[Congressional Bills 116th Congress]
[From the U.S. Government Publishing Office]
[H.R. 4230 Reported in House (RH)]

<DOC>





                                                 Union Calendar No. 383
116th CONGRESS
  2d Session
                                H. R. 4230

                          [Report No. 116-477]

To amend the Energy Independence and Security Act of 2007 to establish 
   a program to incentivize innovation and to enhance the industrial 
  competitiveness of the United States by developing technologies to 
    reduce emissions of nonpower industrial sectors, and for other 
                               purposes.


_______________________________________________________________________


                    IN THE HOUSE OF REPRESENTATIVES

                           September 6, 2019

   Mr. Casten of Illinois (for himself, Mr. McKinley, Ms. Johnson of 
 Texas, Mrs. Radewagen, Mr. Fitzpatrick, and Mr. Tonko) introduced the 
following bill; which was referred to the Committee on Science, Space, 
                             and Technology

                            August 14, 2020

 Additional sponsors: Mrs. Luria, Mr. Lujan, Mr. Veasey, Ms. Bonamici, 
 Ms. Brownley of California, Mr. Levin of California, Mr. Swalwell of 
 California, Ms. Spanberger, Mr. Reed, Ms. Sherrill, Mr. Huffman, Mr. 
 Cuellar, Mr. Visclosky, Ms. Wasserman Schultz, Mr. Bacon, Mr. Pappas, 
   Ms. Stevens, Ms. Stefanik, Mr. Case, Mr. Foster, Ms. Pingree, Mr. 
Rouda, Mr. Vargas, Ms. Clarke of New York, Mr. Thompson of Mississippi, 
Mr. Sires, Ms. Wild, Mr. Suozzi, Mr. Peters, Ms. Slotkin, Mr. Gonzalez 
    of Texas, Mr. Michael F. Doyle of Pennsylvania, Ms. Norton, Ms. 
 Houlahan, Mr. Kim, Mrs. Axne, Ms. Wexton, Mr. Lipinski, Mr. McAdams, 
                 Mr. Rooney of Florida, and Ms. Haaland

                            August 14, 2020

  Reported with an amendment, committed to the Committee of the Whole 
       House on the State of the Union, and ordered to be printed
 [Strike out all after the enacting clause and insert the part printed 
                               in italic]
    [For text of introduced bill, see copy of bill as introduced on 
                           September 6, 2019]


_______________________________________________________________________

                                 A BILL


 
To amend the Energy Independence and Security Act of 2007 to establish 
   a program to incentivize innovation and to enhance the industrial 
  competitiveness of the United States by developing technologies to 
    reduce emissions of nonpower industrial sectors, and for other 
                               purposes.


 


    Be it enacted by the Senate and House of Representatives of the 
United States of America in Congress assembled,

SECTION 1. SHORT TITLE.

    This Act may be cited as the ``Clean Industrial Technology Act of 
2019'' or the ``CIT Act of 2019''.

SEC. 2. PURPOSE.

    The purpose of this Act and the amendments made by this Act is to 
encourage the development and evaluation of innovative technologies 
aimed at increasing--
            (1) the technological and economic competitiveness of 
        industry and manufacturing in the United States; and
            (2) the emissions reduction of nonpower industrial sectors.

SEC. 3. INDUSTRIAL EMISSIONS REDUCTION TECHNOLOGY DEVELOPMENT PROGRAM.

    (a) In General.--The Energy Independence and Security Act of 2007 
is amended by inserting after section 453 (42 U.S.C. 17112) the 
following:

``SEC. 454. INDUSTRIAL EMISSIONS REDUCTION TECHNOLOGY DEVELOPMENT 
              PROGRAM.

