
PLANS--Table of Contents
Subpart A_General
Sec.
172.1 Purpose and scope.
172.3 Applicability.
Subpart B_Table of Hazardous Materials and Special Provisions
172.101 Purpose and use of hazardous materials table.
172.102 Special provisions.
Subpart C_Shipping Papers
172.200 Applicability.
172.201 Preparation and retention of shipping papers.
172.202 Description of hazardous material on shipping papers.
172.203 Additional description requirements.
172.204 Shipper's certification.
172.205 Hazardous waste manifest.
Subpart D_Marking
172.300 Applicability.
172.301 General marking requirements for non-bulk packagings.
172.302 General marking requirements for bulk packagings.
172.303 Prohibited marking.
172.304 Marking requirements.
172.306 [Reserved]
172.308 Authorized abbreviations.
172.310 Class 7 (radioactive) materials.
172.312 Liquid hazardous materials in non-bulk packagings.
172.313 Poisonous hazardous materials.
172.315 Limited quantities.
172.316 Packagings containing materials classed as ORM-D.
172.317 KEEP AWAY FROM HEAT handling mark.
172.320 Explosive hazardous materials.
172.322 Marine pollutants.
172.323 Infectious substances.
172.324 Hazardous substances in non-bulk packagings.
172.325 Elevated temperature materials.
172.326 Portable tanks.
172.327 Petroleum sour crude oil in bulk packaging.
172.328 Cargo tanks.
172.330 Tank cars and multi-unit tank car tanks.
172.331 Bulk packagings other than portable tanks, cargo tanks, tank
cars and multi-unit tank car tanks.
172.332 Identification number markings.
172.334 Identification numbers; prohibited display.
172.336 Identification numbers; special provisions.
172.338 Replacement of identification numbers.
Subpart E_Labeling
172.400 General labeling requirements.
172.400a Exceptions from labeling.
172.401 Prohibited labeling.
172.402 Additional labeling requirements.
172.403 Class 7 (radioactive) material.
172.404 Labels for mixed and consolidated packaging.
172.405 Authorized label modifications.
172.406 Placement of labels.
172.407 Label specifications.
172.411 EXPLOSIVE 1.1, 1.2, 1.3, 1.4, 1.5 and 1.6 labels, and EXPLOSIVE
Subsidiary label.
172.415 NON-FLAMMABLE GAS label.
172.416 POISON GAS label.
172.417 FLAMMABLE GAS label.
172.419 FLAMMABLE LIQUID label.
172.420 FLAMMABLE SOLID label.
172.422 SPONTANEOUSLY COMBUSTIBLE label.
172.423 DANGEROUS WHEN WET label.
172.426 OXIDIZER label.
172.427 ORGANIC PEROXIDE label.
172.429 POISON INHALATION HAZARD label.
172.430 POISON label.
172.431 [Reserved]
172.432 INFECTIOUS SUBSTANCE label.
172.436 RADIOACTIVE WHITE-I label.
172.438 RADIOACTIVE YELLOW-II label.
172.440 RADIOACTIVE YELLOW-III label.
172.441 FISSILE label.
172.442 CORROSIVE label.
172.444 [Reserved]
172.446 CLASS 9 label.
172.447 LITHIUM BATTERY label.
172.448 CARGO AIRCRAFT ONLY label.
172.450 EMPTY label.
[[Page 148]]
Subpart F_Placarding
172.500 Applicability of placarding requirements.
172.502 Prohibited and permissive placarding.
172.503 Identification number display on placards.
172.504 General placarding requirements.
172.505 Placarding for subsidiary hazards.
172.506 Providing and affixing placards: Highway.
172.507 Special placarding provisions: Highway.
172.508 Placarding and affixing placarding: Rail.
172.510 Special placarding provisions: Rail.
172.512 Freight containers and aircraft unit load devices.
172.514 Bulk packagings.
172.516 Visibility and display of placards.
172.519 General specifications for placards.
172.521 DANGEROUS placard.
172.522 EXPLOSIVES 1.1, EXPLOSIVES 1.2 and EXPLOSIVES 1.3 placards.
172.523 EXPLOSIVES 1.4 placard.
172.524 EXPLOSIVES 1.5 placard.
172.525 EXPLOSIVES 1.6 placard.
172.526 [Reserved]
172.527 Background requirements for certain placards.
172.528 NON-FLAMMABLE GAS placard.
172.530 OXYGEN placard.
172.532 FLAMMABLE GAS placard.
172.536 [Reserved]
172.540 POISON GAS placard.
172.542 FLAMMABLE placard.
172.544 COMBUSTIBLE placard.
172.546 FLAMMABLE SOLID placard.
172.547 SPONTANEOUSLY COMBUSTIBLE placard.
172.548 DANGEROUS WHEN WET placard.
172.550 OXIDIZER placard.
172.552 ORGANIC PEROXIDE placard.
172.553 [Reserved]
172.554 POISON placard.
172.555 POISON INHALATION HAZARD placard.
172.556 RADIOACTIVE placard.
172.558 CORROSIVE placard.
172.560 CLASS 9 placard.
Subpart G_Emergency Response Information
172.600 Applicability and general requirements.
172.602 Emergency response information.
172.604 Emergency response telephone number.
172.606 Carrier information contact.
Subpart H_Training
172.700 Purpose and scope.
172.701 Federal-State relationship.
172.702 Applicability and responsibility for training and testing.
172.704 Training requirements.
Subpart I_Safety and Security Plans
172.800 Purpose and applicability.
172.802 Components of a security plan.
172.804 Relationship to other Federal requirements.
172.820 Additional planning requirements for transportation by rail.
172.822 Limitation on actions by states, local governments, and Indian
tribes.
Appendix A to Part 172--Office of Hazardous Materials Transportation
Color Tolerance Charts and Tables
Appendix B to Part 172--Trefoil Symbol
Appendix C to Part 172--Dimensional Specifications for Recommended
Placard Holder
Appendix D to Part 172--Rail Risk Analysis Factors
Authority: 49 U.S.C. 5101-5128, 44701; 49 CFR 1.81, 1.96 and 1.97.
Source: Amdt. 172-29, 41 FR 15996, Apr. 15, 1976, unless otherwise
noted.
Subpart A_General
Sec. 172.1 Purpose and scope.
This part lists and classifies those materials which the Department
has designated as hazardous materials for purposes of transportation and
prescribes the requirements for shipping papers, package marking,
labeling, and transport vehicle placarding applicable to the shipment
and transportation of those hazardous materials.
[Amdt. 172-29, 41 FR 15997, Apr. 15, 1976, as amended by 66 FR 45379,
Aug. 28, 2001]
Sec. 172.3 Applicability.
(a) This part applies to--
(1) Each person who offers a hazardous material for transportation,
and
(2) Each carrier by air, highway, rail, or water who transports a
hazardous material.
(b) When a person, other than one of those provided for in paragraph
(a) of this section, performs a packaging labeling or marking function
required by this part, that person shall perform the function in
accordance with this part.
[Amdt. 172-29, 41 FR 15996, Apr. 15, 1976, as amended by Amdt. 172-32,
41 FR 38179, Sept. 9, 1976]
[[Page 149]]
Subpart B_Table of Hazardous Materials and Special Provisions
Sec. 172.101 Purpose and use of hazardous materials table.
(a) The Hazardous Materials Table (Table) in this section designates
the materials listed therein as hazardous materials for the purpose of
transportation of those materials. For each listed material, the Table
identifies the hazard class or specifies that the material is forbidden
in transportation, and gives the proper shipping name or directs the
user to the preferred proper shipping name. In addition, the Table
specifies or references requirements in this subchapter pertaining to
labeling, packaging, quantity limits aboard aircraft and stowage of
hazardous materials aboard vessels.
(b) Column 1: Symbols. Column 1 of the Table contains six symbols
(`` + '', ``A'', ``D'', ``G'', ``I'' and ``W'') as follows:
(1) The plus (+) sign fixes the proper shipping name, hazard class
and packing group for that entry without regard to whether the material
meets the definition of that class, packing group or any other hazard
class definition. When the plus sign is assigned to a proper shipping
name in Column (1) of the Sec. 172.101 Table, it means that the
material is known to pose a risk to humans. When a plus sign is assigned
to mixtures or solutions containing a material where the hazard to
humans is significantly different from that of the pure material or
where no hazard to humans is posed, the material may be described using
an alternative shipping name that represents the hazards posed by the
material. An appropriate alternate proper shipping name and hazard class
may be authorized by the Associate Administrator.
(2) The letter ``A'' denotes a material that is subject to the
requirements of this subchapter only when offered or intended for
transportation by aircraft, unless the material is a hazardous substance
or a hazardous waste. A shipping description entry preceded by an ``A''
may be used to describe a material for other modes of transportation
provided all applicable requirements for the entry are met.
(3) The letter ``D'' identifies proper shipping names which are
appropriate for describing materials for domestic transportation but may
be inappropriate for international transportation under the provisions
of international regulations (e.g., IMO, ICAO). An alternate proper
shipping name may be selected when either domestic or international
transportation is involved.
(4) The letter ``G'' identifies proper shipping names for which one
or more technical names of the hazardous material must be entered in
parentheses, in association with the basic description. (See Sec.
172.203(k).)
(5) The letter ``I'' identifies proper shipping names which are
appropriate for describing materials in international transportation. An
alternate proper shipping name may be selected when only domestic
transportation is involved.
(6) The letter ``W'' denotes a material that is subject to the
requirements of this subchapter only when offered or intended for
transportation by vessel, unless the material is a hazardous substance
or a hazardous waste. A shipping description entry preceded by a ``W''
may be used to describe a material for other modes of transportation
provided all applicable requirements for the entry are met.
(c) Column 2: Hazardous materials descriptions and proper shipping
names. Column 2 lists the hazardous materials descriptions and proper
shipping names of materials designated as hazardous materials.
Modification of a proper shipping name may otherwise be required or
authorized by this section. Proper shipping names are limited to those
shown in Roman type (not italics).
(1) Proper shipping names may be used in the singular or plural and
in either capital or lower case letters. Words may be alternatively
spelled in the same manner as they appear in the ICAO Technical
Instructions or the IMDG Code. For example ``aluminum'' may be spelled
``aluminium'' and ``sulfur'' may be spelled ``sulphur''. However, the
word ``inflammable'' may not be used in place of the word ``flammable''.
(2) Punctuation marks and words in italics are not part of the
proper shipping name, but may be used in addition to the proper shipping
name. The word
[[Page 150]]
``or'' in italics indicates that there is a choice of terms in the
sequence that may alternately be used as the proper shipping name or as
part of the proper shipping name, as appropriate. For example, for the
hazardous materials description ``Carbon dioxide, solid or Dry ice''
either ``Carbon dioxide, solid'' or ``Dry ice'' may be used as the
proper shipping name; and for the hazardous materials description
``Articles, pressurized pneumatic or hydraulic,'' either ``Articles,
pressurized pneumatic'' or ``Articles, pressurized hydraulic'' may be
used as the proper shipping name.
(3) The word ``poison'' or ``poisonous'' may be used interchangeably
with the word ``toxic'' when only domestic transportation is involved.
The abbreviation ``n.o.i.'' or ``n.o.i.b.n.'' may be used
interchangeably with ``n.o.s.''.
(4) Except for hazardous wastes, when qualifying words are used as
part of the proper shipping name, their sequence in the package markings
and shipping paper description is optional. However, the entry in the
Table reflects the preferred sequence.
(5) When one entry references another entry by use of the word
``see'', if both names are in Roman type, either name may be used as the
proper shipping name (e.g., Ethyl alcohol, see Ethanol).
(6) When a proper shipping name includes a concentration range as
part of the shipping description, the actual concentration, if it is
within the range stated, may be used in place of the concentration
range. For example, an aqueous solution of hydrogen peroxide containing
30 percent peroxide may be described as ``Hydrogen peroxide, aqueous
solution with not less than 20 percent but not more than 40 percent
hydrogen peroxide'' or ``Hydrogen peroxide, aqueous solution with 30
percent hydrogen peroxide.'' Also, the percent sign (%) may be used in
place of the word ``percent'' when words in italics containing the word
``percent'' are used in addition to the proper shipping name.
(7) Use of the prefix ``mono'' is optional in any shipping name,
when appropriate. Thus, Iodine monochloride may be used interchangeably
with Iodine chloride. In ``Glycerol alpha-monochlorohydrin'' the term
``mono'' is considered a prefix to the term ``chlorohydrin'' and may be
deleted.
(8) Use of the word ``liquid'' or ``solid''. The word ``liquid'' or
``solid'' may be added to a proper shipping name when a hazardous
material specifically listed by name may, due to differing physical
states, be a liquid or solid. When the packaging specified in Column 8
is inappropriate for the physical state of the material, the table
provided in paragraph (i)(4) of this section should be used to determine
the appropriate packaging section.
(9) Hazardous wastes. If the word ``waste'' is not included in the
hazardous material description in Column 2 of the Table, the proper
shipping name for a hazardous waste (as defined in Sec. 171.8 of this
subchapter), shall include the word ``Waste'' preceding the proper
shipping name of the material. For example: Waste acetone.
(10) Mixtures and solutions. (i) A mixture or solution meeting the
definition of one or more hazard class that is not identified
specifically by name, comprised of a single predominant hazardous
material identified in the Table by technical name and one or more
hazardous and/or non-hazardous material, must be described using the
proper shipping name of the hazardous material and the qualifying word
``mixture'' or ``solution'', as appropriate, unless--
(A) Except as provided in Sec. 172.101(i)(4) the packaging
specified in Column 8 is inappropriate to the physical state of the
material;
(B) The shipping description indicates that the proper shipping name
applies only to the pure or technically pure hazardous material;
(C) The hazard class, packing group, or subsidiary hazard of the
mixture or solution is different from that specified for the entry;
(D) There is a significant change in the measures to be taken in
emergencies;
(E) The material is identified by special provision in Column 7 of
the Sec. 172.101 Table as a material poisonous by inhalation; however,
it no longer meets the definition of poisonous by inhalation or it falls
within a different hazard zone than that specified in the special
provision; or
[[Page 151]]
(F) The material can be appropriately described by a shipping name
that describes its intended application, such as ``Coating solution'',
``Extracts, flavoring'' or ``Compound, cleaning liquid.''.
(ii) If one or more of the conditions in paragraphs (c)(10)(i)(A)
through (F) of this section is satisfied then the proper shipping name
selection process in (c)(12)(ii) must be used.
(iii) A mixture or solution meeting the definition of one or more
hazard class that is not identified in the Table specifically by name,
comprised of two or more hazardous materials in the same hazard class,
must be described using an appropriate shipping description (e.g.,
``Flammable liquid, n.o.s.''). The name that most appropriately
describes the material shall be used; e.g., an alcohol not listed by its
technical name in the Table shall be described as ``Alcohol, n.o.s.''
rather than ``Flammable liquid, n.o.s.''. Some mixtures may be more
appropriately described according to their application, such as
``Coating solution'' or ``Extracts, flavoring liquid'' rather than by an
n.o.s. entry. Under the provisions of subparts C and D of this part, the
technical names of at least two components most predominately
contributing to the hazards of the mixture or solution may be required
in association with the proper shipping name.
(11) Except for a material subject to or prohibited by Sec. 173.21,
Sec. 173.54, Sec. 173.56(d), Sec. 173.56(e), Sec. 173.224(c) or
Sec. 173.225(b) of this subchapter, a material that is considered to be
a hazardous waste or a sample of a material for which the hazard class
is uncertain and must be determined by testing may be assigned a
tentative proper shipping name, hazard class, identification number and
packing group, if applicable, based on the shipper's tentative
determination according to:
(i) Defining criteria in this subchapter;
(ii) The hazard precedence prescribed in Sec. 173.2a of this
subchapter;
(iii) The shipper's knowledge of the material;
(iv) In addition to paragraphs (c)(11)(i) through (iii) of this
section, for a sample of a material other than a waste, the following
must be met:
(A) Except when the word ``Sample'' already appears in the proper
shipping name, the word ``Sample'' must appear as part of the proper
shipping name or in association with the basic description on the
shipping paper.
(B) When the proper shipping description for a sample is assigned a
``G'' in Column (1) of the Sec. 172.101 Table, and the primary
constituent(s) for which the tentative classification is based are not
known, the provisions requiring a technical name for the constituent(s)
do not apply; and
(C) A sample must be transported in a combination packaging that
conforms to the requirements of this subchapter that are applicable to
the tentative packing group assigned, and may not exceed a net mass of
2.5 kg (5.5 pounds) per package.
Note to paragraph (c)(11): For the transportation of samples of
self-reactive materials, organic peroxides, explosives or lighters, see
Sec. 173.224(c)(3), Sec. 173.225(c)(2), Sec. 173.56(d) or Sec.
173.308(b)(2) of this subchapter, respectively.
(12) Except when the proper shipping name in the Table is preceded
by a plus (+)--
(i) If it is specifically determined that a material meets the
definition of a hazard class, packing group or hazard zone, other than
the class, packing group or hazard zone shown in association with the
proper shipping name, or does not meet the defining criteria for a
subsidiary hazard shown in Column 6 of the Table, the material shall be
described by an appropriate proper shipping name listed in association
with the correct hazard class, packing group, hazard zone, or subsidiary
hazard for the material.
(ii) Generic or n.o.s. descriptions. If an appropriate technical
name is not shown in the Table, selection of a proper shipping name
shall be made from the generic or n.o.s. descriptions corresponding to
the specific hazard class, packing group, hazard zone, or subsidiary
hazard, if any, for the material. The name that most appropriately
describes the material shall be used; e.g., an alcohol not listed by its
technical name in the Table shall be described as ``Alcohol, n.o.s.''
rather than ``Flammable liquid, n.o.s.''. Some mixtures may be more
appropriately described
[[Page 152]]
according to their application, such as ``Coating solution'' or
``Extracts, flavoring, liquid'', rather than by an n.o.s. entry, such as
``Flammable liquid, n.o.s.'' It should be noted, however, that an n.o.s.
description as a proper shipping name may not provide sufficient
information for shipping papers and package markings. Under the
provisions of subparts C and D of this part, the technical name of one
or more constituents which makes the product a hazardous material may be
required in association with the proper shipping name.
(iii) Multiple hazard materials. If a material meets the definition
of more than one hazard class, and is not identified in the Table
specifically by name (e.g., acetyl chloride), the hazard class of the
material shall be determined by using the precedence specified in Sec.
173.2a of this subchapter, and an appropriate shipping description
(e.g., ``Flammable liquid, corrosive n.o.s.'') shall be selected as
described in paragraph (c)(12)(ii) of this section.
(iv) If it is specifically determined that a material is not a
forbidden material and does not meet the definition of any hazard class,
the material is not a hazardous material.
(13) Self-reactive materials and organic peroxides. A generic proper
shipping name for a self-reactive material or an organic peroxide, as
listed in Column 2 of the Table, must be selected based on the
material's technical name and concentration, in accordance with the
provisions of Sec. 173.224 or Sec. 173.225 of this subchapter,
respectively.
(14) A proper shipping name that describes all isomers of a material
may be used to identify any isomer of that material if the isomer meets
criteria for the same hazard class or division, subsidiary risk(s) and
packing group, unless the isomer is specifically identified in the
Table.
(15) Unless a hydrate is specifically listed in the Table, a proper
shipping name for the equivalent anhydrous substance may be used, if the
hydrate meets the same hazard class or division, subsidiary risk(s) and
packing group.
(16) Unless it is already included in the proper shipping name in
the Sec. 172.101 Table, the qualifying words ``liquid'' or ``solid''
may be added in association with the proper shipping name when a
hazardous material specifically listed by name in the Sec. 172.101
Table may, due to the differing physical states of the various isomers
of the material, be either a liquid or a solid (for example
``Dinitrotoluenes, liquid'' and ``Dinitrotoluenes, solid''). Use of the
words ``liquid'' or ``solid'' is subject to the limitations specified
for the use of the words ``mixture'' or ``solution'' in paragraph
(c)(10) of this section. The qualifying word ``molten'' may be added in
association with the proper shipping name when a hazardous material,
which is a solid in accordance with the definition in Sec. 171.8 of
this subchapter, is offered for transportation in the molten state (for
example, ``Alkylphenols, solid, n.o.s., molten'').
(d) Column 3: Hazard class or Division. Column 3 contains a
designation of the hazard class or division corresponding to each proper
shipping name, or the word ``Forbidden''.
(1) A material for which the entry in this column is ``Forbidden''
may not be offered for transportation or transported. This prohibition
does not apply if the material is diluted, stabilized or incorporated in
a device and it is classed in accordance with the definitions of
hazardous materials contained in part 173 of this subchapter.
(2) When a reevaluation of test data or new data indicates a need to
modify the ``Forbidden'' designation or the hazard class or packing
group specified for a material specifically identified in the Table,
this data should be submitted to the Associate Administrator.
(3) A basic description of each hazard class and the section
reference for class definitions appear in Sec. 173.2 of this
subchapter.
(4) Each reference to a Class 3 material is modified to read
``Combustible liquid'' when that material is reclassified in accordance
with Sec. 173.150(e) or (f) of this subchapter or has a flash point
above 60 [deg]C (140 [deg]F) but below 93 [deg]C (200 [deg]F).
(e) Column 4: Identification number. Column 4 lists the
identification number assigned to each proper shipping name. Those
preceded by the letters ``UN'' are associated with proper shipping names
considered appropriate for
[[Page 153]]
international transportation as well as domestic transportation. Those
preceded by the letters ``NA'' are associated with proper shipping names
not recognized for international transportation, except to and from
Canada. Identification numbers in the ``NA9000'' series are associated
with proper shipping names not appropriately covered by international
hazardous materials (dangerous goods) transportation standards, or not
appropriately addressed by international transportation standards for
emergency response information purposes, except for transportation
between the United States and Canada. Those preceded by the letters
``ID'' are associated with proper shipping names recognized by the ICAO
Technical Instructions (IBR, see Sec. 171.7 of this subchapter).
(f) Column 5: Packing group. Column 5 specifies one or more packing
groups assigned to a material corresponding to the proper shipping name
and hazard class for that material. Class 2, Class 7, Division 6.2
(other than regulated medical wastes), and ORM-D materials, do not have
packing groups. Articles in other than Class 1 are not assigned to
packing groups. For packing purposes, any requirement for a specific
packaging performance level is set out in the applicable packing
authorizations of part 173. Packing Groups I, II and III indicate the
degree of danger presented by the material is great, medium or minor,
respectively. If more than one packing group is indicated for an entry,
the packing group for the hazardous material is determined using the
criteria for assignment of packing groups specified in subpart D of part
173. When a reevaluation of test data or new data indicates a need to
modify the specified packing group(s), the data should be submitted to
the Associate Administrator. Each reference in this column to a material
which is a hazardous waste or a hazardous substance, and whose proper
shipping name is preceded in Column 1 of the Table by the letter ``A''
or ``W'', is modified to read ``III'' on those occasions when the
material is offered for transportation or transported by a mode in which
its transportation is not otherwise subject to requirements of this
subchapter.
(g) Column 6: Labels. Column 6 specifies codes which represent the
hazard warning labels required for a package filled with a material
conforming to the associated hazard class and proper shipping name,
unless the package is otherwise excepted from labeling by a provision in
subpart E of this part, or part 173 of this subchapter. The first code
is indicative of the primary hazard of the material. Additional label
codes are indicative of subsidiary hazards. Provisions in Sec. 172.402
may require that a label other than that specified in Column 6 be
affixed to the package in addition to that specified in Column 6. No
label is required for a material classed as a combustible liquid or for
a Class 3 material that is reclassed as a combustible liquid. For
``Empty'' label requirements, see Sec. 173.428 of this subchapter. The
codes contained in Column 6 are defined according to the following
table:
Label Substitution Table
------------------------------------------------------------------------
Label code Label name
------------------------------------------------------------------------
1......................................... Explosive
1.1 \1\................................... Explosive 1.1\1\
1.2 \1\................................... Explosive 1.2\1\
1.3 \1\................................... Explosive 1.3\1\
1.4 \1\................................... Explosive 1.4\1\
1.5 \1\................................... Explosive 1.5\1\
1.6 \1\................................... Explosive 1.6\1\
2.1....................................... Flammable Gas
2.2....................................... Non-Flammable Gas
2.3....................................... Poison Gas
3......................................... Flammable Liquid
4.1....................................... Flammable Solid
4.2....................................... Spontaneously Combustible
4.3....................................... Dangerous When Wet
5.1....................................... Oxidizer
5.2....................................... Organic Peroxide
6.1 (inhalation hazard, Zone A or B)...... Poison Inhalation Hazard
6.1 (other than inhalation hazard, Zone A Poison
or B) \2\.
6.2....................................... Infectious substance
7......................................... Radioactive
8......................................... Corrosive
9......................................... Class 9
------------------------------------------------------------------------
\1\ Refers to the appropriate compatibility group letter.
\2\ The packing group for a material is indicated in column 5 of the
table.
(h) Column 7: Special provisions. Column 7 specifies codes for
special provisions applicable to hazardous materials. When Column 7
refers to a special provision for a hazardous material, the meaning and
requirements of that special provision are as set forth in Sec. 172.102
of this subpart.
[[Page 154]]
(i) Column 8: Packaging authorizations. Columns 8A, 8B and 8C
specify the applicable sections for exceptions, non-bulk packaging
requirements and bulk packaging requirements, respectively, in part 173
of this subchapter. Columns 8A, 8B and 8C are completed in a manner
which indicates that ``Sec. 173.'' precedes the designated numerical
entry. For example, the entry ``202'' in Column 8B associated with the
proper shipping name ``Gasoline'' indicates that for this material
conformance to non-bulk packaging requirements prescribed in Sec.
173.202 of this subchapter is required. When packaging requirements are
specified, they are in addition to the standard requirements for all
packagings prescribed in Sec. 173.24 of this subchapter and any other
applicable requirements in subparts A and B of part 173 of this
subchapter.
(1) Exceptions. Column 8A contains exceptions from some of the
requirements of this subchapter. The referenced exceptions are in
addition to those specified in subpart A of part 173 and elsewhere in
this subchapter. A ``None'' in this column means no packaging exceptions
are authorized, except as may be provided by special provisions in
Column 7.
(2) Non-bulk packaging. Column 8B references the section in part 173
of this subchapter which prescribes packaging requirements for non-bulk
packagings. A ``None'' in this column means non-bulk packagings are not
authorized, except as may be provided by special provisions in Column 7.
Each reference in this column to a material which is a hazardous waste
or a hazardous substance, and whose proper shipping name is preceded in
Column 1 of the Table by the letter ``A'' or ``W'', is modified to
include ``Sec. 173.203'' or ``Sec. 173.213'', as appropriate for
liquids and solids, respectively, on those occasions when the material
is offered for transportation or transported by a mode in which its
transportation is not otherwise subject to the requirements of this
subchapter.
(3) Bulk packaging. Column (8C) specifies the section in part 173 of
this subchapter that prescribes packaging requirements for bulk
packagings, subject to the limitations, requirements, and additional
authorizations of Columns (7) and (8B). A ``None'' in Column (8C) means
bulk packagings are not authorized, except as may be provided by special
provisions in Column (7) and in packaging authorizations Column (8B).
Additional authorizations and limitations for use of UN portable tanks
are set forth in Column 7. For each reference in this column to a
material that is a hazardous waste or a hazardous substance, and whose
proper shipping name is preceded in Column 1 of the Table by the letter
``A'' or ``W'' and that is offered for transportation or transported by
a mode in which its transportation is not otherwise subject to the
requirements of this subchapter:
(4) For a hazardous material which is specifically named in the
Table and whose packaging sections specify packagings not applicable to
the form of the material (e.g., packaging specified is for solid
material and the material is being offered for transportation in a
liquid form) the following table should be used to determine the
appropriate packaging section:
------------------------------------------------------------------------
Corresponding packaging
Packaging section reference for solid materials section for liquid
materials
------------------------------------------------------------------------
Sec. 173.187................................. Sec. 173.181
Sec. 173.211................................. Sec. 173.201
Sec. 173.212................................. Sec. 173.202
Sec. 173.213................................. Sec. 173.203
Sec. 173.240................................. Sec. 173.241
Sec. 173.242................................. Sec. 173.243
------------------------------------------------------------------------
(5) Cylinders. For cylinders, both non-bulk and bulk packaging
authorizations are set forth in Column (8B). Notwithstanding a
designation of ``None'' in Column (8C), a bulk cylinder may be used when
specified through the section reference in Column (8B).
(j) Column 9: Quantity limitations. Columns 9A and 9B specify the
maximum quantities that may be offered for transportation in one package
by passenger-carrying aircraft or passenger-carrying rail car (Column
9A) or by cargo aircraft only (Column 9B), subject to the following:
(1) ``Forbidden'' means the material may not be offered for
transportation or transported in the applicable mode of transport.
(2) The quantity limitation is ``net'' except where otherwise
specified, such as for ``Consumer commodity'' which specifies ``30 kg
gross.''
[[Page 155]]
(3) When articles or devices are specifically listed by name, the
net quantity limitation applies to the entire article or device (less
packaging and packaging materials) rather than only to its hazardous
components.
(4) A package offered or intended for transportation by aircraft and
which is filled with a material forbidden on passenger-carrying aircraft
but permitted on cargo aircraft only, or which exceeds the maximum net
quantity authorized on passenger-carrying aircraft, shall be labelled
with the CARGO AIRCRAFT ONLY label specified in Sec. 172.448 of this
part.
(5) The total net quantity of hazardous material for an outer non-
bulk packaging that contains more than one hazardous material may not
exceed the lowest permitted maximum net quantity per package as shown in
Column 9A or 9B, as appropriate. If one material is a liquid and one is
a solid, the maximum net quantity must be calculated in kilograms. See
Sec. 173.24a(c)(1)(iv).
(k) Column 10: Vessel stowage requirements. Column 10A [Vessel
stowage] specifies the authorized stowage locations on board cargo and
passenger vessels. Column 10B [Other provisions] specifies codes for
stowage and handling requirements for specific hazardous materials.
Hazardous materials offered for transportation as limited quantities are
allocated stowage category A and are not subject to the stowage codes
assigned by column 10B. The meaning of each code in Column 10B is set
forth in Sec. 176.84 of this subchapter. Section 176.63 of this
subchapter sets forth the physical requirements for each of the
authorized locations listed in Column 10A. (For bulk transportation by
vessel, see 46 CFR parts 30 to 40, 70, 98, 148, 151, 153 and 154.) The
authorized stowage locations specified in Column 10A are defined as
follows:
(1) Stowage category ``A'' means the material may be stowed ``on
deck'' or ``under deck'' on a cargo vessel or on a passenger vessel.
(2) Stowage category ``B'' means--
(i) The material may be stowed ``on deck'' or ``under deck'' on a
cargo vessel and on a passenger vessel carrying a number of passengers
limited to not more than the larger of 25 passengers, or one passenger
per each 3 m of overall vessel length; and
(ii) ``On deck only'' on passenger vessels in which the number of
passengers specified in paragraph (k)(2)(i) of this section is exceeded.
(3) Stowage category ``C'' means the material must be stowed ``on
deck only'' on a cargo vessel or on a passenger vessel.
(4) Stowage category ``D'' means the material must be stowed ``on
deck only'' on a cargo vessel or on a passenger vessel carrying a number
of passengers limited to not more than the larger of 25 passengers or
one passenger per each 3 m of overall vessel length, but the material is
prohibited on a passenger vessel in which the limiting number of
passengers is exceeded.
(5) Stowage category ``E'' means the material may be stowed ``on
deck'' or ``under deck'' on a cargo vessel or on a passenger vessel
carrying a number of passengers limited to not more than the larger of
25 passengers, or one passenger per each 3 m of overall vessel length,
but is prohibited from carriage on a passenger vessel in which the
limiting number of passengers is exceeded.
(6) Stowage category ``01'' means the material may be stowed ``on
deck'' in closed cargo transport units or ``under deck'' on a cargo
vessel (up to 12 passengers) or on a passenger vessel.
(7) Stowage category ``02'' means the material may be stowed ``on
deck'' in closed cargo transport units or ``under deck'' on a cargo
vessel (up to 12 passengers) or ``on deck'' in closed cargo transport
units or ``under deck'' in closed cargo transport units on a passenger
vessel.
(8) Stowage category ``03'' means the material may be stowed ``on
deck'' in closed cargo transport units or ``under deck'' on a cargo
vessel (up to 12 passengers) but the material is prohibited on a
passenger vessel.
(9) Stowage category ``04'' means the material may be stowed ``on
deck'' in closed cargo transport units or ``under deck'' in closed cargo
transports on a cargo vessel (up to 12 passengers) but the material is
prohibited on a passenger vessel.
(10) Stowage category ``05'' means the material may be stowed ``on
deck'' in
[[Page 156]]
closed cargo transport units on a cargo vessel (up to 12 passengers) but
the material is prohibited on a passenger vessel.
(l) Changes to the Table. (1) Unless specifically stated otherwise
in a rule document published in the Federal Register amending the
Table--
(i) Such a change does not apply to the shipment of any package
filled prior to the effective date of the amendment; and
(ii) Stocks of preprinted shipping papers and package markings may
be continued in use, in the manner previously authorized, until depleted
or for a one-year period, subsequent to the effective date of the
amendment, whichever is less.
(2) Except as otherwise provided in this section, any alteration of
a shipping description or associated entry which is listed in the Sec.
172.101 Table must receive prior written approval from the Associate
Administrator.
(3) The proper shipping name of a hazardous material changed in the
May 6, 1997 final rule, in effect on October 1, 1997, only by the
addition or omission of the word ``compressed,'' ``inhibited,''
``liquefied'' or ``solution'' may continue to be used to comply with
package marking requirements, until January 1, 2003.
[[Page 157]]
Sec. 172.101 Hazardous Materials Table
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
(8) (9) (10) Vessel stowage
--------------------------------------------------------------------------------
Packaging (Sec. 173.***) Quantity limitations
Hazardous materials Hazard ------------------------------------ (see Sec. Sec.
Symbols descriptions and proper class or Identification PG Label Special provisions 173.27 and 175.75)
shipping names Division Numbers Codes (Sec. 172.102) ------------------------ Location Other
Exceptions Non-bulk Bulk Passenger Cargo
aircraft/ aircraft
rail only
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
(1) (2) (3) (4) (5) (6) (7) (8A) (8B) (8C) (9A) (9B) (10A) (10B)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Accellerene, see p-
Nitrosodimethylaniline
Accumulators, electric, see
Batteries, wet etc
Accumulators, pressurized,
pneumatic or hydraulic
(containing non-flamable gas),
see Articles pressurized,
pneumatic or hydraulic
(containing non-flamable gas)
Acetal 3 UN1088 II 3 IB2, T4, TP1 150 202 242 5 L 60 L E
Acetaldehyde 3 UN1089 I 3 A3, B16, T11, TP2, TP7 None 201 243 Forbidden 30 L E
A Acetaldehyde ammonia 9 UN1841 III 9 IB8, IP3, IP7, T1, TP33 155 204 240 200 kg 200 kg A 34
Acetaldehyde oxime 3 UN2332 III 3 B1, IB3, T4, TP1 150 203 242 60 L 220 L A
Acetic acid, glacial or Acetic 8 UN2789 II 8, 3 A3, A6, A7, A10, B2, 154 202 243 1 L 30 L A
acid solution, with more than IB2, T7, TP2
80 percent acid, by mass
Acetic acid solution, not less 8 UN2790 II 8 148, A3, A6, A7, A10, 154 202 242 1 L 30 L A
than 50 percent but not more B2, IB2, T7, TP2
than 80 percent acid, by mass
Acetic acid solution, with more 8 UN2790 III 8 148, IB3, T4, TP1 154 203 242 5 L 60 L A
than 10 percent and less than
50 percent acid, by mass
Acetic anhydride 8 UN1715 II 8, 3 A3, A6, A7, A10, B2, 154 202 243 1 L 30 L A 40
IB2, T7, TP2
Acetone 3 UN1090 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Acetone cyanohydrin, stabilized 6.1 UN1541 I 6.1 2, B9, B14, B32, B76, None 227 244 Forbidden Forbidden D 25, 40,
B77, N34, T20, TP2, 52, 53
TP13, TP38, TP45
Acetone oils 3 UN1091 II 3 IB2, T4, TP1, TP8 150 202 242 5 L 60 L B
Acetonitrile 3 UN1648 II 3 IB2, T7, TP2 150 202 242 5 L 60 L B 40
Acetyl acetone peroxide with Forbidden
more than 9 percent by mass
active oxygen
Acetyl benzoyl peroxide, solid, Forbidden
or with more than 40 percent
in solution
Acetyl bromide 8 UN1716 II 8 B2, IB2, T8, TP2 154 202 242 1 L 30 L C 40
[[Page 158]]
Acetyl chloride 3 UN1717 II 3, 8 A3, A6, A7, IB1, N34, 150 202 243 1 L 5 L B 40
T8, TP2
Acetyl cyclohexanesulfonyl Forbidden
peroxide, with more than 82
percent wetted with less than
12 percent water
Acetyl iodide 8 UN1898 II 8 B2, IB2, T7, TP2, TP13 154 202 242 1 L 30 L C 40
Acetyl methyl carbinol 3 UN2621 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Acetyl peroxide, solid, or with Forbidden
more than 25 percent in
solution
Acetylene, dissolved 2.1 UN1001 ..... 2.1 N86, N88 None 303 None Forbidden 15 kg D 25, 40,
57
Acetylene (liquefied) Forbidden
Acetylene silver nitrate Forbidden
Acetylene, solvent free Forbidden
Acetylene tetrabromide, see
Tetrabromoethane
Acid butyl phosphate, see Butyl
acid phosphate
Acid, sludge, see Sludge acid
Acridine 6.1 UN2713 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Acrolein dimer, stabilized 3 UN2607 III 3 387, B1, IB3, T2, TP1 150 203 242 60 L 220 L C 25, 40
Acrolein, stabilized 6.1 UN1092 I 6.1, 3 1, 380, 387, B9, B14, None 226 244 Forbidden Forbidden D 25, 40
B30, B42, B77, T22,
TP2, TP7, TP13, TP38,
TP44
Acrylamide, solid 6.1 UN2074 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 12, 25
Acrylamide solution 6.1 UN3426 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A 12, 25
Acrylic acid, stabilized 8 UN2218 II 8, 3 387, B2, IB2, T7, TP2 154 202 243 1 L 30 L C 25, 40
Acrylonitrile, stabilized 3 UN1093 I 3, 6.1 387, B9, T14, TP2, TP13 None 201 243 Forbidden 30 L D 25, 40
Actuating cartridge, explosive,
see Cartridges, power device
Adhesives, containing a 3 UN1133 I 3 T11, TP1, TP8, TP27 150 201 243 1 L 30 L B
flammable liquid
II 3 149, 383, B52, IB2, T4, 150 173 242 5 L 60 L B
TP1, TP8
III 3 B1, B52, IB3, T2, TP1 150 173 242 60 L 220 L A
[[Page 159]]
Adiponitrile 6.1 UN2205 III 6.1 IB3, T3, TP1 153 203 241 60 L 220 L A
G Adsorbed gas, n.o.s 2.2 UN3511 ..... 2.2 ....................... None 302c None 75 kg 150 kg A
G Adsorbed gas, flammable, n.o.s 2.1 UN3510 ..... 2.1 ....................... None 302c None Forbidden 150 kg D 40
G Adsorbed gas, oxidizing, n.o.s 2.2 UN3513 ..... 2.2, 5.1 ....................... None 302c None 75 kg 150 kg D
G Adsorbed gas, toxic, n.o.s. 2.3 UN3512 ..... 2.3 1 None 302c None Forbidden Forbidden D 40
Inhalation hazard zone A
G Adsorbed gas, toxic, n.o.s. 2.3 UN3512 ..... 2.3 2, B9, B14 None 302c None Forbidden Forbidden D 40
Inhalation hazard zone B
G Adsorbed gas, toxic, n.o.s. 2.3 UN3512 ..... 2.3 3, B14 None 302c None Forbidden Forbidden D 40
Inhalation hazard zone C
G Adsorbed gas, toxic, n.o.s. 2.3 UN3512 ..... 2.3 4 None 302c None Forbidden Forbidden D 40
Inhalation hazard zone D
G Adsorbed gas, toxic, corrosive, 2.3 UN3516 ..... 2.3, 8 1, 379 None 302c None Forbidden Forbidden D 40
n.o.s. Inhalation hazard zone
A
G Adsorbed gas, toxic, corrosive, 2.3 UN3516 ..... 2.3, 8 2, 379, B9, B14 None 302c None Forbidden Forbidden D 40
n.o.s. Inhalation hazard zone
B
G Adsorbed gas, toxic, corrosive, 2.3 UN3516 ..... 2.3, 8 3, 379, B14 None 302c None Forbidden Forbidden D 40
n.o.s. Inhalation hazard zone
C
G Adsorbed gas, toxic, corrosive, 2.3 UN3516 ..... 2.3, 8 4, 379 None 302c None Forbidden Forbidden D 40
n.o.s. Inhalation hazard zone
D
G Adsorbed gas, toxic, flammable, 2.3 UN3514 ..... 2.3, 2.1 1 None 302c None Forbidden Forbidden D 40
n.o.s. Inhalation hazard zone
A
G Adsorbed gas, toxic, flammable, 2.3 UN3514 ..... 2.3, 2.1 2, B9, B14 None 302c None Forbidden Forbidden D 40
n.o.s. Inhalation hazard zone
B
G Adsorbed gas, toxic, flammable, 2.3 UN3514 ..... 2.3, 2.1 3, B14 None 302c None Forbidden Forbidden D 40
n.o.s. Inhalation hazard zone
C
G Adsorbed gas, toxic, flammable, 2.3 UN3514 ..... 2.3, 2.1 4 None 302c None Forbidden Forbidden D 40
n.o.s. Inhalation hazard zone
D
G Adsorbed gas, toxic, flammable, 2.3 UN3517 ..... 2.3, 1 None 302c None Forbidden Forbidden D 17, 40
corrosive, n.o.s. Inhalation 2.1, 8
hazard zone A
G Adsorbed gas, toxic, flammable, 2.3 UN3517 ..... 2.3, 2, B9, B14 None 302c None Forbidden Forbidden D 17, 40
corrosive, n.o.s. Inhalation 2.1, 8
hazard zone B
G Adsorbed gas, toxic, flammable, 2.3 UN3517 ..... 2.3, 3, B14 None 302c None Forbidden Forbidden D 17, 40
corrosive, n.o.s. Inhalation 2.1, 8
hazard zone C
G Adsorbed gas, toxic, flammable, 2.3 UN3517 ..... 2.3, 4 None 302c None Forbidden Forbidden D 17, 40
corrosive, n.o.s. Inhalation 2.1, 8
hazard zone D
G Adsorbed gas, toxic, oxidizing, 2.3 UN3515 ..... 2.3, 5.1 1 None 302c None Forbidden Forbidden D 40
n.o.s. Inhalation hazard zone
A
G Adsorbed gas, toxic, oxidizing, 2.3 UN3515 ..... 2.3, 5.1 2, B9, B14 None 302c None Forbidden Forbidden D 40
n.o.s. Inhalation hazard zone
B
G Adsorbed gas, toxic, oxidizing, 2.3 UN3515 ..... 2.3, 5.1 3, B14 None 302c None Forbidden Forbidden D 40
n.o.s. Inhalation hazard zone
C
G Adsorbed gas, toxic, oxidizing, 2.3 UN3515 ..... 2.3, 5.1 4 None 302c None Forbidden Forbidden D 40
n.o.s. Inhalation hazard zone
D
[[Page 160]]
G Adsorbed gas, toxic, oxidizing, 2.3 UN3518 ..... 2.3, 1 None 302c None Forbidden Forbidden D 40, 89,
corrosive, n.o.s. Inhalation 5.1, 8 90
hazard zone A
G Adsorbed gas, toxic, oxidizing, 2.3 UN3518 ..... 2.3, 2, B9, B14 None 302c None Forbidden Forbidden D 40, 89,
corrosive, n.o.s. Inhalation 5.1, 8 90
hazard zone B
G Adsorbed gas, toxic, oxidizing, 2.3 UN3518 ..... 2.3, 3, B14 None 302c None Forbidden Forbidden D 40, 89,
corrosive, n.o.s. Inhalation 5.1, 8 90
hazard zone C
G Adsorbed gas, toxic, oxidizing, 2.3 UN3518 ..... 2.3, 4 None 302c None Forbidden Forbidden D 40, 89,
corrosive, n.o.s. Inhalation 5.1, 8 90
hazard zone D
Aerosols, corrosive, Packing 2.2 UN1950 ..... 2.2, 8 A34 306 None None 75 kg 150 kg A 25, 87,
Group II or III, (each not 126
exceeding 1 L capacity).
Aerosols, flammable, (each not 2.1 UN1950 ..... 2.1 N82 306 None None 75 kg 150 kg A 25, 87,
exceeding 1 L capacity) 126
Aerosols, flammable, n.o.s. 2.1 UN1950 ..... 2.1 N82 306 304 None Forbidden 150 kg A 25, 87,
(engine starting fluid) (each 126
not exceeding 1 L capacity)
Aerosols, non-flammable, (each 2.2 UN1950 ..... 2.2 ....................... 306 None None 75 kg 150 kg A 25, 87,
not exceeding 1 L capacity) 126
Aerosols, poison, Packing Group 2.2 UN1950 ..... 2.2, 6.1 ....................... 306 None None Forbidden Forbidden A 25, 87,
III (each not exceeding 1 L 126
capacity)
Air bag inflators, or Air bag
modules, or Seat-belt
pretensioners, see Safety
devices, electrically
initiated or Safety devices,
pyrotechnic
Air, compressed 2.2 UN1002 ..... 2.2 78 306, 307 302 302 75 kg 150 kg A
Air, refrigerated liquid, 2.2 UN1003 ..... 2.2, 5.1 T75, TP5, TP22 320 316 318, 319 Forbidden Forbidden D 51
(cryogenic liquid)
Air, refrigerated liquid, 2.2 UN1003 ..... 2.2, 5.1 T75, TP5, TP22 320 316 318, 319 Forbidden Forbidden D 51
(cryogenic liquid) non-
pressurized
Aircraft engines (including
turbines), see Engines,
internal combustion
[[Page 161]]
Aircraft evacuation slides, see
Life saving appliances etc
Aircraft hydraulic power unit 3 UN3165 I 3, 6.1, ....................... None 172 None Forbidden 42 L E 21, 40,
fuel tank (containing a 8 49, 100
mixture of anhydrous hydrazine
and monomethyl hydrazine) (M86
fuel)
Aircraft survival kits, see
Life saving appliances etc
G Alcoholates solution, n.o.s., 3 UN3274 II 3, 8 IB2 150 202 243 1 L 5 L B
in alcohol
Alcoholic beverages 3 UN3065 II 3 24, 149, B1, IB2, T4, 150 202 242 5 L 60 L A
TP1
............................... ......... ................ III 3 24, B1, IB3, N11, T2, 150 203 242 60 L 220 L A
TP1
Alcohols, n.o.s. 3 UN1987 I 3 172, T11, TP1, TP8, 4b 201 243 1 L 30 L E
TP27
......... ................ II 3 172, IB2, T7, TP1, TP8, 4b, 150 202 242 5 L 60 L B
TP28
......... ................ III 3 172, B1, IB3, T4, TP1, 4b, 150 203 242 60 L 220 L A
TP29
G Alcohols, flammable, toxic 3 UN1986 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L E 40
n.o.s
II 3, 6.1 IB2, T11, TP2, TP27 150 202 243 1 L 60 L B 40
III 3, 6.1 B1, IB3, T7, TP1, TP28 150 203 242 60 L 220 L A
Aldehydes, n.o.s. 3 UN1989 I 3 T11, TP1, TP27 None 201 243 1 L 30 L E
............................... ......... ................ II 3 IB2, T7, TP1, TP8, TP28 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T4, TP1, TP29 150 203 242 60 L 220 L A
G Aldehydes, flammable, toxic, 3 UN1988 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L E 40
n.o.s.
............................... ......... ................ II 3, 6.1 IB2, T11, TP2, TP27 150 202 243 1 L 60 L B 40
............................... ......... ................ III 3, 6.1 B1, IB3, T7, TP1, TP28 150 203 242 60 L 220 L A
Aldol 6.1 UN2839 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 12, 25
G Alkali metal alcoholates, self- 4.2 UN3206 II 4.2, 8 64, A7, IB5, IP2, T3, None 212 242 15 kg 50 kg B
heating, corrosive, n.o.s TP33, W31
......... III 4.2, 8 64, A7, IB8, IP3, T1, None 213 242 25 kg 100 kg B
TP33, W31
Alkali metal alloys, liquid, 4.3 UN1421 I 4.3 A2, A3, A7, B48, N34, None 201 244 Forbidden 1 L D 13, 52,
n.o.s W31 148
Alkali metal amalgam, liquid 4.3 UN1389 I 4.3 A2, A3, A7, N34, W31 None 201 244 Forbidden 1 L D 13, 40,
52, 148
Alkali metal amalgam, solid 4.3 UN3401 I 4.3 IB4, IP1, N40, T9, TP7, None 211 242 Forbidden 15 kg D 13, 52,
TP33, W32 148
Alkali metal amides 4.3 UN1390 II 4.3 A6, A7, A8, A19, A20, 151 212 241 15 kg 50 kg E 13, 40,
IB7, IP2, IP21, T3, 52, 148
TP33, W31, W40
Alkali metal dispersions, 4.3 UN3482 I 4.3, 3 A2, A3, A7, W31 None 201 244 Forbidden 1 L D 13, 52,
flammable or Alkaline earth 148
metal dispersions, flammable
Alkali metal dispersions, or 4.3 UN1391 I 4.3 A2, A3, A7, W31 None 201 244 Forbidden 1 L D 13, 52,
Alkaline earth metal 148
dispersions
[[Page 162]]
Alkaline corrosive liquids,
n.o.s., see Caustic alkali
liquids, n.o.s.
G Alkaline earth metal 4.2 UN3205 II 4.2 65, A7, IB6, IP2, T3, None 212 241 15 kg 50 kg B
alcoholates, n.o.s TP33, W31
......... III 4.2 65, A7, IB8, IP3, T1, None 213 241 25 kg 100 kg B
TP33, W31
Alkaline earth metal alloys, 4.3 UN1393 II 4.3 A19, IB7, IP2, IP4, T3, 151 212 241 15 kg 50 kg E 13, 52,
n.o.s TP33, W31, W40 148
Alkaline earth metal amalgams, 4.3 UN1392 I 4.3 A19, N34, N40, W31 None 201 244 Forbidden 1 L E 13, 40,
liquid 52, 148
Alkaline earth metal amalgams, 4.3 UN3402 I 4.3 A19, N34, N40, T9, TP7, None 211 242 Forbidden 15 kg D 13, 52,
solid TP33, W32 148
G Alkaloids, liquid, n.o.s., or 6.1 UN3140 I 6.1 A4, T14, TP2, TP27 None 201 243 1 L 30 L A
Alkaloid salts, liquid, n.o.s.
............................... ......... ................ II 6.1 IB2, T11, TP2, TP27 153 202 243 5 L 60 L A
............................... ......... ................ III 6.1 IB3, T7, TP1, TP28 153 203 241 60 L 220 L A
G Alkaloids, solid, n.o.s. or 6.1 UN1544 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A .......
Alkaloid salts, solid, n.o.s.
poisonous
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A .......
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A .......
Alkyl sulfonic acids, liquid or 8 UN2584 II 8 B2, IB2, T8, TP2, TP13 154 202 242 1 L 30 L B
Aryl sulfonic acids, liquid
with more than 5 percent free
sulfuric acid
Alkyl sulfonic acids, liquid or 8 UN2586 III 8 IB3, T4, TP1 154 203 241 5 L 60 L B
Aryl sulfonic acids, liquid
with not more than 5 percent
free sulfuric acid
Alkyl sulfonic acids, solid or 8 UN2583 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A
Aryl sulfonic acids, solid,
with more than 5 percent free
sulfuric acid
Alkyl sulfonic acids, solid or 8 UN2585 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
Aryl sulfonic acids, solid
with not more than 5 percent
free sulfuric acid
Alkylphenols, liquid, n.o.s. 8 UN3145 I 8 A6, T14, TP2 None 201 243 0.5 L 2.5 L B
(including C2-C12 homologues)
............................... ......... ................ II 8 IB2, T11, TP2, TP27 154 202 242 1 L 30 L B
............................... ......... ................ III 8 IB3, T7, TP1, TP28 154 203 241 5 L 60 L A
[[Page 163]]
Alkylphenols, solid, n.o.s. 8 UN2430 I 8 IB7, IP1, T6, TP33 None 211 242 1 kg 25 kg B
(including C2-C12 homologues)
............................... ......... ................ II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg B
............................... ......... ................ III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
Alkylsulfuric acids 8 UN2571 II 8 B2, IB2, T8, TP2, TP13, 154 202 242 1 L 30 L C 14
TP28
Allethrin, see Pesticides,
liquid, toxic, n.o.s.
Allyl acetate 3 UN2333 II 3, 6.1 IB2, T7, TP1, TP13 150 202 243 1 L 60 L E 40
Allyl alcohol 6.1 UN1098 I 6.1, 3 2, B9, B14, B32, B77, None 227 244 Forbidden Forbidden D 40
T20, TP2, TP13, TP38,
TP45
Allyl bromide 3 UN1099 I 3, 6.1 T14, TP2, TP13 None 201 243 Forbidden 30 L B 40
Allyl chloride 3 UN1100 I 3, 6.1 T14, TP2, TP13 None 201 243 Forbidden 30 L E 40
Allyl chlorocarbonate, see
Allyl chloroformate
Allyl chloroformate 6.1 UN1722 I 6.1, 3, 2, B9, B14, B32, N41, None 227 244 Forbidden Forbidden D 21, 40,
8 T20, TP2, TP13, TP38, 100
TP45
Allyl ethyl ether 3 UN2335 II 3, 6.1 IB2, T7, TP1, TP13 150 202 243 1 L 60 L E 40
Allyl formate 3 UN2336 I 3, 6.1 T14, TP2, TP13 None 201 243 Forbidden 30 L E 40
Allyl glycidyl ether 3 UN2219 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Allyl iodide 3 UN1723 II 3, 8 A3, A6, IB1, N34, T7, 150 202 243 1 L 5 L B 40
TP2, TP13
Allyl isothiocyanate, 6.1 UN1545 II 6.1, 3 387, A3, A7, IB2, T7, None 202 243 Forbidden 60 L D 25, 40
stabilized TP2
Allylamine 6.1 UN2334 I 6.1, 3 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40
TP2, TP13, TP38, TP45
Allyltrichlorosilane, 8 UN1724 II 8, 3 387, A7, B2, B6, N34, None 206 243 Forbidden 30 L C 25, 40
stabilized T10, TP2, TP7, TP13
Aluminum borohydride or 4.2 UN2870 I 4.2, 4.3 B11, T21, TP7, TP33 None 181 244 Forbidden Forbidden D 13, 148
Aluminum borohydride in
devices
Aluminum bromide, anhydrous 8 UN1725 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A 40
Aluminum bromide, solution 8 UN2580 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
Aluminum carbide 4.3 UN1394 II 4.3 A20, IB7, IP2, IP21, 151 212 242 15 kg 50 kg A 13, 52,
N41, T3, TP33, W31, W40 148
Aluminum chloride, anhydrous 8 UN1726 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A 40
Aluminum chloride, solution 8 UN2581 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
Aluminum dross, wet or hot Forbidden
Aluminum ferrosilicon powder 4.3 UN1395 II 4.3, 6.1 A19, IB5, IP2, T3, 151 212 242 15 kg 50 kg A 13, 39,
TP33, W31, W40 40, 52,
53, 85,
103,
148
......... III 4.3, 6.1 A19, A20, IB4 151 213 241 25 kg 100 kg A 13, 39,
40, 52,
53, 85,
103,
148
[[Page 164]]
Aluminum hydride 4.3 UN2463 I 4.3 A19, N40, W32 None 211 242 Forbidden 15 kg E 13, 148
D Aluminum, molten 9 NA9260 III 9 IB3, T1, TP3 None None 247 Forbidden Forbidden D
Aluminum nitrate 5.1 UN1438 III 5.1 A1, A29, IB8, IP3, T1, 152 213 240 25 kg 100 kg A
TP33
Aluminum phosphate solution,
see Corrosive liquids, etc
Aluminum phosphide 4.3 UN1397 I 4.3, 6.1 A8, A19, N40, W32 None 211 242 Forbidden 15 kg E 13, 40,
52, 85,
148
Aluminum phosphide pesticides 6.1 UN3048 I 6.1 A8, IB7, IP1, T6, TP33, None 211 242 Forbidden 15 kg E 40, 85
W31
Aluminum powder, coated 4.1 UN1309 II 4.1 IB8, IP2, IP21, T3, 151 212 240 15 kg 50 kg A 13, 39,
TP33, W100 52, 53,
74,
101,
147,
148
......... III 4.1 B134, IB8, IP21, T1, 151 213 240 25 kg 100 kg A 13, 39,
TP33, W100 52, 53,
74,
101,
147,
148
Aluminum powder, uncoated 4.3 UN1396 II 4.3 A19, A20, IB7, IP2, 151 212 242 15 kg 50 kg A 13, 39,
IP21, T3, TP33, W31, 52, 53,
W40 148
......... III 4.3 A19, A20, IB8, IP21, 151 213 241 25 kg 100 kg A 13, 39,
T1, TP33, W31, W40 52, 53,
148
Aluminum resinate 4.1 UN2715 III 4.1 IB6, T1, TP33 151 213 240 25 kg 100 kg A
Aluminum silicon powder, 4.3 UN1398 III 4.3 A1, A19, IB8, IP4, T1, 151 213 241 25 kg 100 kg A 13, 39,
uncoated TP33, W31, W40 40, 52,
53, 85,
103,
148
[[Page 165]]
Aluminum smelting by-products 4.3 UN3170 II 4.3 128, B115, IB7, IP2, None 212 242 15 kg 50 kg B 13, 85,
or Aluminum remelting by- IP21, T3, TP33, W31, 103,
products W40 148
......... III 4.3 128, B115, IB8, IP21, None 213 241 25 kg 100 kg B 13, 85,
T1, TP33, W31 103,
148
Amatols, see Explosives,
blasting, type B
G Amine, flammable, corrosive, 3 UN2733 I 3, 8 T14, TP1, TP27 None 201 243 0.5 L 2.5 L D 40, 52
n.o.s. or Polyamines,
flammable, corrosive, n.o.s
II 3, 8 IB2, T11, TP1, TP27 150 202 243 1 L 5 L B 40, 52
III 3, 8 B1, IB3, T7, TP1, TP28 150 203 242 5 L 60 L A 40, 52
G Amine, liquid, corrosive, 8 UN2734 I 8, 3 A3, A6, N34, T14, TP2, None 201 243 0.5 L 2.5 L A 52
flammable, n.o.s. or TP27
Polyamines, liquid, corrosive,
flammable, n.o.s
II 8, 3 IB2, T11, TP2, TP27 None 202 243 1 L 30 L A 52
G Amines, liquid, corrosive, 8 UN2735 I 8 A3, A6, B10, N34, T14, None 201 243 0.5 L 2.5 L A 52
n.o.s., or Polyamines, liquid, TP2, TP27
corrosive, n.o.s.
............................... ......... ................ II 8 B2, IB2, T11, TP1, TP27 154 202 242 1 L 30 L A 52
............................... ......... ................ III 8 IB3, T7, TP1, TP28 154 203 241 5 L 60 L A 52
G Amines, solid, corrosive, 8 UN3259 I 8 IB7, IP1, T6, TP33 None 211 242 1 kg 25 kg A 52
n.o.s., or Polyamines, solid,
corrosive n.o.s.
............................... ......... ................ II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A 52
............................... ......... ................ III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A 52
2-Amino-4-chlorophenol 6.1 UN2673 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
2-Amino-5-diethylaminopentane 6.1 UN2946 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
2-Amino-4,6-Dinitrophenol, 4.1 UN3317 I 4.1 23, A8, A19, A20, N41, None 211 None 1 kg 15 kg E 28, 36
wetted with not less than 20 W31
percent water by mass
2-(2-Aminoethoxy) ethanol 8 UN3055 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
N-Aminoethylpiperazine 8 UN2815 III 8, 6.1 IB3, T4, TP1 154 203 241 5 L 60 L B 12, 25,
40
+ Aminophenols (o-; m-; p-) 6.1 UN2512 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Aminopropyldiethanolamine, see
Amines, etc
n-Aminopropylmorpholine, see
Amines, etc
Aminopyridines (o-; m-; p-) 6.1 UN2671 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B 12, 25,
40, 52
I Ammonia, anhydrous 2.3 UN1005 ..... 2.3, 8 4, 379, N87, T50 None 304 314, 315 Forbidden Forbidden D 40, 52,
57
D Ammonia, anhydrous 2.2 UN1005 ..... 2.2 13, 379, T50 None 304 314, 315 Forbidden Forbidden D 40, 52,
57
[[Page 166]]
Ammonia solution, relative 2.2 UN2073 2.2 N87 306 304 314, 315 Forbidden 150 kg E 40, 52,
density less than 0.880 at 15 57
degrees C in water, with more
than 35 percent but not more
than 50 percent ammonia
Ammonia solution, relative 8 UN2672 III 8 336, IB3, IP8, T7, TP2 154 203 241 5L 60L A 40, 52,
density between 0.880 and 85
0.957 at 15 degrees C in
water, with more than 10
percent but not more than 35
percent ammonia
I Ammonia solution, relative 2.3 UN3318 ..... 2.3, 8 4, N87, T50 None 304 314, 315 Forbidden Forbidden D 40, 52,
density less than 0.880 at 15 57
degrees C in water, with more
than 50 percent ammonia
D Ammonia solution, relative 2.2 UN3318 ..... 2.2 13, T50 None 304 314, 315 Forbidden Forbidden D 40, 52,
density less than 0.880 at 15 57
degrees C in water, with more
than 50 percent ammonia
Ammonium arsenate 6.1 UN1546 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 53
Ammonium azide Forbidden
Ammonium bifluoride, solid, see
Ammonium hydrogen difluoride,
solid
Ammonium bifluoride solution,
see Ammonium hydrogen
difluoride, solution
Ammonium bromate Forbidden
Ammonium chlorate Forbidden
Ammonium dichromate 5.1 UN1439 II 5.1 IB8, IP2, IP4, T3, TP33 152 212 242 5 kg 25 kg A 52
Ammonium dinitro-o-cresolate, 6.1 UN1843 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B 36, 65,
solid 66, 77
Ammonium dinitro-o-cresolate 6.1 UN3424 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L B 36, 66,
solution 78, 91
............................... ......... ................ III 6.1 IB2, T7, TP2 153 203 241 60 L 220 L A 36, 66,
78, 91
Ammonium fluoride 6.1 UN2505 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 52
Ammonium fluorosilicate 6.1 UN2854 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 52
Ammonium fulminate Forbidden
[[Page 167]]
Ammonium hydrogen sulfate 8 UN2506 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A 40
Ammonium hydrogendifluoride, 8 UN1727 II 8 IB8, IP2, IP4, N34, T3, 154 212 240 15 kg 50 kg A 25, 40,
solid TP33 52
Ammonium hydrogendifluoride, 8 UN2817 II 8, 6.1 IB2, N34, T8, TP2, TP13 154 202 243 1 L 30 L B 40
solution
............................... ......... ................ III 8, 6.1 IB3, N3, T4, TP1 , TP13 154 203 241 5 L 60 L B 40, 95
Ammonium hydrosulfide,
solution, see Ammonium sulfide
solution
D Ammonium hydroxide, see Ammonia
solutions, etc
Ammonium metavanadate 6.1 UN2859 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 44, 89,
100,
141
Ammonium nitrate based 5.1 UN2067 III 5.1 52, 148, 150, B120, 152 213 240 25 kg 100 kg B 25, 59,
fertilizer IB8, IP3, T1, TP33 60, 66,
117,
124*
A W Ammonium nitrate based 9 UN2071 III 9 132, IB8, IP3 155 213 240 200 kg 200 kg A
fertilizer
Ammonium nitrate emulsion or 5.1 UN3375 II 5.1 147, 148, 163, IB2, None 231 251 Forbidden Forbidden D 25, 59,
Ammonium nitrate suspension or IP16 60, 66,
Ammonium nitrate gel, 124
intermediate for blasting
explosives
D Ammonium nitrate-fuel oil 1.5D NA0331 ..... 1.5D 148 None 62 None Forbidden Forbidden 03 25, 19E
mixture containing only
prilled ammonium nitrate and
fuel oil
Ammonium nitrate, liquid (hot 5.1 UN2426 ..... 5.1 148, B5, T7 None None 243 Forbidden Forbidden D 59, 60,
concentrated solution) 124
Ammonium nitrate, with more 1.1D UN0222 ..... 1.1D 370 None 62 None Forbidden Forbidden 04 25, 19E
than 0.2 percent combustible
substances, including any
organic substance calculated
as carbon, to the exclusion of
any other added substance
Ammonium nitrate, with not more 5.1 UN1942 III 5.1 148, A1, A29, B120, 152 213 240 25 kg 100 kg A 25, 59,
than 0.2% combustible IB8, IP3, T1, TP33 60, 66,
substances, including any 116,
organic substance calculated 124
as carbon, to the exclusion of
any other added substance
Ammonium nitrite Forbidden
Ammonium perchlorate 1.1D UN0402 ..... 1.1D 107 None 62 None Forbidden Forbidden 04 25, 19E
Ammonium perchlorate 5.1 UN1442 II 5.1 107, A9, IB6, IP2, T3, 152 212 242 5 kg 25 kg E 58, 69
TP33
Ammonium permanganate Forbidden
Ammonium persulfate 5.1 UN1444 III 5.1 A1, A29, IB8, IP3, T1, 152 213 240 25 kg 100 kg A
TP33
Ammonium picrate, dry or wetted 1.1D UN0004 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25, 5E,
with less than 10 percent 19E
water, by mass
[[Page 168]]
Ammonium picrate, wetted with 4.1 UN1310 I 4.1 23, A2, N41, W31 None 211 None 0.5 kg 0.5 kg D 28, 36
not less than 10 percent
water, by mass
Ammonium polysulfide, solution 8 UN2818 II 8, 6.1 IB2, T7, TP2, TP13 154 202 243 1 L 30 L B 12, 25,
40, 52
III 8, 6.1 IB3, T4, TP1, TP13 154 203 241 5 L 60 L B 12, 25,
40, 52
Ammonium polyvanadate 6.1 UN2861 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 44, 89,
100,
141
Ammonium silicofluoride, see
Ammonium fluorosilicate
Ammonium sulfide solution 8 UN2683 II 8, 6.1, IB1, T7, TP2, TP13 154 202 243 1 L 30 L B 12, 22,
3 25, 52,
100
Ammunition, blank, see
Cartridges for weapons, blank
Ammunition, illuminating with 1.2G UN0171 ..... 1.2G ....................... ............ 62 62 Forbidden Forbidden 03 25
or without burster, expelling
charge or propelling charge
Ammunition, illuminating with 1.3G UN0254 ..... 1.3G ....................... ............ 62 62 Forbidden Forbidden 03 25
or without burster, expelling
charge or propelling charge
Ammunition, illuminating with 1.4G UN0297 ..... 1.4G ....................... ............ 62 62 Forbidden 75 kg 02 25
or without burster, expelling
charge or propelling charge
Ammunition, incendiary liquid 1.3J UN0247 ..... 1.3J ....................... ............ 62 None Forbidden Forbidden 05 25, 23E
or gel, with burster,
expelling charge or propelling
charge
Ammunition, incendiary (water-
activated contrivances) with
burster, expelling charge or
propelling charge, see
Contrivances, water-activated,
etc.
[[Page 169]]
Ammunition, incendiary, white 1.2H UN0243 ..... 1.2H ....................... ............ 62 62 Forbidden Forbidden 05 25,
phosphorus, with burster, 14E,
expelling charge or propelling 15E,
charge 17E
Ammunition, incendiary, white 1.3H UN0244 ..... 1.3H ....................... ............ 62 62 Forbidden Forbidden 05 25,
phosphorus, with burster, 14E,
expelling charge or propelling 15E,
charge 17E
Ammunition, incendiary with or 1.2G UN0009 ..... 1.2G ....................... ............ 62 62 Forbidden Forbidden 03 25
without burster, expelling
charge, or propelling charge
Ammunition, incendiary with or 1.3G UN0010 ..... 1.3G ....................... ............ 62 62 Forbidden Forbidden 03 25
without burster, expelling
charge, or propelling charge
Ammunition, incendiary with or 1.4G UN0300 ..... 1.4G ....................... ............ 62 62 Forbidden 75 kg 02 25
without burster, expelling
charge or propelling charge
Ammunition, practice 1.4G UN0362 ..... 1.4G ....................... ............ 62 62 Forbidden 75 kg 02 25
Ammunition, practice 1.3G UN0488 ..... 1.3G ....................... ............ 62 62 Forbidden Forbidden 03 25
Ammunition, proof 1.4G UN0363 ..... 1.4G ....................... ............ 62 62 Forbidden 75 kg 02 25
Ammunition, rocket, see
Warheads, rocket etc
Ammunition, SA (small arms),
see Cartridges for weapons,
etc
Ammunition, smoke (water-
activated contrivances), white
phosphorus, with burster,
expelling charge or propelling
charge, see Contrivances,
water-activated, etc. (UN
0248)
Ammunition, smoke (water-
activated contrivances),
without white phosphorus or
phosphides, with burster,
expelling charge or propelling
charge, see Contrivances,
water-activated, etc. (UN
0249)
Ammunition smoke, white 1.2H UN0245 ..... 1.2H ....................... ............ 62 62 Forbidden Forbidden 05 25,
phosphorus with burster, 14E,
expelling charge, or 15E,
propelling charge 17E
Ammunition, smoke, white 1.3H UN0246 ..... 1.3H ....................... ............ 62 62 Forbidden Forbidden 05 25,
phosphorus with burster, 14E,
expelling charge, or 15E,
propelling charge 17E
Ammunition, smoke with or 1.2G UN0015 ..... 1.2G ....................... ............ 62 62 Forbidden Forbidden 03 25, 17E
without burster, expelling
charge or propelling charge
Ammunition, smoke with or 1.3G UN0016 ..... 1.3G ....................... ............ 62 62 Forbidden Forbidden 03 25, 17E
without burster, expelling
charge or propelling charge
[[Page 170]]
Ammunition, smoke with or 1.4G UN0303 ..... 1.4G ....................... ............ 62 62 Forbidden 75 kg 02 25,
without burster, expelling 14E,
charge or propelling charge 15E,
17E
Ammunition, sporting, see
Cartridges for weapons, etc.
(UN 0012; UN 0328; UN 0339)
Ammunition, tear-producing, non- 6.1 UN2017 ..... 6.1, 8 ....................... None 212 None Forbidden 50 kg E 13, 40
explosive, without burster or
expelling charge, non-fuzed
Ammunition, tear-producing with 1.2G UN0018 ..... 1.2G, 8, ....................... ............ 62 62 Forbidden Forbidden 03 25, 17E
burster, expelling charge or 6.1
propelling charge
Ammunition, tear-producing with 1.3G UN0019 ..... 1.3G, 8, ....................... ............ 62 62 Forbidden Forbidden 03 25, 17E
burster, expelling charge or 6.1
propelling charge
Ammunition, tear-producing with 1.4G UN0301 ..... 1.4G, 8, ....................... ............ 62 62 Forbidden 75 kg 02 25,
burster, expelling charge or 6.1 14E,
propelling charge 15E,
17E
Ammunition, toxic, non- 6.1 UN2016 ..... 6.1 ....................... None 212 None Forbidden 100 kg E 13, 40
explosive, without burster or
expelling charge, non-fuzed
Ammunition, toxic (water-
activated contrivances), with
burster, expelling charge or
propelling charge, see
Contrivances, water-activated,
etc
G Ammunition, toxic with burster, 1.2K UN0020 ..... 1.2K, ....................... ............ 62 None Forbidden Forbidden 05 25,
expelling charge, or 6.1 14E,
propelling charge 15E,
17E
G Ammunition, toxic with burster, 1.3K UN0021 ..... 1.3K, ....................... ............ 62 None Forbidden Forbidden 05 25,
expelling charge, or 6.1 14E,
propelling charge 15E,
17E
Amyl acetates 3 UN1104 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
[[Page 171]]
Amyl acid phosphate 8 UN2819 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
Amyl butyrates 3 UN2620 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Amyl chloride 3 UN1107 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Amyl formates 3 UN1109 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Amyl mercaptan 3 UN1111 II 3 A3, A6, IB2, T4, TP1 None 202 242 5 L 60 L B 95, 102
n-Amyl methyl ketone 3 UN1110 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Amyl nitrate 3 UN1112 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A 40
Amyl nitrite 3 UN1113 II 3 IB2, T4, TP1 150 202 242 5 L 60 L E 40
Amylamines 3 UN1106 II 3, 8 IB2, T7, TP1 150 202 243 1 L 5 L B
............................... ......... ................ III 3, 8 B1, IB3, T4, TP1 150 203 242 5 L 60 L A
Amyltrichlorosilane 8 UN1728 II 8 A7, B2, B6, N34, T10, None 206 242 Forbidden 30 L C 40
TP2, TP7, TP13
Anhydrous ammonia, see Ammonia,
anhydrous
Anhydrous hydrofluoric acid,
see Hydrogen fluoride,
anhydrous
+ Aniline 6.1 UN1547 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 40, 52
Aniline hydrochloride 6.1 UN1548 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Aniline oil, see Aniline
Anisidines 6.1 UN2431 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Anisole 3 UN2222 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Anisoyl chloride 8 UN1729 II 8 B2, B4, IB8, IP2, IP4, 154 212 240 15 kg 50 kg A 40
T3, TP33
Anti-freeze, liquid, see
Flammable liquids, n.o.s.
Antimonous chloride, see
Antimony trichloride
G Antimony compounds, inorganic, 6.1 UN3141 III 6.1 35, IB3, T7, TP1, TP28 153 203 241 60 L 220 L A
liquid, n.o.s
G Antimony compounds, inorganic, 6.1 UN1549 III 6.1 35, IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
solid, n.o.s
Antimony lactate 6.1 UN1550 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Antimony pentachloride, liquid 8 UN1730 II 8 B2, IB2, T7, TP2 None 202 242 1 L 30 L C 40
Antimony pentachloride, 8 UN1731 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L C 40
solutions
............................... ......... ................ III 8 IB3, T4, TP1 154 203 241 5 L 60 L C 40
Antimony pentafluoride 8 UN1732 II 8, 6.1 A3, A6, A7, A10, IB2, None 202 243 Forbidden 30 L D 40, 44,
N3, N36, T7, TP2 89,
100,
141
Antimony potassium tartrate 6.1 UN1551 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Antimony powder 6.1 UN2871 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Antimony sulfide and a Forbidden
chlorate, mixtures of
Antimony sulfide, solid, see
Antimony compounds, inorganic,
n.o.s.
Antimony trichloride, liquid 8 UN1733 II 8 B2, IB2 154 202 242 1 L 30 L C 40
Antimony trichloride, solid 8 UN1733 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A 40.
Aqua ammonia, see Ammonia
solution, etc
[[Page 172]]
Argon, compressed 2.2 UN1006 ..... 2.2 ....................... 306, 307 302 314, 315 75 kg 150 kg A
Argon, refrigerated liquid 2.2 UN1951 ..... 2.2 T75, TP5 320 316 318 50 kg 500 kg D
(cryogenic liquid)
Arsenic 6.1 UN1558 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Arsenic acid, liquid 6.1 UN1553 I 6.1 T20, TP2, TP7, TP13, None 201 243 1 L 30 L B 46
W31
Arsenic acid, solid 6.1 UN1554 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Arsenic bromide 6.1 UN1555 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 12, 25,
40
Arsenic chloride, see Arsenic
trichloride
G Arsenic compounds, liquid, 6.1 UN1556 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40, 137
n.o.s. inorganic, including
arsenates, n.o.s.; arsenites,
n.o.s.; arsenic sulfides,
n.o.s.; and organic compounds
of arsenic, n.o.s
......... ................ II 6.1 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40, 137
TP27
......... ................ III 6.1 IB3, T7, TP2, TP28 153 203 241 60 L 220 L B 40, 137
G Arsenic compounds, solid, 6.1 UN1557 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 137
n.o.s. inorganic, including
arsenates, n.o.s.; arsenites,
n.o.s.; arsenic sulfides,
n.o.s.; and organic compounds
of arsenic, n.o.s
......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 137
......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 137
Arsenic pentoxide 6.1 UN1559 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Arsenic sulfide and a chlorate, Forbidden
mixtures of
Arsenic trichloride 6.1 UN1560 I 6.1 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden B 40
TP2, TP13, TP38, TP45
Arsenic trioxide 6.1 UN1561 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Arsenic, white, solid, see
Arsenic trioxide
Arsenical dust 6.1 UN1562 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
[[Page 173]]
Arsenical pesticides, liquid, 3 UN2760 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L B 40
flammable, toxic, flash point
less than 23 degrees C
............................... ......... ................ II 3, 6.1 IB2, T11, TP2, TP13, 150 202 243 1 L 60 L B 40
TP27
Arsenical pesticides, liquid, 6.1 UN2994 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
toxic
............................... ......... ................ II 6.1 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1 IB3, T7, TP2, TP28 153 203 241 60 L 220 L A 40
Arsenical pesticides, liquid, 6.1 UN2993 I 6.1, 3 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
toxic, flammable, flash point
not less than 23 degrees C
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1, 3 B1, IB3, T7, TP2, TP28 153 203 242 60 L 220 L A 40
Arsenical pesticides, solid, 6.1 UN2759 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 40
toxic
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
Arsenious acid, solid, see
Arsenic trioxide
Arsenious and mercuric iodide
solution, see Arsenic
compounds, liquid, n.o.s.
Arsine 2.3 UN2188 ..... 2.3, 2.1 1 None 192 245 Forbidden Forbidden D 40
Arsine, adsorbed 2.3 UN3522 ..... 2.3, 2.1 1 None 302c None Forbidden Forbidden D
Articles, explosive, extremely 1.6N UN0486 ..... 1.6N ....................... None 62 None Forbidden Forbidden 03 25
insensitive or Articles, EEI
G Articles, explosive, n.o.s. 1.4S UN0349 ..... 1.4S 101, 148, 382 None 62 None 25 kg 100 kg 01 25
G Articles, explosive, n.o.s. 1.4B UN0350 ..... 1.4B 101 None 62 None Forbidden Forbidden 05 25
G Articles, explosive, n.o.s. 1.4C UN0351 ..... 1.4C 101 None 62 None Forbidden 75 kg 02 25
G Articles, explosive, n.o.s. 1.4D UN0352 ..... 1.4D 101 None 62 None Forbidden 75 kg 02 25
G Articles, explosive, n.o.s. 1.4G UN0353 ..... 1.4G 101 None 62 None Forbidden 75 kg 02 25
G Articles, explosive, n.o.s. 1.1L UN0354 ..... 1.1L 101 None 62 None Forbidden Forbidden 02 25,
14E,
15E
G Articles, explosive, n.o.s. 1.2L UN0355 ..... 1.2L 101 None 62 None Forbidden Forbidden 05 25,
14E,
15E
G Articles, explosive, n.o.s. 1.3L UN0356 ..... 1.3L 101 None 62 None Forbidden Forbidden 05 25,
14E,
15E
G Articles, explosive, n.o.s. 1.1C UN0462 ..... 1.1C 101 None 62 None Forbidden Forbidden 04 25
G Articles, explosive, n.o.s. 1.1D UN0463 ..... 1.1D 101 None 62 None Forbidden Forbidden 04 25
G Articles, explosive, n.o.s. 1.1E UN0464 ..... 1.1E 101 None 62 None Forbidden Forbidden 04 25
G Articles, explosive, n.o.s. 1.1F UN0465 ..... 1.1F 101 None 62 None Forbidden Forbidden 05 25
G Articles, explosive, n.o.s. 1.2C UN0466 ..... 1.2C 101 None 62 None Forbidden Forbidden 04 25
G Articles, explosive, n.o.s. 1.2D UN0467 ..... 1.2D 101 None 62 None Forbidden Forbidden 04 25
G Articles, explosive, n.o.s. 1.2E UN0468 ..... 1.2E 101 None 62 None Forbidden Forbidden 04 25
[[Page 174]]
G Articles, explosive, n.o.s. 1.2F UN0469 ..... 1.2F 101 None 62 None Forbidden Forbidden 05 25
G Articles, explosive, n.o.s. 1.3C UN0470 ..... 1.3C 101 None 62 None Forbidden Forbidden 04 25
G Articles, explosive, n.o.s. 1.4E UN0471 ..... 1.4E 101 None 62 None Forbidden 75 kg 03 25
G Articles, explosive, n.o.s. 1.4F UN0472 ..... 1.4F 101 None 62 None Forbidden Forbidden 05 25
Articles, pressurized pneumatic 2.2 UN3164 ..... 2.2 371 306 302, 304 None No limit No limit A
or hydraulic containing non-
flammable gas
Articles, pyrophoric 1.2L UN0380 ..... 1.2L ....................... None 62 None Forbidden Forbidden 05 25,
14E,
15E,
17E
Articles, pyrotechnic for 1.1G UN0428 ..... 1.1G ....................... None 62 None Forbidden Forbidden 03 25
technical purposes
Articles, pyrotechnic for 1.2G UN0429 ..... 1.2G ....................... None 62 None Forbidden Forbidden 03 25
technical purposes
Articles, pyrotechnic for 1.3G UN0430 ..... 1.3G ....................... None 62 None Forbidden Forbidden 03 25
technical purposes
Articles, pyrotechnic for 1.4G UN0431 ..... 1.4G 381 None 62 None Forbidden 75 kg 02 25
technical purposes
Articles, pyrotechnic for 1.4S UN0432 ..... 1.4S ....................... None 62 None 25 kg 100 kg 01 25
technical purposes
D Asbestos 9 NA2212 III 9 156, IB8, IP2, IP4 155 216 216, 240 200 kg 200 kg A 34, 40
G I Asbestos, amphibole amosite, 9 UN2212 II 9 156, IB8, IP2, IP4, T3, 155 216 216, 240 Forbidden Forbidden A 34, 40
tremolite, actinolite, TP33
anthophyllite, or crocidolite
I Asbestos, chrysotile 9 UN2590 III 9 156, IB8, IP2, IP3, T1, 155 216 216, 240 200 kg 200 kg A 34, 40
TP33
Ascaridole (organic peroxide) Forbidden
D Asphalt, at or above its flash 3 NA1999 III 3 IB3, T1, TP3 150 203 247 Forbidden Forbidden D
point
D Asphalt, cut back, see Tars,
liquid, etc
Automobile, motorcycle,
tractor, other self-propelled
vehicle, engine, or other
mechanical apparatus, see
Vehicles or Battery etc
A, G Aviation regulated liquid, 9 UN3334 ..... 9 A35, A189 155 204 ........ 450 L 450 L A
n.o.s
[[Page 175]]
A, G Aviation regulated solid, n.o.s 9 UN3335 ..... 9 A35 155 204 ........ 400 kg 400 kg A
Azaurolic acid (salt of) (dry) Forbidden
Azido guanidine picrate (dry) Forbidden
5-Azido-1-hydroxy tetrazole Forbidden
Azido hydroxy tetrazole Forbidden
(mercury and silver salts)
3-Azido-1,2-Propylene glycol Forbidden
dinitrate
Azidodithiocarbonic acid Forbidden
Azidoethyl nitrate Forbidden
1-Aziridinylphosphine oxide-
(tris), see Tris-(1-
aziridinyl) phosphine oxide,
solution
Azodicarbonamide 4.1 UN3242 II 4.1 38, IB8, T3, TP33 151 223 240 Forbidden Forbidden D 2, 52,
53, 74
Azotetrazole (dry) Forbidden
Barium 4.3 UN1400 II 4.3 A19, IB7, IP2, IP21, 151 212 241 15 kg 50 kg E 13, 52,
T3, TP33, W31, W40 148
Barium alloys, pyrophoric 4.2 UN1854 I 4.2 T21, TP7, TP33, W31 None 181 None Forbidden Forbidden D 13, 148
Barium azide, dry or wetted 1.1A UN0224 ..... 1.1A, 111, 117 None 62 None Forbidden Forbidden 05 25
with less than 50 percent 6.1
water, by mass
Barium azide, wetted with not 4.1 UN1571 I 4.1, 6.1 162, A2, W31 None 182 None Forbidden 0.5 kg D 28, 36
less than 50 percent water, by
mass
Barium bromate 5.1 UN2719 II 5.1, 6.1 IB8, IP2, IP4, T3, TP33 152 212 242 5 kg 25 kg A 56, 58
Barium chlorate, solid 5.1 UN1445 II 5.1, 6.1 A9, IB6, IP2, N34, T3, 152 212 242 5 kg 25 kg A 56, 58
TP33
Barium chlorate, solution 5.1 UN3405 II 5.1, 6.1 A9, IB2, N34, T4, TP1 152 202 243 1 L 5 L A 56, 58,
133
............................... ......... ................ III 5.1, 6.1 A9, IB2, N34, T4, TP1 152 203 242 2.5 L 30 L A 56, 58,
133
G Barium compounds, n.o.s 6.1 UN1564 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Barium cyanide 6.1 UN1565 I 6.1 IB7, IP1, N74, N75, T6, None 211 242 5 kg 50 kg A 40, 52
TP33, W31
Barium hypochlorite with more 5.1 UN2741 II 5.1, 6.1 A7, A9, IB8, IP2, IP4, 152 212 None 5 kg 25 kg B 4, 52,
than 22 percent available N34, T3, TP33 56, 58,
chlorine 106
Barium nitrate 5.1 UN1446 II 5.1, 6.1 IB8, IP2, IP4, T3, TP33 152 212 242 5 kg 25 kg A
Barium oxide 6.1 UN1884 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Barium perchlorate, solid 5.1 UN1447 II 5.1, 6.1 IB6, IP2, T3, TP33 152 212 242 5 kg 25 kg A 56, 58
Barium perchlorate, solution 5.1 UN3406 II 5.1, 6.1 IB2, T4, TP1 152 202 243 1 L 5 L A 56, 58,
133
............................... ......... ................ III 5.1, 6.1 IB2, T4, TP1 152 203 242 2.5 L 30 L A 56, 58,
133
[[Page 176]]
Barium permanganate 5.1 UN1448 II 5.1, 6.1 IB6, IP2, T3, TP33 152 212 242 5 kg 25 kg D 56, 58,
138
Barium peroxide 5.1 UN1449 II 5.1, 6.1 A9, IB6, IP2, T3, TP33, 152 212 242 5 kg 25 kg C 13, 52,
W100 66, 75,
148
Barium selenate, see Selenates
or Selenites
Barium selenite, see Selenates
or Selenites
Batteries, containing sodium 4.3 UN3292 ..... 4.3 ....................... 189 189 189 Forbidden No limit A 13, 148
Batteries, dry, containing 8 UN3028 8 237 None 213 None 25 kg 230 kg A 52
potassium hydroxide solid,
electric storage
Batteries, dry, sealed, n.o.s. ......... ................ ..... ........ 130
W Batteries, nickel-metal hydride 9 UN3496 ..... 9 340 ............ .......... ........ .......... .......... A 25
see Batteries, dry, sealed,
n.o.s. for nickel-metal
hydride batteries transported
by modes other than vessel
Batteries, wet, filled with 8 UN2794 ..... 8 A51 159 159 159 30 kg No limit A 146
acid, electric storage
Batteries, wet, filled with 8 UN2795 ..... 8 A51 159 159 159 30 kg No limit A 52, 146
alkali, electric storage
Batteries, wet, non-spillable, 8 UN2800 ..... 8 ....................... 159a 159 159 No limit No limit A
electric storage
Battery fluid, acid 8 UN2796 II 8 A3, A7, B2, B15, IB2, 154 202 242 1 L 30 L B
N6, N34, T8, TP2
Battery fluid, alkali 8 UN2797 II 8 B2, IB2, N6, T7, TP2, 154 202 242 1 L 30 L A 29
TP28
Battery lithium type, see
Lithium batteries etc
Battery-powered vehicle or 9 UN3171 ..... 9 134 220 220 None No limit No limit A
Battery-powered equipment
Battery, wet, filled with acid
or alkali with vehicle or
mechanical equipment
containing an internal
combustion engine, see
Vehicle, etc. or Engines,
internal combustion, etc
[[Page 177]]
+ Benzaldehyde 9 UN1990 III 9 IB3, T2, TP1 155 203 241 100 L 220 L A
Benzene 3 UN1114 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B 40
Benzene diazonium chloride Forbidden
(dry)
Benzene diazonium nitrate (dry) Forbidden
Benzene phosphorus dichloride,
see Phenyl phosphorus
dichloride
Benzene phosphorus
thiodichloride, see Phenyl
phosphorus thiodichloride
Benzene sulfonyl chloride 8 UN2225 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A 40
Benzene triozonide Forbidden
Benzenethiol, see Phenyl
mercaptan
Benzidine 6.1 UN1885 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
1, 3, 2-Benzodioxaborole ......... ................ ..... ........ A210
Benzol, see Benzene
Benzonitrile 6.1 UN2224 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 40, 52
Benzoquinone 6.1 UN2587 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Benzotrichloride 8 UN2226 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L A 40
Benzotrifluoride 3 UN2338 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B 40
Benzoxidiazoles (dry) Forbidden
Benzoyl azide Forbidden
Benzoyl chloride 8 UN1736 II 8 B2, IB2, T8, TP2, TP13 154 202 242 1 L 30 L C 40
Benzyl bromide 6.1 UN1737 II 6.1, 8 A3, A7, IB2, N33, N34, None 202 243 1 L 30 L D 13, 40.
T8, TP2, TP13
Benzyl chloride 6.1 UN1738 II 6.1, 8 A3, A7, B70, IB2, N33, None 202 243 1 L 30 L D 13, 40.
N42, T8, TP2, TP13
Benzyl chloride unstabilized 6.1 UN1738 II 6.1, 8 A3, A7, B8, B11, IB2, 153 202 243 1 L 30 L D 13, 40
N33, N34, N43, T8, TP2,
TP13
Benzyl chloroformate 8 UN1739 I 8 A3, A6, B4, N41, T10, None 201 243 Forbidden 2.5 L D 40
TP2, TP13
Benzyl iodide 6.1 UN2653 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L B 12, 40
Benzyldimethylamine 8 UN2619 II 8, 3 B2, IB2, T7, TP2 154 202 243 1 L 30 L A 25, 40
Benzylidene chloride 6.1 UN1886 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L D 40
G Beryllium compounds, n.o.s 6.1 UN1566 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Beryllium nitrate 5.1 UN2464 II 5.1, 6.1 IB8, IP2, IP4, T3, TP33 152 212 242 5 kg 25 kg A
Beryllium, powder 6.1 UN1567 II 6.1, 4.1 IB8, IP2, IP4, T3, 153 212 242 15 kg 50 kg A 13,
TP33, W100 147,
148
Bicyclo [2,2,1] hepta-2,5- 3 UN2251 II 3 387, IB2, T7, TP2 150 202 242 5 L 60 L D 25
diene, stabilized or 2,5-
Norbornadiene, stabilized
Biological substance, Category 6.2 UN3373 ..... ........ A82 134 199 None 4 L or 4 4 L or 4 A 40
B kg kg
Biphenyl triozonide Forbidden
Bipyridilium pesticides, 3 UN2782 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L E
liquid, flammable, toxic,
flash point less than 23
degrees C
[[Page 178]]
............................... ......... ................ II 3, 6.1 IB2, T11, TP2, TP13, 150 202 243 1 L 60 L B 40
TP27
Bipyridilium pesticides, 6.1 UN3016 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
liquid, toxic
............................... ......... ................ II 6.1 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1 IB3, T7, TP2, TP28 153 203 241 60 L 220 L A 40
Bipyridilium pesticides, 6.1 UN3015 I 6.1, 3 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 21, 40
liquid, toxic, flammable,
flash point not less than 23
degrees C
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 21, 40
TP27
............................... ......... ................ III 6.1, 3 B1, IB3, T7, TP2, TP28 153 203 242 60 L 220 L A 21, 40
Bipyridilium pesticides, solid, 6.1 UN2781 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 40
toxic
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
Bis (Aminopropyl) piperazine,
see Corrosive liquid, n.o.s.
Bisulfate, aqueous solution 8 UN2837 II 8 A7, B2, IB2, N34, T7, 154 202 242 1 L 30 L A
TP2
............................... ......... ................ III 8 A7, IB3, N34, T4, TP1 154 203 241 5 L 60 L A
Bisulfites, aqueous solutions, 8 UN2693 III 8 IB3, T7, TP1, TP28 154 203 241 5 L 60 L A 40, 52
n.o.s.
Black powder, compressed or 1.1D UN0028 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
Gunpowder, compressed or Black
powder, in pellets or
Gunpowder, in pellets
Black powder or Gunpowder, 1.1D UN0027 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
granular or as a meal
D Black powder for small arms 4.1 NA0027 I 4.1 70 None 170 None Forbidden Forbidden E
Blasting agent, n.o.s., see
Explosives, blasting etc
Blasting cap assemblies, see
Detonator assemblies, non-
electric, for blasting
Blasting caps, electric, see
Detonators, electric for
blasting
Blasting caps, non-electric,
see Detonators, non-electric,
for blasting
[[Page 179]]
Bleaching powder, see Calcium
hypochlorite mixtures, etc
Bombs, photo-flash 1.1F UN0037 ..... 1.1F ....................... ............ 62 None Forbidden Forbidden 05 25
Bombs, photo-flash 1.1D UN0038 ..... 1.1D ....................... ............ 62 62 Forbidden Forbidden 04 25
Bombs, photo-flash 1.2G UN0039 ..... 1.2G ....................... ............ 62 62 Forbidden Forbidden 03 25
Bombs, photo-flash 1.3G UN0299 ..... 1.3G ....................... ............ 62 62 Forbidden Forbidden 03 25
Bombs, smoke, non-explosive, 8 UN2028 II 8 ....................... None 160 None Forbidden 50 kg E 40
with corrosive liquid, without
initiating device
Bombs, with bursting charge 1.1F UN0033 ..... 1.1F ....................... ............ 62 None Forbidden Forbidden 05 25
Bombs, with bursting charge 1.1D UN0034 ..... 1.1D ....................... ............ 62 62 Forbidden Forbidden 04 25
Bombs, with bursting charge 1.2D UN0035 ..... 1.2D ....................... ............ 62 62 Forbidden Forbidden 04 25
Bombs, with bursting charge 1.2F UN0291 ..... 1.2F ....................... ............ 62 None Forbidden Forbidden 05 25
Bombs with flammable liquid, 1.1J UN0399 ..... 1.1J ....................... ............ 62 None Forbidden Forbidden 05 25, 23E
with bursting charge
Bombs with flammable liquid, 1.2J UN0400 ..... 1.2J ....................... ............ 62 None Forbidden Forbidden 05 25, 23E
with bursting charge
Boosters with detonator 1.1B UN0225 ..... 1.1B ....................... None 62 None Forbidden Forbidden 05 25
Boosters with detonator 1.2B UN0268 ..... 1.2B ....................... None 62 None Forbidden Forbidden 05 25
Boosters, without detonator 1.1D UN0042 ..... 1.1D 148 None 62 None Forbidden Forbidden 04 25
Boosters, without detonator 1.2D UN0283 ..... 1.2D ....................... None 62 None Forbidden Forbidden 04 25
Borate and chlorate mixtures,
see Chlorate and borate
mixtures
Borneol 4.1 UN1312 III 4.1 A1, IB8, IP3, T1, TP33 None 213 240 25 kg 100 kg A
+ Boron tribromide 8 UN2692 I 8, 6.1 2, B9, B14, B32, N34, None 227 244 Forbidden Forbidden C 12, 25
T20, TP2, TP13, TP38,
TP45
Boron trichloride 2.3 UN1741 ..... 2.3, 8 3, B9, B14 None 304 314 Forbidden Forbidden D 25, 40
Boron trifluoride 2.3 UN1008 ..... 2.3, 8 2, 238, B9, B14 None 302 314, 315 Forbidden Forbidden D 40
Boron trifluoride acetic acid 8 UN1742 II 8 B2, B6, IB2, T8, TP2 154 202 242 1 L 30 L A
complex, liquid
Boron trifluoride acetic acid 8 UN3419 II 8 B2, B6, IB8, IP2, IP4, 154 212 240 15 kg 50 kg A
complex, solid T3, TP33
Boron trifluoride, adsorbed 2.3 UN3519 ..... 2.3, 8 2, B9, B14 None 302c None Forbidden Forbidden D 40
Boron trifluoride diethyl 8 UN2604 I 8, 3 A3, A19, T10, TP2, W31 None 201 243 0.5 L 2.5 L D 40
etherate
Boron trifluoride dihydrate 8 UN2851 II 8 IB2, T7, TP2 154 212 240 15 kg 50 kg B 12, 25,
40
Boron trifluoride dimethyl 4.3 UN2965 I 4.3, 8, A19, T10, TP2, TP7, None 201 243 Forbidden 1 L D 21, 25,
etherate 3 TP13, W31 40, 49,
100
Boron trifluoride propionic 8 UN1743 II 8 B2, IB2, T8, TP2 154 202 242 1 L 30 L A
acid complex, liquid
Boron trifluoride propionic 8 UN3420 II 8 B2, IB8, IP2, IP4, T3, 154 212 240 15 kg 50 kg A
acid complex, solid TP33
Box toe gum, see Nitrocellulose
etc
G Bromates, inorganic, aqueous 5.1 UN3213 II 5.1 350, IB2, T4, TP1 152 202 242 1 L 5 L B 56, 58,
solution, n.o.s 133
......... ................ III 5.1 350, IB2, T4, TP1 152 203 241 2.5 L 30 L B 56, 58,
133
[[Page 180]]
G Bromates, inorganic, n.o.s 5.1 UN1450 II 5.1 350, IB8, IP2, IP4, T3, 152 212 242 5 kg 25 kg A 56, 58
TP33
+ Bromine 8 UN1744 I 8, 6.1 1, B9, B85, N34, N43, None 226 249 Forbidden Forbidden D 12, 25,
T22, TP2, TP10, TP13 40, 66,
74, 89,
90
Bromine azide Forbidden
Bromine chloride 2.3 UN2901 ..... 2.3, 8, 2, B9, B14, N86 None 304 314, 315 Forbidden Forbidden D 40, 89,
5.1 90
+ Bromine pentafluoride 5.1 UN1745 I 5.1, 1, B9, B14, B30, T22, None 228 244 Forbidden Forbidden D 25, 40,
6.1, 8 TP2, TP13, TP38, TP44 66, 90
+ Bromine solutions 8 UN1744 I 8, 6.1 1, B9, B85, N34, N43, None 226 249 Forbidden Forbidden D 12, 25,
T22, TP2, TP10, TP13 40, 66,
74, 89,
90
+ Bromine solutions 8 UN1744 I 8, 6.1 2, B9, B85, N34, N43, None 227 249 Forbidden Forbidden D 12, 25,
T22, TP2, TP10, TP13 40, 66,
74, 89,
90
+ Bromine trifluoride 5.1 UN1746 I 5.1, 2, B9, B14, B32, T22, None 228 244 Forbidden Forbidden D 25, 40,
6.1, 8 TP2, TP13, TP38, TP45 66, 90
4-Bromo-1,2-dinitrobenzene Forbidden
4-Bromo-1,2-dinitrobenzene Forbidden
(unstable at 59 degrees C)
1-Bromo-3-chloropropane 6.1 UN2688 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
1-Bromo-3-methylbutane 3 UN2341 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
1-Bromo-3-nitrobenzene Forbidden
(unstable at 56 degrees C)
2-Bromo-2-nitropropane-1,3-diol 4.1 UN3241 III 4.1 46, IB8, IP3 151 213 None 25 kg 50 kg C 12, 25,
40
Bromoacetic acid, solid 8 UN3425 II 8 A7, IB8, IP2, IP4, N34, 154 212 240 15 kg 50 kg A
T3, TP33
Bromoacetic acid solution 8 UN1938 II 8 A7, B2, IB2, T7, TP2 154 202 242 1 L 30 L A 40
............................... ......... ................ III 8 B2, IB3, T7, TP2 154 203 241 5 L 60 L A 40
+ Bromoacetone 6.1 UN1569 II 6.1, 3 2, T20, TP2, TP13 None 193 245 Forbidden Forbidden D 40
Bromoacetyl bromide 8 UN2513 II 8 B2, IB2, T8, TP2 154 202 242 1 L 30 L C 40, 53
[[Page 181]]
Bromobenzene 3 UN2514 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Bromobenzyl cyanides, liquid 6.1 UN1694 I 6.1 T14, TP2, TP13, W31 None 201 243 Forbidden 30 L D 12, 25,
40, 52
Bromobenzyl cyanides, solid 6.1 UN3449 I 6.1 T6, TP33, W31 None 211 242 5 kg 50 kg D 12, 25,
40, 52
1-Bromobutane 3 UN1126 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B 40
2-Bromobutane 3 UN2339 II 3 B1, IB2, T4, TP1 150 202 242 5 L 60 L B 40
Bromochloromethane 6.1 UN1887 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
2-Bromoethyl ethyl ether 3 UN2340 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B 40
Bromoform 6.1 UN2515 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A 12, 25,
40
Bromomethylpropanes 3 UN2342 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
2-Bromopentane 3 UN2343 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Bromopropanes 3 UN2344 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B 40
............................... ......... ................ III 3 IB3, T2, TP1 150 203 242 60 L 220 L A
3-Bromopropyne 3 UN2345 II 3 IB2, T4, TP1 150 202 242 5 L 60 L D 40
Bromosilane Forbidden
Bromotoluene-alpha, see Benzyl
bromide
Bromotrifluoroethylene 2.1 UN2419 ..... 2.1 ....................... None 304 314, 315 Forbidden 150 kg B 40
Bromotrifluoromethane or 2.2 UN1009 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
Refrigerant gas, R 13B1.
