Short Title

This Act shall be known as the Original Saint-Gaudens Double Eagle Ultra-High Relief Palladium Bullion Coin Act .

Findings

The Congress finds that— (1)the Augustus Saint-Gaudens $20 gold pieces of 1907 with ultra-high relief are considered by many in the numismatic community to be the most beautiful coins ever produced; (2)two separate pattern versions of the ultra-high relief Double Eagle were produced in 1907; (3)a 34-millimeter version was hand-struck on a standard Double Eagle planchet using a medal press and, because manufacturing and technical limitations prevented mass production of these pieces, this production resulted in low mintage, with fewer than two dozen specimens of the 34-millimeter version known to be in existence today; (4)a second, 27-millimeter, version was struck using two stacked $10 Eagle planchets; (5)these experimental pattern 27-millimeter pieces were deemed to be illegal to produce and all specimens were destroyed except for 2 that reside in the Smithsonian’s National Numismatic Collection; (6)the 27-millimeter pattern pieces are ranked by numismatists as among the most beautiful coins ever produced, but none are in private hands and none have ever come up for sale; (7)the ultra-high relief Double Eagles are representative of the greatest period of American coinage, the so-called Golden Age of Coinage in the United States, initiated by President Theodore Roosevelt, with the assistance of noted sculptors and medallic artists James Earle Fraser and Augustus Saint-Gaudens; (8)the introduction of this famous piece as a numismatic proof coin would not only give collectors an opportunity to own a version of a legendary coin that has never before been available for private ownership, but also inaugurate a neo-renaissance in United States coin design and demonstrate the technological advances that the United States has achieved over the last century; (9)the modern coin version of the $20 gold piece would be updated with the addition of the inscription In God We Trust and would include the date of minting or issuance, to distinguish it from the originals and prevent counterfeiting; (10)palladium is a rare silver-white metal, and is considered a precious metal because of its scarcity; (11)palladium is one of 6 platinum group metals that include ruthenium, rhodium, osmium, iridium, and platinum; it is the least dense and has the lowest melting point of the platinum group metals; (12)the major nations mining palladium are in order of volume: Russia, South Africa, United States of America, and Canada; (13)the major mine producing palladium in the United States is located in Montana; (14)palladium is fabricated into a wide range of applications that includes its extensive use as an industrial catalyst and a key component in the manufacturing of automotive catalytic converters; (15)palladium is also used in dentistry, jewelry, and in the production of surgical instruments and electrical contacts; (16)the demand for precious metals is driven not only by their practical use, but also by their role as a store of value; (17)a variety of investment options are available to palladium investors that includes coins, bars, and exchange-traded funds; (18)palladium coins have been issued by several countries, mainly as commemorative coins, but also as bullion investment coins (bullion is the form of palladium traded for investment purposes and is a reference to its purity); (19)Tonga commenced issuing palladium coins in 1967 and other issuing countries have included Canada, the Soviet Union, France, Russia, China, Australia, and Slovakia; (20)today, only Canada mints palladium bullion coins; (21)during the period 2003 through 2007, the price of palladium ranged between $148 and $404 per troy ounce, and the average price in 2007 was $355 per troy ounce; (22)by contrast, during the same period, the price of platinum ranged between a low of $603 and a high $1,544, and the average price in 2007 was $1,303 per troy ounce; (23)thus, platinum bullion coins have become too expensive for the average investor; (24)The Royal Canadian Mint minted platinum bullion coins for 14 years (between 1988 and 2001), but ceased production in the face of high metal prices and declining sales; (25)when the United States Mint’s American Eagle Platinum Bullion Coin was launched in 1997, the average price for the metal that year was $395 per troy ounce; and (26)over the past decade, the price has more than tripled, which has caused a dramatic decline in demand for these coins, from 80,050 ounces sold in 1997 to 9,050 in 2007.

Original saint-gaudens double eagle ultra-high relief bullion coin

Section 5112 of title 31, United States Code, is amended— (1)in subsection (a), by adding at the end the following new paragraph:

(12)A $20 coin that— (A)is 27 millimeters in diameter; (B)weighs 1 ounce; (C)is of an appropriate thickness, as determined by the Secretary; and (D)bears, on the obverse and reverse, the designs of the famous 27-millimeter version of the 1907 Augustus Saint-Gaudens Double Eagle gold piece, as described in subsection (t).

; and

(2)by adding at the end, the following new subsection:

(t)

Original Saint-Gaudens double eagle ultra-high relief numismatic coins and bullion investment coins

(1)

In general

Beginning January 1, 2009, the Secretary shall commence minting and issuing for sale— (A)such number of $20 bullion investment coins as the Secretary may determine to be appropriate, that bear the design described in paragraph (2); and (B)not more than 15,000 of the numismatic $20 coins that bear the design and meet the requirements of paragraph (3). (2)

Design and requirements for bullion investment coins

(A)

In general

Except as provided under subparagraph (B), the obverse and reverse of the coins minted and issued pursuant to paragraph (1)(A) shall bear a close approximation of the original obverse and reverse designs by Augustus Saint-Gaudens which appear on the famous 27-millimeter version of the 1907 Double Eagle ultra-high relief gold piece. (B)

Variations

The coins referred to in subparagraph (A) shall— (i)have inscriptions of the weight of the coin and the purity of the alloy in the coin raised on the edge of the coin; (ii)bear the nominal denomination of the coin; (iii)bear the date of issue of the coin on the obverse, expressed as a Roman numeral as in the original design; and (iv)bear such other inscriptions, including In God We Trust, as the Secretary determines to be appropriate and in keeping with the original design. (C)