    ``(a) Definitions.--In this section:
            ``(1) Director.--The term `Director' means the Director of 
        the Office of Science and Technology Policy.
            ``(2) Eligible entity.--The term `eligible entity' means--
                    ``(A) a scientist or other individual with 
                knowledge and expertise in emissions reduction;
                    ``(B) an institution of higher education;
                    ``(C) a nongovernmental organization;
                    ``(D) a National Laboratory;
                    ``(E) a private entity; and
                    ``(F) a partnership or consortium of 2 or more 
                entities described in subparagraphs (B) through (E).
            ``(3) Emissions reduction.--
                    ``(A) In general.--The term `emissions reduction' 
                means the reduction, to the maximum extent practicable, 
                of net nonwater greenhouse gas emissions to the 
                atmosphere by energy services and industrial processes.
                    ``(B) Exclusion.--The term `emissions reduction' 
                does not include the elimination of carbon embodied in 
                the principal products of industrial manufacturing.
            ``(4) Institution of higher education.--The term 
        `institution of higher education' has the meaning given the 
        term in section 101 of the Higher Education Act of 1965 (20 
        U.S.C. 1001).
            ``(5) Program.--The term `program' means the program 
        established under subsection (b)(1).
    ``(b) Industrial Emissions Reduction Technology Development 
Program.--
            ``(1) In general.--Not later than 1 year after the date of 
        enactment of the CIT Act of 2019, the Secretary, in 
        coordination with the Director and in consultation with the 
        heads of relevant Federal agencies, National Laboratories, 
        industry, and institutions of higher education, shall establish 
        a crosscutting research, development, and demonstration program 
        to further the development and commercial application of 
        innovative industrial emissions reduction technologies that--
                    ``(A) increase the technological and economic 
                competitiveness of industry and manufacturing in the 
                United States; and
                    ``(B) achieve emissions reduction in nonpower 
                industrial sectors.
            ``(2) Coordination.--In carrying out the program, the 
        Secretary shall, to the maximum extent practicable--
                    ``(A) coordinate with each relevant office in the 
                Department and any other Federal agency;
                    ``(B) coordinate and collaborate with the 
                Industrial Technology Innovation Advisory Committee 
                established under section 455; and
                    ``(C) coordinate with the energy-intensive 
                industries program established under section 452.
            ``(3) Leverage of existing resources.--In carrying out the 
        program, the Secretary shall leverage, to the maximum extent 
        practicable--
                    ``(A) existing resources and programs of the 
                Department and other relevant Federal agencies; and
                    ``(B) public-private partnerships.
    ``(c) Focus Areas.--The program shall focus on, to the maximum 
extent practicable,--
            ``(1) industrial production processes, including 
        technologies and processes that--
                    ``(A) achieve emissions reduction in high-emissions 
                industrial materials production processes, including 
                production processes for iron, steel, steel mill 
                products, aluminum, cement, concrete, glass, pulp, 
                paper, and industrial ceramics;
                    ``(B) achieve emissions reduction in medium- and 
                high-temperature heat generation, including--
                            ``(i) through electrification of heating 
                        processes;
                            ``(ii) through renewable heat generation 
                        technology;
                            ``(iii) through combined heat and power; 
                        and
                            ``(iv) by switching to alternative fuels, 
                        including hydrogen;
                    ``(C) achieve emissions reduction in chemical 
                production processes;
                    ``(D) leverage smart manufacturing technologies and 
                principles, digital manufacturing technologies, and 
                advanced data analytics to develop advanced 
                technologies and practices in information, automation, 
                monitoring, computation, sensing, modeling, and 