Brucine 6.1 UN1570 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A
Bursters, explosive 1.1D UN0043 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
Butadienes, stabilized or 2.1 UN1010 ..... 2.1 387, T50 306 304 314, 315 Forbidden 150 kg B 25, 40
Butadienes and Hydrocarbon
mixture, stabilized containing
more than 40% butadienes
Butane see also Petroleum 2.1 UN1011 ..... 2.1 19, T50 306 304 314, 315 Forbidden 150 kg E 40
gases, liquefied
Butane, butane mixtures and
mixtures having similar
properties in cartridges each
not exceeding 500 grams, see
Receptacles, etc
Butanedione 3 UN2346 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
1,2,4-Butanetriol trinitrate Forbidden
Butanols 3 UN1120 II 3 IB2, T4, TP1, TP29 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
tert-Butoxycarbonyl azide Forbidden
Butyl acetates 3 UN1123 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Butyl acid phosphate 8 UN1718 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
Butyl acrylates, stabilized 3 UN2348 III 3 387, B1, IB3, T2, TP1 150 203 242 60 L 220 L C 25
Butyl alcohols, see Butanols
Butyl benzenes 3 UN2709 III 3 B1, IB3, T2, TP2 150 203 242 60 L 220 L A
n-Butyl bromide, see 1-
Bromobutane
n-Butyl chloride, see
Chlorobutanes
[[Page 182]]
n-Butyl chloroformate 6.1 UN2743 I 6.1, 8, 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden A 12, 13,
3 TP2, TP13, TP38, TP45 21, 25,
40, 100
Butyl ethers, see Dibutyl
ethers
Butyl ethyl ether, see Ethyl
butyl ether
n-Butyl formate 3 UN1128 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
tert-Butyl hydroperoxide, with Forbidden
more than 90 percent with
water
tert-Butyl hypochlorite 4.2 UN3255 I 4.2, 8 ....................... None 211 243 Forbidden Forbidden D 40
N-n-Butyl imidazole 6.1 UN2690 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
tert-Butyl isocyanate 6.1 UN2484 I 6.1, 3 1, B9, B14, B30, T20, None 226 244 Forbidden Forbidden D 40
TP2, TP13, TP38, TP44
n-Butyl isocyanate 6.1 UN2485 I 6.1, 3 2, B9, B14, B32, B77, None 227 244 Forbidden Forbidden D 40
T20, TP2, TP13, TP38,
TP45
Butyl mercaptan 3 UN2347 II 3 A3, A6, IB2, T4, TP1 150 202 242 5 L 60 L D 52, 95,
102
n-Butyl methacrylate, 3 UN2227 III 3 387, B1, IB3, T2, TP1 150 203 242 60 L 220 L C 25
stabilized
Butyl methyl ether 3 UN2350 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Butyl nitrites 3 UN2351 I 3 T11, TP1, TP8, TP27 150 201 243 1 L 30 L E 40
............................... ......... ................ II 3 IB2, T4, TP1 150 202 242 5 L 60 L B 40
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A 40
tert-Butyl peroxyacetate, with Forbidden
more than 76 percent in
solution
n-Butyl peroxydicarbonate, with Forbidden
more than 52 percent in
solution
tert-Butyl peroxyisobutyrate, Forbidden
with more than 77 percent in
solution
Butyl phosphoric acid, see
Butyl acid phosphate
Butyl propionates 3 UN1914 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
5-tert-Butyl-2,4,6-trinitro-m- 4.1 UN2956 III 4.1 159 None 223 None Forbidden Forbidden D 12, 25,
xylene or Musk xylene 40, 127
Butyl vinyl ether, stabilized 3 UN2352 II 3 387, IB2, T4, TP1 150 202 242 5 L 60 L C 25, 40
n-Butylamine 3 UN1125 II 3, 8 IB2, T7, TP1 150 202 242 1 L 5 L B 40
N-Butylaniline 6.1 UN2738 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 74
[[Page 183]]
tert- 6.1 UN2747 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A 12, 13,
Butylcyclohexylchloroformate 25
Butylene see also Petroleum 2.1 UN1012 ..... 2.1 19, T50 306 304 314, 315 Forbidden 150 kg E 40
gases, liquefied
1,2-Butylene oxide, stabilized 3 UN3022 II 3 387, IB2, T4, TP1 150 202 242 5 L 60 L C 25, 27,
49
Butyltoluenes 6.1 UN2667 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Butyltrichlorosilane 8 UN1747 II 8, 3 A7, B2, B6, N34, T10, None 206 243 Forbidden 30 L C 40
TP2, TP7, TP13
1,4-Butynediol 6.1 UN2716 III 6.1 A1, IB8, IP3, T1, TP33 None 213 240 100 kg 200 kg C 52, 53,
70
Butyraldehyde 3 UN1129 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Butyraldoxime 3 UN2840 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Butyric acid 8 UN2820 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A 12, 25
Butyric anhydride 8 UN2739 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
Butyronitrile 3 UN2411 II 3, 6.1 IB2, T7, TP1, TP13 150 202 243 1 L 60 L E 40
Butyryl chloride 3 UN2353 II 3, 8 IB2, T8, TP2, TP13 150 202 243 1 L 5 L C 40
Cacodylic acid 6.1 UN1572 II 6.1 IB8, IP2, IP4,T3, TP33 153 212 242 25 kg 100 kg E 52
G Cadmium compounds 6.1 UN2570 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A
......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Caesium hydroxide 8 UN2682 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A 29, 52.
Caesium hydroxide solution 8 UN2681 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L A 29, 52
III 8 IB3, T4, TP1 154 203 241 5 L 60 L A 29, 52
Calcium 4.3 UN1401 II 4.3 IB7, IP2, IP21, T3, 151 212 241 15 kg 50kg E 13, 52,
TP33, W31, W40 148
Calcium arsenate 6.1 UN1573 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Calcium arsenate and calcium 6.1 UN1574 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
arsenite, mixtures, solid
Calcium bisulfite solution, see
Bisulfites, aqueous solutions,
n.o.s.
Calcium carbide 4.3 UN1402 I 4.3 A1, A8, B55, B59, IB4, None 211 242 Forbidden 15 kg B 13, 52,
IP1, N34, T9, TP7, 148
TP33, W32
......... II 4.3 A1, A8, B55, B59, IB7, 151 212 241 15 kg 50 kg B 13, 52,
IP2, IP21, N34, T3, 148
TP33, W31, W40
Calcium chlorate 5.1 UN1452 II 5.1 A9, IB8, IP2, IP4, N34, 152 212 242 5 kg 25 kg A 56, 58
T3, TP33
Calcium chlorate aqueous 5.1 UN2429 II 5.1 A2, IB2, N41, T4, TP1 152 202 242 1 L 5 L B 56, 58,
solution 133
............................... ......... ................ III 5.1 A2, IB2, N41, T4, TP1 152 203 241 2.5 L 30 L B 56, 68,
133
Calcium chlorite 5.1 UN1453 II 5.1 A9, IB8, IP2, IP4, N34, 152 212 242 5 kg 25 kg A 56, 58
T3, TP33
Calcium cyanamide with more 4.3 UN1403 III 4.3 A1, A19, IB8, IP4, T1, 151 213 241 25 kg 100 kg A 13, 52,
than 0.1 percent of calcium TP33, W31, W40 148
carbide
Calcium cyanide 6.1 UN1575 I 6.1 IB7, IP1, N79, N80, T6, None 211 242 5 kg 50 kg A 40, 52
TP33, W31
[[Page 184]]
Calcium dithionite or Calcium 4.2 UN1923 II 4.2 A19, A20, IB6, IP2, T3, None 212 241 15 kg 50 kg E 13
hydrosulfite TP33, W31
Calcium hydride 4.3 UN1404 I 4.3 A19, N40, W32 None 211 242 Forbidden 15 kg E 13, 52,
148
Calcium hydrosulfite, see
Calcium dithionite
Calcium hypochlorite, dry, 5.1 UN3485 II 5.1, 8 165, 166, A7, A9, IB8, 152 212 None 5 kg 25 kg D 4, 25,
corrosive or Calcium IP2, IP4, IP13, N34, W9 52, 56,
hypochlorite mixture, dry, 58, 69,
corrosive with more than 39% 142
available chlorine (8.8%
available oxygen)
Calcium hypochlorite, dry or 5.1 UN1748 II 5.1 165, 166, A7, A9, IB8, 152 212 None 5 kg 25 kg D 4, 25,
Calcium hypochlorite mixture IP2, IP4, IP13, N34, W9 52, 56,
dry with more than 39% 58, 69,
available chlorine (8.8% 142
available oxygen)
III 5.1 165, 171, A7, A9, IB8, 152 213 240 25 kg 100 kg D 4, 25,
IP4, IP13, N34, W9 52, 56,
58, 69,
142
Calcium hypochlorite, hydrated, 5.1 UN3487 II 5.1, 8 165, IB8, IP2, IP4, 152 212 240 5 kg 25 kg D 4, 25,
corrosive or Calcium IP13, W9 52, 56,
hypochlorite, hydrated 58, 69,
mixture, corrosive with not 142
less than 5.5% but not more
than 16% water
III 5.1, 8 165, IB8, IP4, W9 152 213 240 25 kg 100 kg D 4, 25,
52, 56,
58, 69,
142
Calcium hypochlorite, hydrated 5.1 UN2880 II 5.1 165, IB8, IP2, IP4, 152 212 240 5 kg 25 kg D 4, 25,
or Calcium hypochlorite, IP13, W9 52, 56,
hydrated mixture, with not 58, 69,
less than 5.5% but not more 142
than 16% water
III 5.1 165, 171, IB8, IP4, 152 213 240 25 kg 100 kg D 4, 25,
IP13, W9 52, 56,
58, 69,
142
[[Page 185]]
Calcium hypochlorite mixture, 5.1 UN3486 III 5.1, 8 165, A1, A29, IB8, IP3, 152 213 240 5 kg 25 kg D 4, 25,
dry, corrosive with more than IP13, N34, W9, W10 52, 56,
10% but not more than 39% 58, 69,
available chlorine 142
Calcium hypochlorite mixture, 5.1 UN2208 III 5.1 165, A1, A29, IB8, IP3, 152 213 240 25 kg 100 kg D 4, 25,
dry, with more than 10% but IP13, N34, W9, W10 52, 56,
not more than 39% available 58, 69,
chlorine 142
Calcium manganese silicon 4.3 UN2844 III 4.3 A1, A19, IB8, IP4, T1, 151 213 241 25 kg 100 kg A 13, 52,
TP33, W31 85,
103,
148
Calcium nitrate 5.1 UN1454 III 5.1 34, B120, IB8, IP3, T1, 152 213 240 25 kg 100 kg A .......
TP33
A Calcium oxide 8 UN1910 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
Calcium perchlorate 5.1 UN1455 II 5.1 IB6, IP2, T3, TP33 152 212 242 5 kg 25 kg A 56, 58
Calcium permanganate 5.1 UN1456 II 5.1 IB6, IP2, T3, TP33 152 212 242 5 kg 25 kg D 56, 58,
138
Calcium peroxide 5.1 UN1457 II 5.1 IB6, IP2, T3, TP33, 152 212 242 5 kg 25 kg C 13, 52,
W100 66, 75,
148
Calcium phosphide 4.3 UN1360 I 4.3, 6.1 A8, A19, N40, W32 None 211 242 Forbidden 15 kg E 13, 40,
52, 85,
148
Calcium, pyrophoric or Calcium 4.2 UN1855 I 4.2 W31 None 187 None Forbidden Forbidden D 13, 148
alloys, pyrophoric
Calcium resinate 4.1 UN1313 III 4.1 A1, A19, IB6, T1, TP33 None 213 240 25 kg 100 kg A
Calcium resinate, fused 4.1 UN1314 III 4.1 A1, A19, IB4, T1, TP33 None 213 240 25 kg 100 kg A
Calcium selenate, see Selenates
or Selenites
Calcium silicide 4.3 UN1405 II 4.3 A19, IB7, IP2, IP21, 151 212 241 15 kg 50 kg B 13, 52,
T3, TP33, W31 85,
103,
148
......... III 4.3 A1, A19, IB8, IP21, T1, 151 213 241 25 kg 100 kg B 13, 52,
TP33, W31, W40 85,
103,
148
Camphor oil 3 UN1130 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Camphor, synthetic 4.1 UN2717 III 4.1 A1, IB8, IP3, T1, TP33 None 213 240 25 kg 100 kg A
Cannon primers, see Primers,
tubular
Capacitor, asymmetric with an 9 UN3508 ..... 9 372 176 176 176 No limit No Limit A
energy storage capacity
greater than 0.3 Wh
Capacitor, electric double 9 UN3499 ..... 9 361 176 176 176 No limit No limit A
layer with an energy storage
capacity greater than 0.3 Wh
Caproic acid 8 UN2829 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
Caps, blasting, see Detonators,
etc
[[Page 186]]
Carbamate pesticides, liquid, 3 UN2758 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L B 40
flammable, toxic, flash point
less than 23 degrees C
............................... ......... ................ II 3, 6.1 IB2, T11, TP2, TP13, 150 202 243 1 L 60 L B 40
TP27
Carbamate pesticides, liquid, 6.1 UN2992 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
toxic
............................... ......... ................ II 6.1 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1 IB3, T7, TP2, TP28 153 203 241 60 L 220 L A 40
Carbamate pesticides, liquid, 6.1 UN2991 I 6.1, 3 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
toxic, flammable, flash point
not less than 23 degrees C
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1, 3 B1, IB3, T7, TP2, TP28 153 203 242 60 L 220 L A 40
Carbamate pesticides, solid, 6.1 UN2757 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 40
toxic
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
Carbolic acid, see Phenol,
solid or Phenol, molten
Carbolic acid solutions, see
Phenol solutions
I Carbon, activated 4.2 UN1362 III 4.2 IB8, IP3, T1, TP33, W31 None 213 241 0.5 kg 0.5 kg A 12, 25
I Carbon, animal or vegetable 4.2 UN1361 II 4.2 IB6, T3, TP33 None 212 242 Forbidden Forbidden A 12, 25
origin
III 4.2 IB8, IP3, T1, TP33 None 213 241 Forbidden Forbidden A 12, 25
Carbon bisulfide, see Carbon
disulfide
Carbon dioxide 2.2 UN1013 ..... 2.2 ....................... 306 302, 304 302, 75 kg 150 kg A
314,
315
Carbon dioxide, refrigerated 2.2 UN2187 ..... 2.2 T75, TP5 306 304 314, 315 50 kg 500 kg D
liquid
A W Carbon dioxide, solid or Dry 9 UN1845 ..... None ....................... 217 217 240 200 kg 200 kg C 40
ice
Carbon disulfide 3 UN1131 I 3, 6.1 B16, T14, TP2, TP7, None 201 243 Forbidden Forbidden D 40, 78,
TP13, W31 115
Carbon monoxide, compressed 2.3 UN1016 ..... 2.3, 2.1 4 None 302 314, 315 Forbidden 25 kg D 40
[[Page 187]]
D Carbon monoxide, refrigerated 2.3 NA9202 ..... 2.3, 2.1 4, T75, TP5 None 316 318 Forbidden Forbidden D
liquid (cryogenic liquid)
Carbon tetrabromide 6.1 UN2516 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 25
Carbon tetrachloride 6.1 UN1846 II 6.1 IB2, N36, T7, TP2 153 202 243 5 L 60 L A 40
Carbonyl chloride, see Phosgene
Carbonyl fluoride 2.3 UN2417 ..... 2.3, 8 2 None 302 None Forbidden Forbidden D 40
Carbonyl sulfide 2.3 UN2204 ..... 2.3, 2.1 3, B14 None 304 314, 315 Forbidden Forbidden D 40
Cartridge cases, empty primed,
see Cases, cartridge, empty,
with primer
Cartridges, actuating, for
aircraft ejector seat
catapult, fire extinguisher,
canopy removal or apparatus,
see Cartridges, power device
Cartridges, explosive, see
Charges, demolition
Cartridges, sporting, see
Cartridges for weapons, inert
projectile, or Cartridges,
small arms
Cartridges, flash 1.1G UN0049 ..... 1.1G ....................... None 62 None Forbidden Forbidden 03 25
Cartridges, flash 1.3G UN0050 ..... 1.3G ....................... None 62 None Forbidden 75 kg 03 25
Cartridges for weapons, blank 1.1C UN0326 ..... 1.1C ....................... None 62 None Forbidden Forbidden 04 25
Cartridges for weapons, blank 1.2C UN0413 ..... 1.2C ....................... None 62 None Forbidden Forbidden 04 25
Cartridges for weapons, blank 1.3C UN0327 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25
or Cartridges, small arms,
blank
Cartridges for weapons, blank 1.4C UN0338 ..... 1.4C ....................... None 62 None Forbidden 75 kg 02 25
or Cartridges, small arms,
blank
Cartridges for weapons, blank 1.4S UN0014 ..... None ....................... 63 62 None 25 kg 100 kg 01 25
or Cartridges, small arms,
blank or Cartridges for tools,
blank
Cartridges for weapons, inert 1.2C UN0328 ..... 1.2C ....................... None 62 62 Forbidden Forbidden 04 25
projectile
Cartridges for weapons, inert 1.4S UN0012 ..... None ....................... 63 62 None 25 kg 100 kg 01 25
projectile or Cartridges,
small arms
Cartridges for weapons, inert 1.4C UN0339 ..... 1.4C ....................... None 62 None Forbidden 75 kg 02 25
projectile or Cartridges,
small arms
Cartridges for weapons, inert 1.3C UN0417 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25
projectile or Cartridges,
small arms
Cartridges for weapons, with 1.1F UN0005 ..... 1.1F ....................... None 62 None Forbidden Forbidden 05 25
bursting charge
Cartridges for weapons, with 1.1E UN0006 ..... 1.1E ....................... None 62 62 Forbidden Forbidden 04 25
bursting charge
Cartridges for weapons, with 1.2F UN0007 ..... 1.2F ....................... None 62 None Forbidden Forbidden 05 25
bursting charge
Cartridges for weapons, with 1.2E UN0321 ..... 1.2E ....................... None 62 62 Forbidden Forbidden 04 25
bursting charge
Cartridges for weapons, with 1.4F UN0348 ..... 1.4F ....................... None 62 None Forbidden Forbidden 05 25
bursting charge
[[Page 188]]
Cartridges for weapons, with 1.4E UN0412 ..... 1.4E ....................... None 62 62 Forbidden 75 kg 03 25
bursting charge
Cartridges, oil well 1.3C UN0277 ..... 1.3C ....................... None 62 62 Forbidden Forbidden 04 25
Cartridges, oil well 1.4C UN0278 ..... 1.4C ....................... None 62 62 Forbidden 75 kg 02 25
Cartridges, power device 1.3C UN0275 ..... 1.3C ....................... None 62 62 Forbidden 75 kg 04 25
Cartridges, power device 1.4C UN0276 ..... 1.4C 110 None 62 62 Forbidden 75 kg 02 25
Cartridges, power device 1.4S UN0323 ..... 1.4S 110, 347 63 62 62 25 kg 100 kg 01 25
Cartridges, power device 1.2C UN0381 ..... 1.2C ....................... None 62 62 Forbidden Forbidden 04 25
D Cartridges power device (used ORM-D ................ ..... None 222 63 None None 30 kg Forbidden A
to project fastening devices) gross
Cartridges, safety, blank, see
Cartridges for weapons, blank
(UN 0014)
Cartridges, safety, see ......... ................ ..... ........ ....................... ............ .......... ........ .......... .......... .......... .......
Cartriges for weapons, inert
projectile, or Cartridges,
small arms or Cartridges,
power device (UN 0323)
Cartridges, signal 1.3G UN0054 ..... 1.3G ....................... None 62 None Forbidden 75 kg 03 25
Cartridges, signal 1.4G UN0312 ..... 1.4G ....................... None 62 None Forbidden 75 kg 02 25
Cartridges, signal 1.4S UN0405 ..... 1.4S ....................... None 62 None 25 kg 100 kg 01 25
D Cartridges, small arms ORM-D ................ ..... None 222 63 None None 30 kg Forbidden A
gross
Cartridges, starter, jet
engine, see Cartridges, power
device
Cases, cartridge, empty with 1.4S UN0055 ..... 1.4S 50 63 62 None 25 kg 100 kg 01 25
primer
Cases, cartridges, empty with 1.4C UN0379 ..... 1.4C 50 None 62 None Forbidden 75 kg 02 25
primer
Cases, combustible, empty, 1.4C UN0446 ..... 1.4C ....................... None 62 None Forbidden 75 kg 02 25
without primer
Cases, combustible, empty, 1.3C UN0447 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25
without primer
Casinghead gasoline see
Gasoline
A W Castor beans or Castor meal or 9 UN2969 II None IB8, IP2, IP4, T3, TP33 155 204 240 No limit No limit E 34, 40,
Castor pomace or Castor flake 44, 122
Catecholborane ......... ................ ..... ........ A210
G Caustic alkali liquids, n.o.s. 8 UN1719 II 8 B2, IB2, T11, TP2, TP27 154 202 242 1 L 30 L A 29, 52
............................... ......... ................ III 8 IB3, T7, TP1, TP28 154 203 241 5 L 60 L A 29, 52
[[Page 189]]
Caustic potash, see Potassium
hydroxide etc
Caustic soda, (etc.) see Sodium
hydroxide etc
Cells, containing sodium 4.3 UN3292 ..... 4.3 189 189 189 25 kg No limit A
Celluloid, in block, rods, 4.1 UN2000 III 4.1 420 None 213 240 25 kg 100 kg A
rolls, sheets, tubes, etc.,
except scrap
Celluloid, scrap 4.2 UN2002 III 4.2 IB8, IP3 None 213 241 Forbidden Forbidden D
Cement, see Adhesives
containing flammable liquid
Cerium, slabs, ingots, or rods 4.1 UN1333 II 4.1 IB8, IP2, IP4, N34, None 212 240 15 kg 50 kg A 13, 74,
W100 91,
147,
148
Cerium, turnings or gritty 4.3 UN3078 II 4.3 A1, IB7, IP2, IP21, T3, 151 212 242 15 kg 50 kg E 13, 52,
powder TP33, W31, W40 148
Cesium or Caesium 4.3 UN1407 I 4.3 A7, A19, IB4, IP1, N34, None 211 242 Forbidden 15 kg D 13, 52,
N40, W32 148
Cesium nitrate or Caesium 5.1 UN1451 III 5.1 A1, A29, IB8, IP3, T1, 152 213 240 25 kg 100 kg A
nitrate TP33
D Charcoal briquettes, shell, 4.2 NA1361 III 4.2 IB8, T1, TP33 151 213 240 25 kg 100 kg A 12
screenings, wood, etc.
Charges, bursting, plastics 1.1D UN0457 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
bonded
Charges, bursting, plastics 1.2D UN0458 ..... 1.2D ....................... None 62 None Forbidden Forbidden 04 25
bonded
Charges, bursting, plastics 1.4D UN0459 ..... 1.4D ....................... None 62 None Forbidden 75 kg 02 25
bonded
Charges, bursting, plastics 1.4S UN0460 ..... 1.4S 347 None 62 None 25 kg 100 kg 01 25
bonded
Charges, demolition 1.1D UN0048 ..... 1.1D ....................... None 62 62 Forbidden Forbidden 04 25
Charges, depth 1.1D UN0056 ..... 1.1D ....................... None 62 62 Forbidden Forbidden 04 25
Charges, expelling, explosive,
for fire extinguishers, see
Cartridges, power device
Charges, explosive, commercial 1.1D UN0442 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
without detonator
Charges, explosive, commercial 1.2D UN0443 ..... 1.2D ....................... None 62 None Forbidden Forbidden 04 25
without detonator
Charges, explosive, commercial 1.4D UN0444 ..... 1.4D ....................... None 62 None Forbidden 75 kg 02 25
without detonator
Charges, explosive, commercial 1.4S UN0445 ..... 1.4S 347 None 62 None 25 kg 100 kg 01 25
without detonator
Charges, propelling 1.1C UN0271 ..... 1.1C ....................... None 62 None Forbidden Forbidden 04 25
Charges, propelling 1.3C UN0272 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25
Charges, propelling 1.2C UN0415 ..... 1.2C ....................... None 62 None Forbidden Forbidden 04 25
Charges, propelling 1.4C UN0491 ..... 1.4C ....................... None 62 None Forbidden 75 kg 02 25
Charges, propelling, for cannon 1.3C UN0242 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25
Charges, propelling, for cannon 1.1C UN0279 ..... 1.1C ....................... None 62 None Forbidden Forbidden 04 25
Charges, propelling, for cannon 1.2C UN0414 ..... 1.2C ....................... None 62 None Forbidden Forbidden 04 25
Charges, shaped, flexible, 1.4D UN0237 ..... 1.4D ....................... None 62 None Forbidden 75 kg 02 25
linear
Charges, shaped, flexible, 1.1D UN0288 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
linear
Charges, shaped, without 1.1D UN0059 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
detonator
Charges, shaped, without 1.2D UN0439 ..... 1.2D ....................... None 62 None Forbidden Forbidden 04 25
detonator
[[Page 190]]
Charges, shaped, without 1.4D UN0440 ..... 1.4D ....................... None 62 None Forbidden 75 kg 02 25
detonator
Charges, shaped, without 1.4S UN0441 ..... 1.4S 347 None 62 None 25 kg 100 kg 01 25
detonator
Charges, supplementary 1.1D UN0060 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
explosive
D Chemical kit 8 NA1760 II 8 ....................... 154 161 None 1 L 30 L B 40
Chemical kits 9 UN3316 II 9 15 161 161 None 10 kg 10 kg A
III 9 15 161 161 None 10 kg 10 kg A
G Chemical under pressure, 2.2 UN3503 ..... 2.2, 8 362, T50, TP40 None 335 313, 315 Forbidden 100 kg D 40
corrosive, n.o.s
G Chemical under pressure, 2.1 UN3505 ..... 2.1, 8 362, T50, TP40 None 335 313, 315 Forbidden 75 kg D 40
flammable, corrosive, n.o.s
G Chemical under pressure, 2.1 UN3501 ..... 2.1 362, T50, TP40 None 335 313, 315 Forbidden 75 kg D 40
flammable, n.o.s
G Chemical under pressure, 2.1 UN3504 ..... 2.1, 6.1 362, T50, TP40 None 335 313, 315 Forbidden 75 kg D 40
flammable, toxic, n.o.s
G Chemical under pressure, n.o.s 2.2 UN3500 ..... 2.2 362, T50, TP40 None 335 313, 315 75 kg 150 kg B
G Chemical under pressure, toxic, 2.2 UN3502 ..... 2.2, 6.1 362, T50, TP40 None 335 313, 315 Forbidden 100 kg D 40
n.o.s
Chloral, anhydrous, stabilized 6.1 UN2075 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L D 40
Chlorate and borate mixtures 5.1 UN1458 II 5.1 A9, IB8, IP2, IP4, N34, 152 212 240 5 kg 25 kg A 56, 58
T3, TP33
............................... ......... ................ III 5.1 A9, IB8, IP3, N34, T1, 152 213 240 25 kg 100 kg A 56, 58
TP33
Chlorate and magnesium chloride 5.1 UN1459 II 5.1 A9, IB8, IP2, IP4, N34, 152 212 240 5 kg 25 kg A 56, 58
mixture solid T3, TP33
III 5.1 A9, IB8, IP3, N34, T1, 152 213 240 25 kg 100 kg A 56, 58
TP33
Chlorate and magnesium chloride 5.1 UN3407 II 5.1 A9, IB2, N34, T4, TP1 152 202 242 1 L 5 L A 56, 58,
mixture solution 133
............................... ......... ................ III 5.1 A9, IB2, N34, T4, TP1 152 203 241 2.5 L 30 L A 56, 58,
133
Chlorate of potash, see ......... ................ ..... ........ ....................... ............ .......... ........ .......... .......... .......... .......
Potassium chlorate
Chlorate of soda, see Sodium
chlorate
G Chlorates, inorganic, aqueous 5.1 UN3210 II 5.1 351, IB2, T4, TP1 152 202 242 1 L 5 L B 56, 58,
solution, n.o.s 133
[[Page 191]]
......... ................ III 5.1 351, IB2, T4, TP1 152 203 241 2.5 L 30 L B 56, 58,
133
G Chlorates, inorganic, n.o.s 5.1 UN1461 II 5.1 351, A9, IB6, IP2, N34, 152 212 242 5 kg 25 kg A 56, 58
T3, TP33
Chloric acid aqueous solution, 5.1 UN2626 II 5.1 IB2, T4, TP1, W31 None 229 None Forbidden Forbidden D 56, 58
with not more than 10 percent
chloric acid
Chloride of phosphorus, see
Phosphorus trichloride
Chloride of sulfur, see Sulfur
chloride
Chlorinated lime, see Calcium
hypochlorite mixtures, etc
Chlorine 2.3 UN1017 ..... 2.3, 2, B9, B14, N86, T50, None 304 314, 315 Forbidden Forbidden D 40, 51,
5.1, 8 TP19 55, 62,
68, 89,
90
Chlorine, adsorbed 2.3 UN3520 ..... 2.3, 2, B9, B14, N86 None 302c None Forbidden Forbidden D 40, 89,
5.1, 8 90
Chlorine azide Forbidden
D Chlorine dioxide, hydrate, 5.1 NA9191 II 5.1, 6.1 ....................... None 229 None Forbidden Forbidden E
frozen
Chlorine dioxide (not hydrate) Forbidden
Chlorine pentafluoride 2.3 UN2548 ..... 2.3, 1, B7, B9, B14, N86 None 304 314 Forbidden Forbidden D 40, 89,
5.1, 8 90
Chlorine trifluoride 2.3 UN1749 ..... 2.3, 2, B7, B9, B14, N86 None 304 314 Forbidden Forbidden D 40, 89,
5.1, 8 90
Chlorite solution 8 UN1908 II 8 A3, A6, A7, B2, IB2, 154 202 242 1 L 30 L B 26, 44,
N34, T7, TP2, TP24 89,
100,
141
............................... ......... ................ III 8 A3, A6, A7, B2, IB3, 154 203 241 5 L 60 L B 26, 44,
N34, T4, TP2, TP24 89,
100,
141
G Chlorites, inorganic, n.o.s 5.1 UN1462 II 5.1 352, A7, IB6, IP2, N34, 152 212 242 5 kg 25 kg A 56, 58
T3, TP33
1-Chloro-1,1-difluoroethane or 2.1 UN2517 ..... 2.1 T50 306 304 314, 315 Forbidden 150 kg B 40
Refrigerant gas R 142b
3-Chloro-4-methylphenyl 6.1 UN2236 II 6.1 IB2 153 202 243 5 L 60 L B 40
isocyanate, liquid
3-Chloro-4-methylphenyl 6.1 UN3428 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B 40
isocyanate, solid
1-Chloro-1,2,2,2- 2.2 UN1021 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
tetrafluoroethaneor
Refrigerant gas R 124
4-Chloro-o-toluidine 6.1 UN1579 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
hydrochloride, solid
[[Page 192]]
4-Chloro-o-toluidine 6.1 UN3410 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
hydrochloride, solution
1-Chloro-2,2,2-trifluoroethane 2.2 UN1983 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
or Refrigerant gas R 133a
Chloroacetic acid, molten 6.1 UN3250 II 6.1, 8 IB1, T7, TP3, TP28 None 202 243 Forbidden Forbidden C 40
Chloroacetic acid, solid 6.1 UN1751 II 6.1, 8 A3, A7, IB8, IP2, IP4, 153 212 242 15 kg 50 kg C 40
N34, T3, TP33
Chloroacetic acid, solution 6.1 UN1750 II 6.1, 8 A7, IB2, N34, T7, TP2 153 202 243 1 L 30 L C 40
Chloroacetone, stabilized 6.1 UN1695 I 6.1, 3, 2, B9, B14, B32, N12, None 227 244 Forbidden Forbidden D 21, 40,
8 N32, N34, T20, TP2, 100
TP13, TP38, TP45
Chloroacetone (unstabilized) Forbidden
+ Chloroacetonitrile 6.1 UN2668 I 6.1, 3 2, B9, B14, B32, IB9, None 227 244 Forbidden Forbidden A 12, 25,
T20, TP2, TP13, TP38, 40, 52
TP45
Chloroacetophenone, liquid, 6.1 UN3416 II 6.1 A3, IB2, N12, N32, N33, None 202 243 Forbidden 60 L D 12, 25,
(CN) T7, TP2, TP13 40
Chloroacetophenone, solid, (CN) 6.1 UN1697 II 6.1 A3, IB8, IP2, IP4, N12, None 212 None Forbidden 100 kg D 12, 25,
N32, N33, N34, T3, TP2, 40
TP13, TP33
Chloroacetyl chloride 6.1 UN1752 I 6.1, 8 2, B3, B8, B9, B14, None 227 244 Forbidden Forbidden D 40
B32, B77, N34, N43,
T20, TP2, TP13, TP38,
TP45
Chloroanilines, liquid 6.1 UN2019 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 52
Chloroanilines, solid 6.1 UN2018 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Chloroanisidines 6.1 UN2233 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Chlorobenzene 3 UN1134 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Chlorobenzol, see Chlorobenzene
Chlorobenzotrifluorides 3 UN2234 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A 40
Chlorobenzyl chlorides, liquid 6.1 UN2235 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Chlorobenzyl chlorides, solid 6.1 UN3427 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Chlorobutanes 3 UN1127 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Chlorocresols solution 6.1 UN2669 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 12, 25
III 6.1 IB3, T7, TP2 153 203 241 60 L 220 L A 12, 25
Chlorocresols, solid 6.1 UN3437 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 12, 25
Chlorodifluorobromomethane or 2.2 UN1974 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
Refrigerant gas R 12B1
[[Page 193]]
Chlorodifluoromethane and 2.2 UN1973 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
chloropentafluoroethane
mixture or Refrigerant gas R
502 with fixed boiling point,
with approximately 49 percent
chlorodifluoromethane
Chlorodifluoromethane or 2.2 UN1018 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
Refrigerant gas R 22
+ Chlorodinitrobenzenes, liquid. 6.1 UN1577 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L B 91
+ Chlorodinitrobenzenes, solid 6.1 UN3441 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 91
2-Chloroethanal 6.1 UN2232 I 6.1 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40
TP2, TP13, TP38, TP45
Chloroform 6.1 UN1888 III 6.1 IB3, N36, T7, TP2 153 203 241 60 L 220 L A 40
G Chloroformates, toxic, 6.1 UN2742 II 6.1, 8, 5, IB1, T7, TP2 153 202 243 1 L 30 L A 12, 13,
corrosive, flammable, n.o.s. 3 21, 25,
40, 100
G Chloroformates, toxic, 6.1 UN3277 II 6.1, 8 IB2, T8, TP2, TP13, 153 202 243 1 L 30 L A 12, 13,
corrosive, n.o.s. TP28 25, 40
Chloromethyl chloroformate 6.1 UN2745 II 6.1, 8 IB2, T7, TP2, TP13 153 202 243 1 L 30 L A 12, 13,
25, 40
Chloromethyl ethyl ether 3 UN2354 II 3, 6.1 IB2, T7, TP1, TP13 150 202 243 1 L 60 L E 40
Chloronitroanilines 6.1 UN2237 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
+ Chloronitrobenzenes, liquid 6.1 UN3409 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 44, 89,
100,
141
+ Chloronitrobenzenes, solid 6.1 UN1578 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Chloronitrotoluenes, liquid 6.1 UN2433 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A 44, 89,
100,
141
Chloronitrotoluenes, solid 6.1 UN3457 III 6.1 IB8, IP3,T1, TP33 153 213 240 25 kg 200 kg A
Chloropentafluoroethane or 2.2 UN1020 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
Refrigerant gas R 115
Chlorophenolates, liquid or 8 UN2904 III 8 IB3 154 203 241 5 L 60 L A
Phenolates, liquid
Chlorophenolates, solid or 8 UN2905 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
Phenolates, solid
Chlorophenols, liquid 6.1 UN2021 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Chlorophenols, solid 6.1 UN2020 III 6.1 IB8, IP3, T1, TP1, TP33 153 213 240 100 kg 200 kg A
Chlorophenyltrichlorosilane 8 UN1753 II 8 A7, B2, B6, N34, T10, None 206 242 Forbidden 30 L C 40
TP2, TP7
+ Chloropicrin 6.1 UN1580 I 6.1 2, B7, B9, B14, B32, None 227 244 Forbidden Forbidden D 40
B46, T22, TP2, TP13,
TP38, TP45
Chloropicrin and methyl bromide 2.3 UN1581 ..... 2.3 2, B9, B14, N86, T50 None 193 314, 315 Forbidden Forbidden D 25, 40
mixtures
Chloropicrin and methyl 2.3 UN1582 ..... 2.3 2, N86, T50 None 193 245 Forbidden Forbidden D 25, 40
chloride mixtures
[[Page 194]]
Chloropicrin mixture, flammable
(pressure not exceeding 14.7
psia at 115 degrees F flash
point below 100 degrees F) see
Toxic liquids, flammable, etc
G Chloropicrin mixtures, n.o.s 6.1 UN1583 I 6.1 5 None 201 243 Forbidden Forbidden C 40
......... ................ II 6.1 IB2 153 202 243 Forbidden Forbidden C 40
......... ................ III 6.1 IB3 153 203 241 Forbidden Forbidden C 40
D Chloropivaloyl chloride 6.1 NA9263 I 6.1, 8 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden B 40
TP4, TP13, TP38, TP45
Chloroplatinic acid, solid 8 UN2507 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
Chloroprene, stabilized 3 UN1991 I 3, 6.1 387, B57, T14, TP2, None 201 243 Forbidden 30 L D 25, 40
TP13
Chloroprene, uninhibited Forbidden
1-Chloropropane 3 UN1278 II 3 IB2, IP8, N34, T7, TP2 None 202 242 Forbidden 60 L E
2-Chloropropane 3 UN2356 I 3 N36, T11, TP2, TP13 150 201 243 1 L 30 L E
3-Chloropropanol-1 6.1 UN2849 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
2-Chloropropene 3 UN2456 I 3 A3, N36, T11, TP2 150 201 243 1 L 30 L E
2-Chloropropionic acid 8 UN2511 III 8 IB3, T4, TP2 154 203 241 5 L 60 L A 8
2-Chloropyridine 6.1 UN2822 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 40
Chlorosilanes, corrosive, 8 UN2986 II 8, 3 T14, TP2, TP7, TP13, None 206 243 Forbidden 30 L C 40
flammable, n.o.s TP27
Chlorosilanes, corrosive, n.o.s 8 UN2987 II 8 B2, T14, TP2, TP7, None 206 242 Forbidden 30 L C 40
TP13, TP27
Chlorosilanes, flammable, 3 UN2985 II 3, 8 T14, TP2, TP7, TP13, None 206 243 Forbidden 5 L B 40
corrosive, n.o.s TP27
G Chlorosilanes, toxic, 6.1 UN3362 II 6.1,8,3 T14, TP2, TP7, TP13, None 206 243 Forbidden 30 L C 40, 125
corrosive, flammable, n.o.s TP27
G Chlorosilanes, toxic, 6.1 UN3361 II 6.1, 8 T14, TP2, TP7, TP13, None 206 243 Forbidden 30 L C 40
corrosive, n.o.s TP27
Chlorosilanes, water-reactive, 4.3 UN2988 I 4.3, 3, A2, T14, TP2, TP7, None 201 244 Forbidden 1 L D 13, 21,
flammable, corrosive, n.o.s 8 TP13, W31 40, 49,
100,
147,
148
+ Chlorosulfonic acid (with or 8 UN1754 I 8, 6.1 2, B9, B10, B14, B32, None 227 244 Forbidden Forbidden C 40
without sulfur trioxide) T20, TP2, TP38, TP45
Chlorotoluenes 3 UN2238 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
[[Page 195]]
Chlorotoluidines, liquid 6.1 UN3429 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Chlorotoluidines, solid 6.1 UN2239 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Chlorotrifluoromethane and 2.2 UN2599 ..... 2.2 ....................... 306 304 314, 315 75 kg 150 kg A
trifluoromethane azeotropic
mixture or Refrigerant gas R
503 with approximately 60
percent chlorotrifluoromethane
Chlorotrifluoromethane or 2.2 UN1022 ..... 2.2 ....................... 306 304 314, 315 75 kg 150 kg A
Refrigerant gas R 13
Chromic acid solution 8 UN1755 II 8 B2, IB2, T8, TP2 154 202 242 1 L 30 L C 40, 44,
89,
100,
141
............................... ......... ................ III 8 IB3, T4, TP1 154 203 241 5 L 60 L C 40, 44,
89,
100,
141
Chromic anhydride, see Chromium
trioxide, anhydrous
Chromic fluoride, solid 8 UN1756 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A 52
Chromic fluoride, solution 8 UN1757 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L A
............................... ......... ................ III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
Chromium nitrate 5.1 UN2720 III 5.1 A1, A29, IB8, IP3, T1, 152 213 240 25 kg 100 kg A
TP33
Chromium oxychloride 8 UN1758 I 8 A3, A6, A7, B10, N34, None 201 243 0.5 L 2.5 L C 40, 66,
T10, TP2 74, 89,
90
Chromium trioxide, anhydrous 5.1 UN1463 II 5.1, IB8, IP2, IP4, T3, None 212 242 5 kg 25 kg A 66, 90
6.1, 8 TP33, W31
Chromosulfuric acid 8 UN2240 I 8 A3, A6, A7, B4, B6, None 201 243 0.5L 2.5L B 40, 66,
N34, T10, TP2, TP13 74, 89,
90
Chromyl chloride, see Chromium
oxychloride
Cigar and cigarette lighters,
charged with fuel, see
Lighters or Lighter refills
containing flammable gas.
Coal briquettes, hot Forbidden
Coal gas, compressed 2.3 UN1023 ..... 2.3, 2.1 3 None 302 314, 315 Forbidden Forbidden D 40
Coal tar distillates, flammable 3 UN1136 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T4, TP1, TP29 150 203 242 60 L 220 L A
Coal tar dye, corrosive,
liquid, n.o.s, see Dyes,
liquid or solid, n.o.s. or Dye
intermediates, liquid or
solid, corrosive, n.o.s.
[[Page 196]]
Coating solution (includes 3 UN1139 I 3 T11, TP1, TP8, TP27 150 201 243 1 L 30 L E .......
surface treatments or coatings
used for industrial or other
purposes such as vehicle
undercoating, drum or barrel
lining)
............................... ................ II 3 149, IB2, T4, TP1, TP8 150 202 242 5 L 60 L B .......
............................... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A .......
Cobalt naphthenates, powder 4.1 UN2001 III 4.1 A19, IB8, IP3, T1, TP33 151 213 240 25 kg 100 kg A
Cobalt resinate, precipitated 4.1 UN1318 III 4.1 A1, A19, IB6, T1, TP33 151 213 240 25 kg 100 kg A
Coke, hot Forbidden
Collodion, see Nitrocellulose
etc
D G Combustible liquid, n.o.s. Comb liq NA1993 III None 148, IB3, T1, TP1 150 203 241 60 L 220 L A .......
G Components, explosive train, 1.2B UN0382 ..... 1.2B 101 None 62 None Forbidden Forbidden 05 25
n.o.s.
G Components, explosive train, 1.4B UN0383 ..... 1.4B 101 None 62 None Forbidden 75 kg 05 25
n.o.s.
G Components, explosive train, 1.4S UN0384 ..... 1.4S 101 None 62 None 25 kg 100 kg 01 25
n.o.s.
G Components, explosive train, 1.1B UN0461 ..... 1.1B 101 None 62 None Forbidden Forbidden 05 25
n.o.s.
Composition B, see Hexolite,
etc
D G Compounds, cleaning liquid 8 NA1760 I 8 A7, B10, T14, TP2, TP27 None 201 243 0.5 L 2.5 L B 40
............................... ................ II 8 386, B2, IB2, N37, T11, 154 202 242 1 L 30 L B 40
TP2, TP27
............................... ................ III 8 386, IB3, N37, T7, TP1, 154 203 241 5 L 60 L A 40
TP28
D G Compounds, cleaning liquid 3 NA1993 I 3 T11, TP1 150 201 243 1 L 30 L E
............................... ......... ................ II 3 IB2, T7, TP1, TP8, TP28 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, B52, IB3, T4, TP1, 150 203 242 60 L 220 L A
TP29
D G Compounds, tree killing, liquid 8 NA1760 I 8 A7, B10, T14, TP2, TP27 None 201 243 0.5 L 2.5 L B 40
or Compounds, weed killing,
liquid
............................... ......... ................ II 8 B2, IB2, N37, T11, TP2, 154 202 242 1 L 30 L B 40
TP27
............................... ......... ................ III 8 IB3, N37, T7, TP1, TP28 154 203 241 5 L 60 L A 40
D G Compounds, tree killing, liquid 3 NA1993 I 3 T11, TP1 150 201 243 1 L 30 L E
or Compounds, weed killing,
liquid
............................... ......... ................ II 3 IB2, T7, TP1, TP8, TP28 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, B52, IB3, T4, TP1, 150 203 242 60 L 220 L A
TP29
[[Page 197]]
D G Compounds, tree killing, liquid 6.1 NA2810 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
or Compounds, weed killing,
liquid
............................... ......... ................ II 6.1 IB2, T11, TP2, TP27 153 202 243 5 L 60 L B 40
............................... ......... ................ III 6.1 IB3, T7, TP1, TP28 153 203 241 60 L 220 L A 40
G Compressed gas, flammable, 2.1 UN1954 ..... 2.1 ....................... 306 302, 305 314, 315 Forbidden 150 kg D 40
n.o.s.
G Compressed gas, n.o.s 2.2 UN1956 ..... 2.2 ....................... 306, 307 302, 305 314, 315 75 kg 150 kg A
G Compressed gas, oxidizing, 2.2 UN3156 ..... 2.2, 5.1 A14 306 302 314, 315 75 kg 150 kg D
n.o.s.
G I Compressed gas, toxic, 2.3 UN3304 ..... 2.3, 8 1 None 192 245 Forbidden Forbidden D 40
corrosive, n.o.s. Inhalation
Hazard Zone A
G I Compressed gas, toxic, 2.3 UN3304 ..... 2.3, 8 2, B9, B14 None 302, 305 314, 315 Forbidden Forbidden D 40
corrosive, n.o.s. Inhalation
Hazard Zone B
G I Compressed gas, toxic, 2.3 UN3304 ..... 2.3, 8 3, B14 None 302, 305 314, 315 Forbidden Forbidden D 40
corrosive, n.o.s. Inhalation
Hazard Zone C
G I Compressed gas, toxic, 2.3 UN3304 ..... 2.3, 8 4 None 302, 305 314, 315 Forbidden Forbidden D 40
corrosive, n.o.s. Inhalation
Hazard Zone D
G I Compressed gas, toxic, 2.3 UN3305 ..... 2.3, 1 None 192 245 Forbidden Forbidden D 17, 40
flammable, corrosive, n.o.s. 2.1, 8
Inhalation Hazard Zone A
G I Compressed gas, toxic, 2.3 UN3305 ..... 2.3, 2, B9, B14 None 302, 305 314, 315 Forbidden Forbidden D 17, 40
flammable, corrosive, n.o.s. 2.1, 8
Inhalation Hazard Zone B
G I Compressed gas, toxic, 2.3 UN3305 ..... 2.3, 3, B14 None 302, 305 314, 315 Forbidden Forbidden D 17, 40
flammable, corrosive, n.o.s. 2.1, 8
Inhalation Hazard Zone C
G I Compressed gas, toxic, 2.3 UN3305 ..... 2.3, 4 None 302, 305 314, 315 Forbidden Forbidden D 17, 40
flammable, corrosive, n.o.s. 2.1, 8
Inhalation Hazard Zone D
G Compressed gas, toxic, 2.3 UN1953 ..... 2.3, 2.1 1 None 192 245 Forbidden Forbidden D 40
flammable, n.o.s. Inhalation
hazard Zone A
G Compressed gas, toxic, 2.3 UN1953 ..... 2.3, 2.1 2, B9, B14 None 302, 305 314, 315 Forbidden Forbidden D 40
flammable, n.o.s. Inhalation
hazard Zone B
G Compressed gas, toxic, 2.3 UN1953 ..... 2.3, 2.1 3, B14 None 302, 305 314, 315 Forbidden Forbidden D 40
flammable, n.o.s. Inhalation
Hazard Zone C
G Compressed gas, toxic, 2.3 UN1953 ..... 2.3, 2.1 4 None 302, 305 314, 315 Forbidden Forbidden D 40
flammable, n.o.s. Inhalation
Hazard Zone D
G Compressed gas, toxic, n.o.s. 2.3 UN1955 ..... 2.3 1 None 192 245 Forbidden Forbidden D 40
Inhalation Hazard Zone A
G Compressed gas, toxic, n.o.s. 2.3 UN1955 ..... 2.3 2, B9, B14 None 302, 305 314, 315 Forbidden Forbidden D 40
Inhalation Hazard Zone B
G Compressed gas, toxic, n.o.s. 2.3 UN1955 ..... 2.3 3, B14 None 302, 305 314, 315 Forbidden Forbidden D 40
Inhalation Hazard Zone C
G Compressed gas, toxic, n.o.s. 2.3 UN1955 ..... 2.3 4 None 302, 305 314, 315 Forbidden Forbidden D 40
Inhalation Hazard Zone D
G I Compressed gas, toxic, 2.3 UN3306 ..... 2.3, 1 None 192 244 Forbidden Forbidden D 40, 89,
oxdizing, corrosive, n.o.s. 5.1, 8 90
Inhalation Hazard Zone A
[[Page 198]]
G I Compressed gas, toxic, 2.3 UN3306 ..... 2.3, 2, B9, B14 None 302, 305 314, 315 Forbidden Forbidden D 40, 89,
oxidizing, corrosive, n.o.s. 5.1, 8 90
Inhalation Hazard Zone B
G I Compressed gas, toxic, 2.3 UN3306 ..... 2.3, 3, B14 None 302, 305 314, 315 Forbidden Forbidden D 40, 89,
oxidizing, corrosive, n.o.s. 5.1, 8 90
Inhalation Hazard Zone C
G I Compressed gas, toxic, 2.3 UN3306 ..... 2.3, 4 None 302, 305 314, 315 Forbidden Forbidden D 40, 89,
oxidizing, corrosive, n.o.s. 5.1, 8 90
Inhalation Hazard Zone D
G Compressed gas, toxic, 2.3 UN3303 ..... 2.3, 5.1 1 None 192 245 Forbidden Forbidden D 40
oxidizing, n.o.s. Inhalation
Hazard Zone A
G Compressed gas, toxic, 2.3 UN3303 ..... 2.3, 5.1 2, B9, B14 None 302, 305 314, 315 Forbidden Forbidden D 40
oxidizing, n.o.s. Inhalation
Hazard Zone B
G Compressed gas, toxic, 2.3 UN3303 ..... 2.3, 5.1 3, B14 None 302, 305 314, 315 Forbidden Forbidden D 40
oxidizing, n.o.s. Inhalation
Hazard Zone C
G Compressed gas, toxic, 2.3 UN3303 ..... 2.3, 5.1 4 None 302, 305 314, 315 Forbidden Forbidden D 40
oxidizing, n.o.s. Inhalation
Hazard Zone D
D Consumer commodity ORM-D ................ ..... None 222 156, 306 156, 306 None 30 kg Forbidden A
gross
Consumer commodity 9 ID8000 ..... 9 ....................... 167 167 None 30 kg 30 kg
gross gross
G Contrivances, water-activated, 1.2L UN0248 ..... 1.2L ....................... None 62 None Forbidden Forbidden 05 25,
with burster, expelling charge 14E,
or propelling charge 15E,
17E
G Contrivances, water-activated, 1.3L UN0249 ..... 1.3L ....................... None 62 None Forbidden Forbidden 05 25,
with burster, expelling charge 14E,
or propelling charge 15E,
17E
Copper acetoarsenite 6.1 UN1585 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Copper acetylide Forbidden
Copper amine azide Forbidden
Copper arsenite 6.1 UN1586 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Copper based pesticides, 3 UN2776 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L B 40
liquid, flammable, toxic,
flash point less than 23
degrees C
............................... ......... ................ II 3, 6.1 IB2, T11, TP2, TP13, 150 202 243 1 L 60 L B 40
TP27
[[Page 199]]
Copper based pesticides, 6.1 UN3010 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
liquid, toxic
............................... ......... ................ II 6.1 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1 IB3, T7, TP2, TP28 153 203 241 60 L 220 L A 40
Copper based pesticides, 6.1 UN3009 I 6.1, 3 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
liquid, toxic, flammable,
flash point not less than 23
degrees C
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1, 3 B1, IB3, T7, TP2, TP28 153 203 242 60 L 220 L A 40
Copper based pesticides, solid, 6.1 UN2775 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 40
toxic
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
Copper chlorate 5.1 UN2721 II 5.1 A1, IB8, IP2, IP4, T3, 152 212 242 5 kg 25 kg A 56, 58
TP33
Copper chloride 8 UN2802 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
Copper cyanide 6.1 UN1587 II 6.1 IB8, IP2, IP4, T3, TP33 153 204 242 25 kg 100 kg A 52
Copper selenate, see Selenates
or Selenites
Copper selenite, see Selenates
or Selenites
Copper tetramine nitrate Forbidden
A W Copra 4.2 UN1363 III 4.2 IB8, IP3, IP7 None 213 241 Forbidden Forbidden A 13, 25,
119
Cord, detonating, flexible 1.1D UN0065 ..... 1.1D 102, 148 63(a) 62 None Forbidden Forbidden 04 25
Cord, detonating, flexible 1.4D UN0289 ..... 1.4D 148 None 62 None Forbidden 75 kg 02 25
Cord detonating or Fuse 1.2D UN0102 ..... 1.2D ....................... None 62 None Forbidden Forbidden 04 25
detonating metal clad
Cord, detonating or Fuse, 1.1D UN0290 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
detonating metal clad
Cord, detonating, mild effect 1.4D UN0104 ..... 1.4D ....................... None 62 None Forbidden 75 kg 02 25
or Fuse, detonating, mild
effect metal clad
Cord, igniter 1.4G UN0066 ..... 1.4G ....................... None 62 None Forbidden 75 kg 02 25
Cordeau detonant fuse, see
Cord, detonating, etc; Cord,
detonating, flexible
Cordite, see Powder, smokeless
G Corrosive liquid, acidic, 8 UN3264 I 8 A6, B10, T14, TP2, TP27 None 201 243 0.5 L 2.5 L B 40
inorganic, n.o.s
II 8 386, B2, IB2, T11, TP2, 154 202 242 1 L 30 L B 40
TP27
III 8 IB3, T7, TP1, TP28 154 203 241 5 L 60 L A 40
G Corrosive liquid, acidic, 8 UN3265 I 8 A6, B10, T14, TP2, TP27 None 201 243 0.5 L 2.5 L B 40
organic, n.o.s
II 8 148, B2, IB2, T11, TP2, 154 202 242 1 L 30 L B 40
TP27
III 8 386, IB3, T7, TP1, TP28 154 203 241 5 L 60 L A 40
[[Page 200]]
G Corrosive liquid, basic, 8 UN3266 I 8 A6, T14, TP2, TP27 None 201 243 0.5 L 2.5 L B 40, 52
inorganic, n.o.s
II 8 386, B2, IB2, T11, TP2, 154 202 242 1 L 30 L B 40, 52
TP27
III 8 IB3, T7, TP1, TP28 154 203 241 5 L 60 L A 40, 52
G Corrosive liquid, basic, 8 UN3267 I 8 A6, B10, T14, TP2, TP27 None 201 243 0.5 L 2.5 L B 40, 52
organic, n.o.s.
............................... ......... ................ II 8 B2, IB2, T11, TP2, TP27 154 202 242 1 L 30 L B 40, 52
............................... ......... ................ III 8 IB3, T7, TP1, TP28 154 203 241 5 L 60 L A 40, 52
G Corrosive liquid, self-heating, 8 UN3301 I 8, 4.2 A6, B10 None 201 243 0.5 L 2.5 L D
n.o.s.
............................... ......... ................ II 8, 4.2 B2, IB1 154 202 242 1 L 30 L D
G Corrosive liquids, flammable, 8 UN2920 I 8, 3 A6, B10, T14, TP2, TP27 None 201 243 0.5 L 2.5 L C 25, 40
n.o.s.
............................... ................ II 8, 3 B2, IB2, T11, TP2, TP27 154 202 243 1 L 30 L C 25, 40
G Corrosive liquids, n.o.s 8 UN1760 I 8 A6, A7, B10, T14, TP2, None 201 243 0.5 L 2.5 L B 40
TP27
............................... ................ II 8 B2, IB2, T11, TP2, TP27 154 202 242 1 L 30 L B 40
............................... ................ III 8 IB3, T7, TP1, TP28 154 203 241 5 L 60 L A 40
G Corrosive liquids, oxidizing, 8 UN3093 I 8, 5.1 A6, A7 None 201 243 Forbidden 2.5 L C 89
n.o.s.
............................... ......... ................ II 8, 5.1 A6, A7, IB2 None 202 243 1 L 30 L C 89
G Corrosive liquids, toxic, 8 UN2922 I 8, 6.1 A6, A7, B10, T14, TP2, None 201 243 0.5 L 2.5 L B 40
n.o.s. TP13, TP27
II 8, 6.1 B3, IB2, T7, TP2 154 202 243 1 L 30 L B 40
III 8, 6.1 IB3, T7, TP1, TP28 154 203 241 5 L 60 L B 40
G Corrosive liquids, water- 8 UN3094 I 8, 4.3 A6, A7 None 201 243 Forbidden 1 L E 13, 148
reactive, n.o.s
II 8, 4.3 A6, A7 None 202 243 1 L 5 L E 13, 148
G Corrosive solid, acidic, 8 UN3260 I 8 IB7, IP1, T6, TP33 None 211 242 1 kg 25 kg B
inorganic, n.o.s.
............................... ......... ................ II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg B
............................... ......... ................ III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
G Corrosive solid, acidic, 8 UN3261 I 8 IB7, IP1, T6, TP33 None 211 242 1 kg 25 kg B
organic, n.o.s.
............................... ......... ................ II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg B
............................... ......... ................ III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
G Corrosive solid, basic, 8 UN3262 I 8 IB7, IP1, T6, TP33 None 211 242 1 kg 25 kg B 52
inorganic, n.o.s.
............................... ......... ................ II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg B 52
[[Page 201]]
............................... ......... ................ III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A 52
G Corrosive solid, basic, 8 UN3263 I 8 IB7, IP1, T6, TP33 None 211 242 1 kg 25 kg B 52
organic, n.o.s.
............................... ......... ................ II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg B 52
............................... ......... ................ III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A 52
G Corrosive solids, flammable, 8 UN2921 I 8, 4.1 IB6, T6, TP33 None 211 242 1 kg 25 kg B 12, 25
n.o.s.
............................... ......... ................ II 8, 4.1 IB8, IP2, IP4, T3, TP33 None 212 242 15 kg 50 kg B 12, 25
G Corrosive solids, n.o.s. 8 UN1759 I 8 IB7, IP1, T6, TP33 None 211 242 1 kg 25 kg B
............................... ......... ................ II 8 128, IB8, IP2, IP4, T3, 154 212 240 15 kg 50 kg A
TP33
............................... ......... ................ III 8 128, IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
G Corrosive solids, oxidizing, 8 UN3084 I 8, 5.1 T6, TP33 None 211 242 1 kg 25 kg C
n.o.s.
............................... ......... ................ II 8, 5.1 IB6, IP2, T3, TP33 None 212 242 15 kg 50 kg C
G Corrosive solids, self-heating, 8 UN3095 I 8, 4.2 T6, TP33 None 211 243 1 kg 25 kg C
n.o.s.
............................... ......... ................ II 8, 4.2 IB6, IP2, T3, TP33 None 212 242 15 kg 50 kg C
G Corrosive solids, toxic, n.o.s 8 UN2923 I 8, 6.1 IB7, T6, TP33 None 211 242 1 kg 25 kg B 40
II 8, 6.1 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg B 40
III 8, 6.1 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg B 40
G Corrosive solids, water- 8 UN3096 I 8, 4.3 IB4, IP1, T6, TP33 None 211 243 1 kg 25 kg D 13, 148
reactive, n.o.s
......... II 8, 4.3 IB6, IP2, T3, TP33, None 212 242 15 kg 50 kg D 13, 148
W100
D W Cotton 9 NA1365 ..... 9 137, IB8, IP2, IP4, W41 None None None No limit No limit A
A W Cotton waste, oily 4.2 UN1364 III 4.2 IB8, IP3, IP7 None 213 None Forbidden Forbidden A 54
A I W Cotton, wet 4.2 UN1365 III 4.2 IB8, IP3, IP7 None 204 241 Forbidden Forbidden A
Coumarin derivative pesticides, 3 UN3024 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L B 40
liquid, flammable, toxic,
flash point less than 23
degrees C
............................... ......... ................ II 3, 6.1 IB2, T11, TP2, TP13, 150 202 243 1 L 60 L B 40
TP27
Coumarin derivative pesticides, 6.1 UN3026 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
liquid, toxic
............................... ......... ................ II 6.1 IB2, T11, TP2, TP27 153 202 243 5 L 60 L B 40
............................... ......... ................ III 6.1 IB3, T7, TP1, TP28 153 203 241 60 L 220 L A 40
Coumarin derivative pesticides, 6.1 UN3025 I 6.1, 3 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
liquid, toxic, flammable,
flash point not less than 23
degrees C
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1, 3 B1, IB3, T7, TP1, TP28 153 203 242 60 L 220 L A 40
Coumarin derivative pesticides, 6.1 UN3027 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 40
solid, toxic
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
Cresols, liquid 6.1 UN2076 II 6.1, 8 IB2, IP2, IP4, T7, TP2 153 202 243 1 L 30 L B
Cresols, solid 6.1 UN3455 II 6.1, 8 IB8, IP2, IP4, T3, TP33 153 212 242 15 kg 50 kg B
Cresylic acid 6.1 UN2022 II 6.1, 8 IB2, T7, TP2, TP13 153 202 243 1 L 30 L B
Crotonaldehyde or 6.1 UN1143 I 6.1, 3 2, 175, 387, B9, B14, None 227 244 Forbidden Forbidden D 25, 40
Crotonaldehyde, stabilized B32, B77, T20, TP2,
TP13, TP38, TP45
[[Page 202]]
Crotonic acid, liquid 8 UN3472 III 8 IB8, T1 154 203 241 5 L 60 L A 12, 25
Crotonic acid, solid 8 UN2823 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A 12, 25
Crotonylene 3 UN1144 I 3 T11, TP2 150 201 243 1 L 30 L E
Cupriethylenediamine solution 8 UN1761 II 8, 6.1 IB2, T7, TP2 154 202 243 1 L 30 L A
............................... ......... ................ III 8, 6.1 IB3, T7, TP1, TP28 154 203 242 5 L 60 L A 95
Cutters, cable, explosive 1.4S UN0070 ..... 1.4S ....................... None 62 62 25 kg 100 kg 01 25
Cyanide or cyanide mixtures,
dry, see Cyanides, inorganic,
solid, n.o.s.
G Cyanide solutions, n.o.s. 6.1 UN1935 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40, 52
II 6.1 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L A 40, 52
TP27
III 6.1 IB3, T7, TP2, TP13, 153 203 241 60 L 220 L A 40, 52
TP28
Cyanides, inorganic, solid, 6.1 UN1588 I 6.1 IB7, IP1, N74, N75, T6, None 211 242 5 kg 50 kg A 52
n.o.s. TP33
............................... ......... ................ II 6.1 IB8, IP2, IP4, N74, 153 212 242 25 kg 100 kg A 52
N75, T3, TP33
............................... ......... ................ III 6.1 IB8, IP3, N74, N75, T1, 153 213 240 100 kg 200 kg A 52
TP33
Cyanogen 2.3 UN1026 ..... 2.3, 2.1 2 None 304 245 Forbidden Forbidden D 40
Cyanogen bromide 6.1 UN1889 I 6.1, 8 A6, A8, T6, TP33, W31 None 211 242 1 kg 15 kg D 40, 52
Cyanogen chloride, stabilized 2.3 UN1589 ..... 2.3, 8 1, 387 None 192 245 Forbidden Forbidden D 25, 40
Cyanuric chloride 8 UN2670 II 8 IB8, IP2, IP4, T3, TP33 None 212 240 15 kg 50 kg A 12, 25,
40
Cyanuric triazide Forbidden
Cyclobutane 2.1 UN2601 ..... 2.1 ....................... 306 304 314, 315 Forbidden 150 kg B 40
Cyclobutyl chloroformate 6.1 UN2744 II 6.1, 8, IB1, T7, TP2, TP13 153 202 243 1 L 30 L A 12, 13,
3 21, 25,
40, 100
1,5,9-Cyclododecatriene 6.1 UN2518 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A 40
Cycloheptane 3 UN2241 II 3 IB2, T4, TP2 150 202 242 5 L 60 L B 40
Cycloheptatriene 3 UN2603 II 3, 6.1 IB2, T7, TP1, TP13 150 202 243 1 L 60 L E 40
Cycloheptene 3 UN2242 II 3 B1, IB2, T4, TP1 150 202 242 5 L 60 L B
Cyclohexane 3 UN1145 II 3 IB2, T4, TP1 150 202 242 5 L 60 L E
Cyclohexanone 3 UN1915 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
[[Page 203]]
Cyclohexene 3 UN2256 II 3 IB2, T4, TP1 150 202 242 5 L 60 L E
Cyclohexenyltrichlorosilane 8 UN1762 II 8 A7, B2, N34, T10, TP2, None 206 242 Forbidden 30 L C 40
TP7, TP13
Cyclohexyl acetate 3 UN2243 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Cyclohexyl isocyanate 6.1 UN2488 I 6.1, 3 2, B9, B14, B32, B77, None 227 244 Forbidden Forbidden D 40
T20, TP2, TP13, TP38,
TP45
Cyclohexyl mercaptan 3 UN3054 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A 40, 95,
102
Cyclohexylamine 8 UN2357 II 8, 3 IB2, T7, TP2 None 202 243 1 L 30 L A 40
Cyclohexyltrichlorosilane 8 UN1763 II 8 A7, B2, N34, T10, TP2, None 206 242 Forbidden 30 L C 40
TP7, TP13
Cyclonite and
cyclotetramethylenetetranitram
ine mixtures, wetted or
desensitized see RDX and HMX
mixtures, wetted or
desensitized etc
Cyclonite and HMX mixtures,
wetted or desensitized see RDX
and HMX mixtures, wetted or
desensitized etc
Cyclonite and octogen mixtures,
wetted or desensitized see RDX
and HMX mixtures, wetted or
desensitized etc
Cyclonite, see
Cyclotrimethylenetrinitramine,
etc
Cyclooctadiene phosphines, see
9-Phosphabicyclononanes
Cyclooctadienes 3 UN2520 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Cyclooctatetraene 3 UN2358 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Cyclopentane 3 UN1146 II 3 IB2, T7, TP1 150 202 242 5 L 60 L E
Cyclopentane, methyl, see
Methylcyclopentane
Cyclopentanol 3 UN2244 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Cyclopentanone 3 UN2245 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Cyclopentene 3 UN2246 II 3 IB2, IP8, T7, TP2 150 202 242 5 L 60 L E
Cyclopropane 2.1 UN1027 ..... 2.1 T50 306 304 314, 315 Forbidden 150 kg E 40
Cyclotetramethylene Forbidden
tetranitramine (dry or
unphlegmatized) (HMX)
Cyclotetramethylenetetranitrami 1.1D UN0484 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
ne, desensitized or Octogen,
desensitized or HMX,
desensitized
Cyclotetramethylenetetranitrami 1.1D UN0226 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
ne, wetted or HMX, wetted or
Octogen, wetted with not less
than 15 percent water, by mass
[[Page 204]]
Cyclotrimethylenenitramine and ......... ................ ..... ........ ....................... ............ .......... ........ .......... .......... .......... .......
octogen, mixtures, wetted or
desensitized see RDX and HMX
mixtures, wetted or
desensitized, etc
Cyclotrimethylenetrinitramine
and
cyclotetramethylenetetranitram
ine mixtures, wetted or
desensitized see RDX and HMX
mixtures, wetted or
desensitized etc
Cyclotrimethylenetrinitramine ........ ............ .......... ........ ..........
and HMX mixtures, wetted or
desensitized see RDX and HMX
mixtures, wetted or
desensitized etc
Cyclotrimethylenetrinitramine, 1.1D UN0483 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
desensitized or Cyclonite,
desensitized or Hexogen,
desensitized or RDX,
desensitized
Cyclotrimethylenetrinitramine, 1.1D UN0072 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
wetted or Cyclonite, wetted or
Hexogen, wetted or RDX, wetted
with not less than 15 percent
water by mass
Cymenes 3 UN2046 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Dangerous Goods in Machinery or 9 UN3363 ..... ........ 136, A105 None 222 None See A105 See A105 A.
Dangerous Goods in Apparatus
Decaborane 4.1 UN1868 II 4.1, 6.1 A19, A20, IB6, IP2, T3, None 212 None Forbidden 50 kg A 74
TP33, W31
Decahydronaphthalene 3 UN1147 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
n-Decane 3 UN2247 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Deflagrating metal salts of 1.3C UN0132 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25, 5E
aromatic nitroderivatives,
n.o.s.
Delay electric igniter, see
Igniters
D Denatured alcohol 3 NA1987 II 3 172, T8 150 202 242 5 L 60 L B .......
......... ................ III 3 172, B1, T7 150 203 242 60 L 220 L A .......
Depth charges, see Charges,
depth
G Desensitized explosive, liquid, 3 UN3379 I 3 164 None 201 None Forbidden Forbidden D 36
n.o.s.
G Desensitized explosive, solid, 4.1 UN3380 I 4.1 164 None 211 None Forbidden Forbidden D 28, 36
n.o.s.
[[Page 205]]
Detonating relays, see
Detonators, etc
Detonator assemblies, non- 1.1B UN0360 ..... 1.1B ....................... None 62 None Forbidden Forbidden 05 25
electric for blasting
Detonator assemblies, non- 1.4B UN0361 ..... 1.4B 103, 148 63(f), 63(g) 62 None Forbidden 75 kg 05 25
electric, for blasting
Detonator assemblies, non- 1.4S UN0500 ..... 1.4S 148, 347 63(f), 63(g) 62 None 25 kg 100 kg 01 25
electric, for blasting
Detonators, electric, for 1.1B UN0030 ..... 1.1B 148 63(f), 63(g) 62 None Forbidden Forbidden 05 25
blasting
Detonators, electric, for 1.4B UN0255 ..... 1.4B 103, 148 63(f), 63(g) 62 None Forbidden 75 kg 05 25
blasting
Detonators, electric for 1.4S UN0456 ..... 1.4S 148, 347 63(f), 63(g) 62 None 25 kg 100 kg 01 25
blasting
Detonators for ammunition 1.1B UN0073 ..... 1.1B ....................... None 62 None Forbidden Forbidden 05 25
Detonators for ammunition 1.2B UN0364 ..... 1.2B ....................... None 62 None Forbidden Forbidden 05 25
Detonators for ammunition 1.4B UN0365 ..... 1.4B 103 None 62 None Forbidden 75 kg 05 25
Detonators for ammunition 1.4S UN0366 ..... 1.4S 347 None 62 None 25 kg 100 kg 01 25
Detonators, non-electric, for 1.1B UN0029 ..... 1.1B ....................... None 62 None Forbidden Forbidden 05 25
blasting
Detonators, non-electric, for 1.4B UN0267 ..... 1.4B 103 63(f), 63(g) 62 None Forbidden 75 kg 05 25
blasting
Detonators, non-electric, for 1.4S UN0455 ..... 1.4S 148, 347 63(f), 63(g) 62 None 25 kg 100 kg 01 25
blasting
Deuterium, compressed 2.1 UN1957 ..... 2.1 N89 306 302 None Forbidden 150 kg E 40
Devices, small, hydrocarbon gas 2.1 UN3150 ..... 2.1 ....................... 306 304 None 1 kg 15 kg B 40
powered or Hydrocarbon gas
refills for small devices with
release device
Di-n-amylamine 3 UN2841 III 3, 6.1 B1, IB3, T4, TP1 150 203 242 60 L 220 L A
Di-n-butyl peroxydicarbonate, Forbidden
with more than 52 percent in
solution
Di-n-butylamine 8 UN2248 II 8, 3 IB2, T7, TP2 None 202 243 1 L 30 L A
2,2-Di-(tert-butylperoxy) Forbidden
butane, with more than 55
percent in solution
Di-(tert-butylperoxy) Forbidden
phthalate, with more than 55
percent in solution
2,2-Di-(4,4-di-tert- Forbidden
butylperoxycyclohexyl)
propane, with more than 42
percent with inert solid
Di-2,4-dichlorobenzoyl Forbidden
peroxide, with more than 75
percent with water
1,2-Di-(dimethylamino)ethane 3 UN2372 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Di-2-ethylhexyl phosphoric
acid, see Diisooctyl acid
phosphate
Di-(1-hydroxytetrazole) (dry) Forbidden
Di-(1-naphthoyl) peroxide Forbidden
a,a'-Di-(nitroxy) methylether Forbidden
[[Page 206]]
Di-(beta-nitroxyethyl) ammonium Forbidden
nitrate
Diacetone alcohol 3 UN1148 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Diacetone alcohol peroxides, Forbidden
with more than 57 percent in
solution with more than 9
percent hydrogen peroxide,
less than 26 percent diacetone
alcohol and less than 9
percent water; total active
oxygen content more than 9
percent by mass
Diacetyl, see Butanedione
Diacetyl peroxide, solid, or Forbidden
with more than 25 percent in
solution
Diallylamine 3 UN2359 II 3, 6.1, IB2, T7, TP1 150 202 243 1 L 5 L B 21, 40,
8 100
Diallylether 3 UN2360 II 3, 6.1 IB2, N12, T7, TP1, TP13 150 202 243 1 L 60 L E 40
4,4'-Diaminodiphenyl methane 6.1 UN2651 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
p-Diazidobenzene Forbidden
1,2-Diazidoethane Forbidden
1,1'-Diazoaminonaphthalene Forbidden
Diazoaminotetrazole (dry) Forbidden
Diazodinitrophenol (dry) Forbidden
Diazodinitrophenol, wetted with 1.1A UN0074 ..... 1.1A 111, 117 None 62 None Forbidden Forbidden 05 25
not less than 40 percent water
or mixture of alcohol and
water, by mass
Diazodiphenylmethane Forbidden
Diazonium nitrates (dry) Forbidden
Diazonium perchlorates (dry) Forbidden
1,3-Diazopropane Forbidden
Dibenzyl peroxydicarbonate, Forbidden
with more than 87 percent with
water
Dibenzyldichlorosilane 8 UN2434 II 8 B2, T10, TP2, TP7, TP13 154 206 242 Forbidden 30 L C 40
Diborane 2.3 UN1911 ..... 2.3, 2.1 1, N89 None 302 None Forbidden Forbidden D 40, 57
[[Page 207]]
D Diborane mixtures 2.1 NA1911 ..... 2.1 5 None 302 245 Forbidden Forbidden D 40, 57
Dibromoacetylene Forbidden
1,2-Dibromobutan-3-one 6.1 UN2648 II 6.1 IB2 153 202 243 5 L 60 L B 40
Dibromochloropropane 6.1 UN2872 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
............................... ......... ................ III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
A Dibromodifluoromethane, R12B2 9 UN1941 III None T11, TP2 155 203 241 100 L 220 L A 25
1,2-Dibromoethane, see Ethylene
dibromide
Dibromomethane 6.1 UN2664 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Dibutyl ethers 3 UN1149 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Dibutylaminoethanol 6.1 UN2873 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
N,N'-Dichlorazodicarbonamidine Forbidden
(salts of) (dry)
1,1-Dichloro-1-nitroethane 6.1 UN2650 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 12, 25,
40, 74
D 3,5-Dichloro-2,4,6- 6.1 NA9264 I 6.1 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden A 40
trifluoropyridine TP4, TP13, TP38, TP45
Dichloroacetic acid 8 UN1764 II 8 A3, A6, A7, B2, IB2, 154 202 242 1 L 30 L A
N34, T8, TP2
1,3-Dichloroacetone 6.1 UN2649 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B 12, 25,
40
Dichloroacetyl chloride 8 UN1765 II 8 A3, A6, A7, B2, B6, 154 202 242 1 L 30 L D 40
IB2, N34, T7, TP2
Dichloroacetylene Forbidden
+ Dichloroanilines, liquid 6.1 UN1590 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 40
Dichloroanilines, solid 6.1 UN3442 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
+ o-Dichlorobenzene 6.1 UN1591 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
2,2'-Dichlorodiethyl ether 6.1 UN1916 II 6.1, 3 IB2, N33, N34, T7, TP2 153 202 243 5 L 60 L A
Dichlorodifluoromethane and 2.2 UN2602 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
difluoroethane azeotropic
mixture or Refrigerant gas R
500 with approximately 74
percent
dichlorodifluoromethane
Dichlorodifluoromethane or 2.2 UN1028 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
Refrigerant gas R 12
Dichlorodimethyl ether, 6.1 UN2249 I 6.1, 3 ....................... None 201 243 Forbidden Forbidden .......... 40
symmetrical
1,1-Dichloroethane 3 UN2362 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B 40
1,2-Dichloroethane, see
Ethylene dichloride
Dichloroethyl sulfide Forbidden
1,2-Dichloroethylene 3 UN1150 II 3 IB2, T7, TP2 150 202 242 5 L 60 L B
Dichlorofluoromethane or 2.2 UN1029 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
Refrigerant gas R21
Dichloroisocyanuric acid, dry 5.1 UN2465 II 5.1 28, IB8, IP2, IP4, T3, 152 212 240 5 kg 25 kg A 13
or Dichloroisocyanuric acid TP33
salts
Dichloroisopropyl ether 6.1 UN2490 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L B
Dichloromethane 6.1 UN1593 III 6.1 IB3, IP8, N36, T7, TP2 153 203 241 60 L 220 L A
Dichloropentanes 3 UN1152 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Dichlorophenyl isocyanates 6.1 UN2250 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B 25, 40
[[Page 208]]
Dichlorophenyltrichlorosilane 8 UN1766 II 8 A7, B2, B6, N34, T10, None 206 242 Forbidden 30 L C 40
TP2, TP7, TP13
1,2-Dichloropropane 3 UN1279 II 3 IB2, N36, T4, TP1 150 202 242 5 L 60 L B
1,3-Dichloropropanol-2 6.1 UN2750 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 12, 25,
40
Dichloropropene and propylene
dichloride mixture, see 1,2-
Dichloropropane
Dichloropropenes 3 UN2047 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Dichlorosilane 2.3 UN2189 ..... 2.3, 2, B9, B14 None 304 314, 315 Forbidden Forbidden D 17, 40
2.1, 8
1,2-Dichloro-1,1,2,2- 2.2 UN1958 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
tetrafluoroethane or
Refrigerant gas R 114
Dichlorovinylchloroarsine Forbidden
Dicycloheptadiene, see Bicyclo
[2,2,1] hepta-2,5-diene,
stabilized
Dicyclohexylamine 8 UN2565 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
Dicyclohexylammonium nitrite 4.1 UN2687 III 4.1 IB8, IP3, T1, TP33 151 213 240 25 kg 100 kg A 25
Dicyclopentadiene 3 UN2048 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Didymium nitrate 5.1 UN1465 III 5.1 A1, IB8, IP3, T1, TP33 152 213 240 25 kg 100 kg A
D Diesel fuel 3 NA1993 III None 144, B1, IB3, T4, TP1, 150 203 242 60 L 220 L A
TP29
I Diesel fuel 3 UN1202 III 3 144, B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Diethanol nitrosamine dinitrate Forbidden
(dry)
Diethoxymethane 3 UN2373 II 3 IB2, T4, TP1 150 202 242 5 L 60 L E
3,3-Diethoxypropene 3 UN2374 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Diethyl carbonate 3 UN2366 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Diethyl cellosolve, see
Ethylene glycol diethyl ether
Diethyl ether or Ethyl ether 3 UN1155 I 3 T11, TP2 150 201 243 1 L 30 L E 40
Diethyl ketone 3 UN1156 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Diethyl peroxydicarbonate, with Forbidden
more than 27 percent in
solution
Diethyl sulfate 6.1 UN1594 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L C
Diethyl sulfide 3 UN2375 II 3 IB2, T7, TP1, TP13 None 202 243 5 L 60 L E
[[Page 209]]
Diethylamine 3 UN1154 II 3, 8 A3, IB2, N34, T7, TP1 150 202 243 1 L 5 L E 40
2-Diethylaminoethanol 8 UN2686 II 8, 3 B2, IB2, T7, TP2 None 202 243 1 L 30 L A
3-Diethyamino-propylamine. 3 UN2684 III 3, 8 B1, IB3, T4, TP1 150 203 242 5 L 60 L A
+ N, N-Diethylaniline 6.1 UN2432 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Diethylbenzene 3 UN2049 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Diethyldichlorosilane 8 UN1767 II 8, 3 A7, B6, N34, T10, TP2, None 206 243 Forbidden 30 L C 40
TP7, TP13
Diethylene glycol dinitrate Forbidden
Diethyleneglycol dinitrate, 1.1D UN0075 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25, 21E
desensitized with not less
than 25 percent non-volatile
water-insoluble phlegmatizer,
by mass
Diethylenetriamine 8 UN2079 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L A 40, 52
N,N-Diethylethylenediamine 8 UN2685 II 8, 3 IB2, T7, TP2 None 202 243 1 L 30 L A
Diethylgold bromide Forbidden
Diethylthiophosphoryl chloride 8 UN2751 II 8 B2, IB2, T7, TP2 None 212 240 15 kg 50 kg D 12, 25,
40
Difluorochloroethanes, see 1-
Chloro-1,1-difluoroethanes
1,1-Difluoroethane or 2.1 UN1030 ..... 2.1 T50 306 304 314, 315 Forbidden 150 kg B 40
Refrigerant gas R 152a
1,1-Difluoroethylene or 2.1 UN1959 ..... 2.1 ....................... 306 304 None Forbidden 150 kg E 40
Refrigerant gas R 1132a
Difluoromethane or Refrigerant 2.1 UN3252 ..... 2.1 T50 306 302 314, 315 Forbidden 150 kg D 40
gas R 32
Difluorophosphoric acid, 8 UN1768 II 8 A6, A7, B2, IB2, N5, None 202 242 1 L 30 L A 40
anhydrous N34, T8, TP2
2,3-Dihydropyran 3 UN2376 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
1,8-Dihydroxy-2,4,5,7- Forbidden
tetranitroanthraquinone
(chrysamminic acid)
Diiodoacetylene Forbidden
Diisobutyl ketone 3 UN1157 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Diisobutylamine 3 UN2361 III 3, 8 B1, IB3, T4, TP1 150 203 242 5 L 60 L A
Diisobutylene, isomeric 3 UN2050 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
compounds
Diisooctyl acid phosphate 8 UN1902 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
Diisopropyl ether 3 UN1159 II 3 IB2, T4, TP1 150 202 242 5 L 60 L E 40
Diisopropylamine 3 UN1158 II 3, 8 IB2, T7, TP1 150 202 243 1 L 5 L B
Diisopropylbenzene Forbidden
hydroperoxide, with more than
72 percent in solution
Diketene, stabilized 6.1 UN2521 I 6.1, 3 2, 387, B9, B14, B32, None 227 244 Forbidden Forbidden D 25, 26,
T20, TP2, TP13, TP38, 27, 40
TP45
1,2-Dimethoxyethane 3 UN2252 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
1,1-Dimethoxyethane 3 UN2377 II 3 IB2, T7, TP1 150 202 242 5 L 60 L B
Dimethyl carbonate 3 UN1161 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Dimethyl chlorothiophosphate,
see Dimethyl thiophosphoryl
chloride
[[Page 210]]
2,5-Dimethyl-2,5-dihydroperoxy Forbidden
hexane, with more than 82
percent with water
Dimethyl disulfide 3 UN2381 II 3, 6.1 IB2, T7, TP2, TP13, 150 202 242 Forbidden Forbidden B 40
TP39
Dimethyl ether 2.1 UN1033 ..... 2.1 T50 306 304 314, 315 Forbidden 150 kg B 40
Dimethyl-N-propylamine 3 UN2266 II 3, 8 IB2, T7, TP2, TP13 150 202 243 1 L 5 L B 40
Dimethyl sulfate 6.1 UN1595 I 6.1, 8 2, B9, B14, B32, B77, None 227 244 Forbidden Forbidden D 40
T20, TP2, TP13, TP38,
TP45
Dimethyl sulfide 3 UN1164 II 3 IB2, IP8, T7, TP2 150 202 242 5 L 60 L E 40
Dimethyl thiophosphoryl 6.1 UN2267 II 6.1, 8 IB2, T7, TP2 153 202 243 1 L 30 L B 25
chloride
Dimethylamine, anhydrous 2.1 UN1032 ..... 2.1 N87, T50 None 304 314, 315 Forbidden 150 kg D 40
Dimethylamine solution 3 UN1160 II 3, 8 IB2, T7, TP1 150 202 243 1 L 5 L B 52.
2-Dimethylaminoacetonitrile 3 UN2378 II 3, 6.1 IB2, T7, TP1 150 202 243 1 L 60 L A 40, 52
2-Dimethylaminoethanol 8 UN2051 II 8, 3 B2, IB2, T7, TP2 154 202 243 1 L 30 L A
2-Dimethylaminoethyl acrylate 6.1 UN3302 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L D 25
2-Dimethylaminoethyl 6.1 UN2522 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L B 40
methacrylate
N,N-Dimethylaniline 6.1 UN2253 II 6.1 IB1, T7, TP2 153 202 243 5 L 60 L A
2,3-Dimethylbutane 3 UN2457 II 3 IB2, T7, TP1 150 202 242 5 L 60 L E
1, 3-Dimethylbutylamine 3 UN2379 II 3, 8 IB2, T7, TP1 150 202 243 1 L 5 L B 52.
Dimethylcarbamoyl chloride 8 UN2262 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L A 40
Dimethylcyclohexanes 3 UN2263 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
N,N-Dimethylcyclohexylamine 8 UN2264 II 8, 3 B2, IB2, T7, TP2 154 202 243 1 L 30 L A 40
Dimethyldichlorosilane 3 UN1162 II 3, 8 B77, T10, TP2, TP7, None 206 243 Forbidden Forbidden B 40
TP13
Dimethyldiethoxysilane 3 UN2380 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Dimethyldioxanes 3 UN2707 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
N,N-Dimethylformamide 3 UN2265 III 3 B1, IB3, T2, TP2 150 203 242 60 L 220 L A
Dimethylhexane dihydroperoxide Forbidden
(dry)
Dimethylhydrazine, symmetrical 6.1 UN2382 I 6.1, 3 2, B9, B14, B32, B77, None 227 244 Forbidden Forbidden D 40, 52,
T20, TP2, TP13, TP38, 74.
TP45
[[Page 211]]
Dimethylhydrazine, 6.1 UN1163 I 6.1, 3, 2, B7, B9, B14, B32, None 227 244 Forbidden Forbidden D 21, 38,
unsymmetrical 8 T20, TP2, TP13, TP38, 40, 52,
TP45 100.
2,2-Dimethylpropane 2.1 UN2044 ..... 2.1 ....................... 306 304 314, 315 Forbidden 150 kg E 40
Dinitro-o-cresol 6.1 UN1598 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
1,3-Dinitro-5,5-dimethyl Forbidden
hydantoin
Dinitro-7,8-dimethylglycoluril Forbidden
(dry)
1,3-Dinitro-4,5- Forbidden
dinitrosobenzene
1,4-Dinitro-1,1,4,4- Forbidden
tetramethylolbutanetetranitrat
e (dry)
2,4-Dinitro-1,3,5- Forbidden
trimethylbenzene
Dinitroanilines 6.1 UN1596 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 91
Dinitrobenzenes, liquid 6.1 UN1597 II 6.1 11, IB2, T7, TP2 153 202 243 5 L 60 L A 91
............................... ......... ................ III 6.1 11, IB3, T7, TP2 153 203 241 60 L 220 L A 91
Dinitrobenzenes, solid 6.1 UN3443 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 91
Dinitrochlorobenzene, see
Chlorodinitrobenzene
1,2-Dinitroethane Forbidden
1,1-Dinitroethane (dry) Forbidden
Dinitrogen tetroxide 2.3 UN1067 ..... 2.3, 1, B7, B14, B45, B46, None 336 314 Forbidden Forbidden D 40, 89,
5.1, 8 B61, B66, B67, B77, 90
T50, TP21
Dinitroglycoluril or Dingu 1.1D UN0489 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
Dinitromethane Forbidden
Dinitrophenol, dry or wetted 1.1D UN0076 ..... 1.1D, ....................... None 62 None Forbidden Forbidden 04 25, 5E
with less than 15 percent 6.1
water, by mass
Dinitrophenol solutions 6.1 UN1599 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 36
............................... ......... ................ III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A 36
Dinitrophenol, wetted with not 4.1 UN1320 I 4.1, 6.1 23, A8, A19, A20, N41, None 211 None 1 kg 15 kg E 28, 36
less than 15 percent water, by W31
mass
Dinitrophenolates alkali 1.3C UN0077 ..... 1.3C, ....................... None 62 None Forbidden Forbidden 04 25, 5E
metals, dry or wetted with 6.1
less than 15 percent water, by
mass
Dinitrophenolates, wetted with 4.1 UN1321 I 4.1, 6.1 23, A8, A19, A20, N41, None 211 None 1 kg 15 kg E 28, 36
not less than 15 percent W31
water, by mass
Dinitropropylene glycol Forbidden
Dinitroresorcinol, dry or 1.1D UN0078 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25, 5E
wetted with less than 15
percent water, by mass
2,4-Dinitroresorcinol (heavy Forbidden
metal salts of) (dry)
4,6-Dinitroresorcinol (heavy Forbidden
metal salts of) (dry)
Dinitroresorcinol, wetted with 4.1 UN1322 I 4.1 23, A8, A19, A20, N41, None 211 None 1 kg 15 kg E 28, 36
not less than 15 percent W31
water, by mass
[[Page 212]]
3,5-Dinitrosalicylic acid (lead Forbidden
salt) (dry)
Dinitrosobenzene 1.3C UN0406 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25
Dinitrosobenzylamidine and Forbidden
salts of (dry)
2,2-Dinitrostilbene Forbidden
Dinitrotoluenes, liquid 6.1 UN2038 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
Dinitrotoluenes, molten 6.1 UN1600 II 6.1 T7, TP3 None 202 243 Forbidden Forbidden C
Dinitrotoluenes, solid 6.1 UN3454 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
1,9-Dinitroxy pentamethylene- Forbidden
2,4, 6,8-tetramine (dry)
Dioxane 3 UN1165 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Dioxolane 3 UN1166 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B 40
Dipentene 3 UN2052 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Diphenylamine chloroarsine 6.1 UN1698 I 6.1 T6, TP33, W31 None 201 None Forbidden Forbidden D 40
Diphenylchloroarsine, liquid 6.1 UN1699 I 6.1 A8, B14, B32, N33, N34, None 201 243 Forbidden 30 L D 40
T14, TP2, TP13, TP27,
W31
Diphenylchloroarsine, solid 6.1 UN3450 I 6.1 IB7, IP1, T6, TP33, W31 None 211 242 5 kg 50 kg D 40
Diphenyldichlorosilane 8 UN1769 II 8 A7, B2, N34, T10, TP2, None 206 242 Forbidden 30 L C 40
TP7, TP13
Diphenylmethyl bromide 8 UN1770 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg D 40
Dipicryl sulfide, dry or wetted 1.1D UN0401 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
with less than 10 percent
water, by mass
Dipicryl sulfide, wetted with 4.1 UN2852 I 4.1 162, A2, N41, N84, W31 None 211 None Forbidden 0.5 kg D 28, 36
not less than 10 percent
water, by mass
Dipicrylamine, see
Hexanitrodiphenylamine
Dipropionyl peroxide, with more Forbidden
than 28 percent in solution
Di-n-propyl ether 3 UN2384 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Dipropyl ketone 3 UN2710 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Dipropylamine 3 UN2383 II 3, 8 IB2, T7, TP1 150 202 243 1 L 5 L B
G Disinfectant, liquid, 8 UN1903 I 8 A6, A7, B10, T14, TP2, None 201 243 0.5 L 2.5 L B
corrosive, n.o.s. TP27
G Disinfectants, liquid, 8 UN1903 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L B
corrosive n.o.s.
............................... ......... ................ III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
[[Page 213]]
G Disinfectants, liquid, toxic, 6.1 UN3142 I 6.1 A4, T14, TP2, TP27 None 201 243 1 L 30 L A 40
n.o.s.
............................... ......... ................ II 6.1 IB2, T11, TP2, TP27 153 202 243 5 L 60 L A 40
............................... ......... ................ III 6.1 IB3, T7, TP1, TP28 153 203 241 60 L 220 L A 40
G Disinfectants, solid, toxic, 6.1 UN1601 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 40
n.o.s.
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
Disodium trioxosilicate 8 UN3253 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A 52.
G Dispersant gases, n.o.s. see
Refrigerant gases, n.o.s.
Divinyl ether, stabilized 3 UN1167 I 3 387, A7, T11, TP2 None 201 243 1 L 30 L E 25, 40
Dodecyltrichlorosilane 8 UN1771 II 8 A7, B2, B6, N34, T10, None 206 242 Forbidden 30 L C 40
TP2, TP7, TP13
Dry ice, see Carbon dioxide,
solid
G Dyes, liquid, corrosive, n.o.s. 8 UN2801 I 8 11, A6, B10, T14, TP2, None 201 243 0.5 L 2.5 L A
or Dye intermediates, liquid, TP27
corrosive, n.o.s
II 8 11, B2, IB2, T11, TP2, 154 202 242 1 L 30 L A
TP27
III 8 11, IB3, T7, TP1, TP28 154 203 241 5 L 60 L A
G Dyes, liquid, toxic, n.o.s. or 6.1 UN1602 I 6.1 ....................... None 201 243 1 L 30 L A
Dye intermediates, liquid,
toxic, n.o.s.
............................... ......... ................ II 6.1 IB2 153 202 243 5 L 60 L A
............................... ......... ................ III 6.1 IB3 153 203 241 60 L 220 L A
G Dyes, solid, corrosive, n.o.s. 8 UN3147 I 8 IB7, IP1, T6, TP33 None 211 242 1 kg 25 kg A
or Dye intermediates, solid,
corrosive, n.o.s.
............................... ......... ................ II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A
............................... ......... ................ III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
G Dyes, solid, toxic, n.o.s. or 6.1 UN3143 I 6.1 A5, IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A
Dye intermediates, solid,
toxic, n.o.s.
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Dynamite, see Explosive,
blasting, type A
Electrolyte (acid or alkali)
for batteries, see Battery
fluid, acid or Battery fluid,
alkali
G Elevated temperature liquid, 3 UN3256 III 3 IB1, T3, TP3, TP29 None None 247 Forbidden Forbidden A
flammable, n.o.s., with flash
point above 37.8 C, at or
above its flash point
G Elevated temperature liquid, 9 UN3257 III 9 IB1, T3, TP3, TP29 None None 247 Forbidden Forbidden A 85
n.o.s., at or above 100 C and
below its flash point
(including molten metals,
molten salts, etc.)
G Elevated temperature solid, 9 UN3258 III 9 ....................... 247 (h)(4) None 247 Forbidden Forbidden A 85
n.o.s., at or above 240 C, see
Sec. 173.247(h)(4)
[[Page 214]]
Engine, internal combustion, 2.1 UN3529 ..... 2.1 135, A200 220 220 220 Forbidden No limit E
flammable gas powered or
Engine, fuel cell, flammable
gas powered or Machinery,
internal combustion, flammable
gas powered or Machinery, fuel
cell, flammable gas powered
Engine, internal combustion, 3 UN3528 ..... 3 135, A200 220 220 220 No limit No limit E 149
flammable liquid powered or
Engine, fuel cell, flammable
liquid powered or Machinery,
internal combustion, flammable
liquid powered or Machinery,
fuel cell, flammable liquid
powered
Engine, internal combustion or 9 UN3530 ..... 9 135, A200 220 220 220 No limit No limit A
Machinery, internal combustion
G Environmentally hazardous 9 UN3082 III 9 8, 146, 173, 335, IB3, 155 203 241 No limit No limit A
substance, liquid, n.o.s. T4, TP1, TP29
G Environmentally hazardous 9 UN3077 III 9 8, 146, 335, 384, A112, 155 213 240 No limit No limit A
substance, solid, n.o.s B54, B120, IB8, IP3,
N20, N91, T1, TP33
Epibromohydrin 6.1 UN2558 I 6.1, 3 T14, TP2, TP13 None 201 243 Forbidden Forbidden D 40
+ Epichlorohydrin 6.1 UN2023 II 6.1, 3 IB2, T7, TP2, TP13 153 202 243 5 L 60 L A 40
1,2-Epoxy-3-ethoxypropane 3 UN2752 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Esters, n.o.s. 3 UN3272 II 3 IB2, T7, TP1, TP8, TP28 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T4, TP1, TP29 150 203 242 60 L 220 L A
Etching acid, liquid, n.o.s.,
see Hydrofluoric acid, etc
Ethane 2.1 UN1035 ..... 2.1 ....................... 306 304 302 Forbidden 150 kg E 40
D Ethane-Propane mixture, 2.1 NA1961 ..... 2.1 T75, TP5 None 316 314, 315 Forbidden Forbidden D 40
refrigerated liquid
Ethane, refrigerated liquid 2.1 UN1961 ..... 2.1 T75, TP5 None None 315 Forbidden Forbidden D 40
Ethanol amine dinitrate Forbidden
Ethanol and gasoline mixture or 3 UN3475 II 3 144, 177, IB2, T4, TP1 150 202 242 5 L 60 L E
Ethanol and motor spirit
mixture or Ethanol and petrol
mixture, with more than 10%
ethanol
[[Page 215]]
Ethanol or Ethyl alcohol or 3 UN1170 II 3 24, IB2, T4, TP1 4b, 150 202 242 5 L 60 L A
Ethanol solutions or Ethyl
alcohol solutions
......... ................ III 3 24, B1, IB3, T2, TP1 4b, 150 203 242 60 L 220 L A
Ethanolamine or Ethanolamine 8 UN2491 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A 52.
solutions
Ether, see Diethyl ether
Ethers, n.o.s. 3 UN3271 II 3 IB2, T7, TP1, TP8, TP28 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T4, TP1, TP29 150 203 242 60 L 220 L A
Ethyl acetate 3 UN1173 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Ethyl acrylate, stabilized 3 UN1917 II 3 387, IB2, T4, TP1, TP13 150 202 242 5 L 60 L C 25, 40
Ethyl alcohol, see Ethanol
Ethyl aldehyde, see
Acetaldehyde
Ethyl amyl ketone 3 UN2271 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
N-Ethylbenzyltoluidines, solid 6.1 UN3460 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
N-Ethyl-N-benzylaniline 6.1 UN2274 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Ethyl borate 3 UN1176 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Ethyl bromide 6.1 UN1891 II 6.1 IB2, IP8, T7, TP2, TP13 153 202 243 5 L 60 L B 40, 85
Ethyl bromoacetate 6.1 UN1603 II 6.1, 3 IB2, T7, TP2 None 202 243 Forbidden Forbidden D 40
Ethyl butyl ether 3 UN1179 II 3 B1, IB2, T4, TP1 150 202 242 5 L 60 L B
Ethyl butyrate 3 UN1180 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Ethyl chloride 2.1 UN1037 ..... 2.1 B77, N86, T50 None 322 314, 315 Forbidden 150 kg B 40
Ethyl chloroacetate 6.1 UN1181 II 6.1, 3 IB2, T7, TP2 153 202 243 5 L 60 L A
Ethyl chloroformate 6.1 UN1182 I 6.1, 3, 2, B9, B14, B32, N34, None 227 244 Forbidden Forbidden D 21, 40,
8 T20, TP2, TP13, TP38, 100
TP45
Ethyl 2-chloropropionate 3 UN2935 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
+ Ethyl chlorothioformate 8 UN2826 II 8, 6.1, 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden A 40
3 TP2, TP38, TP45
Ethyl crotonate 3 UN1862 II 3 IB2, T4, TP2 150 202 242 5 L 60 L B
Ethyl ether, see Diethyl ether
Ethyl fluoride or Refrigerant 2.1 UN2453 ..... 2.1 ....................... 306 304 314, 315 Forbidden 150 kg E 40
gas R161
Ethyl formate 3 UN1190 II 3 IB2, T4, TP1 150 202 242 5 L 60 L E
Ethyl hydroperoxide Forbidden
Ethyl isobutyrate 3 UN2385 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
+ Ethyl isocyanate 6.1 UN2481 I 6.1, 3 1, B9, B14, B30, T20, None 226 244 Forbidden Forbidden D 40, 52
TP2, TP13, TP38, TP44
Ethyl lactate 3 UN1192 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Ethyl mercaptan 3 UN2363 I 3 A6, T11, TP2, TP13 None 201 243 Forbidden 30 L E 95, 102
Ethyl methacrylate, stabilized 3 UN2277 II 3 387, IB2, T4, TP1 150 202 242 5 L 60 L C 25
Ethyl methyl ether 2.1 UN1039 ..... 2.1 ....................... None 201 314, 315 Forbidden 150 kg B 40
Ethyl methyl ketone or Methyl 3 UN1193 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
ethyl ketone
Ethyl nitrite solutions 3 UN1194 I 3, 6.1 ....................... None 201 None Forbidden Forbidden E 40, 105
Ethyl orthoformate 3 UN2524 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Ethyl oxalate 6.1 UN2525 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Ethyl perchlorate Forbidden
[[Page 216]]
D Ethyl phosphonothioic 6.1 NA2927 I 6.1, 8 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40
dichloride, anhydrous TP4, TP12, TP13, TP38,
TP45
D Ethyl phosphonous dichloride, 6.1 NA2845 I 6.1, 4.2 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 18
anhydrous pyrophoric liquid TP4, TP12, TP13, TP38,
TP45
D Ethyl phosphorodichloridate 6.1 NA2927 I 6.1, 8 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40
TP4, TP12, TP13, TP38,
TP45
Ethyl propionate 3 UN1195 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Ethyl propyl ether 3 UN2615 II 3 IB2, T4, TP1 150 202 242 5 L 60 L E
Ethyl silicate, see Tetraethyl
silicate
Ethylacetylene, stabilized 2.1 UN2452 ..... 2.1 387, N88 None 304 314, 315 Forbidden 150 kg B 25, 40
Ethylamine 2.1 UN1036 ..... 2.1 B77, N87, T50 None 321 314, 315 Forbidden 150 kg D 40
Ethylamine, aqueous solution 3 UN2270 II 3, 8 IB2, T7, TP1 150 202 243 1 L 5 L B 40, 52.
with not less than 50 percent
but not more than 70 percent
ethylamine
N-Ethylaniline 6.1 UN2272 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A 52, 74
2-Ethylaniline 6.1 UN2273 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A 52, 74
Ethylbenzene 3 UN1175 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
N-Ethylbenzyltoluidines liquid 6.1 UN2753 III 6.1 IB3, T7, TP1 153 203 241 60 L 220 L A
2-Ethylbutanol 3 UN2275 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
2-Ethylbutyl acetate 3 UN1177 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
2-Ethylbutyraldehyde 3 UN1178 II 3 B1, IB2, T4, TP1 150 202 242 5 L 60 L B
Ethyldichloroarsine 6.1 UN1892 I 6.1 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40
TP2, TP13, TP38, TP45
Ethyldichlorosilane 4.3 UN1183 I 4.3, 8, A2, A3, A7, N34, T14, None 201 244 Forbidden 1 L D 21, 40,
3 TP2, TP7, TP13, W31 49, 100
Ethylene, acetylene and 2.1 UN3138 ..... 2.1 T75, TP5 None 304 314, 315 Forbidden Forbidden D 40, 57
propylene in mixture,
refrigerated liquid with at
least 71.5 percent ethylene
with not more than 22.5
percent acetylene and not more
than 6 percent propylene
Ethylene chlorohydrin 6.1 UN1135 I 6.1, 3 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40
TP2, TP13, TP38, TP45
[[Page 217]]
Ethylene 2.1 UN1962 ..... 2.1 ....................... 306 304 302 Forbidden 150 kg E 40
Ethylene diamine diperchlorate Forbidden
Ethylene dibromide 6.1 UN1605 I 6.1 2, B9, B14, B32, B77, None 227 244 Forbidden Forbidden D 40
T20, TP2, TP13, TP38,
TP45
Ethylene dibromide and methyl
bromide liquid mixtures, see
Methyl bromide and ethylene
dibromide, liquid mixtures
Ethylene dichloride 3 UN1184 II 3, 6.1 IB2, N36, T7, TP1 150 202 243 1 L 60 L B 40
Ethylene glycol diethyl ether 3 UN1153 II 3 IB2, T4, TP1 150 202 242 5 L 60 L A
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Ethylene glycol dinitrate Forbidden
Ethylene glycol monoethyl ether 3 UN1171 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Ethylene glycol monoethyl ether 3 UN1172 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
acetate
Ethylene glycol monomethyl 3 UN1188 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
ether
Ethylene glycol monomethyl 3 UN1189 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
ether acetate
Ethylene oxide and carbon 2.3 UN3300 ..... 2.3, 2.1 4 None 304 314, 315 Forbidden Forbidden D 40
dioxide mixture with more than
87 percent ethylene oxide
Ethylene oxide and carbon 2.1 UN1041 ..... 2.1 T50 306 304 314, 315 Forbidden 25 kg B 40
dioxide mixtures with more
than 9 percent but not more
than 87 percent ethylene oxide
Ethylene oxide and carbon 2.2 UN1952 ..... 2.2 ....................... 306 304 314, 315 75 kg 150 kg A
dioxide mixtures with not more
than 9 percent ethylene oxide
Ethylene oxide and 2.2 UN3297 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
chlorotetrafluoroethane
mixture with not more than 8.8
percent ethylene oxide
Ethylene oxide and 2.2 UN3070 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
dichlorodifluoromethane
mixture, with not more than
12.5 percent ethylene oxide
Ethylene oxide and 2.2 UN3298 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
pentafluoroethane mixture with
not more than 7.9 percent
ethylene oxide
Ethylene oxide and propylene 3 UN2983 I 3, 6.1 5, A11, N4, N34, T14, None 201 243 Forbidden 30 L E 40
oxide mixtures, with not more TP2, TP7, TP13
than 30 percent ethylene oxide
Ethylene oxide and 2.2 UN3299 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
tetrafluoroethane mixture with
not more than 5.6 percent
ethylene oxide
[[Page 218]]
Ethylene oxide or Ethylene 2.3 UN1040 ..... 2.3, 2.1 4, 342, T50, TP20 None 323 323 Forbidden Forbidden D 40
oxide with nitrogen up to a
total pressure of 1 MPa (10
bar) at 50 degrees C
Ethylene, refrigerated liquid 2.1 UN1038 ..... 2.1 T75, TP5 None 316 318, 319 Forbidden Forbidden D 40
(cryogenic liquid)
Ethylenediamine 8 UN1604 II 8, 3 IB2, T7, TP2 154 202 243 1 L 30 L A 40, 52.
