30 Mineral Resources 1 2013-07-01 2013-07-01 false Boilers. 56.13030 Section 56.13030 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Compressed Air and Boilers
§ 56.13030 Boilers.

(a) Fired pressure vessels (boilers) shall be equipped with water level gauges, pressure gauges, automatic pressure-relief valves, blowdown piping, and other safety devices approved by the American Society of Mechanical Engineers to protect against hazards from overpressure, flameouts, fuel interruptions and low water level, all as required by the appropriate sections, chapters and appendices listed in paragraphs (b) (1) and (2) of this section.

(b) These gauges, devices and piping shall be designed, installed, operated, maintained, repaired, altered, inspected, and tested by inspectors holding a valid National Board Commission and in accordance with the following listed sections, chapters and appendices:

(1) The ASME Boiler and Pressure Vessel Code, 1977, Published by the American Society of Mechanical Engineers.

Section and Title IPower Boilers. IIMaterial Specifications—Part A—Ferrous. IIMaterial Specifications—Part B—Non-ferrous. IIMaterial Specifications—Part C—Welding Rods, Electrodes, and Filler Metals. IVHeating Boilers VNondestructive Examination VIRecommended Rules for Care and Operation of Heating Boilers VIIRecommended Rules for Care of Power Boilers

(2) The National Board Inspection Code, a Manual for Boiler and Pressure Vessel Inspectors, 1979, published by the National Board of Boiler and Pressure Vessel Inspectors.

Chapter and Title IGlossary of Terms IIInspection of Boilers and Pressure Vessels IIIRepairs and Alterations to Boiler and Pressure Vessels by Welding IVShop Inspection of Boilers and Pressure Vessels VInservice Inspection of Pressure Vessels by Authorized Owner-User Inspection Agencies Appendix and Title ASafety and Safety Relief Valves BNon-ASME Code Boilers and Pressure Vessels CStorage of Mild Steel Covered Arc Welding Electrodes D-RNational Board “R” (Repair) Symbol Stamp D-VRNational Board “VR” (Repair of Safety and Safety Relief Valve) Symbol Stamp D-VR1Certificate of Authorization for Repair Symbol Stamp for Safety and Safety Relief Valves D-VR2Outline of Basic Elements of Written Quality Control System for Repairers of ASME Safety and Safety Relief Valves D-VR3Nameplate Stamping for “VR” EOwner-user Inspection Agencies FInspection Forms

(c) Records of inspections and repairs shall be kept in accordance with the requirements of the ASME Boiler and Pressure Vessel Code and the National Board Inspection Code. The records shall be made available to the Secretary or his authorized representative.

(d) Sections of the ASME Boiler and Pressure Vessel Code, 1977, listed in paragraph (b)(1) of this section, and chapters and appendices of the National Board Inspection Code, 1979, listed in paragraph (b)(2) of this section, are incorporated by reference and made a part of this standard. These publications may be obtained from the publishers, the American Society of Mechanical Engineers, 22 Law Drive, P.O. Box 2900, Fairfield, New Jersey 07007, Phone: 800-843-2763 (toll free); http://www.asme.org, and the National Board of Boiler and Pressure Vessel Inspectors, 1055 Crupper Avenue, Columbus, Ohio 43229. The publications may be examined at any Metal and Nonmetal Mine Safety and Health District Office of the Mine Safety and Health Administration.

[50 FR 4054, Jan. 29, 1985, as amended at 71 FR 16667, Apr. 3, 2006]