                networking that--
                            ``(i) simulate manufacturing production 
                        lines;
                            ``(ii) monitor and communicate production 
                        line status;
                            ``(iii) manage and optimize energy 
                        productivity and cost throughout production; 
                        and
                            ``(iv) model, simulate, and optimize the 
                        energy efficiency of manufacturing processes;
                    ``(E) leverage the principles of sustainable 
                manufacturing and sustainable chemistry to minimize the 
                negative environmental impacts of manufacturing while 
                conserving energy and resources, including--
                            ``(i) by designing products that enable 
                        reuse, refurbishment, remanufacturing, and 
                        recycling;
                            ``(ii) by minimizing waste from industrial 
                        processes; and
                            ``(iii) by reducing resource intensity; and
                    ``(F) increase the energy efficiency of industrial 
                processes;
            ``(2) alternative materials that produce fewer emissions 
        during production and result in fewer emissions during use, 
        including--
                    ``(A) high-performance lightweight materials; and
                    ``(B) substitutions for critical materials and 
                minerals;
            ``(3) development of net-zero emissions liquid and gaseous 
        fuels;
            ``(4) emissions reduction in shipping, aviation, and long 
        distance transportation, including through the use of 
        alternative fuels;
            ``(5) carbon capture technologies for industrial processes;
            ``(6) high-performance computing to develop advanced 
        materials and manufacturing processes contributing to the focus 
        areas described in paragraphs (1) through (5), including--
                    ``(A) modeling, simulation, and optimization to 
                design energy efficient and sustainable products; and
                    ``(B) the use of digital prototyping and additive 
                manufacturing to enhance product design;
            ``(7) other technologies that achieve net-zero emissions in 
        nonpower industrial sectors as determined by Secretary in 
        coordination with the Director;
            ``(8) incorporation of sustainable and green chemistry and 
        engineering principles, practices, and methodologies, as the 
        Secretary determines appropriate; and
            ``(9) other research or technology areas identified in the 
        Emissions Reduction Roadmap authorized in section 455.
    ``(d) Grants, Contracts, Cooperative Agreements, and Demonstration 
Projects.--
            ``(1) Grants.--In carrying out the program, the Secretary 
        shall award grants on a competitive basis to eligible entities 
        for projects that the Secretary determines would best achieve 
        the goals of the program.
            ``(2) Contracts and cooperative agreements.--In carrying 
        out the program, the Secretary may enter into contracts and 
        cooperative agreements with eligible entities and Federal 
        agencies for projects that the Secretary determines would 
        further the purposes of the program.
            ``(3) Demonstration projects.--In supporting technologies 
        developed under this section, the Secretary shall fund 
        demonstration projects that test and validate technologies 
        described in subsection (c).
            ``(4) Cost sharing.--In awarding funds under this section, 
        the Secretary shall require cost sharing in accordance with 
        section 988 of the Energy Policy Act of 2005 (42 U.S.C. 16352).
    ``(e) Authorization of Appropriations.--There are authorized to be 
appropriated to the Secretary to carry out the demonstration projects 
authorized in subsection (d)(3)--
            ``(1) $20,000,000 for fiscal year 2020;
            ``(2) $80,000,000 for fiscal year 2021;
            ``(3) $100,000,000 for fiscal year 2022;
            ``(4) $150,000,000 for fiscal year 2023; and
            ``(5) $150,000,000 for fiscal year 2024.
    ``(f) Coordination.--The Secretary shall carry out the activities 
authorized in this section in accordance with section 203 of the 
Department of Energy Research and Innovation Act (42 U.S.C. 18631).''.
    (b) Technical Amendment.--The table of contents of the Energy 
Independence and Security Act of 2007 (Public Law 110-140; 121 Stat. 
1494) is amended by inserting after the item relating to section 453 
the following:

``Sec. 454. Industrial emissions reduction technology development 
                            program.''.

SEC. 4. INDUSTRIAL TECHNOLOGY INNOVATION ADVISORY COMMITTEE.

    (a) In General.--The Energy Independence and Security Act of 2007 
is amended by inserting after section 454 (as added by section 3(a)) 
the following:

``SEC. 455. INDUSTRIAL TECHNOLOGY INNOVATION ADVISORY COMMITTEE.

    ``(a) Definitions.--In this section:
            ``(1) Committee.--The term `Committee' means the Industrial 
        Technology Innovation Advisory Committee established under 
        subsection (b).
            ``(2) Director.--The term `Director' means the Director of 
        the Office of Science and Technology Policy.
            ``(3) Emissions reduction.--The term `emissions reduction' 
        has the meaning given the term in section 454(a).
            ``(4) Program.--The term `program' means the industrial 
        emissions reduction technology development program established 
        under section 454(b)(1).
    ``(b) Establishment.--Not later than 180 days after the date of 
enactment of the CIT Act of 2019, the Secretary, in coordination with 
the Director, shall establish an advisory committee, to be known as the 
`Industrial Technology Innovation Advisory Committee'.
    ``(c) Membership.--
            ``(1) Appointment.--The Committee shall be comprised of not 
        fewer than 15 members, who shall be appointed by the Secretary, 
        in coordination with the Director.
            ``(2) Representation.--Members appointed pursuant to 
        paragraph (1) shall include--
                    ``(A) not less than 1 representative of each 
                relevant Federal agency, as determined by the 
                Secretary;
                    ``(B) not less than 2 representatives of labor 
                groups;
                    ``(C) not less than 3 representatives of the 
                research community, which shall include academia and 
                National Laboratories;
                    ``(D) not less than 2 representatives of 
                nongovernmental organizations;
                    ``(E) not less than 6 representatives of industry, 
                the collective expertise of which shall cover every 
                focus area described in section 454(c);
                    ``(F) not less than 1 representative of a State 
                government; and
                    ``(G) any other individual whom the Secretary, in 
                coordination with the Director, determines to be 
                necessary to ensure that the Committee is comprised of 
                a diverse group of representatives of industry, 
                academia, independent researchers, and public and 
                private entities.
            ``(3) Chair.--The Secretary shall designate a member of the 
        Committee to serve as Chair.
    ``(d) Duties.--
            ``(1) In general.--The Committee shall--
                    ``(A) in consultation with the Secretary and the 
                Director, develop the missions and goals of the 
                program, which shall be consistent with the purposes of 
                the program described in section 454(b)(1);
                    ``(B) advise the Secretary and the Director with 
                respect to the program--
                            ``(i) by identifying and evaluating any 
                        technologies being developed by the private 
                        sector or other Federal agencies relating to 
                        the focus areas described in section 454(c);
                            ``(ii) by identifying technology gaps in 
                        the private sector in those focus areas, and 
                        making recommendations to address those gaps;
                            ``(iii) by surveying and analyzing factors 
                        that prevent the adoption of emissions 
                        reduction technologies by the private sector; 
                        and
                            ``(iv) by recommending technology screening 
                        criteria for technology developed under the 
                        program to encourage adoption of the technology 
                        by the private sector; and
                    ``(C) develop the roadmap described in paragraph 
                (2).
            ``(2) Emissions reduction roadmap.--
                    ``(A) Purpose.--The purpose of the roadmap 
                developed under paragraph (1)(C) is to set forth a plan 
                for achieving the goals of the program established in 
                section 454(b)(1), including for the focus areas 
                described in section 454(c).
                    ``(B) Contents.--The roadmap developed under 
                paragraph (1)(C) shall--
                            ``(i) specify near-term and long-term 
                        qualitative and quantitative objectives 
                        relating to each focus area described in 
                        section 454(c), including research, 
                        development, demonstration, and commercial 
                        application objectives;
                            ``(ii) leverage existing roadmaps relevant 
                        to the program in section 454(b)(1) and the 
                        focus areas in section 454(c);
                            ``(iii) specify the anticipated timeframe 
                        for achieving the objectives specified under 
                        clause (i);
                            ``(iv) include plans for developing 
                        emissions reduction technologies that are 
                        globally cost-competitive; and
                            ``(v) identify the appropriate role for 
                        investment by the Federal Government, in 
                        coordination with the private sector, to 
                        achieve the objectives specified under clause 
                        (i).
    ``(e) Meetings.--
            ``(1) Frequency.--The Committee shall meet not less 
        frequently than 2 times per year, at the call of the Chair.
            ``(2) Initial meeting.--Not later than 30 days after the 
        date on which the members are appointed under subsection (b), 
        the Committee shall hold its first meeting.
    ``(f) Committee Report.--
            ``(1) In general.--Not later than 2 years after the date of 
        enactment of the CIT Act of 2019, and not less frequently than 
        once every 3 years thereafter, the Committee shall submit to 
        the Secretary a report on the progress of achieving the 
        purposes of the program.
            ``(2) Contents.--The report under paragraph (1) shall 
        include--
                    ``(A) a description of any technology innovation 
                opportunities identified by the Committee;
                    ``(B) a description of any technology gaps 
                identified by the Committee under subsection 
                (d)(1)(B)(ii);
                    ``(C) a review of the management, technology 
                screening, coordination, and industry utility of the 
                program;
                    ``(D) an evaluation of the progress of the program 
                and the research, development, and demonstration 
                activities funded under the program;
                    ``(E) any recommended changes to the focus areas of 
                the program described in section 454(c);
                    ``(F) a description of the manner in which the 
                Committee has carried out the duties described in 
                subsection (d)(1) and any relevant findings as a result 
                of carrying out those duties;
                    ``(G) the roadmap developed by the Committee under 
                subsection (d)(1)(C);
                    ``(H) the progress made in achieving the goals set 
                out in that roadmap;
                    ``(I) an assessment of the extent to which progress 
                has been made under the program in developing 
                commercial, cost-competitive technologies in each focus 
                area described in section 454(c); and
                    ``(J) an assessment of the effectiveness of the 
                program in coordinating efforts within the Department 
                and with other Federal agencies to achieve the purposes 
                of the program.
    ``(g) Report to Congress.--Not later than 60 days after receiving a 
report from the Committee under subsection (f), the Secretary shall 
submit a copy of that report to the Committee on Science, Space, and 
Technology of the House of Representatives, and the Committee on Energy 
and Natural Resources of the Senate.
    ``(h) Applicability of Federal Advisory Committee Act.--Except as 
otherwise provided in this section, the Federal Advisory Committee Act 
(5 U.S.C. App.) shall apply to the Committee.''.
    (b) Technical Amendment.--The table of contents of the Energy 
Independence and Security Act of 2007 (Public Law 110-140; 121 Stat. 
1494) (as amended by section 3(b)) is amended by inserting after the 
item relating to section 454 the following:

``Sec. 455. Industrial Technology Innovation Advisory Committee.''.