Ethyleneimine, stabilized 6.1 UN1185 I 6.1, 3 1, 387, B9, B14, B30, None 226 244 Forbidden Forbidden D 25, 40
B77, N25, N32, T22,
TP2, TP13, TP38, TP44
Ethylhexaldehyde, see Octyl
aldehydes etc
2-Ethylhexyl chloroformate 6.1 UN2748 II 6.1, 8 IB2, T7, TP2, TP13 153 202 243 1 L 30 L A 12, 13,
25, 40
2-Ethylhexylamine 3 UN2276 III 3, 8 B1, IB3, T4, TP1 150 203 242 5 L 60 L A 40
Ethylphenyldichlorosilane 8 UN2435 II 8 A7, B2, N34, T10, TP2, None 206 242 Forbidden 30 L C
TP7, TP13
1-Ethylpiperidine 3 UN2386 II 3, 8 IB2, T7, TP1 150 202 243 1 L 5 L B 52.
N-Ethyltoluidines 6.1 UN2754 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
Ethyltrichlorosilane 3 UN1196 II 3, 8 A7, N34, T10, TP2, TP7, None 206 243 Forbidden 5 L B 40
TP13
Etiologic agent, see Infectious
substances, etc
Explosive articles, see
Articles, explosive , n.o.s.
etc
Explosive, blasting, type A 1.1D UN0081 ..... 1.1D 148 None 62 None Forbidden Forbidden 04 25,
19E,
21E
Explosive, blasting, type B 1.1D UN0082 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25, 19E
Explosive, blasting, type B or 1.5D UN0331 ..... 1.5D 105, 106, 148 None 62 None Forbidden Forbidden 03 25, 19E
Agent blasting, Type B
Explosive, blasting, type C 1.1D UN0083 ..... 1.1D 123 None 62 None Forbidden Forbidden 04 25, 22E
Explosive, blasting, type D 1.1D UN0084 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
Explosive, blasting, type E 1.1D UN0241 ..... 1.1D 148 None 62 None Forbidden Forbidden 04 25, 19E
[[Page 219]]
Explosive, blasting, type E or 1.5D UN0332 ..... 1.5D 105, 106, 148 None 62 None Forbidden Forbidden 03 25, 19E
Agent blasting, Type E
Explosive, forbidden. See Sec. Forbidden
173.54
Explosive substances, see
Substances, explosive, n.o.s.
etc
Explosives, slurry, see
Explosive, blasting, type E
Explosives, water gels, see
Explosive, blasting, type E
Extracts, aromatic, liquid 3 UN1169 II 3 149, IB2, T4, TP1, TP8 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Extracts, flavoring, liquid 3 UN1197 II 3 149, IB2, T4, TP1, TP8 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Fabric with animal or vegetable
oil, see Fibers or fabrics,
etc
Ferric arsenate 6.1 UN1606 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Ferric arsenite 6.1 UN1607 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Ferric chloride, anhydrous 8 UN1773 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
Ferric chloride, solution 8 UN2582 III 8 B15, IB3, T4, TP1 154 203 241 5 L 60 L A
Ferric nitrate 5.1 UN1466 III 5.1 A1, A29, IB8, IP3, T1, 152 213 240 25 kg 100 kg A
TP33
Ferrocerium 4.1 UN1323 II 4.1 59, A19, IB8, IP2, IP4, 151 212 240 15 kg 50 kg A 13,
T3, TP33, W100 147,
148
Ferrosilicon with 30 percent or 4.3 UN1408 III 4.3, 6.1 A1, A19, B6, IB8, IP4, 151 213 240 25 kg 100 kg A 13, 40,
more but less than 90 percent IP7, T1, TP33, W100 52, 53,
silicon 85,
103,
148
Ferrous arsenate 6.1 UN1608 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
D Ferrous chloride, solid 8 NA1759 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A
D Ferrous chloride, solution 8 NA1760 II 8 B3, IB2, T11, TP2, TP27 154 202 242 1 L 30 L B 40
Ferrous metal borings or 4.2 UN2793 III 4.2 A1, A19, B134, IB8, None 213 241 25 kg 100 kg A 13, 148
Ferrous metal shavings or IP3, IP21, IP7, W100
Ferrous metal turnings or
Ferrous metal cuttings in a
form liable to self-heating
Fertilizer ammoniating solution 2.2 UN1043 ..... 2.2 N87 306 304 314, 315 Forbidden 150 kg E 40
with free ammonia
A I W Fibers, animal or Fibers, 4.2 UN1372 III 4.2 ....................... 151 213 240 Forbidden Forbidden A
vegetable burnt, wet or damp
IW Fibers, vegetable, dry 4.1 UN3360 III 4.1 137 151 213 240 No Limit No Limit A
A W Fibers or Fabrics, animal or 4.2 UN1373 III 4.2 137, IB8, IP3, T1, None 213 241 Forbidden Forbidden A
vegetable or Synthetic, n.o.s. TP33, W31
with animal or vegetable oil
Fibers or Fabrics impregnated 4.1 UN1353 III 4.1 A1, IB8, IP3 None 213 240 25 kg 100 kg D
with weakly nitrated
nitrocellulose, n.o.s.
[[Page 220]]
Films, nitrocellulose base,
from which gelatine has been
removed; film scrap, see
Celluloid scrap
Films, nitrocellulose base, 4.1 UN1324 III 4.1 ....................... None 183 None 25 kg 100 kg D 28
gelatine coated (except scrap)
Fire extinguisher charges, 8 UN1774 II 8 N41 154 202 None 1 L 30 L A
corrosive liquid
Fire extinguisher charges,
expelling, explosive, see
Cartridges, power device
Fire extinguishers containing 2.2 UN1044 ..... 2.2 110 309 309 None 75 kg 150 kg A .......
compressed or liquefied gas
Firelighters, solid with 4.1 UN2623 III 4.1 A1, A19 None 213 None 25 kg 100 kg A 52
flammable liquid
Fireworks 1.1G UN0333 ..... 1.1G 108 None 62 None Forbidden Forbidden 03 25
Fireworks 1.2G UN0334 ..... 1.2G 108 None 62 None Forbidden Forbidden 03 25
Fireworks 1.3G UN0335 ..... 1.3G 108 None 62 None Forbidden Forbidden 03 25
Fireworks 1.4G UN0336 ..... 1.4G 108, 200 None 62 None Forbidden 75 kg 02 25
Fireworks 1.4S UN0337 ..... 1.4S 108 None 62 None 25 kg 100 kg 01 25
First aid kits 9 UN3316 II 9 15 161 161 None 10 kg 10 kg A
First aid kits 9 UN3316 III 9 15 161 161 None 10 kg 10 kg A
A W Fish meal, stabilized or Fish 9 UN2216 III None 155, IB8, IP3, T1, TP33 155 218 218 Forbidden Forbidden B 25, 88,
scrap, stabilized 122,
128
Fish meal, unstablized or Fish 4.2 UN1374 II 4.2 155, A1, A19, IB8, IP2, None 212 241 Forbidden Forbidden B 18, 25,
scrap, unstabilized IP4, T3, TP33, W31, W40 128
Flammable compressed gas, see
Compressed or Liquefied gas,
flammable, etc
Flammable compressed gas (small
receptacles not fitted with a
dispersion device, not
refillable), see Receptacles,
etc
Flammable gas in lighters, see
Lighters or lighter refills,
cigarettes, containing
flammable gas
[[Page 221]]
G Flammable liquid, toxic, 3 UN3286 I 3, 6.1, T14, TP2, TP13, TP27 None 201 243 Forbidden 2.5 L E 21, 40,
corrosive, n.o.s. 8 100
............................... ......... ................ II 3, 6.1, IB2, T11, TP2, TP13, 150 202 243 1 L 5 L B 21, 40,
8 TP27 100
G Flammable liquids, corrosive, 3 UN2924 I 3, 8 T14, TP2 None 201 243 0.5 L 2.5 L E 40
n.o.s.
............................... ......... ................ II 3, 8 IB2, T11, TP2, TP27 150 202 243 1 L 5 L B 40
............................... ......... ................ III 3, 8 B1, IB3, T7, TP1, TP28 150 203 242 5 L 60 L A 40
G Flammable liquids, n.o.s. 3 UN1993 I 3 T11, TP1, TP27 150 201 243 1 L 30 L E
............................... ......... ................ II 3 IB2, T7, TP1, TP8, TP28 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, B52, IB3, T4, TP1, 150 203 242 60 L 220 L A
TP29
G Flammable liquids, toxic, 3 UN1992 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L E 40
n.o.s.
............................... ......... ................ II 3, 6.1 IB2, T7, TP2, TP13 150 202 243 1 L 60 L B 40
............................... ......... ................ III 3, 6.1 B1, IB3, T7, TP1, TP28 150 203 242 60 L 220 L A
G Flammable solid, corrosive, 4.1 UN3180 II 4.1, 8 A1, IB6, IP2, T3, TP33 151 212 242 15 kg 50 kg D 40
inorganic, n.o.s.
............................... ......... ................ III 4.1, 8 A1, IB6, T1, TP33 151 213 242 25 kg 100 kg D 40
G Flammable solid, inorganic, 4.1 UN3178 II 4.1 A1, IB8, IP2, IP4, T3, 151 212 240 15 kg 50 kg B
n.o.s. TP33
............................... ......... ................ III 4.1 A1, IB8, IP3, T1, TP33 151 213 240 25 kg 100 kg B
G Flammable solid, organic, 4.1 UN3176 II 4.1 IB1, T3, TP3, TP26 151 212 240 Forbidden Forbidden C
molten, n.o.s.
............................... ......... ................ III 4.1 IB1, T1, TP3, TP26 151 213 240 Forbidden Forbidden C
G Flammable solid, oxidizing, 4.1 UN3097 II 4.1, 5.1 131 None 214 214 Forbidden Forbidden E 40
n.o.s.
............................... ......... ................ III 4.1, 5.1 131, T1, TP33 None 214 214 Forbidden Forbidden D 40
G Flammable solid, toxic, 4.1 UN3179 II 4.1, 6.1 A1, IB6, IP2, T3, TP33 151 212 242 15 kg 50 kg B 40
inorganic, n.o.s.
............................... ......... ................ III 4.1, 6.1 A1, IB6, T1, TP33 151 213 242 25 kg 100 kg B 40
G Flammable solids, corrosive, 4.1 UN2925 II 4.1, 8 A1, IB6, IP2, T3, TP33 None 212 242 15 kg 50 kg D 40
organic, n.o.s.
............................... ......... ................ III 4.1, 8 A1, IB6, T1, TP33 151 213 242 25 kg 100 kg D 40
G Flammable solids, organic, 4.1 UN1325 II 4.1 A1, IB8, IP2, IP4, T3, 151 212 240 15 kg 50 kg B
n.o.s. TP33
............................... ......... ................ III 4.1 A1, IB8, IP3, T1, TP33 151 213 240 25 kg 100 kg B
G Flammable solids, toxic, 4.1 UN2926 II 4.1, 6.1 A1, IB6, IP2, T3, TP33 151 212 242 15 kg 50 kg B 40
organic, n.o.s.
............................... ......... ................ III 4.1, 6.1 A1, IB6, T1, TP33 151 213 242 25 kg 100 kg B 40
Flares, aerial 1.3G UN0093 ..... 1.3G ....................... None 62 None Forbidden 75 kg 03 25
Flares, aerial 1.4G UN0403 ..... 1.4G ....................... None 62 None Forbidden 75 kg 02 25
Flares, aerial 1.4S UN0404 ..... 1.4S ....................... None 62 None 25 kg 100 kg 01 25
Flares, aerial 1.1G UN0420 ..... 1.1G ....................... None 62 None Forbidden Forbidden 03 25
Flares, aerial 1.2G UN0421 ..... 1.2G ....................... None 62 None Forbidden Forbidden 03 25
Flares, airplane, see Flares,
aerial
Flares, signal, see Cartridges,
signal
Flares, surface 1.3G UN0092 ..... 1.3G ....................... None 62 None Forbidden 75 kg 03 25
[[Page 222]]
Flares, surface 1.1G UN0418 ..... 1.1G ....................... None 62 None Forbidden Forbidden 03 25
Flares, surface 1.2G UN0419 ..... 1.2G ....................... None 62 None Forbidden Forbidden 03 25
Flares, water-activated, see
Contrivances, water-activated,
etc
Flash powder 1.1G UN0094 ..... 1.1G ....................... None 62 None Forbidden Forbidden 03 25
Flash powder 1.3G UN0305 ..... 1.3G ....................... None 62 None Forbidden Forbidden 03 25
Flue dusts, poisonous, see
Arsenical dust
Fluoric acid, see Hydrofluoric
acid, etc
Fluorine, compressed 2.3 UN1045 ..... 2.3, 1, N86 None 302 None Forbidden Forbidden D 40, 89,
5.1, 8 90
Fluoroacetic acid 6.1 UN2642 I 6.1 IB7, IP1, T6, TP33 None 211 242 1 kg 15 kg E
Fluoroanilines 6.1 UN2941 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Fluorobenzene 3 UN2387 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Fluoroboric acid 8 UN1775 II 8 A6, A7, B2, B15, IB2, 154 202 242 1 L 30 L A
N3, N34, T7, TP2
Fluorophosphoric acid anhydrous 8 UN1776 II 8 A6, A7, B2, IB2, N3, None 202 242 1 L 30 L A
N34, T8, TP2
G Fluorosilicates, n.o.s 6.1 UN2856 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 52
Fluorosilicic acid 8 UN1778 II 8 A6, A7, B2, B15, IB2, None 202 242 1 L 30 L A
N3, N34, T8, TP2
Fluorosulfonic acid 8 UN1777 I 8 A3, A6, A7, A10, B6, None 201 243 0.5 L 2.5 L D 40
B10, N3, N36, T10, TP2
Fluorotoluenes 3 UN2388 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B 40
Forbidden materials. See Sec. Forbidden
173.21
Formaldehyde solutions, 3 UN1198 III 3, 8 176, B1, IB3, T4, TP1 150 203 242 5 L 60 L A 40
flammable
Formaldehyde solutions (with
not less than 10% and less
than 25% formaldehyde), see
Aviation regulated liquid,
n.o.s. or Other regulated
substances, liquid, n.o.s.
Formaldehyde solutions, with 8 UN2209 III 8 IB3, T4, TP1 154 203 241 5 L 60
not less than 25 percent
formaldehyde
Formalin, see Formaldehyde,
solutions
[[Page 223]]
Formic acid with not less than 8 UN3412 II 8 IB2, T7, TP2 154 202 242 1 L 30 L A 40.
10% but not more than 85% acid
by mass
Formic acid with not less than 8 UN3412 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A 40
5% but less than 10% acid by
mass
Formic acid with more than 85% 8 UN1779 II 8, 3 B2, B28, IB2, T7, TP2 154 202 242 1 L 30 L A 40.
acid by mass
Fracturing devices, explosive, 1.1D UN0099 ..... 1.1D ....................... None 62 62 Forbidden Forbidden 04 25
without detonators for oil
wells
Fuel, aviation, turbine engine 3 UN1863 I 3 144, T11, TP1, TP8, 150 201 243 1 L 30 L E
TP28
............................... ......... ................ II 3 144, IB2, T4, TP1, TP8 150 202 242 5 L 60 L B
............................... ......... ................ III 3 144, B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Fuel cell cartridges or Fuel 8 UN3477 ..... 8 328 230 230 230 5 kg 50 kg A
cell cartridges contained in
equipment or Fuel cell
cartridges packed with
equipment, containing
corrosive substances
Fuel cell cartridges or Fuel 3 UN3473 ..... 3 328 230 230 230 5 kg 50 kg A
cell cartridges contained in
equipment or Fuel cell
cartridges packed with
equipment, containing
flammable liquids
Fuel cell cartridges or Fuel 2.1 UN3479 ..... 2.1 328 230 230 230 1 kg 15 kg B
cell cartridges contained in
equipment or Fuel cell
cartridges packed with
equipment, containing hydrogen
in metal hydride
Fuel cell cartridges or Fuel 2.1 UN3478 ..... 2.1 328 230 230 230 1 kg 15 kg B
cell cartridges contained in
equipment or Fuel cell
cartridges packed with
equipment, containing
liquefied flammable gas
Fuel cell cartridges or Fuel 4.3 UN3476 ..... 4.3 328 230 230 230 5 kg 50 kg A 13, 148
cell cartridges contained in
equipment or Fuel cell
cartridges packed with
equipment, containing water-
reactive substances
D Fuel oil (No. 1, 2, 4, 5, or 6) 3 NA1993 III 3 144, B1, IB3, T4, TP1, 150 203 242 60 L 220 L A
TP29
Fuel system components
(including fuel control units
(FCU), carburetors, fuel
lines, fuel pumps) see
Dangerous Goods in Apparatus
or Dangerous Goods in
Machinery
Fulminate of mercury (dry) Forbidden
Fulminate of mercury, wet, see
Mercury fulminate, etc
Fulminating gold Forbidden
[[Page 224]]
Fulminating mercury Forbidden
Fulminating platinum Forbidden
Fulminating silver Forbidden
Fulminic acid Forbidden
Fumaryl chloride 8 UN1780 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L C 8, 40
Fumigated lading, see Sec.
Sec. 172.302(g), 173.9 and
176.76(h)
Fumigated transport vehicle or ........ ............ .......... ........ ..........
freight container see Sec.
173.9
Furaldehydes 6.1 UN1199 II 6.1, 3 IB2, T7, TP2 153 202 243 5 L 60 L A
Furan 3 UN2389 I 3 T12, TP2, TP13 None 201 243 1 L 30 L E 40
Furfuryl alcohol 6.1 UN2874 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A 52, 74
Furfurylamine 3 UN2526 III 3, 8 B1, IB3, T4, TP1 150 203 242 5 L 60 L A 40
Fuse, detonating, metal clad,
see Cord, detonating, metal
clad
Fuse, detonating, mild effect,
metal clad, see Cord,
detonating, mild effect, metal
clad
Fuse, igniter tubular metal 1.4G UN0103 ..... 1.4G ....................... None 62 None Forbidden 75 kg 02 25
clad
Fuse, non-detonating 1.3G UN0101 ..... 1.3G ....................... None 62 None Forbidden Forbidden 03 25
instantaneous or quickmatch
Fuse, safety 1.4S UN0105 ..... 1.4S ....................... None 62 None 25 kg 100 kg 01 25
D Fusee (railway or highway) 4.1 NA1325 II 4.1 381 None 184 None 15 kg 50 kg B
Fusel oil 3 UN1201 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Fuses, tracer, see Tracers for
ammunition
Fuzes, combination, percussion
and time, see Fuzes,
detonating (UN0257, UN0367);
Fuzes, igniting (UN0317,
UN0368)
Fuzes, detonating 1.1B UN0106 ..... 1.1B ....................... None 62 None Forbidden Forbidden 05 25
Fuzes, detonating 1.2B UN0107 ..... 1.2B ....................... None 62 None Forbidden Forbidden 05 25
Fuzes, detonating 1.4B UN0257 ..... 1.4B 116 None 62 None Forbidden 75 kg 05 25
Fuzes, detonating 1.4S UN0367 ..... 1.4S 116 None 62 None 25 kg 100 kg 01 25
Fuzes, detonating, with 1.1D UN0408 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
protective features
[[Page 225]]
Fuzes, detonating, with 1.2D UN0409 ..... 1.2D ....................... None 62 None Forbidden Forbidden 04 25
protective features
Fuzes, detonating, with 1.4D UN0410 ..... 1.4D 116 None 62 None Forbidden 75 kg 02 25
protective features
Fuzes, igniting 1.3G UN0316 ..... 1.3G ....................... None 62 None Forbidden Forbidden 03 25
Fuzes, igniting 1.4G UN0317 ..... 1.4G ....................... None 62 None Forbidden 75 kg 02 25
Fuzes, igniting 1.4S UN0368 ..... 1.4S ....................... None 62 None 25 kg 100 kg 01 25
Galactsan trinitrate Forbidden
Gallium 8 UN2803 III 8 T1, TP33 None 162 240 20 kg 20 kg B 25
Gas cartridges, (flammable) 2.1 UN2037 ..... 2.1 ....................... 306 304 None 1 kg 15 kg B 40
without a release device, non-
refillable
D Gas identification set 2.3 NA9035 ..... 2.3 6 None 194 None Forbidden Forbidden D
Gas oil 3 UN1202 III 3 144, B1, IB3, T2, TP1 150 203 242 60 L 220 L A
G Gas, refrigerated liquid, 2.1 UN3312 ..... 2.1 T75, TP5 None 316 318 Forbidden Forbidden D 40
flammable, n.o.s. (cryogenic
liquid)
G Gas, refrigerated liquid, 2.2 UN3158 ..... 2.2 T75, TP5 320 316 318 50 kg 500 kg D
n.o.s. (cryogenic liquid)
G Gas, refrigerated liquid, 2.2 UN3311 ..... 2.2, 5.1 T75, TP5, TP22 320 316 318 Forbidden Forbidden D
oxidizing, n.o.s. (cryogenic
liquid)
Gas sample, non-pressurized, 2.1 UN3167 ..... 2.1 ....................... 306 302, 304 None 1 L 5 L D
flammable, n.o.s., not
refrigerated liquid
Gas sample, non-pressurized, 2.3 UN3168 ..... 2.3, 2.1 6 306 302 None Forbidden 1 L D
toxic, flammable, n.o.s., not
refrigerated liquid
Gas sample, non-pressurized, 2.3 UN3169 ..... 2.3 6 306 302, 304 None Forbidden 1 L D D
toxic, n.o.s., not
refrigerated liquid
Gasoline includes gasoline 3 UN1203 II 3 144, 177, B1, B33, IB2, 150 202 242 5 L 60 L E
mixed with ethyl alcohol, with T4
not more than 10% alcohol
Gasoline, casinghead, see
Gasoline
Gelatine, blasting, see
Explosive, blasting, type A
Gelatine dynamites, see
Explosive, blasting, type A
Germane 2.3 UN2192 ..... 2.3, 2.1 2 None 302 245 Forbidden Forbidden D 40
Germane, adsorbed 2.3 UN3523 ..... 2.3, 2.1 2 None 302c None Forbidden Forbidden D 40
Glycerol-1,3-dinitrate Forbidden
Glycerol gluconate trinitrate Forbidden
Glycerol lactate trinitrate Forbidden
Glycerol alpha-monochlorohydrin 6.1 UN2689 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Glyceryl trinitrate, see
Nitroglycerin, etc
Glycidaldehyde 3 UN2622 II 3, 6.1 IB2, IP8, T7, TP1 150 202 243 1 L 60 L A 40
Grenades, hand or rifle, with 1.1D UN0284 ..... 1.1D ....................... ............ 62 None Forbidden Forbidden 04 25
bursting charge
Grenades, hand or rifle, with 1.2D UN0285 ..... 1.2D ....................... ............ 62 None Forbidden Forbidden 04 25
bursting charge
[[Page 226]]
Grenades, hand or rifle, with 1.1F UN0292 ..... 1.1F ....................... ............ 62 None Forbidden Forbidden 05 25
bursting charge
Grenades, hand or rifle, with 1.2F UN0293 ..... 1.2F ....................... ............ 62 None Forbidden Forbidden 05 25
bursting charge
Grenades, illuminating, see
Ammunition, illuminating, etc
Grenades, practice, hand or 1.4S UN0110 ..... 1.4S ....................... ............ 62 None 25 kg 100 kg 01 25
rifle
Grenades, practice, hand or 1.3G UN0318 ..... 1.3G ....................... ............ 62 None Forbidden Forbidden 03 25
rifle
Grenades, practice, hand or 1.2G UN0372 ..... 1.2G ....................... ............ 62 None Forbidden Forbidden 03 25
rifle
Grenades practice, hand or 1.4G UN0452 ..... 1.4G ....................... ............ 62 None Forbidden 75 kg 02 25
rifle
Grenades, smoke, see
Ammunition, smoke, etc
Guanidine nitrate 5.1 UN1467 III 5.1 A1, IB8, IP3, T1, TP33 152 213 240 25 kg 100 kg A 73
Guanyl nitrosaminoguanylidene Forbidden
hydrazine (dry)
Guanyl nitrosaminoguanylidene 1.1A UN0113 ..... 1.1A 111, 117 None 62 None Forbidden Forbidden 05 25
hydrazine, wetted with not
less than 30 percent water, by
mass
Guanyl Forbidden
nitrosaminoguanyltetrazene
(dry)
Guanyl 1.1A UN0114 ..... 1.1A 111, 117 None 62 None Forbidden Forbidden 05 25
nitrosaminoguanyltetrazene,
wetted or Tetrazene, wetted
with not less than 30 percent
water or mixture of alcohol
and water, by mass
Gunpowder, compressed or
Gunpowder in pellets, see
Black powder (UN 0028)
Gunpowder, granular or as a
meal, see Black powder (UN
0027)
Hafnium powder, dry 4.2 UN2545 I 4.2 W31 None 211 242 Forbidden Forbidden D 13, 148
......... II 4.2 A19, A20, IB6, IP2, None 212 241 15 kg 50 kg D 13, 148
N34, T3, TP33, W31
......... III 4.2 B135, IB8, IP21, T1, None 213 241 25 kg 100 kg D 13, 148
TP33, W31
[[Page 227]]
Hafnium powder, wetted with not 4.1 UN1326 II 4.1 A6, A19, A20, IB6, IP2, None 212 241 15 kg 50 kg E 74
less than 25 percent water (a N34, T3, TP33, W31, W40
visible excess of water must
be present) (a) mechanically
produced, particle size less
than 53 microns; (b)
chemically produced, particle
size less than 840 microns
Hand signal device, see Signal
devices, hand
Hazardous substances, liquid or
solid, n.o.s., see
Environmentally hazardous
substances, etc
D G Hazardous waste, liquid, n.o.s. 9 NA3082 III 9 IB3, T2, TP1 155 203 241 No limit No limit A
D G Hazardous waste, solid, n.o.s. 9 NA3077 III 9 B54, IB8, IP2, T1, TP33 155 213 240 No limit No limit A
Heating oil, light 3 UN1202 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Helium, compressed 2.2 UN1046 ..... 2.2 ....................... 306 302 302, 314 75 kg 150 kg A 85
Helium, refrigerated liquid 2.2 UN1963 ..... 2.2 T75, TP5 320 316 318 50 kg 500 kg D
(cryogenic liquid)
Heptafluoropropane or 2.2 UN3296 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
Refrigerant gas R 227
n-Heptaldehyde 3 UN3056 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Heptanes 3 UN1206 II 3 IB2, T4, TP2 150 202 242 5 L 60 L B
n-Heptene 3 UN2278 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Hexachloroacetone 6.1 UN2661 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L B 12, 40
Hexachlorobenzene 6.1 UN2729 III 6.1 B3, IB8, IP3, T1, TP33 153 203 241 60 L 220 L A
Hexachlorobutadiene 6.1 UN2279 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Hexachlorocyclopentadiene 6.1 UN2646 I 6.1 2, B9, B14, B32, B77, None 227 244 Forbidden Forbidden D 25, 40
T20, TP2, TP13, TP38,
TP45
Hexachlorophene 6.1 UN2875 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Hexadecyltrichlorosilane 8 UN1781 II 8 A7, B2, B6, N34, T10, None 206 242 Forbidden 30 L C 40
TP2, TP7, TP13
Hexadienes 3 UN2458 II 3 IB2, T4, TP1 None 202 242 5 L 60 L B
Hexaethyl tetraphosphate and 2.3 UN1612 ..... 2.3 3 None 334 None Forbidden Forbidden D 40
compressed gas mixtures
Hexaethyl tetraphosphate, 6.1 UN1611 II 6.1 IB2, N76, T7, TP2 153 202 243 5 L 60 L E 40
liquid
Hexaethyl tetraphosphate, solid 6.1 UN1611 II 6.1 IB8, IP2, IP4, N76 153 212 242 25 kg 100 kg E 40
Hexafluoroacetone 2.3 UN2420 ..... 2.3, 8 2, B9, B14 None 304 314, 315 Forbidden Forbidden D 40
Hexafluoroacetone hydrate, 6.1 UN2552 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L B 40
liquid
Hexafluoroacetone hydrate, 6.1 UN3436 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B 40
solid
Hexafluoroethane, or 2.2 UN2193 ..... 2.2 ....................... 306 304 314, 315 75 kg 150 kg A
Refrigerant gas R 116
Hexafluorophosphoric acid 8 UN1782 II 8 A6, A7, B2, IB2, N3, None 202 242 1 L 30 L A
N34, T8, TP2
Hexafluoropropylene compressed 2.2 UN1858 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
or Refrigerant gas R 1216
Hexaldehyde 3 UN1207 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
[[Page 228]]
Hexamethylene diisocyanate 6.1 UN2281 II 6.1 IB2, T7, TP2, TP13 153 202 243 5 L 60 L C 13, 40
Hexamethylene triperoxide Forbidden
diamine (dry)
Hexamethylenediamine, solid 8 UN2280 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A 12, 25
Hexamethylenediamine solution 8 UN1783 II 8 IB2, T7, TP2 None 202 242 1 L 30 L A
............................... ......... ................ III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
Hexamethyleneimine 3 UN2493 II 3, 8 IB2, T7, TP1 150 202 243 1 L 5 L B 40
Hexamethylenetetramine 4.1 UN1328 III 4.1 A1, IB8, IP3, T1, TP33 151 213 240 25 kg 100 kg A
Hexamethylol benzene Forbidden
hexanitrate
Hexanes 3 UN1208 II 3 IB2, T4, TP2 150 202 242 5 L 60 L E
2,2',4,4',6,6'- Hexanitro-3,3'- Forbidden
dihydroxyazobenzene (dry)
Hexanitroazoxy benzene Forbidden
N,N'-(hexanitrodiphenyl) Forbidden
ethylene dinitramine (dry)
Hexanitrodiphenyl urea Forbidden
2,2',3',4,4',6- Forbidden
Hexanitrodiphenylamine
Hexanitrodiphenylamine or 1.1D UN0079 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
Dipicrylamine or Hexyl
2,3',4,4',6,6'- Forbidden
Hexanitrodiphenylether
Hexanitroethane Forbidden
Hexanitrooxanilide Forbidden
Hexanitrostilbene 1.1D UN0392 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
Hexanoic acid, see Corrosive
liquids, n.o.s.
Hexanols 3 UN2282 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A 74
1-Hexene 3 UN2370 II 3 IB2, T4, TP1 150 202 242 5 L 60 L E
Hexogen and
cyclotetramethylenetetranitram
ine mixtures, wetted or
desensitized see RDX and HMX
mixtures, wetted or
desensitized etc
Hexogen and HMX mixtures,
wetted or desensitized see RDX
and HMX mixtures, wetted or
desensitized etc
[[Page 229]]
Hexogen and octogen mixtures,
wetted or desensitized see RDX
and HMX mixtures, wetted or
desensitized etc
Hexogen, see
Cyclotrimethylenetrinitramine,
etc
Hexolite, or Hexotol dry or 1.1D UN0118 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
wetted with less than 15
percent water, by mass
Hexotonal 1.1D UN0393 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
Hexyl, see
Hexanitrodiphenylamine
Hexyltrichlorosilane 8 UN1784 II 8 A7, B2, B6, N34, T10, None 206 242 Forbidden 30 L C 40
TP2, TP7, TP13
High explosives, see individual
explosives' entries
HMX, see Cyclotetramethylenete
tranitramine, etc
Hydrazine, anhydrous 8 UN2029 I 8, 3, A3, A6, A7, A10, B7, None 201 243 Forbidden 2.5 L D 40, 52,
6.1 B16, B53 125.
Hydrazine, aqueous solution, 6.1 UN3293 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A 52.
with not more than 37 percent
hydrazine, by mass
Hydrazine aqueous solution, 8 UN3484 I 8, 3, B16, B53, T10, TP2, None 201 243 Forbidden 2.5 L D 40, 52,
flammable with more than 37% 6.1 TP13 125
hydrazine, by mass
Hydrazine aqueous solution, 8 UN2030 I 8, 6.1 B16, B53, T10, TP2, None 201 243 Forbidden 2.5 L D 40, 52
with more than 37% hydrazine, TP13
by mass
II 8, 6.1 B16, B53, IB2, T7, TP2, None 202 243 Forbidden 30 L D 40, 52
TP13
III 8, 6.1 B16, B53, IB3, T4, TP1 154 203 241 5 L 60 L D 40, 52
Hydrazine azide Forbidden
Hydrazine chlorate Forbidden
Hydrazine dicarbonic acid Forbidden
diazide
Hydrazine perchlorate Forbidden
Hydrazine selenate Forbidden
Hydriodic acid, anhydrous, see
Hydrogen iodide, anhydrous
Hydriodic acid 8 UN1787 II 8 A3, A6, B2, IB2, N41, 154 202 242 1 L 30 L C
T7, TP2
............................... ......... ................ III 8 IB3, T4, TP1 154 203 241 5 L 60 L C 8
Hydrobromic acid, anhydrous,
see Hydrogen bromide,
anhydrous
Hydrobromic acid, with more 8 UN1788 II 8 B2, B15, IB2, N41, T7, 154 202 242 Forbidden Forbidden C
than 49 percent hydrobromic TP2
acid
............................... ......... ................ III 8 IB3, T4, TP1 154 203 241 Forbidden Forbidden C 8
Hydrobromic acid, with not more 8 UN1788 II 8 A3, A6, B2, B15, IB2, 154 202 242 1 L 30 L C
than 49 percent hydrobromic N41, T7, TP2
acid
............................... ......... ................ III 8 A3, IB3, T4, TP1 154 203 241 5 L 60 L C 8
[[Page 230]]
Hydrocarbon gas mixture, 2.1 UN1964 ..... 2.1 ....................... 306 302 314, 315 Forbidden 150 kg E 40
compressed, n.o.s.
Hydrocarbon gas mixture, 2.1 UN1965 ..... 2.1 T50 306 304 314, 315 Forbidden 150 kg E 40
liquefied, n.o.s.
Hydrocarbons, liquid, n.o.s. 3 UN3295 I 3 144, T11, TP1, TP8, 150 201 243 1 L 30 L E
TP28
............................... ......... ................ II 3 144, IB2, T7, TP1, TP8, 150 202 242 5 L 60 L B
TP28
............................... ......... ................ III 3 144, B1, IB3, T4, TP1, 150 203 242 60 L 220 L A
TP29
Hydrochloric acid, anhydrous,
see Hydrogen chloride,
anhydrous
Hydrochloric acid 8 UN1789 II 8 386, A3, A6, B3, B15, 154 202 242 1 L 30 L C
B133, IB2, N41, T8, TP2
III 8 A3, IB3, T4, TP1 154 203 241 5 L 60 L C 8
Hydrocyanic acid, anhydrous,
see Hydrogen cyanide etc
Hydrocyanic acid, aqueous 6.1 UN1613 I 6.1 2, B61, B65, B77, B82, None 195 244 Forbidden Forbidden D 40
solutions or Hydrogen cyanide, T20, TP2, TP13
aqueous solutions with not
more than 20 percent hydrogen
cyanide
D Hydrocyanic acid, aqueous 6.1 NA1613 II 6.1 IB1, T14, TP2, TP13, None 195 243 Forbidden 5 L D 40
solutions with less than 5 TP27
percent hydrogen cyanide
Hydrocyanic acid, liquefied,
see Hydrogen cyanide, etc
Hydrocyanic acid (prussic), Forbidden
unstabilized
Hydrofluoric acid and Sulfuric 8 UN1786 I 8, 6.1 A6, A7, B15, B23, N5, None 201 243 Forbidden 2.5 L D 40
acid mixtures N34, T10, TP2, TP13
Hydrofluoric acid, anhydrous,
see Hydrogen fluoride,
anhydrous
Hydrofluoric acid, with more 8 UN1790 I 8, 6.1 A6, A7, B4, B15, B23, None 201 243 0.5 L 2.5 L D 12, 25,
than 60 percent strength N5, N34, T10, TP2, TP13 40
Hydrofluoric acid, with not 8 UN1790 II 8, 6.1 A6, A7, B15, IB2, N5, 154 202 243 1 L 30 L D 12, 25,
more than 60 percent strength N34, T8, TP2 40
[[Page 231]]
Hydrofluoroboric acid, see
Fluoroboric acid
Hydrofluorosilicic acid, see
Fluorosilicic acid
Hydrogen and Methane mixtures, 2.1 UN2034 ..... 2.1 N89 306 302 302, Forbidden 150 kg E 40, 57
compressed 314,
315
Hydrogen bromide, anhydrous 2.3 UN1048 ..... 2.3, 8 3, B14, N86, N89 None 304 314, 315 Forbidden Forbidden D 40
Hydrogen chloride, anhydrous 2.3 UN1050 ..... 2.3, 8 3, N86, N89 None 304 None Forbidden Forbidden D 40
Hydrogen chloride, refrigerated 2.3 UN2186 ..... 2.3, 8 3, B6 None None 314, 315 Forbidden Forbidden B 40
liquid
Hydrogen, compressed 2.1 UN1049 ..... 2.1 N89 306 302 302, 314 Forbidden 150 kg E 40, 57
Hydrogen cyanide, solution in 6.1 UN3294 I 6.1, 3 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40
alcohol with not more than 45 TP2, TP13, TP38, TP45
percent hydrogen cyanide
Hydrogen cyanide, stabilized 6.1 UN1051 I 6.1, 3 1, 387, B35, B61, B65, None 195 244 Forbidden Forbidden D 25, 40
with less than 3 percent water B77, B82
Hydrogen cyanide, stabilized, 6.1 UN1614 I 6.1 5, 387 None 195 None Forbidden Forbidden D 25, 40
with less than 3 percent water
and absorbed in a porous inert
material
Hydrogen fluoride, anhydrous 8 UN1052 I 8.6.1 3, B7, B46, B77, N86, None 163 244 Forbidden Forbidden D 40
T10, TP2
Hydrogen in a metal hydride 2.1 UN3468 ..... 2.1 167 None 311 None Forbidden 100 kg D
storage system or Hydrogen in
a metal hydride storage system
contained in equipment or
Hydrogen in a metal hydride
storage system packed with
equipment
Hydrogen iodide, anhydrous 2.3 UN2197 ..... 2.3, 8 3, B14, N86, N89 None 304 314, 315 Forbidden Forbidden D 40
Hydrogen iodide solution, see ........ ....................... ............ .......... ........ .......... .......... .......... .......
Hydriodic acid
Hydrogen peroxide and 5.1 UN3149 II 5.1, 8 145, A2, A3, A6, B53, None 202 243 1 L 5 L D 25, 66,
peroxyacetic acid mixtures, IB2, IP5, T7, TP2, TP6, 75.
stabilized with acids, water, TP24
and not more than 5 percent
peroxyacetic acid
Hydrogen, peroxide, aqueous 5.1 UN2014 II 5.1, 8 12, A60, B53, B80, B81, None 202 243 Forbidden Forbidden D 25, 66,
solutions with more than 40 B85, IB2, IP5, T7, TP2, 75
percent but not more than 60 TP6, TP24, TP37
percent hydrogen peroxide
(stabilized as necessary)
Hydrogen peroxide, aqueous 5.1 UN2014 II 5.1, 8 A2, A3, A6, B53, IB2, None 202 243 1 L 5 L D 25, 66,
solutions with not less than IP5, T7, TP2, TP6, 75.
20 percent but not more than TP24, TP37
40 percent hydrogen peroxide
(stabilized as necessary)
[[Page 232]]
Hydrogen, peroxide, aqueous 5.1 UN2984 III 5.1 A1, IB2, IP5, T4, TP1, 152 203 241 2.5 L 30 L B 25, 66,
solutions with not less than 8 TP6, TP24, TP37 75
percent but less than 20
percent hydrogen peroxide
(stabilized as necessary)
Hydrogen peroxide, stabilized 5.1 UN2015 I 5.1, 8 12, B53, B80, B81, B85, None 201 243 Forbidden Forbidden D 25, 66,
or Hydrogen peroxide aqueous T9, TP2, TP6, TP24, 75.
solutions, stabilized with TP37
more than 60 percent hydrogen
peroxide
Hydrogen, refrigerated liquid 2.1 UN1966 ..... 2.1 T75, TP5 None 316 318, 319 Forbidden Forbidden D 40, 57
(cryogenic liquid)
Hydrogen selenide, adsorbed 2.3 UN3526 ..... 2.3, 2.1 1 None 302c None Forbidden Forbidden D 40
Hydrogen selenide, anhydrous 2.3 UN2202 ..... 2.3, 2.1 1 None 192 245 Forbidden Forbidden D 40
Hydrogen sulfate, see Sulfuric
acid
Hydrogen sulfide 2.3 UN1053 ..... 2.3, 2.1 2, B9, B14, N89 None 304 314, 315 Forbidden Forbidden D 40
Hydrogendifluoride, solid, 8 UN1740 II 8 IB8, IP2, IP4, N3, N34, None 212 240 15 kg 50 kg A 25, 40,
n.o.s T3, TP33 52
III 8 IB8, IP3, N3, N34, T1, 154 213 240 25 kg 100 kg A 25, 40,
TP33 52
Hydrogendifluoride solution, 8 UN3471 II 8, 6.1 IB2, T7, TP2 154 202 242 1 L 30 L A 25, 40,
n.o.s 52.
III 8, 6.1 IB3, T4, TP1 154 203 241 5 L 60 L A 25, 40,
52.
Hydrosilicofluoric acid, see
Fluorosilicic acid
1-Hydroxybenzotriazole, 1.3C UN0508 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25
anhydrous, dry or wetted with
less than 20 percent water, by
mass
1-Hydroxybenzotriazole, 4.1 UN3474 I 4.1 N90 None 211 None 0.5 kg 0.5 kg D 28, 36
monohydrate
Hydroxyl amine iodide Forbidden
Hydroxylamine sulfate 8 UN2865 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
Hypochlorite solutions 8 UN1791 II 8 148, A7, B2, B15, IB2, 154 202 242 1 L 30 L B 26
IP5, N34, T7, TP2, TP24
[[Page 233]]
III 8 386, IB3, N34, T4, TP2, 154 203 241 5 L 60 L B 26
TP24
G Hypochlorites, inorganic, n.o.s 5.1 UN3212 II 5.1 349, A9, IB8, IP2, IP4, 152 212 240 5 kg 25 kg D 4, 25,
T3, TP33 52, 56,
58, 69,
116,
118
Hyponitrous acid Forbidden
Igniter fuse, metal clad, see
Fuse, igniter, tubular, metal
clad
Igniters 1.1G UN0121 ..... 1.1G ....................... None 62 None Forbidden Forbidden 03 25
Igniters 1.2G UN0314 ..... 1.2G ....................... None 62 None Forbidden Forbidden 03 25
Igniters 1.3G UN0315 ..... 1.3G ....................... None 62 None Forbidden Forbidden 03 25
Igniters 1.4G UN0325 ..... 1.4G ....................... None 62 None Forbidden 75 kg 02 25
Igniters 1.4S UN0454 ..... 1.4S ....................... None 62 None 25 kg 100 kg 01 25
3,3'-Iminodipropylamine 8 UN2269 III 8 IB3, T4, TP2 154 203 241 5 L 60 L A
G Infectious substances, 6.2 UN2900 ..... 6.2 A82 134 196 None 50 mL or 4 L or 4 B 40
affecting animals only 50 g kg
G Infectious substances, 6.2 UN 2814 ..... 6.2 A82 134 196 None 50 mL or 4 L or 4 B 40
affecting humans 50 g kg
Inflammable, see Flammable
Initiating explosives (dry) Forbidden
Inositol hexanitrate (dry) Forbidden
G Insecticide gases, n.o.s. 2.2 UN1968 ..... 2.2 ....................... 306 304 314, 315 75 kg 150 kg A
G Insecticide gases, flammable, 2.1 UN3354 ..... 2.1 T50 306 304 314, 315 Forbidden 150 kg D 40
n.o.s.
G Insecticide gases, toxic, 2.3 UN3355 ..... 2.3, 2.1 1 None 192 245 Forbidden Forbidden D 40
flammable, n.o.s. Inhalation
hazard Zone A
G Insecticide gases, toxic, 2.3 UN3355 ..... 2.3, 2.1 2, B9, B14 None 302, 305 314, 315 Forbidden Forbidden D 40
flammable, n.o.s. Inhalation
hazard Zone B
G Insecticide gases, toxic, 2.3 UN3355 ..... 2.3, 2.1 3, B14 None 302, 305 314, 315 Forbidden Forbidden D
flammable, n.o.s. Inhalation
hazard Zone C
G Insecticide gases, toxic, 2.3 UN3355 ..... 2.3, 2.1 4 None 302, 305 314, 315 Forbidden Forbidden D
flammable, n.o.s. Inhalation
hazard Zone D
G Insecticide gases, toxic, 2.3 UN1967 ..... 2.3 3 None 193, 334 245 Forbidden Forbidden D 40
n.o.s.
Inulin trinitrate (dry) Forbidden
+ Iodine 8 UN3495 III 8, 6.1 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg B 40, 55
Iodine azide (dry) Forbidden
Iodine monochloride, liquid 8 UN3498 II 8 IB2, T7, TP2 154 202 242 1 L 30 L D 40, 66,
74, 89,
90
Iodine monochloride, solid 8 UN1792 II 8 B6, IB8, IP2, IP4, N41, None 212 240 Forbidden 50 kg D 40, 66,
T7, TP2 74,
Iodine pentafluoride 5.1 UN2495 I 5.1, ....................... None 205 243 Forbidden Forbidden D 25, 40,
6.1, 8 52, 66,
90
2-Iodobutane 3 UN2390 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Iodomethylpropanes 3 UN2391 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Iodopropanes 3 UN2392 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
[[Page 234]]
Iodoxy compounds (dry) Forbidden
Iridium nitratopentamine Forbidden
iridium nitrate
Iron chloride, see Ferric
chloride
Iron oxide, spent, or Iron 4.2 UN1376 III 4.2 B18, B134, IB8, IP21, None 213 240 Forbidden Forbidden E 13, 148
sponge, spent obtained from T1, TP33, W100
coal gas purification
Iron pentacarbonyl 6.1 UN1994 I 6.1, 3 1, B9, B14, B30, B77, None 226 244 Forbidden Forbidden D 40
T22, TP2, TP13, TP38,
TP44
Iron sesquichloride, see Ferric
chloride
Irritating material, see Tear
gas substances, etc
Isobutane see also Petroleum 2.1 UN1969 ..... 2.1 19, T50 306 304 314, 315 Forbidden 150 kg E 40
gases, liquefied
Isobutanol or Isobutyl alcohol 3 UN1212 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Isobutyl acetate 3 UN1213 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Isobutyl acrylate, stabilized 3 UN2527 III 3 387, B1, IB3, T2, TP1 150 203 242 60 L 220 L C 25
Isobutyl alcohol, see
Isobutanol
Isobutyl aldehyde, see
Isobutyraldehyde
Isobutyl formate 3 UN2393 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Isobutyl isobutyrate 3 UN2528 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
+ Isobutyl isocyanate 6.1 UN2486 I 6.1, 3 1, B9, B14, B30, T20, None 226 244 Forbidden Forbidden D 40
TP2, TP13, TP27
Isobutyl methacrylate, 3 UN2283 III 3 387, B1, IB3, T2, TP1 150 203 242 60 L 220 L C 25
stabilized
Isobutyl propionate 3 UN2394 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L B
Isobutylamine 3 UN1214 II 3, 8 IB2, T7, TP1 150 202 243 1 L 5 L B 40
Isobutylene see also Petroleum 2.1 UN1055 ..... 2.1 19, T50 306 304 314, 315 Forbidden 150 kg E 40
gases, liquefied
Isobutyraldehyde or Isobutyl 3 UN2045 II 3 IB2, T4, TP1 150 202 242 5 L 60 L E 40
aldehyde
Isobutyric acid 3 UN2529 III 3, 8 B1, IB3, T4, TP1 150 203 242 5 L 60 L A
Isobutyronitrile 3 UN2284 II 3, 6.1 IB2, T7, TP2, TP13 150 202 243 1 L 60 L E 40
Isobutyryl chloride 3 UN2395 II 3, 8 IB1, T7, TP2 150 202 243 1 L 5 L C 40
[[Page 235]]
G Isocyanates, flammable, toxic, 3 UN2478 II 3, 6.1 5, A3, A7, IB2, T11, 150 202 243 1 L 60 L D 40
n.o.s. or Isocyanate TP2, TP13, TP27, W31
solutions, flammable, toxic,
n.o.s. flash point less than
23 degrees C
......... III 3, 6.1 5, A3, A7, IB3, T7, 150 203 242 60 L 220 L A
TP1, TP13, TP28, W31
G Isocyanates, toxic, flammable, 6.1 UN3080 II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 25, 40
n.o.s. or Isocyanate TP27
solutions, toxic, flammable,
n.o.s., flash point not less
than 23 degrees C but not more
than 61 degrees C and boiling
point less than 300 degrees C
G Isocyanates, toxic, n.o.s. or 6.1 UN2206 II 6.1 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L E 25, 40
Isocyanate solutions, toxic, TP27
n.o.s., flash point more than
61 degrees C and boiling point
less than 300 degrees C
............................... ................ III 6.1 IB3, T7, TP1, TP13, 153 203 241 60 L 220 L E 25, 40
TP28
Isocyanatobenzotrifluorides 6.1 UN2285 II 6.1, 3 5, IB2, T7, TP2 153 202 243 5 L 60 L D 25, 40
Isoheptenes 3 UN2287 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Isohexenes 3 UN2288 II 3 IB2, IP8, T11, TP1 150 202 242 5 L 60 L E
Isooctane, see Octanes
Isooctenes 3 UN1216 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Isopentane, see Pentane
Isopentanoic acid, see
Corrosive liquids, n.o.s.
Isopentenes 3 UN2371 I 3 T11, TP2 150 201 243 1 L 30 L E
Isophorone diisocyanate 6.1 UN2290 III 6.1 IB3, T4, TP2 153 203 241 60 L 220 L B 40
Isophoronediamine 8 UN2289 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
Isoprene, stabilized 3 UN1218 I 3 387, T11, TP2 150 201 243 1 L 30 L D 25
Isopropanol or Isopropyl 3 UN1219 II 3 IB2, T4, TP1 4b, 150 202 242 5 L 60 L B
alcohol
Isopropenyl acetate 3 UN2403 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Isopropenylbenzene 3 UN2303 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Isopropyl acetate 3 UN1220 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Isopropyl acid phosphate 8 UN1793 III 8 IB2, T4, TP1 154 213 240 25 kg 100 kg A
Isopropyl alcohol, see
Isopropanol
Isopropyl butyrate 3 UN2405 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Isopropyl chloroacetate 3 UN2947 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Isopropyl chloroformate 6.1 UN2407 I 6.1, 3, 2, B9, B14, B32, B77, None 227 244 Forbidden Forbidden B 21, 40,
8 T20, TP2, TP13, TP38, 100
TP44
Isopropyl 2-chloropropionate 3 UN2934 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Isopropyl isobutyrate 3 UN2406 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
+ Isopropyl isocyanate 6.1 UN2483 I 6.1, 3 1, B9, B14, B30, T20, None 226 244 Forbidden Forbidden D 40
TP2, TP13, TP38, TP44
Isopropyl mercaptan, see
Propanethiols
Isopropyl nitrate 3 UN1222 II 3 IB9 150 202 None 5 L 60 L D
[[Page 236]]
Isopropyl phosphoric acid, see
Isopropyl acid phosphate
Isopropyl propionate 3 UN2409 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Isopropylamine 3 UN1221 I 3, 8 T11, TP2 None 201 243 0.5 L 2.5 L E
Isopropylbenzene 3 UN1918 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Isopropylcumyl hydroperoxide, Forbidden
with more than 72 percent in
solution
Isosorbide dinitrate mixture 4.1 UN2907 II 4.1 IB6, IP2, N85 None 212 None 15 kg 50 kg E 28, 36
with not less than 60 percent
lactose, mannose, starch or
calcium hydrogen phosphate
Isosorbide-5-mononitrate 4.1 UN3251 III 4.1 66, 159, IB8 151 223 240 Forbidden Forbidden D 12, 25,
40, 84
Isothiocyanic acid Forbidden
Jet fuel, see Fuel aviation,
turbine engine
D Jet perforating guns, charged 1.1D NA0124 ..... 1.1D 55, 56 None 62 None Forbidden Forbidden 04 25
oil well, with detonator
D Jet perforating guns, charged 1.4D NA0494 ..... 1.4D 55, 56 None 62 None Forbidden Forbidden 02 25
oil well, with detonator
Jet perforating guns, charged, 1.4D UN0494 ..... 1.4D 55, 114 None 62 None Forbidden 300 kg 02 25
oil well, without detonator
Jet perforating guns, charged 1.1D UN0124 ..... 1.1D 55 None 62 None Forbidden Forbidden 04 25
oil well, without detonator
Jet perforators, see Charges,
shaped, etc
Jet tappers, without detonator,
see Charges, shaped, etc
Jet thrust igniters, for rocket
motors or Jato, see Igniters
Jet thrust unit (Jato), see
Rocket motors
Kerosene 3 UN1223 III 3 144, B1, IB3, T2, TP2 150 203 242 60 L 220 L A
G Ketones, liquid, n.o.s. 3 UN1224 I 3 T11, TP1, TP8, TP27 None 201 243 1 L 30 L E
............................... ......... ................ II 3 IB2, T7, TP1, TP8, TP28 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T4, TP1, TP29 150 203 242 60 L 220 L A
Krill meal 4.2 UN3497 II 4.2 155, IB6, IP2, T3, TP33 None 212 242 15 kg 50 kg B 25, 88,
128
[[Page 237]]
III 4.2 155, IB8, IP3, T1, TP33 None 213 242 25 kg 100 kg A 128
Krypton, compressed 2.2 UN1056 2.2 306, 307 302 None 75 kg 150 kg A
Krypton, refrigerated liquid 2.2 UN1970 ..... 2.2 T75, TP5 320 None None 50 kg 500 kg D
(cryogenic liquid)
Lacquer base or lacquer chips,
nitrocellulose, dry, see
Nitrocellulose, etc. (UN 2557)
Lacquer base or lacquer chips,
plastic, wet with alcohol or
solvent, see Nitrocellulose
(UN2059, UN2555, UN2556,
UN2557) or Paint etc.(UN1263)
Lead acetate 6.1 UN1616 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Lead arsenates 6.1 UN1617 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Lead arsenites 6.1 UN1618 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Lead azide (dry) Forbidden
Lead azide, wetted with not 1.1A UN0129 ..... 1.1A 111, 117 None 62 None Forbidden Forbidden 05 25
less than 20 percent water or
mixture of alcohol and water,
by mass
G Lead compounds, soluble, n.o.s 6.1 UN2291 III 6.1 138, IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Lead cyanide 6.1 UN1620 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 52
Lead dioxide 5.1 UN1872 III 5.1 A1, IB8, IP3, T1, TP33 152 213 240 25 kg 100 kg A
Lead dross, see Lead sulfate,
with more than 3 percent free
acid
Lead nitrate 5.1 UN1469 II 5.1, 6.1 IB8, IP2, IP4, T3, TP33 152 212 242 5 kg 25 kg A
Lead nitroresorcinate (dry) Forbidden
Lead perchlorate, solid 5.1 UN1470 II 5.1, 6.1 IB6, IP2, T3, TP33 152 212 242 5 kg 25 kg A 56, 58
Lead perchlorate, solution 5.1 UN3408 II 5.1, 6.1 IB2, T4, TP1 152 202 243 1 L 5 L A 56, 58
III 5.1, 6.1 IB2, T4, TP1 152 203 242 2.5 L 30 L A 56, 58
Lead peroxide, see Lead dioxide
Lead phosphite, dibasic 4.1 UN2989 II 4.1 IB8, IP2, IP4, T3, TP33 None 212 240 15 kg 50 kg B 34.
III 4.1 IB8, IP3, T1, TP33 151 213 240 25 kg 100 kg B 34.
Lead picrate (dry) Forbidden
Lead styphnate (dry) Forbidden
Lead styphnate, wetted or Lead 1.1A UN0130 ..... 1.1A 111, 117 None 62 None Forbidden Forbidden 05 25
trinitroresorcinate, wetted
with not less than 20 percent
water or mixture of alcohol
and water, by mass
Lead sulfate with more than 3 8 UN1794 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A
percent free acid
Lead trinitroresorcinate, see
Lead styphnate, etc
Life-saving appliances, not 9 UN3072 ..... None 182 None 219 None No limit No limit A 122
self inflating containing
dangerous goods as equipment
[[Page 238]]
Life-saving appliances, self 9 UN2990 ..... None 338 None 219 None No limit No limit A 122
inflating
Lighters containing flammable 2.1 UN1057 ..... 2.1 168 21,308 21,308 None 1 kg 15 kg B 40
gas
Lighters, new or empty, purged ......... ................ ..... ........ 168
of all residual fuel and
vapors
Lighters, non-pressurized, 3 NA1057 II 3 168 21 None None Forbidden Forbidden B 40
containing flammable liquid,
Lighter refills containing 2.1 UN1057 ..... 2.1 169 306 306 None 1 kg 15 kg B 40
flammable gas not exceeding 4
fluid ounces (7.22 cubic
inches) and 65 grams of
flammable gas
Lighter replacement cartridges
containing liquefied petroleum
gases see Lighter refills
containing flammable gas. Etc.
Lighters, fuse 1.4S UN0131 ..... 1.4S ....................... None 62 None 25 kg 100 kg 01 25
Lime, unslaked, see Calcium
oxide
G Liquefied gas, flammable, 2.1 UN3161 ..... 2.1 T50 306 304 314, 315 Forbidden 150 kg D 40
n.o.s.
G Liquefied gas, n.o.s. 2.2 UN3163 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
G Liquefied gas, oxidizing, 2.2 UN3157 ..... 2.2, 5.1 A14 306 304 314, 315 75 kg 150 kg D
n.o.s.
G I Liquefied gas, toxic, 2.3 UN3308 ..... 2.3, 8 1 None 192 245 Forbidden Forbidden D 40
corrosive, n.o.s. Inhalation
Hazard Zone A
G I Liquefied gas, toxic, 2.3 UN3308 ..... 2.3, 8 2, B9, B14 None 304 314, 315 Forbidden Forbidden D 40
corrosive, n.o.s. Inhalation
Hazard Zone B
G I Liquefied gas, toxic, 2.3 UN3308 ..... 2.3, 8 3, B14 None 304 314, 315 Forbidden Forbidden D 40
corrosive, n.o.s. Inhalation
Hazard Zone C
G I Liquefied gas, toxic, 2.3 UN3308 ..... 2.3, 8 4 None 304 314, 315 Forbidden Forbidden D 40
corrosive, n.o.s. Inhalation
Hazard Zone D
G I Liquefied gas, toxic, 2.3 UN3309 ..... 2.3, 1 None 192 245 Forbidden Forbidden D 17, 40
flammable, corrosive, n.o.s. 2.1, 8
Inhalation Hazard Zone A
G I Liquefied gas toxic, flammable, 2.3 UN3309 ..... 2.3, 2, B9, B14 None 304 314, 315 Forbidden Forbidden D 17, 40
corrosive, n.o.s. Inhalation 2.1, 8
Hazard Zone B
[[Page 239]]
G I Liquefied gas, toxic, 2.3 UN3309 ..... 2.3, 3, B14 None 304 314, 315 Forbidden Forbidden D 17, 40
flammable, corrosive, n.o.s. 2.1, 8
Inhalation Hazard Zone C
G I Liquefied gas, toxic, 2.3 UN3309 ..... 2.3, 4 None 304 314, 315 Forbidden Forbidden D 17, 40
flammable, corrosive, n.o.s. 2.1, 8
Inhalation Hazard Zone D
G Liquefied gas, toxic, 2.3 UN3160 ..... 2.3, 2.1 1 None 192 245 Forbidden Forbidden D 40
flammable, n.o.s. Inhalation
Hazard Zone A
G Liquefied gas, toxic, 2.3 UN3160 ..... 2.3, 2.1 2, B9, B14 None 304 314, 315 Forbidden Forbidden D 40
flammable, n.o.s. Inhalation
Hazard Zone B
G Liquefied gas, toxic, 2.3 UN3160 ..... 2.3, 2.1 3, B14 None 304 314, 315 Forbidden Forbidden D 40
flammable, n.o.s. Inhalation
Hazard Zone C
G Liquefied gas, toxic, 2.3 UN3160 ..... 2.3, 2.1 4 None 304 314, 315 Forbidden Forbidden D 40
flammable, n.o.s. Inhalation
Hazard Zone D
G Liquefied gas, toxic, n.o.s. 2.3 UN3162 ..... 2.3 1 None 192 245 Forbidden Forbidden D 40
Inhalation Hazard Zone A
G Liquefied gas, toxic, n.o.s. 2.3 UN3162 ..... 2.3 2, B9, B14 None 304 314, 315 Forbidden Forbidden D 40
Inhalation Hazard Zone B
G Liquefied gas, toxic, n.o.s. 2.3 UN3162 ..... 2.3 3, B14 None 304 314, 315 Forbidden Forbidden D 40
Inhalation Hazard Zone C
G Liquefied gas, toxic, n.o.s. 2.3 UN3162 ..... 2.3 4 None 304 314, 315 Forbidden Forbidden D 40
Inhalation Hazard Zone D
G I Liquefied gas, toxic, 2.3 UN3310 ..... 2.3, 1 None 192 245 Forbidden Forbidden D 40, 89,
oxidizing, corrosive, n.o.s. 5.1, 8 90
Inhalation Hazard Zone A
G I Liquefied gas, toxic, 2.3 UN3310 ..... 2.3, 2, B9, B14 None 304 314, 315 Forbidden Forbidden D 40, 89,
oxidizing, corrosive, n.o.s. 5.1, 8 90
Inhalation Hazard Zone B
G I Liquefied gas, toxic, 2.3 UN3310 ..... 2.3, 3, B14 None 304 314, 315 Forbidden Forbidden D 40, 89,
oxidizing, corrosive, n.o.s. 5.1, 8 90
Inhalation Hazard Zone C
G I Liquefied gas, toxic, 2.3 UN3310 ..... 2.3, 4 None 304 314, 315 Forbidden Forbidden D 40, 89,
oxidizing, corrosive, n.o.s. 5.1, 8 90
Inhalation Hazard Zone D
G Liquefied gas, toxic, 2.3 UN3307 ..... 2.3, 5.1 1 None 192 245 Forbidden Forbidden D 40
oxidizing, n.o.s. Inhalation
Hazard Zone A
G Liquefied gas, toxic, 2.3 UN3307 ..... 2.3, 5.1 2, B9, B14 None 304 314, 315 Forbidden Forbidden D 40
oxidizing, n.o.s. Inhalation
Hazard Zone B
G Liquefied gas, toxic, 2.3 UN3307 ..... 2.3, 5.1 3, B14 None 304 314, 315 Forbidden Forbidden D 40
oxidizing, n.o.s. Inhalation
Hazard Zone C
G Liquefied gas, toxic, 2.3 UN3307 ..... 2.3, 5.1 4 None 304 314, 315 Forbidden Forbidden D 40
oxidizing, n.o.s. Inhalation
Hazard Zone D
Liquefied gases, non-flammable 2.2 UN1058 ..... 2.2 ....................... 306 304 None 75 kg 150 kg A
charged with nitrogen, carbon
dioxide or air
Liquefied hydrocarbon gas, see
Hydrocarbon gas mixture,
liquefied, n.o.s.
Liquefied natural gas, see
Methane, etc. (UN 1972)
[[Page 240]]
Liquefied petroleum gas see
Petroleum gases, liquefied
Lithium 4.3 UN1415 I 4.3 A7, A19, IB4, IP1, N45, 151 211 244 Forbidden 15 kg D 13, 52,
T9, TP7, TP33, W32 148
Lithium acetylide
ethylenediamine complex, see
Water reactive solid etc
Lithium aluminum hydride 4.3 UN1410 I 4.3 A19, W32 None 211 242 Forbidden 15 kg E 13, 52,
148
Lithium aluminum hydride, 4.3 UN1411 I 4.3, 3 A2, A3, A11, N34 None 201 244 Forbidden 1 L D 13, 40,
ethereal 148
Lithium borohydride 4.3 UN1413 I 4.3 A19, N40, W32 None 211 242 Forbidden 15 kg E 13, 52,
148
Lithium ferrosilicon 4.3 UN2830 II 4.3 A19, IB7, IP2, IP21, 151 212 241 15 kg 50 kg E 13, 40,
T3, TP33, W31, W40 85,
103,
148
Lithium hydride 4.3 UN1414 I 4.3 A19, N40, W32 None 211 242 Forbidden 15 kg E 13, 52,
148
Lithium hydride, fused solid 4.3 UN2805 II 4.3 A8, A19, A20, IB4, T3, 151 212 241 15 kg 50 kg E 13, 52,
TP33, W31, W40 148
Lithium hydroxide 8 UN2680 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A 52.
Lithium hydroxide, solution 8 UN2679 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L A 29, 52.
III 8 IB3, T4, TP2 154 203 241 5 L 60 L A 29, 52,
96.
Lithium hypochlorite, dry or 5.1 UN1471 II 5.1 A9, IB8, IP2, IP4, N34, 152 212 240 5 kg 25 kg A 4, 25,
Lithium hypochlorite mixture T3, TP33 52, 56,
58, 69,
106,
116
............................... ................ III 5.1 IB8, IP3, N34, T1, TP33 152 213 240 25 kg 100 kg A 4, 25,
52, 56,
58, 69,
106,
116
Lithium in cartridges, see
Lithium
Lithium ion batteries including 9 UN3480 ..... 9 422, A51, A54 185 185 185 5 kg 35 kg A
lithium ion polymer batteries
[[Page 241]]
Lithium ion batteries contained 9 UN3481 ..... 9 181, 422, A54 185 185 185 5 kg 35 kg A
in equipment including lithium
ion polymer batteries
Lithium ion batteries packed 9 UN3481 ..... 9 181, 422, A54 185 185 185 5 kg 35 kg A
with equipment including
lithium ion polymer batteries
Lithium metal batteries 9 UN3090 ..... 9 422, A54 185 185 185 Forbidden 35 kg A
including lithium alloy
batteries
Lithium metal batteries 9 UN3091 ..... 9 181, 422, A54, A101 185 185 185 5 kg 35 kg A
contained in equipment
including lithium alloy
batteries
Lithium metal batteries packed 9 UN3091 ..... 9 181, 422, A54 185 185 185 5 kg 35 kg A
with equipment including
lithium alloy batteries
Lithium nitrate 5.1 UN2722 III 5.1 A1, IB8, IP3, T1, TP33 152 213 240 25 kg 100 kg A
Lithium nitride 4.3 UN2806 I 4.3 A19, IB4, IP1, N40, W32 None 211 242 Forbidden 15 kg E
Lithium peroxide 5.1 UN1472 II 5.1 A9, IB6, IP2, N34, T3, 152 212 None 5 kg 25 kg C 13, 52,
TP33, W100 66, 75,
148
Lithium silicon 4.3 UN1417 II 4.3 A19, A20, IB7, IP2, 151 212 241 15 kg 50 kg A 13, 85,
IP21, T3, TP33, W31, 103,
W40 148
LNG, see Methane etc. (UN 1972)
London purple 6.1 UN1621 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
LPG, see Petroleum gases,
liquefied
Lye, see Sodium hydroxide,
solutions
Magnesium aluminum phosphide 4.3 UN1419 I 4.3, 6.1 A19, N34, N40, W32 None 211 242 Forbidden 15 kg E 13, 40,
52, 85,
148
+ Magnesium arsenate 6.1 UN1622 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Magnesium bisulfite solution,
see Bisulfites, aqueous
solutions, n.o.s.
Magnesium bromate 5.1 UN1473 II 5.1 A1, IB8, IP2, IP4, T3, 152 212 242 5 kg 25 kg A 56, 58
TP33
Magnesium chlorate 5.1 UN2723 II 5.1 IB8, IP2, IP4, T3, TP33 152 212 242 5 kg 25 kg A 56, 58
Magnesium diamide 4.2 UN2004 II 4.2 A8, A19, A20, IB6, T3, None 212 241 15 kg 50 kg C 13, 148
TP33, W31
Magnesium dross, wet or hot Forbidden
Magnesium fluorosilicate 6.1 UN2853 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 52
Magnesium granules, coated, 4.3 UN2950 III 4.3 A1, A19, IB8, IP4, T1, 151 213 240 25 kg 100 kg A 13, 52,
particle size not less than TP33, W100 148
149 microns
Magnesium hydride 4.3 UN2010 I 4.3 A19, N40, W32 None 211 242 Forbidden 15 kg E 13, 52,
148
[[Page 242]]
Magnesium or Magnesium alloys 4.1 UN1869 III 4.1 A1, B134, IB8, IP21, 151 213 240 25 kg 100 kg A 13, 39,
with more than 50 percent T1, TP33, W100 52, 53,
magnesium in pellets, turnings 74,
or ribbons 101,
147,
148
Magnesium nitrate 5.1 UN1474 III 5.1 332, A1, B120, IB8, 152 213 240 25 kg 100 kg A
IP3, T1, TP33
Magnesium perchlorate 5.1 UN1475 II 5.1 IB6, IP2, T3, TP33 152 212 242 5 kg 25 kg A 56, 58
Magnesium peroxide 5.1 UN1476 II 5.1 IB6, IP2, T3, TP33, 152 212 242 5 kg 25 kg C 13, 52,
W100 66, 75,
148
Magnesium phosphide 4.3 UN2011 I 4.3, 6.1 A19, N40, W32 None 211 None Forbidden 15 kg E 13, 40,
52, 85,
148
Magnesium, powder or Magnesium 4.3 UN1418 I 4.3, 4.2 A19, B56, W32 None 211 244 Forbidden 15 kg A 13, 39,
alloys, powder 52, 148
......... II 4.3, 4.2 A19, B56, IB5, IP2, T3, None 212 241 15 kg 50 kg A 13, 39,
TP33, W31, W40 52, 148
......... III 4.3, 4.2 A19, B56, IB8, IP4, T1, None 213 241 25 kg 100 kg A 13, 39,
TP33, W31 52, 148
Magnesium scrap, see Magnesium,
etc. (UN 1869)
Magnesium silicide 4.3 UN2624 II 4.3 A19, A20, IB7, IP2, 151 212 241 15 kg 50 kg B 13, 85,
IP21, T3, TP33, W31, 103,
W40 148
Magnetized material, see Sec.
173.21
Maleic anhydride 8 UN2215 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A 95, 102
Maleic anhydride, molten 8 UN2215 III 8 T4, TP3 None 213 240 Forbidden Forbidden A 95, 102
Malononitrile 6.1 UN2647 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 12, 25
Mancozeb (manganese
ethylenebisdithiocarbamate
complex with zinc) see Maneb
Maneb or Maneb preparations 4.2 UN2210 III 4.2, 4.3 57, A1, A19, IB6, T1, None 213 242 25 kg 100 kg A 13, 34,
with not less than 60 percent TP33, W100 148
maneb
Maneb stabilized or Maneb 4.3 UN2968 III 4.3 54, A1, A19, IB8, IP4, 151 213 242 25 kg 100 kg B 13, 34,
preparations, stabilized T1, TP33, W100 52, 148
against self-heating
[[Page 243]]
Manganese nitrate 5.1 UN2724 III 5.1 A1, IB8, IP3, T1, TP33 152 213 240 25 kg 100 kg A
Manganese resinate 4.1 UN1330 III 4.1 A1, IB6, T1, TP33 151 213 240 25 kg 100 kg A
Mannitan tetranitrate Forbidden
Mannitol hexanitrate (dry) Forbidden
Mannitol hexanitrate, wetted or 1.1D UN0133 ..... 1.1D 121 None 62 None Forbidden Forbidden 04 25
Nitromannite, wetted with not
less than 40 percent water, or
mixture of alcohol and water,
by mass
Marine pollutants, liquid or
solid, n.o.s., see
Environmentally hazardous
substances, liquid or solid,
n.o.s.
Matches, block, see Matches,
'strike anywhere'
Matches, fusee 4.1 UN2254 III 4.1 ....................... 186 186 None Forbidden Forbidden A
Matches, safety (book, card or 4.1 UN1944 III 4.1 ....................... 186 186 None 25 kg 100 kg A
strike on box)
Matches, strike anywhere 4.1 UN1331 III 4.1 ....................... 186 186 None Forbidden Forbidden B
Matches, wax, Vesta 4.1 UN1945 III 4.1 ....................... 186 186 None 25 kg 100 kg B
Matting acid, see Sulfuric acid
Medicine, liquid, flammable, 3 UN3248 II 3, 6.1 IB2 150 202 243 1 L 60 L B 40
toxic, n.o.s
......... ................ III 3, 6.1 IB3 150 203 242 60 L 220 L A
Medicine, liquid, toxic, n.o.s 6.1 UN1851 II 6.1 ....................... 153 202 243 5 L 60 L C 40
......... ................ III 6.1 ....................... 153 203 241 60 L 220 L C 40
Medicine, solid, toxic, n.o.s 6.1 UN3249 II 6.1 T3, TP33 153 212 242 25 kg 100 kg C 40
......... ................ III 6.1 T3, TP33 153 213 240 100 kg 200 kg C 40
Memtetrahydrophthalic
anhydride, see Corrosive
liquids, n.o.s.
Mercaptans, liquid, flammable, 3 UN3336 I 3 T11, TP2 150 201 243 1 L 30 L E 95, 102
n.o.s. or Mercaptan mixture,
liquid, flammable, n.o.s
II 3 IB2, T7, TP1, TP8, TP28 150 202 242 5 L 60 L B 95, 102
III 3 B1, B52, IB3, T4, TP1, 150 203 241 60 L 220 L B 95, 102
TP29
Mercaptans, liquid, flammable, 3 UN1228 II 3, 6.1 IB2, T11, TP2, TP27 None 202 243 Forbidden 60 L B 40, 95,
toxic, n.o.s. or Mercaptan 102
mixtures, liquid, flammable,
toxic, n.o.s
III 3, 6.1 A6, B1, IB3, T7, TP1, 150 203 242 5 L 220 L A 40, 95,
TP28 102
Mercaptans, liquid, toxic, 6.1 UN3071 II 6.1, 3 A6, IB2, T11, TP2, 153 202 243 5 L 60 L C 40,
flammable, n.o.s. or Mercaptan TP13, TP27 102,
mixtures, liquid, toxic, 121
flammable, n.o.s., flash point
not less than 23 degrees C
5-Mercaptotetrazol-1-acetic 1.4C UN0448 ..... 1.4C ....................... None 62 None Forbidden 75 kg 02 25
acid
Mercuric arsenate 6.1 UN1623 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Mercuric chloride 6.1 UN1624 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
[[Page 244]]
Mercuric compounds, see Mercury
compounds, etc
Mercuric nitrate 6.1 UN1625 II 6.1 IB8, IP2, IP4, N73, T3, 153 212 242 25 kg 100 kg A
TP33
+ Mercuric potassium cyanide 6.1 UN1626 I 6.1 IB7, IP1, N74, N75, T6, None 211 242 5 kg 50 kg A 52
TP33, W31
Mercuric sulfocyanate, see
Mercury thiocyanate
Mercurol, see Mercury nucleate
Mercurous azide Forbidden
Mercurous compounds, see
Mercury compounds, etc
Mercurous nitrate 6.1 UN1627 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
A W Mercury 8 UN2809 III 8, 6.1 365 164 164 240 35 kg 35 kg B 40, 97
Mercury acetate 6.1 UN1629 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Mercury acetylide Forbidden
Mercury ammonium chloride 6.1 UN1630 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Mercury based pesticides, 3 UN2778 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L B 40
liquid, flammable, toxic,
flash point less than 23
degrees C
............................... ......... ................ II 3, 6.1 IB2, T11, TP2, TP13, 150 202 243 1 L 60 L B 40
TP27
Mercury based pesticides, 6.1 UN3012 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
liquid, toxic
............................... ......... ................ II 6.1 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1 IB3, T7, TP2, TP28 153 203 241 60 L 220 L A 40
Mercury based pesticides, 6.1 UN3011 I 6.1, 3 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
liquid, toxic, flammable,
flash point not less than 23
degrees C
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1, 3 IB3, T7, TP2, TP28 153 203 242 60 L 220 L A 40
Mercury based pesticides, 6.1 UN2777 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 40
solid, toxic
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
Mercury benzoate 6.1 UN1631 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
[[Page 245]]
Mercury bromides 6.1 UN1634 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
G Mercury compound, liquid, n.o.s 6.1 UN2024 I 6.1 ....................... None 201 243 1 L 30 L B 40
......... ................ II 6.1 IB2 153 202 243 5 L 60 L B 40
......... ................ III 6.1 IB3 153 203 241 60 L 220 L B 40
G Mercury compound, solid, n.o.s 6.1 UN2025 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A
......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
A W Mercury contained in 8 UN3506 ..... 8, 6.1 A191 164 None None No limit No limit B 40, 97
manufactured articles
Mercury cyanide 6.1 UN1636 II 6.1 IB8, IP2, IP4, N74, 153 212 242 25 kg 100 kg A 52
N75, T3, TP33
Mercury fulminate, wetted with 1.1A UN0135 ..... 1.1A 111, 117 None 62 None Forbidden Forbidden 05 25
not less than 20 percent
water, or mixture of alcohol
and water, by mass
Mercury gluconate 6.1 UN1637 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Mercury iodide 6.1 UN1638 II 6.1 IB2, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Mercury iodide aquabasic Forbidden
ammonobasic (Iodide of
Millon's base)
Mercury nitride Forbidden
Mercury nucleate 6.1 UN1639 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Mercury oleate 6.1 UN1640 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Mercury oxide 6.1 UN1641 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Mercury oxycyanide Forbidden
Mercury oxycyanide, 6.1 UN1642 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 52, 91
desensitized
Mercury potassium iodide 6.1 UN1643 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Mercury salicylate 6.1 UN1644 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
+ Mercury sulfates 6.1 UN1645 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Mercury thiocyanate 6.1 UN1646 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Mesityl oxide 3 UN1229 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
G Metal carbonyls, liquid, n.o.s. 6.1 UN3281 I 6.1 5, T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
............................... ......... ................ II 6.1 IB2, T11, TP2, TP27 153 202 243 5 L 60 L B 40
............................... ......... ................ III 6.1 IB3, T7, TP1, TP28 153 203 241 60 L 220 L A 40
G Metal carbonyls, solid, n.o.s. 6.1 UN3466 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg D 40
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg B 40
G Metal catalyst, dry 4.2 UN2881 I 4.2 N34, T21, TP7, TP33, None 187 None Forbidden Forbidden C 13,
W31 147,
148
......... II 4.2 IB6, IP2, N34, T3, None 187 242 Forbidden 50 kg C 13,
TP33, W31 147,
148
......... III 4.2 B135, IB8, IP21, N34, None 187 241 25 kg 100 kg C 13,
T1, TP33, W31 147,
148
G Metal catalyst, wetted with a 4.2 UN1378 II 4.2 A2, A8, IB1, N34, T3, None 212 None Forbidden 50 kg C
visible excess of liquid TP33, W31, W40
[[Page 246]]
Metal hydrides, flammable, 4.1 UN3182 II 4.1 A1, IB4, T3, TP33, W31, 151 212 240 15 kg 50 kg E
n.o.s W40
......... III 4.1 A1, IB4, T1, TP33, W31 151 213 240 25 kg 100 kg E
Metal hydrides, water reactive, 4.3 UN1409 I 4.3 A19, N34, N40, W32 None 211 242 Forbidden 15 kg D 13, 52,
n.o.s 148
......... II 4.3 A19, IB4, N34, N40, T3, 151 212 242 15 kg 50 kg D 13, 52,
TP33, W31, W40 148
Metal powder, self-heating, 4.2 UN3189 II 4.2 IB6, IP2, T3, TP33, W31 None 212 241 15 kg 50 kg C 13, 148
n.o.s
......... III 4.2 B135, IB8, IP4, T1, None 213 241 25 kg 100 kg C 13, 148
TP33, W31
Metal powders, flammable, n.o.s 4.1 UN3089 II 4.1 IB8, IP2, IP4, T3, 151 212 240 15 kg 50 kg B 13, 74,
TP33, W100 147,
148
......... III 4.1 IB8, IP2, IP4, T1, 151 213 240 25 kg 100 kg B 13, 74,
TP33, W100 147,
148
Metal salts of methyl nitramine Forbidden
(dry)
G Metal salts of organic 4.1 UN3181 II 4.1 A1, IB8, IP2, IP4, T3, 151 212 240 15 kg 50 kg B 40
compounds, flammable, n.o.s TP33, W31
......... III 4.1 A1, IB8, IP3, T1, TP33, 151 213 240 25 kg 100 kg B 40
W31
............................... ......... ................ III 4.1 A1, IB8, IP3, T1, TP33 151 213 240 25 kg 100 kg B 40
Metaldehyde 4.1 UN1332 III 4.1 A1, IB8, IP3, T1, TP33 151 213 240 25 kg 100 kg A
G Metallic substance, water- 4.3 UN3208 I 4.3 A7, IB4, W32 None 211 242 Forbidden 15 kg E 13, 40,
reactive, n.o.s 148
......... II 4.3 A7, IB7, IP2, IP21, T3, 151 212 242 15 kg 50 kg E 13, 40,
TP33, W31 148
......... III 4.3 A7, IB8, IP21, T1, 151 213 241 25 kg 100 kg E 13, 40,
TP33, W31, W40 148
G Metallic substance, water- 4.3 UN3209 I 4.3, 4.2 A7, W32 None 211 242 Forbidden 15 kg E 13, 40,
reactive, self-heating, n.o.s 148
......... II 4.3, 4.2 A7, IB5, IP2, T3, TP33, None 212 242 15 kg 50 kg E 13, 40,
W32, W40 148
......... III 4.3, 4.2 A7, IB8, IP4, T1, TP33, None 213 242 25 kg 100 kg E 13, 40,
W32 148
Methacrylaldehyde, stabilized 3 UN2396 II 3, 6.1 45, 387, IB2, T7, TP1, 150 202 243 1 L 60 L D 25, 40
TP13
[[Page 247]]
Methacrylic acid, stabilized 8 UN2531 II 8 41, 387, IB2, T7, TP1, 154 202 242 1 L 30 L C 25, 40
TP18, TP30
+ Methacrylonitrile, stabilized 6.1 UN3079 I 6.1, 3 2, 387, B9, B14, B32, None 227 244 Forbidden Forbidden D 12, 25,
T20, TP2, TP13, TP38, 40
TP45
Methallyl alcohol 3 UN2614 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Methane and hydrogen, mixtures,
see Hydrogen and methane,
mixtures, etc
Methane, compressed or Natural 2.1 UN1971 ..... 2.1 ....................... 306 302 302 Forbidden 150 kg E 40
gas, compressed (with high
methane content)
Methane, refrigerated liquid 2.1 UN1972 ..... 2.1 T75, TP5 None None 318 Forbidden Forbidden D 40
(cryogenic liquid) or Natural
gas, refrigerated liquid
(cryogenic liquid), with high
methane content)
Methanesulfonyl chloride 6.1 UN3246 I 6.1, 8 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40
TP2, TP13, TP38, TP45
+ I Methanol 3 UN1230 II 3, 6.1 IB2, T7, TP2 150 202 242 1 L 60 L B 40
D Methanol 3 UN1230 II 3 IB2, T7, TP2 150 202 242 1 L 60 L B 40
Methazoic acid Forbidden
4-Methoxy-4-methylpentan-2-one 3 UN2293 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
1-Methoxy-2-propanol 3 UN3092 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
+ Methoxymethyl isocyanate 6.1 UN2605 I 6.1, 3 1, B9, B14, B30, T20, None 226 244 Forbidden Forbidden D 40
TP2, TP13, TP38, TP44
Methyl acetate 3 UN1231 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Methyl acetylene and propadiene 2.1 UN1060 ..... 2.1 387, N88, T50 306 304 314, 315 Forbidden 150 kg B 25, 40
mixtures, stabilized
Methyl acrylate, stabilized 3 UN1919 II 3 387, IB2, T4, TP1, TP13 150 202 242 5 L 60 L C 25
Methyl alcohol, see Methanol
Methyl allyl chloride 3 UN2554 II 3 IB2, T4, TP1, TP13 150 202 242 5 L 60 L E
Methyl amyl ketone, see Amyl
methyl ketone
Methyl bromide 2.3 UN1062 ..... 2.3 3, B14, N86, T50 None 193 314, 315 Forbidden Forbidden D 40
Methyl bromide and chloropicrin
mixtures with more than 2
percent chloropicrin, see
Chloropicrin and methyl
bromide mixtures
Methyl bromide and chloropicrin
mixtures with not more than 2
percent chloropicrin, see
Methyl bromide
Methyl bromide and ethylene 6.1 UN1647 I 6.1 2, B9, B14, B32, N65, None 227 244 Forbidden Forbidden D 40
dibromide mixtures, liquid T20, TP2, TP13, TP38,
TP44
Methyl bromoacetate 6.1 UN2643 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L D 40
2-Methylbutanal 3 UN3371 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
2-Methyl-1-butene 3 UN2459 I 3 T11, TP2 None 201 243 1 L 30 L E
2-Methyl-2-butene 3 UN2460 II 3 IB2, IP8, T7, TP1 None 202 242 5 L 60 L E
[[Page 248]]
3-Methyl-1-butene 3 UN2561 I 3 T11, TP2 None 201 243 1 L 30 L E
Methyl tert-butyl ether 3 UN2398 II 3 IB2, T7, TP1 150 202 242 5 L 60 L E
Methyl butyrate 3 UN1237 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Methyl chloride or Refrigerant 2.1 UN1063 ..... 2.1 N86, T50 306 304 314, 315 5 kg 100 kg D 40
gas R 40
Methyl chloride and
chloropicrin mixtures, see
Chloropicrin and methyl
chloride mixtures
Methyl chloride and methylene 2.1 UN1912 ..... 2.1 N86, T50 306 304 314, 315 Forbidden 150 kg D 40
chloride mixtures
Methyl chloroacetate 6.1 UN2295 I 6.1, 3 T14, TP2, TP13 None 201 243 1 L 30 L D
Methyl chlorocarbonate, see
Methyl chloroformate
Methyl chloroform, see 1,1,1-
Trichloroethane
Methyl chloroformate 6.1 UN1238 I 6.1, 3, 1, B9, B14, B30, N34, None 226 244 Forbidden Forbidden D 21, 40,
8 T22, TP2, TP13, TP38, 100
TP44
Methyl chloromethyl ether 6.1 UN1239 I 6.1, 3 1, B9, B14, B30, T22, None 226 244 Forbidden Forbidden D 40
TP2, TP13, TP38, TP44
Methyl 2-chloropropionate 3 UN2933 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Methyl dichloroacetate 6.1 UN2299 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Methyl ethyl ether, see Ethyl
methyl ether
Methyl ethyl ketone, see Ethyl
methyl ketone
Methyl ethyl ketone peroxide, Forbidden
in solution with more than 9
percent by mass active oxygen
2-Methyl-5-ethylpyridine 6.1 UN2300 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Methyl fluoride, or Refrigerant 2.1 UN2454 ..... 2.1 ....................... 306 304 314, 315 Forbidden 150 kg E 40
gas R 41
Methyl formate 3 UN1243 I 3 T11, TP2 150 201 243 1 L 30 L E
2-Methyl-2-heptanethiol 6.1 UN3023 I 6.1, 3 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40, 102
TP2, TP13, TP38, TP45
Methyl iodide 6.1 UN2644 I 6.1 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 12, 25,
TP2, TP13, TP38, TP45 40
Methyl isobutyl carbinol 3 UN2053 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
[[Page 249]]
Methyl isobutyl ketone 3 UN1245 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Methyl isobutyl ketone Forbidden
peroxide, in solution with
more than 9 percent by mass
active oxygen
Methyl isocyanate 6.1 UN2480 I 6.1, 3 1, B9, B14, B30, T22, None 226 244 Forbidden Forbidden D 40, 52
TP2, TP13, TP38, TP44
Methyl isopropenyl ketone, 3 UN1246 II 3 387, IB2, T4, TP1 150 202 242 5 L 60 L C 25
stabilized
Methyl isothiocyanate 6.1 UN2477 I 6.1, 3 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40
TP2, TP13, TP38, TP45
Methyl isovalerate 3 UN2400 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Methyl magnesium bromide, in 4.3 UN1928 I 4.3, 3 ....................... None 201 243 Forbidden 1 L D 13, 148
ethyl ether
Methyl mercaptan 2.3 UN1064 ..... 2.3, 2.1 3, B7, B9, B14, N89, None 304 314, 315 Forbidden Forbidden D 40
T50
Methyl mercaptopropionaldehyde, ........ ............ .......... ........ ..........
see 4-Thiapentanal
Methyl methacrylate monomer, 3 UN1247 II 3 387, IB2, T4, TP1 150 202 242 5 L 60 L C 25, 40
stabilized
Methyl nitramine (dry) Forbidden
Methyl nitrate Forbidden
Methyl nitrite Forbidden
Methyl norbornene dicarboxylic
anhydride, see Corrosive
liquids, n.o.s.
Methyl orthosilicate 6.1 UN2606 I 6.1, 3 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40
TP2, TP13, TP38, TP45
D Methyl phosphonic dichloride 6.1 NA9206 I 6.1, 8 2, B9, B14, B32, N34, None 227 244 Forbidden Forbidden C
N43, T20, TP4, TP13,
TP38, TP45
Methyl phosphonothioic
dichloride, anhydrous, see
Corrosive liquid, n.o.s.
D Methyl phosphonous dichloride, 6.1 NA2845 I 6.1, 4.2 2, B9, B14, B16, B32, None 227 244 Forbidden Forbidden D 18
pyrophoric liquid T20, TP4, TP12, TP13,
TP38, TP45
Methyl picric acid (heavy metal Forbidden
salts of)
Methyl propionate 3 UN1248 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Methyl propyl ether 3 UN2612 II 3 IB2, IP8, T7, TP2 150 202 242 5 L 60 L E 40
Methyl propyl ketone 3 UN1249 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Methyl sulfate, see Dimethyl
sulfate
Methyl sulfide, see Dimethyl
sulfide
Methyl trichloroacetate 6.1 UN2533 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Methyl trimethylol methane Forbidden
trinitrate
Methyl vinyl ketone, stabilized 6.1 UN1251 I 6.1, 3, 1, 387, B9, B14, B30, None 226 244 Forbidden Forbidden B 21, 25,
8 T22, TP2, TP13, TP38, 40, 100
TP44
Methylal 3 UN1234 II 3 IB2, IP8, T7, TP2 None 202 242 5 L 60 L E
[[Page 250]]
Methylamine, anhydrous 2.1 UN1061 ..... 2.1 N87, T50 306 304 314, 315 Forbidden 150 kg B 40
Methylamine, aqueous solution 3 UN1235 II 3, 8 B1, IB2, T7, TP1 150 202 243 1 L 5 L E 52,
135.
Methylamine dinitramine and dry Forbidden
salts thereof
Methylamine nitroform Forbidden
Methylamine perchlorate (dry) Forbidden
Methylamyl acetate 3 UN1233 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
N-Methylaniline 6.1 UN2294 III 6.1 IB3, T4, TP2 153 203 241 60 L 220 L A
alpha-Methylbenzyl alcohol, 6.1 UN2937 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
liquid
alpha-Methylbenzyl alcohol, 6.1 UN3438 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
solid
3-Methylbutan-2-one 3 UN2397 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
N-Methylbutylamine 3 UN2945 II 3, 8 IB2, T7, TP1 150 202 243 1 L 5 L B 40
Methylchlorosilane 2.3 UN2534 ..... 2.3, 2, B9, B14, N34 None 226 314, 315 Forbidden Forbidden D 17, 40
2.1, 8
Methylcyclohexane 3 UN2296 II 3 B1, IB2, T4, TP2 150 202 242 5 L 60 L B
Methylcyclohexanols, flammable 3 UN2617 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Methylcyclohexanone 3 UN2297 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Methylcyclopentane 3 UN2298 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
D Methyldichloroarsine 6.1 NA1556 I 6.1 2, T20, TP4, TP13, None 192 None Forbidden Forbidden D 40
TP38, TP45
Methyldichlorosilane 4.3 UN1242 I 4.3, 8, A2, A3, A7, B6, B77, None 201 243 Forbidden 1 L D 21, 40,
3 N34, T14, TP2, TP7, 49, 100
TP13, W31
Methylene chloride, see
Dichloromethane
Methylene glycol dinitrate Forbidden
2-Methylfuran 3 UN2301 II 3 IB2, T4, TP1 150 202 242 5 L 60 L E
a-Methylglucoside tetranitrate Forbidden
a-Methylglycerol trinitrate Forbidden
5-Methylhexan-2-one 3 UN2302 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Methylhydrazine 6.1 UN1244 I 6.1, 3, 1, B7, B9, B14, B30, None 226 244 Forbidden Forbidden D 21, 40,
8 B77, N34, T22, TP2, 49, 52
TP13, TP38, TP44 and 100
[[Page 251]]
4-Methylmorpholine or n- 3 UN2535 II 3, 8 B6, IB2, T7, TP1 150 202 243 1 L 5 L B 40
methylmorpholine
Methylpentadienes 3 UN2461 II 3 IB2, T4, TP1 150 202 242 5 L 60 L E
2-Methylpentan-2-ol 3 UN2560 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Methylpentanes, see Hexanes
Methylphenyldichlorosilane 8 UN2437 II 8 T10, TP2, TP7, TP13 None 206 242 Forbidden 30 L C 40
1-Methylpiperidine 3 UN2399 II 3, 8 IB2, T7, TP1 150 202 243 1 L 5 L B 52.
Methyltetrahydrofuran 3 UN2536 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Methyltrichlorosilane 3 UN1250 II 3, 8 A7, B6, B77, N34, T10, None 206 243 Forbidden 5 L B 40
TP2, TP7, TP13
alpha-Methylvaleraldehyde 3 UN2367 II 3 B1, IB2, T4, TP1 150 202 242 5 L 60 L B
Mine rescue equipment
containing carbon dioxide, see
Carbon dioxide
Mines with bursting charge 1.1F UN0136 ..... 1.1F ....................... ............ 62 None Forbidden Forbidden 05 25
Mines with bursting charge 1.1D UN0137 ..... 1.1D ....................... ............ 62 62 Forbidden Forbidden 04 25
Mines with bursting charge 1.2D UN0138 ..... 1.2D ....................... ............ 62 62 Forbidden Forbidden 04 25
Mines with bursting charge 1.2F UN0294 ..... 1.2F ....................... ............ 62 None Forbidden Forbidden 05 25
Mixed acid, see Nitrating acid,
mixtures etc
Mobility aids, see Battery
powered equipment or Battery
powered vehicle'
D Model rocket motor 1.4C NA0276 ..... 1.4C 51 None 62 None Forbidden 75 kg 02 25
D Model rocket motor 1.4S NA0323 ..... 1.4S 51 None 62 None 25 kg 100 kg 01 25
Molybdenum pentachloride 8 UN2508 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg C 40
Monochloroacetone Forbidden
(unstabilized)
Monochloroethylene, see Vinyl
chloride, stabilized
Monoethanolamine, see
Ethanolamine, solutions
Monoethylamine, see Ethylamine
Morpholine 8 UN2054 I 8, 3 A6, T10, TP2 None 201 243 0.5 L 2.5 L A
Morpholine, aqueous, mixture,
see Corrosive liquids, n.o.s.
Motor fuel anti-knock compounds
see Motor fuel anti-knock
mixtures
+ Motor fuel anti-knock mixture, 6.1 UN3483 I 6.1, 3 14, T14, TP2, TP13 None 201 244 Forbidden Forbidden D 25, 40
flammable
+ Motor fuel anti-knock mixtures 6.1 UN1649 I 6.1 14, B9, B90, T14, TP2, None 201 244 Forbidden 30 L D 25, 40
TP13
Motor spirit, see Gasoline
Muriatic acid, see Hydrochloric
acid
Musk xylene, see 5-tert-Butyl-
2,4,6-trinitro-m-xylene
Naphtha see Petroleum
distillates n.o.s.
Naphthalene, crude or 4.1 UN1334 III 4.1 A1, B120,IB8, IP3, T1, 151 213 240 25 kg 100 kg A
Naphthalene, refined TP33
[[Page 252]]
Naphthalene diozonide Forbidden
beta-Naphthylamine, solid 6.1 UN1650 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
beta-Naphthylamine solution 6.1 UN3411 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
............................... ......... ................ III 6.1 IB2, T7, TP2 153 203 241 60 L 220 L A
alpha-Naphthylamine 6.1 UN2077 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Naphthalene, molten 4.1 UN2304 III 4.1 IB1, T1, TP3 151 213 241 Forbidden Forbidden C
Naphthylamineperchlorate Forbidden
Naphthylthiourea 6.1 UN1651 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Naphthylurea 6.1 UN1652 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Natural gases (with high
methane content), see Methane,
etc. (UN 1971, UN 1972)
Neohexane, see Hexanes
Neon, compressed 2.2 UN1065 ..... 2.2 ....................... 306, 307 302 None 75 kg 150 kg A
Neon, refrigerated liquid 2.2 UN1913 ..... 2.2 T75, TP5 320 316 None 50 kg 500 kg D
(cryogenic liquid)
New explosive or explosive
device, see Sec. Sec.
173.51 and 173.56
Nickel carbonyl 6.1 UN1259 I 6.1, 3 1 None 198 None Forbidden Forbidden D 40, 78
Nickel cyanide 6.1 UN1653 II 6.1 IB8, IP2, IP4, N74, 153 212 242 25 kg 100 kg A 52
N75, T3, TP33
Nickel nitrate 5.1 UN2725 III 5.1 A1, IB8, IP3, T1, TP33 152 213 240 25 kg 100 kg A
Nickel nitrite 5.1 UN2726 III 5.1 A1, IB8, IP3, T1, TP33 152 213 240 25 kg 100 kg A 56, 58
Nickel picrate Forbidden
Nicotine 6.1 UN1654 II 6.1 IB2 153 202 243 5 L 60 L A
G Nicotine compounds, liquid, 6.1 UN3144 I 6.1 A4 None 201 243 1 L 30 L B 40
n.o.s. or Nicotine
preparations, liquid, n.o.s
......... ................ II 6.1 IB2, T11, TP2, TP27 153 202 243 5 L 60 L B 40
......... ................ III 6.1 IB3, T7, TP1, TP28 153 203 241 60 L 220 L B 40
G Nicotine compounds, solid, 6.1 UN1655 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg B
n.o.s. or Nicotine
preparations, solid, n.o.s
......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Nicotine compounds, solid, 6.1 UN1655 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg B
n.o.s. or Nicotine
preparations, solid, n.o.s.
