[Congressional Bills 118th Congress]
[From the U.S. Government Publishing Office]
[H.R. 8533 Introduced in House (IH)]

<DOC>






118th CONGRESS
  2d Session
                                H. R. 8533

  To require the Administrator of the Federal Aviation Administration 
shall update the regulations to issue regulations to phase out the use 
   of bleed air systems in certain aircraft, and for other purposes.


_______________________________________________________________________


                    IN THE HOUSE OF REPRESENTATIVES

                              May 23, 2024

  Mr. Frost (for himself, Mr. Garamendi, Mr. Lawler, Ms. Norton, Ms. 
Barragan, Mr. Robert Garcia of California, Ms. Lee of Pennsylvania, Mr. 
   Jackson of Illinois, Mr. Lieu, Mrs. Watson Coleman, Mr. Garcia of 
Illinois, Mr. Deluzio, Mr. Soto, and Mr. Johnson of Georgia) introduced 
      the following bill; which was referred to the Committee on 
                   Transportation and Infrastructure

_______________________________________________________________________

                                 A BILL


 
  To require the Administrator of the Federal Aviation Administration 
shall update the regulations to issue regulations to phase out the use 
   of bleed air systems in certain aircraft, and for other purposes.

    Be it enacted by the Senate and House of Representatives of the 
United States of America in Congress assembled,

SECTION 1. SHORT TITLE.

    This Act may be cited as the ``Safe Air on Airplanes Act''.

SEC. 2. REGULATIONS ON BLEED AIR SYSTEMS IN CERTAIN AIRCRAFT..

    (a) Regulations Required.--Not later than 6 months after the date 
of enactment of this Act, the Administrator of the Federal Aviation 
Administration shall update the regulations under part 25 of title 14, 
Code of Federal Regulations, and any other applicable regulations, to--
            (1) prohibit new type certified turbine and turbo-prop 
        aircraft designs from using bleed air systems;
            (2) require that, beginning on the date that is 7 years 
        after the date of enactment of this Act, any bleed air system 
        in a newly manufactured aircraft is fitted with a filter or 
        combination of filter and air cleaning device designed and 
        demonstrated to remove gaseous and particulate components of 
        oil fumes; and
            (3) provide for a phase-out of the use of bleed air systems 
        in the manufacture of existing type designs of turbine and 
        turbo-prop driven aircraft according to the following:
                    (A) Not later than 10 years after the date of 
                enactment of this Act, 25 percent of such aircraft 
                shall be manufactured without bleed air systems.
                    (B) Not later than 20 years after the date of 
                enactment of this Act, 50 percent of such aircraft 
                shall be manufactured without bleed air systems.
                    (C) Not later than 30 years after the date of 
                enactment of this Act, 100 percent of such aircraft 
                shall be manufactured without bleed air systems.
    (b) Definition of Bleed Air System.--In this Act, the term ``bleed 
air system'' means an air system that--
            (1) uses compressed air that is taken from an aircraft 
        engine, or auxiliary power unite compressor stage, that is 
        upstream of the combustion chamber or on a shaft driven by a 
        turbine engine; and
            (2) provides pressurized air to the aircraft pneumatic 
        system that passengers or crew could foreseeably inhale or come 
        in contact with during the operation of the aircraft for 
        applications including ventilation.
                                 <all>