SEC. 5. TECHNICAL ASSISTANCE PROGRAM TO IMPLEMENT INDUSTRIAL EMISSIONS 
              REDUCTION.

    (a) In General.--The Energy Independence and Security Act of 2007 
is amended by inserting after section 455 (as added by section 4(a)) 
the following:

``SEC. 456. TECHNICAL ASSISTANCE PROGRAM TO IMPLEMENT INDUSTRIAL 
              EMISSIONS REDUCTION.

    ``(a) Definitions.--In this section:
            ``(1) Eligible entity.--The term `eligible entity' means--
                    ``(A) a State;
                    ``(B) a unit of local government;
                    ``(C) a territory or possession of the United 
                States;
                    ``(D) a relevant State or local office, including 
                an energy office;
                    ``(E) a tribal organization (as defined in section 
                3765 of title 38, United States Code);
                    ``(F) an institution of higher education;
                    ``(G) a private entity; and
                    ``(H) a trade association or technical society.
            ``(2) Emissions reduction.--The term `emissions reduction' 
        has the meaning given the term in section 454(a).
            ``(3) Institution of higher education.--The term 
        `institution of higher education' has the meaning given the 
        term in section 101 of the Higher Education Act of 1965 (20 
        U.S.C. 1001).
            ``(4) Program.--The term `program' means the program 
        established under subsection (b).
    ``(b) Establishment.--Not later than one year after the date of 
enactment of the CIT Act of 2019, the Secretary shall establish a 
program to provide technical assistance to eligible entities to promote 
the commercial application of emission reduction technologies developed 
through the program established in section 454(b).
    ``(c) Applications.--
            ``(1) Application process.--The Secretary shall seek 
        applications for technical assistance under the program on a 
        periodic basis, but not less frequently than once every 12 
        months.
            ``(2) Priorities.--In selecting eligible entities for 
        technical assistance under the program, the Secretary shall 
        give priority to an eligible entity--
                    ``(A) carrying out a commercial application of 
                technology that has the greatest potential for 
                emissions reduction in nonpower industrial sectors;
                    ``(B) located in a State that has historically 
                relied on industrial sectors for a substantial portion 
                of the State economy, as determined by the Secretary, 
                taking into account employment data, per capita income, 
                and other indicators of economic output in the State; 
                or
                    ``(C) located in a State that has experienced 
                significant decline in the economic contribution of 
                industry to the State.''.
    (b) Technical Amendment.--The table of contents of the Energy 
Independence and Security Act of 2007 (Public Law 110-140; 121 Stat. 
1494) (as amended by section 4(b)) is amended by inserting after the 
item relating to section 455 the following:

``Sec. 456. Technical assistance program to implement industrial 
                            emissions reduction.''.

SEC. 6. COORDINATION OF RESEARCH AND DEVELOPMENT OF ENERGY EFFICIENT 
              TECHNOLOGIES FOR INDUSTRY.

    Section 6(a) of the American Energy Manufacturing Technical 
Corrections Act (42 U.S.C. 6351(a)) is amended--
            (1) by striking ``Industrial Technologies Program'' each 
        place it appears and inserting ``Advanced Manufacturing 
        Office''; and
            (2) in the matter preceding paragraph (1), by striking 
        ``Office of Energy'' and all that follows through ``Office of 
        Science'' and inserting ``Department of Energy''.
                                                 Union Calendar No. 383

116th CONGRESS

  2d Session

                               H. R. 4230

                          [Report No. 116-477]

_______________________________________________________________________

                                 A BILL

To amend the Energy Independence and Security Act of 2007 to establish 
   a program to incentivize innovation and to enhance the industrial 
  competitiveness of the United States by developing technologies to 
    reduce emissions of nonpower industrial sectors, and for other 
                               purposes.

_______________________________________________________________________

                            August 14, 2020

  Reported with an amendment, committed to the Committee of the Whole 
       House on the State of the Union, and ordered to be printed