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
[[Page 253]]
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Nicotine hydrochloride liquid 6.1 UN1656 II 6.1 IB2 153 202 243 5 L 60 L A
or solution
............................... ......... ................ III 6.1 IB3 153 203 241 60 L 220 L A
Nicotine hydrochloride, solid 6.1 UN3444 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Nicotine salicylate 6.1 UN1657 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Nicotine sulfate solution 6.1 UN1658 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
............................... ......... ................ III 6.1 IB3, T7, TP2 153 203 241 60 L 220 L A
Nicotine sulphate, solid 6.1 UN3445 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Nicotine tartrate 6.1 UN1659 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Nitrated paper (unstable) Forbidden
Nitrates, inorganic, aqueous 5.1 UN3218 II 5.1 58, IB2, T4, TP1 152 202 242 1 L 5 L B 56, 58,
solution, n.o.s. 133
............................... ......... ................ III 5.1 58, IB2, T4, TP1 152 203 241 2.5 L 30 L B 56, 58,
133
Nitrates, inorganic, n.o.s. 5.1 UN1477 II 5.1 IB8, IP2, IP4, T3, TP33 152 212 240 5 kg 25 kg A 56, 58
............................... ......... ................ III 5.1 IB8, IP3, T1, TP33 152 213 240 25 kg 100 kg A 56, 58
Nitrates of diazonium compounds Forbidden
Nitrating acid mixtures, spent 8 UN1826 I 8, 5.1 A7, T10, TP2, TP13 None 158 243 Forbidden 2.5 L D 40, 66
with more than 50 percent
nitric acid
Nitrating acid mixtures spent 8 UN1826 II 8 A7, B2, IB2, T8, TP2 None 158 242 Forbidden 30 L D 40
with not more than 50 percent
nitric acid
Nitrating acid mixtures with 8 UN1796 I 8, 5.1 A7, T10, TP2, TP13 None 158 243 Forbidden 2.5 L D 40, 66
more than 50 percent nitric
acid
Nitrating acid mixtures with 8 UN1796 II 8 A7, B2, IB2, T8, TP2, None 158 242 Forbidden 30 L D 40
not more than 50 percent TP13
nitric acid
Nitric acid other than red 8 UN2031 II 8, 5.1 A6, B2, B47, B53, IB2, None 158 242 Forbidden 30 L D 66, 74,
fuming, with at least 65 IP15, T8, TP2 89, 90
percent, but not more than 70
percent nitric acid
Nitric acid other than red 8 UN2031 II 8 A6, A212, B2, B47, B53, None 158 242 Forbidden 30 L D 44, 66,
fuming, with more than 20 IB2, IP15, T8, TP2 74, 89,
percent and less than 65 90
percent nitric acid
Nitric acid other than red 8 UN2031 II 8 A6, B2, B47, B53, IB2, None 158 242 1 L 30 L D
fuming with not more than 20 T8, TP2
percent nitric acid
+ Nitric acid, red fuming 8 UN2032 I 8, 5.1, 2, B9, B32, T20, TP2, None 227 244 Forbidden Forbidden D 40, 66,
6.1 TP13, TP38, TP45 74, 89,
90
Nitric acid other than red 8 UN2031 I 8, 5.1 A3, B47, B53, T10, TP2, None 158 243 Forbidden 2.5 L D 44, 66,
fuming, with more than 70 TP12, TP13 89, 90,
percent nitric acid 110,
111
Nitric oxide, compressed 2.3 UN1660 ..... 2.3, 1, B77 None 337 None Forbidden Forbidden D 40, 89,
5.1, 8 90
Nitric oxide and dinitrogen 2.3 UN1975 ..... 2.3, 1, B77 None 337 None Forbidden Forbidden D 40, 89,
tetroxide mixturesor Nitric 5.1, 8 90
oxide and nitrogen dioxide
mixtures
G Nitriles, flammable, toxic, 3 UN3273 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L E 40, 52
n.o.s.
[[Page 254]]
............................... ......... ................ II 3, 6.1 IB2, T11, TP2, TP13, 150 202 243 1 L 60 L B 40, 52
TP27
G Nitrites, inorganic, aqueous 5.1 UN3219 II 5.1 148, IB1, T4, TP1 152 202 242 1 L 5 L B 46, 56,
solution, n.o.s 58, 133
............................... ................ III 5.1 IB2, T4, TP1 152 203 241 2.5 L 30 L B 46, 56,
58, 133
G Nitrites, inorganic, n.o.s 5.1 UN2627 II 5.1 33, IB8, IP2, IP4, T3, 152 212 None 5 kg 25 kg A 46, 56,
TP33 58, 13
G Nitriles, liquid, toxic, n.o.s. 6.1 UN3276 I 6.1 5, T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 52
II 6.1 IB2, T11, TP2, TP27 153 202 243 5 L 60 L B 52
III 6.1 IB3, T7, TP1, TP28 153 203 241 60 L 220 L A 52
G Nitriles, solid, toxic, n.o.s. 6.1 UN3439 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg D 52
II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B 52
III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 52
G Nitriles, toxic, flammable, 6.1 UN3275 I 6.1, 3 5, T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40, 52
n.o.s.
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40, 52
TP27
3-Nitro-4- 6.1 UN2307 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 40
chlorobenzotrifluoride
6-Nitro-4-diazotoluene-3- Forbidden
sulfonic acid (dry)
Nitro isobutane triol Forbidden
trinitrate
N-Nitro-N-methylglycolamide Forbidden
nitrate
2-Nitro-2-methylpropanol Forbidden
nitrate
Nitro urea 1.1D UN0147 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
N-Nitroaniline Forbidden
+ Nitroanilines (o-; m-; p-;) 6.1 UN1661 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Nitroanisole, liquid 6.1 UN2730 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Nitroanisoles, solid 6.1 UN3458 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
+ Nitrobenzene 6.1 UN1662 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 40
m-Nitrobenzene diazonium Forbidden
perchlorate
Nitrobenzenesulfonic acid 8 UN2305 II 8 B2, B4, IB8, IP2, IP4, 154 202 242 1 L 30 L A
T3, TP33
Nitrobenzol, see Nitrobenzene
5-Nitrobenzotriazol 1.1D UN0385 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
Nitrobenzotrifluorides, liquid 6.1 UN2306 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 40
[[Page 255]]
Nitrobenzotrifluorides, solid 6.1 UN3431 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
Nitrobromobenzenes, liquid 6.1 UN2732 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Nitrobromobenzenes, solid 6.1 UN3459 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Nitrocellulose, dry or wetted 1.1D UN0340 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25, 27E
with less than 25 percent
water (or alcohol), by mass
Nitrocellulose, with not more 4.1 UN2557 II 4.1 44, W31 151 212 240 1 kg 15 kg D 28, 36
than 12.6 percent nitrogen, by
dry mass mixture with or
without plasticizer, with or
without pigment
Nitrocellulose membrane 4.1 UN3270 II 4.1 43, A1 151 212 240 1 kg 15 kg D
filters, with not more than
12.6% nitrogen, by dry mass
Nitrocellulose, plasticized 1.3C UN0343 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25
with not less than 18 percent
plasticizing substance, by
mass
Nitrocellulose, solution, 3 UN2059 I 3 198, T11, TP1, TP8, None 201 243 1 L 30 L E
flammable with not more than TP27
12.6 percent nitrogen, by
mass, and not more than 55
percent nitrocellulose
............................... ......... ................ II 3 198, IB2, T4, TP1, TP8 150 202 242 5 L 60 L B
............................... ......... ................ III 3 198, B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Nitrocellulose, unmodified or 1.1D UN0341 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25, 27E
plasticized with less than 18
percent plasticizing
substance, by mass
Nitrocellulose, wetted with not 1.3C UN0342 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25
less than 25 percent alcohol,
by mass
Nitrocellulose with alcohol 4.1 UN2556 II 4.1 W31 151 212 None 1 kg 15 kg D 28, 36
with not less than 25 percent
alcohol by mass, and with not
more than 12.6 percent
nitrogen, by dry mass
Nitrocellulose with water with 4.1 UN2555 II 4.1 W31 151 212 None 15 kg 50 kg E 28, 36
not less than 25 percent water
by mass
Nitrochlorobenzene, see
Chloronitrobenzenes etc
Nitrocresols, liquid 6.1 UN3434 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Nitrocresols, solid 6.1 UN2446 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A .......
Nitroethane 3 UN2842 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Nitroethyl nitrate Forbidden
Nitroethylene polymer Forbidden
Nitrogen, compressed 2.2 UN1066 ..... 2.2 ....................... 306, 307 302 314, 315 75 kg 150 kg A
Nitrogen dioxide, see
Dinitrogen tetroxide
Nitrogen fertilizer solution,
see Fertilizer ammoniating
solution etc
[[Page 256]]
Nitrogen peroxide, see ........ ............ .......... ........ ..........
Dinitrogen tetroxide
Nitrogen, refrigerated liquid 2.2 UN1977 ..... 2.2 345, 346, T75, TP5 320 316 318 50 kg 500 kg D
cryogenic liquid
Nitrogen tetroxide and nitric
oxide mixtures, see Nitric
oxide and nitrogen tetroxide
mixtures
Nitrogen tetroxide, see
Dinitrogen tetroxide
Nitrogen trichloride Forbidden
Nitrogen trifluoride 2.2 UN2451 ..... 2.2, 5.1 ....................... None 302 None 75 kg 150 kg D 40
Nitrogen triiodide Forbidden
Nitrogen triiodide monoamine Forbidden
Nitrogen trioxide 2.3 UN2421 ..... 2.3, 1 None 336 245 Forbidden Forbidden D 40, 89,
5.1, 8 90
Nitroglycerin, desensitized 1.1D UN0143 ..... 1.1D, 125 None 62 None Forbidden Forbidden 04 25, 21E
with not less than 40 percent 6.1
non-volatile water insoluble
phlegmatizer, by mass
Nitroglycerin, liquid, not Forbidden
desensitized
Nitroglycerin mixture, 3 UN3343 ..... 3 129 None 214 None Forbidden Forbidden D
desensitized, liquid,
flammable, n.o.s. with not
more than 30 percent
nitroglycerin, by mass
Nitroglycerin mixture, 3 UN3357 II 3 142 None 202 243 5 L 60 L E
desensitized, liquid, n.o.s.
with not more than 30%
nitroglycerin, by mass
Nitroglycerin mixture, 4.1 UN3319 II 4.1 118 None None None Forbidden 0.5 kg E
desensitized, solid, n.o.s.
with more than 2 percent but
not more than 10 percent
nitroglycerin, by mass
Nitroglycerin, solution in 3 UN3064 II 3 N8 None 202 None Forbidden 5 L E
alcohol, with more than 1
percent but not more than 5
percent nitroglycerin
[[Page 257]]
Nitroglycerin, solution in 1.1D UN0144 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25, 21E
alcohol, with more than 1
percent but not more than 10
percent nitroglycerin
Nitroglycerin solution in 3 UN1204 II 3 IB2, N34 150 202 None 5 L 60 L B
alcohol with not more than 1
percent nitroglycerin
Nitroguanidine nitrate Forbidden
Nitroguanidine or Picrite, dry 1.1D UN0282 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
or wetted with less than 20
percent water, by mass
Nitroguanidine, wetted or 4.1 UN1336 I 4.1 23, A8, A19, A20, N41, None 211 None 1 kg 15 kg E 28, 36
Picrite, wetted with not less W31
than 20 percent water, by mass
1-Nitrohydantoin Forbidden
Nitrohydrochloric acid 8 UN1798 I 8 A3, B10, N41, T10, TP2, None 201 243 Forbidden 2.5 L D 40, 66,
TP13 74, 89,
90
Nitromannite (dry) Forbidden
Nitromannite, wetted, see
Mannitol hexanitrate, etc
Nitromethane 3 UN1261 II 3 ....................... 150 202 None Forbidden 60 L A
Nitromuriatic acid, see
Nitrohydrochloric acid
Nitronaphthalene 4.1 UN2538 III 4.1 A1, IB8, IP3, T1, TP33 151 213 240 25 kg 100 kg A
+ Nitrophenols (o-; m-; p-;) 6.1 UN1663 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
m-Nitrophenyldinitro methane Forbidden
4-Nitrophenylhydrazine, with 4.1 UN3376 I 4.1 162, A8, A19, A20, N41, None 211 None Forbidden 15 kg E 28, 36
not less than 30 percent W31
water, by mass
Nitropropanes 3 UN2608 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
p-Nitrosodimethylaniline 4.2 UN1369 II 4.2 A19, A20, IB6, IP2, None 212 241 15 kg 50 kg D 34
N34, T3, TP33
Nitrostarch, dry or wetted with 1.1D UN0146 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
less than 20 percent water, by
mass
Nitrostarch, wetted with not 4.1 UN1337 I 4.1 23, A8, A19, A20, N41, None 211 None 1 kg 15 kg D 28, 36
less than 20 percent water, by W31
mass
Nitrosugars (dry) Forbidden
Nitrosyl chloride 2.3 UN1069 ..... 2.3, 8 3, B14 None 304 314, 315 Forbidden Forbidden D 40
Nitrosylsulfuric acid, liquid 8 UN2308 II 8 A3, A6, A7, B2, IB2, 154 202 242 1 L 30 L D 40, 66,
N34, T8, TP2 74, 89,
90
Nitrosylsulphuric acid, solid 8 UN3456 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg D 40, 66,
74, 89,
90
Nitrotoluenes, liquid 6.1 UN1664 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
Nitrotoluenes, solid 6.1 UN3446 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Nitrotoluidines (mono) 6.1 UN2660 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Nitrotriazolone or NTO 1.1D UN0490 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
[[Page 258]]
Nitrous oxide 2.2 UN1070 ..... 2.2, 5.1 A14 306 304 314, 315 75 kg 150 kg A 40
Nitrous oxide, refrigerated 2.2 UN2201 ..... 2.2, 5.1 B6, T75, TP5, TP22 None 304 314, 315 Forbidden Forbidden D 40
liquid
Nitroxylenes, liquid 6.1 UN1665 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
Nitroxylenes, solid 6.1 UN3447 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Nitroxylol, see Nitroxylenes
Nonanes 3 UN1920 III 3 B1, IB3, T2, TP2 150 203 242 60 L 220 L A
Non-flammable gas, n.o.s., see
Compressed gas, etc. or
Liquefied gas, etc
Nonliquefied gases, see
Compressed gases, etc
Nonliquefied hydrocarbon gas,
see Hydrocarbon gas mixture,
compressed, n.o.s.
Nonyltrichlorosilane 8 UN1799 II 8 A7, B2, B6, N34, T10, None 206 242 Forbidden 30 L C 40
TP2, TP7, TP13
Nordhausen acid, see Sulfuric
acid, fuming etc
2,5-Norbornadiene, stabilized,
see Bicyclo [2,2,1] hepta-2,5-
diene, stabilized
Octadecyltrichlorosilane 8 UN1800 II 8 A7, B2, B6, N34, T10, None 206 242 Forbidden 30 L C 40
TP2, TP7, TP13
Octadiene 3 UN2309 II 3 B1, IB2, T4, TP1 150 202 242 5 L 60 L B
1,7-Octadine-3,5-diyne-1,8- Forbidden
dimethoxy-9-octadecynoic acid
Octafluorobut-2-ene or 2.2 UN2422 ..... 2.2 ....................... None 304 314, 315 75 kg 150 kg A
Refrigerant gas R 1318
Octafluorocyclobutane, or 2.2 UN1976 ..... 2.2 T50 None 304 314, 315 75 kg 150 kg A
Refrigerant gas RC 318
Octafluoropropaneor Refrigerant 2.2 UN2424 ..... 2.2 T50 None 304 314, 315 75 kg 150 kg A
gas R 218
Octanes 3 UN1262 II 3 IB2, T4, TP2 150 202 242 5 L 60 L B
Octogen, etc. see
Cyclotetramethylene
tetranitramine, etc.
[[Page 259]]
Octolite or Octol, dry or 1.1D UN0266 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
wetted with less than 15
percent water, by mass
Octonal 1.1D UN0496 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
Octyl aldehydes 3 UN1191 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Octyltrichlorosilane 8 UN1801 II 8 A7, B2, B6, N34, T10, None 206 242 Forbidden 30 L C 40
TP2, TP7, TP13
Oil gas, compressed 2.3 UN1071 ..... 2.3, 2.1 6 None 304 314, 315 Forbidden 25 kg D 40
Oleum, see Sulfuric acid,
fuming
Organic peroxide type A, liquid Forbidden
or solid
G Organic peroxide type B, liquid 5.2 UN3101 ..... 5.2, 1 53 152 225 None Forbidden Forbidden D 12, 25,
52, 53
G Organic peroxide type B, 5.2 UN3111 ..... 5.2, 1 53 None 225 None Forbidden Forbidden D 2, 25,
liquid, temperature controlled 52, 53
G Organic peroxide type B, solid 5.2 UN3102 ..... 5.2, 1 53 152 225 None Forbidden Forbidden D 12, 25,
52, 53
G Organic peroxide type B, solid, 5.2 UN3112 ..... 5.2, 1 53 None 225 None Forbidden Forbidden D 2, 25,
temperature controlled 52, 53
G Organic peroxide type C, liquid 5.2 UN3103 ..... 5.2 ....................... 152 225 None 5 L 10 L D 12, 25,
52, 53
G Organic peroxide type C, 5.2 UN3113 ..... 5.2 ....................... None 225 None Forbidden Forbidden D 2, 25,
liquid, temperature controlled 52, 53
G Organic peroxide type C, solid 5.2 UN3104 ..... 5.2 ....................... 152 225 None 5 kg 10 kg D 12, 25,
52, 53
G Organic peroxide type C, solid, 5.2 UN3114 ..... 5.2 ....................... None 225 None Forbidden Forbidden D 2, 25,
temperature controlled 52, 53
G Organic peroxide type D, liquid 5.2 UN3105 ..... 5.2 ....................... 152 225 None 5 L 10 L D 12, 25,
52, 53
G Organic peroxide type D, 5.2 UN3115 ..... 5.2 ....................... None 225 None Forbidden Forbidden D 2, 25,
liquid, temperature controlled 52, 53
G Organic peroxide type D, solid 5.2 UN3106 ..... 5.2 ....................... 152 225 None 5 kg 10 kg D 12, 25,
52, 53
G Organic peroxide type D, solid, 5.2 UN3116 ..... 5.2 ....................... None 225 None Forbidden Forbidden D 2, 25,
temperature controlled 52, 53
G Organic peroxide type E, liquid 5.2 UN3107 ..... 5.2 A61 152 225 None 10 L 25 L D 12, 25,
52, 53
G Organic peroxide type E, 5.2 UN3117 ..... 5.2 ....................... None 225 None Forbidden Forbidden D 2, 25,
liquid, temperature controlled 52, 53
G Organic peroxide type E, solid 5.2 UN3108 ..... 5.2 ....................... 152 225 None 10 kg 25 kg D 12, 25,
52, 53
G Organic peroxide type E, solid, 5.2 UN3118 ..... 5.2 ....................... None 225 None Forbidden Forbidden D 2, 25,
temperature controlled 52, 53
G Organic peroxide type F, liquid 5.2 UN3109 ..... 5.2 A61, IP5 152 225 225 10 L 25 L D 12, 25,
52, 53
G Organic peroxide type F, 5.2 UN3119 ..... 5.2 IP5 None 225 225 Forbidden Forbidden D 2, 25,
liquid, temperature controlled 52, 53
G Organic peroxide type F, solid 5.2 UN3110 ..... 5.2 TP33 152 225 225 10 kg 25 kg D 12, 25,
52, 53
[[Page 260]]
G Organic peroxide type F, solid, 5.2 UN3120 ..... 5.2 TP33 None 225 225 Forbidden Forbidden D 2, 25,
temperature controlled 52, 53
D Organic phosphate, mixed with 2.3 NA1955 ..... 2.3 3 None 334 None Forbidden Forbidden D 40
compressed gas or Organic
phosphate compound, mixed with
compressed gas or Organic
phosphorus compound, mixed
with compressed gas
Organic pigments, self-heating 4.2 UN3313 II 4.2 IB8, IP2, IP4, T3, TP33 None 212 241 15 kg 50 kg C
............................... ......... ................ III 4.2 IB8, IP3, T1, TP33 None 213 241 25 kg 100 kg C
G Organoarsenic compound, liquid, 6.1 UN3280 I 6.1 5, T14, TP2, TP13, TP27 None 201 242 1 L 30 L B
n.o.s.
II 6.1 IB2, T11, TP2, TP27 153 202 242 5 L 60 L B
III 6.1 IB3, T7, TP1, TP28 153 203 241 60 L 220 L A
G Organoarsenic compound, solid, 6.1 UN3465 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg B
n.o.s.
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Organochlorine pesticides 3 UN2762 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L B 40
liquid, flammable, toxic,
flash point less than 23
degrees C
............................... ......... ................ II 3, 6.1 IB2, T11, TP2, TP13, 150 202 243 1 L 60 L B 40
TP27
Organochlorine pesticides, 6.1 UN2996 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
liquid, toxic
............................... ......... ................ II 6.1 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1 IB3, T7, TP2, TP28 153 203 241 60 L 220 L A 40
Organochlorine pesticides, 6.1 UN2995 I 6.1, 3 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
liquid, toxic, flammable,
flash point not less than 23
degrees C
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1, 3 B1, IB3, T7, TP2, TP28 153 203 242 60 L 220 L A 40
Organochlorine pesticides, 6.1 UN2761 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 40
solid, toxic
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
[[Page 261]]
G Organometallic compound, 6.1 UN3282 I 6.1 T14, TP2, TP13, TP27 None 201 242 1 L 30 L B
liquid, toxic, n.o.s
II 6.1 IB2, T11, TP2, TP27 153 202 242 5 L 60 L B
III 6.1 IB3, T7, TP1, TP28 153 203 241 60 L 220 L A
G Organometallic compound, solid, 6.1 UN3467 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg B
toxic, n.o.s
II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B
III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
G Organometallic substance, 4.2 UN3392 I 4.2 B11, T21, TP2, TP7, None 181 244 Forbidden Forbidden D 13, 78,
liquid, pyrophoric TP36 148
G Organometallic substance, 4.2 UN3394 I 4.2, 4.3 B11, T21, TP2, TP7, None 181 244 Forbidden Forbidden D 13, 52,
liquid, pyrophoric, water- TP36, TP47 78, 148
reactive
G Organometallic substance, 4.3 UN3398 I 4.3 T13, TP2, TP7, TP36, None 201 244 Forbidden 1 L D 13, 40,
liquid, water-reactive TP47, W31 52, 148
......... II 4.3 IB1, IP2, T7, TP2, TP7, None 202 243 1 L 5 L D 13, 40,
TP36, TP47, W31 52, 148
......... III 4.3 IB2, IP4, T7, TP2, TP7, None 203 242 5 L 60 L E 13, 40,
TP36, TP47, W31 52, 148
G Organometallic substance, 4.3 UN3399 I 4.3, 3 T13, TP2, TP7, TP36, None 201 244 Forbidden 1 L D 13, 40,
liquid, water-reactive, TP47, W31 52, 148
flammable
......... II 4.3, 3 IB1, IP2, T7, TP2, TP7, None 202 243 1 L 5 L D 13, 40,
TP36, TP47, W31 52, 148
......... III 4.3, 3 IB2, IP4, T7, TP2, TP7, None 203 242 5 L 60 L E 13, 40,
TP36, TP47, W31 52, 148
G Organometallic substance, 4.2 UN3391 I 4.2 T21, TP7, TP33, TP36 None 187 244 Forbidden Forbidden D 13, 148
solid, pyrophoric
G Organometallic substance, 4.2 UN3393 I 4.2, 4.3 B11, T21, TP7, TP33, None 187 244 Forbidden Forbidden D 13, 52,
solid, pyrophoric, water- TP36, TP47 148
reactive
G Organometallic substance, 4.2 UN3400 II 4.2 IB6, T3, TP33, TP36 None 212 242 15 kg 50 kg C
solid, self-heating
III 4.2 IB8, T1, TP33, TP36 None 213 242 25 kg 100 kg C
G Organometallic substance, 4.3 UN3395 I 4.3 N40, T9, TP7, TP33, None 211 242 Forbidden 15 kg E 13, 40,
solid, water-reactive TP36, TP47, W31 52, 148
......... II 4.3 IB4, T3, TP33, TP36, 151 212 242 15 kg 50 kg E 13, 40,
TP47, W31 52, 148
......... III 4.3 IB6, T1, TP33, TP36, 151 213 241 25 kg 100 kg E 13, 40,
TP47, W31 52, 148
G Organometallic substance, 4.3 UN3396 I 4.3, 4.1 N40, T9, TP7, TP33, None 211 242 Forbidden 15 kg E 13, 40,
solid, water-reactive, TP36, TP47, W31 52, 148
flammable
......... II 4.3, 4.1 IB4, T3, TP33, TP36, 151 212 242 15 kg 50 kg E 13, 40,
TP47, W31 52, 148
......... III 4.3, 4.1 IB6, T1, TP33, TP36, 151 213 241 25 kg 100 kg E 13, 40,
TP47, W31 52, 148
G Organometallic substance, 4.3 UN3397 I 4.3, 4.2 N40, T9, TP7, TP33, None 211 242 Forbidden 15 kg E 13, 40,
solid, water-reactive, self- TP36, TP47, W31 52, 148
heating
......... II 4.3, 4.2 IB4, T3, TP33, TP36, None 212 242 15 kg 50 kg E 13, 40,
TP47, W31 52, 148
......... III 4.3, 4.2 IB6, T1, TP33, TP36, None 213 241 25 kg 100 kg E 13, 40,
TP47, W31 52, 148
[[Page 262]]
Organophosphorus compound, 6.1 UN3279 I 6.1, 3 5, T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
toxic, flammable, n.o.s.
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
G Organophosphorus compound, 6.1 UN3278 I 6.1 5, T14, TP2, TP13, TP27 None 201 243 1 L 30 L B
liquid, toxic, n.o.s
II 6.1 IB2, T11, TP2, TP27 153 202 243 5 L 60 L B
III 6.1 IB3, T7, TP1, TP28 153 203 241 60 L 220 L A
G Organophosphorus compound, 6.1 UN3464 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg B
solid, toxic, n.o.s
II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B
III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Organophosphorus pesticides, 3 UN2784 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L B 40
liquid, flammable, toxic,
flash point less than 23
degrees C
............................... ......... ................ II 3, 6.1 IB2, T11, TP2, TP13, 150 202 243 1 L 60 L B 40
TP27
Organophosphorus pesticides, 6.1 UN3018 I 6.1 N76, T14, TP2, TP13, None 201 243 1 L 30 L B 40
liquid, toxic TP27
............................... ......... ................ II 6.1 IB2, N76, T11, TP2, 153 202 243 5 L 60 L B 40
TP13, TP27
............................... ......... ................ III 6.1 IB3, N76, T7, TP2, TP28 153 203 241 60 L 220 L A 40
Organophosphorus pesticides, 6.1 UN3017 I 6.1, 3 N76, T14, TP2, TP13, None 201 243 1 L 30 L B 40
liquid, toxic, flammable, TP27
flash point not less than 23
degrees C
............................... ......... ................ II 6.1, 3 IB2, N76, T11, TP2, 153 202 243 5 L 60 L B 40
TP13, TP27
............................... ......... ................ III 6.1, 3 B1, IB3, N76, T7, TP2, 153 203 242 60 L 220 L A 40
TP28
Organophosphorus pesticides, 6.1 UN2783 I 6.1 IB7, IP1, N77, T6, TP33 None 211 242 5 kg 50 kg A 40
solid, toxic
............................... ......... ................ II 6.1 IB8, IP2, IP4, N77, T3, 153 212 242 25 kg 100 kg A 40
TP33
............................... ......... ................ III 6.1 IB8, IP3, N77, T1, TP33 153 213 240 100 kg 200 kg A 40
Organotin compounds, liquid, 6.1 UN2788 I 6.1 A3, N33, N34, T14, TP2, None 201 243 1 L 30 L B 40
n.o.s. TP13, TP27
............................... ......... ................ II 6.1 A3, IB2, N33, N34, T11, 153 202 243 5 L 60 L A 40
TP2, TP13, TP27
[[Page 263]]
............................... ......... ................ III 6.1 IB3, T7, TP2, TP28 153 203 241 60 L 220 L A 40
Organotin compounds, solid, 6.1 UN3146 I 6.1 A5, IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg B 40
n.o.s.
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
Organotin pesticides, liquid, 3 UN2787 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L B 40
flammable, toxic, flash point
less than 23 degrees C
............................... ......... ................ II 3, 6.1 IB2, T11, TP2, TP13, 150 202 243 1 L 60 L B 40
TP27
Organotin pesticides, liquid, 6.1 UN3020 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
toxic
............................... ......... ................ II 6.1 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1 IB3, T7, TP2, TP28 153 203 241 60 L 220 L A 40
Organotin pesticides, liquid, 6.1 UN3019 I 6.1, 3 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
toxic, flammable, flash point
not less than 23 degrees C
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1, 3 B1, IB3, T7, TP2, TP28 153 203 242 60 L 220 L A 40
Organotin pesticides, solid, 6.1 UN2786 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 40
toxic
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
Orthonitroaniline, see
Nitroanilines etc
Osmium tetroxide 6.1 UN2471 I 6.1 A8, IB7, IP1, N33, N34, None 211 242 5 kg 50 kg B 40
T6, TP33, W31
D G Other regulated substances, 9 NA3082 III 9 A189, IB3, T2, TP1 155 203 241 No limit No limit A
liquid, n.o.s
D G Other regulated substances, 9 NA3077 III 9 384, B54, IB8, IP2, T1, 155 213 240 No limit No limit A
solid, n.o.s TP33
G Oxidizing liquid, corrosive, 5.1 UN3098 I 5.1, 8 62, A6 None 201 244 Forbidden 2.5 L D 13, 56,
n.o.s 58, 138
II 5.1, 8 62, IB1 None 202 243 1 L 5 L B 13, 56,
58, 138
III 5.1, 8 62, IB2 152 203 242 2.5 L 30 L B 13, 56,
58, 138
G Oxidizing liquid, n.o.s 5.1 UN3139 I 5.1 62, 127, A2, A6 None 201 243 Forbidden 2.5 L D 56, 58,
138
............................... ................ II 5.1 62, 127, 148, A2, IB2 152 202 242 1 L 5 L B 56, 58,
138
............................... ................ III 5.1 62, 127, 148, A2, IB2 152 203 241 2.5 L 30 L B 56, 58,
138
G Oxidizing liquid, toxic, n.o.s 5.1 UN3099 I 5.1, 6.1 62, A6 None 201 244 Forbidden 2.5 L D 56, 58,
138
II 5.1, 6.1 62, IB1 152 202 243 1 L 5 L B 56, 58,
95, 138
III 5.1, 6.1 62, IB2 152 203 242 2.5 L 30 L B 56, 58,
95, 138
G Oxidizing solid, corrosive, 5.1 UN3085 I 5.1, 8 62 None 211 242 1 kg 15 kg D 13, 56,
n.o.s 58, 138
[[Page 264]]
II 5.1, 8 62, IB6, IP2, T3, TP33 152 212 242 5 kg 25 kg B 13, 34,
56, 58,
138
III 5.1, 8 62, IB8, IP3, T1, TP33 152 213 240 25 kg 100 kg B 13, 34,
56, 58,
138
G Oxidizing solid, flammable, 5.1 UN3137 I 5.1, 4.1 62 None 214 214 Forbidden Forbidden .......... 13,
n.o.s 147,
148
G Oxidizing solid, n.o.s. 5.1 UN1479 I 5.1 62, IB5, IP1 None 211 242 1 kg 15 kg D 56, 58,
106,
138
............................... ................ II 5.1 62, IB8, IP2, IP4, T3, 152 212 240 5 kg 25 kg B 56, 58,
TP33 106,
138
............................... ................ III 5.1 62, 148, IB8, IP3, T1, 152 213 240 25 kg 100 kg B 56, 58,
TP33 106,
138
G Oxidizing solid, self-heating, 5.1 UN3100 I 5.1, 4.2 62 None 214 214 Forbidden Forbidden
n.o.s.
II 5.1, 4.2 62 None 214 214 Forbidden Forbidden
G Oxidizing solid, toxic, n.o.s. 5.1 UN3087 I 5.1, 6.1 62 None 211 242 1 kg 15 kg D 56, 58,
138
II 5.1, 6.1 62, IB6, IP2, T3, TP33 152 212 242 5 kg 25 kg B 56, 58,
138
III 5.1, 6.1 62, IB8, IP3, T1, TP33 152 213 240 25 kg 100 kg B 56, 58,
138
G Oxidizing solid, water 5.1 UN3121 ..... 5.1, 4.3 62 None 214 214 Forbidden Forbidden .......... 13, 148
reactive, n.o.s
Oxygen, compressed 2.2 UN1072 ..... 2.2, 5.1 110, A14 306 302 314, 315 75 kg 150 kg A
Oxygen difluoride, compressed 2.3 UN2190 ..... 2.3, 1, N86 None 304 None Forbidden Forbidden D 13, 40,
5.1, 8 89, 90
[[Page 265]]
Oxygen generator, chemical 5.1 UN3356 ..... 5.1 ....................... None 168 None Forbidden 25 kg D 56, 58,
(including when contained in 69, 106
associated equipment, e.g.,
passenger service units
(PSUs), portable breathing
equipment (PBE), etc)
+ Oxygen generator, chemical, 9 NA3356 III 9 61 None 213 None Forbidden Forbidden A
spent
Oxygen, refrigerated liquid 2.2 UN1073 ..... 2.2, 5.1 T75, TP5, TP22 320 316 318 Forbidden Forbidden D
(cryogenic liquid)
Paint including paint, lacquer, 3 UN1263 I 3 367, T11, TP1, TP8, 150 201 243 1 L 30 L E
enamel, stain, shellac TP27
solutions, varnish, polish,
liquid filler and liquid
lacquer base
II 3 149, 367, 383, B52, 150 173 242 5 L 60 L B
B131, IB2, T4, TP1,
TP8, TP28
III 3 367, B1, B52, B131, 150 173 242 60 L 220 L A
IB3, T2, TP1, TP29
Paint or Paint related material 8 UN3066 II 8 367, B2, IB2, T7, TP2, 154 173 242 1 L 30 L A 40
TP28
III 8 367, B52, IB3, T4, TP1, 154 173 241 5 L 60 L A 40
TP29
Paint, corrosive, flammable 8 UN3470 II 8, 3 367, IB2, T7, TP2, TP8, 154 202 243 1 L 30 L B 40
(including paint, lacquer, TP28
enamel, stain, shellac,
varnish, polish, liquid
filler, and liquid lacquer
base)
Paint, flammable, corrosive, 3 UN3469 I 3, 8 367, T11, TP2, TP27 None 201 243 0.5 L 2.5 L E 40
(including paint , lacquer,
enamel, stain, shellac,
varnish, polish, liquid filler
and liquid lacquer base)
II 3, 8 367, IB2, T7, TP2, TP8, 150 202 243 1 L 5 L B 40
TP28
III 3, 8 367, IB3, T4, TP1, TP29 150 203 242 5 L 60 L A 40
Paint related material 3 UN1263 I 3 367, T11, TP1, TP8, 150 201 243 1 L 30 L E
including paint thinning, TP27
drying, removing, or reducing
compound
3 UN1263 II 3 149, 367, 383, B52, 150 173 242 5 L 60 L B
B131, IB2, T4, TP1,
TP8, TP28
III 3 367, B1, B52, B131, 150 173 242 60 L 220 L A
IB3, T2, TP1, TP29
Paint related material 8 UN3470 II 8, 3 367, IB2, T7, TP2, TP8, 154 202 243 1 L 30 L B 40
corrosive, flammable TP28
(including paint thinning or
reducing compound)
Paint related material, 3 UN3469 I 3, 8 367, T11, TP2, TP27 None 201 243 0.5 L 2.5 L E 40
flammable, corrosive
(including paint thinning or
reducing compound)
II 3, 8 367, IB2, T7, TP2, TP8, 150 202 243 1 L 5 L B 40
TP28
III 3, 8 367, IB3, T4, TP1, TP29 150 203 242 5 L 60 L A 40
[[Page 266]]
Paper, unsaturated oil treated 4.2 UN1379 III 4.2 IB8, IP3, W31 None 213 241 Forbidden Forbidden A
incompletely dried (including
carbon paper)
Paraformaldehyde 4.1 UN2213 III 4.1 A1, B120, IB8, IP3, T1, 151 213 240 25 kg 100 kg A
TP33
Paraldehyde 3 UN1264 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Paranitroaniline, solid, see
Nitroanilines etc
D Parathion and compressed gas 2.3 NA1967 ..... 2.3 3 None 334 245 Forbidden Forbidden E 40
mixture
Paris green, solid, see Copper
acetoarsenite
PCB, see Polychlorinated
biphenyls
+ Pentaborane 4.2 UN1380 I 4.2, 6.1 1 None 205 245 Forbidden Forbidden D 13, 148
Pentachloroethane 6.1 UN1669 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 40
Pentachlorophenol 6.1 UN3155 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Pentaerythrite tetranitrate Forbidden
(dry)
Pentaerythrite tetranitrate 4.1 UN3344 II 4.1 118, N85 None 214 None Forbidden Forbidden E
mixture, desensitized, solid,
n.o.s. or Pentaerythritol
tetranitrate mixture,
desensitized, solid, n.o.s. or
PETN mixture, desensitized,
solid, n.o.s., with more than
10 percent but not more than
20 percent PETN, by mass
Pentaerythrite tetranitrate or 1.1D UN0411 ..... 1.1D 120 None 62 None Forbidden Forbidden 04 25
Pentaerythritol tetranitrate
or PETN, with not less than 7
percent wax by mass
[[Page 267]]
Pentaerythrite tetranitrate, 1.1D UN0150 ..... 1.1D 121 None 62 None Forbidden Forbidden 04 25
wetted or Pentaerythritol
tetranitrate, wetted, or PETN,
wetted with not less than 25
percent water, by mass, or
Pentaerythrite tetranitrate,
or Pentaerythritol
tetranitrate or PETN,
desensitized with not less
than 15 percent phlegmatizer
by mass
Pentaerythritol tetranitrate,
see Pentaerythrite
tetranitrate, etc
Pentafluoroethane or 2.2 UN3220 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
Refrigerant gas R 125
Pentamethylheptane 3 UN2286 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Pentane-2,4-dione 3 UN2310 III 3, 6.1 B1, IB3, T4, TP1 150 203 242 60 L 220 L A
Pentanes 3 UN1265 I 3 T11, TP2 150 201 243 1 L 30 L E
............................... ......... ................ II 3 IB2, IP8, T4, TP1 150 202 242 5 L 60 L E
Pentanitroaniline (dry) Forbidden
Pentanols 3 UN1105 II 3 IB2, T4, TP1, TP29 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, B3, IB3, T2, TP1 150 203 242 60 L 220 L A
1-Pentene (n-amylene) 3 UN1108 I 3 T11, TP2 150 201 243 1 L 30 L E
1-Pentol 8 UN2705 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L B 26, 27
Pentolite, dry or wetted with 1.1D UN0151 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
less than 15 percent water, by
mass
Pepper spray, see Aerosols,
etc. or Self-defense spray,
non-pressurized
Perchlorates, inorganic, 5.1 UN3211 II 5.1 IB2, T4, TP1 152 202 242 1 L 5 L B 56, 58,
aqueous solution, n.o.s. 133
............................... ......... ................ III 5.1 IB2, T4, TP1 152 202 241 2.5 L 30 L B 56, 58,
69, 133
Perchlorates, inorganic, n.o.s. 5.1 UN1481 II 5.1 IB6, IP2, T3, TP33 152 212 242 5 kg 25 kg A 56, 58
............................... ......... ................ III 5.1 IB8, IP3, T1, TP33 152 213 240 25 kg 100 kg A 56, 58
Perchloric acid, with more than Forbidden
72 percent acid by mass
Perchloric acid with more than 5.1 UN1873 I 5.1, 8 A2, A3, N41, T10, TP1 None 201 243 Forbidden 2.5 L D 66
50 percent but not more than
72 percent acid, by mass
Perchloric acid with not more 8 UN1802 II 8, 5.1 IB2, N41, T7, TP2 None 202 243 Forbidden 30 L C 66
than 50 percent acid by mass
Perchloroethylene, see
Tetrachloroethylene
Perchloromethyl mercaptan 6.1 UN1670 I 6.1 2, B9, B14, B32, N34, None 227 244 Forbidden Forbidden D 40
T20, TP2, TP13, TP38,
TP45
Perchloryl fluoride 2.3 UN3083 ..... 2.3, 5.1 2, B9, B14 None 302 314, 315 Forbidden Forbidden D 40
Percussion caps, see Primers,
cap type
[[Page 268]]
Perfluoro-2-butene, see
Octafluorobut-2-ene
Perfluoro(ethyl vinyl ether) 2.1 UN3154 ..... 2.1 ....................... 306 302, 304, 314, 315 Forbidden 150 kg E 40
305
Perfluoro(methyl vinyl ether) 2.1 UN3153 ..... 2.1 T50 306 302, 304, 314, 315 Forbidden 150 kg E 40
305
Perfumery products with 3 UN1266 II 3 149, IB2, T4, TP1, TP8 150 202 242 15 L 60 L B
flammable solvents
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
G Permanganates, inorganic, 5.1 UN3214 II 5.1 26, 353, IB2, T4, TP1 152 202 242 1 L 5 L D 56, 58,
aqueous solution, n.o.s 133,
138
G Permanganates, inorganic, n.o.s 5.1 UN1482 II 5.1 26, 353, A30, IB6, IP2, 152 212 242 5 kg 25 kg D 56, 58,
T3, TP33 138
......... ................ III 5.1 26, 353, A30, IB8, IP3, 152 213 240 25 kg 100 kg D 56, 58,
T1, TP33 13
Permeation devices for
calibrating air quality
monitoring equipment See Sec.
173.175
Peroxides, inorganic, n.o.s 5.1 UN1483 II 5.1 A7, A20, IB6, IP2, N34, None 212 242 5 kg 25 kg C 13, 52,
T3, TP33, W100 66, 75,
148
......... III 5.1 A7, A20, B134, IB8, 152 213 240 25 kg 100 kg C 13, 52,
IP21, N34, T1, TP33, 66, 75,
W100 148
Peroxyacetic acid, with more Forbidden
than 43 percent and with more
than 6 percent hydrogen
peroxide
Persulfates, inorganic, aqueous 5.1 UN3216 III 5.1 IB2, T4, TP1, TP29 152 203 241 2.5 L 30 L A 56, 58,
solution, n.o.s 133
Persulfates, inorganic, n.o.s. 5.1 UN3215 III 5.1 IB8, IP3, T1, TP33 152 213 240 25 kg 100 kg A 56, 58
G Pesticides, liquid, flammable, 3 UN3021 I 3, 6.1 B5, T14, TP2, TP13, None 201 243 Forbidden 30 L B 40
toxic, flash point less than TP27
23 degrees C
II 3, 6.1 IB2, T11, TP2, TP13, 150 202 243 1 L 60 L B 40
TP27
[[Page 269]]
G Pesticides, liquid, toxic, 6.1 UN2903 I 6.1, 3 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
flammable, n.o.s. flash point
not less than 23 degrees C
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1, 3 B1, IB3, T7, TP2 153 203 242 60 L 220 L A 40
G Pesticides, liquid, toxic, 6.1 UN2902 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
n.o.s.
............................... ......... ................ II 6.1 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1 IB3, T7, TP2, TP28 153 203 241 60 L 220 L A 40
G Pesticides, solid, toxic, 6.1 UN2588 I 6.1 IB7, T6, TP33 None 211 242 5 kg 50 kg A 40
n.o.s.
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
PETN, see Pentaerythrite
tetranitrate
PETN/TNT, see Pentolite, etc
Petrol, see Gasoline
Petroleum crude oil 3 UN1267 I 3 144, 357, T11, TP1, TP8 150 201 243 1 L 30 L E
......... ................ II 3 144, 357, IB2, T4, TP1, 150 202 242 5 L 60 L B
TP8
......... ................ III 3 144, 357, B1, IB3, T2, 150 203 242 60 L 220 L A
TP1
Petroleum distillates, n.o.s. 3 UN1268 I 3 144, T11, TP1, TP8 150 201 243 1 L 30 L E
or Petroleum products, n.o.s.
............................... ......... ................ II 3 144, IB2, T7, TP1, TP8, 150 202 242 5 L 60 L B
TP28
............................... ......... ................ III 3 144, B1, IB3, T4, TP1, 150 203 242 60 L 220 L A
TP29
Petroleum gases, liquefied or 2.1 UN1075 ..... 2.1 T50, N95 306 304 314, 315 Forbidden 150 kg E 40
Liquefied petroleum gas
D Petroleum oil 3 NA1270 I 3 144, T11, TP1 None 201 243 1 L 30 L E
II 3 144, IB2, T7, TP1, TP8, 150 202 242 5 L 60 L B
TP28
III 3 144, B1, IB3, T4, TP1, 150 203 242 60 L 220 L A
TP29
I Petroleum sour crude oil, 3 UN3494 I 3, 6.1 343, T14, TP2, TP13 None 201 243 Forbidden 30 L D 40
flammable, toxic
II 3, 6.1 343, IB2, T7, TP2 150 202 243 1 L 60 L D 40
III 3, 6.1 343, IB3, T4, TP1 150 203 242 60 L 220 L C 40
Phenacyl bromide 6.1 UN2645 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B 40
+ Phenetidines 6.1 UN2311 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Phenol, molten 6.1 UN2312 II 6.1 B14, T7, TP3 None 202 243 Forbidden Forbidden B 40
+ Phenol, solid 6.1 UN1671 II 6.1 IB8, IP2, IP4, N78, T3, 153 212 242 25 kg 100 kg A
TP33
Phenol solutions 6.1 UN2821 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
............................... ......... ................ III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Phenolsulfonic acid, liquid 8 UN1803 II 8 B2, IB2, N41, T7, TP2 154 202 242 1 L 30 L C 14
[[Page 270]]
Phenoxyacetic acid derivative 3 UN3346 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L B 40
pesticide, liquid, flammable,
toxic flash point less than 23
degrees C
............................... ......... ................ II 3, 6.1 IB2, T11, TP2, TP13, 150 202 243 1 L 60 L B 40
TP27
Phenoxyacetic acid derivative 6.1 UN3348 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
pesticide, liquid, toxic
............................... ......... ................ II 6.1 IB2, T11, TP2, TP27 153 202 243 5 L 60 L B 40
............................... ......... ................ III 6.1 IB3, T7, TP2, TP28 153 203 241 60 L 220 L A 40
Phenoxyacetic acid derivative 6.1 UN3347 I 6.1, 3 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
pesticide, liquid, toxic,
flammable, flash point not
less than 23 degrees C
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1, 3 IB3, T7, TP2, TP28 153 203 241 60 L 220 L A 40
Phenoxyacetic acid derivative 6.1 UN3345 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 40
pesticide, solid, toxic
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
Phenyl chloroformate 6.1 UN2746 II 6.1, 8 IB2, T7, TP2, TP13 153 202 243 1 L 30 L A 12, 13,
25, 40
Phenyl isocyanate 6.1 UN2487 I 6.1, 3 2, B9, B14, B32, B77, None 227 244 Forbidden Forbidden D 40
N33, N34, T20, TP2,
TP13, TP38, TP45
Phenyl mercaptan 6.1 UN2337 I 6.1, 3 2, B9, B14, B32, B77, None 227 244 Forbidden Forbidden D 40, 52
T20, TP2, TP13, TP38,
TP45
Phenyl phosphorus dichloride 8 UN2798 II 8 B2, B15, IB2, T7, TP2 154 202 242 Forbidden 30 L B 40
Phenyl phosphorus 8 UN2799 II 8 B2, B15, IB2, T7, TP2 154 202 242 Forbidden 30 L B 40
thiodichloride
Phenyl urea pesticides, liquid, 6.1 UN3002 I 6.1 T14, TP2 TP27 None 201 243 1 L 30 L B 40
toxic
II 6.1 T7, TP2 None 202 243 5 L 60 L B 40
III 6.1 T4, TP1 153 203 241 60 L 220 L A 40
Phenylacetonitrile, liquid 6.1 UN2470 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A 52
Phenylacetyl chloride 8 UN2577 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L C 40
Phenylcarbylamine chloride 6.1 UN1672 I 6.1 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40
TP2, TP13, TP38, TP45
[[Page 271]]
m-Phenylene Forbidden
diaminediperchlorate (dry)
+ Phenylenediamines (o-; m-; p-;) 6.1 UN1673 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Phenylhydrazine 6.1 UN2572 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 40
Phenylmercuric acetate 6.1 UN1674 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
G Phenylmercuric compounds, 6.1 UN2026 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A
n.o.s.
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Phenylmercuric hydroxide 6.1 UN1894 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Phenylmercuric nitrate 6.1 UN1895 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Phenyltrichlorosilane 8 UN1804 II 8 A7, B6, N34, T10, TP2, None 206 242 Forbidden 30 L C 40
TP7, TP13
Phosgene 2.3 UN1076 ..... 2.3, 8 1, B7, B46, N86 None 192 314 Forbidden Forbidden D 40
9-Phosphabicyclononanes or 4.2 UN2940 II 4.2 A19, IB6, IP2, T3, None 212 241 15 kg 50 kg A
Cyclooctadiene phosphines TP33, W31
Phosphine 2.3 UN2199 ..... 2.3, 2.1 1 None 192 245 Forbidden Forbidden D 40
Phosphine, adsorbed 2.3 UN3525 ..... 2.3, 2.1 1 None 302c None Forbidden Forbidden D 40
Phosphoric acid solution 8 UN1805 III 8 A7, IB3, N34, T4, TP1 154 203 241 5 L 60 L A
Phosphoric acid, solid 8 UN3453 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
Phosphoric acid
triethyleneimine, see Tris-(1-
aziridiyl)phosphine oxide,
solution
Phosphoric anhydride, see
Phosphorus pentoxide
Phosphorous acid 8 UN2834 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A 25
Phosphorus, amorphous 4.1 UN1338 III 4.1 A1, A19, B1, B9, B26, None 213 243 25 kg 100 kg A 74
IB8, IP3, T1, TP33
Phosphorus bromide, see
Phosphorus tribromide
Phosphorus chloride, see
Phosphorus trichloride
Phosphorus heptasulfide, free 4.1 UN1339 II 4.1 A20, IB4, N34, T3, None 212 240 15 kg 50 kg B 13, 74,
from yellow or white TP33, W31 147,
phosphorus 148
Phosphorus oxybromide 8 UN1939 II 8 B8, IB8, IP2, IP4, N41, None 212 240 Forbidden 50 kg C 12, 25,
N43, T3, TP33 40
Phosphorus oxybromide, molten 8 UN2576 II 8 B2, B8, IB1, N41, N43, None 202 242 Forbidden Forbidden C 40
T7, TP3, TP13
+ Phosphorous oxychloride 6.1 UN1810 I 6.1, 8 2, B9, B14, B32, B77, None 227 244 Forbidden Forbidden D 40
N34, T20, TP2, TP13,
TP38, TP45
Phosphorus pentabromide 8 UN2691 II 8 A7, IB8, IP2, IP4, N34, 154 212 240 Forbidden 50 kg B 12, 25,
T3, TP33 40, 53,
55
Phosphorus pentachloride 8 UN1806 II 8 A7, IB8, IP2, IP4, N34, None 212 240 Forbidden 50 kg C 40, 44,
T3, TP33 89,
100,
141
[[Page 272]]
Phosphorus Pentafluoride 2.3 UN2198 ..... 2.3, 8 2, B9, B14 None 302, 304 314, 315 Forbidden Forbidden D 40
Phosphorus pentafluoride, 2.3 UN3524 ..... 2.3, 8 2, B9, B14 None 302c None Forbidden Forbidden D 40
adsorbed
Phosphorus pentasulfide, free 4.3 UN1340 II 4.3, 4.1 A20, B59, IB4, T3, 151 212 242 15 kg 50 kg B 13, 74,
from yellow or white TP33, W31, W40 148
phosphorus
Phosphorus pentoxide 8 UN1807 II 8 A7, IB8, IP2, IP4, N34, 154 212 240 15 kg 50 kg A
T3, TP33
Phosphorus sesquisulfide, free 4.1 UN1341 II 4.1 A20, IB4, N34, T3, None 212 240 15 kg 50 kg B 74
from yellow or white TP33, W31
phosphorus
Phosphorus tribromide 8 UN1808 II 8 A3, A6, A7, B2, B25, None 202 242 Forbidden 30 L C 40
IB2, N34, N43, T7, TP2
Phosphorus trichloride 6.1 UN1809 I 6.1, 8 2, B9, B14, B15, B32, None 227 244 Forbidden Forbidden C 40
B77, N34, T20, TP2,
TP13, TP38, TP45
Phosphorus trioxide 8 UN2578 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A 12, 25
Phosphorus trisulfide, free 4.1 UN1343 II 4.1 A20, IB4, N34, T3, None 212 240 15 kg 50 kg B 13, 74,
from yellow or white TP33, W31 147,
phosphorus 148
Phosphorus, white dry or 4.2 UN1381 I 4.2, 6.1 B9, B26, N34, T9, TP3, None 188 243 Forbidden Forbidden E
Phosphorus, white, under water TP31, W31
or Phosphorus white, in
solution or Phosphorus, yellow
dry or Phosphorus, yellow,
under water or Phosphorus,
yellow, in solution
Phosphorus white, molten 4.2 UN2447 I 4.2, 6.1 B9, B26, N34, T21, TP3, None 188 243 Forbidden Forbidden D
TP7, TP26
Phosphorus (white or red) and a Forbidden
chlorate, mixtures of
Phosphoryl chloride, see
Phosphorus oxychloride
Phthalic anhydride with more 8 UN2214 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
than .05 percent maleic
anhydride
Picolines 3 UN2313 III 3 B1, IB3, T4, TP1 150 203 242 60 L 220 L A 40
Picric acid, see
Trinitrophenol, etc
Picrite, see Nitroguanidine,
etc
Picryl chloride, see
Trinitrochlorobenzene
Pine oil 3 UN1272 III 3 B1, IB3, T2, TP2 150 203 242 60 L 220 L A
[[Page 273]]
alpha-Pinene 3 UN2368 III 3 B1, IB3, T2, TP2 150 203 242 60 L 220 L A
Piperazine 8 UN2579 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A 12, 25,
52
Piperidine 8 UN2401 I 8, 3 A10, T10, TP2 None 201 243 0.5 L 2.5 L B 52
Pivaloyl chloride, see
Trimethylacetyl chloride
Plastic molding compound in 9 UN3314 III 9 32, IB8, IP3, IP7 155 221 221 100 kg 200 kg E 21, 25,
dough, sheet or extruded rope 87, 144
form evolving flammable vapor
Plastic solvent, n.o.s., see
Flammable liquids, n.o.s.
Plastics, nitrocellulose-based, 4.2 UN2006 III 4.2 ....................... None 213 None Forbidden Forbidden C
self-heating, n.o.s.
Poisonous gases, n.o.s., see
Compressed or liquefied gases,
flammable or toxic, n.o.s.
Polyalkylamines, n.o.s., see
Amines, etc
Polyamines, flammable,
corrosive, n.o.s. see Amines,
flammable, corrosive, n.o.s
Polyamines, liquid, corrosive,
n.o.s. see Amines, liquid,
corrosive, n.o.s
Polyamines, liquid, corrosive,
flammable, n.o.s. see Amines,
liquid, corrosive, flammable,
n.o.s
Polychlorinated biphenyls, 9 UN2315 II 9 9, 81, 140, IB3, T4, 155 202 241 100 L 220 L A 95
liquid TP1
Polychlorinated biphenyls, 9 UN3432 II 9 9, 81,140, IB8, IP2, 155 212 240 100 kg 200 kg A 95
solid IP4, T3, TP33
Polyester resin kit, liquid 3 UN3269 ..... 3 40, 149 165 165 None 5 kg 5 kg B
base material
Polyester resin kit, solid base 4.1 UN3527 ..... 4.1 40, 157 165 165 None 5 kg 5 kg B
material
Polyhalogenated biphenyls, 9 UN3151 II 9 IB2 155 204 241 100 L 220 L A 95
liquid or Halogenated
monomethyldiphenyl-methanes,
liquid or Polyhalogenated
terphenyls, liquid
Polyhalogenated biphenyls, 9 UN3152 II 9 IB8, IP2, IP4, T3, TP33 155 204 241 100 kg 200 kg A 95
solid or Halogenated
monomethyldiphenyl-methanes,
solid or Polyhalogenated
terphenyls, solid
Polymeric beads expandable, 9 UN2211 III 9 32, IB8, IP3, IP7, T1, 155 221 221 100 kg 200 kg E 21, 25,
evolving flammable vapor TP33 87, 144
G Polymerizing substance, liquid, 4.1 UN3532 III 4.1 387, 421, IB3, IP19, None 203 241 10 L 25 L D 25, 52,
stabilized, n.o.s N92, T7, TP4, TP6 53
G Polymerizing substance, liquid, 4.1 UN3534 III 4.1 387, 421, IB3, IP19, None 203 241 Forbidden Forbidden D 2, 25,
temperature controlled, n.o.s N92, T7, TP4, TP6 52, 53
[[Page 274]]
G Polymerizing substance, solid, 4.1 UN3531 III 4.1 387, 421, IB7, IP19, None 213 240 10 kg 25 kg D 25, 52,
stabilized, n.o.s N92, T7, TP4, TP6, TP33 53
G Polymerizing substance, solid, 4.1 UN3533 III 4.1 387, 421, IB7, IP19, None 213 240 Forbidden Forbidden D 2, 25,
temperature controlled, n.o.s N92, T7, TP4, TP6, TP33 52, 53
Potassium 4.3 UN2257 I 4.3 A7, A19, A20, B27, IB4, 151 211 244 Forbidden 15 kg D 13, 52,
IP1, N6, N34, T9, TP7, 148
TP33, W32
Potassium arsenate 6.1 UN1677 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Potassium arsenite 6.1 UN1678 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Potassium bisulfite solution,
see Bisulfites, aqueous
solutions, n.o.s.
Potassium borohydride 4.3 UN1870 I 4.3 A19, N40, W32 None 211 242 Forbidden 15 kg E 13, 52,
148
Potassium bromate 5.1 UN1484 II 5.1 IB8, IP2, IP4, T3, TP33 152 212 242 5 kg 25 kg A 56, 58
Potassium carbonyl Forbidden
Potassium chlorate 5.1 UN1485 II 5.1 A9, IB8, IP2, IP4, N34, 152 212 242 5 kg 25 kg A 56, 58
T3, TP33
Potassium chlorate, aqueous 5.1 UN2427 II 5.1 A2, IB2, T4, TP1 152 202 241 1 L 5 L B 56, 58,
solution 133
............................... ......... ................ III 5.1 A2, IB2, T4, TP1 152 203 241 2.5 L 30 L B 56, 58,
69, 133
Potassium chlorate mixed with
mineral oil, see Explosive,
blasting, type C
Potassium cuprocyanide 6.1 UN1679 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 52
Potassium cyanide, solid 6.1 UN1680 I 6.1 B69, B77, IB7, IP1, None 211 242 5 kg 50 kg B 52
N74, N75, T6, TP33, W31
Potassium cyanide solution 6.1 UN3413 I 6.1 B69, B77, N74, N75, None 201 243 1 L 30 L B 52
T14, TP2, TP13, W31
......... II 6.1 B69, B77, IB2, N74, 153 202 243 5 L 60 L B 52
N75, T11, TP2, TP13,
TP27, W31
......... III 6.1 B69, B77, IB3, N74, 153 203 241 60 L 220 L A 52
N75, T7, TP2, TP13,
TP28, W31
[[Page 275]]
Potassium dichloro isocyanurate
or Potassium dichloro-s-
triazinetrione, see
Dichloroisocyanuric acid, dry
or Dichloroisocyanuric acid
salts etc
Potassium dithionite or 4.2 UN1929 II 4.2 A8, A19, A20, IB6, IP2, None 212 241 15 kg 50 kg E 13
Potassium hydrosulfite T3, TP33, W31
Potassium fluoride, solid 6.1 UN1812 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 52
Potassium fluoride solution 6.1 UN3422 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A 52
Potassium fluoroacetate 6.1 UN2628 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg E
Potassium fluorosilicate 6.1 UN2655 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 52
Potassium hydrate, see
Potassium hydroxide, solid
Potassium hydrogen fluoride,
see Potassium hydrogen
difluoride
Potassium hydrogen fluoride
solution, see Corrosive
liquid, n.o.s.
Potassium hydrogen sulfate 8 UN2509 II 8 A7, IB8, IP2, IP4, N34, 154 212 240 15 kg 50 kg A
T3, TP33
Potassium hydrogendifluoride 8 UN1811 II 8, 6.1 IB8, IP2, IP4, N3, N34, 154 212 240 15 kg 50 kg A 25, 40,
solid T3, TP33 52
Potassium hydrogendifluoride 8 UN3421 II 8, 6.1 IB2, N3, N34, T7, TP2 154 202 243 1 L 30 L A 25, 40,
solution 52
............................... ......... ................ III 8, 6.1 IB3, N3, N34, T4, TP1 154 203 241 5 L 60 L A 40, 52
Potassium hydrosulfite, see
Potassium dithionite
Potassium hydroxide, liquid,
see Potassium hydroxide
solution
Potassium hydroxide, solid 8 UN1813 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A 52.
Potassium hydroxide, solution 8 UN1814 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L A 52.
III 8 IB3, T4, TP1 154 203 241 5 L 60 L A 52.
Potassium hypochlorite,
solution, see Hypochlorite
solutions, etc
Potassium, metal alloys, liquid 4.3 UN1420 I 4.3 A7, A19, A20, B27, W31 None 201 244 Forbidden 1 L E 13, 40,
52, 148
Potassium, metal alloys, solid 4.3 UN3403 I 4.3 A19, A20, B27, IB4, None 211 244 Forbidden 15 kg D 13, 52,
IP1, T9, TP7, TP33, W32 148
Potassium metavanadate 6.1 UN2864 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Potassium monoxide 8 UN2033 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A 29, 52.
Potassium nitrate 5.1 UN1486 III 5.1 A1, A29, B120 IB8, IP3, 152 213 240 25 kg 100 kg A
T1, TP33, W1
Potassium nitrate and sodium 5.1 UN1487 II 5.1 B78, IB8, IP2, IP4, T3, 152 212 240 5 kg 25 kg A 56, 58
nitrite mixtures TP33
Potassium nitrite 5.1 UN1488 II 5.1 IB8, IP2, IP4, T3, TP33 152 212 242 5 kg 25 kg A 56, 58
Potassium perchlorate 5.1 UN1489 II 5.1 IB6, IP2, T3, TP33 152 212 242 5 kg 25 kg A 56, 58
Potassium permanganate 5.1 UN1490 II 5.1 IB8, IP2, IP4, T3, TP33 152 212 240 5 kg 25 kg D 56, 58,
138
Potassium peroxide 5.1 UN1491 I 5.1 A20, IB6, IP1, N34 None 211 None Forbidden 15 kg C 13, 52,
66, 75,
148
[[Page 276]]
Potassium persulfate 5.1 UN1492 III 5.1 A1, A29, IB8, IP3, T1, 152 213 240 25 kg 100 kg A 58, 145
TP33
Potassium phosphide 4.3 UN2012 I 4.3, 6.1 A19, N40, W32 None 211 None Forbidden 15 kg E 13, 40,
52, 85,
148
Potassium selenate, see
Selenates or Selenites
Potassium selenite, see
Selenates or Selenites
Potassium sodium alloys, liquid 4.3 UN1422 I 4.3 A7, A19, B27, N34, N40, None 201 244 Forbidden 1 L E 13, 40,
T9, TP3, TP7, TP31, W31 52, 148
Potassium sodium alloys, solid 4.3 UN3404 I 4.3 A19, B27, N34, N40, T9, None 211 244 Forbidden 15 kg D 13, 52,
TP7, TP33, W32 148
Potassium sulfide, anhydrous or 4.2 UN1382 II 4.2 A19, A20, B16, IB6, None 212 241 15 kg 50 kg A 52
Potassium sulfide with less IP2, N34, T3, TP33,
than 30 percent water of W31, W40
crystallization
Potassium sulfide, hydrated 8 UN1847 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A 52
with not less than 30 percent
water of crystallization
Potassium superoxide 5.1 UN2466 I 5.1 A20, IB6, IP1 None 211 None Forbidden 15 kg D 13, 52,
66, 75,
148
Powder cake, wetted or Powder 1.1C UN0433 ..... 1.1C ....................... None 62 None Forbidden Forbidden 04 25
paste, wetted with not less
than 17 percent alcohol by
mass
Powder cake, wetted or Powder 1.3C UN0159 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25
paste, wetted with not less
than 25 percent water, by mass
Powder paste, see Powder cake,
etc
Powder, smokeless 1.1C UN0160 ..... 1.1C ....................... None 62 None Forbidden Forbidden 04 25, 26E
Powder, smokeless 1.3C UN0161 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25, 26E
Powder, smokeless 1.4C UN0509 ..... 1.4C 16 171 62 None Forbidden 75 kg 02 25
Power device, explosive, see
Cartridges, power device
[[Page 277]]
Primers, cap type 1.4S UN0044 ..... None ....................... None 62 None 25 kg 100 kg 01 25
Primers, cap type 1.1B UN0377 ..... 1.1B ....................... None 62 None Forbidden Forbidden 05 25
Primers, cap type 1.4B UN0378 ..... 1.4B ....................... None 62 None Forbidden 75 kg 05 25
Primers, small arms, see
Primers, cap type
Primers, tubular 1.3G UN0319 ..... 1.3G ....................... None 62 None Forbidden Forbidden 03 25
Primers, tubular 1.4G UN0320 ..... 1.4G ....................... None 62 None Forbidden 75 kg 02 25
Primers, tubular 1.4S UN0376 ..... None ....................... None 62 None 25 kg 100 kg 01 25
Printing ink, flammable or 3 UN1210 I 3 367, T11, TP1, TP8 150 173 243 1 L 30 L E .......
Printing ink related material
(including printing ink
thinning or reducing
compound), flammable
............................... ................ II 3 149, 367, 383, IB2, T4, 150 173 242 5 L 60 L B .......
TP1, TP8
............................... ................ III 3 367, B1, IB3, T2, TP1 150 173 242 60 L 220 L A .......
Projectiles, illuminating, see
Ammunition, illuminating, etc
Projectiles, inert with tracer 1.4S UN0345 ..... 1.4S ....................... ............ 62 62 25 kg 100 kg 01 25
Projectiles, inert, with tracer 1.3G UN0424 ..... 1.3G ....................... ............ 62 62 Forbidden Forbidden 03 25
Projectiles, inert, with tracer 1.4G UN0425 ..... 1.4G ....................... ............ 62 62 Forbidden 75 kg 02 25
Projectiles, with burster or 1.2D UN0346 ..... 1.2D ....................... ............ 62 62 Forbidden Forbidden 04 25
expelling charge
Projectiles, with burster or 1.4D UN0347 ..... 1.4D ....................... ............ 62 62 Forbidden 75 kg 02 25
expelling charge
Projectiles, with burster or 1.2F UN0426 ..... 1.2F ....................... ............ 62 None Forbidden Forbidden 05 25
expelling charge
Projectiles, with burster or 1.4F UN0427 ..... 1.4F ....................... ............ 62 None Forbidden Forbidden 05 25
expelling charge
Projectiles, with burster or 1.2G UN0434 ..... 1.2G ....................... ............ 62 62 Forbidden Forbidden 03 25
expelling charge
Projectiles, with burster or 1.4G UN0435 ..... 1.4G ....................... ............ 62 62 Forbidden 75 kg 02 25
expelling charge
Projectiles, with bursting 1.1F UN0167 ..... 1.1F ....................... ............ 62 None Forbidden Forbidden 05 25
charge
Projectiles, with bursting 1.1D UN0168 ..... 1.1D ....................... ............ 62 62 Forbidden Forbidden 04 25
charge
Projectiles, with bursting 1.2D UN0169 ..... 1.2D ....................... ............ 62 62 Forbidden Forbidden 04 25
charge
Projectiles, with bursting 1.2F UN0324 ..... 1.2F ....................... ............ 62 None Forbidden Forbidden 05 25
charge
Projectiles, with bursting 1.4D UN0344 ..... 1.4D ....................... ............ 62 62 Forbidden 75 kg 02 25
charge
Propadiene, stabilized 2.1 UN2200 ..... 2.1 387 None 304 314, 315 Forbidden 150 kg B 25, 40
Propadiene mixed with methyl
acetylene, see Methyl
acetylene and propadiene
mixtures, stabilized
Propane, see also Petroleum 2.1 UN1978 ..... 2.1 19, T50, N95 306 304 314, 315 Forbidden 150 kg E 40
gases, liquefied
Propanethiols 3 UN2402 II 3 A6, IB2, T4, TP1, TP13 150 202 242 5 L 60 L E 95, 102
n-Propanol or Propyl alcohol, 3 UN1274 II 3 B1, IB2, T4, TP1 150 202 242 5 L 60 L B
normal
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Propellant, liquid 1.3C UN0495 ..... 1.3C 37 None 62 None Forbidden Forbidden 04 25
Propellant, liquid 1.1C UN0497 ..... 1.1C 37 None 62 None Forbidden Forbidden 04 25
[[Page 278]]
Propellant, solid 1.1C UN0498 ..... 1.1C ....................... None 62 None Forbidden Forbidden 04 25, 26E
Propellant, solid 1.3C UN0499 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25, 26E
Propellant, solid 1.4C UN0501 ..... 1.4C ....................... None 62 None Forbidden 75 kg 02 25
Propionaldehyde 3 UN1275 II 3 IB2, T7, TP1 150 202 242 5 L 60 L E
Propionic acid with not less 8 UN3463 II 8, 3 IB2, T7, TP2 154 202 243 1 L 30 L A.
than 90% acid by mass
Propionic acid with not less 8 UN1848 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A.
than 10% and less than 90%
acid by mass
Propionic anhydride 8 UN2496 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
Propionitrile 3 UN2404 II 3, 6.1 IB2, T7, TP1, TP13 None 202 243 Forbidden 60 L E 40
Propionyl chloride 3 UN1815 II 3, 8 IB1, T7, TP1 150 202 243 1 L 5 L B 40
n-Propyl acetate 3 UN1276 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Propyl alcohol, see Propanol
n-Propyl benzene 3 UN2364 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
n-Propyl chloroformate 6.1 UN2740 I 6.1, 3, 2, B9, B14, B32, B77, None 227 244 Forbidden Forbidden B 21, 40,
8 N34, T20, TP2, TP13, 100
TP38, TP44
Propyl chloride see 1-
Chloropropane
Propyl formates 3 UN1281 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
n-Propyl isocyanate 6.1 UN2482 I 6.1, 3 1, B9, B14, B30, T20, None 226 244 Forbidden Forbidden D 40
TP2, TP13, TP38, TP44
Propyl mercaptan, see
Propanethiols
n-Propyl nitrate 3 UN1865 II 3 IB9 150 202 None 5 L 60 L D 44, 89,
90, 100
Propylamine 3 UN1277 II 3, 8 A7, IB2, N34, T7, TP1 150 202 243 1 L 5 L E 40
Propylene see also Petroleum 2.1 UN1077 ..... 2.1 19, T50 306 304 314, 315 Forbidden 150 kg E 40
gases, liquefied
Propylene chlorohydrin 6.1 UN2611 II 6.1, 3 IB2, T7, TP2, TP13 153 202 243 5 L 60 L A 12, 25,
40
Propylene oxide 3 UN1280 I 3 A3, N34, T11, TP2, TP7 None 201 243 1 L 30 L E 40
Propylene tetramer 3 UN2850 III 3 B1, IB3, T2, TP2 150 203 242 60 L 220 L A
1,2-Propylenediamine 8 UN2258 II 8, 3 A3, A6, IB2, N34, T7, None 202 243 1 L 30 L A 40
TP2
[[Page 279]]
Propyleneimine, stabilized 3 UN1921 I 3, 6.1 387, A3, N34, T14, TP2, None 201 243 1 L 30 L D 25, 40
TP13
Propyltrichlorosilane 8 UN1816 II 8, 3 A7, B2, B6, N34, T10, None 206 243 Forbidden 30 L C 40
TP2, TP7, TP13
Prussic acid, see Hydrogen
cyanide
Pyrethroid pesticide, liquid, 3 UN3350 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L B 40
flammable, toxic, flash point
less than 23 degrees C
............................... ......... ................ II 3, 6.1 IB2, T11, TP2, TP13, 150 202 243 1 L 60 L B 40
TP27
Pyrethroid pesticide, liquid 6.1 UN3352 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
toxic
II 6.1 IB2, T11, TP2, TP27 153 202 243 5L 60L B 40
III 6.1 IB3, T7, TP2, TP28 153 203 241 60L 220L A 40
Pyrethroid pesticide, liquid, 6.1 UN3351 I 6.1, 3 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
toxic, flammable, flash point
not less than 23 degrees C
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1, 3 IB3, T7, TP2, TP28 153 203 241 60 L 220 L B 40
Pyrethroid pesticide, solid, 6.1 UN3349 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 40
toxic
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
Pyridine 3 UN1282 II 3 IB2, T4, TP2 None 202 242 5 L 60 L B 21, 100
Pyridine perchlorate Forbidden
G Pyrophoric liquid, inorganic, 4.2 UN3194 I 4.2 ....................... None 181 244 Forbidden Forbidden D 13, 78,
n.o.s 148
G Pyrophoric liquids, organic, 4.2 UN2845 I 4.2 B11, T22, TP2, TP7, W31 None 187 244 Forbidden Forbidden D 13, 78,
n.o.s 148
G Pyrophoric metals, n.o.s., or 4.2 UN1383 I 4.2 B11, T21, TP7, TP33, None 187 242 Forbidden Forbidden D 13, 148
Pyrophoric alloys, n.o.s W31
G Pyrophoric solid, inorganic, 4.2 UN3200 I 4.2 T21, TP7, TP33, W31 None 187 242 Forbidden Forbidden D 13, 148
n.o.s
G Pyrophoric solids, organic, 4.2 UN2846 I 4.2 W31 None 187 242 Forbidden Forbidden D 13, 148
n.o.s
Pyrosulfuryl chloride 8 UN1817 II 8 B2, IB2, T8, TP2 154 202 242 1 L 30 L C 40
Pyroxylin solution or solvent,
see Nitrocellulose
Pyrrolidine 3 UN1922 II 3, 8 IB2, T7, TP1 150 202 243 1 L 5 L B 40, 52
Quebrachitol pentanitrate Forbidden ................ ..... ........ .......................
Quicklime, see Calcium oxide
Quinoline 6.1 UN2656 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A 12, 25
R 12, see
Dichlorodifluoromethane
R 12B1, see
Chlorodifluorobromomethane
R 13, see
Chlorotrifluoromethane
R 13B1, see
Bromotrifluoromethane
R 14, see Tetrafluoromethane
R 21, see Dichlorofluoromethane
R 22, see Chlorodifluoromethane
R 114, see
Dichlorotetrafluoroethane
[[Page 280]]
R 115, see
Chloropentafluoroethane
R 116, see Hexafluoroethane
R 124, see
Chlorotetrafluoroethane
R 133a, see
Chlorotrifluoroethane
R 152a, see Difluoroethane
R 500, see
Dichlorodifluoromethane and
difluorethane, etc
R 502, see
Chlorodifluoromethane and
chloropentafluoroethane
mixture, etc
R 503, see
Chlorotrifluoromethane and
trifluoromethane, etc
Radioactive material, excepted 7 UN2909 ..... None ....................... 422, 426 422, 426 422, 426 .......... .......... A
package-articles manufactured
from natural uranium or
depleted uranium or natural
thorium
Radioactive material, excepted 7 UN2908 ..... Empty ....................... 422, 428 422, 428 422, 428 .......... .......... A
package-empty packaging
Radioactive material, excepted 7 UN2911 ..... None ....................... 422, 424 422, 424 ........ .......... .......... A
package-instruments or
articles
Radioactive material, excepted 7 UN2910 ..... None 368 421, 422 421, 422 421, 422 .......... .......... A
package-limited quantity of
material
Radioactive material, low 7 UN2912 ..... 7 A56, T5, TP4, W7 421, 422, 427 427 .......... .......... A 95, 129
specific activity (LSA-I) non 428
fissile or fissile-excepted
Radioactive material, low 7 UN3321 ..... 7 A56, T5, TP4, W7 421, 422, 427 427 .......... .......... A 95, 129
specific activity (LSA-II) non 428
fissile or fissile-excepted
Radioactive material, low 7 UN3322 ..... 7 A56, T5, TP4, W7 421, 422, 427 427 .......... .......... A 95, 150
specific activity (LSA-III) 428
non fissile or fissile
excepted
Radioactive material, surface 7 UN2913 ..... 7 A56 421, 422, 427 427 .......... .......... A 95
contaminated objects (SCO-I or 428
SCO-II) non fissile or fissile-
excepted
[[Page 281]]
Radioactive material, 7 UN2919 ..... 7 A56, 139 ............ .......... ........ .......... .......... A 95, 105
transported under special
arrangement, non fissile or
fissile excepted
Radioactive material, 7 UN3331 ..... 7 A56, 139 ............ .......... ........ .......... .......... A 95, 105
transported under special
arrangement, fissile
Radioactive material, Type A 7 UN3327 ..... 7 A56, W7, W8 453 417 417 .......... .......... A 95,
package, fissile non-special 105,
form 131
Radioactive material, Type A 7 UN2915 ..... 7 A56, W7, W8 None 415, 418, 415, .......... .......... A 95, 130
package non-special form, non 419 418,
fissile or fissile-excepted 419
Radioactive material, Type A 7 UN3332 ..... 7 A56, W7, W8 ............ 415, 476 415, 476 .......... .......... A 95
package, special form non
fissile or fissile-excepted
Radioactive material, Type A 7 UN3333 ..... 7 A56, W7, W8 453 417, 476 417, 476 .......... .......... A 95, 105
package, special form, fissile
Radioactive material, Type B(M) 7 UN3329 ..... 7 A56 453 417 417 .......... .......... A 95, 105
package, fissile
Radioactive material, Type B(M) 7 UN2917 ..... 7 A56 ............ 416 416 .......... .......... A 95, 105
package non fissile or fissile-
excepted
Radioactive material, Type B(U) 7 UN3328 ..... 7 A56 453 417 417 .......... .......... A 95, 105
package, fissile
Radioactive material, Type B(U) 7 UN2916 ..... 7 A56 ............ 416 416 .......... .......... A 95, 105
package non fissile or fissile-
excepted
Radioactive material, uranium 7 UN2978 ..... 7, 6.1, ....................... 423 420, 427 420, 427 .......... .......... B 40, 95,
hexafluoride non fissile or 8 132
fissile-excepted
Radioactive material, uranium 7 UN2977 ..... 7, 6.1, ....................... 453 417, 420 417, 420 .......... .......... B 40, 95,
hexafluoride, fissile 8 132
A W Rags, oily 4.2 UN1856 III 4.2 ....................... 151 213 240 Forbidden Forbidden A
Railway torpedo, see Signals,
railway track, explosive
RC 318, see
Octafluorocyclobutane
RDX and
cyclotetramethylenetetranitram
ine, wetted or desensitized
see RDX and HMX mixtures,
wetted or desensitized
RDX and HMX mixtures, wetted 1.1D UN0391 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
with not less than 15 percent
water by mass or RDX and HMX
mixtures, desensitized with
not less than 10 percent
phlegmatizer by mass
RDX and Octogen mixtures,
wetted or desensitized see RDX
and HMX mixtures, wetted or
desensitized etc
[[Page 282]]
RDX, see Cyclotrimethylene
trinitramine, etc
Receptacles, small, containing 2.1 UN2037 ..... 2.1 ....................... 306 304 None 1 kg 15 kg B 40
gas or gas cartridges
(flammable) without release
device, not refillable and not
exceeding 1 L capacity
Receptacles, small, containing 2.2 UN2037 ..... 2.2 ....................... 306 304 None 1 kg 15 kg B 40
gas or gas cartridges(non-
flammable) without release
device, not refillable and not
exceeding 1 L capacity
Receptacles, small, containing 2.2 UN2037 ..... 2.2, 5.1 A14 306 304 None 1 kg 15 kg B 40
gas or gas cartridges
(oxidizing) without release
device, not refillable and not
exceeding 1 L capacity
Red phosphorus, see Phosphorus,
amorphous
Refrigerant gas R 404A 2.2 UN3337 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
Refrigerant gas R 407A 2.2 UN3338 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
Refrigerant gas R 407B 2.2 UN3339 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
Refrigerant gas R 407C 2.2 UN3340 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
G Refrigerant gases, n.o.s. 2.2 UN1078 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
D Refrigerant gases, n.o.s. or 2.1 NA1954 ..... 2.1 T50 306 304 314, 315 Forbidden 150 kg D 40
Dispersant gases, n.o.s.
Refrigerating machines, 2.1 UN3358 ..... 2.1 ....................... 306, 307 306 306 Forbidden Forbidden D 40
containing flammable, non-
toxic, liquefied gas
Refrigerating machines, 2.2 UN2857 ..... 2.2 A53 306, 307 306 306, 307 450 kg 450 kg A
containing non-flammable, non-
toxic gases, or ammonia
solutions (UN2672)
[[Page 283]]
Regulated medical waste, n.o.s. 6.2 UN3291 II 6.2 41, A13, 337 134 197 197 No limit No limit B 40
or Clinical waste,
unspecified, n.o.s. or (BIO)
Medical waste, n.o.s., or
Biomedical waste, n.o.s. or
Medical waste, n.o.s
Release devices, explosive 1.4S UN0173 ..... 1.4S ....................... None 62 62 25 kg 100 kg 01 25
Resin Solution, flammable 3 UN1866 I 3 B52, T11, TP1, TP8, 150 201 243 1 L 30 L E
TP28
II 3 149, 383, B52, IB2, T4, 150 173 242 5 L 60 L B
TP1, TP8
III 3 B1, B52, IB3, T2, TP1 150 173 242 60 L 220 L A
Resorcinol 6.1 UN2876 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Rifle grenade, see Grenades,
hand or rifle, etc
Rifle powder, see Powder,
smokeless (UN 0160)
Rivets, explosive 1.4S UN0174 ..... 1.4S ....................... None 62 62 25 kg 100 kg 01 25
Road asphalt or tar liquid, see
Tars, liquid, etc
Rocket motors 1.3C UN0186 ..... 1.3C 109 None 62 62 Forbidden 220 kg 04 25
Rocket motors 1.1C UN0280 ..... 1.1C 109 None 62 62 Forbidden Forbidden 04 25
Rocket motors 1.2C UN0281 ..... 1.2C 109 None 62 62 Forbidden Forbidden 04 25
Rocket motors 1.4C UN0510 ..... 1.4C 109 None 62 62 Forbidden 75 kg 02 25
Rocket motors, liquid fueled 1.2J UN0395 ..... 1.2J 109 None 62 None Forbidden Forbidden 05 25, 23E
Rocket motors, liquid fueled 1.3J UN0396 ..... 1.3J 109 None 62 None Forbidden Forbidden 05 25, 23E
Rocket motors with hypergolic 1.3L UN0250 ..... 1.3L 109 None 62 None Forbidden Forbidden 05 25,
liquids with or without an 14E,
expelling charge 15E
Rocket motors with hypergolic 1.2L UN0322 ..... 1.2L 109 None 62 None Forbidden Forbidden 05 25,
liquids with or without an 14E,
expelling charge 15E
Rockets, line-throwing 1.2G UN0238 ..... 1.2G ....................... None 62 None Forbidden Forbidden 03 25
Rockets, line-throwing 1.3G UN0240 ..... 1.3G ....................... None 62 None Forbidden 75 kg 03 25
Rockets, line-throwing 1.4G UN0453 ..... 1.4G ....................... None 62 None Forbidden 75 kg 02 25
Rockets, liquid fueled with 1.1J UN0397 ..... 1.1J ....................... None 62 None Forbidden Forbidden 05 25, 23E
bursting charge
Rockets, liquid fueled with 1.2J UN0398 ..... 1.2J ....................... None 62 None Forbidden Forbidden 05 25, 23E
bursting charge
Rockets, with bursting charge 1.1F UN0180 ..... 1.1F ....................... None 62 None Forbidden Forbidden 05 25
Rockets, with bursting charge 1.1E UN0181 ..... 1.1E ....................... None 62 62 Forbidden Forbidden 04 25
Rockets, with bursting charge 1.2E UN0182 ..... 1.2E ....................... None 62 62 Forbidden Forbidden 04 25
Rockets, with bursting charge 1.2F UN0295 ..... 1.2F ....................... None 62 None Forbidden Forbidden 05 25
Rockets, with expelling charge 1.2C UN0436 ..... 1.2C ....................... None 62 62 Forbidden Forbidden 04 25
Rockets, with expelling charge 1.3C UN0437 ..... 1.3C ....................... None 62 62 Forbidden Forbidden 04 25
Rockets, with expelling charge 1.4C UN0438 ..... 1.4C ....................... None 62 62 Forbidden 75 kg 02 25
Rockets, with inert head 1.3C UN0183 ..... 1.3C ....................... None 62 62 Forbidden Forbidden 04 25
Rockets, with inert head 1.2C UN0502 ..... 1.2C ....................... None 62 62 Forbidden Forbidden 02 25, 5E
Rosin oil 3 UN1286 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
[[Page 284]]
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Rubber solution 3 UN1287 II 3 149, IB2, T4, TP1, TP8 150 202 242 5 L 60 L B
III B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Rubber scrap or shoddy, 4.1 UN1345 II 4.1 IB8, IP2, IP4, T3, TP33 151 212 240 15 kg 50 kg A
powdered or granulated, not
exceeding 840 microns and
rubber contend exceeding 45%
Rubidium 4.3 UN1423 I 4.3 22, A7, A19, IB4, IP1, None 211 242 Forbidden 15 kg D 13, 52,
N34, N40, N45, W32 148
Rubidium hydroxide 8 UN2678 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A 29, 52.
Rubidium hydroxide solution 8 UN2677 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L A 29, 52.
III 8 IB3, T4, TP1 154 203 241 5 L 60 L A 29, 52.
Safety devices, electrically 9 UN3268 ..... 9 160, A200 166 166 166 25 kg 100 kg A
initiated
Safety devices, pyrotechnic 1.4G UN0503 ..... 1.4G A200 None 62 None Forbidden 75 kg 02 25
Safety fuse, see Fuse, safety
G Samples, explosive, other than UN0190 ..... ........ 113 None 62 None Forbidden Forbidden 05 25
initiating explosives
Sand acid, see Fluorosilicic
acid
Seed cake, containing vegetable 4.2 UN1386 III None IB8, IP3, IP7, N7 None 213 241 Forbidden Forbidden A 13, 25
oil solvent extractions and
expelled seeds, with not more
than 10 percent of oil and
when the amount of moisture is
higher than 11 percent, with
not more than 20 percent of
oil and moisture combined
I Seed cake with more than 1.5 4.2 UN1386 III None IB8, IP3, IP7, N7 None 213 241 Forbidden Forbidden E 13, 25
percent oil and not more than
11 percent moisture
I Seed cake with not more than 4.2 UN2217 III None IB8, IP3, IP7, N7 None 213 241 Forbidden Forbidden A 13, 25,
1.5 percent oil and not more 120
than 11 percent moisture
G Selenates or Selenites 6.1 UN2630 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg E
Selenic acid 8 UN1905 I 8 IB7, IP1, N34, T6, TP33 None 211 242 Forbidden 25 kg A
G Selenium compound, liquid, 6.1 UN3440 I 6.1 T14, TP2, TP27 None 201 243 1 L 30 L B
n.o.s
......... ................ II 6.1 IB2, T11, TP2, TP27 153 202 243 5 L 60 L B
......... ................ III 6.1 IB3, T7, TP1, TP28 153 203 241 60 L 220 L A
G Selenium compound, solid, n.o.s 6.1 UN3283 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg B
......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B
[[Page 285]]
......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Selenium disulfide 6.1 UN2657 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Selenium hexafluoride 2.3 UN2194 ..... 2.3, 8 1 None 302 None Forbidden Forbidden D 40
Selenium nitride Forbidden
Selenium oxychloride 8 UN2879 I 8, 6.1 A3, A6, A7, N34, T10, None 201 243 0.5 L 2.5 L E 40
TP2, TP13
Self-defense spray, aerosol,
see Aerosols, etc
+ A D Self-defense spray, non- 9 NA3334 III 9 A37 155 203 None No limit No limit A
pressurized
G Self-heating liquid, corrosive, 4.2 UN3188 II 4.2, 8 IB2, W31 None 202 243 1 L 5 L C
inorganic, n.o.s
......... III 4.2, 8 IB2, W31 None 203 241 5 L 60 L C
G Self-heating liquid, corrosive, 4.2 UN3185 II 4.2, 8 IB2, W31 None 202 243 1 L 5 L C
organic, n.o.s
......... III 4.2, 8 IB2, W31 None 203 241 5 L 60 L C
G Self-heating liquid, inorganic, 4.2 UN3186 II 4.2 IB2, W31 None 202 242 1 L 5 L C
n.o.s
......... III 4.2 IB2, W31 None 203 241 5 L 60 L C
G Self-heating liquid, organic, 4.2 UN3183 II 4.2 IB2, W31 None 202 242 1 L 5 L C
n.o.s
......... III 4.2 IB2, W31 None 203 241 5 L 60 L C
G Self-heating liquid, toxic, 4.2 UN3187 II 4.2, 6.1 IB2, W31 None 202 243 1 L 5 L C
inorganic, n.o.s
......... III 4.2, 6.1 IB2, W31 None 203 241 5 L 60 L C
G Self-heating liquid, toxic, 4.2 UN3184 II 4.2, 6.1 IB2, W31 None 202 243 1 L 5 L C
organic, n.o.s
......... III 4.2, 6.1 IB2, W31 None 203 241 5 L 60 L C
G Self-heating solid, corrosive, 4.2 UN3192 II 4.2, 8 IB5, IP2, T3, TP33 None 212 242 15 kg 50 kg C
inorganic, n.o.s.
............................... ......... ................ III 4.2, 8 IB8, IP3, T1, TP33 None 213 242 25 kg 100 kg C
G Self-heating solid, corrosive, 4.2 UN3126 II 4.2, 8 IB5, IP2, T3, TP33 None 212 242 15 kg 50 kg C
organic, n.o.s
III 4.2, 8 IB8, IP3, T1, TP33 None 213 242 25 kg 100 kg C .......
G Self-heating solid, inorganic, 4.2 UN3190 II 4.2 IB6, IP2, T3, TP33, W31 None 212 241 15 kg 50 kg C
n.o.s
......... III 4.2 IB8, IP3, T1, TP33, W31 None 213 241 25 kg 100 kg C
G Self-heating solid, organic, 4.2 UN3088 II 4.2 IB6, IP2, T3, TP33, W31 None 212 241 15 kg 50 kg C
n.o.s
......... III 4.2 B116, B130, IB8, IP3, None 213 241 25 kg 100 kg C
T1, TP33, W31
G Self-heating solid, oxidizing, 4.2 UN3127 ..... 4.2, 5.1 ....................... None 214 214 Forbidden Forbidden
n.o.s.
G Self-heating solid, toxic, 4.2 UN3191 II 4.2, 6.1 IB5, IP2, T3, TP33 None 212 242 15 kg 50 kg C
inorganic, n.o.s.
............................... ......... ................ III 4.2, 6.1 IB8, IP3, T1, TP33 None 213 242 25 kg 100 kg C
G Self-heating solid, toxic, 4.2 UN3128 II 4.2, 6.1 IB5, IP2, T3, TP33 None 212 242 15 kg 50 kg C
organic, n.o.s
III 4.2, 6.1 IB8, IP3, T1, TP33 None 213 242 25 kg 100 kg C
Self-propelled vehicle, see
Engines or Batteries etc
[[Page 286]]
G Self-reactive liquid type B 4.1 UN3221 ..... 4.1 53 151 224 None Forbidden Forbidden D 25, 52,
53, 127
G Self-reactive liquid type B, 4.1 UN3231 ..... 4.1 53 None 224 None Forbidden Forbidden D 2, 25,
temperature controlled 52, 53
G Self-reactive liquid type C 4.1 UN3223 ..... 4.1 ....................... 151 224 None 5 L 10 L D 25, 52,
53
G Self-reactive liquid type C, 4.1 UN3233 ..... 4.1 ....................... None 224 None Forbidden Forbidden D 2, 25,
temperature controlled 52, 53
G Self-reactive liquid type D 4.1 UN3225 ..... 4.1 ....................... 151 224 None 5 L 10 L D 25, 52,
53
G Self-reactive liquid type D, 4.1 UN3235 ..... 4.1 ....................... None 224 None Forbidden Forbidden D 2, 25,
temperature controlled 52, 53
G Self-reactive liquid type E 4.1 UN3227 ..... 4.1 ....................... 151 224 None 10 L 25 L D 25, 52,
53
G Self-reactive liquid type E, 4.1 UN3237 ..... 4.1 ....................... None 224 None Forbidden Forbidden D 2, 25,
temperature controlled 52, 53
G Self-reactive liquid type F 4.1 UN3229 ..... 4.1 ....................... 151 224 None 10 L 25 L D 25, 52,
53
G Self-reactive liquid type F, 4.1 UN3239 ..... 4.1 ....................... None 224 None Forbidden Forbidden D 2, 25,
temperature controlled 52, 53
G Self-reactive solid type B 4.1 UN3222 ..... 4.1 53 151 224 None Forbidden Forbidden D 25, 52,
53, 127
G Self-reactive solid type B, 4.1 UN3232 ..... 4.1 53 None 224 None Forbidden Forbidden D 2, 25,
temperature controlled 52, 53
G Self-reactive solid type C 4.1 UN3224 ..... 4.1 ....................... 151 224 None 5 kg 10 kg D 25, 52,
53
G Self-reactive solid type C, 4.1 UN3234 ..... 4.1 ....................... None 224 None Forbidden Forbidden D 2, 25,
temperature controlled 52, 53
G Self-reactive solid type D 4.1 UN3226 ..... 4.1 ....................... 151 224 None 5 kg 10 kg D 25, 52,
53
G Self-reactive solid type D, 4.1 UN3236 ..... 4.1 ....................... None 224 None Forbidden Forbidden D 2, 25,
temperature controlled 52, 53
G Self-reactive solid type E 4.1 UN3228 ..... 4.1 ....................... 151 224 None 10 kg 25 kg D 25, 52,
53
G Self-reactive solid type E, 4.1 UN3238 ..... 4.1 ....................... None 224 None Forbidden Forbidden D 2, 25,
temperature controlled 52, 53
G Self-reactive solid type F 4.1 UN3230 ..... 4.1 ....................... 151 224 None 10 kg 25 kg D 25, 52,
53
[[Page 287]]
G Self-reactive solid type F, 4.1 UN3240 ..... 4.1 ....................... None 224 None Forbidden Forbidden D 2, 25,
temperature controlled 52, 53
Shale oil 3 UN1288 I 3 T11, TP1, TP8, TP27 None 201 243 1 L 30 L B
............................... ......... ................ II 3 IB2, T4, TP1, TP8 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Shaped charges, see Charges,
shaped, etc
Signal devices, hand 1.4G UN0191 ..... 1.4G 381 None 62 None Forbidden 75 kg 02 25
Signal devices, hand 1.4S UN0373 ..... 1.4S 381 None 62 None 25 kg 100 kg 01 25
Signals, distress, ship 1.1G UN0194 ..... 1.1G ....................... None 62 None Forbidden Forbidden 03 25
Signals, distress, ship 1.3G UN0195 ..... 1.3G ....................... None 62 None Forbidden 75 kg 03 25
Signals, distress, ship 1.4G UN0505 ..... 1.4G ....................... None 62 None Forbidden 75 kg 02 25
Signals, distress, ship 1.4S UN0506 ..... 1.4S ....................... None 62 None 25 kg 100 kg 01 25
Signals, highway, see Signal
devices, hand
Signals, railway track, 1.1G UN0192 ..... 1.1G ....................... None 62 None Forbidden Forbidden 03 25
explosive
Signals, railway track, 1.4S UN0193 ..... 1.4S 381 None 62 None 25 kg 100 kg 01 25
explosive
Signals, railway track, 1.3G UN0492 ..... 1.3G ....................... None 62 None Forbidden Forbidden 03 25
explosive
Signals, railway track, 1.4G UN0493 ..... 1.4G ....................... None 62 None Forbidden 75 kg 02 25
explosive
Signals, ship distress, water-
activated, see Contrivances,
water-activated, etc
Signals, smoke 1.1G UN0196 ..... 1.1G ....................... None 62 None Forbidden Forbidden 03 25
Signals, smoke 1.4G UN0197 ..... 1.4G ....................... None 62 None Forbidden 75 kg 02 25
Signals, smoke 1.2G UN0313 ..... 1.2G ....................... None 62 None Forbidden Forbidden 03 25
Signals, smoke 1.3G UN0487 ..... 1.3G ....................... None 62 None Forbidden Forbidden 03 25
Signals, smoke 1.4S UN0507 ..... 1.4S ....................... None 62 None 25 kg 100 kg 01 25
Silane 2.1 UN2203 ..... 2.1 ....................... None 302 None Forbidden Forbidden E 40, 57,
104
Silicofluoric acid, see
Fluorosilicic acid
Silicon chloride, see Silicon
tetrachloride
Silicon powder, amorphous 4.1 UN1346 III 4.1 A1, IB8, IP3, T1, TP33 None 213 240 25 kg 100 kg A 74
Silicon tetrachloride 8 UN1818 II 8 A3, A6, B2, B6, T10, None 202 242 Forbidden 30 L C 40
TP2, TP7, TP13
Silicon tetrafluoride 2.3 UN1859 ..... 2.3, 8 2 None 302 None Forbidden Forbidden D 40
Silicon tetrafluoride, adsorbed 2.3 UN3521 ..... 2.3, 8 2 None 302c None Forbidden Forbidden D 40
Silver acetylide (dry) Forbidden
Silver arsenite 6.1 UN1683 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Silver azide (dry) Forbidden
Silver chlorite (dry) Forbidden
Silver cyanide 6.1 UN1684 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40, 52
Silver fulminate (dry) Forbidden
Silver nitrate 5.1 UN1493 II 5.1 IB8, IP2, IP4, T3, TP33 152 212 242 5 kg 25 kg A
Silver oxalate (dry) Forbidden
Silver picrate (dry) Forbidden
Silver picrate, wetted with not 4.1 UN1347 I 4.1 23, W31 None 211 None Forbidden Forbidden D 28, 36
less than 30 percent water, by
mass
[[Page 288]]
Sludge, acid 8 UN1906 II 8 A3, A7, B2, IB2, N34, None 202 242 Forbidden 30 L C 14
T8, TP2, TP28
D Smokeless powder for small arms 4.1 NA3178 I 4.1 16 None 171 None Forbidden 7.3 kg A
(100 pounds or less)
Soda lime with more than 4 8 UN1907 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A 52.
percent sodium hydroxide
Sodium 4.3 UN1428 I 4.3 A7, A8, A19, A20, B9, 151 211 244 Forbidden 15 kg D 13, 52,
B48, B68, IB4, IP1, 148
N34, T9, TP7, TP33,
TP46, W32
A Sodium aluminate, solid 8 UN2812 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
Sodium aluminate, solution 8 UN1819 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L A 52.
III 8 IB3, T4, TP1 154 203 241 5 L 60 L A 52.
Sodium aluminum hydride 4.3 UN2835 II 4.3 A8, A19, A20, IB4, T3, 151 212 242 Forbidden 50 kg E 13, 52,
TP33, W31, W40 148
Sodium ammonium vanadate 6.1 UN2863 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Sodium arsanilate 6.1 UN2473 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Sodium arsenate 6.1 UN1685 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Sodium arsenite, aqueous 6.1 UN1686 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
solutions
............................... ......... ................ III 6.1 IB3, T4, TP2 153 203 241 60 L 220 L A
Sodium arsenite, solid 6.1 UN2027 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Sodium azide 6.1 UN1687 II 6.1 IB8, IP2, IP4 153 212 242 25 kg 100 kg A 36, 52,
91
Sodium bifluoride, see Sodium
hydrogendifluoride
Sodium bisulfite, solution, see
Bisulfites, aqueous solutions,
n.o.s.