Mint facility

Any facility of the United States Mint may be used to strike coins minted pursuant to paragraph (1)(A) other than the United States mint at West Point, New York. (3)

Design and requirements for ultra-high relief numismatic coins

(A)

In general

Subject to subparagraph (B), the obverse and reverse of the coins minted and issued pursuant to paragraph (1)(B) shall bear exact replicas of the original obverse and reverse designs by Augustus Saint-Gaudens which appear on the famous 27-millimeter version of the 1907 Double Eagle ultra-high relief gold piece and the edge of the coin shall have all appropriate raised lettering in the same manner as the original coin. (B)

Variations

The coins referred to in subparagraph (A) shall— (i)bear a single finish that most closely approximate the finish of the original gold 1907 ultra-high relief gold piece as is practicable; (ii)bear the nominal denomination of the coin; (iii)bear the date of issue of the coin on the obverse, expressed as a Roman numeral as in the original design; and (iv)bear such other inscriptions, including In God We Trust, as the Secretary determines to be appropriate and in keeping with the original design. (C)

Mint facility

Coins minted pursuant to paragraph (1)(B) may only be struck at the United States mint at West Point, New York. (D)

Fractional coins prohibited

No coins issued pursuant to paragraph (1)(B), shall be made available as so-called fractional coins. (4)

Distribution in sets and other coordination requirements

If the Secretary chooses, in accordance with subsection (i), to mint and issue a gold bullion coin that bears the same design as the ultra-high relief numismatic coins described in paragraph (1)(B)— (A)each palladium coin issued under paragraph (1)(B) may only be issued in a set containing 1 of each such coins; (B)each set of coins described in subparagraph (A) shall be provided in a presentation case of appropriate design; (C)the set described in subparagraph (A) may only be issued and sold in 2009; (D)gold coins issued in any set described in subparagraph (A) may only be struck at the United States mint at West Point, New York and no other gold coin issued by the Secretary that bears the same design as the ultra-high relief numismatic coins described in paragraph (1)(B) may be struck at such mint at West Point; and (E)no gold coin that bears the same design as the ultra-high relief numismatic coins described in paragraph (1)(B) shall be made available as so-called fractional coins. (5)

Composition

(A)

In general

The coins minted under this subsection shall contain .995 pure palladium. (B)

Source of bullion

(i)

In general

The Secretary shall acquire bullion for the palladium coins issued under this subsection by purchase of palladium mined from natural deposits in the United States, or in a territory or possession of the United States, within 1 year after the month in which the ore from which it is derived was mined. (ii)

Price of bullion

The Secretary shall pay not more than the average world price for the palladium under subparagraph (A). (6)

Sale of coins

Each coin issued under this subsection shall be sold for an amount the Secretary determines to be appropriate, but not less than the sum of— (A)the nominal denomination of the coin; (B)the market value of the bullion at the time of sale; and (C)the cost of designing and issuing the coins, including labor, materials, dies, use of machinery, overhead expenses, marketing, distribution, and shipping. (7)

Legal Tender

The coins minted under this title shall be legal tender, as provided in section 5103. (8)

Treatment as Numismatic items

For purposes of section 5134 and 5136, all coins minted under this subsection shall be considered to be numismatic items. (9)

Quality

The Secretary may issue the coins described in paragraph (1)(A) in both proof and uncirculated versions. (10)

Protective and anti-counterfeiting cover

(A)

In general

The Secretary shall give strong consideration to making the coins described in this subsection available only in protective covers that preserve the coins in the condition in which they are issued, allow clear and easy viewing of the obverse, reverse, and sides of the coin and protect it from movement within the holder, and also protect against counterfeiting of such coins or of the container. (B)

Acquisition

The Secretary may elect to comply with subparagraph (A) by producing and assembling such protective covers within the United States Mint or by contracting for the installation of such covers. (11)

Further anti-counterfeiting measures

(A)

Report required

In an attempt to forestall the counterfeiting or marketing of the coins described in this section, including this subsection, and of collectible, numismatic and rare coins in general, the Comptroller General shall, after consulting with the Director of the United States Secret Service and the Federal Trade Commission, and in consultation with hobbyists, numismatists, law enforcement agencies, and the Citizens Coinage Advisory Committee, shall submit to the Committee on Financial Services of the House of Representatives and the Committee on Banking, Housing, and Urban Affairs of the Senate, before the end of the 9-month period beginning on the date of the enactment of the Original Saint-Gaudens Double Eagle Ultra-High Relief Bullion Coin Act, a report detailing the extent of counterfeiting of rare, collectible or numismatic coins made available for sale in the United States, regardless of the country where the original of such coin was produced or of the country in which the counterfeiting takes place, or sales overseas if such counterfeit coins are unauthorized copies of coins originally produced by the United States Mint. (B)

Contents of report

The report submitted under subparagraph (A) shall describe the following: (i)The extent of such counterfeiting of coins and numismatic items. (ii)The source of such counterfeiting, if known, including which countries may be the origin of such counterfeits if they are produced outside the United States. (iii)The distribution and marketing channels for such counterfeits within and without the United States. (iv)The effect of any such counterfeiting on hobbyists, numismatists and on the investment opportunities for bullion or numismatic coins produced by the United States Mint. (v)Whether such counterfeiting extends to the counterfeiting of coin-grading or protective materials in such a way that might imply that the counterfeit inside had been examined and authenticated by a reputable coin-grading firm. (vi)Such recommendations for legislative or administrative action as the Comptroller General may determine to be appropriate to curtail or forestall any such counterfeiting.