Sodium borohydride 4.3 UN1426 I 4.3 N40, W32 None 211 242 Forbidden 15 kg E 13, 52,
148
Sodium borohydride and sodium 8 UN3320 II 8 B2, IB2, N34, T7, TP2 154 202 242 1 L 30 L A 52
hydroxide solution, with not
more than 12 percent sodium
borohydride and not more than
40 percent sodium hydroxide by
mass
............................... ......... ................ III 8 B2, IB3, N34, T4, TP2 154 203 241 5 L 60 L A 52
Sodium bromate 5.1 UN1494 II 5.1 IB8, IP2, IP4, T3, TP33 152 212 242 5 kg 25 kg A 56, 58
[[Page 289]]
Sodium cacodylate 6.1 UN1688 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 52
Sodium carbonate peroxyhydrate 5.1 UN3378 II 5.1 B120, IB8, IP2, IP4, 152 212 240 5 kg 25 kg A 13, 25,
T3, TP33 75
............................... ................ III 5.1 B120, IB8, IP3, T1, 152 213 240 25 kg 100 kg A 13, 25,
TP33 75
Sodium chlorate 5.1 UN1495 II 5.1 A9, IB8, IP2, IP4, N34, 152 212 240 5 kg 25 kg A 56, 58
T3, TP33
Sodium chlorate, aqueous 5.1 UN2428 II 5.1 A2, IB2, T4, TP1 152 202 241 1 L 5 L B 56, 58,
solution 133
............................... ......... ................ III 5.1 A2, IB2, T4, TP1 152 203 241 2.5 L 30 L B 56, 58,
69, 133
Sodium chlorate mixed with
dinitrotoluene, see Explosive
blasting, type C
Sodium chlorite 5.1 UN1496 II 5.1 A9, IB8, IP2, IP4, N34, None 212 242 5 kg 25 kg A 56, 58
T3, TP33
Sodium chloroacetate 6.1 UN2659 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Sodium cuprocyanide, solid 6.1 UN2316 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 52
Sodium cuprocyanide, solution 6.1 UN2317 I 6.1 T14, TP2, TP13 None 201 243 1 L 30 L B 40, 52
Sodium cyanide, solid 6.1 UN1689 I 6.1 B69, B77, IB7, N74, None 211 242 5 kg 50 kg B 52
N75, T6, TP33, W31
Sodium cyanide solution 6.1 UN3414 I 6.1 B69, B77, N74, N75, None 201 243 1 L 30 L B 52
T14, TP2, TP13, W31
......... II 6.1 B69, B77, IB2, N74, 153 202 243 5 L 60 L B 52
N75, T11, TP2, TP13,
TP27, W31
......... III 6.1 B69, B77, IB3, N74, 153 203 241 60 L 220 L A 52
N75, T7, TP2, TP13,
TP28, W31
Sodium dichloroisocyanurate or
Sodium dichloro-s-
triazinetrione, see
Dichloroisocyanuric acid etc
Sodium dinitro-o-cresolate, dry 1.3C UN0234 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25, 5E
or wetted with less than 15
percent water, by mass
Sodium dinitro-o-cresolate, 4.1 UN3369 I 4.1 162, A8, A19, N41, N84, None 211 None 0.5 kg 0.5 kg E 28, 36
wetted with not less than 10% W31
water, by mass
Sodium dinitro-o-cresolate, 4.1 UN1348 I 4.1, 6.1 23, A8, A19, A20, N41, None 211 None 1 kg 15 kg E 28, 36
wetted with not less than 15 W31
percent water, by mass
Sodium dithionite or Sodium 4.2 UN1384 II 4.2 A19, A20, IB6, IP2, T3, None 212 241 15 kg 50 kg E 13
hydrosulfite TP33, W31
Sodium fluoride, solid 6.1 UN1690 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 52
Sodium fluoride solution 6.1 UN3415 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A 52
Sodium fluoroacetate 6.1 UN2629 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg E
Sodium fluorosilicate 6.1 UN2674 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 52
Sodium hydrate, see Sodium
hydroxide, solid
[[Page 290]]
Sodium hydride 4.3 UN1427 I 4.3 A19, N40, W32 None 211 242 Forbidden 15 kg E 13, 52,
148
Sodium hydrogendifluoride 8 UN2439 II 8 IB8, IP2, IP4, N3, N34, 154 212 240 15 kg 50 kg A 12, 25,
T3, TP33 40, 52
Sodium hydrosulfide, with less 4.2 UN2318 II 4.2 A7, A19, A20, IB6, IP2, None 212 241 15 kg 50 kg A 52
than 25 percent water of T3, TP33, W31
crystallization
Sodium hydrosulfide with not 8 UN2949 II 8 A7, IB8, IP2, IP4, T7, 154 212 240 15 kg 50 kg A 52
less than 25 percent water of TP2
crystallization
Sodium hydrosulfite, see Sodium
dithionite
Sodium hydroxide, solid 8 UN1823 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A 52.
Sodium hydroxide solution 8 UN1824 II 8 B2, IB2, N34, T7, TP2 154 202 242 1 L 30 L A 52.
III 8 IB3, N34, T4, TP1 154 203 241 5 L 60 L A 52.
Sodium hypochlorite, solution,
see Hypochlorite solutions etc
Sodium metal, liquid alloy, see
Alkali metal alloys, liquid,
n.o.s.
Sodium methylate 4.2 UN1431 II 4.2, 8 A7, A19, IB5, IP2, T3, None 212 242 15 kg 50 kg B
TP33, W31
Sodium methylate solutions in 3 UN1289 II 3, 8 IB2, T7, TP1, TP8 150 202 243 1 L 5 L B
alcohol
............................... ......... ................ III 3, 8 B1, IB3, T4, TP1 150 203 242 5 L 60 L A
Sodium monoxide 8 UN1825 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A 52.
Sodium nitrate 5.1 UN1498 III 5.1 A1, A29, B120, IB8, 152 213 240 25 kg 100 kg A
IP3, T1, TP33, W1
Sodium nitrate and potassium 5.1 UN1499 III 5.1 A1, A29, B120, IB8, 152 213 240 25 kg 100 kg A
nitrate mixtures IP3, T1, TP33, W1
Sodium nitrite 5.1 UN1500 III 5.1, 6.1 A1, A29, IB8, IP3, T1, 152 213 240 25 kg 100 kg A 56, 58
TP33
Sodium pentachlorophenate 6.1 UN2567 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Sodium perborate monohydrate 5.1 UN3377 III 5.1 B120, IB8, IP3, T1, 152 213 240 25 kg 100 kg A 13, 25,
TP33 75
Sodium perchlorate 5.1 UN1502 II 5.1 IB6, IP2, T3, TP33 152 212 242 5 kg 25 kg A 56, 58
Sodium permanganate 5.1 UN1503 II 5.1 IB6, IP2, T3, TP33 152 212 242 5 kg 25 kg D 56, 58,
138
[[Page 291]]
Sodium peroxide 5.1 UN1504 I 5.1 A20, IB5, IP1, N34 None 211 None Forbidden 15 kg C 13, 52,
66, 75,
148
Sodium peroxoborate, anhydrous 5.1 UN3247 II 5.1 IB8, IP2, IP4, T3, TP33 152 212 240 5 kg 25 kg A 13, 25
Sodium persulfate 5.1 UN1505 III 5.1 A1, IB8, IP3, T1, TP33 152 213 240 25 kg 100 kg A 58, 145
Sodium phosphide 4.3 UN1432 I 4.3, 6.1 A19, N40, W32 None 211 None Forbidden 15 kg E 13, 40,
52, 85,
148
Sodium picramate, dry or wetted 1.3C UN0235 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25, 5E
with less than 20 percent
water, by mass
Sodium picramate, wetted with 4.1 UN1349 I 4.1 23, A8, A19, N41, W31 None 211 None Forbidden 15 kg E 28, 36
not less than 20 percent
water, by mass
Sodium picryl peroxide Forbidden
Sodium potassium alloys, see
Potassium sodium alloys
Sodium selenate, see Selenates
or Selenites
Sodium sulfide, anhydrous or 4.2 UN1385 II 4.2 A19, A20, IB6, IP2, None 212 241 15 kg 50 kg A 52
Sodium sulfide with less than N34, T3, TP33, W31, W40
30 percent water of
crystallization
Sodium sulfide, hydrated with 8 UN1849 II 8 IB8, IP2, IP4, T3, TP33 154 212 240 15 kg 50 kg A 52.
not less than 30 percent water
Sodium superoxide 5.1 UN2547 I 5.1 A20, IB6, IP1, N34 None 211 None Forbidden 15 kg D 13, 52,
66, 75,
148
Sodium tetranitride Forbidden
G Solids containing corrosive 8 UN3244 II 8 49, IB5, T3, TP33 154 212 240 15 kg 50 kg B 40
liquid, n.o.s.
G Solids containing flammable 4.1 UN3175 II 4.1 47, IB6, IP2, T3, TP33 151 212 240 15 kg 50 kg B
liquid, n.o.s.
G Solids containing toxic liquid, 6.1 UN3243 II 6.1 48, IB2, T2, TP33 153 212 240 25 kg 100 kg B 40
n.o.s.
Sounding devices, explosive 1.2F UN0204 ..... 1.2F ....................... None 62 62 Forbidden Forbidden 05 25
Sounding devices, explosive 1.1F UN0296 ..... 1.1F ....................... None 62 62 Forbidden Forbidden 05 25
Sounding devices, explosive 1.1D UN0374 ..... 1.1D ....................... None 62 62 Forbidden Forbidden 04 25
Sounding devices, explosive 1.2D UN0375 ..... 1.2D ....................... None 62 62 Forbidden Forbidden 04 25
Spirits of salt, see
Hydrochloric acid
Squibs, see Igniters etc
Stannic chloride, anhydrous 8 UN1827 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L C
Stannic chloride pentahydrate 8 UN2440 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
Stannic phosphide 4.3 UN1433 I 4.3, 6.1 A19, N40, W32 None 211 242 Forbidden 15 kg E 13, 40,
52, 85,
148
Steel swarf, see Ferrous metal
borings, etc
Stibine 2.3 UN2676 ..... 2.3, 2.1 1 None 304 None Forbidden Forbidden D 40
Storage batteries, wet, see
Batteries, wet etc
[[Page 292]]
Strontium arsenite 6.1 UN1691 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Strontium chlorate 5.1 UN1506 II 5.1 A1, A9, IB8, IP2, IP4, 152 212 242 5 kg 25 kg A 56, 58
N34, T3, TP33
Strontium nitrate 5.1 UN1507 III 5.1 A1, A29, IB8, IP3, T1, 152 213 240 25 kg 100 kg A
TP33
Strontium perchlorate 5.1 UN1508 II 5.1 IB6, IP2, T3, TP33 152 212 242 5 kg 25 kg A 56, 58
Strontium peroxide 5.1 UN1509 II 5.1 IB6, IP2, T3, TP33, 152 212 242 5 kg 25 kg C 13, 52,
W100 66, 75,
148
Strontium phosphide 4.3 UN2013 I 4.3, 6.1 A19, N40, W32 None 211 None Forbidden 15 kg E 13, 40,
52, 85,
148
Strychnine or Strychnine salts 6.1 UN1692 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 40
Styphnic acid, see
Trinitroresorcinol, etc
Styrene monomer, stabilized 3 UN2055 III 3 387, B1, IB3, T2, TP1 150 203 242 60 L 220 L C 25
G Substances, explosive, n.o.s. 1.1L UN0357 ..... 1.1L 101 None 62 None Forbidden Forbidden 05 25,
14E,
15E
G Substances, explosive, n.o.s. 1.2L UN0358 ..... 1.2L 101 None 62 None Forbidden Forbidden 05 25,
14E,
15E
G Substances, explosive, n.o.s. 1.3L UN0359 ..... 1.3L 101 None 62 None Forbidden Forbidden 05 25,
14E,
15E
G Substances, explosive, n.o.s. 1.1A UN0473 ..... 1.1A 101, 111 None 62 None Forbidden Forbidden 05 25
G Substances, explosive, n.o.s. 1.1C UN0474 ..... 1.1C 101 None 62 None Forbidden Forbidden 04 25
G Substances, explosive, n.o.s. 1.1D UN0475 ..... 1.1D 101 None 62 None Forbidden Forbidden 04 25
G Substances, explosive, n.o.s. 1.1G UN0476 ..... 1.1G 101 None 62 None Forbidden Forbidden 03 25
G Substances, explosive, n.o.s. 1.3C UN0477 ..... 1.3C 101 None 62 None Forbidden Forbidden 04 25
G Substances, explosive, n.o.s. 1.3G UN0478 ..... 1.3G 101 None 62 None Forbidden Forbidden 03 25
G Substances, explosive, n.o.s. 1.4C UN0479 ..... 1.4C 101 None 62 None Forbidden 75 kg 02 25
G Substances, explosive, n.o.s. 1.4D UN0480 ..... 1.4D 101 None 62 None Forbidden 75 kg 02 25
G Substances, explosive, n.o.s. 1.4S UN0481 ..... 1.4S 101 None 62 None 25 kg 75 kg 01 25
G Substances, explosive, n.o.s. 1.4G UN0485 ..... 1.4G 101 None 62 None Forbidden 75 kg 02 25
G Substances, explosive, very 1.5D UN0482 ..... 1.5D 101 None 62 None Forbidden Forbidden 03 25
insensitive, n.o.s. or
Substances, EVI, n.o.s.
[[Page 293]]
Substituted nitrophenol 3 UN2780 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L B 40
pesticides, liquid, flammable,
toxic, flash point less than
23 degrees C
............................... ................ II 3, 6.1 IB2, T11, TP2, TP13, 150 202 243 1 L 60 L B 40
TP27
Substituted nitrophenol 6.1 UN3014 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
pesticides, liquid, toxic
............................... ......... ................ II 6.1 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1 IB3, T7, TP2, TP28 153 203 241 60 L 220 L A 40
Substituted nitrophenol 6.1 UN3013 I 6.1, 3 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
pesticides, liquid, toxic,
flammable, flash point not
less than 23 degrees C
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1, 3 B1, IB3, T7, TP2, TP28 153 203 242 60 L 220 L A 40
Substituted nitrophenol 6.1 UN2779 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 40
pesticides, solid, toxic
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
Sucrose octanitrate (dry) Forbidden
Sulfamic acid 8 UN2967 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
D Sulfur 9 NA1350 III 9 30, B120, IB8, IP2 None None 240 No Limit No Limit A 25, 74
I Sulfur 4.1 UN1350 III 4.1 30, B120, IB8, IP3, T1, None None 240 25 kg 100 kg A 25, 74
TP33
Sulfur and chlorate, loose Forbidden
mixtures of
Sulfur chlorides 8 UN1828 I 8 5, A3, A7, A10, B10, None 201 243 Forbidden 2.5 L C 40
B77, N34, T20, TP2
Sulfur dichloride, see Sulfur
chlorides
Sulfur dioxide 2.3 UN1079 ..... 2.3, 8 3, B14, T50, TP19 None 304 314, 315 Forbidden Forbidden D 40
Sulfur dioxide solution, see
Sulfurous acid
Sulfur hexafluoride 2.2 UN1080 ..... 2.2 ....................... 306 304 314, 315 75 kg 150 kg A
D Sulfur, molten 9 NA2448 III 9 30,B13, IB3, R1, T1, None 213 247 Forbidden Forbidden C 61
TP3
I Sulfur, molten 4.1 UN2448 III 4.1 30, B13, IB1, R1, T1, None 213 247 Forbidden Forbidden C 74
TP3
Sulfur tetrafluoride 2.3 UN2418 ..... 2.3, 8 1 None 302 245 Forbidden Forbidden D 40, 52
+ Sulfur trioxide, stabilized 8 UN1829 I 8, 6.1 2, 387, B9, B14, B32, None 227 244 Forbidden Forbidden A 25, 40
B49, B77, N34, T20,
TP4, TP13, TP25, TP26,
TP38, TP45
Sulfuretted hydrogen, see
Hydrogen sulfide
Sulfuric acid, fuming with less 8 UN1831 I 8 A3, A7, N34, T20, None 201 243 Forbidden 2.5 L C 14, 40
than 30 percent free sulfur TP2,TP13
trioxide
[[Page 294]]
Sulfuric acid, fuming with 30 8 UN1831 I 8, 6.1 2, B9, B14, B32, B77, None 227 244 Forbidden Forbidden C
percent or more free sulfur B84, N34, T20, TP2,
trioxide TP12, TP13
Sulfuric acid, spent 8 UN1832 II 8 A3, A7, B2, B83, B84, None 202 242 Forbidden 30 L C 14
IB2, N34, T8, TP2
Sulfuric acid with more than 51 8 UN1830 II 8 A3, A7, B3, B83, B84, 154 202 242 1 L 30 L C 14
percent acid IB2, N34, T8, TP2
Sulfuric acid with not more 8 UN2796 II 8 386, A3, A7, B2, B15, 154 202 242 1 L 30 L B
than 51% acid IB2, N6, N34, T8, TP2
Sulfuric and hydrofluoric acid
mixtures, see Hydrofluoric and
sulfuric acid mixtures
Sulfuric anhydride, see Sulfur
trioxide, stabilized
Sulfurous acid 8 UN1833 II 8 B3, IB2, T7, TP2 154 202 242 1 L 30 L B 40
+ Sulfuryl chloride 6.1 UN1834 I 6.1, 8 1, B6, B9, B10, B14, None 226 244 Forbidden Forbidden D 40
B30, B77, N34, T22,
TP2, TP13, TP38, TP44
Sulfuryl fluoride 2.3 UN2191 ..... 2.3 4 None 304 314, 315 Forbidden Forbidden D 40
Tars, liquid including road 3 UN1999 II 3 149, B13, IB2, T3, TP3, 150 202 242 5 L 60 L B
oils and cutback bitumens TP29
......... ................ III 3 B1, B13, IB3, T1, TP3 150 203 242 60 L 220 L A
Tear gas candles 6.1 UN1700 ..... 6.1, 4.1 ....................... None 340 None Forbidden 50 kg D 40
Tear gas cartridges, see
Ammunition, tear-producing,
etc
D Tear gas devices with more than 6.1 NA1693 I 6.1 ....................... None 340 None Forbidden Forbidden D 40
2 percent tear gas substances,
by mass
............................... ......... ................ II 6.1 ....................... None 340 None Forbidden Forbidden D 40
Tear gas devices, with not more
than 2 percent tear gas
substances, by mass, see
Aerosols, etc
Tear gas grenades, see Tear gas
candles
G Tear gas substances, liquid, 6.1 UN1693 I 6.1 W31 None 201 None Forbidden Forbidden D 40
n.o.s
[[Page 295]]
......... II 6.1 IB2, W31 None 202 None Forbidden 5 L D 40
G Tear gas substance, solid, 6.1 UN3448 I 6.1 T6, TP33, W31 None 211 242 Forbidden Forbidden D 40
n.o.s
......... II 6.1 IB8, IP2, IP4, T3, None 212 242 Forbidden 25 kg D 40
TP33, W31
G Tellurium compound, n.o.s 6.1 UN3284 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg B
II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B
III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
Tellurium hexafluoride 2.3 UN2195 ..... 2.3, 8 1 None 302 None Forbidden Forbidden D 40
Terpene hydrocarbons, n.o.s. 3 UN2319 III 3 B1, IB3, T4, TP1, TP29 150 203 242 60 L 220 L A
Terpinolene 3 UN2541 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Tetraazido benzene quinone Forbidden
Tetrabromoethane 6.1 UN2504 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
1,1,2,2-Tetrachloroethane 6.1 UN1702 II 6.1 IB2, N36, T7, TP2 153 202 243 5 L 60 L A 40
Tetrachloroethylene 6.1 UN1897 III 6.1 IB3, N36, T4, TP1 153 203 241 60 L 220 L A 40
Tetraethyl dithiopyrophosphate 6.1 UN1704 II 6.1 IB2, T7, TP2 153 212 242 25 kg 100 kg D 40
Tetraethyl silicate 3 UN1292 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Tetraethylammonium perchlorate Forbidden
(dry)
Tetraethylenepentamine 8 UN2320 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A 52.
1,1,1,2-Tetrafluoroethane or 2.2 UN3159 ..... 2.2 T50 306 304 314, 315 75 kg 150 kg A
Refrigerant gas R 134a
Tetrafluoroethylene, stabilized 2.1 UN1081 ..... 2.1 387 306 304 None Forbidden 150 kg E 25, 40
Tetrafluoromethane or 2.2 UN1982 ..... 2.2 ....................... None 302 None 75 kg 150 kg A
Refrigerant gas R 14
1,2,3,6-Tetrahydrobenzaldehyde 3 UN2498 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Tetrahydrofuran 3 UN2056 II 3 IB2, T4, TP1 None 202 242 5 L 60 L B
Tetrahydrofurfurylamine 3 UN2943 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Tetrahydrophthalic anhydrides 8 UN2698 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
with more than 0.05 percent of
maleic anhydride
1,2,3,6-Tetrahydropyridine 3 UN2410 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Tetrahydrothiophene 3 UN2412 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Tetramethylammonium hydroxide, 8 UN3423 II 8 B2, IB8, IP2, IP4, T3, 154 213 240 15 kg 50 kg A 52
solid TP33
Tetramethylammonium hydroxide 8 UN1835 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L A 52
solution
............................... ......... ................ III 8 B2, IB3, T7, TP2 154 203 241 5 L 60 L A 52
Tetramethylene diperoxide Forbidden
dicarbamide
Tetramethylsilane 3 UN2749 I 3 A7, T14, TP2 None 201 243 Forbidden 30 L D
Tetranitro diglycerin Forbidden
Tetranitroaniline 1.1D UN0207 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
+ Tetranitromethane 6.1 UN1510 I 6.1, 5.1 2, B32, T20, TP2, TP13, None 227 None Forbidden Forbidden D 40, 6
TP38, TP44
2,3,4,6-Tetranitrophenol Forbidden
2,3,4,6-Tetranitrophenyl methyl Forbidden
nitramine
2,3,4,6- Forbidden
Tetranitrophenylnitramine
Tetranitroresorcinol (dry) Forbidden
[[Page 296]]
2,3,5,6-Tetranitroso-1,4- Forbidden
dinitrobenzene
2,3,5,6-Tetranitroso Forbidden
nitrobenzene (dry)
Tetrapropylorthotitanate 3 UN2413 III 3 B1, IB3, T4, TP1 150 203 242 60 L 220 L A
Tetrazene, see Guanyl
nitrosaminoguanyltetrazene
Tetrazine (dry) Forbidden
Tetrazol-1-acetic acid 1.4C UN0407 ..... 1.4C ....................... None 62 None Forbidden 75 kg 02 25
1H-Tetrazole 1.1D UN0504 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25, 5E
Tetrazolyl azide (dry) Forbidden
Tetryl, see
Trinitrophenylmethylnitramine
A I W Textile waste, wet 4.2 UN1857 III 4.2 ....................... 151 213 240 Forbidden Forbidden A
Thallium chlorate 5.1 UN2573 II 5.1, 6.1 IB6, IP2, T3, TP33 152 212 242 5 kg 25 kg A 56, 58
G Thallium compounds, n.o.s 6.1 UN1707 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Thallium nitrate 6.1 UN2727 II 6.1, 5.1 IB6, IP2, T3, TP33 153 212 242 5 kg 25 kg A
4-Thiapentanal 6.1 UN2785 III 6.1 IB3, T4, TP1, W31 153 203 241 60 L 220 L D 25, 49
Thioacetic acid 3 UN2436 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Thiocarbamate pesticide, 3 UN2772 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L B 40
liquid, flammable, toxic,
flash point less than 23
degrees C
............................... ......... ................ II 3, 6.1 IB2, T11, TP13, TP27 150 202 243 1 L 60 L B 40
Thiocarbamate pesticide, 6.1 UN3005 I 6.1, 3 T14, TP2, TP13 None 201 243 1 L 30 L B 40
liquid, toxic, flammable,
flash point not less than 23
degrees C
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1, 3 IB3, T7, TP2, TP28 153 203 242 60 L 220 L A 40
Thiocarbamate pesticide, 6.1 UN3006 I 6.1 T14, TP2, TP13 None 201 243 1 L 30 L B 40
liquid, toxic
............................... ......... ................ II 6.1 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1 IB3, T7, TP2, TP28 153 203 241 60 L 220 L A 40
Thiocarbamate pesticides, 6.1 UN2771 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 40
solid, toxic
[[Page 297]]
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
Thiocarbonylchloride, see
Thiophosgene
Thioglycol 6.1 UN2966 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
Thioglycolic acid 8 UN1940 II 8 A7, B2, IB2, N34, T7, 154 202 242 1 L 30 L A
TP2
Thiolactic acid 6.1 UN2936 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
Thionyl chloride 8 UN1836 I 8 B6, B10, N34, T10, TP2, None 201 243 Forbidden Forbidden C 40
TP13
Thiophene 3 UN2414 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B 40
+ Thiophosgene 6.1 UN2474 I 6.1 2, B9, B14, B32, N33, None 227 244 Forbidden Forbidden D 40, 52
N34, T20, TP2, TP13,
TP38, TP45
Thiophosphoryl chloride 8 UN1837 II 8 A3, A7, B2, B8, B25, None 202 242 Forbidden 30 L C 40
IB2, N34, T7, TP2
Thiourea dioxide 4.2 UN3341 II 4.2 IB6, IP2, T3, TP33, W31 None 212 241 15 kg 50 kg D
......... III 4.2 IB8, IP3, T1, TP33, W31 None 213 241 25 kg 100 kg D
Tin chloride, fuming, see
Stannic chloride, anhydrous
Tin perchloride or Tin
tetrachloride, see Stannic
chloride, anhydrous
Tinctures, medicinal 3 UN1293 II 3 IB2, T4, TP1, TP8 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Tinning flux, see Zinc chloride
Tires and tire assemblies, see
Air, compressed or Nitrogen,
compressed
Titanium disulphide 4.2 UN3174 III 4.2 IB8, IP3, T1, TP33, W31 None 213 241 25 kg 100 kg A
Titanium hydride 4.1 UN1871 II 4.1 A19, A20, IB4, N34, T3, None 212 241 15 kg 50 kg E
TP33, W31, W40
Titanium powder, dry 4.2 UN2546 I 4.2 W31 None 211 242 Forbidden Forbidden D 13, 148
......... II 4.2 A19, A20, IB6, IP2, N5, None 212 241 15 kg 50 kg D 13, 148
N34, T3, TP33, W31
......... III 4.2 B135, IB8, IP21, T1, None 213 241 25 kg 100 kg D 13, 148
TP33, W31
Titanium powder, wetted with 4.1 UN1352 II 4.1 A19, A20, IB6, IP2, None 212 240 15 kg 50 kg E 74
not less than 25 percent water N34, T3, TP33, W31, W40
(a visible excess of water
must be present) (a)
mechanically produced,
particle size less than 53
microns; (b) chemically
produced, particle size less
than 840 microns
Titanium sponge granules or 4.1 UN2878 III 4.1 A1, B134, IB8, IP21, None 213 240 25 kg 100 kg D 13, 74,
Titanium sponge powders T1, TP33, W100 147,
148
+ Titanium tetrachloride 6.1 UN1838 I 6.1, 8 2, B7, B9, B14, B32, None 227 244 Forbidden Forbidden D 40
B77, T20, TP2, TP13,
TP38, TP45
[[Page 298]]
Titanium trichloride mixtures 8 UN2869 II 8 A7, IB8, IP2, IP4, N34, 154 212 240 15 kg 50 kg A 40
T3, TP33
............................... ......... ................ III 8 A7, IB8, IP3, N34, T1, 154 213 240 25 kg 100 kg A 40
TP33
Titanium trichloride, 4.2 UN2441 I 4.2, 8 N34, W31 None 181 244 Forbidden Forbidden D 13, 40,
pyrophoric or Titanium 148
trichloride mixtures,
pyrophoric
TNT mixed with aluminum, see
Tritonal
TNT, see Trinitrotoluene, etc
Toluene 3 UN1294 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
+ Toluene diisocyanate 6.1 UN2078 II 6.1 IB2, T7, TP2, TP13 153 202 243 5 L 60 L D 25, 40
Toluene sulfonic acid, see
Alkyl, or Aryl sulfonic acid
etc
+ Toluidines, liquid 6.1 UN1708 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
Toluidines, solid 6.1 UN3451 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
2,4-Toluylenediamine, solid or 6.1 UN1709 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
2,4-Toluenediamine, solid
2,4-Toluylenediamine solution 6.1 UN3418 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
or 2,4-Toluenediamine solution
Torpedoes, liquid fueled, with 1.3J UN0450 ..... 1.3J ....................... ............ 62 None Forbidden Forbidden 05 25, 23E
inert head
Torpedoes, liquid fueled, with 1.1J UN0449 ..... 1.1J ....................... ............ 62 None Forbidden Forbidden 05 25, 23E
or without bursting charge
Torpedoes with bursting charge 1.1E UN0329 ..... 1.1E ....................... ............ 62 62 Forbidden Forbidden 04 25
Torpedoes with bursting charge 1.1F UN0330 ..... 1.1F ....................... ............ 62 None Forbidden Forbidden 05 25
Torpedoes with bursting charge 1.1D UN0451 ..... 1.1D ....................... ............ 62 62 Forbidden Forbidden 04 25
G Toxic by inhalation liquid, 6.1 UN3488 I 6.1, 3, 1, B9, B14, B30, T22, None 226 244 Forbidden Forbidden D 40, 125
flammable, corrosive, n.o.s. 8 TP2, TP13, TP27, TP38,
with an LC50 lower than or TP44
equal to 200 ml/m3 and
saturated vapor concentration
greater than or equal to 500
LC50
[[Page 299]]
G Toxic by inhalation liquid, 6.1 UN3489 I 6.1, 3, 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40, 125
flammable, corrosive, n.o.s. 8 TP2, TP13, TP27, TP38,
with an LC50 lower than or TP45
equal to 1000 ml/m3 and
saturated vapor concentration
greater than or equal to 10
LC50
G Toxic by inhalation liquid, 6.1 UN3381 I 6.1 1, B9, B14, B30, T22, None 226 244 Forbidden Forbidden D 40
n.o.s. with an LC50 lower than TP2, TP13, TP27, TP38,
or equal to 200 ml/m\3\ and TP44
saturated vapor concentration
greater than or equal to 500
LC50
G Toxic by inhalation liquid, 6.1 UN3382 I 6.1 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40
n.o.s. with an LC50 lower than TP2, TP13, TP27, TP38,
or equal to 1000 ml/m\3\ and TP45
saturated vapor concentration
greater than or equal to 10
LC50
G Toxic by inhalation liquid, 6.1 UN3383 I 6.1, 3 1, B9, B14, B30, T22, None 226 244 Forbidden Forbidden D 40
flammable, n.o.s. with an LC50 TP2, TP13, TP27, TP38,
lower than or equal to 200 ml/ TP44
m\3\ and saturated vapor
concentration greater than or
equal to 500 LC50
G Toxic by inhalation liquid, 6.1 UN3384 I 6.1, 3 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40
flammable, n.o.s. with an LC50 TP2, TP13, TP27, TP38,
lower than or equal to 1000 ml/ TP45
m\3\ and saturated vapor
concentration greater than or
equal to 10 LC50
G Toxic by inhalation liquid, 6.1 UN3385 I 6.1, 4.3 1, B9, B14, B30, T22, None 226 244 Forbidden Forbidden D 13, 40,
water-reactive, n.o.s. with an TP2, TP13, TP38, TP44 148
LC50 lower than or equal to
200 ml/m\3\ and saturated
vapor concentration greater
than or equal to 500 LC50
G Toxic by inhalation liquid, 6.1 UN3386 I 6.1, 4.3 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 13, 40,
water-reactive, n.o.s. with an TP2, TP13, TP38, TP44 148
LC50 lower than or equal to
1000 ml/m\3\ and saturated
vapor concentration greater
than or equal to 10 LC50
G Toxic by inhalation liquid, 6.1 UN3490 I 6.1, 1, B9, B14, B30, T22, None 226 244 Forbidden Forbidden D 13, 21,
water-reactive, flammable, 4.3, 3 TP2, TP13, TP27, TP38, 40, 49,
n.o.s. with an LC50 lower than TP44 148
or equal to 200 ml/ m3 and
saturated vapor concentration
greater than or equal to 500
LC50
G Toxic by inhalation liquid, 6.1 UN3491 I 6.1, 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 13, 21,
water-reactive, flammable, 4.3, 3 TP2, TP13, TP27, TP38, 28, 40,
n.o.s. with an LC50 lower or TP45 49, 148
equal to 1000 ml/m3 and
saturated vapor concentration
greater than or equal to 10
LC50
[[Page 300]]
G Toxic by inhalation liquid, 6.1 UN3387 I 6.1, 5.1 1, B9, B14, B30, T22, None 226 244 Forbidden Forbidden D 40
oxidizing, n.o.s. with an LC50 TP2, TP13, TP38, TP44
lower than or equal to 200 ml/
m\3\ and saturated vapor
concentration greater than or
equal to 500 LC50
G Toxic by inhalation liquid, 6.1 UN3388 I 6.1, 5.1 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40
oxidizing, n.o.s. with an LC50 TP2, TP13, TP38, TP44
lower than or equal to 1000 ml/
m\3\ and saturated vapor
concentration greater than or
equal to 10 LC50
G Toxic by inhalation liquid, 6.1 UN3389 I 6.1, 8 1, B9, B14, B30, T22, None 226 244 Forbidden Forbidden D 40
corrosive, n.o.s. with an LC50 TP2, TP13, TP27, TP38,
lower than or equal to 200 ml/ TP44
m\3\ and saturated vapor
concentration greater than or
equal to 500 LC50
G Toxic by inhalation liquid, 6.1 UN3390 I 6.1, 8 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden D 40
corrosive, n.o.s. with an LC50 TP2, TP13, TP27, TP38,
lower than or equal to 1000 ml/ TP45
m\3\ and saturated vapor
concentration greater than or
equal to 10 LC50
G Toxic liquid, corrosive, 6.1 UN3289 I 6.1, 8 T14, TP2, TP13, TP27 None 201 243 0.5 L 2.5 L A 40
inorganic, n.o.s
II 6.1, 8 IB2, T11, TP2, TP27 153 202 243 1 L 30 L A 40
G Toxic liquid, inorganic, n.o.s 6.1 UN3287 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L A 40
II 6.1 IB2, T11, TP2, TP27 153 202 243 5 L 60 L A 40
III 6.1 IB3, T7, TP1, TP28 153 203 241 60 L 220 L A 40
G Toxic liquids, corrosive, 6.1 UN2927 I 6.1, 8 T14, TP2, TP13, TP27 None 201 243 0.5 L 2.5 L B 40
organic, n.o.s.
............................... ......... ................ II 6.1, 8 IB2, T11, TP2, TP27 153 202 243 1 L 30 L B 40
G Toxic liquids, flammable, 6.1 UN2929 I 6.1, 3 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
organic, n.o.s.
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
G Toxic, liquids, organic, n.o.s. 6.1 UN2810 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
............................... ......... ................ II 6.1 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1 IB3, T7, TP1, TP28 153 203 241 60 L 220 L A 40
[[Page 301]]
G Toxic liquids, oxidizing, 6.1 UN3122 I 6.1, 5.1 A4 None 201 243 Forbidden 2.5 L C
n.o.s.
............................... ......... ................ II 6.1, 5.1 IB2 153 202 243 1 L 5 L C
G Toxic liquids, water-reactive, 6.1 UN3123 I 6.1, 4.3 A4 None 201 243 Forbidden 1 L E 13,40,
n.o.s 148
II 6.1, 4.3 IB2 None 202 243 1 L 5 L E 13, 40,
148
G Toxic solid, corrosive, 6.1 UN3290 I 6.1, 8 IB7, T6, TP33 None 211 242 1 kg 25 kg A 40
inorganic, n.o.s
II 6.1, 8 IB6, IP2, T3, TP33 153 212 242 15 kg 50 kg A 40
G Toxic solid, inorganic, n.o.s. 6.1 UN3288 I 6.1 IB7, T6, TP33 None 211 242 5 kg 50 kg A 40
II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
G Toxic solids, corrosive, 6.1 UN2928 I 6.1, 8 IB7, T6, TP33 None 211 242 1 kg 25 kg B 40
organic, n.o.s.
............................... ......... ................ II 6.1, 8 IB6, IP2, T3, TP33 153 212 242 15 kg 50 kg B 40
G Toxic solids, flammable, 6.1 UN2930 I 6.1, 4.1 IB6, T6, TP33 None 211 242 1 kg 15 kg B
organic, n.o.s.
............................... ......... ................ II 6.1, 4.1 IB8, IP2, IP4, T3, TP33 153 212 242 15 kg 50 kg B
G Toxic solids, organic, n.o.s. 6.1 UN2811 I 6.1 IB7, T6, TP33 None 211 242 5 kg 50 kg B
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A
G Toxic solids, oxidizing, n.o.s. 6.1 UN3086 I 6.1, 5.1 T6, TP33 None 211 242 1 kg 15 kg C
............................... ......... ................ II 6.1, 5.1 IB6, IP2, T3, TP33 153 212 242 15 kg 50 kg C
G Toxic solids, self-heating, 6.1 UN3124 I 6.1, 4.2 A5, T6, TP33 None 211 242 5 kg 15 kg D 40
n.o.s.
............................... ......... ................ II 6.1, 4.2 IB6, IP2, T3, TP33 None 212 242 15 kg 50 kg D 40
G Toxic solids, water-reactive, 6.1 UN3125 I 6.1, 4.3 A5, T6, TP33, W100 None 211 242 5 kg 15 kg D 13, 40,
n.o.s 148
G Toxins, extracted from living 6.1 UN3172 I 6.1 141 None 201 243 1 L 30 L B 40
sources, liquid, n.o.s.
............................... ......... ................ II 6.1 141, IB2 None 202 243 5 L 60 L B 40
............................... ......... ................ III 6.1 141, IB3 153 203 241 60 L 220 L B 40
G Toxins, extracted from living 6.1 UN3462 I 6.1 141, IB7, IP1, T6, TP33 None 211 243 5 kg 50 kg B
sources, solid, n.o.s.
II 6.1 141, IB8, IP2, IP4, T3 None 212 243 25 kg 100 kg B
TP33
III 6.1 141, IB8, IP3, T1 TP33 153 213 241 100 kg 200 kg A
D Toy Caps 1.4S NA0337 ..... 1.4S ....................... None 62 None 25 kg 100 kg 01 25
Tracers for ammunition 1.3G UN0212 ..... 1.3G ....................... None 62 None Forbidden Forbidden 03 25
Tracers for ammunition 1.4G UN0306 ..... 1.4G ....................... None 62 None Forbidden 75 kg 02 25
Tractors, see Vehicle, etc
Tri-(b-nitroxyethyl) ammonium Forbidden
nitrate
Triallyl borate 6.1 UN2609 III 6.1 IB3 153 203 241 60 L 220 L A 13
[[Page 302]]
Triallylamine 3 UN2610 III 3, 8 B1, IB3, T4, TP1 None 203 242 5 L 60 L A 40
Triazine pesticides, liquid, 3 UN2764 I 3, 6.1 T14, TP2, TP13, TP27 None 201 243 Forbidden 30 L B 40
flammable, toxic, flash point
less than 23 degrees C
............................... ......... ................ II 3, 6.1 IB2, T11, TP2, TP13, 150 202 243 1 L 60 L B 40
TP27
Triazine pesticides, liquid, 6.1 UN2998 I 6.1 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
toxic
............................... ......... ................ II 6.1 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1 IB3, T7, TP2, TP28 153 203 241 60 L 220 L A 40
Triazine pesticides, liquid, 6.1 UN2997 I 6.1, 3 T14, TP2, TP13, TP27 None 201 243 1 L 30 L B 40
toxic, flammable, flash point
not less than 23 degrees C
............................... ......... ................ II 6.1, 3 IB2, T11, TP2, TP13, 153 202 243 5 L 60 L B 40
TP27
............................... ......... ................ III 6.1, 3 IB3, T7, TP2, TP28 153 203 242 60 L 220 L A 40
Triazine pesticides, solid, 6.1 UN2763 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 40
toxic
............................... ......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A 40
............................... ......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
Tributylamine 6.1 UN2542 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
Tributylphosphane 4.2 UN3254 I 4.2 T21, TP7, TP33 None 211 242 Forbidden Forbidden D 136
Trichloro-s-triazinetrione dry,
with more than 39 percent
available chlorine, see
Trichloroisocyanuric acid, dry
Trichloroacetic acid 8 UN1839 II 8 A7, IB8, IP2, IP4, N34, 154 212 240 15 kg 50 kg A
T3, TP33
Trichloroacetic acid, solution 8 UN2564 II 8 A3, A6, A7, B2, IB2, 154 202 242 1 L 30 L B
N34, T7, TP2
............................... ......... ................ III 8 A3, A6, A7, IB3, N34, 154 203 241 5 L 60 L B 8
T4, TP1
+ Trichloroacetyl chloride 8 UN2442 II 8, 6.1 2, B9, B14, B32, N34, None 227 244 Forbidden Forbidden D 40
T20, TP2, TP38, TP45
Trichlorobenzenes, liquid 6.1 UN2321 III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Trichlorobutene 6.1 UN2322 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 25, 40
1,1,1-Trichloroethane 6.1 UN2831 III 6.1 IB3, N36, T4, TP1 153 203 241 60 L 220 L A 40
Trichloroethylene 6.1 UN1710 III 6.1 IB3, N36, T4, TP1 153 203 241 60 L 220 L A 40
Trichloroisocyanuric acid, dry 5.1 UN2468 II 5.1 IB8, IP2, IP4, T3, TP33 152 212 240 5 kg 25 kg A 13
[[Page 303]]
Trichloromethyl perchlorate Forbidden
Trichlorosilane 4.3 UN1295 I 4.3, 3, N34, T14, TP2, TP7, None 201 244 Forbidden Forbidden D 21, 40,
8 TP13, W31 49, 100
Tricresyl phosphate with more 6.1 UN2574 II 6.1 A3, IB2, N33, N34, T7, 153 202 243 5 L 60 L A
than 3 percent ortho isomer TP2
Triethyl phosphite 3 UN2323 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Triethylamine 3 UN1296 II 3, 8 IB2, T7, TP1 150 202 243 1 L 5 L B 40
Triethylenetetramine 8 UN2259 II 8 B2, IB2, T7, TP2 154 202 242 1 L 30 L B 40, 52
Trifluoroacetic acid 8 UN2699 I 8 A3, A6, A7, B4, N3, None 201 243 0.5 L 2.5 L B 12, 25,
N34, N36, T10, TP2 40
Trifluoroacetyl chloride 2.3 UN3057 ..... 2.3, 8 2, B7, B9, B14, T50, None 304 314, 315 Forbidden Forbidden D 40
TP21
Trifluorochloroethylene, 2.3 UN1082 ..... 2.3, 2.1 3, 387, B14, T50 None 304 314, 315 Forbidden Forbidden D 25, 40
stabilized or Refrigerant gas
R 1113
Trifluoromethane or Refrigerant 2.2 UN1984 ..... 2.2 ....................... 306 304 314, 315 75 kg 150 kg A
gas R 23
Trifluoromethane, refrigerated 2.2 UN3136 ..... 2.2 T75, TP5 306 None 314, 315 50 kg 500 kg D
liquid
1,1,1-Trifluoroethane or 2.1 UN2035 ..... 2.1 T50 306 304 314, 315 Forbidden 150 kg B 40
Refrigerant gas, R 143a
2-Trifluoromethylaniline 6.1 UN2942 III 6.1 IB3 153 203 241 60 L 220 L A
3-Trifluoromethylaniline 6.1 UN2948 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A 40
Triformoxime trinitrate Forbidden
Triisobutylene 3 UN2324 III 3 B1, IB3, T4, TP1 150 203 242 60 L 220 L A
Triisopropyl borate 3 UN2616 II 3 IB2, T4, TP1 150 202 242 5 L 60 L A
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
D Trimethoxysilane 6.1 NA9269 I 6.1, 3 2, B9, B14, B32, T20, None 227 244 Forbidden Forbidden E 40
TP4, TP13, TP38, TP45
Trimethyl borate 3 UN2416 II 3 IB2, T7, TP1 150 202 242 5 L 60 L B
Trimethyl phosphite 3 UN2329 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
1,3,5-Trimethyl-2,4,6- Forbidden
trinitrobenzene
Trimethylacetyl chloride 6.1 UN2438 I 6.1, 8, 2, B3, B9, B14, B32, None 227 244 Forbidden Forbidden D 21, 25,
3 N34, T20, TP2, TP13, 40, 100
TP38, TP45
Trimethylamine, anhydrous 2.1 UN1083 ..... 2.1 N87, T50 306 304 314, 315 Forbidden 150 kg B 40
Trimethylamine, aqueous 3 UN1297 I 3, 8 T11, TP1 None 201 243 0.5 L 2.5 L D 40, 135
solutions with not more than
50 percent trimethylamine by
mass
............................... ......... ................ II 3, 8 B1, IB2, T7, TP1 150 202 243 1 L 5 L B 40, 41
............................... ......... ................ III 3, 8 B1, IB3, T7, TP1 150 203 242 5 L 60 L A 40, 41
1,3,5-Trimethylbenzene 3 UN2325 III 3 B1, IB3, T2, TP2 150 203 242 60 L 220 L A
Trimethylchlorosilane 3 UN1298 II 3, 8 A3, A7, B77, N34, T10, None 206 243 Forbidden 5 L E 40
TP2, TP7, TP13
Trimethylcyclohexylamine 8 UN2326 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
Trimethylene glycol Forbidden
diperchlorate
Trimethylhexamethylene 6.1 UN2328 III 6.1 IB3, T4, TP2, TP13 153 203 241 60 L 220 L B
diisocyanate
Trimethylhexamethylenediamines 8 UN2327 III 8 IB3, T4, TP1 154 203 241 5 L 60 L A
Trimethylol nitromethane Forbidden
trinitrate
[[Page 304]]
Trinitro-m-cresol 1.1D UN0216 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25, 5E
2,4,6-Trinitro-1,3-diazobenzene Forbidden
2,4,6-Trinitro-1,3,5-triazido Forbidden
benzene (dry)
Trinitroacetic acid Forbidden
Trinitroacetonitrile Forbidden
Trinitroamine cobalt Forbidden
Trinitroaniline or Picramide 1.1D UN0153 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
Trinitroanisole 1.1D UN0213 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
Trinitrobenzene, dry or wetted 1.1D UN0214 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
with less than 30 percent
water, by mass
Trinitrobenzene, wetted, with 4.1 UN3367 I 4.1 162, A8, A19, N41, N84, None 211 None 0.5 kg 0.5 kg E 28, 36
not less than 10% water, by W31
mass
Trinitrobenzene, wetted with 4.1 UN1354 I 4.1 23, A2, A8, A19, N41, None 211 None 0.5 kg 0.5 kg E 28, 36
not less than 30 percent W31
water, by mass
Trinitrobenzenesulfonic acid 1.1D UN0386 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25, 5E
Trinitrobenzoic acid, dry or 1.1D UN0215 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
wetted with less than 30
percent water, by mass
Trinitrobenzoic acid, wetted 4.1 UN3368 I 4.1 162, A8, A19, N41, N84, None 211 None 0.5 kg 0.5 kg E 28, 36
with not less than 10% water W31
by mass
Trinitrobenzoic acid, wetted 4.1 UN1355 I 4.1 23, A2, A8, A19, N41, None 211 None 0.5 kg 0.5 kg E 28, 36
with not less than 30 percent W31
water, by mass
Trinitrochlorobenzene or Picryl 1.1D UN0155 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
chloride
Trinitrochlorobenzene (picryl 4.1 UN3365 I 4.1 162, A8, A19, N41, N84, None 211 None 0.5 kg 0.5 kg E 28, 36
chloride), wetted, with not W31
less than 10% water by mass
Trinitroethanol Forbidden
Trinitroethylnitrate Forbidden
Trinitrofluorenone 1.1D UN0387 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
Trinitromethane Forbidden
1,3,5-Trinitronaphthalene Forbidden
Trinitronaphthalene 1.1D UN0217 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
Trinitrophenetole 1.1D UN0218 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
[[Page 305]]
Trinitrophenol (picric acid), 4.1 UN3364 I 4.1 23, A8, A19, N41, N84, None 211 None 0.5 kg 0.5 kg E 28, 36
wetted, with not less than 10 W31
percent water by mass
Trinitrophenol or Picric acid, 1.1D UN0154 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25, 5E
dry or wetted with less than
30 percent water, by mass
Trinitrophenol, wetted with not 4.1 UN1344 I 4.1 162, A8, A19, N41, W31 None 211 None 1 kg 15 kg E 28, 36
less than 30 percent water, by
mass
2,4,6-Trinitrophenyl guanidine Forbidden ................ ..... ........ ....................... ............ .......... ........
(dry)
2,4,6-Trinitrophenyl nitramine Forbidden ................ ..... ........ ....................... ............ .......... ........
2,4,6-Trinitrophenyl Forbidden ................ ..... ........ ....................... ............ .......... ........
trimethylol methyl nitramine
trinitrate (dry)
Trinitrophenylmethylnitramine 1.1D UN0208 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
or Tetryl
Trinitroresorcinol or Styphnic 1.1D UN0219 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25, 5E
acid, dry or wetted with less
than 20 percent water, or
mixture of alcohol and water,
by mass
Trinitroresorcinol, wetted or 1.1D UN0394 ..... 1.1D 385 None 62 None Forbidden Forbidden 04 25, 5E
Styphnic acid, wetted with not
less than 20 percent water, or
mixture of alcohol and water
by mass
2,4,6-Trinitroso-3-methyl Forbidden
nitraminoanisole
Trinitrotetramine cobalt Forbidden
nitrate
Trinitrotoluene and 1.1D UN0388 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
Trinitrobenzene mixtures or
TNT and trinitrobenzene
mixtures or TNT and
hexanitrostilbene mixtures or
Trinitrotoluene and
hexanitrostilnene mixtures
Trinitrotoluene mixtures 1.1D UN0389 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
containing Trinitrobenzene and
Hexanitrostilbene or TNT
mixtures containing
trinitrobenzene and
hexanitrostilbene
Trinitrotoluene or TNT, dry or 1.1D UN0209 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
wetted with less than 30
percent water, by mass
Trinitrotoluene (TNT), wetted, 4.1 UN3366 I 4.1 162, A8, A19, N41, N84, None 211 None 0.5 kg 0.5 kg E 28, 36
with not less than 10 percent W31
water by mass
Trinitrotoluene, wetted or TNT, 4.1 UN1356 I 4.1 23, A2, A8, A19, N41, None 211 None 0.5 kg 0.5 kg E 28, 36
wetted, with not less than 30 W31
percent water by mass
Tripropylamine 3 UN2260 III 3, 8 B1, IB3, T4, TP1 150 203 242 5 L 60 L A 40
Tripropylene 3 UN2057 II 3 IB2, T4, TP2 150 202 242 5 L 60 L B
......... III 3 B1, IB3, T2, TP2 150 203 242 60 L 220 L A
[[Page 306]]
Tris-(1-aziridinyl)phosphine 6.1 UN2501 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
oxide, solution
............................... ......... ................ III 6.1 IB3, T4, TP1 153 203 241 60 L 220 L A
Tris, bis-bifluoroamino Forbidden
diethoxy propane (TVOPA)
Tritonal 1.1D UN0390 ..... 1.1D ....................... None 62 None Forbidden Forbidden 04 25
Tungsten hexafluoride 2.3 UN2196 ..... 2.3, 8 2, N86 None 338 None Forbidden Forbidden D 40
Turpentine 3 UN1299 III 3 B1, IB3, T2, TP2 150 203 242 60 L 220 L A
Turpentine substitute 3 UN1300 I 3 T11, TP1, TP8, TP27 None 201 243 1 L 30 L B
............................... ......... ................ II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Undecane 3 UN2330 III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Uranium hexafluoride, 6.1 UN3507 I 6.1, 7, 369 420 None None Less than Less than A 132
radioactive material, excepted 8 .1 kg .1 kg
package, less than 0.1 kg per
package, non-fissile or
fissile-excepted
Urea hydrogen peroxide 5.1 UN1511 III 5.1, 8 A1, A7, A29, IB8, IP3, 152 213 240 25 kg 100 kg A 13
T1, TP33
Urea nitrate, dry or wetted 1.1D UN0220 ..... 1.1D 119 None 62 None Forbidden Forbidden 04 25
with less than 20 percent
water, by mass
Urea nitrate, wetted, with not 4.1 UN3370 I 4.1 162, A8, A19, N41, N84, None 211 None 0.5 kg 0.5 kg E 28, 36
less than 10 percent water by W31
mass
Urea nitrate, wetted with not 4.1 UN1357 I 4.1 23, 39, A8, A19, N41, None 211 None 1 kg 15 kg E 28, 36
less than 20 percent water, by W31
mass
Urea peroxide, see Urea
hydrogen peroxide
Valeraldehyde 3 UN2058 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
Valeric acid, see Corrosive
liquids, n.o.s.
Valeryl chloride 8 UN2502 II 8, 3 A3, A6, A7, B2, IB2, 154 202 243 1 L 30 L C 40
N34, T7, TP2
G Vanadium compound, n.o.s 6.1 UN3285 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg B
......... ................ II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg B
......... ................ III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg
Vanadium oxytrichloride 8 UN2443 II 8 A3, A6, A7, B2, B16, 154 202 242 Forbidden 30 L C 40
IB2, N34, T7, TP2
Vanadium pentoxide, non-fused 6.1 UN2862 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 40
form
[[Page 307]]
Vanadium tetrachloride 8 UN2444 I 8 A3, A6, A7, B4, N34, None 201 243 Forbidden 2.5 L C 40
T10, TP2
Vanadium trichloride 8 UN2475 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A 40
Vanadyl sulfate 6.1 UN2931 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Vehicle, flammable gas powered 9 UN3166 ..... 9 135, A200 220 220 220 Forbidden No limit A
or Vehicle, fuel cell,
flammable gas powered
Vehicle, flammable liquid 9 UN3166 ..... 9 135, A200 220 220 220 No limit No limit A
powered or Vehicle, fuel cell,
flammable liquid powered
Very signal cartridge, see
Cartridges, signal
Vinyl acetate, stabilized 3 UN1301 II 3 387, IB2, T4, TP1 150 202 242 5 L 60 L C 25
Vinyl bromide, stabilized 2.1 UN1085 ..... 2.1 387, N86, T50 306 304 314, 315 Forbidden 150 kg B 25, 40
Vinyl butyrate, stabilized 3 UN2838 II 3 387, IB2, T4, TP1 150 202 242 5 L 60 L C 25
Vinyl chloride, stabilized 2.1 UN1086 ..... 2.1 21, 387, B44, N86, T50 306 304 314, 315 Forbidden 150 kg B 25, 40
Vinyl chloroacetate 6.1 UN2589 II 6.1, 3 IB2, T7, TP2 153 202 243 5 L 60 L A
Vinyl ethyl ether, stabilized 3 UN1302 I 3 387, A3, T11, TP2 None 201 243 1 L 30 L D 25
Vinyl fluoride, stabilized 2.1 UN1860 ..... 2.1 387, N86 306 304 314, 315 Forbidden 150 kg E 25, 40
Vinyl isobutyl ether, 3 UN1304 II 3 387, IB2, T4, TP1 150 202 242 5 L 60 L C 25
stabilized
Vinyl methyl ether, stabilized 2.1 UN1087 ..... 2.1 387, B44, T50 306 304 314, 315 Forbidden 150 kg B 25, 40
Vinyl nitrate polymer Forbidden
Vinylidene chloride, stabilized 3 UN1303 I 3 387, T12, TP2, TP7 150 201 243 1 L 30 L D 25, 40
Vinylpyridines, stabilized 6.1 UN3073 II 6.1, 3, 387, IB1, T7, TP2, TP13 153 202 243 1 L 30 L B 21, 25,
8 40, 52,
100
Vinyltoluenes, stabilized 3 UN2618 III 3 387, B1, IB3, T2, TP1 150 203 242 60 L 220 L C 25
Vinyltrichlorosilane 3 UN1305 II 3, 8 A3, A7, B6, N34, T10, None 206 243 Forbidden 5 L B 40
TP2, TP7, TP13
Warheads, rocket with burster 1.4D UN0370 ..... 1.4D ....................... None 62 62 Forbidden 75 kg 02 25
or expelling charge
Warheads, rocket with burster 1.4F UN0371 ..... 1.4F ....................... None 62 None Forbidden Forbidden 05 25
or expelling charge
Warheads, rocket with bursting 1.1D UN0286 ..... 1.1D ....................... None 62 62 Forbidden Forbidden 04 25
charge
Warheads, rocket with bursting 1.2D UN0287 ..... 1.2D ....................... None 62 62 Forbidden Forbidden 04 25
charge
Warheads, rocket with bursting 1.1F UN0369 ..... 1.1F ....................... None 62 None Forbidden Forbidden 05 25
charge
Warheads, torpedo with bursting 1.1D UN0221 ..... 1.1D ....................... None 62 62 Forbidden Forbidden 04 25
charge
G Water-reactive liquid, 4.3 UN3129 I 4.3, 8 T14, TP2, TP7, TP13 None 201 243 Forbidden 1 L D 13, 148
corrosive, n.o.s
II 4.3, 8 IB1, T11, TP2, TP7 None 202 243 1 L 5 L E 13, 85,
148
III 4.3, 8 IB2, T7, TP2, TP7 None 203 242 5 L 60 L E 13, 148
[[Page 308]]
G Water-reactive liquid, n.o.s 4.3 UN3148 I 4.3 T13, TP2, TP7, TP41, None 201 244 Forbidden 1 L E 13, 40,
W31 148
......... II 4.3 IB1, T7, TP2, TP7, W31 None 202 243 1 L 5 L E 13, 40,
148
......... III 4.3 IB2, T7, TP2, TP7, W31 None 203 242 5 L 60 L E 13, 40,
148
G Water-reactive liquid, toxic, 4.3 UN3130 I 4.3, 6.1 A4 None 201 243 Forbidden 1 L D 13, 148
n.o.s
II 4.3, 6.1 IB1 None 202 243 1 L 5 L E 13, 85,
148
III 4.3, 6.1 IB2 None 203 242 5 L 60 L E 13, 85,
148
G Water-reactive solid, 4.3 UN3131 I 4.3, 8 IB4, IP1, N40, T9, TP7, None 211 242 Forbidden 15 kg D 13, 148
corrosive, n.o.s TP33, W31
......... II 4.3, 8 IB6, IP2, T3, TP33, 151 212 242 15 kg 50 kg E 13, 85,
W31, W40 148
......... III 4.3, 8 IB8, IP4, T1, TP33, W31 151 213 241 25 kg 100 kg E 13, 85,
148
G Water-reactive solid, 4.3 UN3132 I 4.3, 4.1 IB4, N40, W31 None 211 242 Forbidden 15 kg D 13, 148
flammable, n.o.s
......... II 4.3, 4.1 IB4, T3, TP33, W31, W40 151 212 242 15 kg 50 kg E 13, 148
......... III 4.3, 4.1 IB6, T1, TP33, W31 151 213 241 25 kg 100 kg E 13, 148
G Water-reactive solid, n.o.s 4.3 UN2813 I 4.3 IB4, N40, T9, TP7, None 211 242 Forbidden 15 kg E 13, 40,
TP33, W32 148
......... II 4.3 B132, IB7, IP2, IP21, 151 212 242 15 kg 50 kg E 13, 40,
T3, TP33, W31, W40 148
............................... ......... ................ III 4.3 B132, IB8, IP21, T1, 151 213 241 25 kg 100 kg E 13, 40,
TP33, W31 148
G Water-reactive, solid, 4.3 UN3133 II 4.3, 5.1 ....................... None 214 214 Forbidden Forbidden E 13, 40,
oxidizing, n.o.s 148
III 4.3, 5.1 ....................... None 214 214 Forbidden Forbidden E 13, 40,
148
G Water-reactive solid, self- 4.3 UN3135 I 4.3, 4.2 N40, W31 None 211 242 Forbidden 15 kg E 13, 148
heating, n.o.s
......... II 4.3, 4.2 IB5, IP2, T3, TP33, None 212 242 15 kg 50 kg E 13, 148
W31, W40
[[Page 309]]
......... III 4.3, 4.2 IB8, IP4, T1, TP33, W31 None 213 241 25 kg 100 kg E 13, 148
G Water-reactive solid, toxic, 4.3 UN3134 I 4.3, 6.1 A8, IB4, IP1, N40, W31 None 211 242 Forbidden 15 kg D 13, 148
n.o.s
......... II 4.3, 6.1 IB5, IP2, T3, TP33, 151 212 242 15 kg 50 kg E 13, 85,
W31, W40 148
......... III 4.3, 6.1 IB8, IP4, T1, TP33, W31 151 213 241 25 kg 100 kg E 13, 85,
148
Wheel chair, electric, see
Battery powered vehicle or
Battery powered equipment
White acid, see Hydrofluoric
acid
Wood preservatives, liquid 3 UN1306 II 3 149, IB2, T4, TP1, TP8 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A 40
A I W Wool waste, wet 4.2 UN1387 III 4.2 ....................... 151 213 240 Forbidden Forbidden A
Xanthates 4.2 UN3342 II 4.2 IB6, IP2, T3, TP33, W31 None 212 241 15 kg 50 kg D 40
......... III 4.2 IB8, IP3, T1, TP33, W31 None 213 241 25 kg 100 kg D 40
Xenon, compressed 2.2 UN2036 ..... 2.2 ....................... 306, 307 302 None 75 kg 150 kg A
Xenon, refrigerated liquid 2.2 UN2591 ..... 2.2 T75, TP5 320 None None 50 kg 500 kg D
(cryogenic liquids)
Xylenes 3 UN1307 II 3 IB2, T4, TP1 150 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB3, T2, TP1 150 203 242 60 L 220 L A
Xylenols, solid 6.1 UN2261 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Xylenols, liquid 6.1 UN3430 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
Xylidines, liquid 6.1 UN1711 II 6.1 IB2, T7, TP2 153 202 243 5 L 60 L A
Xylidines, solid 6.1 UN3452 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
Xylyl bromide, liquid 6.1 UN1701 II 6.1 A3, A6, A7, IB2, N33, None 340 None Forbidden 60 L D 40
T7, TP2, TP13, W31
Xylyl bromide, solid 6.1 UN3417 II 6.1 A3, A6, A7, IB8, IP2, None 340 None 25 kg 100 kg B 40
IP4, N33, T3, TP33
p-Xylyl diazide Forbidden
Zinc ammonium nitrite 5.1 UN1512 II 5.1 IB8, IP4, T3, TP33 None 212 242 5 kg 25 kg E
Zinc arsenate or Zinc arsenite 6.1 UN1712 II 6.1 IB8, IP2, IP4, T3, TP33 153 212 242 25 kg 100 kg A
or Zinc arsenate and zinc
arsenite mixtures
Zinc ashes 4.3 UN1435 III 4.3 A1, A19, IB8, IP4, T1, 151 213 241 25 kg 100 kg A 13, 148
TP33, W100
Zinc bisulfite solution, see
Bisulfites, aqueous solutions,
n.o.s.
Zinc bromate 5.1 UN2469 III 5.1 A1, A29, IB8, IP3, T1, 152 213 240 25 kg 100 kg A 56, 58
TP33
Zinc chlorate 5.1 UN1513 II 5.1 A9, IB8, IP2, IP4, N34, 152 212 242 5 kg 25 kg A 56, 58
T3, TP33
Zinc chloride, anhydrous 8 UN2331 III 8 IB8, IP3, T1, TP33 None 213 240 25 kg 100 kg A
Zinc chloride, solution 8 UN1840 III 8 IB3, T4, TP2 154 203 241 5 L 60 L A
Zinc cyanide 6.1 UN1713 I 6.1 IB7, IP1, T6, TP33 None 211 242 5 kg 50 kg A 52
Zinc dithionite or Zinc 9 UN1931 III None IB8, IP3, T1, TP33 155 204 240 100 kg 200 kg A 13, 26,
hydrosulfite 123
Zinc fluorosilicate 6.1 UN2855 III 6.1 IB8, IP3, T1, TP33 153 213 240 100 kg 200 kg A 52
[[Page 310]]
Zinc hydrosulfite, see Zinc
dithionite
Zinc muriate solution, see Zinc
chloride, solution
Zinc nitrate 5.1 UN1514 II 5.1 IB8, IP2, IP4, T3, TP33 152 212 240 5 kg 25 kg A
Zinc permanganate 5.1 UN1515 II 5.1 IB6, IP2, T3, TP33 152 212 242 5 kg 25 kg D 56, 58,
138
Zinc peroxide 5.1 UN1516 II 5.1 IB6, IP2, T3, TP33, 152 212 242 5 kg 25 kg C 13, 52,
W100 66, 75,
148
Zinc phosphide 4.3 UN1714 I 4.3, 6.1 A19, N40, W32 None 211 None Forbidden 15 kg E 13, 40,
52, 85,
148
Zinc powder or Zinc dust 4.3 UN1436 I 4.3, 4.2 A19, IB4, IP1, N40, W31 None 211 242 Forbidden 15 kg A 13, 52,
53, 148
......... II 4.3, 4.2 A19, IB7, IP2, T3, None 212 242 15 kg 50 kg A 13, 52,
TP33, W31, W40 53, 148
......... III 4.3, 4.2 IB8, IP4, T1, TP33, W31 None 213 242 25 kg 100 kg A 13, 52,
53, 148
Zinc resinate 4.1 UN2714 III 4.1 A1, IB6, T1, TP33 151 213 240 25 kg 100 kg A
Zinc selenate, see Selenates or
Selenites
Zinc selenite, see Selenates or
Selenites
Zinc silicofluoride, see Zinc
fluorosilicate
Zirconium, dry, coiled wire, 4.1 UN2858 III 4.1 A1, W100 151 213 240 25 kg 100 kg A 13,
finished metal sheets, strip 147,
(thinner than 254 microns but 148
not thinner than 18 microns)
Zirconium, dry, finished 4.2 UN2009 III 4.2 A1, A19, W31 None 213 240 25 kg 100 kg D 13, 148
sheets, strip or coiled wire
Zirconium hydride 4.1 UN1437 II 4.1 A19, A20, IB4, N34, T3, None 212 240 15 kg 50 kg E
TP33, W31, W40
Zirconium nitrate 5.1 UN2728 III 5.1 A1, A29, IB8, IP3, T1, 152 213 240 25 kg 100 kg A
TP33
Zirconium picramate, dry or 1.3C UN0236 ..... 1.3C ....................... None 62 None Forbidden Forbidden 04 25, 5E
wetted with less than 20
percent water, by mass
[[Page 311]]
Zirconium picramate, wetted 4.1 UN1517 I 4.1 23, N41, W31 None 211 None 1 kg 15 kg D 28, 36
with not less than 20 percent
water, by mass
Zirconium powder, dry 4.2 UN2008 I 4.2 T21, TP7, TP33, W31 None 211 242 Forbidden Forbidden D 13, 148
......... II 4.2 A19, A20, IB6, IP2, N5, None 212 241 15 kg 50 kg D 13, 148
N34, T3, TP33, W31
......... III 4.2 B135, IB8, IP4, T1, None 213 241 25 kg 100 kg D 13, 148
TP33, W31
Zirconium powder, wetted with 4.1 UN1358 II 4.1 A19, A20, IB6, IP2, None 212 241 15 kg 50 kg E 13, 74,
not less than 25 percent water N34, T3, TP33, W31, W40 147,
(a visible excess of water 148
must be present) (a)
mechanically produced,
particle size less than 53
microns; (b) chemically
produced, particle size less
than 840 microns
Zirconium scrap 4.2 UN1932 III 4.2 B135, IB8, IP21, N34, None 213 240 Forbidden Forbidden D 13, 148
T1, TP33, W31
Zirconium suspended in a liquid 3 UN1308 I 3 ....................... None 201 243 Forbidden Forbidden B
............................... ......... ................ II 3 IB2 None 202 242 5 L 60 L B
............................... ......... ................ III 3 B1, IB2 150 203 242 60 L 220 L B
Zirconium tetrachloride 8 UN2503 III 8 IB8, IP3, T1, TP33 154 213 240 25 kg 100 kg A
[[Page 312]]
Appendix A to Sec. 172.101--List of Hazardous Substances and Reportable
Quantities
1. This appendix lists materials and their corresponding reportable
quantities (RQ's) that are listed or designated as ``hazardous
substances'' under section 101(14) of the Comprehensive Environmental
Response, Compensation, and Liability Act, 42 U.S.C. 9601(14) (CERCLA;
42 U.S.C. 9601 et seq). This listing fulfills the requirement of CERCLA,
42 U.S.C. 9656(a), that all ``hazardous substances,'' as defined in 42
U.S.C. 9601(14), be listed and regulated as hazardous materials under 49
U.S.C. 5101-5127. That definition includes substances listed under
sections 311(b)(2)(A) and 307(a) of the Federal Water Pollution Control
Act, 33 U.S.C. 1321(b)(2)(A) and 1317(a), section 3001 of the Solid
Waste Disposal Act, 42 U.S.C. 6921, and section 112 of the Clean Air
Act, 42 U.S.C. 7412. In addition, this list contains materials that the
Administrator of the Environmental Protection Agency has determined to
be hazardous substances in accordance with section 102 of CERCLA, 42
U.S.C. 9602. It should be noted that 42 U.S.C. 9656(b) provides that
common and contract carriers may be held liable under laws other than
CERCLA for the release of a hazardous substance as defined in that Act,
during transportation that commenced before the effective date of the
listing and regulating of that substance as a hazardous material under
49 U.S.C. 5101-5127.
2. This appendix is divided into two TABLES which are entitled
``TABLE 1--HAZARDOUS SUBSTANCES OTHER THAN RADIONUCLIDES'' and ``TABLE
2--RADIONUCLIDES.'' A material listed in this appendix is regulated as a
hazardous material and a hazardous substance under this subchapter if it
meets the definition of a hazardous substance in Sec. 171.8 of this
subchapter.
3. The procedure for selecting a proper shipping name for a
hazardous substance is set forth in Sec. 172.101(c).
4. Column 1 of TABLE 1, entitled ``Hazardous substance'', contains
the names of those elements and compounds that are hazardous substances.
Following the listing of elements and compounds is a listing of waste
streams. These waste streams appear on the list in numerical sequence
and are referenced by the appropriate ``D'', ``F'', or ``K'' numbers.
Column 2 of TABLE 1, entitled ``Reportable quantity (RQ)'', contains the
reportable quantity (RQ), in pounds and kilograms, for each hazardous
substance listed in Column 1 of TABLE 1.
5. A series of notes is used throughout TABLE 1 and TABLE 2 to
provide additional information concerning certain hazardous substances.
These notes are explained at the end of each TABLE.
6. TABLE 2 lists radionuclides that are hazardous substances and
their corresponding RQ's. The RQ's in table 2 for radionuclides are
expressed in units of curies and terabecquerels, whereas those in table
1 are expressed in units of pounds and kilograms. If a material is
listed in both table 1 and table 2, the lower RQ shall apply.
Radionuclides are listed in alphabetical order. The RQ's for
radionuclides are given in the radiological unit of measure of curie,
abbreviated ``Ci'', followed, in parentheses, by an equivalent unit
measured in terabecquerels, abbreviated ``TBq''.
7. For mixtures of radionuclides, the following requirements shall
be used in determining if a package contains an RQ of a hazardous
substance: (i) if the identity and quantity (in curies or
terabecquerels) of each radionuclide in a mixture or solution is known,
the ratio between the quantity per package (in curies or terabecquerels)
and the RQ for the radionuclide must be determined for each
radionuclide. A package contains an RQ of a hazardous substance when the
sum of the ratios for the radionuclides in the mixture or solution is
equal to or greater than one; (ii) if the identity of each radionuclide
in a mixture or solution is known but the quantity per package (in
curies or terabecquerels) of one or more of the radionuclides is
unknown, an RQ of a hazardous substance is present in a package when the
total quantity (in curies or terabecquerels) of the mixture or solution
is equal to or greater than the lowest RQ of any individual radionuclide
in the mixture or solution; and (iii) if the identity of one or more
radionuclides in a mixture or solution is unknown (or if the identity of
a radionuclide by itself is unknown), an RQ of a hazardous substance is
present when the total quantity (in curies or terabecquerels) in a
package is equal to or greater than either one curie or the lowest RQ of
any known individual radionuclide in the mixture or solution, whichever
is lower.
Table 1 to Appendix A--Hazardous Substances Other Than Radionuclides
------------------------------------------------------------------------
Reportable
quantity (RQ)
Hazardous substance pounds
(kilograms)
------------------------------------------------------------------------
A2213................................................... 5000 (2270)
Acenaphthene............................................ 100 (45.4)
Acenaphthylene.......................................... 5000 (2270)
Acetaldehyde............................................ 1000 (454)
Acetaldehyde, chloro-................................... 1000 (454)
[[Page 313]]
Acetaldehyde, trichloro-................................ 5000 (2270)
Acetamide............................................... 100 (45.4)
Acetamide, N-(aminothioxomethyl)-....................... 1000 (454)
Acetamide, N-(4-ethoxyphenyl)-.......................... 100 (45.4)
Acetamide, N-9H-fluoren-2-yl-........................... 1 (0.454)
Acetamide, 2-fluoro-.................................... 100 (45.4)
Acetic acid............................................. 5000 (2270)
Acetic acid, (2,4-dichlorophenoxy)-, salts & esters..... 100 (45.4)
Acetic acid, ethyl ester................................ 5000 (2270)
Acetic acid, fluoro-, sodium salt....................... 10 (4.54)
Acetic acid, lead(2 + ) salt............................ 10 (4.54)
Acetic acid, thallium(1 + ) salt........................ 100 (45.4)
Acetic acid, (2,4,5-trichlorophenoxy)-.................. 1000 (454)
Acetic anhydride........................................ 5000 (2270)
Acetone................................................. 5000 (2270)
Acetone cyanohydrin..................................... 10 (4.54)
Acetonitrile............................................ 5000 (2270)
Acetophenone............................................ 5000 (2270)
2-Acetylaminofluorene................................... 1 (0.454)
Acetyl bromide.......................................... 5000 (2270)
Acetyl chloride......................................... 5000 (2270)
1-Acetyl-2-thiourea..................................... 1000 (454)
Acrolein................................................ 1 (0.454)
Acrylamide.............................................. 5000 (2270)
Acrylic acid............................................ 5000 (2270)
Acrylonitrile........................................... 100 (45.4)
Adipic acid............................................. 5000 (2270)
Aldicarb................................................ 1 (0.454)
Aldicarb sulfone........................................ 100 (45.4)
Aldrin.................................................. 1 (0.454)
Allyl alcohol........................................... 100 (45.4)
Allyl chloride.......................................... 1000 (454)
Aluminum phosphide...................................... 100 (45.4)
Aluminum sulfate........................................ 5000 (2270)
4-Aminobiphenyl......................................... 1 (0.454)
5-(Aminomethyl)-3-isoxazolol............................ 1000 (454)
4-Aminopyridine......................................... 1000 (454)
Amitrole................................................ 10 (4.54)
Ammonia................................................. 100 (45.4)
Ammonium acetate........................................ 5000 (2270)
Ammonium benzoate....................................... 5000 (2270)
Ammonium bicarbonate.................................... 5000 (2270)
Ammonium bichromate..................................... 10 (4.54)
Ammonium bifluoride..................................... 100 (45.4)
Ammonium bisulfite...................................... 5000 (2270)
Ammonium carbamate...................................... 5000 (2270)
Ammonium carbonate...................................... 5000 (2270)
Ammonium chloride....................................... 5000 (2270)
Ammonium chromate....................................... 10 (4.54)
Ammonium citrate, dibasic............................... 5000 (2270)
Ammonium dichromate @................................... 10 (4.54)
Ammonium fluoborate..................................... 5000 (2270)
Ammonium fluoride....................................... 100 (45.4)
Ammonium hydroxide...................................... 1000 (454)
Ammonium oxalate........................................ 5000 (2270)
Ammonium picrate........................................ 10 (4.54)
Ammonium silicofluoride................................. 1000 (454)
Ammonium sulfamate...................................... 5000 (2270)
Ammonium sulfide........................................ 100 (45.4)
Ammonium sulfite........................................ 5000 (2270)
Ammonium tartrate....................................... 5000 (2270)
Ammonium thiocyanate.................................... 5000 (2270)
Ammonium vanadate....................................... 1000 (454)
Amyl acetate............................................ 5000 (2270)
iso-Amyl acetate....................................
sec-Amyl acetate....................................
tert-Amyl acetate...................................
Aniline................................................. 5000 (2270)
o-Anisidine............................................. 100 (45.4)
Anthracene.............................................. 5000 (2270)
[[Page 314]]
Antimony [cent]......................................... 5000 (2270)
Antimony pentachloride.................................. 1000 (454)
Antimony potassium tartrate............................. 100 (45.4)
Antimony tribromide..................................... 1000 (454)
Antimony trichloride.................................... 1000 (454)
Antimony trifluoride.................................... 1000 (454)
Antimony trioxide....................................... 1000 (454)
Argentate(1-), bis(cyano-C)-, potassium................. 1 (0.454)
Aroclor 1016............................................ 1 (0.454)
Aroclor 1221............................................ 1 (0.454)
Aroclor 1232............................................ 1 (0.454)
Aroclor 1242............................................ 1 (0.454)
Aroclor 1248............................................ 1 (0.454)
Aroclor 1254............................................ 1 (0.454)
Aroclor 1260............................................ 1 (0.454)
Aroclors................................................ 1 (0.454)
Arsenic [cent].......................................... 1 (0.454)
Arsenic acid H3AsO4..................................... 1 (0.454)
Arsenic disulfide....................................... 1 (0.454)
Arsenic oxide As2O3..................................... 1 (0.454)
Arsenic oxide As2O5..................................... 1 (0.454)
Arsenic pentoxide....................................... 1 (0.454)
Arsenic trichloride..................................... 1 (0.454)
Arsenic trioxide........................................ 1 (0.454)
Arsenic trisulfide...................................... 1 (0.454)
Arsine, diethyl-........................................ 1 (0.454)
Arsinic acid, dimethyl-................................. 1 (0.454)
Arsonous dichloride, phenyl-............................ 1 (0.454)
Asbestos [cent][cent]................................... 1 (0.454)
Auramine................................................ 100 (45.4)
Azaserine............................................... 1 (0.454)
Aziridine............................................... 1 (0.454)
Aziridine, 2-methyl-.................................... 1 (0.454)
Azirino[2',3':3,4]pyrrolo[1,2-a]indole-4,7-dione, 6- 10 (4.54)
amino-8-[[(aminocarbonyl)oxy]methyl]-1,1a,2,8,8a,8b-
hexahydro-8a-methoxy-5-methyl-, [1aS-
(1aalpha,8beta,8aalpha, 8balpha)]-.....................
Barban.................................................. 10 (4.54)
Barium cyanide.......................................... 10 (4.54)
Bendiocarb.............................................. 100 (45.4)
Bendiocarb phenol....................................... 1000 (454)
Benomyl................................................. 10 (4.54)
Benz[j]aceanthrylene, 1,2-dihydro-3-methyl-............. 10 (4.54)
Benz[c]acridine......................................... 100 (45.4)
Benzal chloride......................................... 5000 (2270)
Benzamide, 3,5-dichloro-N-(1,1-dimethyl-2-propynyl)-.... 5000 (2270)
Benz[a]anthracene....................................... 10 (4.54)
1,2-Benzanthracene...................................... 10 (4.54)
Benz[a]anthracene, 7,12-dimethyl-....................... 1 (0.454)
Benzenamine............................................. 5000 (2270)
Benzenamine, 4,4'-carbonimidoylbis (N,N dimethyl-....... 100 (45.4)
Benzenamine, 4-chloro-.................................. 1000 (454)
Benzenamine, 4-chloro-2-methyl-, hydrochloride.......... 100 (45.4)
Benzenamine, N,N-dimethyl-4-(phenylazo)-................ 10 (4.54)
Benzenamine, 2-methyl-.................................. 100 (45.4)
Benzenamine, 4-methyl-.................................. 100 (45.4)
Benzenamine, 4,4'-methylenebis[2-chloro-................ 10 (4.54)
Benzenamine, 2-methyl-, hydrochloride................... 100 (45.4)
Benzenamine, 2-methyl-5-nitro-.......................... 100 (45.4)
Benzenamine, 4-nitro-................................... 5000 (2270)
Benzene................................................. 10 (4.54)
Benzeneacetic acid, 4-chloro-[alpha]-(4-chlorophenyl)- 10 (4.54)
[alpha]-hydroxy-, ethyl ester..........................
Benzene, 1-bromo-4-phenoxy-............................. 100 (45.4)
Benzenebutanoic acid, 4-[bis(2-chloroethyl)amino]-...... 10 (4.54)
Benzene, chloro-........................................ 100 (45.4)
Benzene, (chloromethyl)-................................ 100 (45.4)
Benzenediamine, ar-methyl-.............................. 10 (4.54)
1,2-Benzenedicarboxylic acid, bis(2-ethylhexyl) ester... 100 (45.4)
1,2-Benzenedicarboxylic acid, dibutyl ester............. 10 (4.54)
1,2-Benzenedicarboxylic acid, diethyl ester............. 1000 (454)
1,2-Benzenedicarboxylic acid, dimethyl ester............ 5000 (2270)
1,2-Benzenedicarboxylic acid, dioctyl ester............. 5000 (2270)
[[Page 315]]
Benzene, 1,2-dichloro-.................................. 100 (45.4)
Benzene, 1,3-dichloro-.................................. 100 (45.4)
Benzene, 1,4-dichloro-.................................. 100 (45.4)
Benzene, 1,1'-(2,2-dichloroethylidene) bis[4-chloro-.... 1 (0.454)
Benzene, (dichloromethyl)-.............................. 5000 (2270)
Benzene, 1,3-diisocyanatomethyl-........................ 100 (45.4)
Benzene, dimethyl-...................................... 100 (45.4)
1,3-Benzenediol......................................... 5000 (2270)
1,2-Benzenediol,4-[1-hydroxy-2-(methylamino) ethyl]-.... 1000 (454)
Benzeneethanamine, alpha,alpha-dimethyl-................ 5000 (2270)
Benzene, hexachloro-.................................... 10 (4.54)
Benzene, hexahydro-..................................... 1000 (454)
Benzene, methyl-........................................ 1000 (454)
Benzene, 1-methyl-2,4-dinitro-.......................... 10 (4.54)
Benzene, 2-methyl-1,3-dinitro-.......................... 100 (45.4)
Benzene, (1-methylethyl)-............................... 5000 (2270)
Benzene, nitro-......................................... 1000 (454)
Benzene, pentachloro-................................... 10 (4.54)
Benzene, pentachloronitro-.............................. 100 (45.4)
Benzenesulfonic acid chloride........................... 100 (45.4)
Benzenesulfonyl chloride................................ 100 (45.4)
Benzene,1,2,4,5-tetrachloro-............................ 5000 (2270)
Benzenethiol............................................ 100 (45.4)
Benzene,1,1'-(2,2,2-trichloroethylidene) bis[4-chloro-.. 1 (0.454)
Benzene,1,1'-(2,2,2-trichloroethylidene) bis[4-methoxy-. 1 (0.454)
Benzene, (trichloromethyl)-............................. 10 (4.54)
Benzene, 1,3,5-trinitro-................................ 10 (4.54)
Benzidine............................................... 1 (0.454)
Benzo[a]anthracene...................................... 10 (4.54)
1,3-Benzodioxole, 5-(1-propenyl)-1...................... 100 (45.4)
1,3-Benzodioxole, 5-(2-propenyl)-....................... 100 (45.4)
1,3-Benzodioxole, 5-propyl-............................. 10 (4.54)
1,3-Benzodioxol-4-ol, 2,2-dimethyl-..................... 1000 (454)
1,3-Benzodioxol-4-ol, 2,2-dimethyl-, methyl carbamate... 100 (45.4)
Benzo[b]fluoranthene.................................... 1 (0.454)
Benzo(k)fluoranthene.................................... 5000 (2270)
7-Benzofuranol, 2,3-dihydro-2,2-dimethyl-............... 10 (4.54)
7-Benzofuranol, 2,3-dihydro-2,2-dimethyl-, 10 (4.54)
methylcarbamate........................................
Benzoic acid............................................ 5000 (2270)
Benzoic acid, 2-hydroxy-, compd. with (3aS-cis)- 100 (45.4)
1,2,3,3a,8,8a-hexahydro-1,3a,8-trimethylpyrrolo [2,3-
b]indol-5-yl methylcarbamate ester (1:1)...............
Benzonitrile............................................ 5000 (2270)
Benzo[rst]pentaphene.................................... 10 (4.54)
Benzo[ghi]perylene...................................... 5000 (2270)
2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-1-phenylbutyl)- 100 (45.4)
, & salts..............................................
Benzo[a]pyrene.......................................... 1 (0.454)
3,4-Benzopyrene......................................... 1 (0.454)
p-Benzoquinone.......................................... 10 (4.54)
Benzotrichloride........................................ 10 (4.54)
Benzoyl chloride........................................ 1000 (454)
Benzyl chloride......................................... 100 (45.4)
Beryllium [cent]........................................ 10 (4.54)
Beryllium chloride...................................... 1 (0.454)
Beryllium fluoride...................................... 1 (0.454)
Beryllium nitrate....................................... 1 (0.454)
Beryllium powder [cent]................................. 10 (4.54)
alpha-BHC............................................... 10 (4.54)
beta-BHC................................................ 1 (0.454)
delta-BHC............................................... 1 (0.454)
gamma-BHC............................................... 1 (0.454)
2,2'-Bioxirane.......................................... 10 (4.54)
Biphenyl................................................ 100 (45.4)
[1,1'-Biphenyl]-4,4'-diamine............................ 1 (0.454)
[1,1'-Biphenyl]-4,4'-diamine,3,3'-dichloro-............. 1 (0.454)
[1,1'-Biphenyl]-4,4'-diamine,3,3'-dimethoxy-............ 100 (45.4)
[1,1'-Biphenyl]-4,4'-diamine,3,3'-dimethyl-............. 10 (4.54)
Bis(2-chloroethoxy) methane............................. 1000 (454)
Bis(2-chloroethyl) ether................................ 10 (4.54)
Bis(chloromethyl) ether................................. 10 (4.54)
Bis(2-ethylhexyl) phthalate............................. 100 (45.4)
[[Page 316]]
Bromoacetone............................................ 1000 (454)
Bromoform............................................... 100 (45.4)
Bromomethane............................................ 1000 (454)
4-Bromophenyl phenyl ether.............................. 100 (45.4)
Brucine................................................. 100 (45.4)
1,3-Butadiene........................................... 10 (4.54)
1,3-Butadiene, 1,1,2,3,4,4-hexachloro-.................. 1 (0.454)
1-Butanamine, N-butyl-N-nitroso-........................ 10 (4.54)
1-Butanol............................................... 5000 (2270)
2-Butanone.............................................. 5000 (2270)
2-Butanone, 3,3-dimethyl-1(methylthio)-, O 100 (45.4)
[(methylamino) carbonyl] oxime.........................
2-Butanone peroxide..................................... 10 (4.54)
2-Butenal............................................... 100 (45.4)
2-Butene, 1,4-dichloro-................................. 1 (0.454)
2-Butenoic acid, 2-methyl-, 7-[[2,3-dihydroxy-2-(1- 10 (4.54)
methoxyethyl)-3-methyl-1-oxobutoxy] methyl]-2,3,5,7a-
tetrahydro-1H-pyrrolizin-1-yl ester, [1S-[1alpha(Z),
7(2S*,3R*),7aalpha]]-..................................
Butyl acetate........................................... 5000 (2270)
iso-Butyl acetate...................................
sec-Butyl acetate...................................
tert-Butyl acetate..................................
n-Butyl alcohol......................................... 5000 (2270)
Butylamine.............................................. 1000 (454)
iso-Butylamine......................................
sec-Butylamine......................................
tert-Butylamine.....................................
Butyl benzyl phthalate.................................. 100 (45.4)
n-Butyl phthalate....................................... 10 (4.54)
Butyric acid............................................ 5000 (2270)
iso-Butyric acid....................................
Cacodylic acid.......................................... 1 (0.454)
Cadmium [cent].......................................... 10 (4.54)
Cadmium acetate......................................... 10 (4.54)
Cadmium bromide......................................... 10 (4.54)
Cadmium chloride........................................ 10 (4.54)
Calcium arsenate........................................ 1 (0.454)
Calcium arsenite........................................ 1 (0.454)
Calcium carbide......................................... 10 (4.54)
Calcium chromate........................................ 10 (4.54)
Calcium cyanamide....................................... 1000 (454)
Calcium cyanide Ca(CN)2................................. 10 (4.54)
Calcium dodecylbenzenesulfonate......................... 1000 (454)
Calcium hypochlorite.................................... 10 (4.54)
Captan.................................................. 10 (4.54)
Carbamic acid, 1H-benzimidazol-2-yl, methyl ester....... 10 (4.54)
Carbamic acid, [1-[(butylamino)carbonyl]-1H-benzimidazol- 10 (4.54)
2-yl]-, methyl ester...................................
Carbamic acid, (3-chlorophenyl)-, 4-chloro-2-butynyl 10 (4.54)
ester..................................................
Carbamic acid, [(dibutylamino)-thio]methyl-, 2,3-dihydro- 1000 (454)
2,2-dimethyl-7-benzofuranyl ester......................
Carbamic acid, dimethyl-,1-[(dimethyl-amino)carbonyl]-5- 1 (0.454)
methyl-1H-pyrazol-3-yl ester...........................
Carbamic acid, dimethyl-, 3-methyl-1-(1-methylethyl)-1H- 100 (45.4)
pyrazol-5-yl ester.....................................
Carbamic acid, ethyl ester.............................. 100 (45.4)
Carbamic acid, methyl-, 3-methylphenyl ester............ 1000 (454)
Carbamic acid, methylnitroso-, ethyl ester.............. 1 (0.454)
Carbamic acid, [1,2-phenylenebis(iminocarbonothioyl)] 10 (4.54)
bis-, dimethyl ester...................................
Carbamic acid, phenyl-, 1-methylethyl ester............. 1000 (454)
Carbamic chloride, dimethyl-............................ 1 (0.454)
Carbamodithioic acid, 1,2-ethanediylbis-, salts & esters 5000 (2270)
Carbamothioic acid, bis(1-methylethyl)-, S-(2,3-dichloro- 100 (45.4)
2-propenyl) ester......................................
Carbamothioic acid, bis(1-methylethyl)-, S-(2,3,3- 100 (45.4)
trichloro-2-propenyl) ester............................
Carbamothioic acid, dipropyl-, S-(phenylmethyl) ester... 5000 (2270)
Carbaryl................................................ 100 (45.4)
Carbendazim............................................. 10 (4.54)
Carbofuran.............................................. 10 (4.54)
Carbofuran phenol....................................... 10 (4.54)
Carbon disulfide........................................ 100 (45.4)
Carbonic acid, dithallium(1 + ) salt.................... 100 (45.4)
Carbonic dichloride..................................... 10 (4.54)
Carbonic difluoride..................................... 1000 (454)
Carbonochloridic acid, methyl ester..................... 1000 (454)
Carbon oxyfluoride...................................... 1000 (454)
Carbon tetrachloride.................................... 10 (4.54)
[[Page 317]]
Carbonyl sulfide........................................ 100 (45.4)
Carbosulfan............................................. 1000 (454)
Catechol................................................ 100 (45.4)
Chloral................................................. 5000 (2270)
Chloramben.............................................. 100 (45.4)
Chlorambucil............................................ 10 (4.54)
Chlordane............................................... 1 (0.454)
Chlordane, alpha & gamma isomers........................ 1 (0.454)
CHLORDANE (TECHNICAL MIXTURE AND METABOLITES)........... 1 (0.454)
Chlorinated camphene.................................... 1 (0.454)
Chlorine................................................ 10 (4.54)
Chlornaphazine.......................................... 100 (45.4)
Chloroacetaldehyde...................................... 1000 (454)
Chloroacetic acid....................................... 100 (45.4)
2-Chloroacetophenone.................................... 100 (45.4)
p-Chloroaniline......................................... 1000 (454)
Chlorobenzene........................................... 100 (45.4)
Chlorobenzilate......................................... 10 (4.54)
p-Chloro-m-cresol....................................... 5000 (2270)
Chlorodibromomethane.................................... 100 (45.4)
1-Chloro-2,3-epoxypropane............................... 100 (45.4)
Chloroethane............................................ 100 (45.4)
2-Chloroethyl vinyl ether............................... 1000 (454)
Chloroform.............................................. 10 (4.54)
Chloromethane........................................... 100 (45.4)
Chloromethyl methyl ether............................... 10 (4.54)
beta-Chloronaphthalene.................................. 5000 (2270)
2-Chloronaphthalene..................................... 5000 (2270)
2-Chlorophenol.......................................... 100 (45.4)
o-Chlorophenol.......................................... 100 (45.4)
4-Chlorophenyl phenyl ether............................. 5000 (2270)
1-(o-Chlorophenyl)thiourea.............................. 100 (45.4)
Chloroprene............................................. 100 (45.4)
3-Chloropropionitrile................................... 1000 (454)
Chlorosulfonic acid..................................... 1000 (454)
4-Chloro-o-toluidine, hydrochloride..................... 100 (45.4)
Chlorpyrifos............................................ 1 (0.454)
Chromic acetate......................................... 1000 (454)
Chromic acid............................................ 10 (4.54)
Chromic acid H2CrO4, calcium salt....................... 10 (4.54)
Chromic sulfate......................................... 1000 (454)
Chromium [cent]......................................... 5000 (2270)
Chromous chloride....................................... 1000 (454)
Chrysene................................................ 100 (45.4)
Cobaltous bromide....................................... 1000 (454)
Cobaltous formate....................................... 1000 (454)
Cobaltous sulfamate..................................... 1000 (454)
Coke Oven Emissions..................................... 1 (0.454)
Copper [cent]........................................... 5000 (2270)
Copper chloride \@\..................................... 10 (4.54)
Copper cyanide Cu(CN)................................... 10 (4.54)
Coumaphos............................................... 10 (4.54)
Creosote................................................ 1 (0.454)
Cresol (cresylic acid).................................. 100 (45.4)
m-Cresol................................................ 100 (45.4)
o-Cresol................................................ 100 (45.4)
p-Cresol................................................ 100 (45.4)
Cresols (isomers and mixture)........................... 100 (45.4)
Cresylic acid (isomers and mixture)..................... 100 (45.4)
Crotonaldehyde.......................................... 100 (45.4)
Cumene.................................................. 5000 (2270)
m-Cumenyl methylcarbamate............................... 10 (4.54)
Cupric acetate.......................................... 100 (45.4)
Cupric acetoarsenite.................................... 1 (0.454)
Cupric chloride......................................... 10 (4.54)
Cupric nitrate.......................................... 100 (45.4)
Cupric oxalate.......................................... 100 (45.4)
Cupric sulfate.......................................... 10 (4.54)
Cupric sulfate, ammoniated.............................. 100 (45.4)
Cupric tartrate......................................... 100 (45.4)
[[Page 318]]
Cyanides (soluble salts and complexes) not otherwise 10 (4.54)
specified..............................................
Cyanogen................................................ 100 (45.4)
Cyanogen bromide (CN)Br................................. 1000 (454)
Cyanogen chloride (CN)Cl................................ 10 (4.54)
2,5-Cyclohexadiene-1,4-dione............................ 10 (4.54)
Cyclohexane............................................. 1000 (454)
Cyclohexane, 1,2,3,4,5,6-hexachloro-, (1[alpha], 1 (0.454)
2[alpha], 3[beta]-, 4[alpha], 5[alpha], 6[beta]).......
Cyclohexanone........................................... 5000 (2270)
2-Cyclohexyl-4,6-dinitrophenol.......................... 100 (45.4)
1,3-Cyclopentadiene, 1,2,3,4,5,5-hexachloro-............ 10 (4.54)
Cyclophosphamide........................................ 10 (4.54)
2,4-D Acid.............................................. 100 (45.4)
2,4-D Ester............................................. 100 (45.4)
2,4-D, salts and esters................................. 100 (45.4)
Daunomycin.............................................. 10 (4.54)
DDD..................................................... 1 (0.454)
4,4'-DDD................................................ 1 (0.454)
DDE (72-55-9) ......................................... 1 (0.454)
DDE (3547-04-4) ....................................... 5000 (2270)
4,4'-DDE................................................ 1 (0.454)
DDT..................................................... 1 (0.454)
4,4'-DDT................................................ 1 (0.454)
DEHP.................................................... 100 (45.4)
Diallate................................................ 100 (45.4)
Diazinon................................................ 1 (0.454)
Diazomethane............................................ 100 (45.4)
Dibenz[a,h]anthracene................................... 1 (0.454)
1,2:5,6-Dibenzanthracene................................ 1 (0.454)
Dibenzo[a,h]anthracene.................................. 1 (0.454)
Dibenzofuran............................................ 100 (45.4)
Dibenzo[a,i]pyrene...................................... 10 (4.54)
1,2-Dibromo-3-chloropropane............................. 1 (0.454)
Dibromoethane........................................... 1 (0.454)
Dibutyl phthalate....................................... 10 (4.54)
Di-n-butyl phthalate.................................... 10 (4.54)
Dicamba................................................. 1000 (454)
Dichlobenil............................................. 100 (45.4)
Dichlone................................................ 1 (0.454)
Dichlorobenzene......................................... 100 (45.4)
1,2-Dichlorobenzene..................................... 100 (45.4)
1,3-Dichlorobenzene..................................... 100 (45.4)
1,4-Dichlorobenzene..................................... 100 (45.4)
m-Dichlorobenzene....................................... 100 (45.4)
o-Dichlorobenzene....................................... 100 (45.4)
p-Dichlorobenzene....................................... 100 (45.4)
3,3'-Dichlorobenzidine.................................. 1 (0.454)
Dichlorobromomethane.................................... 5000 (2270)
1,4-Dichloro-2-butene................................... 1 (0.454)
Dichlorodifluoromethane................................. 5000 (2270)
1,1-Dichloroethane...................................... 1000 (454)
1,2-Dichloroethane...................................... 100 (45.4)
1,1-Dichloroethylene.................................... 100 (45.4)
1,2-Dichloroethylene.................................... 1000 (454)
Dichloroethyl ether..................................... 10 (4.54)
Dichloroisopropyl ether................................. 1000 (454)
Dichloromethane......................................... 1000 (454)
Dichloromethoxyethane................................... 1000 (454)
Dichloromethyl ether.................................... 10 (4.54)
2,4-Dichlorophenol...................................... 100 (45.4)
2,6-Dichlorophenol...................................... 100 (45.4)
Dichlorophenylarsine.................................... 1 (0.454)
Dichloropropane......................................... 1000 (454)
1,1-Dichloropropane.................................
1,3-Dichloropropane.................................
1,2-Dichloropropane..................................... 1000 (454)
Dichloropropane-Dichloropropene (mixture)............... 100 (45.4)
Dichloropropene......................................... 100 (45.4)
2,3-Dichloropropene.................................
1,3-Dichloropropene..................................... 100 (45.4)
2,2-Dichloropropionic acid.............................. 5000 (2270)
[[Page 319]]
Dichlorvos.............................................. 10 (4.54)
Dicofol................................................. 10 (4.54)
Dieldrin................................................ 1 (0.454)
1,2:3,4-Diepoxybutane................................... 10 (4.54)
Diethanolamine.......................................... 100 (45.4)
Diethylamine............................................ 100 (45.4)
N,N-Diethylaniline...................................... 1000 (454)
Diethylarsine........................................... 1 (0.454)
Diethylene glycol, dicarbamate.......................... 5000 (2270)
1,4-Diethyleneoxide..................................... 100 (45.4)
Diethylhexyl phthalate.................................. 100 (45.4)
N,N'-Diethylhydrazine................................... 10 (4.54)
O,O-Diethyl S-methyl dithiophosphate.................... 5000 (2270)
Diethyl-p-nitrophenyl phosphate......................... 100 (45.4)
Diethyl phthalate....................................... 1000 (454)
O,O-Diethyl O-pyrazinyl phosphorothioate................ 100 (45.4)
Diethylstilbestrol...................................... 1 (0.454)
Diethyl sulfate......................................... 10 (4.54)
Dihydrosafrole.......................................... 10 (4.54)
Diisopropylfluorophosphate (DFP)........................ 100 (45.4)
1,4:5,8-Dimethanonaphthalene, 1,2,3,4,10,10-hexachloro- 1 (0.454)
1,4,4a,5,8,8a-hexahydro-, (1alpha, 4alpha, 4abeta,
5alpha, 8alpha, 8abeta)-...............................
1,4:5,8-Dimethanonaphthalene, 1,2,3,4,10,10-hexachloro-
1,4,4a,5,8,8a-hexahydro-, (1alpha, 4alpha, 4abeta,
5beta, 8beta, 8abeta)-1 (0.454)........................
2,7:3,6-Dimethanonaphth[2,3-b]oxirene,3,4,5,6,9,9- 1 (0.454)
hexachloro-1a,2,2a,3,6,6a,7,7a-octahydro-, (1aalpha,
2beta, 2aalpha, 3beta, 6beta, 6aalpha, 7beta, 7aalpha)-
2,7:3,6-Dimethanonaphth[2, 3-b]oxirene,3,4,5,6,9,9- 1 (0.454)
hexachloro-1a,2,2a,3,6,6a,7,7a-octahydro-, (1aalpha,
2beta, 2abeta, 3alpha, 6alpha, 6abeta, 7beta, 7aalpha)-
, & metabolites........................................
Dimethoate.............................................. 10 (4.54)
3,3'-Dimethoxybenzidine................................. 100 (45.4)
Dimethylamine........................................... 1000 (454)
Dimethyl aminoazobenzene................................ 10 (4.54)
p-Dimethylaminoazobenzene............................... 10 (4.54)
N,N-Dimethylaniline..................................... 100 (45.4)
7,12-Dimethylbenz[a]anthracene.......................... 1 (0.454)
3,3'-Dimethylbenzidine.................................. 10 (4.54)
alpha,alpha-Dimethylbenzylhydroperoxide................. 10 (4.54)
Dimethylcarbamoyl chloride.............................. 1 (0.454)
Dimethylformamide....................................... 100 (45.4)
1,1-Dimethylhydrazine................................... 10 (4.54)
1,2-Dimethylhydrazine................................... 1 (0.454)
Dimethylhydrazine, unsymmetrical @...................... 10 (4.54)
alpha,alpha-Dimethylphenethylamine...................... 5000 (2270)
2,4-Dimethylphenol...................................... 100 (45.4)
Dimethyl phthalate...................................... 5000 (2270)
Dimethyl sulfate........................................ 100 (45.4)
Dimetilan............................................... 1 (0.454)
Dinitrobenzene (mixed).................................. 100 (45.4)
m-Dinitrobenzene....................................
o-Dinitrobenzene....................................
p-Dinitrobenzene....................................
4,6-Dinitro-o-cresol, and salts......................... 10 (4.54)
Dinitrogen tetroxide @.................................. 10 (4.54)
Dinitrophenol........................................... 10 (4.54)
2,5-Dinitrophenol...................................
2,6-Dinitrophenol...................................
2,4-Dinitrophenol....................................... 10 (4.54)
Dinitrotoluene.......................................... 10 (4.54)
3,4-Dinitrotoluene..................................
2,4-Dinitrotoluene...................................... 10 (4.54)
2,6-Dinitrotoluene...................................... 100 (45.4)
Dinoseb................................................. 1000 (454)
Di-n-octyl phthalate.................................... 5000 (2270)
1,4-Dioxane............................................. 100 (45.4)
1,2-Diphenylhydrazine................................... 10 (4.54)
Diphosphoramide, octamethyl-............................ 100 (45.4)
Diphosphoric acid, tetraethyl ester..................... 10 (4.54)
Dipropylamine........................................... 5000 (2270)
Di-n-propylnitrosamine.................................. 10 (4.54)
Diquat.................................................. 1000 (454)
[[Page 320]]
Disulfoton.............................................. 1 (0.454)
Dithiobiuret............................................ 100 (45.4)
1,3-Dithiolane-2-carboxaldehyde, 2,4-dimethyl-, O- 100 (45.4)
[(methylamino)-carbonyl]oxime..........................
Diuron.................................................. 100 (45.4)
Dodecylbenzenesulfonic acid............................. 1000 (454)
Endosulfan.............................................. 1 (0.454)
alpha-Endosulfan........................................ 1 (0.454)
beta-Endosulfan......................................... 1 (0.454)
Endosulfan sulfate...................................... 1 (0.454)
Endothall............................................... 1000 (454)
Endrin.................................................. 1 (0.454)
Endrin aldehyde......................................... 1 (0.454)
Endrin, & metabolites................................... 1 (0.454)
Epichlorohydrin......................................... 100 (45.4)
Epinephrine............................................. 1000 (454)
1,2-Epoxybutane......................................... 100 (45.4)
Ethanal................................................. 1000 (454)
Ethanamine, N,N-diethyl-................................ 5000 (2270)
Ethanamine, N-ethyl-N-nitroso-.......................... 1 (0.454)
1,2-Ethanediamine, N,N-dimethyl-N'-2-pyridinyl-N'-(2- 5000 (2270)
thienylmethyl)-........................................
Ethane, 1,2-dibromo-.................................... 1 (0.454)
Ethane, 1,1-dichloro-................................... 1000 (454)
Ethane, 1,2-dichloro-................................... 100 (45.4)
Ethanedinitrile......................................... 100 (45.4)
Ethane, hexachloro-..................................... 100 (45.4)
Ethane, 1,1'-[methylenebis(oxy)]bis[2-chloro-........... 1000 (454)
Ethane, 1,1'-oxybis-.................................... 100 (45.4)
Ethane, 1,1'-oxybis[2-chloro-........................... 10 (4.54)
Ethane, pentachloro-.................................... 10 (4.54)
Ethane, 1,1,1,2-tetrachloro-............................ 100 (45.4)
Ethane, 1,1,2,2-tetrachloro-............................ 100 (45.4)
Ethanethioamide......................................... 10 (4.54)
Ethane, 1,1,1-trichloro-................................ 1000 (454)
Ethane, 1,1,2-trichloro-................................ 100 (45.4)
Ethanimidothioic acid, 2-(dimethylamino)-N-hydroxy-2-oxo- 5000 (2270)
, methyl ester.........................................
Ethanimidothioic acid, 2-(dimethylamino)-N- 100 (45.4)
[[(methylamino) carbonyl]oxy]-2-oxo-, methyl ester.....
Ethanimidothioic acid, N-[[(methylamino) carbonyl]oxy]-, 100 (45.4)
methyl ester...........................................
Ethanimidothioic acid, 100 (45.4)
N,N'[thiobis[(methylimino)carbonyloxy]] bis-, dimethyl
ester..................................................
Ethanol, 2-ethoxy-...................................... 1000 (454)
Ethanol, 2,2'-(nitrosoimino)bis-........................ 1 (0.454)
Ethanol, 2,2'-oxybis-, dicarbamate...................... 5000 (2270)
Ethanone, 1-phenyl-..................................... 5000 (2270)
Ethene, chloro-......................................... 1 (0.454)
Ethene, (2-chloroethoxy)-............................... 1000 (454)
Ethene, 1,1-dichloro-................................... 100 (45.4)
Ethene, 1,2-dichloro-(E)................................ 1000 (454)
Ethene, tetrachloro-.................................... 100 (45.4)
Ethene, trichloro-...................................... 100 (45.4)
Ethion.................................................. 10 (4.54)
Ethyl acetate........................................... 5000 (2270)
Ethyl acrylate.......................................... 1000 (454)
Ethylbenzene............................................ 1000 (454)
Ethyl carbamate......................................... 100 (45.4)
Ethyl chloride.......................................... 100 (45.4)
Ethyl cyanide........................................... 10 (4.54)
Ethylenebisdithiocarbamic acid, salts & esters.......... 5000 (2270)
Ethylenediamine......................................... 5000 (2270)
Ethylenediamine-tetraacetic acid (EDTA)................. 5000 (2270)
Ethylene dibromide...................................... 1 (0.454)
Ethylene dichloride..................................... 100 (45.4)
Ethylene glycol......................................... 5000 (2270)
Ethylene glycol monoethyl ether......................... 1000 (454)
Ethylene oxide.......................................... 10 (4.54)
Ethylenethiourea........................................ 10 (4.54)
Ethylenimine............................................ 1 (0.454)
Ethyl ether............................................. 100 (45.4)
Ethylidene dichloride................................... 1000 (454)
Ethyl methacrylate...................................... 1000 (454)
Ethyl methanesulfonate.................................. 1 (0.454)
Ethyl methyl ketone @................................... 5000 (2270)
[[Page 321]]
Famphur................................................. 1000 (454)
Ferric ammonium citrate................................. 1000 (454)
Ferric ammonium oxalate................................. 1000 (454)
Ferric chloride......................................... 1000 (454)
Ferric fluoride......................................... 100 (45.4)
Ferric nitrate.......................................... 1000 (454)
Ferric sulfate.......................................... 1000 (454)
Ferrous ammonium sulfate................................ 1000 (454)
Ferrous chloride........................................ 100 (45.4)
Ferrous sulfate......................................... 1000 (454)
Fluoranthene............................................ 100 (45.4)
Fluorene................................................ 5000 (2270)
Fluorine................................................ 10 (4.54)
Fluoroacetamide......................................... 100 (45.4)
Fluoroacetic acid, sodium salt.......................... 10 (4.54)
Formaldehyde............................................ 100 (45.4)
Formetanate hydrochloride............................... 100 (45.4)
Formic acid............................................. 5000 (2270)
Formparanate............................................ 100 (45.4)
Fulminic acid, mercury(2 + )salt........................ 10 (4.54)
Fumaric acid............................................ 5000 (2270)
Furan................................................... 100 (45.4)
2-Furancarboxyaldehyde.................................. 5000 (2270)
2,5-Furandione.......................................... 5000 (2270)
Furan, tetrahydro-...................................... 1000 (454)
Furfural................................................ 5000 (2270)
Furfuran................................................ 100 (45.4)
Glucopyranose, 2-deoxy-2-(3-methyl-3-nitrosoureido)-, D- 1 (0.454)
D-Glucose, 2-deoxy-2-[[(methylnitrosoamino)- 1 (0.454)
carbonyl]amino]-.......................................
Glycidylaldehyde........................................ 10 (4.54)
Guanidine, N-methyl-N'-nitro-N-nitroso-................. 10 (4.54)
Guthion................................................. 1 (0.454)
Heptachlor.............................................. 1 (0.454)
Heptachlor epoxide...................................... 1 (0.454)
Hexachlorobenzene....................................... 10 (4.54)
Hexachlorobutadiene..................................... 1 (0.454)
Hexachlorocyclopentadiene............................... 10 (4.54)
Hexachloroethane........................................ 100 (45.4)
Hexachlorophene......................................... 100 (45.4)
Hexachloropropene....................................... 1000 (454)
Hexaethyl tetraphosphate................................ 100 (45.4)
Hexamethylene-1,6-diisocyanate.......................... 100 (45.4)
Hexamethylphosphoramide................................. 1 (0.454)
Hexane.................................................. 5000 (2270)
Hexone.................................................. 5000 (2270)
Hydrazine............................................... 1 (0.454)
Hydrazinecarbothioamide................................. 100 (45.4)
Hydrazine, 1,2-diethyl-................................. 10 (4.54)
Hydrazine, 1,1-dimethyl-................................ 10 (4.54)
Hydrazine, 1,2-dimethyl-................................ 1 (0.454)
Hydrazine, 1,2-diphenyl-................................ 10 (4.54)
Hydrazine, methyl-...................................... 10 (4.54)
Hydrochloric acid....................................... 5000 (2270)
Hydrocyanic acid........................................ 10 (4.54)
Hydrofluoric acid....................................... 100 (45.4)
Hydrogen chloride....................................... 5000 (2270)
Hydrogen cyanide........................................ 10 (4.54)
Hydrogen fluoride....................................... 100 (45.4)
Hydrogen phosphide...................................... 100 (45.4)
Hydrogen sulfide H2S.................................... 100 (45.4)
Hydroperoxide, 1-methyl-1-phenylethyl-.................. 10 (4.54)
Hydroquinone............................................ 100 (45.4)
2-Imidazolidinethione................................... 10 (4.54)
Indeno(1,2,3-cd)pyrene.................................. 100 (45.4)
Iodomethane............................................. 100 (45.4)
1,3-Isobenzofurandione.................................. 5000 (2270)
Isobutyl alcohol........................................ 5000 (2270)
Isodrin................................................. 1 (0.454)
Isolan.................................................. 100 (45.4)
Isophorone.............................................. 5000 (2270)
[[Page 322]]
Isoprene................................................ 100 (45.4)
Isopropanolamine dodecylbenzenesulfonate................ 1000 (454)
3-Isopropylphenyl N-methylcarbamate..................... 10 (4.54)
Isosafrole.............................................. 100 (45.4)
3(2H)-Isoxazolone, 5-(aminomethyl)-..................... 1000 (454)
Kepone.................................................. 1 (0.454)
Lasiocarpine............................................ 10 (4.54)
Lead [cent]............................................. 10 (4.54)
Lead acetate............................................ 10 (4.54)
Lead arsenate........................................... 1 (0.454)
Lead, bis(acetato-O)tetrahydroxytri-.................... 10 (4.54)
Lead chloride........................................... 10 (4.54)
Lead fluoborate......................................... 10 (4.54)
Lead fluoride........................................... 10 (4.54)
Lead iodide............................................. 10 (4.54)
Lead nitrate............................................ 10 (4.54)
Lead phosphate.......................................... 10 (4.54)
Lead stearate........................................... 10 (4.54)
Lead subacetate......................................... 10 (4.54)
Lead sulfate............................................ 10 (4.54)
Lead sulfide............................................ 10 (4.54)
Lead thiocyanate........................................ 10 (4.54)
Lindane................................................. 1 (0.454)
Lindane (all isomers)................................... 1 (0.454)
Lithium chromate........................................ 10 (4.54)
Malathion............................................... 100 (45.4)
Maleic acid............................................. 5000 (2270)
Maleic anhydride........................................ 5000 (2270)
Maleic hydrazide........................................ 5000 (2270)
Malononitrile........................................... 1000 (454)
Manganese, bis(dimethylcarbamodithioato-S,S')-.......... 10 (4.54)
Manganese dimethyldithiocarbamate....................... 10 (4.54)
MDI..................................................... 5000 (2270)
MEK..................................................... 5000 (2270)
Melphalan............................................... 1 (0.454)
Mercaptodimethur........................................ 10 (4.54)
Mercuric cyanide........................................ 1 (0.454)
Mercuric nitrate........................................ 10 (4.54)
Mercuric sulfate........................................ 10 (4.54)
Mercuric thiocyanate.................................... 10 (4.54)
Mercurous nitrate....................................... 10 (4.54)
Mercury................................................. 1 (0.454)
Mercury, (acetato-O)phenyl-............................. 100 (45.4)
Mercury fulminate....................................... 10 (4.54)
Methacrylonitrile....................................... 1000 (454)
Methanamine, N-methyl-.................................. 1000 (454)
Methanamine, N-methyl-N-nitroso-........................ 10 (4.54)
Methane, bromo-......................................... 1000 (454)
Methane, chloro-........................................ 100 (45.4)
Methane, chloromethoxy-................................. 10 (4.54)
Methane, dibromo-....................................... 1000 (454)
Methane, dichloro-...................................... 1000 (454)
Methane, dichlorodifluoro-.............................. 5000 (2270)
Methane, iodo-.......................................... 100 (45.4)
Methane, isocyanato-.................................... 10 (4.54)
Methane, oxybis(chloro-................................. 10 (4.54)
Methanesulfenyl chloride, trichloro-.................... 100 (45.4)
Methanesulfonic acid, ethyl ester....................... 1 (0.454)
Methane, tetrachloro-................................... 10 (4.54)
Methane, tetranitro-.................................... 10 (4.54)
Methanethiol............................................ 100 (45.4)
Methane, tribromo-...................................... 100 (45.4)
Methane, trichloro-..................................... 10 (4.54)
Methane, trichlorofluoro-............................... 5000 (2270)
Methanimidamide, N,N-dimethyl-N'-[3-[[(methylamino) 100 (45.4)
carbonyl] oxy].........................................
phenyl]-, monohydrochloride.............................
Methanimidamide, N,N-dimethyl-N'-[2-methyl-4- 100 (45.4)
[[(methylamino)carbonyl] oxy]phenyl]-..................
6,9-Methano-2,4,3-benzodioxathiepin,6,7,8,9,10,10- 1 (0.454)
hexachloro-1,5,5a,6,9,9a-hexahydro-, 3-oxide...........
4,7-Methano-1H-indene, 1,4,5,6,7,8,8-heptachloro- 1 (0.454)
3a,4,7,7a-tetrahydro-..................................
4,7-Methano-1H-indene, 1,2,4,5,6,7,8,8-octachloro- 1 (0.454)
2,3,3a,4,7,7a-hexahydro-...............................
[[Page 323]]
Methanol................................................ 5000 (2270)
Methapyrilene........................................... 5000 (2270)
1,3,4-Metheno-2H-cyclobuta[cd]pentalen-2-one, 1 (0.454)
1,1a,3,3a,4,5,5,5a,5b,6-decachlorooctahydro-...........
Methiocarb.............................................. 10 (4.54)
Methomyl................................................ 100 (45.4)
Methoxychlor............................................ 1 (0.454)
Methyl alcohol.......................................... 5000 (2270)
Methylamine \@\......................................... 100 (45.4)
2-Methyl aziridine...................................... 1 (0.454)
Methyl bromide.......................................... 1000 (454)
1-Methylbutadiene....................................... 100 (45.4)
Methyl chloride......................................... 100 (45.4)
Methyl chlorocarbonate.................................. 1000 (454)
Methyl chloroform....................................... 1000 (454)
Methyl chloroformate \@\................................ 1000 (454)
Methyl chloromethyl ether \@\........................... 10 (4.54)
3-Methylcholanthrene.................................... 10 (4.54)
4,4'-Methylenebis(2-chloroaniline)...................... 10 (4.54)
Methylene bromide....................................... 1000 (454)
Methylene chloride...................................... 1000 (454)
4,4'-Methylenedianiline................................. 10 (4.54)
Methylene diphenyl diisocyanate......................... 5000 (2270)
Methyl ethyl ketone..................................... 5000 (2270)
Methyl ethyl ketone peroxide............................ 10 (4.54)
Methyl hydrazine........................................ 10 (4.54)
Methyl iodide........................................... 100 (45.4)
Methyl isobutyl ketone.................................. 5000 (2270)
Methyl isocyanate....................................... 10 (4.54)
2-Methyllactonitrile.................................... 10 (4.54)
Methyl mercaptan........................................ 100 (45.4)
Methyl methacrylate..................................... 1000 (454)
Methyl parathion........................................ 100 (45.4)
4-Methyl-2-pentanone.................................... 5000 (2270)
Methyl tert-butyl ether................................. 1000 (454)
Methylthiouracil........................................ 10 (4.54)
Metolcarb............................................... 1000 (454)
Mevinphos............................................... 10 (4.54)
Mexacarbate............................................. 1000 (454)
Mitomycin C............................................. 10 (4.54)
MNNG.................................................... 10 (4.54)
Monoethylamine.......................................... 100 (45.4)
Monomethylamine......................................... 100 (45.4)
Naled................................................... 10 (4.54)
5,12-Naphthacenedione, 8-acetyl-10-[(3-amino-2,3,6- 10 (4.54)
trideoxy-alpha-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-
tetrahydro-6,8,11-trihydroxy-1-methoxy-, (8S-cis)-.....
1-Naphthalenamine....................................... 100 (45.4)
2-Naphthalenamine....................................... 10 (4.54)
Naphthalenamine, N,N'-bis(2-chloroethyl)-............... 100 (45.4)
Naphthalene............................................. 100 (45.4)
Naphthalene, 2-chloro-.................................. 5000 (2270)
1,4-Naphthalenedione.................................... 5000 (2270)
2,7-Naphthalenedisulfonic acid, 3,3'-[(3,3'-dimethyl- 10 (4.54)
(1,1'-biphenyl)-4,4'-diyl)-bis(azo)]bis(5-amino-4-
hydroxy)-tetrasodium salt..............................
1-Naphthalenol, methylcarbamate......................... 100 (45.4)
Naphthenic acid......................................... 100 (45.4)
1,4-Naphthoquinone...................................... 5000 (2270)
alpha-Naphthylamine..................................... 100 (45.4)
beta-Naphthylamine...................................... 10 (4.54)
alpha-Naphthylthiourea.................................. 100 (45.4)
Nickel [cent]........................................... 100 (45.4)
Nickel ammonium sulfate................................. 100 (45.4)
Nickel carbonyl Ni(CO)4, (T-4)-......................... 10 (4.54)
Nickel chloride......................................... 100 (45.4)
Nickel cyanide Ni(CN)2.................................. 10 (4.54)
Nickel hydroxide........................................ 10 (4.54)
Nickel nitrate.......................................... 100 (45.4)
Nickel sulfate.......................................... 100 (45.4)
Nicotine, & salts....................................... 100 (45.4)
Nitric acid............................................. 1000 (454)
Nitric acid, thallium (1 + ) salt....................... 100 (45.4)
[[Page 324]]
Nitric oxide............................................ 10 (4.54)
p-Nitroaniline.......................................... 5000 (2270)
Nitrobenzene............................................ 1000 (454)
4-Nitrobiphenyl......................................... 10 (4.54)
Nitrogen dioxide........................................ 10 (4.54)
Nitrogen oxide NO....................................... 10 (4.54)
Nitrogen oxide NO2...................................... 10 (4.54)
Nitroglycerine.......................................... 10 (4.54)
Nitrophenol (mixed)..................................... 100 (45.4)
m-Nitrophenol.......................................
o-Nitrophenol........................................... 100 (45.4)
p-Nitrophenol........................................... 100 (45.4)
2-Nitrophenol........................................... 100 (45.4)
4-Nitrophenol........................................... 100 (45.4)
2-Nitropropane.......................................... 10 (4.54)
N-Nitrosodi-n-butylamine................................ 10 (4.54)
N-Nitrosodiethanolamine................................. 1 (0.454)
N-Nitrosodiethylamine................................... 1 (0.454)
N-Nitrosodimethylamine.................................. 10 (4.54)
N-Nitrosodiphenylamine.................................. 100 (45.4)
N-Nitroso-N-ethylurea................................... 1 (0.454)
N-Nitroso-N-methylurea.................................. 1 (0.454)
N-Nitroso-N-methylurethane.............................. 1 (0.454)
N-Nitrosomethylvinylamine............................... 10 (4.54)
N-Nitrosomorpholine..................................... 1 (0.454)
N-Nitrosopiperidine..................................... 10 (4.54)
N-Nitrosopyrrolidine.................................... 1 (0.454)
Nitrotoluene............................................ 1000 (454)
m-Nitrotoluene......................................
o-Nitrotoluene......................................
p-Nitrotoluene......................................
5-Nitro-o-toluidine..................................... 100 (45.4)
Octamethylpyrophosphoramide............................. 100 (45.4)
Osmium oxide OsO4, (T-4)-............................... 1000 (454)
Osmium tetroxide........................................ 1000 (454)
7-Oxabicyclo[2.2.1]heptane-2,3-dicarboxylic acid........ 1000 (454)
Oxamyl.................................................. 100 (45.4)
1,2-Oxathiolane, 2,2-dioxide............................ 10 (4.54)
2H-1,3,2-Oxazaphosphorin-2-amine, N,N-bis(2-chloroethyl) 10 (4.54)
tetrahydro-, 2-oxide...................................
Oxirane................................................. 10 (4.54)
Oxiranecarboxyaldehyde.................................. 10 (4.54)
Oxirane, (chloromethyl)-................................ 100 (45.4)
Paraformaldehyde........................................ 1000 (454)
Paraldehyde............................................. 1000 (454)
Parathion............................................... 10 (4.54)
PCBs.................................................... 1 (0.454)
PCNB.................................................... 100 (45.4)
Pentachlorobenzene...................................... 10 (4.54)
Pentachloroethane....................................... 10 (4.54)
Pentachloronitrobenzene................................. 100 (45.4)
Pentachlorophenol....................................... 10 (4.54)
1,3-Pentadiene.......................................... 100 (45.4)
Perchloroethylene....................................... 100 (45.4)
Perchloromethyl mercaptan @............................. 100 (45.4)
Phenacetin.............................................. 100 (45.4)
Phenanthrene............................................ 5000 (2270)
Phenol.................................................. 1000 (454)
Phenol, 2-chloro-....................................... 100 (45.4)
Phenol, 4-chloro-3-methyl-.............................. 5000 (2270)
Phenol, 2-cyclohexyl-4,6-dinitro-....................... 100 (45.4)
Phenol, 2,4-dichloro-................................... 100 (45.4)
Phenol, 2,6-dichloro-................................... 100 (45.4)
Phenol, 4,4'-(1,2-diethyl-1,2-ethenediyl)bis-, (E)...... 1 (0.454)
Phenol, 2,4-dimethyl-................................... 100 (45.4)
Phenol, 4-(dimethylamino)-3,5-dimethyl-, methylcarbamate 1000 (454)
(ester)................................................
Phenol, (3,5-dimethyl-4-(methylthio)-, methylcarbamate.. 10 (4.54)
Phenol, 2,4-dinitro-.................................... 10 (4.54)
Phenol, methyl-......................................... 100 (45.4)
Phenol, 2-methyl-4,6-dinitro-, & salts.................. 10 (4.54)
Phenol, 2,2'-methylenebis[3,4,6-trichloro-.............. 100 (45.4)
[[Page 325]]
Phenol, 2-(1-methylethoxy)-, methylcarbamate............ 100 (45.4)
Phenol, 3-(1-methylethyl)-, methyl carbamate............ 10 (4.54)
Phenol, 3-methyl-5-(1-methylethyl)-, methyl carbamate... 1000 (454)
Phenol, 2-(1-methylpropyl)-4,6-dinitro-................. 1000 (454)
Phenol, 4-nitro-........................................ 100 (45.4)
Phenol, pentachloro-.................................... 10 (4.54)
Phenol, 2,3,4,6-tetrachloro-............................ 10 (4.54)
Phenol, 2,4,5-trichloro-................................ 10 (4.54)
Phenol, 2,4,6-trichloro-................................ 10 (4.54)
Phenol, 2,4,6-trinitro-, ammonium salt.................. 10 (4.54)
L-Phenylalanine, 4-[bis(2-chloroethyl)amino]-........... 1 (0.454)
p-Phenylenediamine...................................... 5000 (2270)
Phenyl mercaptan @...................................... 100 (45.4)
Phenylmercury acetate................................... 100 (45.4)
Phenylthiourea.......................................... 100 (45.4)
Phorate................................................. 10 (4.54)
Phosgene................................................ 10 (4.54)
Phosphine............................................... 100 (45.4)
Phosphoric acid......................................... 5000 (2270)
Phosphoric acid, diethyl 4-nitrophenyl ester............ 100 (45.4)
Phosphoric acid, lead(2 + ) salt (2:3).................. 10 (4.54)
Phosphorodithioic acid, O,O-diethyl S-[2- 1 (0.454)
(ethylthio)ethyl] ester................................
Phosphorodithioic acid, O,O-diethyl S- 10 (4.54)
[(ethylthio)methyl] ester..............................
Phosphorodithioic acid, O,O-diethyl S-methyl ester...... 5000 (2270)
Phosphorodithioic acid, O,O-dimethyl S-[2-(methylamino)- 10 (4.54)
2-oxoethyl] ester......................................
Phosphorofluoridic acid, bis(1-methylethyl) ester....... 100 (45.4)
Phosphorothioic acid, O,O-diethyl O-(4-nitrophenyl) 10 (4.54)
ester..................................................
Phosphorothioic acid, O,O-diethyl O-pyrazinyl ester..... 100 (45.4)
Phosphorothioic acid, O-[4-[(dimethylamino) 1000 (454)
sulfonyl]phenyl] O,O-dimethyl ester....................
Phosphorothioic acid, O,O-dimethyl O-(4-nitrophenyl) 100 (45.4)
ester..................................................
Phosphorus.............................................. 1 (0.454)
Phosphorus oxychloride.................................. 1000 (454)
Phosphorus pentasulfide................................. 100 (45.4)
Phosphorus sulfide...................................... 100 (45.4)
Phosphorus trichloride.................................. 1000 (454)
Phthalic anhydride...................................... 5000 (2270)
Physostigmine........................................... 100 (45.4)
Physostigmine salicylate................................ 100 (45.4)
2-Picoline.............................................. 5000 (2270)
Piperidine, 1-nitroso-.................................. 10 (4.54)
Plumbane, tetraethyl-................................... 10 (4.54)
POLYCHLORINATED BIPHENYLS............................... 1 (0.454)
Potassium arsenate...................................... 1 (0.454)
Potassium arsenite...................................... 1 (0.454)
Potassium bichromate.................................... 10 (4.54)
Potassium chromate...................................... 10 (4.54)
Potassium cyanide K(CN)................................. 10 (4.54)
Potassium hydroxide..................................... 1000 (454)
Potassium permanganate.................................. 100 (45.4)
Potassium silver cyanide................................ 1 (0.454)
Promecarb............................................... 1000 (454)
Pronamide............................................... 5000 (2270)
Propanal, 2-methyl-2-(methyl-sulfonyl)-, O- 100 (45.4)
[(methylamino)carbonyl] oxime..........................
Propanal, 2-methyl-2-(methylthio)-, O- 1 (0.454)
[(methylamino)carbonyl] oxime..........................
1-Propanamine........................................... 5000 (2270)
1-Propanamine, N-propyl-................................ 5000 (2270)
1-Propanamine, N-nitroso-N-propyl-...................... 10 (4.54)
Propane, 1,2-dibromo-3-chloro-.......................... 1 (0.454)
Propane, 1,2-dichloro-.................................. 1000 (454)
Propanedinitrile........................................ 1000 (454)
Propanenitrile.......................................... 10 (4.54)
Propanenitrile, 3-chloro-............................... 1000 (454)
Propanenitrile, 2-hydroxy-2-methyl-..................... 10 (4.54)
Propane, 2-nitro-....................................... 10 (4.54)
Propane, 2,2'-oxybis[2-chloro-.......................... 1000 (454)
1,3-Propane sultone..................................... 10 (4.54)
1,2,3-Propanetriol, trinitrate.......................... 10 (4.54)
Propanoic acid, 2-(2,4,5-trichlorophenoxy)-............. 100 (45.4)
1-Propanol, 2,3-dibromo-, phosphate (3:1)............... 10 (4.54)
1-Propanol, 2-methyl-................................... 5000 (2270)
[[Page 326]]
2-Propanone............................................. 5000 (2270)
2-Propanone, 1-bromo-................................... 1000 (454)
Propargite.............................................. 10 (4.54)
Propargyl alcohol....................................... 1000 (454)
2-Propenal.............................................. 1 (0.454)
2-Propenamide........................................... 5000 (2270)
1-Propene, 1,3-dichloro-................................ 100 (45.4)
1-Propene, 1,1,2,3,3,3-hexachloro-...................... 1000 (454)
2-Propenenitrile........................................ 100 (45.4)
2-Propenenitrile, 2-methyl-............................. 1000 (454)
2-Propenoic acid........................................ 5000 (2270)
2-Propenoic acid, ethyl ester........................... 1000 (454)
2-Propenoic acid, 2-methyl-, ethyl ester................ 1000 (454)
2-Propenoic acid, 2-methyl-, methyl ester............... 1000 (454)
2-Propen-1-ol........................................... 100 (45.4)
Propham................................................. 1000 (454)
beta-Propiolactone...................................... 10 (4.54)
Propionaldehyde......................................... 1000 (454)
Propionic acid.......................................... 5000 (2270)
Propionic anhydride..................................... 5000 (2270)
Propoxur (Baygon)....................................... 100 (45.4)
n-Propylamine........................................... 5000 (2270)
Propylene dichloride.................................... 1000 (454)
Propylene oxide......................................... 100 (45.4)
1,2-Propylenimine....................................... 1 (0.454)
2-Propyn-1-ol........................................... 1000 (454)
Prosulfocarb............................................ 5000 (2270)
Pyrene.................................................. 5000 (2270)
Pyrethrins.............................................. 1 (0.454)
3,6-Pyridazinedione, 1,2-dihydro-....................... 5000 (2270)
4-Pyridinamine.......................................... 1000 (454)
Pyridine................................................ 1000 (454)
Pyridine, 2-methyl-..................................... 5000 (2270)
Pyridine, 3-(1-methyl-2-pyrrolidinyl)-, (S)-, & salts... 100 (45.4)
2,4-(1H,3H)-Pyrimidinedione, 5-[bis(2-chloroethyl)amino]- 10 (4.54)
.......................................................
4(1H)-Pyrimidinone, 2,3-dihydro-6-methyl-2-thioxo-...... 10 (4.54)
Pyrrolidine, 1-nitroso-................................. 1 (0.454)
Pyrrolo[2,3-b] indol-5-ol,1,2,3,3a,8,8a-hexahydro-1,3a,8- 100 (45.4)
trimethyl-, methylcarbamate (ester), (3aS-cis)-........
Quinoline............................................... 5000 (2270)
Quinone................................................. 10 (4.54)
Quintobenzene........................................... 100 (45.4)
RADIONUCLIDES........................................... See Table 2
Reserpine............................................... 5000 (2270)
Resorcinol.............................................. 5000 (2270)
Safrole................................................. 100 (45.4)
Selenious acid.......................................... 10 (4.54)
Selenious acid, dithallium (1 + ) salt.................. 1000 (454)
Selenium [cent]......................................... 100 (45.4)
Selenium dioxide........................................ 10 (4.54)
Selenium oxide.......................................... 10 (4.54)
Selenium sulfide SeS2................................... 10 (4.54)
Selenourea.............................................. 1000 (454)
L-Serine, diazoacetate (ester).......................... 1 (0.454)
Silver [cent]........................................... 1000 (454)
Silver cyanide Ag(CN)................................... 1 (0.454)
Silver nitrate.......................................... 1 (0.454)
Silvex (2,4,5-TP)....................................... 100 (45.4)
Sodium.................................................. 10 (4.54)
Sodium arsenate......................................... 1 (0.454)
Sodium arsenite......................................... 1 (0.454)
Sodium azide............................................ 1000 (454)
Sodium bichromate....................................... 10 (4.54)
Sodium bifluoride....................................... 100 (45.4)
Sodium bisulfite........................................ 5000 (2270)
Sodium chromate......................................... 10 (4.54)
Sodium cyanide Na(CN)................................... 10 (4.54)
Sodium dodecylbenzenesulfonate.......................... 1000 (454)
Sodium fluoride......................................... 1000 (454)
Sodium hydrosulfide..................................... 5000 (2270)
Sodium hydroxide........................................ 1000 (454)
[[Page 327]]
Sodium hypochlorite..................................... 100 (45.4)
Sodium methylate........................................ 1000 (454)
Sodium nitrite.......................................... 100 (45.4)
Sodium phosphate, dibasic............................... 5000 (2270)
Sodium phosphate, tribasic.............................. 5000 (2270)
Sodium selenite......................................... 100 (45.4)
Streptozotocin.......................................... 1 (0.454)
Strontium chromate...................................... 10 (4.54)
Strychnidin-10-one, & salts............................. 10 (4.54)
Strychnidin-10-one, 2,3-dimethoxy-...................... 100 (45.4)
Strychnine, & salts..................................... 10 (4.54)
Styrene................................................. 1000 (454)
Styrene oxide........................................... 100 (45.4)
Sulfur chlorides @...................................... 1000 (454)
Sulfuric acid........................................... 1000 (454)
Sulfuric acid, dimethyl ester........................... 100 (45.4)
Sulfuric acid, dithallium (1 + ) salt................... 100 (45.4)
Sulfur monochloride..................................... 1000 (454)
Sulfur phosphide........................................ 100 (45.4)
2,4,5-T................................................. 1000 (454)
2,4,5-T acid............................................ 1000 (454)
2,4,5-T amines.......................................... 5000 (2270)
2,4,5-T esters.......................................... 1000 (454)
2,4,5-T salts........................................... 1000 (454)
TCDD.................................................... 1 (0.454)
TDE..................................................... 1 (0.454)
1,2,4,5-Tetrachlorobenzene.............................. 5000 (2270)
2,3,7,8-Tetrachlorodibenzo-p-dioxin..................... 1 (0.454)
1,1,1,2-Tetrachloroethane............................... 100 (45.4)
1,1,2,2-Tetrachloroethane............................... 100 (45.4)
Tetrachloroethylene..................................... 100 (45.4)
2,3,4,6-Tetrachlorophenol............................... 10 (4.54)
Tetraethyl pyrophosphate................................ 10 (4.54)
Tetraethyl lead......................................... 10 (4.54)
Tetraethyldithiopyrophosphate........................... 100 (45.4)
Tetrahydrofuran......................................... 1000 (454)
Tetranitromethane....................................... 10 (4.54)
Tetraphosphoric acid, hexaethyl ester................... 100 (45.4)
Thallic oxide........................................... 100 (45.4)
Thallium [cent]......................................... 1000 (454)
Thallium (I) acetate.................................... 100 (45.4)
Thallium (I) carbonate.................................. 100 (45.4)
Thallium chloride TlCl.................................. 100 (45.4)
Thallium (I) nitrate.................................... 100 (45.4)
Thallium oxide Tl2O3.................................... 100 (45.4)
Thallium (I) selenite................................... 1000 (454)
Thallium (I) sulfate.................................... 100 (45.4)
Thioacetamide........................................... 10 (4.54)
Thiodicarb.............................................. 100 (45.4)
Thiodiphosphoric acid, tetraethyl ester................. 100 (45.4)
Thiofanox............................................... 100 (45.4)
Thioimidodicarbonic diamide [(H2N)C(S)]2NH.............. 100 (45.4)
Thiomethanol............................................ 100 (45.4)
Thioperoxydicarbonic diamide [(H2N)C(S)]2S2, tetramethyl- 10 (4.54)
.......................................................
Thiophanate-methyl...................................... 10 (4.54)
Thiophenol.............................................. 100 (45.4)
Thiosemicarbazide....................................... 100 (45.4)
Thiourea................................................ 10 (4.54)
Thiourea, (2-chlorophenyl)-............................. 100 (45.4)
Thiourea, 1-naphthalenyl-............................... 100 (45.4)
Thiourea, phenyl-....................................... 100 (45.4)
Thiram.................................................. 10 (4.54)
Tirpate................................................. 100 (45.4)
Titanium tetrachloride.................................. 1000 (454)
Toluene................................................. 1000 (454)
Toluenediamine.......................................... 10 (4.54)
2,4-Toluene diamine..................................... 10 (4.54)
Toluene diisocyanate.................................... 100 (45.4)
2,4-Toluene diisocyanate................................ 100 (45.4)
o-Toluidine............................................. 100 (45.4)
[[Page 328]]
p-Toluidine............................................. 100 (45.4)
o-Toluidine hydrochloride............................... 100 (45.4)
Toxaphene............................................... 1 (0.454)
2,4,5-TP acid........................................... 100 (45.4)
2,4,5-TP esters......................................... 100 (45.4)
Triallate............................................... 100 (45.4)
1H-1,2,4-Triazol-3-amine................................ 10 (4.54)
Trichlorfon............................................. 100 (45.4)
1,2,4-Trichlorobenzene.................................. 100 (45.4)
1,1,1-Trichloroethane................................... 1000 (454)
1,1,2-Trichloroethane................................... 100 (45.4)
Trichloroethylene....................................... 100 (45.4)
Trichloromethanesulfenyl chloride....................... 100 (45.4)
Trichloromonofluoromethane.............................. 5000 (2270)
Trichlorophenol......................................... 10 (4.54)
2,3,4-Trichlorophenol...............................
2,3,5-Trichlorophenol...............................
2,3,6-Trichlorophenol...............................
3,4,5-Trichlorophenol...............................
2,4,5-Trichlorophenol................................... 10 (4.54)
2,4,6-Trichlorophenol................................... 10 (4.54)
Triethanolamine dodecylbenzenesulfonate................. 1000 (454)
Triethylamine........................................... 5000 (2270)
Trifluralin............................................. 10 (4.54)
Trimethylamine.......................................... 100 (45.4)
2,2,4-Trimethylpentane.................................. 1000 (454)
1,3,5-Trinitrobenzene................................... 10 (4.54)
1,3,5-Trioxane, 2,4,6-trimethyl-........................ 1000 (454)
Tris(2,3-dibromopropyl) phosphate....................... 10 (4.54)
Trypan blue............................................. 10 (4.54)
D002 Unlisted Hazardous Wastes Characteristic of 100 (45.4)
Corrosivity............................................
D001 Unlisted Hazardous Wastes Characteristic of 100 (45.4)
Ignitability...........................................
D003 Unlisted Hazardous Wastes Characteristic of 100 (45.4)
Reactivity.............................................
D004-D043 Unlisted Hazardous Wastes Characteristic of
Toxicity:
Arsenic (D004)...................................... 1 (0.454)
Barium (D005)....................................... 1000 (454)
Benzene (D018)...................................... 10 (4.54)
Cadmium (D006)...................................... 10 (4.54)
Carbon tetrachloride (D019)......................... 10 (4.54)
Chlordane (D020).................................... 1 (0.454)
Chlorobenzene (D021)................................ 100 (45.4)
Chloroform (D022)................................... 10 (4.54)
Chromium (D007)..................................... 10 (4.54)
o-Cresol (D023)..................................... 100 (45.4)
m-Cresol (D024)..................................... 100 (45.4)
p-Cresol (D025)..................................... 100 (45.4)
Cresol (D026)....................................... 100 (45.4)
2,4-D (D016)........................................ 100 (45.4)
1,4-Dichlorobenzene (D027).......................... 100 (45.4)
1,2-Dichloroethane (D028)........................... 100 (45.4)
1,1-Dichloroethylene (D029)......................... 100 (45.4)
2,4-Dinitrotoluene (D030)........................... 10 (4.54)
Endrin (D012)....................................... 1 (0.454)
Heptachlor (and epoxide) (D031)..................... 1 (0.454)
Hexachlorobenzene (D032)............................ 10 (4.54)
Hexachlorobutadiene (D033).......................... 1 (0.454)
Hexachloroethane (D034)............................. 100 (45.4)
Lead (D008)......................................... 10 (4.54)
Lindane (D013)...................................... 1 (0.454)
Mercury (D009)...................................... 1 (0.454)
Methoxychlor (D014)................................. 1 (0.454)
Methyl ethyl ketone (D035).......................... 5000 (2270)
Nitrobenzene (D036)................................. 1000 (454)
Pentachlorophenol (D037)............................ 10 (4.54)
Pyridine (D038)..................................... 1000 (454)
Selenium (D010)..................................... 10 (4.54)
Silver (D011)....................................... 1 (0.454)
Tetrachloroethylene (D039).......................... 100 (45.4)
Toxaphene (D015).................................... 1 (0.454)
Trichloroethylene (D040)............................ 100 (45.4)
[[Page 329]]
2,4,5-Trichlorophenol (D041)........................ 10 (4.54)
2,4,6-Trichlorophenol (D042)........................ 10 (4.54)
2,4,5-TP (D017)..................................... 100 (45.4)
Vinyl chloride (D043)............................... 1 (0.454)
Uracil mustard.......................................... 10 (4.54)
Uranyl acetate.......................................... 100 (45.4)
Uranyl nitrate.......................................... 100 (45.4)
Urea, N-ethyl-N-nitroso-................................ 1 (0.454)
Urea, N-methyl-N-nitroso-............................... 1 (0.454)
Urethane................................................ 100 (45.4)
Vanadic acid, ammonium salt............................. 1000 (454)
Vanadium oxide V2O5..................................... 1000 (454)
Vanadium pentoxide...................................... 1000 (454)
Vanadyl sulfate......................................... 1000 (454)
Vinyl acetate........................................... 5000 (2270)
Vinyl acetate monomer................................... 5000 (2270)
Vinylamine, N-methyl-N-nitroso-......................... 10 (4.54)
Vinyl bromide........................................... 100 (45.4)
Vinyl chloride.......................................... 1 (0.454)
Vinylidene chloride..................................... 100 (45.4)
Warfarin, & salts....................................... 100 (45.4)
Xylene.................................................. 100 (45.4)
m-Xylene................................................ 1000 (454)
o-Xylene................................................ 1000 (454)
p-Xylene................................................ 100 (45.4)
Xylene (mixed).......................................... 100 (45.4)
Xylenes (isomers and mixture)........................... 100 (45.4)
Xylenol................................................. 1000 (454)
Yohimban-16-carboxylic acid,11,17-dimethoxy-18-[(3,4,5- 5000 (2270)
trimethoxybenzoyl)
oxy]-, methyl ester (3beta,16beta,17alpha,18beta,
20alpha)...............................................
Zinc [cent]............................................. 1000 (454)
Zinc acetate............................................ 1000 (454)
Zinc ammonium chloride.................................. 1000 (454)
Zinc, bis(dimethylcarbamodithioato-S,S')-............... 10 (4.54)
Zinc borate............................................. 1000 (454)
Zinc bromide............................................ 1000 (454)
Zinc carbonate.......................................... 1000 (454)
Zinc chloride........................................... 1000 (454)
Zinc cyanide Zn(CN)2.................................... 10 (4.54)
Zinc fluoride........................................... 1000 (454)
Zinc formate............................................ 1000 (454)
Zinc hydrosulfite....................................... 1000 (454)
Zinc nitrate............................................ 1000 (454)
Zinc phenolsulfonate.................................... 5000 (2270)
Zinc phosphide Zn3P2.................................... 100 (45.4)
Zinc silicofluoride..................................... 5000 (2270)
Zinc sulfate............................................ 1000 (454)
Ziram................................................... 10 (4.54)
Zirconium nitrate....................................... 5000 (2270)
Zirconium potassium fluoride............................ 1000 (454)
Zirconium sulfate....................................... 5000 (2270)
Zirconium tetrachloride................................. 5000 (2270)
F001.................................................... 10 (4.54)
(a) Tetrachloroethylene............................. 100 (45.4)
(b) Trichloroethylene............................... 100 (45.4)
(c) Methylene chloride.............................. 1000 (454)
(d) 1,1,1-Trichloroethane........................... 1000 (454)
(e) Carbon tetrachloride............................ 10 (4.54)
(f) Chlorinated fluorocarbons....................... 5000 (2270)
F002.................................................... 10 (4.54)
(a) Tetrachloroethylene............................. 100 (45.4)
(b) Methylene chloride.............................. 1000 (454)
(c) Trichloroethylene............................... 100 (45.4)
(d) 1,1,1-Trichloroethane........................... 1000 (454)
(e) Chlorobenzene................................... 100 (45.4)
(f) 1,1,2-Trichloro-1,2,2-trifluoroethane........... 5000 (2270)
(g) o-Dichlorobenzene............................... 100 (45.4)
(h) Trichlorofluoromethane.......................... 5000 (2270)
(i) 1,1,2-Trichloroethane........................... 100 (45.4)
F003.................................................... 100 (45.4)
[[Page 330]]
(a) Xylene.......................................... 1000 (454)
(b) Acetone......................................... 5000 (2270)
(c) Ethyl acetate................................... 5000 (2270)
(d) Ethylbenzene.................................... 1000 (454)
(e) Ethyl ether..................................... 100 (45.4)
(f) Methyl isobutyl ketone.......................... 5000 (2270)
(g) n-Butyl alcohol................................. 5000 (2270)
(h) Cyclohexanone................................... 5000 (2270)
(i) Methanol........................................ 5000 (2270)
F004.................................................... 100 (45.4)
(a) Cresols/Cresylic acid........................... 100 (45.4)
(b) Nitrobenzene.................................... 1000 (454)
F005.................................................... 100 (45.4)
(a) Toluene......................................... 1000 (454)
(b) Methyl ethyl ketone............................. 5000 (2270)
(c) Carbon disulfide................................ 100 (45.4)
(d) Isobutanol...................................... 5000 (2270)
(e) Pyridine........................................ 1000 (454)
F006.................................................... 10 (4.54)
F007.................................................... 10 (4.54)
F008.................................................... 10 (4.54)
F009.................................................... 10 (4.54)
F010.................................................... 10 (4.54)
F011.................................................... 10 (4.54)
F012.................................................... 10 (4.54)
F019.................................................... 10 (4.54)
F020.................................................... 1 (0.454)
F021.................................................... 1 (0.454)
F022.................................................... 1 (0.454)
F023.................................................... 1 (0.454)
F024.................................................... 1 (0.454)
F025.................................................... 1 (0.454)
F026.................................................... 1 (0.454)
F027.................................................... 1 (0.454)
F028.................................................... 1 (0.454)
F032.................................................... 1 (0.454)
F034.................................................... 1 (0.454)
F035.................................................... 1 (0.454)
F037.................................................... 1 (0.454)
F038.................................................... 1 (0.454)
F039.................................................... 1 (0.454)
K001.................................................... 1 (0.454)
K002.................................................... 10 (4.54)
K003.................................................... 10 (4.54)
K004.................................................... 10 (4.54)
K005.................................................... 10 (4.54)
K006.................................................... 10 (4.54)
K007.................................................... 10 (4.54)
K008.................................................... 10 (4.54)
K009.................................................... 10 (4.54)
K010.................................................... 10 (4.54)
K011.................................................... 10 (4.54)
K013.................................................... 10 (4.54)
K014.................................................... 5000 (2270)
K015.................................................... 10 (4.54)
K016.................................................... 1 (0.454)
K017.................................................... 10 (4.54)
K018.................................................... 1 (0.454)
K019.................................................... 1 (0.454)
K020.................................................... 1 (0.454)
K021.................................................... 10 (4.54)
K022.................................................... 1 (0.454)
K023.................................................... 5000 (2270)
K024.................................................... 5000 (2270)
K025.................................................... 10 (4.54)
K026.................................................... 1000 (454)
K027.................................................... 10 (4.54)
K028.................................................... 1 (0.454)
K029.................................................... 1 (0.454)
K030.................................................... 1 (0.454)
[[Page 331]]
K031.................................................... 1 (0.454)
K032.................................................... 10 (4.54)
K033.................................................... 10 (4.54)
K034.................................................... 10 (4.54)
K035.................................................... 1 (0.454)
K036.................................................... 1 (0.454)
K037.................................................... 1 (0.454)
K038.................................................... 10 (4.54)
K039.................................................... 10 (4.54)
K040.................................................... 10 (4.54)
K041.................................................... 1 (0.454)
K042.................................................... 10 (4.54)
K043.................................................... 10 (4.54)
K044.................................................... 10 (4.54)
K045.................................................... 10 (4.54)
K046.................................................... 10 (4.54)
K047.................................................... 10 (4.54)
K048.................................................... 10 (4.54)
K049.................................................... 10 (4.54)
K050.................................................... 10 (4.54)
K051.................................................... 10 (4.54)
K052.................................................... 10 (4.54)
K060.................................................... 1 (0.454)
K061.................................................... 10 (4.54)
K062.................................................... 10 (4.54)
K064.................................................... 10 (4.54)
K065.................................................... 10 (4.54)
K066.................................................... 10 (4.54)
K069.................................................... 10 (4.54)
K071.................................................... 1 (0.454)
K073.................................................... 10 (4.54)
K083.................................................... 100 (45.4)
K084.................................................... 1 (0.454)
K085.................................................... 10 (4.54)
K086.................................................... 10 (4.54)
K087.................................................... 100 (45.4)
K088.................................................... 10 (4.54)
K090.................................................... 10 (4.54)
K091.................................................... 10 (4.54)
K093.................................................... 5000 (2270)
K094.................................................... 5000 (2270)
K095.................................................... 100 (45.4)
K096.................................................... 100 (45.4)
K097.................................................... 1 (0.454)
K098.................................................... 1 (0.454)
K099.................................................... 10 (4.54)
K100.................................................... 10 (4.54)
K101.................................................... 1 (0.454)
K102.................................................... 1 (0.454)
K103.................................................... 100 (45.4)
K104.................................................... 10 (4.54)
K105.................................................... 10 (4.54)
K106.................................................... 1 (0.454)
K107.................................................... 10 (4.54)
K108.................................................... 10 (4.54)
K109.................................................... 10 (4.54)
K110.................................................... 10 (4.54)
K111.................................................... 10 (4.54)
K112.................................................... 10 (4.54)
K113.................................................... 10 (4.54)
K114.................................................... 10 (4.54)
K115.................................................... 10 (4.54)
K116.................................................... 10 (4.54)
K117.................................................... 1 (0.454)
K118.................................................... 1 (0.454)
K123.................................................... 10 (4.54)
K124.................................................... 10 (4.54)
K125.................................................... 10 (4.54)
K126.................................................... 10 (4.54)
K131.................................................... 100 (45.4)
[[Page 332]]
K132.................................................... 1000 (454)
K136.................................................... 1 (0.454)
K141.................................................... 1 (0.454)
K142.................................................... 1 (0.454)
K143.................................................... 1 (0.454)
K144.................................................... 1 (0.454)
K145.................................................... 1 (0.454)
K147.................................................... 1 (0.454)
K148.................................................... 1 (0.454)
K149.................................................... 10 (4.54)
K150.................................................... 10 (4.54)
K151.................................................... 10 (4.54)
K156.................................................... 10 (4.54)
K157.................................................... 10 (4.54)
K158.................................................... 10 (4.54)
K159.................................................... 10 (4.54)
K161.................................................... 1 (0.454)
K169.................................................... 10 (4.54)
K170.................................................... 1 (0.454)
K171.................................................... 1 (0.454)
K172.................................................... 1 (0.454)
K174.................................................... 1 (0.454)
K175.................................................... 1 (0.454)
K176.................................................... 1 (0.454)
K177.................................................... 5000 (2270)
K178.................................................... 1000 (454)
K181.................................................... 1 (0.454)
------------------------------------------------------------------------
[cent] The RQ for these hazardous substances is limited to those pieces
of the metal having a diameter smaller than 100 micrometers (0.004
inches).
[cent] The RQ for asbestos is limited to friable forms only.
\@\ Indicates that the name was added by PHMSA because (1) the name is a
synonym for a specific hazardous substance and (2) the name appears in
the Hazardous Materials Table as a proper shipping name.
To provide consistency with EPA regulations, two entries with
different CAS numbers are provided. Refer to the EPA Table 302.4--List
of Hazardous Substances and Reportable Quantities for an explanation
of the two entries.
List of Hazardous Substances and Reportable Quantities
Table 2 to Appendix A--Radionuclides
------------------------------------------------------------------------
(3)--Reportable
(1)--Radionuclide (2)--Atomic Quantity (RQ) Ci
Number (TBq)
------------------------------------------------------------------------
Actinium-224............................. 89 100 (3.7)
Actinium-225............................. 89 1 (.037)
Actinium-226............................. 89 10 (.37)
Actinium-227............................. 89 0.001 (.000037)
Actinium-228............................. 89 10 (.37)
Aluminum-26.............................. 13 10 (.37)
Americium-237............................ 95 1000 (37)
Americium-238............................ 95 100 (3.7)
Americium-239............................ 95 100 (3.7)
Americium-240............................ 95 10 (.37)
Americium-241............................ 95 0.01 (.00037)
Americium-242............................ 95 100 (3.7)
Americium-242m........................... 95 0.01 (.00037)
Americium-243............................ 95 0.01 (.00037)
Americium-244............................ 95 10 (.37)
Americium-244m........................... 95 1000 (37)
Americium-245............................ 95 1000 (37)
Americium-246............................ 95 1000 (37)
Americium-246m........................... 95 1000 (37)
Antimony-115............................. 51 1000 (37)
Antimony-116............................. 51 1000 (37)
Antimony-116m............................ 51 100 (3.7)
Antimony-117............................. 51 1000 (37)
Antimony-118m............................ 51 10 (.37)
Antimony-119............................. 51 1000 (37)
Antimony-120 (16 min).................... 51 1000 (37)
Antimony-120 (5.76 day).................. 51 10 (.37)
Antimony-122............................. 51 10 (.37)
Antimony-124............................. 51 10 (.37)
Antimony-124m............................ 51 1000 (37)
Antimony-125............................. 51 10 (.37)
Antimony-126............................. 51 10 (.37)
Antimony-126m............................ 51 1000 (37)
Antimony-127............................. 51 10 (.37)
Antimony-128 (10.4 min).................. 51 1000 (37)
Antimony-128 (9.01 hr)................... 51 10 (.37)
Antimony-129............................. 51 100 (3.7)
Antimony-130............................. 51 100 (3.7)
Antimony-131............................. 51 1000 (37)
Argon-39................................. 18 1000 (37)
Argon-41................................. 18 10 (.37)
Arsenic-69............................... 33 1000 (37)
Arsenic-70............................... 33 100 (3.7)
Arsenic-71............................... 33 100 (3.7)
Arsenic-72............................... 33 10 (.37)
Arsenic-73............................... 33 100 (3.7)
Arsenic-74............................... 33 10 (.37)
Arsenic-76............................... 33 100 (3.7)
[[Page 333]]
Arsenic-77............................... 33 1000 (37)
Arsenic-78............................... 33 100 (3.7)
Astatine-207............................. 85 100 (3.7)
Astatine-211............................. 85 100 (3.7)
Barium-126............................... 56 1000 (37)
Barium-128............................... 56 10 (.37)
Barium-131............................... 56 10 (.37)
Barium-131m.............................. 56 1000 (37)
Barium-133............................... 56 10 (.37)
Barium-133m.............................. 56 100 (3.7)
Barium-135m.............................. 56 1000 (37)
Barium-139............................... 56 1000 (37)
Barium-140............................... 56 10 (.37)
Barium-141............................... 56 1000 (37)
Barium-142............................... 56 1000 (37)
Berkelium-245............................ 97 100 (3.7)
Berkelium-246............................ 97 10 (.37)
Berkelium-247............................ 97 0.01 (.00037)
Berkelium-249............................ 97 1 (.037)
Berkelium-250............................ 97 100 (3.7)
Beryllium-10............................. 4 1 (.037)
Beryllium-7.............................. 4 100 (3.7)
Bismuth-200.............................. 83 100 (3.7)
Bismuth-201.............................. 83 100 (3.7)
Bismuth-202.............................. 83 1000 (37)
Bismuth-203.............................. 83 10 (.37)
Bismuth-205.............................. 83 10 (.37)
Bismuth-206.............................. 83 10 (.37)
Bismuth-207.............................. 83 10 (.37)
Bismuth-210.............................. 83 10 (.37)
Bismuth-210m............................. 83 0.1 (.0037)
Bismuth-212.............................. 83 100 (3.7)
Bismuth-213.............................. 83 100 (3.7)
Bismuth-214.............................. 83 100 (3.7)
Bromine-74............................... 35 100 (3.7)
Bromine-74m.............................. 35 100 (3.7)
Bromine-75............................... 35 100 (3.7)
Bromine-76............................... 35 10 (.37)
Bromine-77............................... 35 100 (3.7)
Bromine-80............................... 35 1000 (37)
Bromine-80m.............................. 35 1000 (37)
Bromine-82............................... 35 10 (.37)
Bromine-83............................... 35 1000 (37)
Bromine-84............................... 35 100 (3.7)
Cadmium-104.............................. 48 1000 (37)
Cadmium-107.............................. 48 1000 (37)
Cadmium-109.............................. 48 1 (.037)
Cadmium-113.............................. 48 0.1 (.0037)
Cadmium-113m............................. 48 0.1 (.0037)
Cadmium-115.............................. 48 100 (3.7)
Cadmium-115m............................. 48 10 (.37)
Cadmium-117.............................. 48 100 (3.7)
Cadmium-117m............................. 48 10 (.37)
Calcium-41............................... 20 10 (.37)
Calcium-45............................... 20 10 (.37)
Calcium-47............................... 20 10 (.37)
Californium-244.......................... 98 1000 (37)
Californium-246.......................... 98 10 (.37)
Californium-248.......................... 98 0.1 (.0037)
Californium-249.......................... 98 0.01 (.00037)
Californium-250.......................... 98 0.01 (.00037)
Californium-251.......................... 98 0.01 (.00037)
Californium-252.......................... 98 0.1 (.0037)
Californium-253.......................... 98 10 (.37)
Californium-254.......................... 98 0.1 (.0037)
Carbon-11................................ 6 1000 (37)
Carbon-14................................ 6 10 (.37)
Cerium-134............................... 58 10 (.37)
Cerium-135............................... 58 10 (.37)
Cerium-137............................... 58 1000 (37)
Cerium-137m.............................. 58 100 (3.7)
Cerium-139............................... 58 100 (3.7)
Cerium-141............................... 58 10 (.37)
Cerium-143............................... 58 100 (3.7)
Cerium-144............................... 58 1 (.037)
Cesium-125............................... 55 1000 (37)
Cesium-127............................... 55 100 (3.7)
Cesium-129............................... 55 100 (3.7)
Cesium-130............................... 55 1000 (37)
Cesium-131............................... 55 1000 (37)
Cesium-132............................... 55 10 (.37)
Cesium-134............................... 55 1 (.037)
Cesium-134m.............................. 55 1000 (37)
Cesium-135............................... 55 10 (.37)
Cesium-135m.............................. 55 100 (3.7)
Cesium-136............................... 55 10 (.37)
Cesium-137............................... 55 1 (.037)
Cesium-138............................... 55 100 (3.7)
Chlorine-36.............................. 17 10 (.37)
Chlorine-38.............................. 17 100 (3.7)
Chlorine-39.............................. 17 100 (3.7)
Chromium-48.............................. 24 100 (3.7)
Chromium-49.............................. 24 1000 (37)
Chromium-51.............................. 24 1000 (37)
Cobalt-55................................ 27 10 (.37)
Cobalt-56................................ 27 10 (.37)
Cobalt-57................................ 27 100 (3.7)
Cobalt-58................................ 27 10 (.37)
Cobalt-58m............................... 27 1000 (37)
Cobalt-60................................ 27 10 (.37)
Cobalt-60m............................... 27 1000 (37)
Cobalt-61................................ 27 1000 (37)
Cobalt-62m............................... 27 1000 (37)
Copper-60................................ 29 100 (3.7)
Copper-61................................ 29 100 (3.7)
Copper-64................................ 29 1000 (37)
Copper-67................................ 29 100 (3.7)
Curium-238............................... 96 1000 (37)
Curium-240............................... 96 1 (.037)
Curium-241............................... 96 10 (.37)
Curium-242............................... 96 1 (.037)
Curium-243............................... 96 0.01 (.00037)
Curium-244............................... 96 0.01 (.00037)
Curium-245............................... 96 0.01 (.00037)
Curium-246............................... 96 0.01 (.00037)
Curium-247............................... 96 0.01 (.00037)
Curium-248............................... 96 0.001 (.000037)
Curium-249............................... 96 1000 (37)
Dysprosium-155........................... 66 100 (3.7)
Dysprosium-157........................... 66 100 (3.7)
Dysprosium-159........................... 66 100 (3.7)
Dysprosium-165........................... 66 1000 (37)
Dysprosium-166........................... 66 10 (.37)
Einsteinium-250.......................... 99 10 (.37)
Einsteinium-251.......................... 99 1000 (37)
Einsteinium-253.......................... 99 10 (.37)
Einsteinium-254.......................... 99 0.1 (.0037)
Einsteinium-254m......................... 99 1 (.037)
Erbium-161............................... 68 100 (3.7)
Erbium-165............................... 68 1000 (37)
Erbium-169............................... 68 100 (3.7)
Erbium-171............................... 68 100 (3.7)
Erbium-172............................... 68 10 (.37)
Europium-145............................. 63 10 (.37)
Europium-146............................. 63 10 (.37)
Europium-147............................. 63 10 (.37)
[[Page 334]]
Europium-148............................. 63 10 (.37)
Europium-149............................. 63 100 (3.7)
Europium-150 (12.6 hr)................... 63 1000 (37)
Europium-150 (34.2 yr)................... 63 10 (.37)
Europium-152............................. 63 10 (.37)
Europium-152m............................ 63 100 (3.7)
Europium-154............................. 63 10 (.37)
Europium-155............................. 63 10 (.37)
Europium-156............................. 63 10 (.37)
Europium-157............................. 63 10 (.37)
Europium-158............................. 63 1000 (37)
Fermium-252.............................. 100 10 (.37)
Fermium-253.............................. 100 10 (.37)
Fermium-254.............................. 100 100 (3.7)
Fermium-255.............................. 100 100 (3.7)
Fermium-257.............................. 100 1 (.037)
Fluorine-18.............................. 9 1000 (37)
Francium-222............................. 87 100 (3.7)
Francium-223............................. 87 100 (3.7)
Gadolinium-145........................... 64 100 (3.7)
Gadolinium-146........................... 64 10 (.37)
Gadolinium-147........................... 64 10 (.37)
Gadolinium-148........................... 64 0.001 (.000037)
Gadolinium-149........................... 64 100 (3.7)
Gadolinium-151........................... 64 100 (3.7)
Gadolinium-152........................... 64 0.001 (.000037)
Gadolinium-153........................... 64 10 (.37)
Gadolinium-159........................... 64 1000 (37)
Gallium-65............................... 31 1000 (37)
Gallium-66............................... 31 10 (.37)
Gallium-67............................... 31 100 (3.7)
Gallium-68............................... 31 1000 (37)
Gallium-70............................... 31 1000 (37)
Gallium-72............................... 31 10 (.37)
Gallium-73............................... 31 100 (3.7)
Germanium-66............................. 32 100 (3.7)
Germanium-67............................. 32 1000 (37)
Germanium-68............................. 32 10 (.37)
Germanium-69............................. 32 10 (.37)
Germanium-71............................. 32 1000 (37)
Germanium-75............................. 32 1000 (37)
Germanium-77............................. 32 10 (.37)
Germanium-78............................. 32 1000 (37)
Gold-193................................. 79 100 (3.7)
Gold-194................................. 79 10 (.37)
Gold-195................................. 79 100 (3.7)
Gold-198................................. 79 100 (3.7)
Gold-198m................................ 79 10 (.37)
Gold-199................................. 79 100 (3.7)
Gold-200................................. 79 1000 (37)
Gold-200m................................ 79 10 (.37)
Gold-201................................. 79 1000 (37)
Hafnium-170.............................. 72 100 (3.7)
Hafnium-172.............................. 72 1 (.037)
Hafnium-173.............................. 72 100 (3.7)
Hafnium-175.............................. 72 100 (3.7)
Hafnium-177m............................. 72 1000 (37)
Hafnium-178m............................. 72 0.1 (.0037)
Hafnium-179m............................. 72 100 (3.7)
Hafnium-180m............................. 72 100 (3.7)
Hafnium-181.............................. 72 10 (.37)
Hafnium-182.............................. 72 0.1 (.0037)
Hafnium-182m............................. 72 100 (3.7)
Hafnium-183.............................. 72 100 (3.7)
Hafnium-184.............................. 72 100 (3.7)
Holmium-155.............................. 67 1000 (37)
Holmium-157.............................. 67 1000 (37)
Holmium-159.............................. 67 1000 (37)
Holmium-161.............................. 67 1000 (37)
Holmium-162.............................. 67 1000 (37)
Holmium-162m............................. 67 1000 (37)
Holmium-164.............................. 67 1000 (37)
Holmium-164m............................. 67 1000 (37)
Holmium-166.............................. 67 100 (3.7)
Holmium-166m............................. 67 1 (.037)
Holmium-167.............................. 67 100 (3.7)
Hydrogen-3............................... 1 100 (3.7)
Indium-109............................... 49 100 (3.7)
Indium-110 (4.9 hr)...................... 49 10 (.37)
Indium-110 (69.1 min).................... 49 100 (3.7)
Indium-111............................... 49 100 (3.7)
Indium-112............................... 49 1000 (37)
Indium-113m.............................. 49 1000 (37)
Indium-114m.............................. 49 10 (.37)
Indium-115............................... 49 0.1 (.0037)
Indium-115m.............................. 49 100 (3.7)
Indium-116m.............................. 49 100 (3.7)
Indium-117............................... 49 1000 (37)
Indium-117m.............................. 49 100 (3.7)
Indium-119m.............................. 49 1000 (37)
Iodine-120............................... 53 10 (.37)
Iodine-120m.............................. 53 100 (3.7)
Iodine-121............................... 53 100 (3.7)
Iodine-123............................... 53 10 (.37)
Iodine-124............................... 53 0.1 (.0037)
Iodine-125............................... 53 0.01 (.00037)
Iodine-126............................... 53 0.01 (.00037)
Iodine-128............................... 53 1000 (37)
Iodine-129............................... 53 0.001 (.000037)
Iodine-130............................... 53 1 (.037)
Iodine-131............................... 53 0.01 (.00037)
Iodine-132............................... 53 10 (.37)
Iodine-132m.............................. 53 10 (.37)
Iodine-133............................... 53 0.1 (.0037)
Iodine-134............................... 53 100 (3.7)
Iodine-135............................... 53 10 (.37)
Iridium-182.............................. 77 1000 (37)
Iridium-184.............................. 77 100 (3.7)
Iridium-185.............................. 77 100 (3.7)
Iridium-186.............................. 77 10 (.37)
Iridium-187.............................. 77 100 (3.7)
Iridium-188.............................. 77 10 (.37)
Iridium-189.............................. 77 100 (3.7)
Iridium-190.............................. 77 10 (.37)
Iridium-190m............................. 77 1000 (37)
Iridium-192.............................. 77 10 (.37)
Iridium-192m............................. 77 100 (3.7)
Iridium-194.............................. 77 100 (3.7)
Iridium-194m............................. 77 10 (.37)
Iridium-195.............................. 77 1000 (37)
Iridium-195m............................. 77 100 (3.7)
Iron-52.................................. 26 100 (3.7)
Iron-55.................................. 26 100 (3.7)
Iron-59.................................. 26 10 (.37)
Iron-60.................................. 26 0.1 (.0037)
Krypton-74............................... 36 10 (.37)
Krypton-76............................... 36 10 (.37)
Krypton-77............................... 36 10 (.37)
Krypton-79............................... 36 100 (3.7)
Krypton-81............................... 36 1000 (37)
Krypton-83m.............................. 36 1000 (37)
Krypton-85............................... 36 1000 (37)
Krypton-85m.............................. 36 100 (3.7)
Krypton-87............................... 36 10 (.37)
Krypton-88............................... 36 10 (.37)
Lanthanum-131............................ 57 1000 (37)
[[Page 335]]
Lanthanum-132............................ 57 100 (3.7)
Lanthanum-135............................ 57 1000 (37)
Lanthanum-137............................ 57 10 (.37)
Lanthanum-138............................ 57 1 (.037)
Lanthanum-140............................ 57 10 (.37)
Lanthanum-141............................ 57 1000 (37)
Lanthanum-142............................ 57 100 (3.7)
Lanthanum-143............................ 57 1000 (37)
Lead-195m................................ 82 1000 (37)
Lead-198................................. 82 100 (3.7)
Lead-199................................. 82 100 (3.7)
Lead-200................................. 82 100 (3.7)
Lead-201................................. 82 100 (3.7)
Lead-202................................. 82 1 (.037)
Lead-202m................................ 82 10 (.37)
Lead-203................................. 82 100 (3.7)
Lead-205................................. 82 100 (3.7)
Lead-209................................. 82 1000 (37)
Lead-210................................. 82 0.01 (.00037)
Lead-211................................. 82 100 (3.7)
Lead-212................................. 82 10 (.37)
Lead-214................................. 82 100 (3.7)
Lutetium-169............................. 71 10 (.37)
Lutetium-170............................. 71 10 (.37)
Lutetium-171............................. 71 10 (.37)
Lutetium-172............................. 71 10 (.37)
Lutetium-173............................. 71 100 (3.7)
Lutetium-174............................. 71 10 (.37)
Lutetium-174m............................ 71 10 (.37)
Lutetium-176............................. 71 1 (.037)
Lutetium-176m............................ 71 1000 (37)
Lutetium-177............................. 71 100 (3.7)
Lutetium-177m............................ 71 10 (.37)
Lutetium-178............................. 71 1000 (37)
Lutetium-178m............................ 71 1000 (37)
Lutetium-179............................. 71 1000 (37)
Magnesium-28............................. 12 10 (.37)
Manganese-51............................. 25 1000 (37)
Manganese-52............................. 25 10 (.37)
Manganese-52m............................ 25 1000 (37)
Manganese-53............................. 25 1000 (37)
Manganese-54............................. 25 10 (.37)
Manganese-56............................. 25 100 (3.7)
Mendelevium-257.......................... 101 100 (3.7)
Mendelevium-258.......................... 101 1 (.037)
Mercury-193.............................. 80 100 (3.7)
Mercury-193m............................. 80 10 (.37)
Mercury-194.............................. 80 0.1 (.0037)
Mercury-195.............................. 80 100 (3.7)
Mercury-195m............................. 80 100 (3.7)
Mercury-197.............................. 80 1000 (37)
Mercury-197m............................. 80 1000 (37)
Mercury-199m............................. 80 1000 (37)
Mercury-203.............................. 80 10 (.37)
Molybdenum-101........................... 42 1000 (37)
Molybdenum-90............................ 42 100 (3.7)
Molybdenum-93............................ 42 100 (3.7)
Molybdenum-93m........................... 42 10 (.37)
Molybdenum-99............................ 42 100 (3.7)
Neodymium-136............................ 60 1000 (37)
Neodymium-138............................ 60 1000 (37)
Neodymium-139............................ 60 1000 (37)
Neodymium-139m........................... 60 100 (3.7)
Neodymium-141............................ 60 1000 (37)
Neodymium-147............................ 60 10 (.37)
Neodymium-149............................ 60 100 (3.7)
Neodymium-151............................ 60 1000 (37)
Neptunium-232............................ 93 1000 (37)
Neptunium-233............................ 93 1000 (37)
Neptunium-234............................ 93 10 (.37)
Neptunium-235............................ 93 1000 (37)
Neptunium-236 (1.2 E 5 yr)............... 93 0.1 (.0037)
Neptunium-236 (22.5 hr).................. 93 100 (3.7)
Neptunium-237............................ 93 0.01 (.00037)
Neptunium-238............................ 93 10 (.37)
Neptunium-239............................ 93 100 (3.7)
Neptunium-240............................ 93 100 (3.7)
Nickel-56................................ 28 10 (.37)
Nickel-57................................ 28 10 (.37)
Nickel-59................................ 28 100 (3.7)
Nickel-63................................ 28 100 (3.7)
Nickel-65................................ 28 100 (3.7)
Nickel-66................................ 28 10 (.37)
Niobium-88............................... 41 100 (3.7)
Niobium-89 (122 min)..................... 41 100 (3.7)
Niobium-89 (66 min)...................... 41 100 (3.7)
Niobium-90............................... 41 10 (.37)
Niobium-93m.............................. 41 100 (3.7)
Niobium-94............................... 41 10 (.37)
Niobium-95............................... 41 10 (.37)
Niobium-95m.............................. 41 100 (3.7)
Niobium-96............................... 41 10 (.37)
Niobium-97............................... 41 100 (3.7)
Niobium-98............................... 41 1000 (37)
Osmium-180............................... 76 1000 (37)
Osmium-181............................... 76 100 (3.7)
Osmium-182............................... 76 100 (3.7)
Osmium-185............................... 76 10 (.37)
Osmium-189m.............................. 76 1000 (37)
Osmium-191............................... 76 100 (3.7)
Osmium-191m.............................. 76 1000 (37)
Osmium-193............................... 76 100 (3.7)
Osmium-194............................... 76 1 (.037)
Palladium-100............................ 46 100 (3.7)
Palladium-101............................ 46 100 (3.7)
Palladium-103............................ 46 100 (3.7)
Palladium-107............................ 46 100 (3.7)
Palladium-109............................ 46 1000 (37)
Phosphorus-32............................ 15 0.1 (.0037)
Phosphorus-33............................ 15 1 (.037)
Platinum-186............................. 78 100 (3.7)
Platinum-188............................. 78 100 (3.7)
Platinum-189............................. 78 100 (3.7)
Platinum-191............................. 78 100 (3.7)
Platinum-193............................. 78 1000 (37)
Platinum-193m............................ 78 100 (3.7)
Platinum-195m............................ 78 100 (3.7)
Platinum-197............................. 78 1000 (37)
Platinum-197m............................ 78 1000 (37)
Platinum-199............................. 78 1000 (37)
Platinum-200............................. 78 100 (3.7)
Plutonium-234............................ 94 1000 (37)
Plutonium-235............................ 94 1000 (37)
Plutonium-236............................ 94 0.1 (.0037)
Plutonium-237............................ 94 1000 (37)
Plutonium-238............................ 94 0.01 (.00037)
Plutonium-239............................ 94 0.01 (.00037)
Plutonium-240............................ 94 0.01 (.00037)
Plutonium-241............................ 94 1 (.037)
Plutonium-242............................ 94 0.01 (.00037)
Plutonium-243............................ 94 1000 (37)
Plutonium-244............................ 94 0.01 (.00037)
Plutonium-245............................ 94 100 (3.7)
Polonium-203............................. 84 100 (3.7)
Polonium-205............................. 84 100 (3.7)
Polonium-207............................. 84 10 (.37)
[[Page 336]]
Polonium-210............................. 84 0.01 (.00037)
Potassium-40............................. 19 1 (.037)
Potassium-42............................. 19 100 (3.7)
Potassium-43............................. 19 10 (.37)
Potassium-44............................. 19 100 (3.7)
Potassium-45............................. 19 1000 (37)
Praseodymium-136......................... 59 1000 (37)
Praseodymium-137......................... 59 1000 (37)
Praseodymium-138m........................ 59 100 (3.7)
Praseodymium-139......................... 59 1000 (37)
Praseodymium-142......................... 59 100 (3.7)
Praseodymium-142m........................ 59 1000 (37)
Praseodymium-143......................... 59 10 (.37)
Praseodymium-144......................... 59 1000 (37)
Praseodymium-145......................... 59 1000 (37)
Praseodymium-147......................... 59 1000 (37)
Promethium-141........................... 61 1000 (37)
Promethium-143........................... 61 100 (3.7)
Promethium-144........................... 61 10 (.37)
Promethium-145........................... 61 100 (3.7)
Promethium-146........................... 61 10 (.37)
Promethium-147........................... 61 10 (.37)
Promethium-148........................... 61 10 (.37)
Promethium-148m.......................... 61 10 (.37)
Promethium-149........................... 61 100 (3.7)
Promethium-150........................... 61 100 (3.7)
Promethium-151........................... 61 100 (3.7)
Protactinium-227......................... 91 100 (3.7)
Protactinium-228......................... 91 10 (.37)
Protactinium-230......................... 91 10 (.37)
Protactinium-231......................... 91 0.01 (.00037)
Protactinium-232......................... 91 10 (.37)
Protactinium-233......................... 91 100 (3.7)
Protactinium-234......................... 91 10 (.37)
RADIONUCLIDES $[dagger].................. ........... 1 (.037)
Radium-223............................... 88 1 (.037)
Radium-224............................... 88 10 (.37)
Radium-225............................... 88 1 (.037)
Radium-226 **............................ 88 0.1 (.0037)
Radium-227............................... 88 1000 (37)
Radium-228............................... 88 0.1 (.0037)
Radon-220................................ 86 0.1 (.0037)
Radon-222................................ 86 0.1 (.0037)
Rhenium-177.............................. 75 1000 (37)
Rhenium-178.............................. 75 1000 (37)
Rhenium-181.............................. 75 100 (3.7)
Rhenium-182 (12.7 hr).................... 75 10 (.37)
Rhenium-182 (64.0 hr).................... 75 10 (.37)
Rhenium-184.............................. 75 10 (.37)
Rhenium-184m............................. 75 10 (.37)
Rhenium-186.............................. 75 100 (3.7)
Rhenium-186m............................. 75 10 (.37)
Rhenium-187.............................. 75 1000 (37)
Rhenium-188.............................. 75 1000 (37)
Rhenium-188m............................. 75 1000 (37)
Rhenium-189.............................. 75 1000 (37)
Rhodium-100.............................. 45 10 (.37)
Rhodium-101.............................. 45 10 (.37)
Rhodium-101m............................. 45 100 (3.7)
Rhodium-102.............................. 45 10 (.37)
Rhodium-102m............................. 45 10 (.37)
Rhodium-103m............................. 45 1000 (37)
Rhodium-105.............................. 45 100 (3.7)
Rhodium-106m............................. 45 10 (.37)
Rhodium-107.............................. 45 1000 (37)
Rhodium-99............................... 45 10 (.37)
Rhodium-99m.............................. 45 100 (3.7)
Rubidium-79.............................. 37 1000 (37)
Rubidium-81.............................. 37 100 (3.7)
Rubidium-81m............................. 37 1000 (37)
Rubidium-82m............................. 37 10 (.37)
Rubidium-83.............................. 37 10 (.37)
Rubidium-84.............................. 37 10 (.37)
Rubidium-86.............................. 37 10 (.37)
Rubidium-87.............................. 37 10 (.37)
Rubidium-88.............................. 37 1000 (37)
Rubidium-89.............................. 37 1000 (37)
Ruthenium-103............................ 44 10 (.37)
Ruthenium-105............................ 44 100 (3.7)
Ruthenium-106............................ 44 1 (.037)
Ruthenium-94............................. 44 1000 (37)
Ruthenium-97............................. 44 100 (3.7)
Samarium-141............................. 62 1000 (37)
Samarium-141m............................ 62 1000 (37)
Samarium-142............................. 62 1000 (37)
Samarium-145............................. 62 100 (3.7)
Samarium-146............................. 62 0.01 (.00037)
Samarium-147............................. 62 0.01 (.00037)
Samarium-151............................. 62 10 (.37)
Samarium-153............................. 62 100 (3.7)
Samarium-155............................. 62 1000 (37)
Samarium-156............................. 62 100 (3.7)
Scandium-43.............................. 21 1000 (37)
Scandium-44.............................. 21 100 (3.7)
Scandium-44m............................. 21 10 (.37)
Scandium-46.............................. 21 10 (.37)
Scandium-47.............................. 21 100 (3.7)
Scandium-48.............................. 21 10 (.37)
Scandium-49.............................. 21 1000 (37)
Selenium-70.............................. 34 1000 (37)
Selenium-73.............................. 34 10 (.37)
Selenium-73m............................. 34 100 (3.7)
Selenium-75.............................. 34 10 (.37)
Selenium-79.............................. 34 10 (.37)
Selenium-81.............................. 34 1000 (37)
Selenium-81m............................. 34 1000 (37)
Selenium-83.............................. 34 1000 (37)
Silicon-31............................... 14 1000 (37)
Silicon-32............................... 14 1 (.037)
Silver-102............................... 47 100 (3.7)
Silver-103............................... 47 1000 (37)
Silver-104............................... 47 1000 (37)
Silver-104m.............................. 47 1000 (37)
Silver-105............................... 47 10 (.37)
Silver-106............................... 47 1000 (37)
Silver-106m.............................. 47 10 (.37)
Silver-108m.............................. 47 10 (.37)
Silver-110m.............................. 47 10 (.37)
Silver-111............................... 47 10 (.37)
Silver-112............................... 47 100 (3.7)
Silver-115............................... 47 1000 (37)
Sodium-22................................ 11 10 (.37)
Sodium-24................................ 11 10 (.37)
Strontium-80............................. 38 100 (3.7)
Strontium-81............................. 38 1000 (37)
Strontium-83............................. 38 100 (3.7)
Strontium-85............................. 38 10 (.37)
Strontium-85m............................ 38 1000 (37)
Strontium-87m............................ 38 100 (3.7)
Strontium-89............................. 38 10 (.37)
Strontium-90............................. 38 0.1 (.0037)
Strontium-91............................. 38 10 (.37)
Strontium-92............................. 38 100 (3.7)
Sulfur-35................................ 16 1 (.037)
Tantalum-172............................. 73 100 (3.7)
Tantalum-173............................. 73 100 (3.7)
[[Page 337]]
Tantalum-174............................. 73 100 (3.7)
Tantalum-175............................. 73 100 (3.7)
Tantalum-176............................. 73 10 (.37)
Tantalum-177............................. 73 1000 (37)
Tantalum-178............................. 73 1000 (37)
Tantalum-179............................. 73 1000 (37)
Tantalum-180............................. 73 100 (3.7)
Tantalum-180m............................ 73 1000 (37)
Tantalum-182............................. 73 10 (.37)
Tantalum-182m............................ 73 1000 (37)
Tantalum-183............................. 73 100 (3.7)
Tantalum-184............................. 73 10 (.37)
Tantalum-185............................. 73 1000 (37)
Tantalum-186............................. 73 1000 (37)
Technetium-101........................... 43 1000 (37)
Technetium-104........................... 43 1000 (37)
Technetium-93............................ 43 100 (3.7)
Technetium-93m........................... 43 1000 (37)
Technetium-94............................ 43 10 (.37)
Technetium-94m........................... 43 100 (3.7)
Technetium-96............................ 43 10 (.37)
Technetium-96m........................... 43 1000 (37)
Technetium-97............................ 43 100 (3.7)
Technetium-97m........................... 43 100 (3.7)
Technetium-98............................ 43 10 (.37)
Technetium-99............................ 43 10 (.37)
Technetium-99m........................... 43 100 (3.7)
Tellurium-116............................ 52 1000 (37)
Tellurium-121............................ 52 10 (.37)
Tellurium-121m........................... 52 10 (.37)
Tellurium-123............................ 52 10 (.37)
Tellurium-123m........................... 52 10 (.37)
Tellurium-125m........................... 52 10 (.37)
Tellurium-127............................ 52 1000 (37)
Tellurium-127m........................... 52 10 (.37)
Tellurium-129............................ 52 1000 (37)
Tellurium-129m........................... 52 10 (.37)
Tellurium-131............................ 52 1000 (37)
Tellurium-131m........................... 52 10 (.37)
Tellurium-132............................ 52 10 (.37)
Tellurium-133............................ 52 1000 (37)
Tellurium-133m........................... 52 1000 (37)
Tellurium-134............................ 52 1000 (37)
Terbium-147.............................. 65 100 (3.7)
Terbium-149.............................. 65 100 (3.7)
Terbium-150.............................. 65 100 (3.7)
Terbium-151.............................. 65 10 (.37)
Terbium-153.............................. 65 100 (3.7)
Terbium-154.............................. 65 10 (.37)
Terbium-155.............................. 65 100 (3.7)
Terbium-156.............................. 65 10 (.37)
Terbium-156m (24.4 hr)................... 65 1000 (37)
Terbium-156m (5.0 hr).................... 65 1000 (37)
Terbium-157.............................. 65 100 (3.7)
Terbium-158.............................. 65 10 (.37)
Terbium-160.............................. 65 10 (.37)
Terbium-161.............................. 65 100 (3.7)
Thallium-194............................. 81 1000 (37)
Thallium-194m............................ 81 100 (3.7)
Thallium-195............................. 81 100 (3.7)
Thallium-197............................. 81 100 (3.7)
Thallium-198............................. 81 10 (.37)
Thallium-198m............................ 81 100 (3.7)
Thallium-199............................. 81 100 (3.7)
Thallium-200............................. 81 10 (.37)
Thallium-201............................. 81 1000 (37)
Thallium-202............................. 81 10 (.37)
Thallium-204............................. 81 10 (.37)
Thorium (Irradiated)..................... 90 ***
Thorium (Natural)........................ 90 **
Thorium-226.............................. 90 100 (3.7)
Thorium-227.............................. 90 1 (.037)
Thorium-228.............................. 90 0.01 (.00037)
Thorium-229.............................. 90 0.001 (.000037)
Thorium-230.............................. 90 0.01 (.00037)
Thorium-231.............................. 90 100 (3.7)
Thorium-232 **........................... 90 0.001 (.000037)
Thorium-234.............................. 90 100 (3.7)
Thulium-162.............................. 69 1000 (37)
Thulium-166.............................. 69 10 (.37)
Thulium-167.............................. 69 100 (3.7)
Thulium-170.............................. 69 10 (.37)
Thulium-171.............................. 69 100 (3.7)
Thulium-172.............................. 69 100 (3.7)
Thulium-173.............................. 69 100 (3.7)
Thulium-175.............................. 69 1000 (37)
Tin-110.................................. 50 100 (3.7)
Tin-111.................................. 50 1000 (37)
Tin-113.................................. 50 10 (.37)
Tin-117m................................. 50 100 (3.7)
Tin-119m................................. 50 10 (.37)
Tin-121.................................. 50 1000 (37)
Tin-121m................................. 50 10 (.37)
Tin-123.................................. 50 10 (.37)
Tin-123m................................. 50 1000 (37)
Tin-125.................................. 50 10 (.37)
Tin-126.................................. 50 1 (.037)
Tin-127.................................. 50 100 (3.7)
Tin-128.................................. 50 1000 (37)
Titanium-44.............................. 22 1 (.037)
Titanium-45.............................. 22 1000 (37)
Tungsten-176............................. 74 1000 (37)
Tungsten-177............................. 74 100 (3.7)
Tungsten-178............................. 74 100 (3.7)
Tungsten-179............................. 74 1000 (37)
Tungsten-181............................. 74 100 (3.7)
Tungsten-185............................. 74 10 (.37)
Tungsten-187............................. 74 100 (3.7)
Tungsten-188............................. 74 10 (.37)
Uranium (Depleted)....................... 92 ***
Uranium (Irradiated)..................... 92 ***
Uranium (Natural)........................ 92 **
Uranium Enriched 20% or greater.......... 92 ***
Uranium Enriched less than 20%........... 92 ***
Uranium-230.............................. 92 1 (.037)
Uranium-231.............................. 92 1000 (37)
Uranium-232.............................. 92 0.01 (.00037)
Uranium-233.............................. 92 0.1 (.0037)
Uranium-234 **........................... 92 0.1 (.0037)
Uranium-235 **........................... 92 0.1 (.0037)
Uranium-236.............................. 92 0.1 (.0037)
Uranium-237.............................. 92 100 (3.7)
Uranium-238 **........................... 92 0.1 (.0037)
Uranium-239.............................. 92 1000 (37)
Uranium-240.............................. 92 1000 (37)
Vanadium-47.............................. 23 1000 (37)
Vanadium-48.............................. 23 10 (.37)
Vanadium-49.............................. 23 1000 (37)
Xenon-120................................ 54 100 (3.7)
Xenon-121................................ 54 10 (.37)
Xenon-122................................ 54 100 (3.7)
Xenon-123................................ 54 10 (.37)
Xenon-125................................ 54 100 (3.7)
Xenon-127................................ 54 100 (3.7)
[[Page 338]]
Xenon-129m............................... 54 1000 (37)
Xenon-131m............................... 54 1000 (37)
Xenon-133................................ 54 1000 (37)
Xenon-133m............................... 54 1000 (37)
Xenon-135................................ 54 100 (3.7)
Xenon-135m............................... 54 10 (.37)
Xenon-138................................ 54 10 (.37)
Ytterbium-162............................ 70 1000 (37)
Ytterbium-166............................ 70 10 (.37)
Ytterbium-167............................ 70 1000 (37)
Ytterbium-169............................ 70 10 (.37)
Ytterbium-175............................ 70 100 (3.7)
Ytterbium-177............................ 70 1000 (37)
Ytterbium-178............................ 70 1000 (37)
Yttrium-86............................... 39 10 (.37)
Yttrium-86m.............................. 39 1000 (37)
Yttrium-87............................... 39 10 (.37)
Yttrium-88............................... 39 10 (.37)
Yttrium-90............................... 39 10 (.37)
Yttrium-90m.............................. 39 100 (3.7)
Yttrium-91............................... 39 10 (.37)
Yttrium-91m.............................. 39 1000 (37)
Yttrium-92............................... 39 100 (3.7)
Yttrium-93............................... 39 100 (3.7)
Yttrium-94............................... 39 1000 (37)
Yttrium-95............................... 39 1000 (37)
Zinc-62.................................. 30 100 (3.7)
Zinc-63.................................. 30 1000 (37)
Zinc-65.................................. 30 10 (.37)
Zinc-69.................................. 30 1000 (37)
Zinc-69m................................. 30 100 (3.7)
Zinc-71m................................. 30 100 (3.7)
Zinc-72.................................. 30 100 (3.7)
Zirconium-86............................. 40 100 (3.7)
Zirconium-88............................. 40 10 (.37)
Zirconium-89............................. 40 100 (3.7)
Zirconium-93............................. 40 1 (.037)
Zirconium-95............................. 40 10 (.37)
Zirconium-97............................. 40 10 (.37)
------------------------------------------------------------------------
$ The RQs for all radionuclides apply to chemical compounds containing
the radionuclides and elemental forms regardless of the diameter of
pieces of solid material.
[dagger] The RQ of one curie applies to all radionuclides not otherwise
listed. Whenever the RQs in TABLE 1--HAZARDOUS SUBSTANCES OTHER THAN
RADIONUCLIDES and this table conflict, the lowest RQ shall apply. For
example, uranyl acetate and uranyl nitrate have RQs shown in TABLE 1
of 100 pounds, equivalent to about one-tenth the RQ level for uranium-
238 in this table.
** The method to determine the RQs for mixtures or solutions of
radionuclides can be found in paragraph 7 of the note preceding TABLE
1 of this appendix. RQs for the following four common radionuclide
mixtures are provided: radium-226 in secular equilibrium with its
daughters (0.053 curie); natural uranium (0.1 curie); natural uranium
in secular equilibrium with its daughters (0.052 curie); and natural
thorium in secular equilibrium with its daughters (0.011 curie).
*** Indicates that the name was added by PHMSA because it appears in the
list of radionuclides in 49 CFR 173.435. The reportable quantity (RQ),
if not specifically listed elsewhere in this appendix, shall be
determined in accordance with the procedures in paragraph 7 of this
appendix.
Appendix B to Sec. 172.101--List of Marine Pollutants
1. See Sec. 171.4 of this subchapter for applicability to marine
pollutants. This appendix lists potential marine pollutants as defined
in Sec. 171.8 of this subchapter.
2. Marine pollutants listed in this appendix are not necessarily
listed by name in the Sec. 172.101 Table. If a marine pollutant not
listed by name or by synonym in the Sec. 172.101 Table meets the
definition of any hazard Class 1 through 8, then you must determine the
class and division of the material in accordance with Sec. 173.2a of
this subchapter. You must also select the most appropriate hazardous
material description and proper shipping name. If a marine pollutant not
listed by name or by synonym in the Sec. 172.101 Table does not meet
the definition of any Class 1 through 8, then you must offer it for
transportation under the most appropriate of the following two Class 9
entries: ``Environmentally hazardous substances, liquid, n.o.s.,''
UN3082, or ``Environmentally hazardous substances, solid, n.o.s.''
UN3077.
3. This appendix contains two columns. The first column, entitled
``S.M.P.'' (for severe marine pollutants), identifies whether a material
is a severe marine pollutant. If the letters ``PP'' appear in this
column for a material, the material is a severe marine pollutant,
otherwise it is not. The second column, entitled ``Marine Pollutant'' ,
lists the marine pollutants.
4. If a material is not listed in this appendix and meets the
criteria for a marine pollutant as provided in Chapter 2.9 of the IMDG
Code, (incorporated by reference; see Sec. 171.7 of this subchapter),
the material may be transported as a marine pollutant in accordance with
the applicable requirements of this subchapter.
5. If a material or a solution meeting the definition of a marine
pollutant in Sec. 171.8 of this subchapter does not meet the criteria
for a marine pollutant as provided in section 2.9.3.3 and 2.9.3.4 of the
IMDG Code, (incorporated by reference; see Sec. 171.7 of this
subchapter), it may be excepted from the requirements of this subchapter
as a marine pollutant if that exception is approved by the Associate
Administrator.
List of Marine Pollutants
------------------------------------------------------------------------
S.M.P. (1) Marine pollutant (2)
------------------------------------------------------------------------
Acetone cyanohydrin, stabilized
Acetylene tetrabromide
Acetylene tetrachloride
Acraldehyde, inhibited
Acroleic acid, stabilized
Acrolein, inhibited
Acrolein, stabilized
Acrylic acid, stabilized
Acrylic aldehyde, inhibited
Alcohol C-12 - C-16 poly(1-6)
ethoxylate
Alcohol C-6 - C-17 (secondary)poly(3-6)
ethoxylate
Aldicarb
PP Aldrin
Alkyl (c12-c14) dimethylamine
Alkyl (c7-c9) nitrates
Alkybenzenesulphonates, branched and
straight chain (excluding C11-C13
straight chain or branched chain
homologues)
[[Page 339]]
Allyl alcohol
Allyl bromide
ortho-Aminoanisole
Aminobenzene
Aminocarb
Ammonia, anhydrous (I)
Ammonia solution, relative density less
than 0.880 at 15 degrees C in water,
with more than 50 percent ammonia
Ammonia solution relative density less
than 0.880 at 15 degrees C in water,
with more than 35% but not more than
50% ammonia
Ammonia solution, relative density
between 0.880 and 0.957 at 15 degrees
C in water, with more than 10 percent
but not more than 35 percent ammonia,
by mass
Ammonium dinitro-o-cresolate
n-Amylbenzene
Aniline
Aniline oil
PP Azinphos-ethyl
PP Azinphos-methyl
Barium cyanide
Bendiocarb
Benomyl
Benquinox
Benzyl chlorocarbonate
Benzyl chloroformate
PP Binapacryl
N,N-Bis (2-hydroxyethyl) oleamide (LOA)
Bleaching powder
PP Brodifacoum
Bromine cyanide
Bromoacetone
Bromoallylene
Bromobenzene
ortho-Bromobenzyl cyanide
Bromocyane
Bromoform
PP Bromophos-ethyl
3-Bromopropene
Bromoxynil
Butanedione
2-Butenal, stabilized
Butyl benzyl phthalate
Butylbenzenes
N-tert-butyl-N-cyclopropyl-6-methylthio-
1,3,5-triazine-2,4-diamine
2,4-Di-tert-butylphenol
PP 2, 6-Di-tert-Butylphenol
para-tertiary-butyltoluene
PP Cadmium compounds
Cadmium sulphide
Calcium arsenate
Calcium arsenate and calcium arsenite,
mixtures, solid
Calcium cyanide
Calcium hypochlorite, dry with more
than 39% available chlorine (8.8%
available oxygen)
Calcium hypochlorite mixture, dry with
more than 10% but not more than 39%
available chlorine
Calcium hypochlorite mixture, dry with
more than 39% available chlorine (8.8%
available oxygen)
Calcium hypochlorite mixture, dry,
corrosive with more than 10% but not
more than 39% available chlorine
Calcium hypochlorite mixture, dry,
corrosive with more than 39% available
chlorine (8.8% available oxygen)
Calcium hypochlorite, hydrated with not
less than 5.5% but not more than 16%
water
Calcium hypochlorite, hydrated,
corrosive with not less than 5.5% but
not more than 16% water
Calcium hypochlorite, hydrated mixture
with not less than 5.5% but not more
than 16% water
Calcium hypochlorite, hydrated mixture,
corrosive with not less than 5.5% but
not more than 16% water
PP Camphechlor
Carbaryl
Carbendazim
Carbofuran
Carbon tetrabromide
Carbon tetrachloride
PP Carbophenothion
Cartap hydrochloride
PP Chlordane
Chlorfenvinphos
PP Chlorinated paraffins (C-10 - C-13)
PP Chlorinated paraffins (C14-C17), with
more than 1% shorter chain length
Chlorine
Chlorine cyanide, inhibited
Chlormephos
Chloroacetone, stabilized
1-Chloro-2,3-Epoxypropane
2-Chloro-6-nitrotoluene
4-Chloro-2-nitrotoluene
Chloro-ortho-nitrotoluene
2-Chloro-5-trifluoromethylnitrobenzene
para-Chlorobenzyl chloride, liquid or
solid
Chlorodinitrobenzenes, liquid or solid
1-Chloroheptane
1-Chlorohexane
Chloronitroanilines
Chloronitrotoluenes, liquid
Chloronitrotoluenes, solid
1-Chlorooctane
PP Chlorophenolates, liquid
PP Chlorophenolates, solid
Chlorophenyltrichlorosilane
Chloropicrin
alpha-Chloropropylene
ortho-Chlorotoluene
PP Chlorpyriphos
PP Chlorthiophos
Cocculus
Coconitrile
Copper acetoarsenite
Copper arsenite
PP Copper chloride
PP Copper chloride solution
PP Copper cyanide
PP Copper metal powder
PP Copper sulphate, anhydrous, hydrates
Coumachlor
PP Coumaphos
Creosote salts
PP Cresyl diphenyl phosphate
Crotonaldehyde, stabilized
Crotonic aldehyde, stabilized
Crotoxyphos
Cupric arsenite
PP Cupric chloride
PP Cupric cyanide
PP Cupric sulfate
Cupriethylenediamine solution
PP Cuprous chloride
Cyanide mixtures
Cyanide solutions
Cyanides, inorganic, n.o.s.
Cyanogen bromide
[[Page 340]]
Cyanogen chloride, inhibited
Cyanogen chloride, stabilized
Cyanophos
PP 1,5,9-Cyclododecatriene
Cycloheptane
PP Cyhexatin
PP Cymenes (o-;m-;p-)
PP Cypermethrin
Decyl acrylate
PP DDT
Decycloxytetrahydrothiophene dioxide
DEF
Desmedipham
Di-allate
Di-n-Butyl phthalate
PP Dialifos
4,4'-Diaminodiphenylmethane
PP Diazinon
1,3-Dibromobenzene
PP Dichlofenthion
Dichloroanilines
1,3-Dichlorobenzene
1,4-Dichlorobenzene
Dichlorobenzene (meta-; para-)
2,2-Dichlorodiethyl ether
Dichlorodimethyl ether, symmetrical
Di-(2-chloroethyl) ether
1,1-Dichloroethylene, inhibited
1,6-Dichlorohexane
2,4-Dichlorophenol
Dichlorophenyltrichlorosilane
1,3-Dichloropropene
PP Dichlorvos
PP Diclofop-methyl
Dicrotophos
PP Dieldrin
Diisopropylbenzenes
Diisopropylnaphthalenes, mixed isomers
PP Dimethoate
Dimethyl disulphide
PP N,N-Dimethyldodecylamine
Dimethylhydrazine, symmetrical
Dimethylhydrazine, unsymmetrical
Dinitro-o-cresol, solid
Dinitro-o-cresol, solution
Dinitrochlorobenzenes, liquid or solid
Dinitrophenol, dry or wetted with less
than 15 per cent water, by mass
Dinitrophenol solutions
Dinitrophenol, wetted with not less
than 15 per cent water, by mass
Dinitrophenolates alkali metals, dry or
wetted with less than 15 per cent
water, by mass
Dinitrophenolates, wetted with not less
than 15 per cent water, by mass
Dinitrotoluenes, liquid
Dinitrotoluenes, molton
Dintrotoluenes, solid
Dinobuton
Dinoseb
Dinoseb acetate
Dioxacarb
Dioxathion
Dipentene
Diphacinone
Diphenyl
PP Diphenylamine chloroarsine
PP Diphenylchloroarsine, solid or liquid
Disulfoton
1,4-Di-tert-butylbenzene
DNOC
DNOC (pesticide)
Dodecene
Dodecyl diphenyl oxide disulphonate
PP Dodecyl hydroxypropyl sulfide
1-Dodecylamine
PP Dodecylphenol
Drazoxolon
Edifenphos
PP Endosulfan
PP Endrin
Epibromohydrin
Epichlorohydrin
PP EPN
PP Esfenvalerate
PP Ethion
Ethoprophos
Ethyl fluid
Ethyl mercaptan
2-Ethylhexyl nitrate
2-Ethyl-3-propylacrolein
Ethyl tetraphosphate
Ethyldichloroarsine
Ethylene dibromide and methyl bromide
mixtures, liquid
2-Ethylhexaldehyde
Fenamiphos
PP Fenbutatin oxide
PP Fenchlorazole-ethyl
PP Fenitrothion
PP Fenoxapro-ethyl
PP Fenoxaprop-P-ethyl
PP Fenpropathrin
Fensulfothion
PP Fenthion
PP Fentin acetate
PP Fentin hydroxide
Ferric arsenate
Ferric arsenite
Ferrous arsenate
PP Fonofos
Formetanate
PP Furathiocarb (ISO)
PP gamma-BHC
Gasoline, leaded
PP Heptachlor
Heptanes
Heptenophos
n-Heptaldehyde
n-Heptylbenzene
normal-Heptyl chloride
PP Hexachlorobutadiene
PP 1,3-Hexachlorobutadiene
Hexaethyl tetraphosphate liquid
Hexaethyl tetraphosphate, solid
Hexane
normal-Hexyl chloride
n-Hexylbenzene
Hydrocyanic acid, anhydrous,
stabilized, containing less than 3%
water
Hydrocyanic acid, anhydrous,
stabilized, containing less than 3%
water and absorbed in a porous inert
material
Hydrocyanic acid, aqueous solutions not
more than 20% hydrocyanic acid
Hydrogen cyanide solution in alcohol,
with not more than 45% hydrogen
cyanide
Hydrogen cyanide, stabilized with less
than 3% water
Hydrogen cyanide, stabilized with less
than 3% water and absorbed in a porous
inert material
Hydroxydimethylbenzenes, liquid or
solid
[[Page 341]]
Hypochlorite solutions
Ioxynil
Isobenzan
Isobutyl butyrate
Isobutylbenzene
Isodecyl acrylate
Isodecyl diphenyl phosphate
Isofenphos
Isooctane
Isooctyl nitrate
Isoprene, stabilized
Isoprocarb
Isotetramethylbenzene
PP Isoxathion
Lead acetate
Lead arsenates
Lead arsenites
Lead compounds, soluble, n.o.s.
Lead cyanide
Lead nitrate
Lead perchlorate, solid or solution
Lead tetraethyl
Lead tetramethyl
PP Lindane
Linuron
London Purple
Magnesium arsenate
Malathion
Mancozeb (ISO)
Maneb
Maneb preparations with not less than
60% maneb
Maneb preparation, stabilized against
self-heating
Maneb stabilized or Maneb preparations,
stabilized against self-heating
Manganese ethylene-1,2-bis
dithiocarbamate
Manganese ethylene-1,2-bis-
dithiocarbamate, stabilized against
self-heating
Mecarbam
Mephosfolan
Mercaptodimethur
PP Mercuric acetate
PP Mercuric ammonium chloride
PP Mercuric arsenate
PP Mercuric benzoate
PP Mercuric bisulphate
PP Mercuric bromide
PP Mercuric chloride
PP Mercuric cyanide
PP Mercuric gluconate
Mercuric iodide
PP Mercuric nitrate
PP Mercuric oleate
PP Mercuric oxide
PP Mercuric oxycyanide, desensitized
PP Mercuric potassium cyanide
PP Mercuric Sulphate
PP Mercuric thiocyanate
PP Mercurol
PP Mercurous acetate
PP Mercurous bisulphate
PP Mercurous bromide
PP Mercurous chloride
PP Mercurous nitrate
PP Mercurous salicylate
PP Mercurous sulphate
PP Mercury acetates
PP Mercury ammonium chloride
PP Mercury based pesticide, liquid,
flammable, toxic
PP Mercury based pesticides, liquid,
toxic, flammable
PP Mercury based pesticides, liquid, toxic
PP Mercury based pesticides, solid, toxic
PP Mercury benzoate
PP Mercury bichloride
PP Mercury bisulphates
PP Mercury bromides
PP Mercury compounds, liquid, n.o.s.
PP Mercury compounds, solid, n.o.s.
PP Mercury cyanide
PP Mercury gluconate
PP Mercury (I) (mercurous) compounds
(pesticides)
PP Mercury (II) (mercuric) compounds
(pesticides)
Mercury iodide
PP Mercury nucleate
PP Mercury oleate
PP Mercury oxide
PP Mercury oxycyanide, desensitized
PP Mercury potassium cyanide
PP Mercury potassium iodide
PP Mercury salicylate
PP Mercury sulfates
PP Mercury thiocyanate
Mesitylene
Metam-sodium
Methamidophos
Methanethiol
Methidathion
Methomyl
ortho-Methoxyaniline
Methyl bromide and ethylene dibromide
mixtures, liquid
Methyl disulphide
Methyl mercaptan
2-Methyl-2-phenylpropane
3-Methylacroleine, stabilized
N-Methylaniline
Methylchlorobenzenes
Methylcyclohexane
Methyldinitrobenzenes, liquid
Methyldinitrobenzenes, molten
Methyldinitrobenzenes, solid
Methyldithiomethane
2-Methylheptane
Methylnitrophenols
2-Methylpentane
3-Methylpyradine
Methyltrithion
Methylvinylbenzenes, inhibited
PP Mevinphos
Mexacarbate
Mirex
Monocrotophos
Motor fuel anti-knock mixtures
Motor fuel anti-knock mixtures or
compounds
Nabam
Naled
Naphthalene, crude or Naphthalene,
refined
Napthalene, molten
PP Nickel carbonyl
PP Nickel cyanide
PP Nickel tetracarbonyl
3-Nitro-4-chlorobenzotrifluoride
Nitrobenzene
Nitrobenzotrifluorides, liquid or solid
Nonanes
Nonylphenol
normal-Octaldehyde
Octanes
Oleylamine
PP Organotin compounds, liquid, n.o.s.
PP Organotin compounds (pesticides)
PP Organotin compounds, solid, n.o.s.
PP Organotin pesticides, liquid,
flammable, toxic, n.o.s., flash point
less than 23deg C
[[Page 342]]
PP Organotin pesticides, liquid, toxic,
flammable, n.o.s.
PP Organotin pesticides, liquid, toxic,
n.o.s.
PP Organotin pesticides, solid, toxic,
n.o.s.
Orthoarsenic acid
PP Osmium tetroxide
Oxamyl
Oxydisulfoton
Paraoxon
PP Parathion
PP Parathion-methyl
PP PCBs.
Pentachloroethane
PP Pentachlorophenol
Pentalin
n-Pentylbenzene
Perchloroethylene
Perchloromethylmercaptan
Petrol, leaded
PP Phenarsazine chloride
d-Phenothrin
PP Phenthoate
Phenylamine
1-Phenylbutane
2-Phenylbutane
Phenylcyclohexane
PP Phenylmercuric acetate
PP Phenylmercuric compounds, n.o.s.
PP Phenylmercuric hydroxide
PP Phenylmercuric nitrate
PP Phorate
PP Phosalone
Phosmet
PP Phosphamidon
PP Phosphorus, white, molten
PP Phosphorus, white or yellow dry or
under water or in solution
PP Phosphorus white, or yellow, molten
PP Phosphorus, yellow, molten
Pindone (and salts of)
Pine Oil
alpha-Pinene
Pirimicarb
PP Pirimiphos-ethyl
PP Polychlorinated biphenyls
PP Polyhalogenated biphenyls, liquid or
Terphenyls liquid
PP Polyhalogenated biphenyls, solid or
Terphenyls, solid
PP Potassium cuprocyanide
Potassium cyanide, solid
Potassium cyanide, solution
PP Potassium cyanocuprate (I)
PP Potassium cyanomercurate
PP Potassium mercuric iodide
Promecarb
Propachlor
Propaphos
Propenal, inhibited
Propenoic acid, stabilized
Propenyl alcohol
Propoxur
Propylene tetramer
Prothoate
Prussic acid, anhydrous, stabilized
Prussic acid, anhydrous, stabilized,
absorbed in a porous inert material
PP Pyrazophos
Quinalphos
PP Quizalofop
PP Quizalofop-p-ethyl
Rotenone
Salithion
PP Silafluofen
Silver arsenite
Silver cyanide
Silver orthoarsenite
PP Sodium copper cyanide, solid
PP Sodium copper cyanide solution
PP Sodium cuprocyanide, solid
PP Sodium cuprocyanide, solution
Sodium cyanide, solid
Sodium cyanide, solution
Sodium dinitro-o-cresolate, dry or
wetted with less than 15 per cent
water, by mass
Sodium dinitro-ortho-cresolate, wetted
with not less than 15 per cent water,
by mass
Sodium hypochlorite solution
PP Sodium pentachlorophenate
Strychnine or Strychnine salts
Sulfotep
PP Sulprophos
Tallow nitrile
Temephos
TEPP
PP Terbufos
Tetrabromoethane
Tetrabromomethane
1,1,2,2-Tetrachloroethane
Tetrachloroethylene
Tetrachloromethane
Tetraethyl dithiopyrophosphate
PP Tetraethyl lead, liquid
Tetramethrin
Tetramethyllead
Tetrapropylene
Thallium chlorate
Thallium compounds, n.o.s.
Thallium compounds (pesticides)
Thallium nitrate
Thallium sulfate
Thallous chlorate
Thiocarbonyl tetrachloride
Toluidines, liquid
Toluidines, solid
Triaryl phosphates, isopropylated
PP Triaryl phosphates, n.o.s.
Triazophos
Tribromomethane
PP Tributyltin compounds
Trichlorfon
PP 1,2,3--Trichlorobenzene
Trichlorobenzenes, liquid
Trichlorobutene
Trichlorobutylene
Trichloromethane sulphuryl chloride
Trichloromethyl sulphochloride
Trichloronat
Tricresyl phosphate (less than 1% ortho-
isomer)
PP Tricresyl phosphate, not less than 1%
ortho-isomer but not more than 3%
orthoisomer
PP Tricresyl phosphate with more than 3
per cent ortho isomer
Triethylbenzene
Triisopropylated phenyl phosphates
1,3,5-Trimethylbenzene
Trimethylene dichloride
2,2,4-Trimethylpentane
PP Triphenylphosphate
Triphenyl phosphate/tert-butylated
triphenyl phosphates mixtures
containing 5% to 10% triphenyl
phosphates
[[Page 343]]
PP Triphenyl phosphate/tert-butylated
triphenyl phosphates mixtures
containing 10% to 48% triphenyl
phosphates
PP Triphenyltin compounds
Tripropylene
Tritolyl phosphate (less than 1% ortho-
isomer)
PP Tritolyl phosphate (not less than 1%
ortho-isomer)
Trixylenyl phosphate
Turpentine
Vinylidene chloride, stabilized
Warfarin (and salts of)
PP White phosphorus, dry
PP White phosphorus, wet
White spirit, low (15-20%) aromatic
PP Yellow phosphorus, dry
PP Yellow phosphorus, wet
Zinc bromide
Zinc chloride, anhydrous
Zinc chloride solution
Zinc cyanide
------------------------------------------------------------------------
[Amdt. 172-173, 55 FR 52474, Dec. 21, 1990]
Editorial Note: For Federal Register citations affecting Sec.
172.101, see the List of CFR Sections Affected, which appears in the
Finding Aids section of the printed volume and at www.fdsys.gov.
Sec. 172.102 Special provisions.
(a) General. When column 7 of the Sec. 172.101 table refers to a
special provision for a hazardous material, the meaning and requirements
of that provision are as set forth in this section. When a special
provision specifies packaging or packaging requirements--
(1) The special provision is in addition to the standard
requirements for all packagings prescribed in Sec. 173.24 of this
subchapter and any other applicable packaging requirements in subparts A
and B of part 173 of this subchapter; and
(2) To the extent a special provision imposes limitations or
additional requirements on the packaging provisions set forth in column
8 of the Sec. 172.101 table, packagings must conform to the
requirements of the special provision.
(b) Description of codes for special provisions. Special provisions
contain packaging provisions, prohibitions, exceptions from requirements
for particular quantities or forms of materials and requirements or
prohibitions applicable to specific modes of transportation, as follows:
(1) A code consisting only of numbers (for example, ``11'') is
multi-modal in application and may apply to bulk and non-bulk
packagings.
(2) A code containing the letter ``A'' refers to a special provision
which applies only to transportation by aircraft.
(3) A code containing the letter ``B'' refers to a special provision
that applies only to bulk packaging requirements. Unless otherwise
provided in this subchapter, these special provisions do not apply to
UN, IM Specification portable tanks or IBCs.
(4) A code containing the letters ``IB'' or ``IP'' refers to a
special provision that applies only to transportation in IBCs.
(5) A code containing the letter ``N'' refers to a special provision
which applies only to non-bulk packaging requirements.
(6) A code containing the letter ``R'' refers to a special provision
which applies only to transportation by rail.
(7) A code containing the letter ``T'' refers to a special provision
which applies only to transportation in UN or IM Specification portable
tanks.
(8) A code containing the letters ``TP'' refers to a portable tank
special provision for UN or IM Specification portable tanks that is in
addition to those provided by the portable tank instructions or the
requirements in part 178 of this subchapter.
(9) A code containing the letter ``W'' refers to a special provision
that applies only to transportation by water.
(c) Tables of special provisions. The following tables list, and set
forth the requirements of, the special provisions referred to in column
7 of the Sec. 172.101 table.
(1) Numeric provisions. These provisions are multi-modal and apply
to bulk and non-bulk packagings:
Code/Special Provisions
1 This material is poisonous by inhalation (see Sec. 171.8 of this
subchapter) in Hazard Zone A (see Sec. 173.116(a) or Sec. 173.133(a)
of this subchapter), and must be described as an inhalation hazard under
the provisions of this subchapter.
2 This material is poisonous by inhalation (see Sec. 171.8 of this
subchapter) in Hazard Zone B (see Sec. 173.116(a) or Sec. 173.133(a)
of this subchapter), and must be described as an
[[Page 344]]
inhalation hazard under the provisions of this subchapter.
3 This material is poisonous by inhalation (see Sec. 171.8 of this
subchapter) in Hazard Zone C (see Sec. 173.116(a) of this subchapter),
and must be described as an inhalation hazard under the provisions of
this subchapter.
4 This material is poisonous by inhalation (see Sec. 171.8 of this
subchapter) in Hazard Zone D (see Sec. 173.116(a) of this subchapter),
and must be described as an inhalation hazard under the provisions of
this subchapter.
5 If this material meets the definition for a material poisonous by
inhalation (see Sec. 171.8 of this subchapter), a shipping name must be
selected which identifies the inhalation hazard, in Division 2.3 or
Division 6.1, as appropriate.
6 This material is poisonous-by-inhalation and must be described as an
inhalation hazard under the provisions of this subchapter.
8 A hazardous substance that is not a hazardous waste may be shipped
under the shipping description ``Other regulated substances, liquid or
solid, n.o.s.'', as appropriate. In addition, for solid materials,
special provision B54 applies.
9 Packaging for certain PCBs for disposal and storage is prescribed by
EPA in 40 CFR 761.60 and 761.65.
11 The hazardous material must be packaged as either a liquid or a
solid, as appropriate, depending on its physical form at 55 [deg]C (131
[deg]F) at atmospheric pressure.
12 In concentrations greater than 40 percent, this material has strong
oxidizing properties and is capable of starting fires in contact with
combustible materials. If appropriate, a package containing this
material must conform to the additional labeling requirements of Sec.
172.402 of this subchapter.
13 The words ``Inhalation Hazard'' shall be entered on each shipping
paper in association with the shipping description, shall be marked on
each non-bulk package in association with the proper shipping name and
identification number, and shall be marked on two opposing sides of each
bulk package. Size of marking on bulk package must conform to Sec.
172.302(b) of this subchapter. The requirements of Sec. Sec. 172.203(m)
and 172.505 of this subchapter do not apply.
14 Motor fuel antiknock mixtures are:
a. Mixtures of one or more organic lead mixtures (such as tetraethyl
lead, triethylmethyl lead, diethyldimethyl lead, ethyltrimethyl lead,
and tetramethyl lead) with one or more halogen compounds (such as
ethylene dibromide and ethylene dichloride), hydrocarbon solvents or
other equally efficient stabilizers; or
b. tetraethyl lead.
15 This entry applies to ``Chemical kits'' and ``First aid kits''
containing one or more compatible items of hazardous materials in boxes,
cases, etc. that, for example, are used for medical, analytical,
diagnostic, testing, or repair purposes. Kits that are carried on board
transport vehicles for first aid or operating purposes are not subject
to the requirements of this subchapter.
16 This description applies to smokeless powder and other solid
propellants that are used as powder for small arms and have been classed
as Division 1.3C, 1.4C and Division 4.1 in accordance with Sec. 173.56
of this subchapter.
19 For domestic transportation only, the identification number
``UN1075'' may be used in place of the identification number specified
in column (4) of the Sec. 172.101 table. The identification number used
must be consistent on package markings, shipping papers and emergency
response information.
21 This material must be stabilized by appropriate means (e.g., addition
of chemical inhibitor, purging to remove oxygen) to prevent dangerous
polymerization (see Sec. 173.21(f) of this subchapter).
22 If the hazardous material is in dispersion in organic liquid, the
organic liquid must have a flash point above 50 [deg]C (122 [deg]F).
23 This material may be transported under the provisions of Division 4.1
only if it is so packed that the percentage of diluent will not fall
below that stated in the shipping description at any time during
transport. Quantities of not more than 500 g per package with not less
than 10 percent water by mass may also be classed in Division 4.1,
provided a negative test result is obtained when tested in accordance
with test series 6(c) of the UN Manual of Tests and Criteria (IBR, see
Sec. 171.7 of this subchapter).
24 Alcoholic beverages containing more than 70 percent alcohol by volume
must be transported as materials in Packing Group II. Alcoholic
beverages containing more than 24 percent but not more than 70 percent
alcohol by volume must be transported as materials in Packing Group III.
26 This entry does not include ammonium permanganate, the transport of
which is prohibited except when approved by the Associate Administrator.
28 The dihydrated sodium salt of dichloroisocyanuric acid does not meet
the criteria for inclusion in Division 5.1 (Oxidizer) and is not subject
to the requirements of this subchapter unless meeting the criteria for
inclusion in another class or division.
30 Sulfur is not subject to the requirements of this subchapter if
transported in a non-bulk packaging or if formed to a specific shape
(for example, prills, granules, pellets, pastilles, or flakes). A bulk
packaging
[[Page 345]]
containing sulfur is not subject to the placarding requirements of
subpart F of this part, if it is marked with the appropriate
identification number as required by subpart D of this part. Molten
sulfur must be marked as required by Sec. 172.325 of this subchapter.
31 Materials which have undergone sufficient heat treatment to render
them non-hazardous are not subject to the requirements of this
subchapter.
32 Polymeric beads and molding compounds may be made from polystyrene,
poly(methyl methacrylate) or other polymeric material.
33 Ammonium nitrites and mixtures of an inorganic nitrite with an
ammonium salt are prohibited.
34 The commercial grade of calcium nitrate fertilizer, when consisting
mainly of a double salt (calcium nitrate and ammonium nitrate)
containing not more than 10 percent ammonium nitrate and at least 12
percent water of crystallization, is not subject to the requirements of
this subchapter.
35 Antimony sulphides and oxides which do not contain more than 0.5
percent of arsenic calculated on the total mass do not meet the
definition of Division 6.1.
37 Unless it can be demonstrated by testing that the sensitivity of the
substance in its frozen state is no greater than in its liquid state,
the substance must remain liquid during normal transport conditions. It
must not freeze at temperatures above -15 [deg]C (5 [deg]F).
38 If this material shows a violent effect in laboratory tests involving
heating under confinement, the labeling requirements of Special
Provision 53 apply, and the material must be packaged in accordance with
packing method OP6 in Sec. 173.225 of this subchapter. If the SADT of
the technically pure substance is higher than 75 [deg]C, the technically
pure substance and formulations derived from it are not self-reactive
materials and, if not meeting any other hazard class, are not subject to
the requirements of this subchapter.
39 This substance may be carried under provisions other than those of
Class 1 only if it is so packed that the percentage of water will not
fall below that stated at any time during transport. When phlegmatized
with water and inorganic inert material, the content of urea nitrate
must not exceed 75 percent by mass and the mixture should not be capable
of being detonated by test 1(a)(i) or test 1(a)(ii) in the UN Manual of
Tests and Criteria (IBR, see Sec. 171.7 of this subchapter).
40 Polyester resin kits consist of two components: A base material
(either Class 3 or Division 4.1, Packing Group II or III) and an
activator (organic peroxide), each separately packed in an inner
packaging. The organic peroxide must be type D, E, or F, not requiring
temperature control. The components may be placed in the same outer
packaging provided they will not interact dangerously in the event of
leakage. The Packing Group assigned will be II or III, according to the
classification criteria for either Class 3 or Division 4.1, as
appropriate, applied to the base material. Additionally, unless
otherwise excepted in this subchapter, polyester resin kits must be
packaged in specification combination packagings based on the
performance level of the base material contained within the kit.
41 This material at the Packing Group II hazard criteria level may be
transported in Large Packagings.
43 The membrane filters, including paper separators and coating or
backing materials, that are present in transport, must not be able to
propagate a detonation as tested by one of the tests described in the UN
Manual of Tests and Criteria, Part I, Test series 1(a) (IBR, see Sec.
171.7 of this subchapter). On the basis of the results of suitable
burning rate tests, and taking into account the standard tests in the UN
Manual of Tests and Criteria, Part III, subsection 33.2.1 (IBR, see
Sec. 171.7 of this subchapter), nitrocellulose membrane filters in the
form in which they are to be transported that do not meet the criteria
for a Division 4.1 material are not subject to the requirements of this
subchapter. Packagings must be so constructed that explosion is not
possible by reason of increased internal pressure. Nitrocellulose
membrane filters covered by this entry, each with a mass not exceeding
0.5 g, are not subject to the requirements of this subchapter when
contained individually in an article or a sealed packet.
44 The formulation must be prepared so that it remains homogenous and
does not separate during transport. Formulations with low nitrocellulose
contents and neither showing dangerous properties when tested for their
ability to detonate, deflagrate or explode when heated under defined
confinement by the appropriate test methods and criteria in the UN
Manual of Tests and Criteria (IBR, see Sec. 171.7 of this subchapter),
nor classed as a Division 4.1 (flammable solid) when tested in
accordance with the procedures specified in Sec. 173.124 of this
subchapter (chips, if necessary, crushed and sieved to a particle size
of less than 1.25 mm), are not subject to the requirements of this
subchapter.
45 Temperature should be maintained between 18 [deg]C (64.4 [deg]F) and
40 [deg]C (104 [deg]F). Tanks containing solidified methacrylic acid
must not be reheated during transport.
46 This material must be packed in accordance with packing method OP6
(see Sec. 173.225 of this subchapter). During transport, it
[[Page 346]]
must be protected from direct sunshine and stored (or kept) in a cool
and well-ventilated place, away from all sources of heat.
47 Mixtures of solids that are not subject to this subchapter and
flammable liquids may be transported under this entry without first
applying the classification criteria of Division 4.1, provided there is
no free liquid visible at the time the material is loaded or at the time
the packaging or transport unit is closed. Except when the liquids are
fully absorbed in solid material contained in sealed bags, for single
packagings, each packaging must correspond to a design type that has
passed a leakproofness test at the Packing Group II level. Small inner
packagings consisting of sealed packets and articles containing less
than 10 mL of a Class 3 liquid in Packing Group II or III absorbed onto
a solid material are not subject to this subchapter provided there is no
free liquid in the packet or article.
48 Mixtures of solids that are not subject to this subchapter and toxic
liquids may be transported under this entry without first applying the
classification criteria of Division 6.1, provided there is no free
liquid visible at the time the material is loaded or at the time the
packaging or transport unit is closed. For single packagings, each
packaging must correspond to a design type that has passed a
leakproofness test at the Packing Group II level. This entry may not be
used for solids containing a Packing Group I liquid.
49 Mixtures of solids that are not subject to this subchapter and
corrosive liquids may be transported under this entry without first
applying the classification criteria of Class 8, provided there is no
free liquid visible at the time the material is loaded or at the time
the packaging or transport unit is closed. For single packagings, each
packaging must correspond to a design type that has passed a
leakproofness test at the Packing Group II level.
50 Cases, cartridge, empty with primer which are made of metallic or
plastic casings and meeting the classification criteria of Division 1.4
are not regulated for domestic transportation.
51 This description applies to items previously described as ``Toy
propellant devices, Class C'' and includes reloadable kits. Model rocket
motors containing 30 grams or less propellant are classed as Division
1.4S and items containing more than 30 grams of propellant but not more
than 62.5 grams of propellant are classed as Division 1.4C.
52 This entry may only be used for substances that are too insensitive
for acceptance into Class 1 (explosive) when tested in accordance with
Test Series 2 in the UN Manual of Tests and Criteria, Part I
(incorporated by reference; see Sec. 171.7 of this subchapter).
53 Packages of these materials must bear the subsidiary risk label,
``EXPLOSIVE'', and the subsidiary hazard class/division must be entered
in parentheses immediately following the primary hazard class in the
shipping description, unless otherwise provided in this subchapter or
through an approval issued by the Associate Administrator, or the
competent authority of the country of origin. A copy of the approval
shall accompany the shipping papers.
54 Maneb or maneb preparations not meeting the definition of Division
4.3 or any other hazard class are not subject to the requirements of
this subchapter when transported by motor vehicle, rail car, or
aircraft.
55 This device must be approved in accordance with Sec. 173.56 of this
subchapter by the Associate Administrator.
56 A means to interrupt and prevent detonation of the detonator from
initiating the detonating cord must be installed between each electric
detonator and the detonating cord ends of the jet perforating guns
before the charged jet perforating guns are offered for transportation.
57 Maneb or Maneb preparations stabilized against self-heating need not
be classified in Division 4.2 when it can be demonstrated by testing
that a volume of 1 m\3\ of substance does not self-ignite and that the
temperature at the center of the sample does not exceed 200 [deg]C, when
the sample is maintained at a temperature of not less than 75 [deg]C
2 [deg]C for a period of 24 hours, in accordance
with procedures set forth for testing self-heating materials in the UN
Manual of Tests and Criteria (IBR, see Sec. 171.7 of this subchapter).
58 Aqueous solutions of Division 5.1 inorganic solid nitrate substances
are considered as not meeting the criteria of Division 5.1 if the
concentration of the substances in solution at the minimum temperature
encountered in transport is not greater than 80% of the saturation
limit.
59 Ferrocerium, stabilized against corrosion, with a minimum iron
content of 10 percent is not subject to the requirements of this
subchapter.
61 A chemical oxygen generator is spent if its means of ignition and all
or a part of its chemical contents have been expended.
62 Oxygen generators (see Sec. 171.8 of this subchapter) are not
authorized for transportation under this entry.
64 The group of alkali metals includes lithium, sodium, potassium,
rubidium, and caesium.
65 The group of alkaline earth metals includes magnesium, calcium,
strontium, and barium.
[[Page 347]]
66 Formulations of these substances containing not less than 30 percent
non-volatile, non-flammable phlegmatizer are not subject to this
subchapter.
70 Black powder that has been classed in accordance with the
requirements of Sec. 173.56 of this subchapter may be reclassed and
offered for domestic transportation as a Division 4.1 material if it is
offered for transportation and transported in accordance with the
limitations and packaging requirements of Sec. 173.170 of this
subchapter.
74 During transport, this material must be protected from direct
sunshine and stored or kept in a cool and well-ventilated place, away
from all sources of heat.
78 This entry may not be used to describe compressed air which contains
more than 23.5 percent oxygen. Compressed air containing greater than
23.5 percent oxygen must be shipped using the description ``Compressed
gas, oxidizing, n.o.s., UN3156.''
79 This entry may not be used for mixtures that meet the definition for
oxidizing gas.
81 Polychlorinated biphenyl items, as defined in 40 CFR 761.3, for which
specification packagings are impractical, may be packaged in non-
specification packagings meeting the general packaging requirements of
subparts A and B of part 173 of this subchapter. Alternatively, the item
itself may be used as a packaging if it meets the general packaging
requirements of subparts A and B of part 173 of this subchapter.
101 The name of the particular substance or article must be specified.
102 The ends of the detonating cord must be tied fast so that the
explosive cannot escape. The articles may be transported as in Division
1.4 Compatibility Group D (1.4D) if all of the conditions specified in
Sec. 173.63(a) of this subchapter are met.
103 Detonators which will not mass detonate and undergo only limited
propagation in the shipping package may be assigned to 1.4B
classification code. Mass detonate means that more than 90 percent of
the devices tested in a package explode practically simultaneously.
Limited propagation means that if one detonator near the center of a
shipping package is exploded, the aggregate weight of explosives,
excluding ignition and delay charges, in this and all additional
detonators in the outside packaging that explode may not exceed 25
grams.
105 The word ``Agents'' may be used instead of ``Explosives'' when
approved by the Associate Administrator.
106 The recognized name of the particular explosive may be specified in
addition to the type.
107 The classification of the substance is expected to vary especially
with the particle size and packaging but the border lines have not been
experimentally determined; appropriate classifications should be
verified following the test procedures in Sec. Sec. 173.57 and 173.58
of this subchapter.
108 Fireworks must be so constructed and packaged that loose pyrotechnic
composition will not be present in packages during transportation.
109 Rocket motors must be nonpropulsive in transportation unless
approved in accordance with Sec. 173.56 of this subchapter. A rocket
motor to be considered ``nonpropulsive'' must be capable of unrestrained
burning and must not appreciably move in any direction when ignited by
any means.
110 Fire extinguishers transported under UN1044 and oxygen cylinders
transported for emergency use under UN1072 may include installed
actuating cartridges (cartridges, power device of Division 1.4C or
1.4S), without changing the classification of Division 2.2, provided the
aggregate quantity of deflagrating (propellant) explosives does not
exceed 3.2 grams per cylinder. Oxygen cylinders with installed actuating
cartridges as prepared for transportation must have an effective means
of preventing inadvertent activation.
111 Explosive substances of Division 1.1 Compatibility Group A (1.1A)
are forbidden for transportation if dry or not desensitized, unless
incorporated in a device.
113 The sample must be given a tentative approval by an agency or
laboratory in accordance with Sec. 173.56 of this subchapter.
114 Jet perforating guns, charged, oil well, without detonator may be
reclassed to Division 1.4 Compatibility Group D (1.4D) if the following
conditions are met:
a. The total weight of the explosive contents of the shaped charges
assembled in the guns does not exceed 90.5 kg (200 pounds) per vehicle;
and
b. The guns are packaged in accordance with Packing Method US 1 as
specified in Sec. 173.62 of this subchapter.
115 Boosters with detonator, detonator assemblies and boosters with
detonators in which the total explosive charge per unit does not exceed
25 g, and which will not mass detonate and undergo only limited
propagation in the shipping package may be assigned to 1.4B
classification code. Mass detonate means more than 90 percent of the
devices tested in a package explode practically simultaneously. Limited
propagation means that if one booster near the center of the package is
exploded, the aggregate weight of explosives, excluding ignition and
delay charges, in this and all additional boosters in the outside
packaging that explode may not exceed 25 g.
116 Fuzes, detonating may be classed in Division 1.4 if the fuzes do not
contain more than 25 g of explosive per fuze and are made and packaged
so that they will not cause functioning of other fuzes, explosives
[[Page 348]]
or other explosive devices if one of the fuzes detonates in a shipping
packaging or in adjacent packages.
117 If shipment of the explosive substance is to take place at a time
that freezing weather is anticipated, the water contained in the
explosive substance must be mixed with denatured alcohol so that
freezing will not occur.
118 This substance may not be transported under the provisions of
Division 4.1 unless specifically authorized by the Associate
Administrator (see UN0143 or UN0150 as appropriate).
119 This substance, when in quantities of not more than 11.5 kg (25.3
pounds), with not less than 10 percent water, by mass, also may be
classed as Division 4.1, provided a negative test result is obtained
when tested in accordance with test series 6(c) of the UN Manual of
Tests and Criteria (IBR, see Sec. 171.7 of this subchapter).
120 The phlegmatized substance must be significantly less sensitive than
dry PETN.
121 This substance, when containing less alcohol, water or phlegmatizer
than specified, may not be transported unless approved by the Associate
Administrator.
123 Any explosives, blasting, type C containing chlorates must be
segregated from explosives containing ammonium nitrate or other ammonium
salts.
125 Lactose or glucose or similar materials may be used as a
phlegmatizer provided that the substance contains not less than 90%, by
mass, of phlegmatizer. These mixtures may be classified in Division 4.1
when tested in accordance with test series 6(c) of the UN Manual of
Tests and Criteria (IBR, see Sec. 171.7 of this subchapter) and
approved by the Associate Administrator. Testing must be conducted on at
least three packages as prepared for transport. Mixtures containing at
least 98%, by mass, of phlegmatizer are not subject to the requirements
of this subchapter. Packages containing mixtures with not less than 90%
by mass, of phlegmatizer need not bear a POISON subsidiary risk label.
127 Mixtures containing oxidizing and organic materials transported
under this entry may not meet the definition and criteria of a Class 1
material. (See Sec. 173.50 of this subchapter.)
128 Regardless of the provisions of Sec. 172.101(c)(12), aluminum
smelting by-products and aluminum remelting by-products described under
this entry, meeting the definition of Class 8, Packing Group II and III
may be classed as a Division 4.3 material and transported under this
entry. The presence of a Class 8 hazard must be communicated as required
by this part for subsidiary hazards.
129 These materials may not be classified and transported unless
authorized by the Associate Administrator on the basis of results from
Series 2 Test and a Series 6(c) Test from the UN Manual of Tests and
Criteria (IBR, see Sec. 171.7 of this subchapter) on packages as
prepared for transport. The packing group assignment and packaging must
be approved by the Associate Administrator for Hazardous Materials
Safety on the basis of the criteria in Sec. 173.21 of this subchapter
and the package type used for the Series 6(c) test.
130 ``Batteries, dry, sealed, n.o.s.,'' commonly referred to as dry
batteries, are hermetically sealed and generally utilize metals (other
than lead) and/or carbon as electrodes. These batteries are typically
used for portable power applications. The rechargeable (and some non-
rechargeable) types have gelled alkaline electrolytes (rather than
acidic) making it difficult for them to generate hydrogen or oxygen when
overcharged and therefore, differentiating them from non-spillable
batteries. Dry batteries specifically covered by another entry in the
Sec. 172.101 Table must be transported in accordance with the
requirements applicable to that entry. For example, nickel-metal hydride
batteries transported by vessel in certain quantities are covered by
another entry (see Batteries, nickel-metal hydride, UN3496). Dry
batteries not specifically covered by another entry in the Sec. 172.101
Table are covered by this entry (i.e., Batteries, dry, sealed, n.o.s.)
and are not subject to requirements of this subchapter except for the
following:
(a) Incident reporting. For transportation by aircraft, a telephone
report in accordance with Sec. 171.15(a) is required if a fire, violent
rupture, explosion or dangerous evolution of heat (i.e., an amount of
heat sufficient to be dangerous to packaging or personal safety to
include charring of packaging, melting of packaging, scorching of
packaging, or other evidence) occurs as a direct result of a dry
battery. For all modes of transportation, a written report submitted,
retained, and updated in accordance with Sec. 171.16 is required if a
fire, violent rupture, explosion or dangerous evolution of heat occurs
as a direct result of a dry battery or battery-powered device.
(b) Preparation for transport. Batteries and battery-powered
device(s) containing batteries must be prepared and packaged for
transport in a manner to prevent:
(1) A dangerous evolution of heat;
(2) Short circuits, including but not limited to the following
methods:
(i) Packaging each battery or each battery-powered device when
practicable, in fully enclosed inner packagings made of non-conductive
material;
(ii) Separating or packaging batteries in a manner to prevent
contact with other batteries, devices or conductive materials (e.g.,
metal) in the packagings; or
[[Page 349]]
(iii) Ensuring exposed terminals or connectors are protected with
non-conductive caps, non-conductive tape, or by other appropriate means;
and
(3) Damage to terminals. If not impact resistant, the outer
packaging should not be used as the sole means of protecting the battery
terminals from damage or short circuiting. Batteries must be securely
cushioned and packed to prevent shifting which could loosen terminal
caps or reorient the terminals to produce short circuits. Batteries
contained in devices must be securely installed. Terminal protection
methods include but are not limited to the following:
(i) Securely attaching covers of sufficient strength to protect the
terminals;
(ii) Packaging the battery in a rigid plastic packaging; or
(iii) Constructing the battery with terminals that are recessed or
otherwise protected so that the terminals will not be subjected to
damage if the package is dropped.
(c) Additional air transport requirements. For a battery whose
voltage (electrical potential) exceeds 9 volts--
(1) When contained in a device, the device must be packaged in a
manner that prevents unintentional activation or must have an
independent means of preventing unintentional activation (e.g.,
packaging restricts access to activation switch, switch caps or locks,
recessed switches, trigger locks, temperature sensitive circuit
breakers, etc.); and
(2) An indication of compliance with this special provision must be
provided by marking each package with the words ``not restricted'' or by
including the words ``not restricted'' on a transport document such as
an air waybill accompanying the shipment.
(d) Used or spent battery exception. Used or spent dry batteries of
both non-rechargeable and rechargeable designs, with a marked rating up
to 9-volt that are combined in the same package and transported by
highway or rail for recycling, reconditioning, or disposal are not
subject to this special provision or any other requirement of the HMR.
Note that batteries utilizing different chemistries (i.e., those battery
chemistries specifically covered by another entry in the Sec. 172.101
Table) as well as dry batteries with a marked rating greater than 9-volt
may not be combined with used or spent batteries in the same package.
Note also that this exception does not apply to batteries that have been
reconditioned for reuse.
131 This material may not be offered for transportation unless approved
by the Associate Administrator.
132 This entry may only be used for uniform, ammonium nitrate based
fertilizer mixtures, containing nitrogen, phosphate or potash, meeting
the following criteria: (1) Contains not more than 70% ammonium nitrate
and not more than 0.4% total combustible, organic material calculated as
carbon or (2) Contains not more than 45% ammonium nitrate and
unrestricted combustible material.
134 This entry only applies to vehicles powered by wet batteries, sodium
batteries, lithium metal batteries or lithium ion batteries and
equipment powered by wet batteries or sodium batteries that are
transported with these batteries installed.
a. For the purpose of this special provision, vehicles are self-
propelled apparatus designed to carry one or more persons or goods.
Examples of such vehicles are electrically-powered cars, motorcycles,
scooters, three- and four-wheeled vehicles or motorcycles, trucks,
locomotives, bicycles (pedal cycles with an electric motor) and other
vehicles of this type (e.g. self-balancing vehicles or vehicles not
equipped with at least one seating position), lawn tractors, self-
propelled farming and construction equipment, boats, aircraft,
wheelchairs and other mobility aids. This includes vehicles transported
in a packaging. In this case some parts of the vehicle may be detached
from its frame to fit into the packaging.
b. Examples of equipment are lawnmowers, cleaning machines or model
boats and model aircraft. Equipment powered by lithium metal batteries
or lithium ion batteries must be consigned under the entries ``Lithium
metal batteries contained in equipment'' or ``Lithium metal batteries
packed with equipment'' or ``Lithium ion batteries contained in
equipment'' or ``Lithium ion batteries packed with equipment'' as
appropriate.
c. Self-propelled vehicles or equipment that also contain an
internal combustion engine must be consigned under the entries ``Engine,
internal combustion, flammable gas powered'' or ``Engine, internal
combustion, flammable liquid powered'' or ``Vehicle, flammable gas
powered'' or ``Vehicle, flammable liquid powered,'' as appropriate.
These entries include hybrid electric vehicles powered by both an
internal combustion engine and batteries. Additionally, self-propelled
vehicles or equipment that contain a fuel cell engine must be consigned
under the entries ``Engine, fuel cell, flammable gas powered'' or
``Engine, fuel cell, flammable liquid powered'' or ``Vehicle, fuel cell,
flammable gas powered'' or ``Vehicle, fuel cell, flammable liquid
powered,'' as appropriate. These entries include hybrid electric
vehicles powered
[[Page 350]]
by a fuel cell engine, an internal combustion engine, and batteries.
135 Internal combustion engines installed in a vehicle must be consigned
under the entries ``Vehicle, flammable gas powered'' or ``Vehicle,
flammable liquid powered,'' as appropriate. If a vehicle is powered by a
flammable liquid and a flammable gas internal combustion engine, it must
be consigned under the entry ``Vehicle, flammable gas powered.'' These
entries include hybrid electric vehicles powered by both an internal
combustion engine and wet, sodium or lithium batteries installed. If a
fuel cell engine is installed in a vehicle, the vehicle must be
consigned using the entries ``Vehicle, fuel cell, flammable gas
powered'' or ``Vehicle, fuel cell, flammable liquid powered,'' as
appropriate. These entries include hybrid electric vehicles powered by a
fuel cell, an internal combustion engine, and wet, sodium or lithium
batteries installed. For the purpose of this special provision, vehicles
are self-propelled apparatus designed to carry one or more persons or
goods. Examples of such vehicles are cars, motorcycles, trucks,
locomotives, scooters, three- and four-wheeled vehicles or motorcycles,
lawn tractors, self-propelled farming and construction equipment, boats
and aircraft.
136 This entry only applies to machinery and apparatus containing
hazardous materials as an integral element of the machinery or
apparatus. It may not be used to describe machinery or apparatus for
which a proper shipping name exists in the Sec. 172.101 Table. Except
when approved by the Associate Administrator, machinery or apparatus may
only contain hazardous materials for which exceptions are referenced in
Column (8) of the Sec. 172.101 Table and are provided in part 173,
subparts D and G, of this subchapter. Hazardous materials shipped under
this entry are excepted from the labeling requirements of this
subchapter unless offered for transportation or transported by aircraft
and are not subject to the placarding requirements of subpart F of this
part. Orientation markings as described in Sec. 172.312(a)(2) are
required when liquid hazardous materials may escape due to incorrect
orientation. The machinery or apparatus, if unpackaged, or the packaging
in which it is contained shall be marked ``Dangerous goods in
machinery'' or ``Dangerous goods in apparatus,'' as appropriate, with
the identification number UN3363. For transportation by aircraft,
machinery or apparatus may not contain any material forbidden for
transportation by passenger or cargo aircraft. The Associate
Administrator may except from the requirements of this subchapter
equipment, machinery and apparatus provided:
a. It is shown that it does not pose a significant risk in
transportation;
b. The quantities of hazardous materials do not exceed those
specified in Sec. 173.4a of this subchapter; and
c. The equipment, machinery or apparatus conforms with Sec. 173.222
of this subchapter.
137 Cotton, dry; flax, dry; sisal, dry; and tampico fiber, dry are not
subject to the requirements of this subchapter when they are baled in
accordance with ISO 8115, ``Cotton Bales--Dimensions and Density'' (IBR,
see Sec. 171.7 of this subchapter) to a density of not less than 360
kg/m\3\ (22.1 lb/ft\3\) for cotton, 400 kg/m\3\ (24.97 lb/ft\3\) for
flax, 620 kg/m\3\ (38.71 lb/ft\3\) for sisal and 360 kg/m\3\ (22.1 lb/
ft\3\) for tampico fiber and transported in a freight container or
closed transport vehicle.
138 This entry applies to lead compounds which, when mixed in a ratio of
1:1,000 with 0.07 M (Molar concentration) hydrochloric acid and stirred
for one hour at a temperature of 23 [deg]C 2
[deg]C, exhibit a solubility of more than 5%. Lead compounds which, when
mixed in a ratio of 1:1,000 with 0.07 M (Molar concentration)
hydrochloric acid and stirred for one hour at a temperature of 23 [deg]C
2 [deg]C, exhibit a solubility of 5% or less are
not subject to the requirements of this subchapter unless they meet
criteria as another hazard class or division. Lead compounds that have a
solubility of 5% or less in accordance with this special provision are
not subject to the requirements of this subchapter that pertain to
Marine Pollutants.
139 Use of the ``special arrangement'' proper shipping names for
international shipments must be made under an IAEA Certificate of
Competent Authority issued by the Associate Administrator in accordance
with the requirements in Sec. 173.471, Sec. 173.472, or Sec. 173.473
of this subchapter. Use of these proper shipping names for domestic
shipments may be made only under a DOT special permit, as defined in,
and in accordance with the requirements of subpart B of part 107 of this
subchapter.
140 This material is regulated only when it meets the defining criteria
for a hazardous substance or a marine pollutant. In addition, the column
5 reference is modified to read ``III'' on those occasions when this
material is offered for transportation or transported by highway or
rail.
141 A toxin obtained from a plant, animal, or bacterial source
containing an infectious substance, or a toxin contained in an
infectious substance, must be classed as Division 6.2, described as an
infectious substance, and assigned to UN 2814 or UN 2900, as
appropriate.
142 These hazardous materials may not be classified and transported
unless authorized by the Associate Administrator. The Associate
Administrator will base the authorization on results from Series 2 tests
[[Page 351]]
and a Series 6(c) test from the UN Manual of Tests and Criteria (IBR,
see Sec. 171.7 of this subchapter) on packages as prepared for
transport in accordance with the requirements of this subchapter.
144 If transported as a residue in an underground storage tank (UST), as
defined in 40 CFR 280.12, that has been cleaned and purged or rendered
inert according to the American Petroleum Institute (API) Standard 1604
(IBR, see Sec. 171.7 of this subchapter), then the tank and this
material are not subject to any other requirements of this subchapter.
However, sediments remaining in the tank that meet the definition for a
hazardous material are subject to the applicable regulations of this
subchapter.
145 This entry applies to formulations that neither detonate in the
cavitated state nor deflagrate in laboratory testing, show no effect
when heated under confinement, exhibit no explosive power, and are
thermally stable (self-accelerating decomposition temperature (SADT) at
60 [deg]C (140 [deg]F) or higher for a 50 kg (110.2 lbs.) package).
Formulations not meeting these criteria must be transported under the
provisions applicable to the appropriate entry in the Organic Peroxide
Table in Sec. 173.225 of this subchapter.
146 This description may be used for a material that poses a hazard to
the environment but does not meet the definition for a hazardous waste
or a hazardous substance, as defined in Sec. 171.8 of this subchapter,
or any hazard class, as defined in part 173 of this subchapter, if it is
designated as environmentally hazardous by another Competent Authority.
This provision may be used for both domestic and international
shipments.
147 This entry applies to non-sensitized emulsions, suspensions, and
gels consisting primarily of a mixture of ammonium nitrate and fuel,
intended to produce a Type E blasting explosive only after further
processing prior to use. The mixture for emulsions typically has the
following composition: 60-85% ammonium nitrate; 5-30% water; 2-8% fuel;
0.5-4% emulsifier or thickening agent; 0-10% soluble flame suppressants;
and trace additives. Other inorganic nitrate salts may replace part of
the ammonium nitrate. The mixture for suspensions and gels typically has
the following composition: 60-85% ammonium nitrate; 0-5% sodium or
potassium perchlorate; 0-17% hexamine nitrate or monomethylamine
nitrate; 5-30% water; 2-15% fuel; 0.5-4% thickening agent; 0-10% soluble
flame suppressants; and trace additives. Other inorganic nitrate salts
may replace part of the ammonium nitrate. These substances must
satisfactorily pass Tests 8(a), (b) and (c) of Test Series 8 of the UN
Manual of Tests and Criteria, Part I, Section 18 (IBR, see Sec. 171.7
of this subchapter), and may not be classified and transported unless
approved by the Associate Administrator.
148 For domestic transportation, this entry directs to Sec. 173.66 for:
a. The standards for transporting a single bulk hazardous material
for blasting by cargo tank motor vehicles (CTMV); and
b. The standards for CTMVs capable of transporting multiple
hazardous materials for blasting in bulk and non-bulk packagings (i.e.,
a multipurpose bulk truck (MBT)).
149 When transported as a limited quantity or a consumer commodity, the
maximum net capacity specified in Sec. 173.150(b)(2) of this subchapter
for inner packagings may be increased to 5 L (1.3 gallons).
150 This description may be used only for uniform mixtures of
fertilizers containing ammonium nitrate as the main ingredient within
the following composition limits:
a. Not less than 90% ammonium nitrate with not more than 0.2% total
combustible, organic material calculated as carbon, and with added
matter, if any, that is inorganic and inert when in contact with
ammonium nitrate; or
b. Less than 90% but more than 70% ammonium nitrate with other
inorganic materials, or more than 80% but less than 90% ammonium nitrate
mixed with calcium carbonate and/or dolomite and/or mineral calcium
sulphate, and not more than 0.4% total combustible, organic material
calculated as carbon; or
c. Ammonium nitrate-based fertilizers containing mixtures of
ammonium nitrate and ammonium sulphate with more than 45% but less than
70% ammonium nitrate, and not more than 0.4% total combustible, organic
material calculated as carbon such that the sum of the percentage of
compositions of ammonium nitrate and ammonium sulphate exceeds 70%.
151 If this material meets the definition of a flammable liquid in Sec.
173.120 of this subchapter, a FLAMMABLE LIQUID label is also required
and the basic description on the shipping paper must indicate the Class
3 subsidiary hazard.
155 Fish meal, fish scrap and krill meal may not be transported if the
temperature at the time of loading either exceeds 35 [deg]C (95 [deg]F),
or exceeds 5 [deg]C (41 [deg]F) above the ambient temperature, whichever
is higher.
156 Asbestos that is immersed or fixed in a natural or artificial binder
material, such as cement, plastic, asphalt, resins or mineral ore, or
contained in manufactured products is not subject to the requirements of
this subchapter.
157 When transported as a limited quantity or a consumer commodity, the
maximum net capacity specified in Sec. 173.151(b)(1)(i) of
[[Page 352]]
this subchapter for inner packagings may be increased to 5 kg (11
pounds).
159 This material must be protected from direct sunshine and kept in a
cool, well-ventilated place away from sources of heat.
160 This entry applies to safety devices for vehicles, vessels or
aircraft, e.g. air bag inflators, air bag modules, seat-belt
pretensioners, and pyromechanical devices containing Class 1 (explosive)
materials or materials of other hazard classes. These articles must be
tested in accordance with Test series 6(c) of Part I of the UN Manual of
Tests and Criteria (incorporated by reference; see Sec. 171.7 of this
subchapter), with no explosion of the device, no fragmentation of device
casing or pressure vessel, and no projection hazard or thermal effect
that would significantly hinder fire-fighting or other emergency
response efforts in the immediate vicinity. If the air bag inflator unit
satisfactorily passes the series 6(c) test, it is not necessary to
repeat the test on the air bag module. This entry does not apply to life
saving appliances described in Sec. 173.219 (UN2990 and UN3072).
162 This material may be transported under the provisions of Division
4.1 only if it is packed so that at no time during transport will the
percentage of diluent fall below the percentage that is stated in the
shipping description.
163 Substances must satisfactorily pass Test Series 8 of the UN Manual
of Tests and Criteria, Part I, Section 18 (IBR, see Sec. 171.7 of this
subchapter).
164 Substances must not be transported under this entry unless approved
by the Associate Administrator on the basis of the results of
appropriate tests according to Part I of the UN Manual of Tests and
Criteria (IBR, see Sec. 171.7 of this subchapter). The material must be
packaged so that the percentage of diluent does not fall below that
stated in the approval at any time during transportation.
165 These substances are susceptible to exothermic decomposition at
elevated temperatures. Decomposition can be initiated by heat, moisture
or by impurities (e.g., powdered metals (iron, manganese, cobalt,
magnesium)). During the course of transportation, these substances must
be shaded from direct sunlight and all sources of heat and be placed in
adequately ventilated areas.
166 When transported in non-friable tablet form, calcium hypochlorite,
dry, may be transported as a Packing Group III material.
167 These storage systems must always be considered as containing
hydrogen. A metal hydride storage system installed in or intended to be
installed in a vehicle or equipment or in vehicle or equipment
components must be approved for transport by the Associate
Administrator. A copy of the approval must accompany each shipment.
168 For lighters containing a Division 2.1 gas (see Sec. 171.8 of this
subchapter), representative samples of each new lighter design must be
examined and successfully tested as specified in Sec. 173.308(b)(3).
For criteria in determining what is a new lighter design, see Sec.
173.308(b)(1). For transportation of new lighter design samples for
examination and testing, see Sec. 173.308(b)(2). The examination and
testing of each lighter design must be performed by a person authorized
by the Associate Administrator under the provisions of subpart E of part
107 of this chapter, as specified in Sec. 173.308(a)(4). For continued
use of approvals dated prior to January 1, 2012, see Sec.
173.308(b)(5).
For non-pressurized lighters containing a Class 3 (flammable liquid)
material, its design, description, and packaging must be approved by the
Associate Administrator prior to being offered for transportation or
transported in commerce. In addition, a lighter design intended to
contain a non-pressurized Class 3 material is excepted from the
examination and testing criteria specified in Sec. 173.308(b)(3). An
unused lighter or a lighter that is cleaned of residue and purged of
vapors is not subject to the requirements of this subchapter.
169 This entry applies to lighter refills (see Sec. 171.8 of this
subchapter) that contain a Division 2.1 (flammable) gas but do not
contain an ignition device. Lighter refills offered for transportation
under this entry may not exceed 4 fluid ounces capacity (7.22 cubic
inches) or contain more than 65 grams of fuel. A lighter refill
exceeding 4 fluid ounces capacity (7.22 cubic inches) or containing more
than 65 grams of fuel must be classed as a Division 2.1 material,
described with the proper shipping name appropriate for the material,
and packaged in the packaging specified in part 173 of this subchapter
for the flammable gas contained therein. In addition, a container
exceeding 4 fluid ounces volumetric capacity (7.22 cubic inches) or
containing more than 65 grams of fuel may not be connected or manifolded
to a lighter or similar device and must also be described and packaged
according to the fuel contained therein. For transportation by
passenger-carrying aircraft, the net mass of lighter refills may not
exceed 1 kg per package, and, for cargo-only aircraft, the net mass of
lighter refills may not exceed 15 kg per package. See Sec. 173.306(h)
of this subchapter.
170 Air must be eliminated from the vapor space by nitrogen or other
means.
[[Page 353]]
171 This entry may only be used when the material is transported in non-
friable tablet form or for granular or powered mixtures that have been
shown to meet the PG III criteria in Sec. 173.127.
172 This entry includes alcohol mixtures containing up to 5% petroleum
products.
173 For adhesives, printing inks, printing ink-related materials,
paints, paint-related materials, and resin solutions which are assigned
to UN3082, and do not meet the definition of another hazard class, metal
or plastic packaging for substances of packing groups II and III in
quantities of 5 L (1.3 gallons) or less per packaging are not required
to meet the UN performance package testing when transported:
a. Except for transportation by aircraft, in palletized loads, a
pallet box or unit load device (e.g. individual packaging placed or
stacked and secured by strapping, shrink or stretch-wrapping or other
suitable means to a pallet). For vessel transport, the palletized loads,
pallet boxes or unit load devices must be firmly packed and secured in
closed cargo transport units; or
b. Except for transportation by aircraft, as an inner packaging of a
combination packaging with a maximum net mass of 40 kg (88 pounds). For
transportation by aircraft, as an inner packaging of a combination
packaging with a maximum gross mass of 30 kg when packaged as a limited
quantity in accordance with Sec. 173.27(f).
175 This substance must be stabilized when in concentrations of not more
than 99%.
176 This entry must be used for formaldehyde solutions containing
methanol as a stabilizer. Formaldehyde solutions not containing methanol
and not meeting the Class 3 flammable liquid criteria must be described
using a different proper shipping name.
177 Gasoline, or, ethanol and gasoline mixtures, for use in internal
combustion engines (e.g., in automobiles, stationary engines and other
engines) must be assigned to Packing Group II regardless of variations
in volatility.
181 When a package contains a combination of lithium batteries contained
in equipment and lithium batteries packed with equipment, the following
requirements apply:
a. The shipper must ensure that all applicable requirements of Sec.
173.185 of this subchapter are met. The total mass of lithium batteries
contained in any package must not exceed the quantity limits in columns
(9A) and (9B) for passenger aircraft or cargo aircraft, as applicable;
b. Except as provided in Sec. 173.185(c)(3) of this subchapter, the
package must be marked ``UN 3091 Lithium metal batteries packed with
equipment'', or ``UN 3481 Lithium ion batteries packed with equipment,''
as appropriate. If a package contains both lithium metal batteries and
lithium ion batteries packed with and contained in equipment, the
package must be marked as required for both battery types. However,
button cell batteries installed in equipment (including circuit boards)
need not be considered; and
c. The shipping paper must indicate ``UN 3091 Lithium metal
batteries packed with equipment'' or ``UN 3481 Lithium ion batteries
packed with equipment,'' as appropriate. If a package contains both
lithium metal batteries and lithium ion batteries packed with and
contained in equipment, then the shipping paper must indicate both ``UN
3091 Lithium metal batteries packed with equipment'' and ``UN 3481
Lithium ion batteries packed with equipment.''
182 Equipment containing only lithium batteries must be classified as
either UN 3091 or UN 3481.
198 Nitrocellulose solutions containing not more than 20% nitrocellulose
may be transported as paint, perfumery products, or printing ink, as
applicable, provided the nitrocellulose contains no more 12.6% nitrogen
(by dry mass). See UN1210, UN1263, UN1266, UN3066, UN3469, and UN3470.
200 Division 1.4G consumer fireworks may be certified for transportation
by a DOT-approved Fireworks Certification Agency in accordance with the
provisions of Sec. 173.65 of this subchapter.
222 Shipments offered for transportation by aircraft may not be
reclassed as ORM-D.
237 ``Batteries, dry, containing potassium hydroxide solid, electric
storage'' must be prepared and packaged in accordance with the
requirements of Sec. 173.159(a) and (c). For transportation by
aircraft, the provisions of Sec. 173.159(b)(2) apply. This entry may
only be used for the transport of non-activated batteries that contain
dry potassium hydroxide and that are intended to be activated prior to
use by the addition of an appropriate amount of water to the individual
cells.
238 Neutron radiation detectors: a. Neutron radiation detectors
containing non-pressurized boron trifluoride gas in excess of 1 gram
(0.035 ounces) and radiation detection systems containing such neutron
radiation detectors as components may be transported by highway, rail,
vessel, or cargo aircraft in accordance with the following:
a. Each radiation detector must meet the following conditions:
(1) The pressure in each neutron radiation detector must not exceed
105 kPa absolute at 20 [deg]C (68 [deg]F);
(2) The amount of gas must not exceed 13 grams (0.45 ounces) per
detector; and
[[Page 354]]
(3) Each neutron radiation detector must be of welded metal
construction with brazed metal to ceramic feed through assemblies. These
detectors must have a minimum burst pressure of 1800 kPa as demonstrated
by design type qualification testing; and
(4) Each detector must be tested to a 1 x 10-10 cm\3\/s
leaktightness standard before filling.
b. Radiation detectors transported as individual components must be
transported as follows:
(1) They must be packed in a sealed intermediate plastic liner with
sufficient absorbent or adsorbent material to absorb or adsorb the
entire gas contents.
(2) They must be packed in strong outer packagings and the completed
package must be capable of withstanding a 1.8 meter (5.9 feet) drop
without leakage of gas contents from detectors.
(3) The total amount of gas from all detectors per outer packaging
must not exceed 52 grams (1.83 ounces).
c. Completed neutron radiation detection systems containing
detectors meeting the conditions of paragraph a(1) of this special
provision must be transported as follows:
(1) The detectors must be contained in a strong sealed outer casing;
(2) The casing must contain include sufficient absorbent or
adsorbent material to absorb or adsorb the entire gas contents;
(3) The completed system must be packed in strong outer packagings
capable of withstanding a 1.8 meter (5.9 feet) drop test without leakage
unless a system's outer casing affords equivalent protection.
d. Except for transportation by aircraft, neutron radiation
detectors and radiation detection systems containing such detectors
transported in accordance with paragraph a. of this special provision
are not subject to the labeling and placarding requirements of part 172
of this subchapter.
e. When transported by highway, rail, vessel, or as cargo on an
aircraft, neutron radiation detectors containing not more than 1 gram of
boron trifluoride, including those with solder glass joints are not
subject to any other requirements of this subchapter provided they meet
the requirements in paragraph a(1) of this special provision and are
packed in accordance with paragraph a(2) of this special provision.
Radiation detection systems containing such detectors are not subject to
any other requirements of this subchapter provided they are packed in
accordance with paragraph a(3) of this special provision.
328 When lithium metal or lithium ion batteries are contained in the
fuel cell system, the item must be described under this entry and the
appropriate entries for ``Lithium metal batteries contained in
equipment'' or ``Lithium ion batteries contained in equipment''.
332 Magnesium nitrate hexahydrate is not subject to the requirements of
this subchapter.
335 Mixtures of solids that are not subject to this subchapter and
environmentally hazardous liquids or solids may be classified as
``Environmentally hazardous substances, solid, n.o.s,'' UN3077 and may
be transported under this entry, provided there is no free liquid
visible at the time the material is loaded or at the time the packaging
or transport unit is closed. Each transport unit must be leakproof when
used as bulk packaging.
336 The use of UN1H1 drums, UN3H1 jerricans, and UN6HA1 composite
packagings which meet the requirements of part 178 of the HMR at the
Packing Group I or II performance level. These packagings are not
required to: (1.) meet the venting requirements in Sec. 173.24(g) or
(2.) be marked with the hydrostatic pressure test marking specified in
Sec. 173.24a(b)(4). Shipment of packages under this special provision
must be made by private or contract motor carrier. Transportation of
these packages also requires the door of each van trailer to be marked
with ``Warning trailer may contain chemical vapor. Do not enter until
vapors have dissipated.'' The driver of the transport vehicle and the
consignee(s) must be trained not to enter the transport vehicle until
the ammonia vapors have dissipated, and the emergency response
information on the shipping paper must indicate that the vehicle
contains ammonia vapors. This training must be documented in training
records required by Sec. 172.704(d). Transport vehicles must be vented
to prevent accumulation of vapors at a poisonous or flammable
concentration.
337 Authorizes the use of regulated waste containers manufactured prior
to October 1, 2006 to be marked with the alternative shipping name of
Regulated medical waste, UN3291 and arrows that deviate as prescribed in
Sec. 172.312(a)(2) in that they may be black or white.
338 Life Saving appliances, self-inflating transported by motor vehicle
only between an U.S. Coast Guard approved inflatable life raft servicing
facility and a vessel are only subject to the following requirements:
a. Prior to repacking into the life-saving appliance, an installed
inflation cylinder must successfully meet and pass all inspection and
test criteria and standards of the raft manufacturer and the vessel Flag
State requirements for cylinders installed as part of life-saving
appliances, self-inflating (UN2990) used on marine vessels.
Additionally, each cylinder must
[[Page 355]]
be visually inspected in accordance with CGA pamphlet, CGA C-6
(incorporated by reference, see Sec. 171.7). A current copy of CGA
pamphlet, CGA C-6 must be available at the facility servicing the life-
saving appliance.
b. An installed inflation cylinder that requires recharging must be
filled in accordance with Sec. 173.301(l).
c. Every installed inflation cylinder, as associated equipment of
the life-saving appliance, must be packed within the protective
packaging of the life raft and the life raft itself must otherwise be in
compliance with Sec. 173.219.
d. The serial number for each cylinder must be recorded as part of
the life-saving appliance service record by the U.S. Coast Guard-
approved servicing facility.
340 This entry applies only to the vessel transportation of nickel-metal
hydride batteries as cargo. Nickel-metal hydride button cells or nickel-
metal hydride cells or batteries packed with or contained in battery-
powered devices transported by vessel are not subject to the
requirements of this special provision. See ``Batteries, dry, sealed,
n.o.s.'' in the Sec. 172.101 Hazardous Materials Table (HMT) of this
part for transportation requirements for nickel-metal hydride batteries
transported by other modes and for nickel-metal hydride button cells or
nickel-metal hydride cells or batteries packed with or contained in
battery-powered devices transported by vessel. Nickel-metal hydride
batteries subject to this special provision are subject only to the
following requirements: (1) The batteries must be prepared and packaged
for transport in a manner to prevent a dangerous evolution of heat,
short circuits, and damage to terminals; and are subject to the incident
reporting in accordance with Sec. 171.16 of this subchapter if a fire,
violent rupture, explosion or dangerous evolution of heat (i.e., an
amount of heat sufficient to be dangerous to packaging or personal
safety to include charring of packaging, melting of packaging, scorching
of packaging, or other evidence) occurs as a direct result of a nickel
metal hydride battery; and (2) when loaded in a cargo transport unit in
a total quantity of 100 kg gross mass or more, the shipping paper
requirements of Subpart C of this part, the manifest requirements of
Sec. 176.30 of this subchapter, and the vessel stowage requirements
assigned to this entry in Column (10) of the Sec. 172.101 Hazardous
Materials Table.
342 Glass inner packagings (such as ampoules or capsules) intended only
for use in sterilization devices, when containing less than 30 mL of
ethylene oxide per inner packaging with not more than 300 mL per outer
packaging, may be transported in accordance with Sec. 173.4a of this
subchapter, irrespective of the restriction of Sec. 173.4a(b) and the
indication of ``forbidden'' in columns (9A) and (9B) of the Sec.
172.101 table provided that:
a. After filling, each glass inner packaging must be determined to
be leak-tight by placing the glass inner packaging in a hot water bath
at a temperature and for a period of time sufficient to ensure that an
internal pressure equal to the vapor pressure of ethylene oxide at 55
[deg]C is achieved. Any glass inner packaging showing evidence of
leakage, distortion or other defect under this test must not be
transported under the terms of this special provision;
b. In addition to the packaging required in Sec. 173.4a, each glass
inner packaging must be placed in a sealed plastic bag compatible with
ethylene oxide and capable of containing the contents in the event of
breakage or leakage of the glass inner packaging; and
c. Each glass inner packaging is protected by a means of preventing
puncture of the plastic bag (e.g., sleeves or cushioning) in the event
of damage to the packaging (e.g., by crushing).
343 A bulk packaging that emits hydrogen sulfide in sufficient
concentration that vapors evolved from the crude oil can present an
inhalation hazard must be marked as specified in Sec. 172.327of this
part.
345 ``Nitrogen, refrigerated liquid (cryogenic liquid), UN1977''
transported in open cryogenic receptacles with a maximum capacity of 1 L
are not subject to the requirements of this subchapter. The receptacles
must be constructed with glass double walls having the space between the
walls vacuum insulated and each receptacle must be transported in an
outer packaging with sufficient cushioning and absorbent materials to
protect the receptacle from damage.
346 ``Nitrogen, refrigerated liquid (cryogenic liquid), UN1977''
transported in accordance with the requirements for open cryogenic
receptacles in Sec. 173.320 and this special provision are not subject
to any other requirements of this subchapter. The receptacle must
contain no hazardous materials other than the liquid nitrogen which must
be fully absorbed in a porous material in the receptacle.
347 Effective July 1, 2011, for transportation by aircraft, this entry
may only be used if the results of Test series 6(d) of Part I of the UN
Manual of Tests and Criteria (IBR, see Sec. 171.7 of this subchapter)
have demonstrated that any hazardous effects from accidental functioning
are confined to within the package. Effective January 1, 2012, for
transportation by vessel, this entry may only be used if the results of
Test Series 6(d) of Part I of the UN Manual of Tests and Criteria (IBR,
see Sec. 171.7 of this
[[Page 356]]
subchapter) have demonstrated that any hazardous effects from accidental
functioning are confined to within the package. Effective January 1,
2014, for transportation domestically by highway or rail, this entry may
only be used if the results of Test Series 6(d) of Part I of the UN
Manual of Tests and Criteria (IBR, see Sec. 171.7 of this subchapter)
have demonstrated that any hazardous effects from accidental functioning
are confined to within the package. Testing must be performed or
witnessed by a person who is approved by the Associate Administrator
(see Sec. 173.56(b) of this subchapter). All successfully conducted
tests or reassignment to another compatibility group require the
issuance of a new or revised approval by the Associate Administrator
prior to transportation on or after the dates specified for each
authorized mode of transport in this special provision.
349 Mixtures of hypochlorite with an ammonium salt are forbidden for
transport. A hypochlorite solution, UN1791, is a Class 8 corrosive
material.
350 Ammonium bromate, ammonium bromate aqueous solutions, and mixtures
of a bromate with an ammonium salt are forbidden for transport.
351 Ammonium chlorate, ammonium chlorate aqueous solutions, and mixtures
of a chlorate with an ammonium salt are forbidden for transport.
352 Ammonium chlorite, ammonium chlorite aqueous solutions, and mixtures
of a chlorite with an ammonium salt are forbidden for transport.
353 Ammonium permanganate, ammonium permanganate aqueous solutions, and
mixtures of a permanganate with an ammonium salt are forbidden for
transport.
357 A bulk packaging that emits hydrogen sulfide in sufficient
concentration that vapors evolved from the crude oil can present an
inhalation hazard must be marked as specified in Sec. 172.327 of this
part.
360 Vehicles only powered by lithium batteries must be assigned the
identification number UN3171.
361 Capacitors with an energy storage capacity of 0.3 Wh or less are not
subject to the requirements of this subchapter. Energy storage capacity
means the energy held by a capacitor, as calculated using the nominal
voltage and capacitance. This entry does not apply to capacitors that by
design maintain a terminal voltage (e.g., asymmetrical capacitors.)
362 This entry applies to liquids, pastes or powders, pressurized with a
propellant that meets the definition of a gas in Sec. 173.115. A
chemical under pressure packaged in an aerosol dispenser must be
transported under UN1950. The chemical under pressure must be classed
based on the hazard characteristics of the components in the propellant;
the liquid; or the solid. The following provisions also apply:
a. If one of the components, which can be a pure substance or a
mixture, is classed as flammable, the chemical under pressure must be
classed as flammable in Division 2.1. Flammable components are flammable
liquids and liquid mixtures, flammable solids and solid mixtures or
flammable gases and gas mixtures meeting the following criteria:
(1) A flammable liquid is a liquid having a flashpoint of not more
than 93 [deg]C (200 [deg]F);
(2) A flammable solid is a solid that meets the criteria in Sec.
173.124 of this subchapter; or
(3) A flammable gas is a gas that meets the criteria in Sec.
173.115 of this subchapter.
b. Gases of Division 2.3 and gases with a subsidiary risk of 5.1
must not be used as a propellant in a chemical under pressure.
c. Where the liquid or solid components are classed as Division 6.1,
Packing Group II or III, or Class 8, Packing Group II or III, the
chemical under pressure must be assigned a subsidiary risk of Division
6.1 or Class 8 and the appropriate identification number must be
assigned. Components classed as Division 6.1, Packing Group I, or Class
8, Packing Group I, must not be offered for transportation and
transported under this description.
d. A chemical under pressure with components meeting the properties
of: Class 1 (explosives); Class 3 (liquid desensitized explosives);
Division 4.1 (self-reactive substances and solid desensitized
explosives); Division 4.2 (substances liable to spontaneous combustion);
Division 4.3 (substances which, in contact with water, emit flammable
gases or toxic gases); Division 5.1 (oxidizing substances); Division 5.2
(organic peroxides); Division 6.2 (Infectious substances); or, Class 7
(Radioactive material), must not be offered for transportation under
this description.
e. A description to which special provision 170 or TP7 is assigned
in Column 7 of the Sec. 172.101 Hazardous Materials Table, and
therefore requires air to be eliminated from the package vapor space by
nitrogen or other means, must not be offered for transportation under
this description.
f. Chemicals under pressure containing components forbidden for
transport on both passenger and cargo aircraft in Columns (9A) and (9B)
of the Sec. 172.101 Hazardous Materials Table must not be transported
by air.
365 For manufactured instruments and articles containing mercury, see
UN3506.
367 For the purposes of documentation and package marking:
[[Page 357]]
a. The proper shipping name ``Paint related material'' may be used
for consignments of packages containing ``Paint'' and ``Paint related
material'' in the same package;
b. The proper shipping name ``Paint related material, corrosive,
flammable'' may be used for consignments of packages containing ``Paint,
corrosive, flammable'' and ``Paint related material, corrosive,
flammable'' in the same package;
c. The proper shipping name ``Paint related material, flammable,
corrosive'' may be used for consignments of packages containing ``Paint,
flammable, corrosive'' and ``Paint related material, flammable,
corrosive'' in the same package; and
d. The proper shipping name ``Printing ink related material'' may be
used for consignments of packages containing ``Printing ink'' and
``Printing ink related material'' in the same package.
368 In the case of non-fissile or fissile-excepted uranium hexafluoride,
the material must be classified under UN3507 or UN2978.
369 In accordance with Sec. 173.2a of this subchapter, this radioactive
material in an excepted package possessing corrosive properties is
classified in Division 6.1 with a radioactive material and corrosive
subsidiary risk. Uranium hexafluoride may be classified under this entry
only if the conditions of Sec. Sec. 173.420(a)(4) and (6) and (d) and
173.421(b) and (d) of this subchapter, and, for fissile-excepted
material, the conditions of Sec. 173.453 of this subchapter are met. In
addition to the provisions applicable to the transport of Division 6.1
substances, the provisions of Sec. Sec. 173.421(c) and 173.443(a) of
this subchapter apply. In addition, packages shall be legibly and
durably marked with an identification of the consignor, the consignee,
or both. No Class 7 label is required to be displayed. The consignor
shall be in possession of a copy of each applicable certificate when
packages include fissile material excepted by competent authority
approval. When a consignment is undeliverable, the consignment shall be
placed in a safe location and the appropriate competent authority shall
be informed as soon as possible and a request made for instructions on
further action. If it is evident that a package of radioactive material,
or conveyance carrying unpackaged radioactive material, is leaking, or
if it is suspected that the package, or conveyance carrying unpackaged
material, may have leaked, the requirements of Sec. 173.443(e) of this
subchapter apply.
370 This entry also applies to Ammonium nitrate with not more than 0.2%
combustible substances, including any organic substance calculated as
carbon, to the exclusion of any added substance, that gives a positive
result when tested in accordance with Test Series 2 of the UN Manual of
Tests and Criteria, Part I (incorporated by reference; see Sec. 171.7
of this subchapter). See also UN No. 1942.
371 a. This entry also applies to articles not conforming to the
requirements of Sec. Sec. 173.302, 173.304, or 173.306 of this
subchapter, containing a small pressure receptacle with a release
device. Such articles must comply with the following requirements:
(1) The water capacity of the pressure receptacle must not exceed
0.5 L and the working pressure must not exceed 25 bar at 15 [deg]C (59
[deg]F);
(2) The minimum burst pressure of the pressure receptacle must be at
least four times the pressure of the gas at 15 [deg]C (59 [deg]F);
(3) Each article must be manufactured in such a way that
unintentional firing or release is avoided under normal conditions of
handling, packing, transport and use. This may be fulfilled by an
additional locking device linked to the activator;
(4) Each article must be manufactured in such a way as to prevent
hazardous projections of the pressure receptacle or parts of the
pressure receptacle;
(5) Each pressure receptacle must be manufactured from material
which will not fragment upon rupture;
(6) The design type of the article must be subjected to a fire test.
For this test, the provisions of paragraphs 16.6.1.2 except letter g,
16.6.1.3.1 to 16.6.1.3.6, 16.6.1.3.7(b) and 16.6.1.3.8 of the UN Manual
of Tests and Criteria must be applied. It must be demonstrated that the
article relieves its pressure by means of a fire degradable seal or
other pressure relief device, in such a way that the pressure receptacle
will not fragment and that the article or fragments of the article do
not rocket more than 10 meters; and
(7) The design type of the article must be subjected to the
following test. A stimulating mechanism must be used to initiate one
article in the middle of the packaging. There must be no hazardous
effects outside the package such as disruption of the package, metal
fragments or a receptacle which passes through the packaging.
b. The manufacturer must produce technical documentation of the
design type, manufacture as well as the tests and their results. The
manufacturer must apply procedures to ensure that articles produced in
series are made of good quality, conform to the design type and are able
to meet the requirements in (a). The manufacturer must provide such
information to a representative of the Department upon request.
372 This entry applies to asymmetric capacitors with an energy storage
capacity
[[Page 358]]
greater than 0.3 Wh. Capacitors with an energy storage capacity of 0.3
Wh or less are not subject to the requirements of this subchapter.
Energy storage capacity means the energy stored in a capacitor, as
calculated according to the following equation,
Wh = 1/2CN(UR\2\-UL\2\) x (1/3600)
Using the nominal capacitance (CN), rated voltage
(UR) and the rated lower limit voltage
(UL).
Nickel-carbon asymmetric capacitors containing Class 8 alkaline
electrolytes must be transported as UN2795, Batteries, wet, filled with
alkali, electric storage.
379 When offered for transport by highway, rail, or cargo vessel,
anhydrous ammonia adsorbed or absorbed on a solid contained in ammonia
dispensing systems or receptacles intended to form part of such systems
is not subject to the requirements of this subchapter if the following
conditions in this provision are met. In addition to meeting the
conditions in this provision, transport on cargo aircraft only may be
authorized with prior approval of the Associate Administrator.
a. The adsorption or absorption presents the following properties:
(1) The pressure at a temperature of 20 [deg]C (68 [deg]F) in the
receptacle is less than 0.6 bar (60 kPa);
(2) The pressure at a temperature of 35 [deg]C (95 [deg]F) in the
receptacle is less than 1 bar (100 kPa);
(3) The pressure at a temperature of 85 [deg]C (185 [deg]F) in the
receptacle is less than 12 bar (1200 kPa).
b. The adsorbent or absorbent material shall not meet the definition
or criteria for inclusion in Classes 1 to 8;
c. The maximum contents of a receptacle shall be 10 kg of ammonia;
and
d. Receptacles containing adsorbed or absorbed ammonia shall meet
the following conditions:
(1) Receptacles shall be made of a material compatible with ammonia
as specified in ISO 11114-1:2012 (IBR, see Sec. 171.7 of this
subchapter);
(2) Receptacles and their means of closure shall be hermetically
sealed and able to contain the generated ammonia;
(3) Each receptacle shall be able to withstand the pressure
generated at 85 [deg]C (185 [deg]F) with a volumetric expansion no
greater than 0.1%;
(4) Each receptacle shall be fitted with a device that allows for
gas evacuation once pressure exceeds 15 bar (1500 kPa) without violent
rupture, explosion or projection; and
(5) Each receptacle shall be able to withstand a pressure of 20 bar
(2000 kPa) without leakage when the pressure relief device is
deactivated.
e. When offered for transport in an ammonia dispenser, the
receptacles shall be connected to the dispenser in such a way that the
assembly is guaranteed to have the same strength as a single receptacle.
f. The properties of mechanical strength mentioned in this special
provision shall be tested using a prototype of a receptacle and/or
dispenser filled to nominal capacity, by increasing the temperature
until the specified pressures are reached.
g. The test results shall be documented, shall be traceable, and
shall be made available to a representative of the Department upon
request.
380 For transportation by private carrier in a motor carrier only, this
material is not subject to the segregation requirements of Sec.
177.848(d) of this subchapter under the following conditions:
a. The material is packaged in a DOT Specification 4BW240 cylinder,
or in a DOT-51 portable tank.
b. The material may only be loaded with Class 3, Class 8, and
Division 4.1 materials in Packing Group II or III.
c. The motor carrier must maintain a satisfactory safety rating as
prescribed in 49 CFR part 385.
381 For railroad flagging kits, see Sec. 173.184 (c) of this
subchapter.
382 Packages containing toy plastic or paper caps for toy pistols
described as ``UN0349, Articles, explosive, n.o.s. (Toy caps), 1.4S'' or
``NA0337, Toy caps, 1.4S'' are not subject to the subpart E (labeling)
requirements of this part when offered for transportation by motor
vehicle, rail freight, cargo vessel, and cargo aircraft and,
notwithstanding the packing method assigned in Sec. 173.62 of this
subchapter, in conformance with the following conditions:
a. The toy plastic or paper caps must be in the form of sheets,
strips, rolls, or individual caps;
b. The caps must not contain more than an average of twenty-five
hundredths of a grain of explosive composition per cap;
c. The caps must be packed inside packagings constructed of
cardboard not less than 0.013-inch in thickness, metal not less than
0.008-inch in thickness, non-combustible plastic not less than 0.015-
inch in thickness, or a composite blister package consisting of
cardboard not less than 0.013-inch in thickness and non-combustible
plastic not less than 0.005-inch in thickness that completely encloses
the caps;
d. The minimum dimensions of each side and each end of the cardboard
packaging must be 1/8th inch in height or more;
e. The number of caps inside each packaging must be limited so that
not more
[[Page 359]]
than 10 grains of explosives composition may be packed into one cubic
inch of space, and not more than 17.5 grains of the explosive
composition of toy caps may be packed in any inner packaging;
f. Inner packagings must be packed in outer packagings meeting PG II
performance criteria;
g. Toy caps may be packed with non-explosive or non-flammable
articles provided the outer packagings are marked as prescribed in this
paragraph;
h. Toy paper caps of any kind must not be packed in the same
packaging with fireworks;
i. The outside of each package must be plainly marked ``ARTICLES,
EXPLOSIVES, N.O.S. (TOY CAPS)--HANDLE CAREFULLY'' OR ``TOY CAPS--HANDLE
CAREFULLY''; and
j. Explosives shipped in conformance with this paragraph must have
been examined in accordance with Sec. 173.56 of this subchapter and
approved by the Associate Administrator.
383 For transportation by motor vehicle, substances meeting the
conditions for high viscosity flammable liquids as prescribed in Sec.
173.121(b)(1)(i), (b)(1)(ii), and (b)(1)(iv) of this subchapter, may be
reassigned to Packing Group III under the following conditions:
a. Packaging must be UN standard metal drums attached with heavy
duty steel strapping to a pallet; and
b. The capacity of each drum must not exceed 220 L (58 gallons).
384 For green graphite electrodes and shapes that are large single
component solid objects not subject to shifting, transport in open rail
flat cars, open bed motor vehicles, and intermodal containers is also
authorized. The objects must be secured to the flat car, motor vehicle,
intermodal container, or unitized by steel banding to wooden runners or
pallets and the units secured to the flat car, motor vehicle, or freight
container to prevent shifting and movement, including relative motion
between the objects, under conditions normally incident to
transportation. Stacking is permitted two or more levels high to achieve
maximum allowable utilization of the designated vehicle, rail car
weight, or intermodal freight container weight or vessel hold volume.
385 Notwithstanding the provisions of Sec. 177.834(l) of this
subchapter, cargo heaters may be used when weather conditions are such
that the freezing of a wetted explosive material is likely. Shipments
must be made by private, leased or contract carrier vehicles under
exclusive use of the offeror. Cargo heaters must be reverse
refrigeration (heat pump) units. Shipments made in accordance with this
Special provision are excepted from the requirements of Sec.
173.60(b)(4) of this subchapter.
386 When transported by private motor carrier only, the following
corrosive liquids may be packaged in polyethylene bottles with a
capacity no greater than 3.785L (one gallon), further packed inside an
open-top, heavy wall, high density polyethylene box (i.e., crate) in a
manner that the polyethylene bottles are not subjected to any
superimposed weight, and the boxes must be reasonably secured against
movement within the transport vehicle and loaded so as to minimize the
possibility of coming in contact with other lading:
Compounds, cleaning liquid, NA1760, PG II or III;
Corrosive liquid, acidic, inorganic, n.o.s., UN3264, PG II;
Corrosive liquid, acidic, organic, n.o.s., UN 3265, PG III;
Corrosive liquid, basic, inorganic, n.o.s., UN3266, PG II;
Hypochlorite solutions, UN1791, PG III;
Hydrochloric acid solution, UN 1789, PG II; and
Sulfuric acid, UN2796, PG II.
a. No more than four bottles, securely closed with threaded caps,
may be packed in each box.
b. Each empty bottle must have a minimum weight of not less than 140
grams and a minimum wall thickness of not less than 0.020 inch (0.508
mm).
c. The completed package must meet the Packing Group II performance
level, as applicable for combination packagings with a plastic box outer
packaging, in accordance with subpart M of part 178 of this subchapter.
(i) Tests must be performed on each type and size of bottle, for
each manufacturing location. Samples taken at random must withstand the
prescribed tests without breakage or leakage.
(ii) One bottle for every two hours of production, or for every 2500
bottles produced, must be tested by dropping a bottle filled to 98%
capacity with water from a height of 1.2 meters (3.9 feet) onto solid
concrete directly on the closure.
(iii) A copy of the test results must be kept on file at each
facility where packagings are offered for transportation, and must be
made available to a representative of the Department upon request.
(iv) The name or symbol of the bottle producer, and the month and
year of manufacture, must be marked by embossing, ink-jet printing of
permanent ink, or other permanent means on the face or bottom of each
bottle, in letters and numbers at least 6 mm (0.2 inch) high. Symbols,
if used, must be registered with the Associate Administrator.
[[Page 360]]
(v) The box must be constructed from high-density polyethylene in
the density range 0.950-0.962, and be capable of holding liquid when in
the upright position.
387 When materials are stabilized by temperature control, the provisions
of Sec. 173.21(f) of this subchapter apply. When chemical stabilization
is employed, the person offering the material for transport shall ensure
that the level of stabilization is sufficient to prevent the material as
packaged from dangerous polymerization at 50 [deg]C (122 [deg]F). If
chemical stabilization becomes ineffective at lower temperatures within
the anticipated duration of transport, temperature control is required
and is forbidden by aircraft. In making this determination factors to be
taken into consideration include, but are not limited to, the capacity
and geometry of the packaging and the effect of any insulation present,
the temperature of the material when offered for transport, the duration
of the journey, and the ambient temperature conditions typically
encountered in the journey (considering also the season of year), the
effectiveness and other properties of the stabilizer employed,
applicable operational controls imposed by regulation (e.g. requirements
to protect from sources of heat, including other cargo carried at a
temperature above ambient) and any other relevant factors. The
provisions of this special provision will be effective until January 2,
2019, unless we terminate them earlier or extend them beyond that date
by notice of a final rule in the Federal Register.
420 This entry does not apply to manufactured articles (such as table
tennis balls).
421 This entry will no longer be effective on January 2, 2019 unless we
terminate it earlier or extend it beyond that date by notice of a final
rule in the Federal Register.
422 When labelling is required, the label to be used must be the label
shown in Sec. 172.447. Labels conforming to requirements in place on
December 31, 2016 may continue to be used until December 31, 2018. When
a placard is displayed, the placard must be the placard shown in Sec.
172.560.
(2) ``A'' codes. These provisions apply only to transportation by
aircraft:
Code/Special Provisions
A1 Single packagings are not permitted on passenger aircraft.
A2 Single packagings are not permitted on aircraft.
A3 For combination packagings, if glass inner packagings (including
ampoules) are used, they must be packed with absorbent material in
tightly closed metal receptacles before packing in outer packagings.
A4 Liquids having an inhalation toxicity of Packing Group I are not
permitted on aircraft.
A5 Solids having an inhalation toxicity of Packing Group I are not
permitted on passenger aircraft and may not exceed a maximum net
quantity per package of 15 kg (33 pounds) on cargo aircraft.
A6 For combination packagings, if plastic inner packagings are used,
they must be packed in tightly closed metal receptacles before packing
in outer packagings.
A7 Steel packagings must be corrosion-resistant or have protection
against corrosion.
A8 For combination packagings, if glass inner packagings (including
ampoules) are used, they must be packed with cushioning material in
tightly closed metal receptacles before packing in outer packagings.
A9 For combination packagings, if plastic bags are used, they must be
packed in tightly closed metal receptacles before packing in outer
packagings.
A10 When aluminum or aluminum alloy construction materials are used,
they must be resistant to corrosion.
A11 For combination packagings, when metal inner packagings are
permitted, only specification cylinders constructed of metals which are
compatible with the hazardous material may be used.
A13 Bulk packagings are not authorized for transportation by aircraft.
A14 This material is not authorized to be transported as a limited
quantity or consumer commodity in accordance with Sec. 173.306 of this
subchapter when transported aboard an aircraft.
A19 Combination packagings consisting of outer fiber drums or plywood
drums, with inner plastic packagings, are not authorized for
transportation by aircraft.
A20 Plastic bags as inner receptacles of combination packagings are not
authorized for transportation by aircraft.
A29 Combination packagings consisting of outer expanded plastic boxes
with inner plastic bags are not authorized for transportation by
aircraft.
A30 Ammonium permanganate is not authorized for transportation on
aircraft.
A34 Aerosols containing a corrosive liquid in Packing Group II charged
with a gas are not permitted for transportation by aircraft.
A35 This includes any material which is not covered by any of the other
classes but which has an anesthetic, narcotic, noxious or other similar
properties such that, in the event of spillage or leakage on an
aircraft, extreme annoyance or discomfort could be caused to crew
members so as to prevent the correct performance of assigned duties.
[[Page 361]]
A37 This entry applies only to a material meeting the definition in
Sec. 171.8 of this subchapter for self-defense spray.
A51 Irrespective of the quantity limitations specified in Column (9A) of
the Sec. 172.101 Table or Sec. 175.75(c), the following aircraft
batteries may be transported on passenger aircraft as cargo:
a. Wet cell batteries, UN 2794 or UN 2795, up to a limit of 100kg
net mass per package;
b. Lithium ion batteries, UN 3480, packages containing a single
aircraft battery with a net mass not exceeding 35kg; and
c. Transport in accordance with this special provision must be noted
on the shipping paper.
A53 Refrigerating machines and refrigerating machine components are not
subject to the requirements of this subchapter when containing less than
12 kg (26.4 pounds) of a non-flammable gas or when containing 12 L (3
gallons) or less of ammonia solution (UN2672) (see Sec. 173.307 of this
subchapter).
A54 Irrespective of the quantity limits in Column 9B of the Sec.
172.101 table, a lithium battery, including a lithium battery packed
with, or contained in, equipment that otherwise meets the applicable
requirements of Sec. 173.185, may have a mass exceeding 35 kg if
approved by the Associate Administrator prior to shipment.
A56 Radioactive material with a subsidiary hazard of Division 4.2,
Packing Group I, must be transported in Type B packages when offered for
transportation by aircraft. Radioactive material with a subsidiary
hazard of Division 2.1 is forbidden from transport on passenger
aircraft.
A60 Sterilization devices, when containing less than 30 mL per inner
packaging with not more than 150 mL per outer packaging, may be
transported in accordance with the provisions in Sec. 173.4a,
irrespective of Sec. 173.4a(b), provided such packagings were first
subjected to comparative fire testing. Comparative fire testing between
a package as prepared for transport (including the substance to be
transported) and an identical package filled with water must show that
the maximum temperature measured inside the packages during testing does
not differ by more than 200 [deg]C (392 [deg]F). Packagings may include
a vent to permit the slow escape of gas (i.e. not more than 0.1 mL/hour
per 30 mL inner packaging at 20 [deg]C (68 [deg]F) produced from gradual
decomposition. The requirements of Sec. Sec. 173.24(g)(1) and 173.27(c)
do not apply.
A61 a. When used for purposes such as sterilization, inner packagings of
peroxyacetic acid, stabilized, classified as UN 3107 Organic peroxide
type E, liquid or UN 3109 Organic peroxide type F, liquid may be fitted
with a vent consisting of hydrophobic membrane, provided:
(1) Each inner packaging contains not more than 70 mL;
(2) The inner packaging is designed so that the vent is not immersed
in liquid in any orientation;
(3) Each inner packaging is enclosed in an intermediate rigid
plastic packaging with a small opening to permit release of gas and
contains a buffer that neutralizes the contents of the inner packaging
in the event of leakage;
(4) Intermediate packagings are packed in a fiberboard box (4G)
outer packaging;
(5) Each outer packaging contains not more than 1.4 L of liquid; and
(6) The rate of oxygen release from the outer packaging does not
exceed 15 mL per hour.
b. Such packages must be transported on cargo aircraft only. The
requirements of Sec. Sec. 173.24(g)(1) and 173.27(c) do not apply.
A82 The quantity limits in columns (9A) and (9B) do not apply to human
or animal body parts, whole organs or whole bodies known to contain or
suspected of containing an infectious substance.
A101 In addition to the applicable requirements of Sec. 173.185, the
quantity of lithium metal in the batteries contained in any piece of
equipment must not exceed 12 g per cell and 500 g per battery.
A105 The total net quantity of dangerous goods contained in one package,
excluding magnetic material, must not exceed the following:
a. 1 kg (2.2 pounds) in the case of solids;
b. 0.5 L (0.1 gallons) in the case of liquids;
c. 0.5 kg (1.1 pounds) in the case of Division 2.2 gases; or
d. any combination thereof.
A112 Notwithstanding the quantity limits shown in Column (9A) and (9B)
for this entry, the following IBCs are authorized for transportation
aboard passenger and cargo-only aircraft. Each IBC may not exceed a
maximum net quantity of 1,000 kg:
a. Metal: 11A, 11B, 11N, 21A, 21B and 21N
b. Rigid plastics: 11H1, 11H2, 21H1 and 21H2
c. Composite with plastic inner receptacle: 11HZ1, 11HZ2, 21HZ1 and
21HZ2
d. Fiberboard: 11G
e. Wooden: 11C, 11D and 11F (with inner liners)
f. Flexible: 13H2, 13H3, 13H4, 13H5, 13L2, 13L3, 13L4, 13M1 and 13M2
(flexible IBCs must be sift-proof and water resistant or must be fitted
with a sift-proof and water resistant liner).
A189 Except where the defining criteria of another class or division are
met, concentrations of formaldehyde solution:
a. With less than 25 percent but not less than 10 percent
formaldehyde, must be described as UN3334, Aviation regulated liquid,
n.o.s.; and
b. With less than 10 percent formaldehyde, are not subject to this
subchapter.
[[Page 362]]
A191 Notwithstanding the Division 6.1 subsidiary risk for this
description, the toxic subsidiary risk label and the requirement to
indicate the subsidiary risk on the shipping paper are not required for
manufactured articles containing less than 5 kg (11 pounds) of mercury.
A200 These articles must be transported as cargo and may not be carried
aboard an aircraft by passengers or crewmembers in carry-on baggage,
checked baggage, or on their person unless specifically authorized in
Sec. 175.10.
A210 This substance is forbidden for transport by air. It may be
transported on cargo aircraft only with the prior approval of the
Associate Administrator.
A212 ``UN 2031, Nitric acid, other than red fuming, with more than 20%
and less than 65% nitric acid'' intended for use in sterilization
devices only, may be transported on passenger aircraft irrespective of
the indication of ``forbidden'' in columns (9A) of the Sec. 172.101
table provided that:
a. Each inner packaging contains not more than 30 mL;
b. Each inner packaging is contained in a sealed leak-proof
intermediate packaging with sufficient absorbent material capable of
containing the contents of the inner packaging;
c. Intermediate packagings are securely packed in an outer packaging
of a type permitted by Sec. 173.158(g) of this subchapter which meet
the requirements of part 178 of this subchapter at the Packing Group I
performance level;
d. The maximum quantity of nitric acid in the package does not
exceed 300 mL; and
e. Transport in accordance with this special provision must be noted
on the shipping paper.
(3) ``B'' codes. These provisions apply only to bulk packagings.
Except as otherwise provided in this subchapter, these special
provisions do not apply to UN portable tanks or IBCs:
Code/Special Provisions
B1 If the material has a flash point at or above 38 [deg]C (100 [deg]F)
and below 93 [deg]C (200 [deg]F), then the bulk packaging requirements
of Sec. 173.241 of this subchapter are applicable. If the material has
a flash point of less than 38 [deg]C (100 [deg]F), then the bulk
packaging requirements of Sec. 173.242 of this subchapter are
applicable.
B2 MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo
tanks are not authorized.
B3 MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo
tanks and DOT 57 portable tanks are not authorized.
B4 MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo
tanks are not authorized.
B5 Only ammonium nitrate solutions with 35 percent or less water that
will remain completely in solution under all conditions of transport at
a maximum lading temperature of 116 [deg]C (240 [deg]F) are authorized
for transport in the following bulk packagings: MC 307, MC 312, DOT 407
and DOT 412 cargo tanks with at least 172 kPa (25 psig) design pressure.
The packaging shall be designed for a working temperature of at least
121 [deg]C (250 [deg]F). Only Specifications MC 304, MC 307 or DOT 407
cargo tank motor vehicles are authorized for transportation by vessel.
B6 Packagings shall be made of steel.
B7 Safety relief devices are not authorized on multi-unit tank car
tanks. Openings for safety relief devices on multi-unit tank car tanks
shall be plugged or blank flanged.
B8 Packagings shall be made of nickel, stainless steel, or steel with
nickel, stainless steel, lead or other suitable corrosion resistant
metallic lining.
B9 Bottom outlets are not authorized.
B10 MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo
tanks, and DOT 57 portable tanks are not authorized.
B11 Tank car tanks must have a test pressure of at least 2,068.5 kPa
(300 psig). Cargo and portable tanks must have a design pressure of at
least 1,207 kPa (175 psig).
B13 A nonspecification cargo tank motor vehicle authorized in Sec.
173.247 of this subchapter must be at least equivalent in design and in
construction to a DOT 406 cargo tank or MC 306 cargo tank (if
constructed before August 31, 1995), except as follows:
a. Packagings equivalent to MC 306 cargo tanks are excepted from the
certification, venting, and emergency flow requirements of the MC 306
specification.
b. Packagings equivalent to DOT 406 cargo tanks are excepted from
Sec. Sec. 178.345-7(d)(5), circumferential reinforcements; 178.345-10,
pressure relief; 178.345-11, outlets; 178.345-14, marking, and 178.345-
15, certification.
c. Packagings are excepted from the design stress limits at elevated
temperatures, as described in Section VIII of the ASME Code (IBR, see
Sec. 171.7 of this subchapter). However, the design stress limits may
not exceed 25 percent of the stress for 0 temper at the maximum design
temperature of the cargo tank, as specified in the Aluminum
Association's ``Aluminum Standards and Data'' (IBR, see Sec. 171.7 of
this subchapter).
B14 Each bulk packaging, except a tank car or a multi-unit-tank car
tank, must be insulated with an insulating material so that the overall
thermal conductance at 15.5 [deg]C (60 [deg]F) is no more than 1.5333
kilojoules per
[[Page 363]]
hour per square meter per degree Celsius (0.075 Btu per hour per square
foot per degree Fahrenheit) temperature differential. Insulating
materials must not promote corrosion to steel when wet.
B15 Packagings must be protected with non-metallic linings impervious to
the lading or have a suitable corrosion allowance.
B16 The lading must be completely covered with nitrogen, inert gas or
other inert materials.
B18 Open steel hoppers or bins are authorized.
B23 Tanks must be made of steel that is rubber lined or unlined. Unlined
tanks must be passivated before being placed in service. If unlined
tanks are washed out with water, they must be repassivated prior to
return to service. Lading in unlined tanks must be inhibited so that the
corrosive effect on steel is not greater than that of hydrofluoric acid
of 65 percent concentration.
B25 Packagings must be made from monel or nickel or monel-lined or
nickel-lined steel.
B26 Tanks must be insulated. Insulation must be at least 100 mm (3.9
inches) except that the insulation thickness may be reduced to 51 mm (2
inches) over the exterior heater coils. Interior heating coils are not
authorized. The packaging may not be loaded with a material outside of
the packaging's design temperature range. In addition, the material also
must be covered with an inert gas or the container must be filled with
water to the tank's capacity. After unloading, the residual material
also must be covered with an inert gas or the container must be filled
with water to the tank's capacity.
B27 Tanks must have a service pressure of 1,034 kPa (150 psig). Tank car
tanks must have a test pressure rating of 1,379 kPa (200 psig). Lading
must be blanketed at all times with a dry inert gas at a pressure not to
exceed 103 kPa (15 psig).
B28 Packagings must be made of stainless steel.
B30 MC 312, MC 330, MC 331 and DOT 412 cargo tanks and DOT 51 portable
tanks must be made of stainless steel, except that steel other than
stainless steel may be used in accordance with the provisions of Sec.
173.24b(b) of this subchapter. Thickness of stainless steel for tank
shell and heads for cargo tanks and portable tanks must be the greater
of 7.62 mm (0.300 inch) or the thickness required for a tank with a
design pressure at least equal to 1.5 times the vapor pressure of the
lading at 46 [deg]C (115 [deg]F). In addition, MC 312 and DOT 412 cargo
tank motor vehicles must:
a. Be ASME Code (U) stamped for 100% radiography of all pressure-
retaining welds;
b. Have accident damage protection which conforms with Sec.
178.345-8 of this subchapter;
c. Have a MAWP or design pressure of at least 87 psig: and
d. Have a bolted manway cover.
B32 MC 312, MC 330, MC 331, DOT 412 cargo tanks and DOT 51 portable
tanks must be made of stainless steel, except that steel other than
stainless steel may be used in accordance with the provisions of Sec.
173.24b(b) of this subchapter. Thickness of stainless steel for tank
shell and heads for cargo tanks and portable tanks must be the greater
of 6.35 mm (0.250 inch) or the thickness required for a tank with a
design pressure at least equal to 1.3 times the vapor pressure of the
lading at 46 [deg]C (115 [deg]F). In addition, MC 312 and DOT 412 cargo
tank motor vehicles must:
a. Be ASME Code (U) stamped for 100% radiography of all pressure-
retaining welds;
b. Have accident damage protection which conforms with Sec. 178.345-8
of this subchapter;
c. Have a MAWP or design pressure of at least 87 psig; and
d. Have a bolted manway cover.
B33 MC 300, MC 301, MC 302, MC 303, MC 305, MC 306, and DOT 406 cargo
tanks equipped with a 1 psig normal vent used to transport gasoline must
conform to Table I of this Special Provision. Based on the volatility
class determined by using ASTM D 439 and the Reid vapor pressure (RVP)
of the particular gasoline, the maximum lading pressure and maximum
ambient temperature permitted during the loading of gasoline may not
exceed that listed in Table I.
Table I--Maximum Ambient Temperature--Gasoline
------------------------------------------------------------------------
Maximum lading and ambient
ASTM D439 volatility class temperature (see note 1)
------------------------------------------------------------------------
A...................................... 131 [deg]F
(RVP <= 9.0 psia)
B...................................... 124 [deg]F
(RVP <= 10.0 psia)
C...................................... 116 [deg]F
(RVP <= 11.5 psia)
D...................................... 107 [deg]F
(RVP <= 13.5 psia)
E...................................... 100 [deg]F
(RVP <= 15.0 psia)
------------------------------------------------------------------------
Note 1: Based on maximum lading pressure of 1 psig at top of cargo tank.
B35 Tank cars containing hydrogen cyanide may be alternatively marked
``Hydrocyanic acid, liquefied'' if otherwise conforming to marking
requirements in subpart D of this part. Tank cars marked ``HYDROCYANIC
ACID'' prior to October 1, 1991 do not need to be remarked.
B42 Tank cars constructed before March 16, 2009, must have a test
pressure of 34.47 Bar
[[Page 364]]
(500 psig) or greater and conform to Class 105J. Each tank car must have
a reclosing pressure relief device having a start-to-discharge pressure
of 10.34 Bar (150 psig). The tank car specification may be marked to
indicate a test pressure of 13.79 Bar (200 psig).
B44 All parts of valves and safety relief devices in contact with lading
must be of a material which will not cause formation of acetylides.
B45 Each tank must have a reclosing combination pressure relief device
equipped with stainless steel or platinum rupture discs approved by the
AAR Tank Car Committee.
B46 The detachable protective housing for the loading and unloading
valves of multi-unit tank car tanks must withstand tank test pressure
and must be approved by the Associate Administrator.
B47 Each tank may have a reclosing pressure relief device having a
start-to-discharge pressure setting of 310 kPa (45 psig).
B48 Portable tanks in sodium metal service may be visually inspected at
least once every 5 years instead of being retested hydrostatically. Date
of the visual inspection must be stenciled on the tank near the other
required markings.
B49 Tanks equipped with interior heater coils are not authorized. Single
unit tank car tanks must have a reclosing pressure relief device having
a start-to-discharge pressure set at no more than 1551 kPa (225 psig).
B52 Notwithstanding the provisions of Sec. 173.24b of this subchapter,
non-reclosing pressure relief devices are authorized on DOT 57 portable
tanks.
B53 Packagings must be made of either aluminum or steel.
B54 Open-top, sift-proof rail cars are also authorized.
B55 Water-tight, sift-proof, closed-top, metal-covered hopper cars,
equipped with a venting arrangement (including flame arrestors) approved
by the Associate Administrator are also authorized.
B56 Water-tight, sift-proof, closed-top, metal-covered hopper cars are
also authorized if the particle size of the hazardous material is not
less than 149 microns.
B57 Class 115A tank car tanks used to transport chloroprene must be
equipped with a non-reclosing pressure relief device of a diameter not
less than 305 mm (12 inches) with a maximum rupture disc pressure of 310
kPa (45 psig).
B59 Water-tight, sift-proof, closed-top, metal-covered hopper cars are
also authorized provided that the lading is covered with a nitrogen
blanket.
B61 Written procedures covering details of tank car appurtenances, dome
fittings, safety devices, and marking, loading, handling, inspection,
and testing practices must be approved by the Associate Administrator
before any single unit tank car tank is offered for transportation.
B65 Tank cars constructed before March 16, 2009, must have a test
pressure of 34.47 Bar (500 psig) or greater and conform to Class 105A.
Each tank car must have a reclosing pressure relief device having a
start-to-discharge pressure of 15.51 Bar (225 psig). The tank car
specification may be marked to indicate a test pressure of 20.68 Bar
(300 psig).
B66 Each tank must be equipped with gas tight valve protection caps.
Outage must be sufficient to prevent tanks from becoming liquid full at
55 [deg]C (130 [deg]F). Specification 110A500W tanks must be stainless
steel.
B67 All valves and fittings must be protected by a securely attached
cover made of metal not subject to deterioration by the lading, and all
valve openings, except safety valve, must be fitted with screw plugs or
caps to prevent leakage in the event of valve failure.
B68 Sodium must be in a molten condition when loaded and allowed to
solidify before shipment. Outage must be at least 5 percent at 98 [deg]C
(208 [deg]F). Bulk packagings must have exterior heating coils fusion
welded to the tank shell which have been properly stress relieved. The
only tank car tanks authorized are Class DOT 105 tank cars having a test
pressure of 2,069 kPa (300 psig) or greater.
B69 Dry sodium cyanide or potassium cyanide may be shipped in the
following sift-proof and weather-resistant packagings: metal covered
hopper cars, covered motor vehicles, portable tanks, or non-
specification bins.
B70 If DOT 103ANW tank car tank is used: All cast metal in contact with
the lading must have 96.7 percent nickel content; and the lading must be
anhydrous and free from any impurities.
B76 Tank cars constructed before March 16, 2009, must have a test
pressure of 20.68 Bar (300 psig) or greater and conform to Class 105S,
112J, 114J or 120S. Each tank car must have a reclosing pressure relief
device having a start-to-discharge pressure of 10.34 Bar (150 psig). The
tank car specification may be marked to indicate a test pressure of
13.79 Bar (200 psig).
B77 Other packaging are authorized when approved by the Associate
Administrator.
B78 Tank cars must have a test pressure of 4.14 Bar (60 psig) or greater
and conform to Class 103, 104, 105, 109, 111, 112, 114 or 120. Heater
pipes must be of welded construction designed for a test pressure of 500
psig. A 25 mm (1 inch) woven lining of asbestos or other approved
material must be placed between the bolster slabbing and the bottom of
the tank. If a tank car tank is
[[Page 365]]
equipped with a non-reclosing pressure relief device, the rupture disc
must be perforated with a 3.2 mm (0.13 inch) diameter hole. If a tank
car tank is equipped with a reclosing pressure relief valve, the tank
must also be equipped with a vacuum relief valve.
B80 Each cargo tank must have a minimum design pressure of 276 kPa (40
psig).
B81 Venting and pressure relief devices for tank car tanks and cargo
tanks must be approved by the Associate Administrator.
B82 Cargo tanks and portable tanks are not authorized.
B83 Bottom outlets are prohibited on tank car tanks transporting
sulfuric acid in concentrations over 65.25 percent.
B84 Packagings must be protected with non-metallic linings impervious to
the lading or have a suitable corrosion allowance for sulfuric acid or
spent sulfuric acid in concentration up to 65.25 percent.
B85 Cargo tanks must be marked with the name of the lading in accordance
with the requirements of Sec. 172.302(b).
B90 Steel tanks conforming or equivalent to ASME specifications which
contain solid or semisolid residual motor fuel antiknock mixture
(including rust, scale, or other contaminants) may be shipped by rail
freight or highway. The tank must have been designed and constructed to
be capable of withstanding full vacuum. All openings must be closed with
gasketed blank flanges or vapor tight threaded closures.
B115 Rail cars, highway trailers, roll-on/roll-off bins, or other non-
specification bulk packagings are authorized. Packagings must be sift-
proof, prevent liquid water from reaching the hazardous material, and be
provided with sufficient venting to preclude dangerous accumulation of
flammable, corrosive, or toxic gaseous emissions such as methane,
hydrogen, and ammonia. The material must be loaded dry.
B116 The use of non specification, sift-proof dump or hopper type
vehicles, and sift-proof roll-on/roll-off bulk bins, which must be
covered by a tarpaulin, metal cover, or equivalent means is authorized
for the transportation of spent bleaching earth by motor vehicle. The
material is also be subject to operational controls which include not
exceeding a temperature of 55C (130F) at the time it is offered or
during transportation, not exceeding a transportation time of 24 hours,
and drivers transporting spent bleaching earth must be trained in the
properties and hazards of the spent bleaching earth. This training must
be documented in training records required by Sec. 172.704(d).
B120 The use of flexible bulk containers conforming to the requirements
in subpart R and subpart S of part 178 of this subchapter is permitted.
B130 When transported by motor vehicle, used diatomaceous earth filter
material is not subject to any other requirements of this subchapter
except for the shipping paper requirements of subpart C of part 172 of
this subchapter; emergency response information as required by Sec.
172.602(a)(2) through (a)(7) of this subchapter; and the marking
requirements of Sec. 172.302 of this subchapter, if the following
requirements are met:
a. Packagings are non-DOT specification sift-proof motor vehicles or
sift-proof roll-on/roll-off bulk bins, which are covered by a tarpaulin
or other equivalent means.
b. The temperature of the material at the time it is offered for
transport and during transportation may not exceed 55 [deg]C (130
[deg]F).
c. The time between offering the material for transportation at the
point of origin, and unloading the material at the destination does not
exceed 48 hours.
d. In addition to the training requirements prescribed in Sec. Sec.
172.700 through 172.704, each driver must be trained regarding the
properties and hazards of diatomaceous earth filter material,
precautions to ensure safe transport of the material, and actions to be
taken in the event of an emergency during transportation, or a
substantial delay in transit.
B131 When transported by highway, rail, or cargo vessel, waste Paint and
Paint related material (UN1263; PG II and PG III), when in plastic or
metal inner packagings of not more than 26.5 L (7 gallons), are excepted
from the marking requirements in Sec. 172.301(a) and (c) and the
labeling requirements in Sec. 172.400(a), when further packed in the
following specification and non-specification bulk outer packagings and
under the following conditions:
a. Primary receptacles must conform to the general packaging
requirements of subpart B of part 173 of this subchapter and may not
leak. If they do leak, they must be overpacked in packagings conforming
to the specification requirements of part 178 of this subchapter or in
salvage packagings conforming to the requirements in Sec. 173.12 of
this subchapter.
b. Primary receptacles must be further packed in non-specification
bulk outer packagings such as cubic yard boxes, plastic rigid-wall bulk
containers, dump trailers, and roll-off containers. Bulk outer
packagings must be liquid tight through design or by the use of lining
materials.
c. Primary receptacles may also be further packed in specification
bulk outer packagings. Authorized specification bulk outer packagings
are UN11G fiberboard
[[Page 366]]
intermediate bulk containers (IBC) and UN13H4 woven plastic, coated and
with liner flexible intermediate bulk containers (FIBCs) meeting the
Packing Group II performance level and lined with a plastic liner of at
least 6 mil thickness.
d. All inner packagings placed inside bulk outer packagings must be
blocked and braced to prevent movement during transportation that could
cause the container to open or fall over. Specification IBCs and FIBCs
are to be secured to a pallet.
B132 Except for transportation by aircraft, UN2813, Water reactive
solid, n.o.s. (contains magnesium, magnesium nitrides) in PG II or III
may be packaged in sift-proof bulk packagings that prevent liquid from
reaching the hazardous material with sufficient venting to preclude
dangerous accumulation of flammable, corrosive or toxic gaseous
emissions such as methane, hydrogen and ammonia.
B133 Hydrochloric acid concentration not exceeding 38%, in Packing Group
II, is authorized to be packaged in UN31H1 or UN31HH1 intermediate bulk
containers when loaded in accordance with the requirements of Sec.
173.35(h) of this subchapter.
B134 For Large Packagings offered for transport by vessel, flexible or
fibre inner packagings shall be sift-proof and water-resistant or shall
be fitted with a sift-proof and water-resistant liner.
B135 For Large Packagings offered for transport by vessel, flexible or
fibre inner packagings shall be hermetically sealed.
(4) IB Codes and IP Codes. These provisions apply only to
transportation in IBCs and Large Packagings. Table 1 authorizes IBCs for
specific proper shipping names through the use of IB Codes assigned in
the Sec. 172.101 table of this subchapter. Table 2 defines IP Codes on
the use of IBCs that are assigned to specific commodities in the Sec.
172.101 Table of this subchapter. Table 3 authorizes Large Packagings
for specific proper shipping names through the use of IB Codes assigned
in the Sec. 172.101 table of this subchapter. Large Packagings are
authorized for the Packing Group III entries of specific proper shipping
names when either special provision IB3 or IB8 is assigned to that entry
in the Sec. 172.101 Table. When no IB code is assigned in the Sec.
172.101 Table for a specific proper shipping name, or in Sec. 173.185
or Sec. 173.225(e) Organic Peroxide Table for Type F organic peroxides,
use of an IBC or Large Packaging for the material may be authorized when
approved by the Associate Administrator. The letter ``Z'' shown in the
marking code for composite IBCs must be replaced with a capital code
letter designation found in Sec. 178.702(a)(2) of this subchapter to
specify the material used for the other packaging. Tables 1, 2, and 3
follow:
Table 1--IB Codes (IBC Codes)
------------------------------------------------------------------------
IBC code Authorized IBCs
------------------------------------------------------------------------
IB1...................... Authorized IBCs: Metal (31A, 31B and 31N).
Additional Requirement: Only liquids with a
vapor pressure less than or equal to 110 kPa
at 50 [deg]C (1.1 bar at 122 [deg]F), or 130
kPa at 55 [deg]C (1.3 bar at 131 [deg]F) are
authorized.
IB2...................... Authorized IBCs: Metal (31A, 31B and 31N);
Rigid plastics (31H1 and 31H2); Composite
(31HZ1).
Additional Requirement: Only liquids with a
vapor pressure less than or equal to 110 kPa
at 50 [deg]C (1.1 bar at 122 [deg]F), or 130
kPa at 55 [deg]C (1.3 bar at 131 [deg]F) are
authorized.
IB3...................... Authorized IBCs: Metal (31A, 31B and 31N);
Rigid plastics (31H1 and 31H2); Composite
(31HZ1 and 31HA2, 31HB2, 31HN2, 31HD2 and
31HH2).
Additional Requirement: Only liquids with a
vapor pressure less than or equal to 110 kPa
at 50 [deg]C (1.1 bar at 122 [deg]F), or 130
kPa at 55 [deg]C (1.3 bar at 131 [deg]F) are
authorized, except for UN2672 (also see
special provision IP8 in Table 2 for
UN2672).
IB4...................... Authorized IBCs: Metal (11A, 11B, 11N, 21A,
21B, 21N, 31A, 31B and 31N).
IB5...................... Authorized IBCs: Metal (11A, 11B, 11N, 21A,
21B, 21N, 31A, 31B and 31N); Rigid plastics
(11H1, 11H2, 21H1, 21H2, 31H1 and 31H2);
Composite (11HZ1, 21HZ1 and 31HZ1).
IB6...................... Authorized IBCs: Metal (11A, 11B, 11N, 21A,
21B, 21N, 31A, 31B and 31N); Rigid plastics
(11H1, 11H2, 21H1, 21H2, 31H1 and 31H2);
Composite (11HZ1, 11HZ2, 21HZ1, 21HZ2 and
31HZ1).
Additional Requirement: Composite IBCs 11HZ2
and 21HZ2 may not be used when the hazardous
materials being transported may become
liquid during transport.
IB7...................... Authorized IBCs: Metal (11A, 11B, 11N, 21A,
21B, 21N, 31A, 31B and 31N); Rigid plastics
(11H1, 11H2, 21H1, 21H2, 31H1 and 31H2);
Composite (11HZ1, 11HZ2, 21HZ1, 21HZ2 and
31HZ1); Wooden (11C, 11D and 11F).
Additional Requirement: Liners of wooden IBCs
must be sift-proof.
IB8...................... Authorized IBCs: Metal (11A, 11B, 11N, 21A,
21B, 21N, 31A, 31B and 31N); Rigid plastics
(11H1, 11H2, 21H1, 21H2, 31H1 and 31H2 );
Composite (11HZ1, 11HZ2, 21HZ1, 21HZ2 and
31HZ1); Fiberboard (11G); Wooden (11C, 11D
and 11F); Flexible (13H1, 13H2, 13H3, 13H4,
13H5, 13L1, 13L2, 13L3, 13L4, 13M1 or 13M2).
IB9...................... IBCs are only authorized if approved by the
Associate Administrator.
------------------------------------------------------------------------
[[Page 367]]
Table 2--IP Codes
------------------------------------------------------------------------
IP code
------------------------------------------------------------------------
IP1...................... IBCs must be packed in closed freight
containers or a closed transport vehicle.
IP2...................... When IBCs other than metal or rigid plastics
IBCs are used, they must be offered for
transportation in a closed freight container
or a closed transport vehicle.
IP3...................... Flexible IBCs must be sift-proof and water-
resistant or must be fitted with a sift-
proof and water-resistant liner.
IP4...................... Flexible, fiberboard or wooden IBCs must be
sift-proof and water-resistant or be fitted
with a sift-proof and water-resistant liner.
IP5...................... IBCs must have a device to allow venting. The
inlet to the venting device must be located
in the vapor space of the IBC under maximum
filling conditions.
IP6...................... Non-specification bulk bins are authorized.
IP7...................... For UN identification numbers 1327, 1363,
1364, 1365, 1386, 1841, 2211, 2217, 2793 and
3314, IBCs are not required to meet the IBC
performance tests specified in part 178,
subpart N, of this subchapter.
IP8...................... Ammonia solutions may be transported in rigid
or composite plastic IBCs (31H1, 31H2 and
31HZ1) that have successfully passed,
without leakage or permanent deformation,
the hydrostatic test specified in Sec.
178.814 of this subchapter at a test
pressure that is not less than 1.5 times the
vapor pressure of the contents at 55 [deg]C
(131 [deg]F).
IP13..................... Transportation by vessel in IBCs is
prohibited.
IP14..................... Air must be eliminated from the vapor space
by nitrogen or other means.
IP15..................... For UN2031 with more than 55% nitric acid,
rigid plastic IBCs and composite IBCs with a
rigid plastic inner receptacle are
authorized for two years from the date of
IBC manufacture.
IP16..................... IBCs of type 31A and 31N are only authorized
if approved by the Associate Administrator.
IP19..................... For UN identification numbers 3531, 3532,
3533, and 3534, IBCs must be designed and
constructed to permit the release of gas or
vapor to prevent a build-up of pressure that
could rupture the IBCs in the event of loss
of stabilization.
IP20..................... Dry sodium cyanide or potassium cyanide is
also permitted in siftproof, water-
resistant, fiberboard IBCs when transported
in closed freight containers or transport
vehicles.
IP21..................... When transported by vessel, flexible,
fiberboard or wooden IBCs must be sift-proof
and water-resistant or be fitted with a sift-
proof and water-resistant liner.
------------------------------------------------------------------------
Table 3--IB Codes
[Large packaging authorizations]
------------------------------------------------------------------------
Authorized Large Packagings (LIQUIDS)
IB3 (PG III materials only) \2\
------------------------------------------------------------------------
Inner packagings: Large outer packagings:
Glass 10 liter............. steel (50A).
Plastics 30 liter.......... aluminum (50B).
Metal 40 liter............. metal other than steel or aluminum
(50N).
rigid plastics (50H).
natural wood (50C).
plywood (50D).
reconstituted wood (50F).
rigid fiberboard (50G).
------------------------------------------------------------------------
IB8 Authorized Large Packagings (SOLIDS) (PG III materials only) \2\
----------------------------------------------------------------------------------------------------------------
Inner packagings: Large outer packagings:
Glass 10 kg........................ steel (50A).
Plastics 50 kg..................... aluminum (50B).
Metal 50 kg........................ metal other than steel or aluminum (50N).
Paper 50 kg........................ flexible plastics (51H). \1\
Fiber 50 kg........................ rigid plastics (50H).
natural wood (50C).
plywood (50D).
reconstituted wood (50F).
rigid fiberboard (50G).
----------------------------------------------------------------------------------------------------------------
\1\ Flexible plastic (51H) Large Packagings are only authorized for use with flexible inner packagings.
\2\ Except when authorized under Special Provision 41.
(5) ``N'' codes. These provisions apply only to non-bulk packagings:
Code/Special Provisions
N3 Glass inner packagings are permitted in combination or composite
packagings only
[[Page 368]]
if the hazardous material is free from hydrofluoric acid.
N4 For combination or composite packagings, glass inner packagings,
other than ampoules, are not permitted.
N5 Glass materials of construction are not authorized for any part of a
packaging which is normally in contact with the hazardous material.
N6 Battery fluid packaged with electric storage batteries, wet or dry,
must conform to the packaging provisions of Sec. 173.159 (g) or (h) of
this subchapter.
N7 The hazard class or division number of the material must be marked on
the package in accordance with Sec. 172.302 of this subchapter.
However, the hazard label corresponding to the hazard class or division
may be substituted for the marking.
N8 Nitroglycerin solution in alcohol may be transported under this entry
only when the solution is packed in metal cans of not more than 1 L
capacity each, overpacked in a wooden box containing not more than 5 L.
Metal cans must be completely surrounded with absorbent cushioning
material. Wooden boxes must be completely lined with a suitable material
impervious to water and nitroglycerin.
N11 This material is excepted for the specification packaging
requirements of this subchapter if the material is packaged in strong,
tight non-bulk packaging meeting the requirements of subparts A and B of
part 173 of this subchapter.
N12 Plastic packagings are not authorized.
N20 A 5M1 multi-wall paper bag is authorized if transported in a closed
transport vehicle.
N25 Steel single packagings are not authorized.
N32 Aluminum materials of construction are not authorized for single
packagings.
N33 Aluminum drums are not authorized.
N34 Aluminum construction materials are not authorized for any part of a
packaging which is normally in contact with the hazardous material.
N36 Aluminum or aluminum alloy construction materials are permitted only
for halogenated hydrocarbons that will not react with aluminum.
N37 This material may be shipped in an integrally-lined fiber drum (1G)
which meets the general packaging requirements of subpart B of part 173
of this subchapter, the requirements of part 178 of this subchapter at
the packing group assigned for the material and to any other special
provisions of column 7 of the Sec. 172.101 table.
N40 This material is not authorized in the following packagings:
a. A combination packaging consisting of a 4G fiberboard box with
inner receptacles of glass or earthenware;
b. A single packaging of a 4C2 sift-proof, natural wood box; or
c. A composite packaging 6PG2 (glass, porcelain or stoneware
receptacles within a fiberboard box).
N41 Metal construction materials are not authorized for any part of a
packaging which is normally in contact with the hazardous material.
N42 1A1 drums made of carbon steel with thickness of body and heads of
not less than 1.3 mm (0.050 inch) and with a corrosion-resistant
phenolic lining are authorized for stabilized benzyl chloride if tested
and certified to the Packing Group I performance level at a specific
gravity of not less than 1.8.
N43 Metal drums are permitted as single packagings only if constructed
of nickel or monel.
N45 Copper cartridges are authorized as inner packagings if the
hazardous material is not in dispersion.
N65 Outage must be sufficient to prevent cylinders or spheres from
becoming liquid full at 55 [deg]C (130 [deg]F). The vacant space
(outage) may be charged with a nonflammable nonliquefied compressed gas
if the pressure in the cylinder or sphere at 55 [deg]C (130 [deg]F) does
not exceed 125 percent of the marked service pressure.
N73 Packagings consisting of outer wooden or fiberboard boxes with inner
glass, metal or other strong containers; metal or fiber drums; kegs or
barrels; or strong metal cans are authorized and need not conform to the
requirements of part 178 of this subchapter.
N74 Packages consisting of tightly closed inner containers of glass,
earthenware, metal or polyethylene, capacity not over 0.5 kg (1.1
pounds) securely cushioned and packed in outer wooden barrels or wooden
or fiberboard boxes, not over 15 kg (33 pounds) net weight, are
authorized and need not conform to the requirements of part 178 of this
subchapter.
N75 Packages consisting of tightly closed inner packagings of glass,
earthenware or metal, securely cushioned and packed in outer wooden
barrels or wooden or fiberboard boxes, capacity not over 2.5 kg (5.5
pounds) net weight, are authorized and need not conform to the
requirements of part 178 of this subchapter.
N76 For materials of not more than 25 percent active ingredient by
weight, packages consisting of inner metal packagings not greater than
250 mL (8 ounces) capacity each, packed in strong outer packagings
together with sufficient absorbent material to completely absorb the
liquid contents are authorized and need not conform to the requirements
of part 178 of this subchapter.
[[Page 369]]
N77 For materials of not more than two percent active ingredients by
weight, packagings need not conform to the requirements of part 178 of
this subchapter, if liquid contents are absorbed in an inert material.
N78 Packages consisting of inner glass, earthenware, or polyethylene or
other nonfragile plastic bottles or jars not over 0.5 kg (1.1 pounds)
capacity each, or metal cans not over five pounds capacity each, packed
in outer wooden boxes, barrels or kegs, or fiberboard boxes are
authorized and need not conform to the requirements of part 178 of this
subchapter. Net weight of contents in fiberboard boxes may not exceed 29
kg (64 pounds). Net weight of contents in wooden boxes, barrels or kegs
may not exceed 45 kg (99 pounds).
N79 Packages consisting of tightly closed metal inner packagings not
over 0.5 kg (1.1 pounds) capacity each, packed in outer wooden or
fiberboard boxes, or wooden barrels, are authorized and need not conform
to the requirements of part 178 of this subchapter. Net weight of
contents may not exceed 15 kg (33 pounds).
N80 Packages consisting of one inner metal can, not over 2.5 kg (5.5
pounds) capacity, packed in an outer wooden or fiberboard box, or a
wooden barrel, are authorized and need not conform to the requirements
of part 178 of this subchapter.
N82 See Sec. 173.115 of this subchapter for classification criteria for
flammable aerosols.
N83 This material may not be transported in quantities of more than 11.5
kg (25.4 lbs) per package.
N84 The maximum quantity per package is 500 g (1.1 lbs.).
N85 Packagings certified at the Packing Group I performance level may
not be used.
N86 UN pressure receptacles made of aluminum alloy are not authorized.
N87 The use of copper valves on UN pressure receptacles is prohibited.
N88 Any metal part of a UN pressure receptacle in contact with the
contents may not contain more than 65% copper, with a tolerance of 1%.
N89 When steel UN pressure receptacles are used, only those bearing the
``H'' mark are authorized.
N90 Metal packagings are not authorized. Packagings of other material
with a small amount of metal, for example metal closures or other metal
fittings such as those mentioned in part 178 of this subchapter, are not
considered metal packagings. Packagings of other material constructed
with a small amount of metal must be designed such that the hazardous
material does not contact the metal.
N91 The use of a non specification sift-proof, non-bulk, metal can with
or without lid, or a non specification sift-proof, non-bulk fiber drum,
with or without lid is authorized when transporting coal tar pitch
compounds by motor vehicle or rail freight. The fiber drum must to be
fabricated with a three ply wall, as a minimum. The coal tar pitch
compound must be in a solid mass during transportation.
N92 Notwithstanding the provisions of Sec. 173.24(g) of this
subchapter, packagings shall be designed and constructed to permit the
release of gas or vapor to prevent a build-up of pressure that could
rupture the packagings in the event of loss of stabilization.
N95 UN1075, Liquefied petroleum gas and UN1978, Propane authorized for
transport in DOT 4BA240 cylinders is not subject to the UN
identification number and proper shipping name marking or the label
requirements of this part subject to the following conditions:
a. The cylinder must be transported in a closed motor vehicle
displaying FLAMMABLE GAS placards in accordance with subpart F of part
172 of this subchapter.
b. Shipping papers at all times must reflect a correct current
accounting of all cylinders both full and expended.
c. The cylinders are collected and transported by a private or a
contract carrier for reconditioning, reuse or disposal.
(6) ``R'' codes. These provisions apply only to transportation by
rail.
R1 A person who offers for transportation tank cars containing
sulfur, molten or residue of sulfur, molten may reference the Sulfur
Institute's, ``Molten Sulphur Rail Tank Car Guidance document'' (see
Sec. 171.7 of this subchapter) to identify tank cars that may pose a
risk in transportation due to the accumulation of formed, solid sulfur
on the outside of the tank.
(7) ``T'' codes. (i) These provisions apply to the transportation of
hazardous materials in UN portable tanks. Portable tank instructions
specify the requirements applicable to a portable tank when used for the
transportation of a specific hazardous material. These requirements must
be met in addition to the design and construction specifications in part
178 of this subchapter. Portable tank instructions T1 through T22
specify the applicable minimum test pressure, the minimum shell
thickness (in reference steel), bottom opening requirements and pressure
relief requirements. Liquefied compressed gases are assigned to portable
tank instruction T50. Refrigerated liquefied gases that are authorized
to be
[[Page 370]]
transported in portable tanks are specified in tank instruction T75.
(ii) The following table specifies the portable tank requirements
applicable to ``T'' Codes T1 through T22. Column 1 specifies the ``T''
Code. Column 2 specifies the minimum test pressure, in bar (1 bar = 14.5
psig), at which the periodic hydrostatic testing required by Sec.
180.605 of this subchapter must be conducted. Column 3 specifies the
section reference for minimum shell thickness or, alternatively, the
minimum shell thickness value. Column 4 specifies the applicability of
Sec. 178.275(g)(3) of this subchapter for the pressure relief devices.
When the word ``Normal'' is indicated, Sec. 178.275(g)(3) of this
subchapter does not apply. Column 5 references applicable requirements
for bottom openings in part 178 of this subchapter. ``Prohibited'' means
bottom openings are prohibited, and ``Prohibited for liquids'' means
bottom openings are authorized for solid material only. The table
follows:
Table of Portable Tank T Codes T1-T22
[Portable tank codes T1-T22 apply to liquid and solid hazardous materials of Classes 3 through 9 which are
transported in portable tanks.]
----------------------------------------------------------------------------------------------------------------
Pressure-relief
Portable tank Minimum test Minimum shell thickness (in requirements (See Bottom opening requirements
instruction (1) pressure mm-reference steel) (See Sec. Sec. 178.275(g)) (See Sec. 178.275(d)) (5)
(bar) (2) 178.274(d)) (3) (4)
----------------------------------------------------------------------------------------------------------------
T1............... 1.5 Sec. 178.274(d)(2) Normal............. Sec. 178.275(d)(2)
T2............... 1.5 Sec. 178.274(d)(2) Normal............. Sec. 178.275(d)(3)
T3............... 2.65 Sec. 178.274(d)(2) Normal............. Sec. 178.275(d)(2)
T4............... 2.65 Sec. 178.274(d)(2) Normal............. Sec. 178.275(d)(3)
T5............... 2.65 Sec. 178.274(d)(2) Sec. Prohibited
178.275(g)(3).
T6............... 4 Sec. 178.274(d)(2) Normal............. Sec. 178.275(d)(2)
T7............... 4 Sec. 178.274(d)(2) Normal............. Sec. 178.275(d)(3)
T8............... 4 Sec. 178.274(d)(2) Normal............. Prohibited
T9............... 4 6 mm Normal............. Prohibited for liquids.
T10.............. 4 6 mm Sec. Prohibited
178.275(g)(3).
T11.............. 6 Sec. 178.274(d)(2) Normal............. Sec. 178.275(d)(3)
T12.............. 6 Sec. 178.274(d)(2) Sec. Sec. 178.275(d)(3)
178.275(g)(3).
T13.............. 6 6 mm Normal............. Prohibited
T14.............. 6 6 mm Sec. Prohibited
178.275(g)(3).
T15.............. 10 Sec. 178.274(d)(2) Normal............. Sec. 178.275(d)(3)
T16.............. 10 Sec. 178.274(d)(2) Sec. Sec. 178.275(d)(3)
178.275(g)(3).
T17.............. 10 6 mm Normal............. Sec. 178.275(d)(3)
T18.............. 10 6 mm Sec. Sec. 178.275(d)(3)
178.275(g)(3).
T19.............. 10 6 mm Sec. Prohibited
178.275(g)(3).
T20.............. 10 8 mm Sec. Prohibited
178.275(g)(3).
T21.............. 10 10 mm Normal............. Prohibited for liquids.
Sec. 178.275(d)(2).
T22.............. 10 10 mm Sec. Prohibited
178.275(g)(3).
----------------------------------------------------------------------------------------------------------------
(iii) T50 When portable tank instruction T50 is indicated in Column
(7) of the Sec. 172.101 Hazardous Materials Table, the applicable
liquefied compressed gas and chemical under pressure descriptions are
authorized to be transported in portable tanks in accordance with the
requirements of Sec. 173.313 of this subchapter.
(iv) T75. When portable tank instruction T75 is referenced in Column
(7) of the Sec. 172.101 Table, the applicable refrigerated liquefied
gases are authorized to be transported in portable tanks in accordance
with the requirements of Sec. 178.277 of this subchapter.
(v) UN and IM portable tank codes/special provisions. When a
specific portable tank instruction is specified by a ``T'' Code in
Column (7) of the Sec. 172.101 Table for a specific hazardous material,
a specification portable tank conforming to an alternative tank
instruction may be used if:
(A) The alternative portable tank has a higher or equivalent test
pressure (for example, 4 bar when 2.65 bar is specified);
(B) The alternative portable tank has greater or equivalent wall
thickness (for example, 10 mm when 6 mm is specified);
(C) The alternative portable tank has a pressure relief device as
specified in
[[Page 371]]
the ``T'' Code. If a frangible disc is required in series with the
reclosing pressure relief device for the specified portable tank, the
alternative portable tank must be fitted with a frangible disc in series
with the reclosing pressure relief device; and
(D) With regard to bottom openings--
(1) When two effective means are specified, the alternative portable
tank is fitted with bottom openings having two or three effective means
of closure or no bottom openings; or
(2) When three effective means are specified, the portable tank has
no bottom openings or three effective means of closure; or
(3) When no bottom openings are authorized, the alternative portable
tank must not have bottom openings.
(vi) Except when an organic peroxide is authorized under Sec.
173.225(g), if a hazardous material is not assigned a portable tank
``T'' Code, the hazardous material may not be transported in a portable
tank unless approved by the Associate Administrator.
(8) ``TP'' codes. (i) These provisions apply to the transportation
of hazardous materials in IM and UN Specification portable tanks.
Portable tank special provisions are assigned to certain hazardous
materials to specify requirements that are in addition to those provided
by the portable tank instructions or the requirements in part 178 of
this subchapter. Portable tank special provisions are designated with
the abbreviation TP (tank provision) and are assigned to specific
hazardous materials in Column (7) of the Sec. 172.101 Table.
(ii) The following is a list of the portable tank special
provisions:
Code/Special Provisions
TP1 The maximum degree of filling must not exceed the degree of
filling determined by the following:
[GRAPHIC] [TIFF OMITTED] TN21JN01.000
Where:
tr is the maximum mean bulk temperature during transport, and
tf is the temperature in degrees celsius of the
liquid during filling.
TP2 a. The maximum degree of filling must not exceed the degree of
filling determined by the following:
[GRAPHIC] [TIFF OMITTED] TN21JN01.001
Where:
tr is the maximum mean bulk temperature during transport,
tf is the temperature in degrees celsius of the liquid during
filling, and
[alpha] is the mean coefficient of cubical expansion of the liquid
between the mean temperature of the liquid during filling
(tf) and the maximum mean bulk temperature during
transportation (tr) both in degrees celsius.
b. For liquids transported under ambient conditions [alpha] may be
calculated using the formula:
[GRAPHIC] [TIFF OMITTED] TN21JN01.009
Where:
d15 and d50 are the densities (in units of mass
per unit volume) of the liquid at 15 [deg]C (59 [deg]F) and 50
[deg]C (122 [deg]F), respectively.
TP3 The maximum degree of filling (in %) for solids transported
above their melting points and for elevated temperature liquids shall be
determined by the following:
[GRAPHIC] [TIFF OMITTED] TR14JN05.003
Where: df and dr are the mean densities of the
liquid at the mean temperature of the liquid during filling and the
maximum mean bulk temperature during transport respectively.
TP4 The maximum degree of filling for portable tanks must not exceed
90%.
TP5 For a portable tank used for the transport of flammable
refrigerated liquefied gases or refrigerated liquefied oxygen, the
maximum rate at which the portable tank may be filled must not exceed
the liquid flow capacity of the primary pressure relief system rated at
a pressure not exceeding 120 percent of the portable tank's design
pressure. For portable tanks used for the transport of refrigerated
liquefied helium and refrigerated liquefied atmospheric gas (except
oxygen), the maximum rate at which the tank is filled must not exceed
the liquid flow capacity of the pressure relief device rated at 130
percent of the portable tank's design pressure. Except for a portable
tank containing refrigerated liquefied helium, a portable tank shall
have an outage of at least two percent below the inlet of the pressure
relief device or pressure control valve, under
[[Page 372]]
conditions of incipient opening, with the portable tank in a level
attitude. No outage is required for helium.
TP6 The tank must be equipped with a pressure release device which
prevent a tank from bursting under fire engulfment conditions (the
conditions prescribed in CGA pamphlet S-1.2 (see Sec. 171.7 of this
subchapter) or alternative conditions approved by the Associate
Administrator may be used to consider the fire engulfment condition),
taking into account the properties of the hazardous material to be
transported.
TP7 The vapor space must be purged of air by nitrogen or other
means.
TP8 A portable tank having a minimum test pressure of 1.5 bar (150
kPa) may be used when the flash point of the hazardous material
transported is greater than 0 [deg]C (32 [deg]F).
TP9 A hazardous material assigned to special provision TP9 in Column
(7) of the Sec. 172.101 Table may only be transported in a portable
tank if approved by the Associate Administrator.
TP10 The portable tank must be fitted with a lead lining at least 5
mm (0.2 inches) thick. The lead lining must be tested annually to ensure
that it is intact and functional. Another suitable lining material may
be used if approved by the Associate Administrator.
TP12 This material is considered highly corrosive to steel.
TP13 Self-contained breathing apparatus must be provided when this
hazardous material is transported by sea.
TP16 The portable tank must be protected against over and under
pressurization which may be experienced during transportation. The means
of protection must be approved by the approval agency designated to
approve the portable tank in accordance with the procedures in part 107,
subpart E, of this subchapter. The pressure relief device must be
preceded by a frangible disk in accordance with the requirements in
Sec. 178.275(g)(3) of this subchapter to prevent crystallization of the
product in the pressure relief device.
TP17 Only inorganic non-combustible materials may be used for
thermal insulation of the tank.
TP18 The temperature of this material must be maintained between 18
[deg]C (64.4 [deg]F) and 40 [deg]C (104 [deg]F) while in transportation.
Portable tanks containing solidified methacrylic acid must not be
reheated during transportation.
TP19 The calculated wall thickness must be increased by 3 mm at the
time of construction. Wall thickness must be verified ultrasonically at
intervals midway between periodic hydraulic tests (every 2.5 years). The
portable tank must not be used if the wall thickness is less than that
prescribed by the applicable T code in Column (7) of the Table for this
material.
TP20 This hazardous material must only be transported in insulated
tanks under a nitrogen blanket.
TP21 The wall thickness must not be less than 8 mm. Portable tanks
must be hydraulically tested and internally inspected at intervals not
exceeding 2.5 years.
TP22 Lubricants for portable tank fittings (for example, gaskets,
shut-off valves, flanges) must be oxygen compatible.
TP24 The portable tank may be fitted with a device to prevent the
build up of excess pressure due to the slow decomposition of the
hazardous material being transported. The device must be in the vapor
space when the tank is filled under maximum filling conditions. This
device must also prevent an unacceptable amount of leakage of liquid in
the case of overturning.
TP25 Sulphur trioxide 99.95% pure and above may be transported in
tanks without an inhibitor provided that it is maintained at a
temperature equal to or above 32.5 [deg]C (90.5 [deg]F).
TP26 The heating device must be exterior to the shell. For UN 3176,
this requirement only applies when the hazardous material reacts
dangerously with water.
TP27 A portable tank having a minimum test pressure of 4 bar (400
kPa) may be used provided the calculated test pressure is 4 bar or less
based on the MAWP of the hazardous material, as defined in Sec. 178.275
of this subchapter, where the test pressure is 1.5 times the MAWP.
TP28 A portable tank having a minimum test pressure of 2.65 bar (265
kPa) may be used provided the calculated test pressure is 2.65 bar or
less based on the MAWP of the hazardous material, as defined in Sec.
178.275 of this subchapter, where the test pressure is 1.5 times the
MAWP.
TP29 A portable tank having a minimum test pressure of 1.5 bar
(150.0 kPa) may be used provided the calculated test pressure is 1.5 bar
or less based on the MAWP of the hazardous materials, as defined in
Sec. 178.275 of this subchapter, where the test pressure is 1.5 times
the MAWP.
TP30 This hazardous material may only be transported in insulated
tanks.
TP31 This hazardous material may only be transported in tanks in the
solid state.
TP32 Portable tanks may be used subject to the following conditions:
a. Each portable tank constructed of metal must be fitted with a
pressure-relief device consisting of a reclosing spring loaded type, a
frangible disc or a fusible element. The set to discharge for the spring
loaded pressure relief device and the burst pressure for the frangible
disc, as applicable, must not be greater than 2.65 bar for portable
tanks with minimum test pressures greater than 4 bar;
b. The suitability for transport in tanks must be demonstrated using
test 8(d) in Test
[[Page 373]]
Series 8 (see UN Manual of Tests and Criteria, Part 1, Sub-section 18.7)
(IBR, see Sec. 171.7 of this subchapter) or an alternative means
approved by the Associate Administrator.
TP33 The portable tank instruction assigned for this substance
applies for granular and powdered solids and for solids which are filled
and discharged at temperatures above their melting point which are
cooled and transported as a solid mass. Solid substances transported or
offered for transport above their melting point are authorized for
transportation in portable tanks conforming to the provisions of
portable tank instruction T4 for solid substances of packing group III
or T7 for solid substances of packing group II, unless a tank with more
stringent requirements for minimum shell thickness, maximum allowable
working pressure, pressure-relief devices or bottom outlets are assigned
in which case the more stringent tank instruction and special provisions
shall apply. Filling limits must be in accordance with portable tank
special provision TP3. Solids meeting the definition of an elevated
temperature material must be transported in accordance with the
applicable requirements of this subchapter.
TP36 For material assigned this portable tank special provision,
portable tanks used to transport such material may be equipped with
fusible elements in the vapor space of the portable tank.
TP37 IM portable tanks are only authorized for the shipment of
hydrogen peroxide solutions in water containing 72% or less hydrogen
peroxide by weight. Pressure relief devices shall be designed to prevent
the entry of foreign matter, the leakage of liquid and the development
of any dangerous excess pressure. In addition, the portable tank must be
designed so that internal surfaces may be effectively cleaned and
passivated. Each tank must be equipped with pressure relief devices
conforming to the following requirements:
------------------------------------------------------------------------
Total
Concentration of hydrogen per peroxide solution \1\
------------------------------------------------------------------------
52% or less................................................... 11
Over 52%, but not greater than 60%............................ 22
Over 60%, but not greater than 72%............................ 32
------------------------------------------------------------------------
\1\ Total venting capacity in standard cubic feet hour (S.C.F.H.) per
pound of hydrogen peroxide solution.
TP38 Each portable tank must be insulated with an insulating
material so that the overall thermal conductance at 15.5 [deg]C (60
[deg]F) is no more than 1.5333 kilojoules per hour per square meter per
degree Celsius (0.075 Btu per hour per square foot per degree
Fahrenheit) temperature differential. Insulating materials may not
promote corrosion to steel when wet.
TP39 The portable tank instruction T4 prescribed may continue to be
applied until December 31, 2018.
TP40 The portable tank must not be transported when connected with
spray application equipment.
TP41 The portable tank instruction T9 may continue to be applied
until December 31, 2018.
TP44 Each portable tank must be made of stainless steel, except that
steel other than stainless steel may be used in accordance with the
provisions of Sec. 173.24b(b) of this subchapter. Thickness of
stainless steel for tank shell and heads must be the greater of 7.62 mm
(0.300 inch) or the thickness required for a portable tank with a design
pressure at least equal to 1.5 times the vapor pressure of the hazardous
material at 46 [deg]C (115 [deg]F).
TP45 Each portable tank must be made of stainless steel, except that
steel other than stainless steel may be used in accordance with the
provisions of 173.24b(b) of this subchapter. Thickness of stainless
steel for portable tank shells and heads must be the greater of 6.35 mm
(0.250 inch) or the thickness required for a portable tank with a design
pressure at least equal to 1.3 times the vapor pressure of the hazardous
material at 46 [deg]C (115 [deg]F).
TP46 Portable tanks in sodium metal service are not required to be
hydrostatically retested.
TP47 The 2.5 year internal examination may be waived or substituted
by other test methods or inspection procedures specified by the
competent authority or its authorized body, provided that the portable
tank is dedicated to the transport of the organometallic substances to
which this tank special provision is assigned. However this examination
is required when the conditions of Sec. 180.605(f) are met.
(9) ``W'' codes. These provisions apply only to transportation by
water:
Code/Special Provisions
W1 This substance in a non friable prill or granule form is not subject
to the requirements of this subchapter when tested in accordance with
the UN Manual of Test and Criteria (IBR, see Sec. 171.7 of this
subchapter) and is found to not meet the definition or criteria for
inclusion in Division 5.1.
W7 Vessel stowage category for uranyl nitrate hexahydrate solution is
``D'' as defined in Sec. 172.101(k)(4).
W8 Vessel stowage category for pyrophoric thorium metal or pyrophoric
uranium metal is ``D'' as defined in Sec. 172.101(k)(4).
W9 When offered for transportation by water, the following Specification
packagings are not authorized unless approved by the Associate
Administrator: woven plastic bags, plastic film bags, textile bags,
paper bags, IBCs and bulk packagings.
[[Page 374]]
W10 When offered for transportation by vessel, the use of Large
Packagings (see Sec. 171.8 of this subchapter) is prohibited.
W31 Non-bulk packagings must be hermetically sealed.
W32 Non-bulk packagings shall be hermetically sealed, except for solid
fused material.
W40 Non-bulk bags are not allowed.
W41 When offered for transportation by water, this material must be
packaged in bales and be securely and tightly bound with rope, wire or
similar means.
W100 Non-bulk flexible, fibreboard or wooden packagings must be sift-
proof and water-resistant or must be fitted with a sift-proof and water-
resistant liner.
[Amdt. 172-123, 55 FR 52582, Dec. 21, 1990]
Editorial Note: For Federal Register citations affecting Sec.
172.102, see the List of CFR Sections Affected, which appears in the
Finding Aids section of the printed volume and at www.fdsys.gov.
Subpart C_Shipping Papers
Sec. 172.200 Applicability.
(a) Description of hazardous materials required. Except as otherwise
provided in this subpart, each person who offers a hazardous material
for transportation shall describe the hazardous material on the shipping
paper in the manner required by this subpart.
(b) This subpart does not apply to any material, other than a
hazardous substance, hazardous waste or marine pollutant, that is--
(1) Identified by the letter ``A'' in column 1 of the Sec. 172.101
table, except when the material is offered or intended for
transportation by air; or
(2) Identified by the letter ``W'' in column 1 of the Sec. 172.101
table, except when the material is offered or intended for
transportation by water; or
(3) A limited quantity package unless the material is offered for
transportation by aircraft or vessel and, until December 31, 2020, a
package of ORM-D material authorized by this subchapter on October 1,
2010, when offered for transportation by highway, rail or vessel.
(4) Category B infectious substances prepared in accordance with
Sec. 173.199.
[Amdt. 172-29A, 41 FR 40677, Sept. 20, 1976, as amended by Amdt. 172-58,
45 FR 34697, May 22, 1980; Amdt. 172-74, 47 FR 43065, Sept. 30, 1982;
Amdt. 172-112, 53 FR 17160, May 13, 1988; Amdt. 172-127, 57 FR 52938,
Nov. 5, 1992; 71 FR 32258, June 2, 2006; 76 FR 3365, Jan. 19, 2011; 78
FR 1112, Jan. 7, 2013]
Sec. 172.201 Preparation and retention of shipping papers.
(a) Contents. When a description of hazardous material is required
to be included on a shipping paper, that description must conform to the
following requirements:
(1) When a hazardous material and a material not subject to the
requirements of this subchapter are described on the same shipping
paper, the hazardous material description entries required by Sec.
172.202 and those additional entries that may be required by Sec.
172.203:
(i) Must be entered first, or
(ii) Must be entered in a color that clearly contrasts with any
description on the shipping paper of a material not subject to the
requirements of this subchapter, except that a description on a
reproduction of a shipping paper may be highlighted, rather than
printed, in a contrasting color (the provisions of this paragraph apply
only to the basic description required by Sec. 172.202(a)(1), (2), (3),
and (4)), or
(iii) Must be identified by the entry of an ``X'' placed before the
basic shipping description required by Sec. 172.202 in a column
captioned ``HM.'' (The ``X'' may be replaced by ``RQ,'' if appropriate.)
(2) The required shipping description on a shipping paper and all
copies of the shipping paper used for transportation purposes must be
legible and printed (manually or mechanically) in English.
(3) Unless it is specifically authorized or required in this
subchapter, the required shipping description may not contain any code
or abbreviation.
(4) A shipping paper may contain additional information concerning
the material provided the information is not inconsistent with the
required description. Unless otherwise permitted or required by this
subpart, additional
[[Page 375]]
information must be placed after the basic description required by Sec.
172.202(a).
(5) Electronic shipping papers. For transportation by rail, a rail
carrier may accept shipping paper information either telephonically
(i.e., voice communications and facsimiles) or electronically (EDI) from
an offeror of a hazardous materials shipment in accordance with the
provisions in paragraphs (a)(5)(i)-(a)(5)(iv) of this section. See Sec.
171.8 for the EDI definition.
(i) When the information applicable to the consignment is provided
under this requirement the information must be available to the offeror
and carrier at all times during transport, and the carrier must have and
maintain a printed copy of this information until delivery of the
hazardous materials on the shipping paper is complete. When a paper
document is produced, the data must be presented as required by this
subpart.
(ii) The offeror must forward the shipping paper (record) for a
loaded movement to the carrier prior to shipment unless the carrier
prepares the shipping paper on behalf of the offeror. The offeror is
only relieved of the duty to forward the shipping paper once the offeror
has received a copy of the shipping paper from the carrier;
(iii) A carrier that generates a residue shipping paper using
information from the previous loaded movement of a hazardous materials
packaging must ensure the description of the hazardous material that
accompanies the shipment complies with the offeror's request; and
(iv) Verification. The carrier and the offeror must have a procedure
by which the offeror can verify accuracy of the transmitted hazard
communication information that will accompany the shipment.
(b) [Reserved]
(c) Continuation page. A shipping paper may consist of more than one
page, if each page is consecutively numbered and the first page bears a
notation specifying the total number of pages included in the shipping
paper. For example, ``Page 1 of 4 pages.''
(d) Emergency response telephone number. Except as provided in Sec.
172.604(d), a shipping paper must contain an emergency response
telephone number and, if utilizing an emergency response information
telephone number service provider, identify the person (by name or
contract number) who has a contractual agreement with the service
provider, as prescribed in subpart G of this part.
(e) Retention and Recordkeeping. Each person who provides a shipping
paper must retain a copy of the shipping paper required by Sec.
172.200(a), or an electronic image thereof, that is accessible at or
through its principal place of business and must make the shipping paper
available, upon request, to an authorized official of a Federal, State,
or local government agency at reasonable times and locations. For a
hazardous waste, the shipping paper copy must be retained for three
years after the material is accepted by the initial carrier. For all
other hazardous materials, the shipping paper must be retained for two
years after the material is accepted by the initial carrier. Each
shipping paper copy must include the date of acceptance by the initial
carrier, except that, for rail, vessel, or air shipments, the date on
the shipment waybill, airbill, or bill of lading may be used in place of
the date of acceptance by the initial carrier. A motor carrier (as
defined in Sec. 390.5 of subchapter B of chapter III of subtitle B)
using a shipping paper without change for multiple shipments of one or
more hazardous materials having the same shipping name and
identification number may retain a single copy of the shipping paper,
instead of a copy for each shipment made, if the carrier also retains a
record of each shipment made, to include shipping name, identification
number, quantity transported, and date of shipment.
[Amdt. 172-29A, 41 FR 40677, Sept. 20, 1976]
Editorial Note: For Federal Register citations affecting Sec.
172.201, see the List of CFR Sections Affected, which appears in the
Finding Aids section of the printed volume and at www.fdsys.gov.
Sec. 172.202 Description of hazardous material on shipping papers.
(a) The shipping description of a hazardous material on the shipping
paper must include:
[[Page 376]]
(1) The identification number prescribed for the material as shown
in Column (4) of the Sec. 172.101 table;
(2) The proper shipping name prescribed for the material in Column
(2) of the Sec. 172.101 table;
(3) The hazard class or division number prescribed for the material,
as shown in Column (3) of the Sec. 172.101 table. The subsidiary hazard
class or division number is not required to be entered when a
corresponding subsidiary hazard label is not required. Except for
combustible liquids, the subsidiary hazard class(es) or subsidiary
division number(s) must be entered in parentheses immediately following
the primary hazard class or division number. In addition--
(i) The words ``Class'' or ``Division'' may be included preceding
the primary and subsidiary hazard class or division numbers.
(ii) The hazard class need not be included for the entry
``Combustible liquid, n.o.s.''
(iii) For domestic shipments, primary and subsidiary hazard class or
division names may be entered following the numerical hazard class or
division, or following the basic description.
(4) The packing group in Roman numerals, as designated for the
hazardous material in Column (5) of the Sec. 172.101 table. Class 1
(explosives) materials; self-reactive substances; batteries other than
those containing lithium, lithium ions, or sodium; Division 5.2
materials; and entries that are not assigned a packing group (e.g.,
Class 7) are excepted from this requirement. The packing group may be
preceded by the letters ``PG'' (for example, ``PG II''); and
(5) Except for transportation by aircraft, the total quantity of
hazardous materials covered by the description must be indicated (by
mass or volume, or by activity for Class 7 materials) and must include
an indication of the applicable unit of measurement, for example, ``200
kg'' (440 pounds) or ``50 L'' (13 gallons). The following provisions
also apply:
(i) For Class 1 materials, the quantity must be the net explosive
mass. For an explosive that is an article, such as Cartridges, small
arms, the net explosive mass may be expressed in terms of the net mass
of either the article or the explosive materials contained in the
article.
(ii) For hazardous materials in salvage packaging, an estimate of
the total quantity is acceptable.
(iii) The following are excepted from the requirements of paragraph
(a)(5) of this section:
(A) Bulk packages, provided some indication of the total quantity is
shown, for example, ``1 cargo tank'' or ``2 IBCs.''
(B) Cylinders, provided some indication of the total quantity is
shown, for example, ``10 cylinders.''
(C) Packages containing only residue.
(6) For transportation by aircraft, the total net mass per package,
must be shown unless a gross mass is indicated in Columns (9A) or (9B)
of the Sec. 172.101 table in which case the total gross mass per
package must be shown; or, for Class 7 materials, the quantity of
radioactive material must be shown by activity. The following provisions
also apply:
(i) For empty uncleaned packaging, only the number and type of
packaging must be shown;
(ii) For chemical kits and first aid kits, the total net mass of
hazardous materials must be shown. Where the kits contain only liquids,
or solids and liquids, the net mass of liquids within the kits is to be
calculated on a 1 to 1 basis, i.e., 1 L (0.3 gallons) equals 1 kg (2.2
pounds);
(iii) For dangerous goods in machinery or apparatus, the individual
total quantities or an estimate of the individual total quantities of
dangerous goods in solid, liquid or gaseous state, contained in the
article must be shown;
(iv) For dangerous goods transported in a salvage packaging, an
estimate of the quantity of dangerous goods per package must be shown;
(v) For cylinders, total quantity may be indicated by the number of
cylinders, for example, ``10 cylinders;''
(vi) For items where ``No Limit'' is shown in Column (9A) or (9B) of
the Sec. 172.101 table, the quantity shown must be the net mass or
volume of the material. For articles (e.g., UN2800 and UN3166) the
quantity must be the gross mass, followed by the letter ``G''; and
[[Page 377]]
(vii) For hazardous materials in limited quantities, the total net
quantity per package must be shown unless a gross mass is indicated in
Column 4 of Sec. 173.27 Table 3, in which case the total gross mass per
package must be shown. Where different hazardous materials in limited
quantities are packed together in the same outer packaging, when a gross
mass is indicated Column 4 of Sec. 173.27 Table 3, the net quantity of
each hazardous material must be shown in addition to the gross mass of
the completed package.
(viii) For authorized consumer commodities, the information provided
may be either the gross mass of each package or the average gross mass
of the packages.
(7) The number and type of packages must be indicated. The type of
packages must be indicated by description of the package (for example,
``12 drums''). Indication of the packaging specification number
(``1H1'') may be included in the description of the package (for
example, ``12 1H1 drums'' or ``12 drums (UN 1A1)''). Abbreviations may
be used for indicating packaging types (for example, ``cyl.'' for
``cylinder'') provided the abbreviations are commonly accepted and
recognizable.
(b) Except as provided in this subpart, the basic description
specified in paragraphs (a)(1), (2), (3), and (4) of this section must
be shown in sequence with no additional information interspersed. For
example, ``UN2744, Cyclobutyl chloroformate, 6.1, (8, 3), PG II.'' The
shipping description sequences in effect on December 31, 2006, may be
used until January 1, 2013. Shipping descriptions for hazardous
materials offered or intended for transportation by rail that contain
all the information required in this subpart and that are formatted and
ordered in accordance with recognized electronic data interchange
standards and, to the extent possible, in the order and manner required
by this subpart are deemed to comply with this paragraph.
(c)(1) The total quantity of the material covered by one description
must appear before or after, or both before and after, the description
required and authorized by this subpart. The type of packaging and
destination marks may be entered in any appropriate manner before or
after the basic description. Abbreviations may be used to express units
of measurement and types of packagings.
(2) Hazardous materials and hazardous substances transported by
highway considered ``household wastes'' as defined in 40 CFR 261.4, and
not subject to the Environmental Protection Agency's hazardous waste
regulations in 40 CFR parts 262 and 263, are excepted from the
requirements of this paragraph.
(d) Technical and chemical group names may be entered in parentheses
between the proper shipping name and hazard class or following the basic
description. An appropriate modifier, such as ``contains'' or
``containing,'' and/or the percentage of the technical constituent may
also be used. For example: ``UN 1993, Flammable liquids, n.o.s.
(contains Xylene and Benzene), 3, II''.
(e) Except for those materials in the UN Recommendations, the ICAO
Technical Instructions, or the IMDG Code (IBR, see Sec. 171.7 of this
subchapter), a material that is not a hazardous material according to
this subchapter may not be offered for transportation or transported
when its description on a shipping paper includes a hazard class or an
identification number specified in the Sec. 172.101 Table.
[Amdt. 172-101, 45 FR 74665, Nov. 10, 1980]
Editorial Note: For Federal Register citations affecting Sec.
172.202, see the List of CFR Sections Affected, which appears in the
Finding Aids section of the printed volume and at www.fdsys.gov.
Sec. 172.203 Additional description requirements.
(a) Special permits. Except as provided in Sec. 173.23 of this
subchapter, each shipping paper issued in connection with a shipment
made under a special permit must bear the notation ``DOT-SP'' followed
by the special permit number assigned and located so that the notation
is clearly associated with the description to which the special permit
applies. Each shipping paper issued in connection with a shipment made
under an exemption or special permit issued prior to October 1, 2007,
may bear the notation ``DOT-E'' followed by the number assigned and so
located
[[Page 378]]
that the notation is clearly associated with the description to which it
applies.
(b) Limited quantities. When a shipping paper is required by this
subchapter, the description for a material offered for transportation as
``limited quantity,'' as authorized by this subchapter, must include the
words ``Limited Quantity'' or ``Ltd Qty'' following the basic
description.
(c) Hazardous substances. (1) Except for Class 7 (radioactive)
materials described in accordance with paragraph (d) of this section, if
the proper shipping name for a material that is a hazardous substance
does not identify the hazardous substance by name, the name of the
hazardous substance must be entered in parentheses in association with
the basic description. If the material contains two or more hazardous
substances, at least two hazardous substances, including the two with
the lowest reportable quantities (RQs), must be identified. For a
hazardous waste, the waste code (e.g., D001), if appropriate, may be
used to identify the hazardous substance.
(2) The letters ``RQ'' must be entered on the shipping paper either
before or after the basic description required by Sec. 172.202 for each
hazardous substance (see definition in Sec. 171.8 of this subchapter).
For example: ``RQ, UN 1098, Allyl alcohol, 6.1, I, Toxic-inhalation
hazard, Zone B''; or ``UN 3077, Environmentally hazardous substances,
solid, n.o.s., 9, III, RQ (Adipic acid)''.
(d) Radioactive material. The description for a shipment of a Class
7 (radioactive) material must include the following additional entries
as appropriate:
(1) The name of each radionuclide in the Class 7 (radioactive)
material that is listed in Sec. 173.435 of this subchapter. For
mixtures of radionuclides, the radionuclides required to be shown must
be determined in accordance with Sec. 173.433(g) of this subchapter.
Abbreviations, e.g., ``\99\Mo,'' are authorized.
(2) A description of the physical and chemical form of the material:
(i) For special form materials, the words ``special form'' unless
the words ``special form'' already appear in the proper shipping name;
or
(ii) If the material is not in special form, a description of the
physical and chemical form of the material (generic chemical
descriptions are permitted).
(3) The maximum activity of the radioactive contents contained in
each package during transport in terms of the appropriate SI units
(e.g., Becquerels (Bq), Terabecquerels (TBq)). The activity may also be
stated in appropriate customary units (e.g., Curies (Ci), milliCuries
(mCi), microCuries (uCi)) in parentheses following the SI units.
Abbreviations are authorized. Except for plutonium-239 and plutonium-
241, the weight in grams or kilograms of fissile radionuclides (or the
mass of each fissile nuclide for mixtures when appropriate) may be
inserted instead of activity units. For plutonium-239 and plutonium-241,
the weight in grams of fissile radionuclides (or the mass of each
fissile nuclide for mixtures when appropriate) may be inserted in
addition to the activity units.
(4) The category of label applied to each package in the shipment.
For example: ``RADIOACTIVE WHITE-I,'' or ``WHITE-I.''
(5) The transport index assigned to each package in the shipment
bearing RADIOACTIVE YELLOW-II or RADIOACTIVE YELLOW-III labels.
(6) For a package containing fissile Class 7 (radioactive) material:
(i) The words ``Fissile Excepted'' if the package is excepted
pursuant to Sec. 173.453 of this subchapter; or otherwise
(ii) The criticality safety index for that package.
(7) For a package approved by the U.S. Department of Energy (DOE) or
U.S. Nuclear Regulatory Commission (NRC), a notation of the package
identification marking as prescribed in the applicable DOE or NRC
approval (see Sec. 173.471 of the subchapter).
(8) For an export shipment or a shipment in a foreign made package,
a notation of the package identification marking as prescribed in the
applicable International Atomic Energy Agency (IAEA) Certificate of
Competent Authority which has been issued for the package (see Sec.
173.473 of the subchapter).
[[Page 379]]
(9) For a shipment required by this subchapter to be consigned as
exclusive use:
(i) An indication that the shipment is consigned as exclusive use;
or
(ii) If all the descriptions on the shipping paper are consigned as
exclusive use, then the statement ``Exclusive Use Shipment'' may be
entered only once on the shipping paper in a clearly visible location.
(10) For the shipment of a package containing a highway route
controlled quantity of Class 7 (radioactive) materials (see Sec.
173.403 of this subchapter) the words ``Highway route controlled
quantity'' or ``HRCQ'' must be entered in association with the basic
description.
(e) Empty packagings. (1) The description on the shipping paper for
a packaging containing the residue of a hazardous material may include
the words ``RESIDUE: Last Contained * * *'' immediately before or after
the basic shipping description on the shipping paper.
(2) The description on the shipping paper for a tank car containing
the residue of a hazardous material must include the phrase, ``RESIDUE:
LAST CONTAINED * * *'' immediately before or after the basic shipping
description or immediately preceding the proper shipping name of the
material on the shipping paper.
(f) Transportation by air. A statement indicating that the shipment
is within the limitations prescribed for either passenger and cargo
aircraft or cargo aircraft only must be entered on the shipping paper.
(g) Transportation by rail. (1) A shipping paper prepared by a rail
carrier for a rail car, freight container, transport vehicle or portable
tank that contains hazardous materials must include the reporting mark
and number when displayed on the rail car, freight container, transport
vehicle or portable tank.
(2) The shipping paper for each DOT-113 tank car containing a
Division 2.1 material or its residue must contain an appropriate
notation, such as ``DOT 113'', and the statement ``Do not hump or cut
off car while in motion.''
(3) When shipments of elevated temperature materials are transported
under the exception permitted in Sec. 173.247(h)(3) of this subchapter,
the shipping paper must contain an appropriate notation, such as
``Maximum operating speed 15 mph.''.
(h) Transportation by highway. Following the basic description for a
hazardous material in a Specification MC 330 or MC 331 cargo tank, there
must be entered for--
(1) Anhydrous ammonia. (i) The words ``0.2 PERCENT WATER'' to
indicate the suitability for shipping anhydrous ammonia in a cargo tank
made of quenched and tempered steel as authorized by Sec. 173.315(a),
Note 14 of this subchapter, or
(ii) The words ``NOT FOR Q and T TANKS'' when the anhydrous ammonia
does not contain 0.2 percent or more water by weight.
(2) Liquefied petroleum gas. (i) The word ``NONCORROSIVE'' or
``NONCOR'' to indicate the suitability for shipping ``Noncorrosive''
liquefied petroleum gas in a cargo tank made of quenched and tempered
steel as authorized by Sec. 173.315(a), Note 15 of this subchapter, or
(ii) The words ``NOT FOR Q and T TANKS'' for grades of liquefied
petroleum gas other than ``Noncorrosive''.
(i) Transportation by water. Each shipment by water must have the
following additional shipping paper entries:
(1) The name of the shipper.
(2) Minimum flashpoint if 60 [deg]C (140 [deg]F) or below (in [deg]C
closed cup (c.c.)) in association with the basic description. For lab
packs packaged in conformance with Sec. 173.12(b) of this subchapter,
an indication that the lowest flashpoint of all hazardous materials
contained in the lab pack is below 23 [deg]C or that the flash point is
not less than 23 [deg]C but not more than 60 [deg]C must be identified
on the shipping paper in lieu of the minimum flashpoint.
(3) For a hazardous material consigned under an ``n.o.s.'' entry not
included in the segregation groups listed in section 3.1.4 of the IMDG
Code (IBR see Sec. 171.7 of this subchapter) but belonging, in the
opinion of the consignor, to one of these groups, the appropriate
segregation group must be
[[Page 380]]
shown in association with the basic description (for example, IMDG Code
segregation group--1 Acids). When no segregation group is applicable,
there is no requirement to indicate that condition.
(j) [Reserved]
(k) Technical names for ``n.o.s.'' and other generic descriptions.
Unless otherwise excepted, if a material is described on a shipping
paper by one of the proper shipping names identified by the letter ``G''
in column (1) of the Sec. 172.101 Table, the technical name of the
hazardous material must be entered in parentheses in association with
the basic description. For example ``UN 1760, Corrosive liquid, n.o.s.,
(Octanoyl chloride), 8, II'', or ``UN 1760, Corrosive liquid, n.o.s., 8,
II (contains Octanoyl chloride)''. The word ``contains'' may be used in
association with the technical name, if appropriate. For organic
peroxides which may qualify for more than one generic listing depending
on concentration, the technical name must include the actual
concentration being shipped or the concentration range for the
appropriate generic listing. For example, ``UN 3102, Organic peroxide
type B, solid, 5.2, (dibenzoyl peroxide, 52-100%)'' or ``UN 3108,
Organic peroxide type E, solid, 5.2, (dibenzoyl peroxide, paste,
<52%)''. Shipping descriptions for toxic materials that meet the
criteria of Division 6.1, PG I or II (as specified in Sec. 173.132(a)
of this subchapter) or Division 2.3 (as specified in Sec. 173.115(c) of
this subchapter) and are identified by the letter ``G'' in column (1) of
the Sec. 172.101 Table, must have the technical name of the toxic
constituent entered in parentheses in association with the basic
description. A material classed as Division 6.2 and assigned
identification number UN 2814 or UN 2900 that is suspected to contain an
unknown Category A infectious substance must have the words ``suspected
Category A infectious substance'' entered in parentheses in place of the
technical name as part of the proper shipping description. For
additional technical name options, see the definition for ``Technical
name'' in Sec. 171.8. A technical name should not be marked on the
outer package of a Division 6.2 material (see Sec. 172.301(b)).
(1) If a hazardous material is a mixture or solution of two or more
hazardous materials, the technical names of at least two components most
predominately contributing to the hazards of the mixture or solution
must be entered on the shipping paper as required by paragraph (k) of
this section. For example, ``UN 2924, Flammable liquid, corrosive,
n.o.s., 3 (8), II (contains Methanol, Potassium hydroxide)''.
(2) The provisions of this paragraph do not apply--
(i) To a material that is a hazardous waste and described using the
proper shipping name ``Hazardous waste, liquid or solid, n.o.s.'',
classed as a miscellaneous Class 9, provided the EPA hazardous waste
number is included on the shipping paper in association with the basic
description, or provided the material is described in accordance with
the provisions of Sec. 172.203(c) of this part.
(ii) To a material for which the hazard class is to be determined by
testing under the criteria in Sec. 172.101(c)(11).
(iii) If the n.o.s. description for the material (other than a
mixture of hazardous materials of different classes meeting the
definitions of more than one hazard class) contains the name of the
chemical element or group which is primarily responsible for the
material being included in the hazard class indicated.
(iv) If the n.o.s. description for the material (which is a mixture
of hazardous materials of different classes meeting the definition of
more than one hazard class) contains the name of the chemical element or
group responsible for the material meeting the definition of one of
these classes. In such cases, only the technical name of the component
that is not appropriately identified in the n.o.s. description shall be
entered in parentheses.
(l) Marine pollutants. (1) If the proper shipping name for a
material which is a marine pollutant does not identify by name the
component which makes the material a marine pollutant, the name of that
component must appear in parentheses in association with the basic
description. Where two or more components which make a material a marine
pollutant are present, the names of at
[[Page 381]]
least two of the components most predominantly contributing to the
marine pollutant designation must appear in parentheses in association
with the basic description.
(2) The words ``Marine Pollutant'' shall be entered in association
with the basic description for a material which is a marine pollutant.
(3) Except for transportation by vessel, marine pollutants subject
to the provisions of 49 CFR 130.11 are excepted from the requirements of
paragraph (l) of this section if a phrase indicating the material is an
oil is placed in association with the basic description.
(4) Except when all or part of transportation is by vessel, marine
pollutants in non-bulk packagings are not subject to the requirements of
paragraphs (l)(1) and (l)(2) of this section (see Sec. 171.4 of this
subchapter).
(m) Poisonous Materials. Notwithstanding the hazard class to which a
material is assigned, for materials that are poisonous by inhalation
(see Sec. 171.8 of this subchapter), the words ``Poison-Inhalation
Hazard'' or ``Toxic-Inhalation Hazard'' and the words ``Zone A'', ``Zone
B'', ``Zone C'', or ``Zone D'' for gases or ``Zone A'' or ``Zone B'' for
liquids, as appropriate, shall be entered on the shipping paper
immediately following the shipping description. The word ``Poison'' or
``Toxic'' need not be repeated if it otherwise appears in the shipping
description.
(n) Elevated temperature materials. If a liquid material in a
package meets the definition of an elevated temperature material in
Sec. 171.8 of this subchapter, and the fact that it is an elevated
temperature material is not disclosed in the proper shipping name (for
example, when the words ``Molten'' or ``Elevated temperature'' are part
of the proper shipping name), the word ``HOT'' must immediately precede
the proper shipping name of the material on the shipping paper.
(o) Organic peroxides and self-reactive materials. The description
on a shipping paper for a Division 4.1 (self-reactive) material or a
Division 5.2 (organic peroxide) material must include the following
additional information, as appropriate:
(1) If notification or competent authority approval is required, the
shipping paper must contain a statement of approval of the
classification and conditions of transport.
(2) For Division 4.1 (self-reactive) and Division 5.2 (organic
peroxide) materials that require temperature control during transport,
the control and emergency temperature must be included on the shipping
paper.
(3) The word ``SAMPLE'' must be included in association with the
basic description when a sample of a Division 4.1 (self-reactive)
material (see Sec. 173.224(c)(3) of this subchapter) or Division 5.2
(organic peroxide) material (see Sec. 173.225(b)(2) of this subchapter)
is offered for transportation.
(p) Liquefied petroleum gas (LPG). The word ``non-odorized'' or
``not-odorized'' must be included in association with the proper
shipping description on a shipping paper when non-odorized liquefied
petroleum gas is offered for transportation.
[Amdt. 172-29A, 41 FR 40677, Sept. 20, 1976]
Editorial Note: For Federal Register citations affecting Sec.
172.203, see the List of CFR Sections Affected, which appears in the
Finding Aids section of the printed volume and at www.fdsys.gov.
Sec. 172.204 Shipper's certification.
(a) General. Except as provided in paragraphs (b) and (c) of this
section, each person who offers a hazardous material for transportation
shall certify that the material is offered for transportation in
accordance with this subchapter by printing (manually or mechanically)
on the shipping paper containing the required shipping description the
certification contained in paragraph (a)(1) of this section or the
certification (declaration) containing the language contained in
paragraph (a)(2) of this section. For transportation by rail only, the
certification may be received verbally or with an electronic signature
in conformance with paragraphs (a)(3)(i) and (a)(3)(ii) of this section.
(1) ``This is to certify that the above-named materials are properly
classified, described, packaged, marked and labeled, and are in proper
condition for transportation according to the applicable regulations of
the Department of Transportation.''
[[Page 382]]
Note: In line one of the certification the words ``herein-named''
may be substituted for the words ``above-named''.
(2) ``I hereby declare that the contents of this consignment are
fully and accurately described above by the proper shipping name, and
are classified, packaged, marked and labeled/placarded, and are in all
respects in proper condition for transport according to applicable
international and national governmental regulations.''
Note to paragraph (a)(2): In the certification the word ``above''
may be substituted for the word ``below'' as appropriate.
(3) Rail only certifications. For transportation by rail, the
shipping paper certification may also be accomplished by one of the
following methods:
(i) Verbal Certification. When received telephonically, by the
carrier reading the complete shipping description that will accompany
the shipment back to the offeror and receiving verbal acknowledgment
that the description is as required. This verbal acknowledgement must be
recorded, either on the shipping document or in a separate record, e.g.,
the waybill, in accordance with Sec. 174.24, and must include the date
and name of the person who provided this information; or
(ii) Electronic Signature Certification. When transmitted
electronically, by completing the field designated for the shipper's
signature, the shipper is also certifying its compliance with the
certification specified in Sec. 172.204(a).'' The name of the principal
partner, officer, or employee of the offeror or their agent must be
substituted for the asterisks;
(b) Exceptions. (1) Except for a hazardous waste, no certification
is required for a hazardous material offered for transportation by motor
vehicle and transported:
(i) In a cargo tank supplied by the carrier, or
(ii) By the shipper as a private carrier except for a hazardous
material that is to be reshipped or transferred from one carrier to
another.
(2) No certification is required for the return of an empty tank car
which previously contained a hazardous material and which has not been
cleaned or purged.
(c) Transportation by air--(1) General. Certification containing the
following language may be used in place of the certification required by
paragraph (a) of this section:
I hereby certify that the contents of this consignment are fully and
accurately described above by proper shipping name and are classified,
packaged, marked and labeled, and in proper condition for carriage by
air according to applicable national governmental regulations.
Note to paragraph (c)(1): In the certification, the word ``packed''
may be used instead of the word ``packaged'' until October 1, 2010.
(2) Certificate in duplicate. Each person who offers a hazardous
material to an aircraft operator for transportation by air shall provide
two copies of the certification required in this section. (See Sec.
175.30 of this subchapter.)
(3) Additional certification requirements. Effective October 1,
2006, each person who offers a hazardous material for transportation by
air must add to the certification required in this section the following
statement:
``I declare that all of the applicable air transport requirements
have been met.''
(i) Each person who offers any package or overpack of hazardous
materials for transport by air must ensure that:
(A) The articles or substances are not prohibited for transport by
air (see the Sec. 172.101 Table);
(B) The articles or substances are properly classed, marked and
labeled and otherwise in a condition for transport as required by this
subchapter;
(C) The articles or substances are packaged in accordance with all
the applicable air transport requirements, including appropriate types
of packaging that conform to the packing requirements and the ``A''
Special Provisions in Sec. 172.102; inner packaging and maximum
quantity per package limits; the compatibility requirements (see, for
example, Sec. 173.24 of this subchapter); and requirements for closure
for both inner and outer packagings, absorbent materials, and pressure
differential in Sec. 173.27 of this subchapter. Other requirements may
also apply. For example, single packagings may be prohibited, inner
packaging may need to be packed in intermediate packagings,
[[Page 383]]
and certain materials may be required to be transported in packagings
meeting a more stringent performance level.
(ii) [Reserved]
(4) Radioactive material. Each person who offers any radioactive
material for transportation aboard a passenger-carrying aircraft shall
sign (mechanically or manually) a printed certificate stating that the
shipment contains radioactive material intended for use in, or incident
to, research, or medical diagnosis or treatment.
(d) Signature. The certifications required by paragraph (a) or (c)
of this section:
(1) Must be legibly signed by a principal, officer, partner, or
employee of the shipper or his agent; and
(2) May be legibly signed manually, by typewriter, or by other
mechanical means.
(3) For transportation by rail, when transmitted by telephone or
electronically, the signature must be in one of the following forms: The
name of the principal person, partner, officer, or employee of the
offeror or his agent in a computer field defined for that purpose.
[Amdt. 172-29A, 41 FR 40677, Sept. 20, 1976]
Editorial Note: For Federal Register citations affecting Sec.
172.204, see the List of CFR Sections Affected, which appears in the
Finding Aids section of the printed volume and at www.fdsys.gov.
Sec. 172.205 Hazardous waste manifest.
(a) No person may offer, transport, transfer, or deliver a hazardous
waste (waste) unless an EPA Form 8700-22 and 8700-22A (when necessary)
hazardous waste manifest (manifest) is prepared in accordance with 40
CFR 262.20 and is signed, carried, and given as required of that person
by this section.
(b) The shipper (generator) shall prepare the manifest in accordance
with 40 CFR part 262.
(c) The original copy of the manifest must be dated by, and bear the
handwritten signature of, the person representing:
(1) The shipper (generator) of the waste at the time it is offered
for transportation, and
(2) The initial carrier accepting the waste for transportation.
(d) A copy of the manifest must be dated by, and bear the
handwritten signature of the person representing:
(1) Each subsequent carrier accepting the waste for transportation,
at the time of acceptance, and
(2) The designated facility receiving the waste, upon receipt.
(e) A copy of the manifest bearing all required dates and signatures
must be:
(1) Given to a person representing each carrier accepting the waste
for transportation,
(2) Carried during transportation in the same manner as required by
this subchapter for shipping papers,
(3) Given to a person representing the designated facility receiving
the waste,
(4) Returned to the shipper (generator) by the carrier that
transported the waste from the United States to a foreign destination
with a notation of the date of departure from the United States, and
(5) Retained by the shipper (generator) and by the initial and each
subsequent carrier for three years from the date the waste was accepted
by the initial carrier. Each retained copy must bear all required
signatures and dates up to and including those entered by the next
person who received the waste.
(f) Transportation by rail. Notwithstanding the requirements of
paragraphs (d) and (e) of this section, the following requirements
apply:
(1) When accepting hazardous waste from a non-rail transporter, the
initial rail transporter must:
(i) Sign and date the manifest acknowledging acceptance of the
hazardous waste;
(ii) Return a signed copy of the manifest to the non-rail
transporter;
(iii) Forward at least three copies of the manifest to:
(A) The next non-rail transporter, if any;
(B) The designated facility, if the shipment is delivered to that
facility by rail; or
(C) The last rail transporter designated to handle the waste in the
United States; and
[[Page 384]]
(iv) Retain one copy of the manifest and rail shipping paper in
accordance with 40 CFR 263.22.
(2) Rail transporters must ensure that a shipping paper containing
all the information required on the manifest (excluding the EPA
identification numbers, generator certification and signatures) and, for
exports, an EPA Acknowledgment of Consent accompanies the hazardous
waste at all times. Intermediate rail transporters are not required to
sign either the manifest or shipping paper.
(3) When delivering hazardous waste to the designated facility, a
rail transporter must:
(i) Obtain the date of delivery and handwritten signature of the
owner or operator of the designated facility on the manifest or the
shipping paper (if the manifest has not been received by the facility);
and
(ii) Retain a copy of the manifest or signed shipping paper in
accordance with 40 CFR 263.22.
(4) When delivering hazardous waste to a non-rail transporter, a
rail transporter must:
(i) Obtain the date of delivery and the handwritten signature of the
next non-rail transporter on the manifest; and
(ii) Retain a copy of the manifest in accordance with 40 CFR 263.22.
(5) Before accepting hazardous waste from a rail transporter, a non-
rail transporter must sign and date the manifest and provide a copy to
the rail transporter.
(g) The person delivering a hazardous waste to an initial rail
carrier shall send a copy of the manifest, dated and signed by a
representative of the rail carrier, to the person representing the
designated facility.
(h) A hazardous waste manifest required by 40 CFR part 262,
containing all of the information required by this subpart, may be used
as the shipping paper required by this subpart.
(i) The shipping description for a hazardous waste must be modified
as required by Sec. 172.101(c)(9).
[Amdt. 172-58, 45 FR 34698, May 22, 1980, as amended by Amdt. 172-90, 49
FR 10510, Mar. 20, 1984; 49 FR 11184, Mar. 26, 1984; Amdt. 172-248, 61
FR 28675, June 5, 1996; 70 FR 34075, June 13, 2005]
Subpart D_Marking
Sec. 172.300 Applicability.
(a) Each person who offers a hazardous material for transportation
shall mark each package, freight container, and transport vehicle
containing the hazardous material in the manner required by this
subpart.
(b) When assigned the function by this subpart, each carrier that
transports a hazardous material shall mark each package, freight
container, and transport vehicle containing the hazardous material in
the manner required by this subpart.
(c) Unless otherwise provided in a specific rule, stocks of
preprinted packagings marked in accordance with this subpart prior to
the effective date of a final rule may be continued in use, in the
manner previously authorized, until depleted or for a one-year period
subsequent to the compliance date of the marking amendment, whichever is
less.
[Amdt. 172-101, 45 FR 74666, Nov. 10, 1980, as amended at 76 FR 3365,
Jan. 19, 2011]
Sec. 172.301 General marking requirements for non-bulk packagings.
(a) Proper shipping name and identification number. (1) Except as
otherwise provided by this subchapter, each person who offers a
hazardous material for transportation in a non-bulk packaging must mark
the package with the proper shipping name and identification number
(preceded by ``UN'', ``NA'' or ``ID,'' as appropriate) for the material
as shown in the Sec. 172.101 Hazardous Materials Table. The
identification number marking preceded by ``UN'', ``NA'', or ``ID'' as
appropriate must be marked in characters at least 12 mm (0.47 inches)
high. Packages with a maximum capacity of 30 liters (8 gallons) or less,
30 kg (66 pounds) maximum net mass, or cylinders with a water capacity
of 60 liters (16 gallons) or less must be marked with characters at
least 6 mm (0.24 inches) high. Packages with a maximum capacity of 5
liters (1.32 gallons) or 5 kg (11 pounds) or less must be marked in a
size appropriate for the size of the package.
(i) Transitional exception. For domestic transportation, until
January 1,
[[Page 385]]
2017, the identification number markings are not subject to the minimum
size requirements specified in this paragraph (a)(1).
(ii) Exception for permanently marked packagings. For domestic
transportation, a packaging manufactured prior to January 1, 2017 and
permanently marked (e.g., by embossing or through a heat stamp process)
with the appropriate identification number marking may continue in
service until the end of its useful life regardless of whether the
identification number markings meet the minimum size requirements
specified in this paragraph (a)(1).
(2) The proper shipping name for a hazardous waste (as defined in
Sec. 171.8 of this subchapter) is not required to include the word
``waste'' if the package bears the EPA marking prescribed by 40 CFR
262.32.
(3) Large quantities of a single hazardous material in non-bulk
packages. A transport vehicle or freight container containing only a
single hazardous material in non-bulk packages must be marked, on each
side and each end as specified in the Sec. 172.332 or Sec. 172.336,
with the identification number specified for the hazardous material in
the Sec. 172.101 Table, subject to the following provisions and
limitations:
(i) Each package is marked with the same proper shipping name and
identification number;
(ii) The aggregate gross weight of the hazardous material is 4,000
kg (8,820 pounds) or more;
(iii) All of the hazardous material is loaded at one loading
facility;
(iv) The transport vehicle or freight container contains no other
material, hazardous or otherwise; and
(v) The identification number marking requirement of this paragraph
(a)(3) does not apply to Class 1, Class 7, or to non-bulk packagings for
which identification numbers are not required.
(b) Technical names. In addition to the marking required by
paragraph (a) of this section, each non-bulk packaging containing a
hazardous material subject to the provisions of Sec. 172.203(k) of this
part, except for a Division 6.2 material, must be marked with the
technical name in parentheses in association with the proper shipping
name in accordance with the requirements and exceptions specified for
display of technical descriptions on shipping papers in Sec. 172.203(k)
of this part. A technical name should not be marked on the outer package
of a Division 6.2 material.
(c) Special permit packagings. Except as provided in Sec. 173.23 of
this subchapter, the outside of each package authorized by a special
permit must be plainly and durably marked ``DOT-SP'' followed by the
special permit number assigned. Packages authorized by an exemption
issued prior to October 1, 2007, may be plainly and durably marked
``DOT-E'' in lieu of ``DOT-SP'' followed by the number assigned as
specified in the most recent version of that exemption.
(d) Consignee's or consignor's name and address. Each person who
offers for transportation a hazardous material in a non-bulk package
shall mark that package with the name and address of the consignor or
consignee except when the package is--
(1) Transported by highway only and will not be transferred from one
motor carrier to another; or
(2) Part of a carload lot, truckload lot or freight container load,
and the entire contents of the rail car, truck or freight container are
shipped from one consignor to one consignee.
(e) Previously marked packagings. A package which has been
previously marked as required for the material it contains and on which
the marking remains legible, need not be remarked. (For empty
packagings, see Sec. 173.29 of this subchapter.)
(f) NON-ODORIZED marking on cylinders containing LPG. No person may
offer for transportation or transport a specification cylinder, except a
Specification 2P or 2Q container or a Specification 39 cylinder,
containing unodorized liquefied petroleum gas (LPG) unless it is legibly
marked NON-ODORIZED or NOT ODORIZED in letters not less than 6.3 mm
(0.25 inches) in height near the marked proper shipping name required by
paragraph (a) of this section. The NON-ODORIZED or NOT ODORIZED marking
may appear
[[Page 386]]
on a cylinder used for both unodorized and odorized LPG.
[Amdt. 172-123, 55 FR 52590, Dec. 21, 1990, as amended by Amdt. 172-151,
62 FR 1227, Jan. 8, 1997; 62 FR 39404, July 22, 1997; 63 FR 16075, Apr.
1, 1998; 66 FR 45182, Aug. 28, 2001; 68 FR 45030, July 31, 2003; 69 FR
64471, Nov. 4, 2004; 70 FR 73164, Dec. 9, 2005; 71 FR 32258, June 2,
2006; 76 FR 3365, Jan. 19, 2011; 76 FR 56314, Sept. 13, 2011; 78 FR
1072, Jan. 7, 2013; 78 FR 65478, Oct. 31, 2013; 81 FR 35540, June 2,
2016]
Sec. 172.302 General marking requirements for bulk packagings.
(a) Identification numbers. Except as otherwise provided in this
subpart, no person may offer for transportation or transport a hazardous
material in a bulk packaging unless the packaging is marked as required
by Sec. 172.332 with the identification number specified for the
material in the Sec. 172.101 table--
(1) On each side and each end, if the packaging has a capacity of
3,785 L (1,000 gallons) or more;
(2) On two opposing sides, if the packaging has a capacity of less
than 3,785 L (1,000 gallons); or
(3) For cylinders permanently installed on a tube trailer motor
vehicle, on each side and each end of the motor vehicle.
(b) Size of markings. Except as otherwise provided, markings
required by this subpart on bulk packagings must--
(1) Have a width of at least 6.0 mm (0.24 inch) and a height of at
least 100 mm (3.9 inches) for rail cars;
(2) Have a width of at least 4.0 mm (0.16 inch) and a height of at
least 25 mm (one inch) for portable tanks with capacities of less than
3,785 L (1,000 gallons) and IBCs; and
(3) Have a width of at least 6.0 mm (0.24 inch) and a height of at
least 50 mm (2.0 inches) for cargo tanks and other bulk packagings.
(c) Special permit packagings. Except as provided in Sec. 173.23 of
this subchapter, the outside of each package used under the terms of a
special permit must be plainly and durably marked ``DOT-SP'' followed by
the special permit number assigned. Packages authorized by an exemption
issued prior to October 1, 2007 may be plainly and durably marked ``DOT-
E'' in lieu of ``DOT-SP'' followed by the number assigned as specified
in the most recent version of that exemption.
(d) Each bulk packaging marked with a proper shipping name, common
name or identification number as required by this subpart must remain
marked when it is emptied unless it is--
(1) Sufficiently cleaned of residue and purged of vapors to remove
any potential hazard; or
(2) Refilled, with a material requiring different markings or no
markings, to such an extent that any residue remaining in the packaging
is no longer hazardous.
(e) Additional requirements for marking portable tanks, cargo tanks,
tank cars, multi-unit tank car tanks, and other bulk packagings are
prescribed in Sec. Sec. 172.326, 172.328, 172.330, and 172.331,
respectively, of this subpart.
(f) A bulk packaging marked prior to October 1, 1991, in conformance
to the regulations of this subchapter in effect on September 30, 1991,
need not be remarked if the key words of the proper shipping name are
identical to those currently specified in the Sec. 172.101 table. For
example, a tank car marked ``NITRIC OXIDE'' need not be remarked
``NITRIC OXIDE, COMPRESSED''.
(g) A rail car, freight container, truck body or trailer in which
the lading has been fumigated with any hazardous material, or is
undergoing fumigation, must be marked as specified in Sec. 173.9 of
this subchapter.
[Amdt. 172-123, 55 FR 52591, Dec. 21, 1990, as amended at 56 FR 66254,
Dec. 20, 1991; Amdt. 172-150, 61 FR 50624, Sept. 26, 1996; Amdt. 172-
151, 62 FR 1228, Jan. 8, 1997; 62 FR 39398, July 22, 1997; 66 FR 45379,
Aug. 28, 2001; 70 FR 73164, Dec. 9, 2005; 72 FR 55692, Oct. 1, 2007]
Sec. 172.303 Prohibited marking.
(a) No person may offer for transportation or transport a package
which is marked with the proper shipping name, the identification number
of a hazardous material or any other markings indicating that the
material is hazardous (e.g., RQ, INHALATION HAZARD) unless the package
contains the identified hazardous material or its residue.
(b) This section does not apply to--
(1) Transportation of a package in a transport vehicle or freight
container
[[Page 387]]
if the package is not visible during transportation and is loaded by the
shipper and unloaded by the shipper or consignee.
(2) Markings on a package which are securely covered in
transportation.
(3) The marking of a shipping name on a package when the name
describes a material not regulated under this subchapter.
[Amdt. 172-123, 55 FR 52591, Dec. 21, 1990, as amended at 56 FR 66254,
Dec. 20, 1991; 72 FR 55692, Oct. 1, 2007]
Sec. 172.304 Marking requirements.
(a) The marking required in this subpart--
(1) Must be durable, in English and printed on or affixed to the
surface of a package or on a label, tag, or sign.
(2) Must be displayed on a background of sharply contrasting color;
(3) Must be unobscured by labels or attachments; and
(4) Must be located away from any other marking (such as
advertising) that could substantially reduce its effectiveness.
(b) [Reserved]
[Amdt. 172-29, 41 FR 15996, Apr. 15, 1976, as amended by Amdt. 172-29B,
41 FR 57067, Dec. 30, 1976]
Sec. 172.306 [Reserved]
Sec. 172.308 Authorized abbreviations.
(a) Abbreviations may not be used in a proper shipping name marking
except as authorized in this section.
(b) The abbreviation ``ORM'' may be used in place of the words
``Other Regulated Material.''
(c) Abbreviations which appear as authorized descriptions in column
2 of the Sec. 172.101 table (e.g., ``TNT'' and ``PCB'') are authorized.
[Amdt. 172-123, 55 FR 52591, Dec. 21, 1990, as amended by Amdt. 172-145,
60 FR 49110, Sept. 21, 1995]
Sec. 172.310 Class 7 (radioactive) materials.
In addition to any other markings required by this subpart, each
package containing Class 7 (radioactive) materials must be marked as
follows:
(a) Each package with a gross mass greater than 50 kg (110 lb) must
have its gross mass including the unit of measurement (which may be
abbreviated) marked on the outside of the package.
(b) Each industrial, Type A, Type B(U), or Type B(M) package must be
legibly and durably marked on the outside of the packaging, in letters
at least 12 mm (0.47 in) high, with the words ``TYPE IP-1,'' ``TYPE IP-
2,'' ``TYPE IP-3,'' ``TYPE A,'' ``TYPE B(U)'' or ``TYPE B(M),'' as
appropriate. A package which does not conform to Type IP-1, Type IP-2,
Type IP-3, Type A, Type B(U) or Type B(M) requirements may not be so
marked.
(c) Each package which conforms to an IP-1, IP-2, IP-3 or a Type A
package design must be legibly and durably marked on the outside of the
packaging with the international vehicle registration code of the
country of origin of the design. The international vehicle registration
code for packages designed by a United States company or agency is the
symbol ``USA.''
(d) Each package which conforms to a Type B(U) or Type B(M) package
design must have the outside of the outermost receptacle, which is
resistant to the effects of fire and water, plainly marked by embossing,
stamping or other means resistant to the effects of fire and water with
a radiation symbol that conforms to the requirements of appendix B of
this part.
(e) Each Type B(U), Type B(M) or fissile material package destined
for export shipment must also be marked ``USA'' in conjunction with the
specification marking, or other package certificate identification. (See
Sec. Sec. 173.471, 173.472, and 173.473 of this subchapter.)
[Doc. No. RSPA-99-6283 (HM-230), 69 FR 3668, Jan. 26, 2004, as amended
at 79 FR 40609, July 11, 2014]
Sec. 172.312 Liquid hazardous materials in non-bulk packagings.
(a) Except as provided in this section, each non-bulk combination
package having inner packagings containing liquid hazardous materials,
single packaging fitted with vents, or open cryogenic receptacle
intended for the transport of refrigerated liquefied gases must be:
(1) Packed with closures upward, and
(2) Legibly marked with package orientation markings that are
similar to
[[Page 388]]
the illustration shown in this paragraph, on two opposite vertical sides
of the package with the arrows pointing in the correct upright
direction. The arrows must be either black or red on white or other
suitable contrasting background and commensurate with the size of the
package. Depicting a rectangular border around the arrows is optional.
[GRAPHIC] [TIFF OMITTED] TC02MR91.011
(b) Arrows for purposes other than indicating proper package
orientation may not be displayed on a package containing a liquid
hazardous material.
(c) The requirements of paragraph (a) of this section do not apply
to--
(1) A non-bulk package with inner packagings which are cylinders.
(2) Except when offered or intended for transportation by aircraft,
packages containing flammable liquids in inner packagings of 1 L or less
prepared in accordance with Sec. 173.150 (b) or (c) of this subchapter.
(3) When offered or intended for transportation by aircraft,
packages containing liquid hazardous materials in inner packagings of
120 mL (4 fluid oz.) or less when packed with sufficient absorption
material between the inner and outer packagings to completely absorb the
liquid contents.
(4) Liquids contained in manufactured articles (e.g., alcohol or
mercury in thermometers) which are leak-tight in all orientations.
(5) A non-bulk package with hermetically sealed inner packagings not
exceeding 500 mL each.
(6) Packages containing liquid infectious substances in primary
receptacles not exceeding 50 mL (1.7 oz.).
(7) Class 7 radioactive material in Type A, IP-2, IP-3, Type B(U),
or Type B(M) packages.
[Amdt. 172-123, 55 FR 52591, Dec. 21, 1990, as amended at 56 FR 66254,
Dec. 20, 1991; 57 FR 45458, Oct. 1, 1992; 64 FR 51918, Sept. 27, 1999;
66 FR 45379, Aug. 28, 2001; 68 FR 45030, July 31, 2003; 71 FR 54395,
Sept. 14, 2006; 71 FR 78627, Dec. 29, 2006; 76 FR 3365, Jan. 19, 2011;
78 FR 1073, Jan. 7, 2013]
Sec. 172.313 Poisonous hazardous materials.
In addition to any other markings required by this subpart:
(a) A material poisonous by inhalation (see Sec. 171.8 of this
subchapter) shall be marked ``Inhalation Hazard'' in association with
the required labels or placards, as appropriate, and shipping name when
required. The marking must be on two opposing sides of a bulk packaging.
(See Sec. 172.302(b) of this subpart for size of markings on bulk
packages.) When the words ``Inhalation Hazard'' appear on the label, as
prescribed in Sec. Sec. 172.416 and 172.429, or placard, as prescribed
in Sec. Sec. 172.540 and 172.555, the ``Inhalation Hazard'' marking is
not required on the package.
(b) Each non-bulk plastic outer packaging used as a single or
composite packaging for materials meeting the definition of Division 6.1
(in Sec. 173.132 of this subchapter) shall be permanently marked, by
embossment or other durable means, with the word ``POISON'' in letters
at least 6.3 mm (0.25 inch) in height. Additional text or symbols
related to hazard warning may be included in the marking. The marking
shall be located within 150 mm (6 inches) of the closure of the
packaging.
(c) A transport vehicle or freight container containing a material
poisonous by inhalation in non-bulk packages shall be marked, on each
side and each end as specified in Sec. 172.332 or Sec. 172.336, with
the identification number specified for the hazardous material in the
Sec. 172.101 table, subject to the following provisions and
limitations:
[[Page 389]]
(1) The material is in Hazard Zone A or B;
(2) The transport vehicle or freight container is loaded at one
facility with 1,000 kg (2,205 pounds) or more aggregate gross weight of
the material in non-bulk packages marked with the same proper shipping
name and identification number; and
(3) If the transport vehicle or freight container contains more than
one material meeting the provisions of this paragraph (c), it shall be
marked with the identification number for one material, determined as
follows:
(i) For different materials in the same hazard zone, with the
identification number of the material having the greatest aggregate
gross weight; and
(ii) For different materials in both Hazard Zones A and B, with the
identification number for the Hazard Zone A material.
(d) For a packaging containing a Division 6.1 PG III material, ``PG
III'' may be marked adjacent to the POISON label. (See Sec.
172.405(c).)
[Amdt. 172-123, 55 FR 52592, Dec. 21, 1990, as amended at 57 FR 46624,
Oct. 9, 1992; Amdt. 172-151, 62 FR 1228, Jan. 8, 1997; 62 FR 39398,
39405, July 22, 1997; 63 FR 16075, Apr. 1, 1998; 64 FR 10776, Mar. 5,
1999]
Sec. 172.315 Limited quantities.
(a) Modes other than air transport. Except for an article or
substance of Class 7 prepared in accordance with subpart I of part 173,
a package prepared in accordance with applicable limited quantity
requirements in part 173 of this subchapter and offered for
transportation by a mode other than air must display the limited
quantity marking shown in paragraph (a)(1) of this section. A package
displaying this mark is not subject to the marking requirements of Sec.
172.301 of this subpart unless the limited quantity package also
contains a hazardous substance or a hazardous waste. Required markings
need not be duplicated if already marked as prescribed elsewhere in this
subpart. As an alternative, a packaging may display the limited quantity
``Y'' mark shown in paragraph (b) of this section if the package
conforms to authorized substance and article provisions and the inner
and outer package quantity limits in Sec. 173.27(f) of this subchapter.
(1) Marking description. The top and bottom portions of the square-
on-point and the border forming the square-on-point must be black and
the center white or of a suitable contrasting background as follows:
[GRAPHIC] [TIFF OMITTED] TR30DE11.004
[[Page 390]]
(2) The square-on-point must be durable, legible and of a size
relative to the packaging, readily visible, and must be applied on at
least one side or one end of the outer packaging. The width of the
border forming the square-on-point must be at least 2 mm and the minimum
dimension of each side, as measured from the outside of the lines
forming the border, must be 100 mm unless the packaging size requires a
reduced size marking that must be no less than 50 mm on each side and
the width of the border forming the square on point may be reduced to a
minimum of 1 mm. Where dimensions are not specified, all features shall
be in approximate proportion to those shown. When intended for
transportation by vessel, a cargo transport unit (see Sec. 176.2 of
this subchapter) containing packages of hazardous materials in only
limited quantities must be marked once on each side and once on each end
of the exterior of the unit with an identical mark which must have
minimum dimensions of 250 mm on each side.
(i) Transitional exception. A marking in conformance with the
requirements of this paragraph in effect on December 31, 2014, may
continue to be used until December 31, 2016.
(ii) For domestic transportation, a packaging marked prior to
January 1, 2017 and in conformance with the requirements of this
paragraph in effect on December 31, 2014, may continue in service until
the end of its useful life.
(3) Except for Class 1 and 7, and Division 6.1 and 6.2 materials,
for highway transportation by private motor carrier, the limited
quantity marking is not required to be displayed on a package containing
materials assigned to Packing Group II and III prepared in accordance
with the limited quantity requirements in subpart B of part 173 of this
subchapter provided:
(i) Inner packagings for liquid hazardous materials do not exceed
1.0 L (0.3 gallons) net capacity each;
(ii) Inner packagings for solid hazardous materials do not exceed
1.0 kg (2.2 pounds) net capacity each;
(iii) No more than 2 L (0.6 gallons) or 2 kg (4.4 pounds) aggregate
net quantity of any one hazardous material is transported per vehicle;
(iv) The total gross weight of all the limited quantity packages per
vehicle does not exceed 60 kg (132 pounds); and
(v) Each package is marked with the name and address of the offeror,
a 24-hour emergency response telephone number and the statement
``Contains Chemicals'' in letters at least 25 mm (one-inch) high on a
contrasting background.
(b) Air transport. Except for an article or substance of Class 7
prepared in accordance with subpart I of part 173, a package prepared in
accordance with air-specific limited quantity requirements prescribed in
Sec. 173.27 of this subchapter and intended for transportation by air
must display the limited quantity mark prescribed in paragraph (b)(1) of
this section in addition to other markings required by this subpart
(e.g., ``RQ'', proper shipping name, identification number, as
appropriate). Required markings need not be duplicated if already marked
as prescribed elsewhere in this subpart.
(1) Marking Description. The top and bottom portions of the square-
on-point and the border forming the square-on-point must be black and
the center white or of a suitable contrasting background and the symbol
``Y'' must be black and located in the center of the square-on-point and
be clearly visible as follows:
[[Page 391]]
[GRAPHIC] [TIFF OMITTED] TR30DE11.005
(2) The square-on-point must be durable, legible and of a size
relative to the package as to be readily visible. The square-on-point
must be applied on at least one side or one end of the outer packaging.
The width of the border forming the square-on-point must be at least 2
mm and the minimum dimension of each side, as measured from the outside
of the lines forming the border, must be 100 mm unless the package size
requires a reduced size marking that must be no less than 50 mm on each
side and the width of the border forming the square on point may be
reduced to a minimum of 1 mm. Where dimensions are not specified, all
features shall be in approximate proportion to those shown.
(i) Transitional exception. A marking in conformance with the
requirements of this paragraph in effect on December 31, 2014, may
continue to be used until December 31, 2016.
(ii) For domestic transportation, a packaging marked prior to
January 1, 2017 and in conformance with the requirements of this
paragraph in effect on December 31, 2014, may continue in service until
the end of its useful life.
(c) Limited quantity markings prescribed in paragraphs (a) and (b)
of this section may use the packaging itself as the contrasting
background for the center portion of the marking if the color
sufficiently contrasts so that the black border, top and bottom portions
of the square-on-point, and the ``Y'' symbol, if applicable, are clearly
recognizable.
(d) Transitional exceptions--(1) Alternative markings. Except for
transportation by aircraft and until December 31, 2015, a package
containing a limited quantity may continue to be marked in accordance
with the requirements of this section in effect on October 1, 2010
(i.e., square-on-point with identification number only) as an
alternative to the marking required by paragraph (a) of this section.
(2) ORM-D marked packaging. Except for transportation by aircraft
and until December 31, 2020, a packaging marked in accordance with Sec.
172.316 of this part is not required to be marked with the limited
quantity marking required by paragraph (a) of this section. For
transportation by aircraft and until December 31, 2012, a packaging
marked in accordance with Sec. 172.316(a)(1) is not required to be
marked with the limited quantity ``Y'' marking required by paragraph (b)
of this section.
[76 FR 82174, Dec. 30, 2011, as amended at 78 FR 1073, Jan. 7, 2013; 78
FR 65478, Oct. 31, 2013; 80 FR 1149, Jan. 8, 2015; 81 FR 3671, Jan. 21,
2016]
[[Page 392]]
Sec. 172.316 Packagings containing materials classed as ORM-D.
(a) Each non-bulk packaging containing a material classed as ORM-D
must be marked on at least one side or end with the ORM-D designation
immediately following or below the proper shipping name of the material.
The ORM designation must be placed within a rectangle that is
approximately 6.3 mm (0.25 inches) larger on each side than the
designation. Until December 31, 2020, the designation ORM-D is for an
ORM-D material, as defined in Sec. 173.144, that is packaged in
accordance with Sec. Sec. 173.63(b), 173.150 through 173.156, and
173.306.
(b) When the ORM-D marking including the proper shipping name can
not be affixed on the package surface, it may be on an attached tag.
(c) The marking ORM-D is the certification by the person offering
the packaging for transportation that the material is properly
described, classed, packaged, marked and labeled (when appropriate) and
in proper condition for transportation according to the applicable
regulations of this subchapter. This form of certification does not
preclude the requirement for a certificate on a shipping paper when
required by subpart C of this part.
[Amdt. 172-29, 41 FR 15996, Apr. 15, 1976, as amended by Amdt. 172-123,
55 FR 52592, Dec. 21, 1990; 56 FR 66254, Dec. 20, 1991; 76 FR 3366, Jan.
19, 2011; 78 FR 1113, Jan. 7, 2013; 78 FR 65478, Oct. 31, 2013]